ZH
RU
ES
Gear detection method
Gear detection method, Total:98 items.
In the international standard classification, Gear detection method involves: Gears, Linear and angular measurements, Cutting tools, Acoustics and acoustic measurements, Pumps, Mechanical testing, Machine tools, Flexible drives and transmissions.
AGMA - American Gear Manufacturers Association, Gear detection method
- 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
- 2000FTM9-2000 Cylindrical and Bevel Gear Inspection - a Simple Task Using Dedicated CNC - Controlled Gear Inspection Machines
- 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines
- 2000-A88 ERTA-1989 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
- 2000-A88 ERTA-1990 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
- 2000-A88 ERTA-1992 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
- 98FTM1-1998 Method for Predicting the Dynamic Root Stresses of Helical Gear Teeth
- 390.02-1964 Gear Handbook Gear Classification@ Materials and Measuring Methods for Bevel@ Hypoid@ Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur@ Helical and Master Gears)
- 97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
- 931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
- ISO 10064-6-A10:2010 Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods
- 390.03A-1980 Gear Handbook Gear Classification@ Materials and Measuring Methods for Bevel@ Hypoid@ Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur@ Helical and Master Gears) (Errata - 1983)
- 08FTM15-2008 Extending the Benefits of Elemental Gear Inspection
- 14104-A17-2017 Gears – Surface Temper Etch Inspection After Grinding@ Chemical Method
- 2001-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- 2001-C95-1995 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- 2101-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- 14FTM13-2014 A Practical Approach for Modeling a Bevel Gear
- 2009-A98-1998 Bevel Gear Classification@ Tolerances@ and Measuring Methods
- 12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
- 11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
- 12FTM12-2012 Manufacturing Method of Pinion Member of Large-Sized Skew Bevel Gears Using Multi-Axis Control and Multi-Tasking Machine Tool
- 96FTM1-1996 Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears
- 2000-A88-1988 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents) (Errata - 01/90; Errata - 07/90; Errata - 05/92)
- 12FTM14-2012 Large Pinions for Open Gears: The Increase of Single Mesh Load - A New Challenge for Manufacturing and Quality Inspection
- 10FTM03-2010 A Novel Approach to the Refurbishment of Wind Turbine Gears
- 06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
- 06FTM11-2006 On Tooth Failure Analysis in Small--Teeth--Number Gearing: An Analytical Approach
IN-BIS, Gear detection method
Japanese Industrial Standards Committee (JISC), Gear detection method
- JIS B 1752:1989 Methods of measurement for spur and helical gears
- JIS B 1753:1976 Measuring method of noise of gears
- JIS B 8312:1991 Gear pumps and screw pumps -- Testing methods
- JIS B 1757-1:2012 Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts
- JIS B 1756:2017 Gears -- Surface temper etch inspection after grinding, chemical method
Korean Agency for Technology and Standards (KATS), Gear detection method
FI-SFS, Gear detection method
British Standards Institution (BSI), Gear detection method
- PD ISO/TR 10064-6:2009 Code of inspection practice. Bevel gear measurement methods
- BS ISO/TR 10064-4:1998 Code of inspection practice - Recommendations relative to surface texture and tooth contact pattern checking
- BS ISO/TR 10064-4:1999 Code of inspection practice. Recommendations relative to surface texture and tooth contact pattern checking
- PD ISO/TR 10064-1:2019 Code of inspection practice. Measurement of cylindrical gear tooth flanks
- BS ISO/TR 13989-2:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method
- BS ISO 14104:2014 Gears. Surface temper etch inspection after grinding, chemical method
- BS ISO 14104:2017 Gears. Surface temper etch inspection after grinding, chemical method
RU-GOST R, Gear detection method
- GOST 8.490-1983 State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification
- GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
- GOST 13576-1981 Chain wheels for driving tooth chains. Method of calculation and constraction of tooth form. Tolerances
American Gear Manufacturers Association, Gear detection method
- AGMA 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines
- AGMA ISO 10064-6-A10:2010 Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods
- AGMA 97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
- AGMA 913-A98-1998 Method for Specifying the Geometry of Spur and Helical Gears
- AGMA 946-A21-2021 Test Methods for Plastic Gears
- AGMA ISO 10064-1-A21:2020 Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks
- AGMA 931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
- AGMA 2001-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- AGMA 2101-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- AGMA 93FTM4-1993 Stress Analysis of Spiral Bevel Gears A Novel Approach to Tooth Modelling
- AGMA 96FTM1-1996 Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears
- AGMA 14FTM13-2014 A Practical Approach for Modeling a Bevel Gear
- AGMA 11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
- AGMA 12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
- AGMA 12FTM12-2012 Manufacturing Method of Pinion Member of Large-Sized Skew Bevel Gears Using Multi-Axis Control and Multi-Tasking Machine Tool
- AGMA 06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
- AGMA 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
- AGMA 12FTM14-2012 Large Pinions for Open Gears: The Increase of Single Mesh Load - A New Challenge for Manufacturing and Quality Inspection
Association Francaise de Normalisation, Gear detection method
Professional Standard - Machinery, Gear detection method
CZ-CSN, Gear detection method
- CSN 01 4686 Cast.4-1988 Calculation of load capacity of spur and bevel gears.Preliminary estimation of gear dimens- ions; simplified method of calculation
International Organization for Standardization (ISO), Gear detection method
- ISO/TR 10064-6:2009 Code of inspection practice - Part 6: Bevel gear measurement methods
- ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
- ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
Association of German Mechanical Engineers, Gear detection method
- VDI/VDE 2608-2001 Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels
工业和信息化部/国家能源局, Gear detection method
- JB/T 10231.5-2016 Standard testing methods for cutting tool products Part 5: Gear hobs
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gear detection method
国家市场监督管理总局、中国国家标准化管理委员会, Gear detection method
Professional Standard - Aerospace, Gear detection method
American National Standards Institute （ANSI), Gear detection method
- ANSI/AGMA 2101-D-2004 Fundamental rating Factors and Calculation methods for Involute Spur and Helical Gear Teeth
- ANSI/AGMA 2001-D-2004 Fundamental Rating Factors and Calculation Methods for Spur and Helical Gear Teeth
- ANSI/AGMA 2001-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
- ANSI/AGMA 2101-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
Professional Standard - Electron, Gear detection method
- SJ/T 31012-1994 Requirements of readiness and methods of inspection and assessment for gear tooth chamfering machines
- SJ/T 31011-1994 Requirements of readiness and methods of inspection and assessment for gear cutting machines
GOSTR, Gear detection method
International Federation of Trucks and Engines, Gear detection method
Danish Standards Foundation, Gear detection method
CH-SNV, Gear detection method