ZH
RU
ES

Bending Test Control

Bending Test Control, Total:499 items.

In the international standard classification, Bending Test Control involves: Rubber and plastics products, Electrical wires and cables, Fibre optic communications, Testing of metals, Leather technology, Construction materials, Wood, sawlogs and sawn timber, Mechanical testing, Raw materials for rubber and plastics, Linear and angular measurements, Surface treatment and coating, Structures of buildings, Materials for aerospace construction, Ceramics, Welding, brazing and soldering, Wood technology processes, Reinforced plastics, Pipeline components and pipelines, Iron and steel products, Road vehicle systems, Vibrations, shock and vibration measurements, Elements of buildings, Paints and varnishes, Glass, Analytical chemistry, Paint coating processes, Cellular materials, Equipment for entertainment, Solar energy engineering, Plastics, Gears, Paper and board, Semiconducting materials, Electrical accessories, Rubber, Products of the textile industry, Semi-manufactures of timber, Shipbuilding and marine structures in general, Wood-based panels, Footwear, Conducting materials, Tyres, Gas and steam turbines. Steam engines, Medical equipment, Meat, meat products and other animal produce, Earthworks. Excavations. Foundation construction. Underground works, Test conditions and procedures in general, Farming and forestry, Road engineering.

Association Francaise de Normalisation, Bending Test Control

• NF T54-504:1976 Light plastics products. Bending test.
• NF P18-407:1981 Concretes. Binding test.
• NF B51-009:1985 Wood. Dynamic bending test.
• NF A03-158:2005 Metallic materials - Bend test.
• NF A03-158:2016 Metallic materials - Bend test
• NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
• NF EN 13523-7:2021 Tôles prélaquées - Méthodes d'essai - Partie 7 : résistance à la fissuration par pliage (essai de pliage en T)
• NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
• NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
• NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
• NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
• NF T30-105*NF EN ISO 17132:2007 Paints and varnishes - T-bend test
• NF A03-402:1983 Iron and steel. Fatigue test by rotary flexion.
• NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
• NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
• NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
• NF A03-157:1978 IRON AND STEEL. BEND TEST ON STEEL.
• NF P30-302:1963 Roofing. General details. Bend break test of corrugated sheet.
• NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
• P08-353:1987 Roofs made of components. Bending test under concentrated load.
• NF ISO 4666-4:2018 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 4 : flexomètre à contrainte constante
• NF T30-040*NF EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
• NF T30-040:1995 Paints and varnishes. Bend test (cylindrical mandrel).
• NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
• NF B10-510:1973 QUARRY PRODUCTS. LIMESTONES. BENDING TEST.
• NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
• NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
• NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.
• NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
• NF T30-078*NF EN ISO 6860:2007 Paints and varnishes - Bend test (conical mandrel)
• NF G62-027*NF EN ISO 24266:2020 Footwear - Test methods for whole shoe - Flexing durability
• NF T30-078:1995 Paints and varnishes. Bend test (conical mandrel).
• NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.

SAE - SAE International, Bending Test Control

• SAE ARP1321-1975 Flexure Testing of Bent Hydraulic Tubing
• SAE ARP1321A-2000 Flexure Testing of Bent Hydraulic Tubing
• SAE J1619-2017 Single Tooth Gear Bending Fatigue Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bending Test Control

• GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
• GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
• GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
• GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
• GB/T 11185-1989 Bend test for coating(canical mandrel)
• GB/T 6742-1986 Bend test for coating(cylindrical mandrel)
• GB/T 244-2008 Metallic materials-tube.Bend test
• GB/T 244-1997 Metallic materials--Tube--Bend test
• GB/T 232-1999 Metallic materials--Bend test
• GB/T 9341-2000 Plastics--Determination of flexural properties
• GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
• GB/T 2653-2008 Bend test methods on welded joints
• GB/T 232-2010 Metallic materials.Bend test
• GB/T 8364-2003 Test method for specific thermal deflection of thermostat metals
• GB/T 12347-1996 Steel wire rope--Bending fatigue testing
• GB/T 8364-2008 Test method of thermal flexure of thermostat metals
• GB/T 12347-2008 Steel wire ropes.Bending fatigue testing
• GB/T 16419-1996 Plastics--Determination of flexural properties by use of small specimens
• GB/T 8812.1-2007 Rigid cellular plastics.Determination of flexural properties.Part 1:Basic bending test
• GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
• GB/T 7032-1986 Method of bend test for T type fillet welded joint
• GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
• GB/T 1456-1988 Test method for flexural properties of sandwich constructions
• GB/T 14230-1993 Standard of test methed for bending load capacity of gears
• GB/T 4337-1984 Metals--Rotating bar bending fatigue testing
• GB/T 6742-2007 Paints and varnishes.Bend test(cylindrical mandrel)
• GB/T 24298-2009 Standard test method for cross curvature of thermostat metals
• GB 6569-1986 Testing method for flexural strength of high performance ceramics
• GB/T 11185-2009 Paints and varnishes.Bend test(conical mandrel)
• GB/T 1456-2005 Test method for flexural properties of sandwich constructions
• GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
• GB/T 14452-1993 Metallic materials. Determination of bending mechanical properties
• GB/T 8812-1988 Test method for bending of rigid cellular plastics
• GB/T 15825.5-1995 Sheet metal formability and test methods--Bending test
• GB/T 4741-1999 Standard test method for bending strength of ceramic materials
• GB/T 2570-1995 Test method for flexural properties of resin casting body
• GB/T 2653-1989 Methods of bend and compression tests for welded joint
• GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials

Danish Standards Foundation, Bending Test Control

• DS 10310:1949 Testing of metals. Bend testing
• DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
• DS/EN ISO 7438:2005 Metallic materials - Bend test
• DS/ISO 7438:2020 Metallic materials – Bend test
• DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
• DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
• DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
• DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
• DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
• DS/EN ISO 17132:2007 Paints and varnishes - T-bend test
• DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
• DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
• DS/ISO 6860:1987 Paints and varnishes. Bend test (conical mandrel)
• DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
• DS/EN ISO 17707:2005 Footwear - Test methods for outsoles - Flex resistance
• DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
• DS/EN ISO 6860:2006 Paints and varnishes - Bend test (conical mandrel)

American National Standards Institute （ANSI), Bending Test Control

• ANSI/TIA/EIA 455-88-2001 Fiber Optic Cable Bend Test
• ANSI/TIA-455-104-A-1993 Fiber Optic Cable Cyclic Flexing Test
• ANSI/TIA/EIA 455-91-1985 Fiber Optic Cable Twist-Bend Test
• ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
• ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
• ANSI/TIA-455-104A-1993 Fiber Optic Cable Cyclic Flexing Test
• ANSI/ASTM E290:1997 Test Methods for Bend Testing of Materials for Ductility
• ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
• ANSI/ASTM D5342:1997 Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
• ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

CZ-CSN, Bending Test Control

• CSN 42 0401-1978 Bend test of metals
• CSN 42 0414-1963 Bend test on tubes
• CSN ISO 7438:1994 Metallic materials.Bend test
• CSN 05 6822-1984 Bending test of welded joints of plas-tics
• CSN 34 7010 Cast.23-1990 Bending test for flexible ribbon cables
• CSN 42 0422-1983 Reverse bend testing of wire
• CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
• CSN 02 9041-1981 Compressed asbestos flat jointing. Bend test

HU-MSZT, Bending Test Control

• MNOSZ 1423-1950
• MSZ 1422-1969
• MSZ 104/2.lap-1961

BE-NBN, Bending Test Control

• NBN 117.32-1963
• NBN I-920-1968
• NBN B 15-214-1984
• NBN B 15-238-1992
• NBN 117.57-1964
• NBN B 14-211-1984
• NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test

PK-PSQCA, Bending Test Control

• PS 244-1964 BEND TEST FOR STEEL
• PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE
• PS 1502-1981 METHOD FOR DETERMINATION OF BENDING TEST (RUBBER HOSE)

SE-SIS, Bending Test Control

• SIS SS 24 82 13-1979 Hose — Bending test
• SIS SS 22 72 09-1983 Paving products — Bending test
• SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing
• SIS 11 26 22-1969 Reverse bend testing of wire
• SIS SS-ISO 6860:1990 Paints and varnishes — Bend test (conical mandrell)
• SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
• SIS SS-ISO 1746:1990 Rubber or plastics hoses and tubing — Bending tests

ZA-SANS, Bending Test Control

• SANS 5515:2007 Flexing test on flexible cords
• SANS 7438:2003 Metallic materials - Bend test
• SANS 7438:2009 Metallic materials - Bend test
• SANS:5558 Flattening and doubling-over and double-bend tests on copper tube
• SANS 7801:2003 Metallic materials - Wire - Reverse bend test
• SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests
• SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test

International Organization for Standardization (ISO), Bending Test Control

• ISO/R 167:1960 Bend test on steel tubes
• ISO/R 85:1959 Bend test for steel
• ISO 5402:2002 | IULTCS/IUP 20 Leather — Physical and mechanical tests — Determination of flex resistance by flexometer method
• ISO 10065:1990 Steel bars for reinforcement of concrete - Bend and rebend tests
• ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
• ISO 7438:2005 Metallic materials - Bend test
• ISO 7438:2016 Metallic materials - Bend test
• ISO 7438:1985 Metallic materials; Bend test
• ISO 7438:2020 Metallic materials — Bend test
• ISO 1209:1976 Rigid cellular plastics — Bending test
• ISO 144:1973 Steel - Reverse bend testing of wire
• ISO 17132:2007 Paints and varnishes - T-bend test
• ISO/R 398:1964 Bend test for copper and copper alloys
• ISO 22288:2006 | IULTCS/IUP 39 Leather — Physical and mechanical tests — Determination of flex resistance by the vamp flex method
• ISO 1209-1:2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
• ISO 1143:1975 Metals; Rotating bar bending fatigue testing
• ISO 1209-1:2004 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
• ISO 1519:2002 Paints and varnishes - Bend test (cylindrical mandrel)
• ISO 7801:1984 Metallic materials; Wire; Reverse bend test
• ISO 1519:1973 Paints and varnishes; Bend test (cylindrical mandrel)
• ISO/CD 7801 Metallic materials — Wire — Reverse bend test
• ISO 24266:2020 Footwear - Test methods for whole shoe - Flexing durability
• ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
• ISO 6860:2006 Paints and varnishes - Bend test (conical mandrel)
• ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
• ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
• ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
• ISO 6860:1984 Paints and varnishes; Bend test (conical mandrel)

GM Europe, Bending Test Control

• GME8793-2003 Ermittlung von Pr眉fkr盲ften zur Biegeschwingpr眉fung von Kurbelwellen Determination of Test Forces for Bending Fatigue Test on Crankshafts English/German
• GME 8793-2003 Determination of Test Forces for Bending Fatigue Test on Crankshafts
• GME L-9B-3-2007

CH-SNV, Bending Test Control

• SN 053 901/1-1989 Rubber condoms — Part 1: Quality testing of whole condoms

Professional Standard - Building Materials, Bending Test Control

• JC/T 263-1993 Performance test method for cast stone products. Bending strength test
• JC/T 676-1997 Test method for flexure of glass material

German Institute for Standardization, Bending Test Control

• DIN 52186:1978-06 Testing of wood; bending test
• DIN 52186:1978 Testing of wood; bending test
• DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
• DIN 53293:1982-02 Testing of sandwiches; Bending test
• DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
• DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
• DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
• DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
• DIN 53293:1982 Testing of sandwiches; Bending test
• DIN 53453:1975 Testing of Plastics; Impact Flexural Test
• DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
• DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
• DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
• DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
• DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
• DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
• DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
• DIN EN ISO 17132:2008 Paints and varnishes - T-bend test (ISO 17132:2007); English version of DIN EN ISO 17132:2008-01
• DIN EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
• DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
• DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
• DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
• DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
• DIN 53435:2018 Testing of plastics - Bending test and impact test on dynstat test specimens
• DIN 53435:1983 Testing of plastics; bending test and impact test on dynstat test pieces
• DIN EN ISO 1519:2003 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2002); German version EN ISO 1519:2002
• DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
• DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
• DIN EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014
• DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
• DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
• DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
• DIN VDE 0472-603:1989 Testing of cables, wires and flexible cords; bending behaviour

RO-ASRO, Bending Test Control

• STAS 9416-1973 RUBBER HOSES Bending test
• STAS 5540/7-1981 Tests of butt welded joints NOTCHED-BAR BEND TEST
• STAS 5878-1977 Tests of metals ROTATING BAR BENDING FATIGUE TESTING
• STAS 12054-1982 TESTING OF METALS BEND TEST OF ON FUSION WELDED PLATINGS
• STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
• STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
• STAS 5540/3-1981 Tests of butt welded joints UNNOTCHED-BAR BEND TEST
• STAS 9892-1974 Teststs of metals reverse bend testing of copper and copper alloy WIRES
• STAS 2080-1967
• STAS 338-1982 WOOD ?mpaci bcnding testing with friction penduliim

Korean Agency for Technology and Standards (KATS), Bending Test Control

• KS B 5535-2003 Material testing machines－Bending－test machines
• KS B 5535-1982 Material testing machines－Bending－test machines
• KS D ISO 10065-2002(2007) Steel bars for reinforcement of concrete?Bend and rebend tests
• KS M 3036-2016 Testing method of flexural fatigue of rigid plastics by plane bending
• KS D ISO 10065:2002 Steel bars for reinforcement of concrete &##8211;Bend and rebend tests
• KS L 1605-2003 Test method for bending creep of fine ceramics
• KS L 1605-2013 Testing method for bending creep of fine ceramics
• KS B 0861-2001 METHOD OF BEND TEST FOR BEAD WELDING
• KS F 2208-1994 Method of Bending Test for Wood
• KS B 0804-2001(2016) Metallic materials－Bend test
• KS B 0804-2001(2021) Metallic materials－Bend test
• KS F 2208-2020 Method of bending test for wood
• KS B 0804-2001(2006) Metallic materials－Bend test
• KS F 2208-1999 Method of bending test for wood
• KS B 0861-1985 METHOD OF BEND TEST FOR BEAD WELDING
• KS B 5535-2003(2018)
• KS B 0861-1971(1995) METHOD OF BEND TEST FOR BEAD WELDING
• KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
• KS F 2263-2021 Method of bending test for building boards
• KS F 2263-1985 Method of bending test for building boards
• KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
• KS M ISO 17132:2013 Paints and varnishes ㅡ T-bend test
• KS T 0204-2016 Static bending test for corrugated paperboard
• KS F 2211-1994 Method of Impact Bending Test for Wood
• KS B 0529-2019 Method of bend test for stud welds
• KS T 0204-2022 Static bending test for corrugated paperboard
• KS F 2211-1999 Method of Impact Bending Test for Wood
• KS M 3036-2016(2021) Testing method of flexural fatigue of rigid plastics by plane bending
• KS M ISO 22288-2008(2013) Leather－Physical and mechanical tests－Determination of flex resistance by the vamp flex method
• KS B 0844-2013 Method of bend test for T type fillet welded joint
• KS M 6893-2002 Testing method for flexing endurance of light leathers and their surface finishes
• KS M 3044-1988(1998) TESTING METHOD FOR FLEXURAL CREEP OF PLASTICS
• KS B 0866-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
• KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
• KS M ISO 17132-2013(2018) Paints and varnishes ㅡ T-bend test
• KS B 0862-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
• KS F 2263-2005(2015) Method of bending test for boards of buildings
• KS M 6893-1982 Testing method for flexing endurance of light leathers and their surface finishes
• KS M 6893-1987 Testing method for flexing endurance of light leathers and their surface finishes
• KS B 0862-1985 METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
• KS B 0844-1985 Method of bend test for T type fillet welded joint
• KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests
• KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
• KS M ISO 1209-1-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test
• KS M ISO 1209-1-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test
• KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
• KS M ISO 1519:2012 Paints and varnishes－Bend test(cylindrical mandrel)
• KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
• KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
• KS F 2159-2-2017 Method of bending test for structural wood-based panels
• KS B 0836-2001 METHOD OF NOTCHED BEND TEST FOR BUTT WELDED JOINT
• KS M ISO 17707-2006(2016) Footwear－Test methods for outsoles－Flex resistance
• KS F 2159-1-2017 Method of bending test for nonstructural wood-based panels
• KS L 1605-2013(2018) Testing method for bending creep of fine ceramics
• KS B ISO 1143-2003(2018)
• KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
• KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
• KS B ISO 5173:2021 Destructive tests on welds in metallic materials — Bend tests
• KS B ISO 5173:2016 Destructive tests on welds in metallic materials－Bend tests
• KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
• KS F 2159-2-2007 Method of bending test for structural wood-based panels
• KS B ISO 1143:2003 Metals－Rotating bar bending fatigue testing
• KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
• KS M ISO 6860:2012 Paints and varnishes－Bend test(conical mandrel)
• KS T 0204-2006 Static bending test for corrugated paperboard
• KS F 2491-2007 Standard test method of the flexural beam test for porous asphalt binder
• KS F 2492-2007 Standard test method of cantabro test for porous asphalt mixtures
• KS B 0837-2001 REVERSE BEND TEST FOR WELDED BUTT JOINT
• KS L 1605-1993 Testing method for bending creep of high performance ceramics

KR-KS, Bending Test Control

• KS B 5535-2003(2023)
• KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
• KS F 2159-1-2023 Method of bending test for nonstructural wood-based panels
• KS B ISO 5173-2021 Destructive tests on welds in metallic materials — Bend tests
• KS F 2329-2023 Method for preperation of soil cement compression and flexure test specimens in the laboratory
• KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
• KS B ISO 5173-2016 Destructive tests on welds in metallic materials－Bend tests

British Standards Institution (BSI), Bending Test Control

• BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
• BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
• BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
• BS EN ISO 7438:2016 Metallic materials. Bend test
• BS EN ISO 7438:2005 Metallic materials - Bend test
• BS EN ISO 17132:2007 Paints and varnishes - T-bend test
• BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
• BS EN 2831:1993 Hydrogen embrittlement of steels - Test by slow bending
• BS EN 1533:2000 Wood and parquet flooring. Determination of bending properties. Test methods
• BS EN ISO 24266:2020 Footwear. Test methods for whole shoe. Flexing durability
• 18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
• BS EN ISO 1519:2011 Paints and varnishes. Bend test (cylindrical mandrel)
• 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
• BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
• BS EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products - Bend test
• BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
• BS EN 12814-1:2000(2003) Testing of welded joints of thermoplastics semi-finished products - Bend test
• BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
• BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
• BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
• BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests
• BS EN ISO 6860:2007 Paints and varnishes - Bend test (conical mandrel)

VN-TCVN, Bending Test Control

• TCVN 6287-1997 Steel bars for reinforcement of concrete.Bend and rebend tests
• TCVN 198-2008 Metallic materials.Bend test
• TCVN 2099-2013 Paints and varnishes.Bend test(cylindrical mandrel)
• TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
• TCVN 5401-2010 Destructive tests on welds in metallic materials.Bend tests
• TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test

TH-TISI, Bending Test Control

• TIS 2173-2012 Metallic materials.bend test
• TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

AT-ON, Bending Test Control

• ONORM M 3052-1997 Welding - Bending test for welded-on seams
• OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• ONORM M 3052-1950
• ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
• OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)

European Committee for Standardization (CEN), Bending Test Control

• EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
• EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
• EN ISO 7438:2005 Metallic materials Bend test
• EN ISO 17132:2007 Paints and varnishes - T-bend test
• EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
• EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
• EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
• EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
• EN ISO 1519:1995 Paints and Varnishes - Bend Test (Cylindrical Mandrel) (ISO 1519:1973)
• EN ISO 24266:2020 Footwear - Test methods for whole shoe - Flexing durability (ISO 24266:2020)
• EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
• EN ISO 6860:1995 Paints and Varnishes - Bend Test (Conical Mandrel) (ISO 6860: 1984)
• EN 21746:1993 Rubber or plastics hoses and tubing; bending tests (ISO 1746:1983)
• EN ISO 6860:2006 Paints and Varnishes - Bend Test (Conical Mandrel)
• EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test

RU-GOST R, Bending Test Control

• GOST 24167-1980 Brazing and soldering joint. Bend testing method
• GOST R ISO 7438-2013 Mettallic materials. Bend test
• GOST 4648-2014 Plastics. Method of static bending test
• GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
• GOST 18564-1973 Rigid cellular plastics. Static bend test
• GOST 1579-1993 Wire. Bend test method
• GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests
• GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
• GOST R 50500-1993 Paints and varnishes. Bend test (conical mandrel)
• GOST 14019-2003 Metallic materials. Bend test method

ET-QSAE, Bending Test Control

• ES G.B8.311-1973

IT-UNI, Bending Test Control

• UNI EN ISO 7438:2020 Metallic materials - Bend test
• UNI 564-1960
• UNI 6381-1968
• UNI EN ISO 24266:2021 Footwear - Test methods for whole shoe - Flexing durability

Japanese Industrial Standards Committee (JISC), Bending Test Control

• JIS Z 2248:2022 Metallic materials -- Bend test
• JIS Z 2248:2006 Metallic materials -- Bend test
• JIS Z 2113:1977 Method of bending test for wood
• JIS K 7221-1:1999 Cellular plastics, rigid -- Flexural tests -- Part 1: Bending test
• JIS Z 2204:1996 Bend test pieces for metallic materials
• JIS K 7116:1987 Testing method for flexural creep of plastics
• JIS Z 2248:1996 Method of bend test for metallic materials
• JIS Z 3134:1965 Method of bend test for T type fillet welded joint
• JIS Z 3145:1981 Method of bend test for stud welds
• JIS Z 3122:2013 Methods of bend test for butt welded joint
• JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
• JIS K 7221-1:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
• JIS A 1106:1993 Method of test for flexural strength of concrete
• JIS R 1612:2002 Testing method for bending creep of fine ceramics
• JIS Z 3122:1990 Methods of bend test for butt welded joint
• JIS Z 3135:1971 Method of soundness test for fillet welds
• JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)

未注明发布机构, Bending Test Control

• BS 1639:1964(1999) Methods for Bend testing ofmetals

TR-TSE, Bending Test Control

• TS 281-1965 BEND TESTS ON FUSION VVELDED BUTT JOINTS AND FREE BEND TEST FOR DUCTILITY OF WELDS

Taiwan Provincial Standard of the People's Republic of China, Bending Test Control

• CNS 3940-1999 Bend test pieces for metallic materials
• CNS 13976-1997 Method of test for flexural strength of dimensional stone
• CNS 8527-1982 Method of Test for Flexural Fatigue of Rigid Plastics by Plane Bending
• CNS 12690-1990 Mehtod of Test for Tent -- Testing for Bending Resistance of the Framework
• CNS 3941-1999 Method of bend test for Metallic materials
• CNS 3904-1986 Method of Bending Test for Boards of Buildings
• CNS 13254-1993 Method of Bend Test for Stud Welds
• CNS 13985-1997 Method of test for bending creep of fine ceramics
• CNS 10017-1983 Method of Test for Bending Fatigue of Vulcanized Rubber
• CNS 12673-1990 Method of Test for Free Bend of Buff Welding Joint
• CNS 12674-1990 Method of Test for Roller Bend of Buff Welding Joint
• CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
• CNS 14315-1999 Methods of test for bending fatigue of fine ceramics at room temperature
• CNS 7376-1997 Method of plane bending fatigue testing of metal plates

Standard Association of Australia （SAA）, Bending Test Control

• AS 2505.3:2004 Metallic materials - Tubular products - Bend and related tests
• AS 1580.402.1:2003(R2013)
• AS 1012.8.2:2000 Methods of testing concrete - Method of making and curing concrete - Flexure test specimens
• AS 1012.8.2:2014 Methods of testing concrete - Method of making and curing concrete - Flexure test specimens

工业和信息化部/国家能源局, Bending Test Control

• JB/T 13554-2018 Internal combustion engine crankshaft bending fatigue test method

Society of Automotive Engineers (SAE), Bending Test Control

• SAE J119-2005 Fiberboard Crease Bending Test
• SAE J119-2010 Fiberboard Crease Bending Test
• SAE J119-2019 Fiberboard Crease Bending Test
• SAE J1619-1997 Single Tooth Gear Bending Fatigue Test

GM North America, Bending Test Control

• GM GM9451P-2003 Test Procedure to Determine Warpage (Revision B)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Bending Test Control

• IPC TM-650 5.5.2.6-1998 Test Method 2.4.3 Flexural Endurance
• IPC TM-650 5.5.2.5-1998 Test Method 2.4.3.1 Flexural Fatigue and Ductility

Professional Standard - Aviation, Bending Test Control

• HB 5184-1981 Metal pipe bending test method
• HB 6140.4-1987 Test methods for formability of sheet metal - bend test
• HB 5175-1996 Metal wire repeated bending test method
• HB 5175-1981 Metal wire repeated bending test method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bending Test Control

• GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method

Professional Standard - Ferrous Metallurgy, Bending Test Control

• YB/T 5126-2003 Steel bars for reinforcement of concrete-Bend and rebend tests
• YB/T 5126-1993 Steel bars for reinforcement of concrete-Bend and rebend tests
• YB/T 5349-2006 Test methods for bending mechanical properties of metals
• YB/T 5001-1993 Test method for double-layer occlusal bending of thin plates

Lithuanian Standards Office , Bending Test Control

• LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
• LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
• LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
• LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
• LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
• LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
• LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)

AENOR, Bending Test Control

• UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
• UNE 7306:1974 PREPARATION OF STEEL TEST PIECES WITH COL DEFORMATION AGEING FOR IMPACT BENDING TEST.
• UNE-ISO 1209-1:2011 Rigid cellular plastics. Determination of flexural properties. Part 1: Basic bending test

AR-IRAM, Bending Test Control

• IRAM 2582-1962

ES-UNE, Bending Test Control

• UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
• UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
• UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)

Group Standards of the People's Republic of China, Bending Test Control

• T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
• T/QYSJLXH 003-2020 Technical specification for steel bar bending testing machine
• T/CRIA 29001-2022 Tire crown bending modal test method
• T/CMA YJ069-0201 Technical Requirements for Measurement of Steel Bar Bending Testing Machine

(U.S.) Telecommunications Industries Association , Bending Test Control

• TIA/EIA-455-88-2001 FOTP-88 Fiber Optic Cable Bend Test
• TIA-455-104-B-2016 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
• TIA-455-141-1999(2013) FOTP-141 Twist Test for Optical Fiber Ribbons
• TIA-455-141-1999 FOTP-141 Twist Test for Optical Fiber Ribbons

VE-FONDONORMA, Bending Test Control

• NORVEN 586-1971
• NORVEN 76-44-1966

American Society for Testing and Materials (ASTM), Bending Test Control

• ASTM F269-60(1996)e1 Standard Test Method for Sag of Tungsten Wire
• ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
• ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
• ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
• ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
• ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
• ASTM D1098-61 Method of Static Bending Test for Corrugated Paperboard
• ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
• ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
• ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
• ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
• ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
• ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
• ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
• ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
• ASTM E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds

NO-SN, Bending Test Control

• NS 3543-1987 Flexible sheets - Cold crack test by bending

TIA - Telecommunications Industry Association, Bending Test Control

• TIA/EIA-455-104A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
• EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

CO-ICONTEC, Bending Test Control

• ICONTEC 1-1980

PL-PKN, Bending Test Control

• PN C89077-1973 Plastics Bending test for rigid cellular plastics
• PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)
• PN E04160-25-1989 Electric cables Methods of testing Bending test for the flexible cables
• PN C89077-01-1993 Cellular plastics rigid Flexural tests Bending test

IN-BIS, Bending Test Control

• IS 9399-1979
• IS 10810 Pt.50-1984
• IS 5075-1985

GB-REG, Bending Test Control

• REG NACA-TN-3735-1956 Bending tests of ring-stiffened circular cylinders

国家市场监督管理总局、中国国家标准化管理委员会, Bending Test Control

• GB/T 244-2020 Metallic material—Tube—Bend test method
• GB/T 37781-2019 Test methods for bending strength of glass
• GB/T 1456-2021 Test method for flexural properties of sandwich constructions
• GB/T 14230-2021 Test method of tooth bending strength for gear load capacity

Canadian General Standards Board （CGSB), Bending Test Control

• CGSB 1-GP-71 METH 137.2-1978 Methodes D'Essai Des Peintures Et Pigments Essai Au Ruban Adhesif Feuils Plies

Professional Standard - Textile, Bending Test Control

• FZ/T 01054.4-1999 Test method for fabric style - Test method for bendability

Professional Standard - Chemical Industry, Bending Test Control

• HG/T 3840-2006 Plastics. Determination of flexural properties by use of small specimens

Association of German Mechanical Engineers, Bending Test Control

• DVS 2203-1 Beiblatt 3-2001
• DVS 2203-1 Beiblatt 3-2012 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the technological bending test - Bending angle/bending path

Professional Standard - Automobile, Bending Test Control

• QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

Indonesia Standards, Bending Test Control

• SNI 07-4611-1998 Reverse bend test for metallic material wires
• SNI 07-6525-2001 Methods of plane bending fatigue testing of metal plates
• SNI ISO 17707:2011 Footwear - Test methods for outsoles - Flex resistance

FI-SFS, Bending Test Control

• SFS 5426-1988 In case of interpretation disputes the Finnish text applies

Professional Standard-Ships, Bending Test Control

• CB/T 3351-2005 Methods of bend tests for shipbuilding welded joint
• CB/T 3522-1993 Test method for transverse bending of marine steel pipes
• CB/T 3522-2016 Test method for transverse bending of marine steel pipes

Professional Standard - Machinery, Bending Test Control

• JB/T 9374-2015 Pure bending fatigue testing machines.Technical specification
• JB/T 9374-1999 Specifications for the rotary bending fatigue testing machines
• JB/T 7131-2002 Standard test method for cross curvature of thermostat metals

Professional Standard - Agriculture, Bending Test Control

• GB/T 238-1984 Test method for repeated bending of metallic materials

Professional Standard - Railway, Bending Test Control

• TB/T 1354-1979 Rail bending fatigue test method

机械工业部, Bending Test Control

• JB/T 7131-1993 Hot bimetal transverse bend test method

工业和信息化部, Bending Test Control

• YB/T 4994-2022 Test method for bending properties of carbon materials

AASHTO - American Association of State Highway and Transportation Officials, Bending Test Control

• T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
• T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement

Military Standard of the People's Republic of China-General Armament Department, Bending Test Control

• GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test

ES-AENOR, Bending Test Control

• UNE 67-037-1986

IX-FAO, Bending Test Control

• CAC/GL 78-2011 Guidelines for the Control of Campylobacter and Salmonella in Chicken Meat

Liaoning Provincial Standard of the People's Republic of China, Bending Test Control

• DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine

PT-IPQ, Bending Test Control

• E 180-1965

Professional Standard - Aquaculture, Bending Test Control

• SC/T 8062-2000 Test method for overall longitudinal bending of glass fiber reinforced plastics fishing vessel

National Metrological Technical Specifications of the People's Republic of China, Bending Test Control

• JJF(石化) 025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine
• JJF(石化)025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine

Others:   Bending Test Control, Bend test sample, a bending test, Sheet bending test, Stone bending test, Sheet bending test, Alloy bending test, Wire Bending Test, Plastic bending test, Flexibility test, Rebar Bending Test, beam bending test, Rebar Bending Test, Cyclic bending test, Bending strength test, Bending test fracture, Steel plate bending test, Bend test measurement, control test, Flexural modulus of bending test.