ZH
RU
ES

dsc isothermal and non-isothermal

dsc isothermal and non-isothermal, Total:272 items.

In the international standard classification, dsc isothermal and non-isothermal involves: Plastics, Electrical accessories, Road vehicle systems, Veterinary medicine, Pipeline components and pipelines, Materials for aerospace construction, Geology. Meteorology. Hydrology, Thermodynamics and temperature measurements, Installations in buildings, Rubber and plastics products, Petroleum products in general, Protection against dangerous goods, Rubber, Iron and steel products, Aerospace fluid systems and components, Fasteners for aerospace construction, Environmental protection, Corrosion of metals, Coatings and related processes used in aerospace industry, Fuels, Rotating machinery, Protection against fire, Burners. Boilers, Testing of metals, Products of the textile industry, Measurement of volume, mass, density, viscosity, Construction materials, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Physics. Chemistry, Medical equipment, Protection of and in buildings, Products of non-ferrous metals, Aerospace electric equipment and systems, Ceramics, Solar energy engineering, Piezoelectric and dielectric devices.

Association Francaise de Normalisation, dsc isothermal and non-isothermal

NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF E51-741*NF EN 16445:2013 Ventilation for buildings - Air Diffusion - Aerodynamic testing and rating for mixed flow application : non-isothermal procedure for cold jet
NF A32-055-2:1996 Technical delivery conditions for steel castings for pressure purposes. Part 2 : steel grades for use at room temperature and elevated temperatures.
NF L22-541:2001 Aircraft bolts and nuts - Hexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC or in heat resisting steel, silver plated - Classification : 1 100 MP
NF C51-286:2004 Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise.
AC D40-007:2009 Equipment for catering - Isothermal containers - General design and construction on rules for ensuring hygiene in use
NF A49-242:1985 Steel tubes. Longitudinally pressure welded tubes D inferior or equal to 168,3 mm in non alloyed and low alloyed steels used at medium elevated temperatures. Dimensions. Technical delivery conditions.
NF C51-286*NF EN 60034-29:2008 Rotating electrical machines - Part 29 : equivalent loading and superposition techniques - Indirect testing to determine temperature rise
NF EN 60034-29:2008 Machines électriques tournantes - Partie 29 : techniques par charge équivalente et par superposition - Essais indirects pour déterminer l'échauffement
NF A03-716:1969 IRON AND STEEL. ISOTHERMAL RELAXATION TEST FOR WIRE ROD AND BARS USED AS REINFORCEMENT IN PRE- AND POST-STRESSED STRUCTURES.
NF L24-672*NF EN 2906:1994 Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF L22-588:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L24-669*NF EN 2908:1994 Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.
NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV
NF L54-147-001*NF EN 3372-001:2008 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65oC to 175oC or 200oC continuous - Part 001 : technical specification
NF X10-232:1987 Air distribution and air diffusion. Laboratory aerodynamic testing and rating of air terminal devices in a isothermal air discharge.
NF L24-519*NF EN 2883:2010 Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 315 oC
NF P75-224*NF EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance

British Standards Institution (BSI), dsc isothermal and non-isothermal

BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN 16445:2013 Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
22/30410876 DC BS ISO 12493. Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal conditions
BS A 333:1999 Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
BS ISO 12493:2023 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal condition
BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
BS ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
BS ISO 3209:2016 Aerospace. Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 C, 1 100 MPa (at ambient temperature)/315 C and 1 100 MPa (at ambient temperature)/ 425 C.
BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
BS EN 60034-29:2008 Rotating electrical machines. Equivalent loading and superposition techniques. Indirect testing to determine temperature rise
BS EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and at elevated temperature
BS EN 61986:2002 Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise
BS ISO 4215:2022 Corrosion of metals and alloys. Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
BS EN 4311:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS A 345:1999 Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
21/30411253 DC BS EN ISO 4215. Corrosion of metals and alloys. Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS EN 4312:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature) / 315 °C
BS PD CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations
PD IEC/TR 60216-7-2:2016 Electrical insulating materials. Thermal endurance properties. Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
23/30450101 DC BS EN IEC 60601-2-91. Particular requirement for basic safety and essential performance of non-thermal plasma wound treatment equipment
BS EN 2854-003:2009 Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm2 - Operating temperatures between -55 °C and 260 °C - Product standard
BS EN 2854-003:2021 Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55 °C and 260 °C. Product standard
BS EN 2882:2006 Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235 °C
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test
BS 9612 N016:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperat
BS 9612 N017:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temper

Professional Standard - Electron, dsc isothermal and non-isothermal

SJ/T 9560.26-1993 Unsealed constant temperature relay--Quality grading standard

Society of Automotive Engineers (SAE), dsc isothermal and non-isothermal

SAE J2234-2001 Equivalent Temperature桾ruck and Bus
SAE AMS3193D-2011 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193E-2014 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE J2234-2007 Equivalent Temperature Truck and Bus
SAE J2234-2012 Equivalent Temperature Truck and Bus
SAE AMS5548-1958 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal
SAE AMS5548B-1966 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
SAE AMS5548D-1967 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
SAE AMS5548F-1979 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
SAE AMS5548C-1967 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
SAE AMS5548A-1959 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal
SAE AMS5548E-1968 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N High Temperature Annealed
SAE AMS3373/2A-2001 Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure
SAE AMS3373/2-1981 COMPOUND, SILICONE RUBBER, INSULATING AND SEALING Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure

SAE - SAE International, dsc isothermal and non-isothermal

SAE J2234-1993 Equivalent Temperature@ Information Report (January 1993)
SAE AMS5548L-1998 STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N High Temperature Anneal

未注明发布机构, dsc isothermal and non-isothermal

SAE J2234-201211 Equivalent Temperature桾ruck and Bus

PL-PKN, dsc isothermal and non-isothermal

PN P22126-1991 Leathers. Determination of water vapour permeability in non-isothermal conditions

Liaoning Provincial Standard of the People's Republic of China, dsc isothermal and non-isothermal

DB21/T 3256-2020 Rapid detection method for isothermal amplification of African swine fever virus

RU-GOST R, dsc isothermal and non-isothermal

GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GOST 30679-1999 Standard platinum resistance thermometers of the first and second grades. General technical requirements
GOST IEC 60034-29-2013 Rotating electrical machines. Part 29. Equivalent loading and superposition techniques. Indirect testing to determine temperature rise
GOST R 8.1002-2021 State system for ensuring the uniformity of measurements. Standard reference data. Parahydrogen, liquid and gaseous. Density, enthalpy, entropy, isochoric, isobaric heat capacities and speed of sound at temperatures from 14 K up to 1000 K and pressures up
GOST R 8.1001-2021 State system for ensuring the uniformity of measurements. Standard reference data. Orthohydrogen, liquid and gaseous. Density, enthalpy, entropy, isochoric, isobaric heat capacities and speed of sound at temperatures from 15 K up to 1000 K and pressures u

International Organization for Standardization (ISO), dsc isothermal and non-isothermal

ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 12493:2023 Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions
ISO 6771:1987 Aerospace; Fluid systems and components; Pressure and temperature classifications
ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO 3168:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 8538:1999 Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3223:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3224:1998 Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:2016 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 3221:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12273:2010 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12272:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimen
ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 3225:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - D
ISO 3191:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 7332:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 9156:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 3222:1998 Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425

Danish Standards Foundation, dsc isothermal and non-isothermal

DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DS/EN 16445:2013 Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
DS/EN 60034-29:2008 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, dsc isothermal and non-isothermal

GB/T 19466.6-2009 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)
GB/T 21211-2007 Equivalent loading and super-position techniques.Indirect testing to determine temperature rise of roating electrical machines

German Institute for Standardization, dsc isothermal and non-isothermal

DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018
DIN EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DIN EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008); German version EN ISO 11357-6:2013
DIN EN 3007:1996 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
DIN EN 3240:2008 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3240:2007
DIN EN 16445:2013-05 Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet; German version EN 16445:2013
DIN EN 16445:2013 Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet; German version EN 16445:2013
DIN EN 60034-29:2009 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise (IEC 60034-29:2008); German version EN 60034-29:2008
DIN EN 4311:2007 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006
DIN CEN/TR 16632:2014-10*DIN SPEC 18087:2014-10 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations; German version CEN/TR 16632:2014
DIN EN 4627:2014-09 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations; German version CEN/TR 16632:2014
DIN 53529-2:1983-03 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics
DIN 21057-12:2017 Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
DIN 21057-10:2017 Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
DIN EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4130:2009
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022
DIN EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001
DIN EN 17643:2022 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
DIN EN 4073:2010 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4073:2009
DIN 53529-2:1983 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics
DIN EN 2882:2008 Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2882:2006

ES-UNE, dsc isothermal and non-isothermal

UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test

Korean Agency for Technology and Standards (KATS), dsc isothermal and non-isothermal

KS M ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS W ISO 12273-2005(2015) Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambi
KS W ISO 12272-2005(2015) Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and
KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W 0929-1998 Aerospace - Nuts, anchor, self-locking, floating, two-lug with counterbore, with MJ threads, coated or uncoated classification 1100MPa/235 degrees C, 1100MPa/315 degrees C or 1100MPa/425 degrees CDimensions
KS W ISO 3191:2008 Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315 ℃ and 1 100 MPa(at ambient temperature)/425 ℃－Dimensio
KS W ISO 3191-2008(2018) Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315
KS W ISO 7332-2009(2019) Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)
KS C IEC 61986:2006 Rotating electrical machines-Equivalent loading and super-position techniques-Indirect testing to determine temperature rise
KS C IEC 61986-2006(2011) Rotating electrical machines－Equivalent loading and super－position techniques－Indirect testing to determine temperature rise
KS C IEC 61986:2015 Rotating electrical machines－Equivalent loading and super－position techniques－Indirect testing to determine temperature rise
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS W ISO 12272:2005 Aerospace-Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications:900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12273:2005 Aerospace-Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12272:2016 Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12273:2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS C IEC 60034-29-2014(2020) Rotating electrical machines — Part 29: Equivalent loading and superposition techniques — Indirect testing to determine temperature rise
KS W ISO 7332:2009 Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)/315 ℃ and 1 100 MPa (at ambient temperature)/425 ℃－Di
KS W ISO 9156:2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur

KR-KS, dsc isothermal and non-isothermal

KS M ISO 11357-6-2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS W ISO 9156-2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur

Aerospace Industries Association/ANSI Aerospace Standards, dsc isothermal and non-isothermal

AIA/NAS NAS 1689-1964 Hose Assembly, Tetrafluoroethylene High Temperature, Medium Pressure, Flareless

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., dsc isothermal and non-isothermal

ASHRAE SA-96-1-1-1996 Airflow Characteristics of Jet Expansion for Nonisothermal Flow Conditions
ASHRAE 3633-1993 New Similitude Modeling Technique for Studies of Nonisothermal Room Ventilation Flows
ASHRAE 164.3-2015 Method of Test for Commercial and Industrial Isothermal Humidifiers
ASHRAE DA-07-044-2007 Analysis of Airflow in a Full-Scale Room with Non-Isothermal Jet Ventilation Using PTV Techniques
ASHRAE 4300-1999 Local Mean Age Measurements for Heating@ Cooling@ and Isothermal Supply Air Conditions
ASHRAE 4153-1998 A New Experimental Approach for the Evaluation of Domestic Ventilation Systems: Part 2 - Necessary Airtightness Levels@ Inner Door Conditions@ and Temperature Difference for Successful Function of Nonduct Exhaust-Only Ventilation System

Hebei Provincial Standard of the People's Republic of China, dsc isothermal and non-isothermal

DB13/T 5175-2020 Greenhouse Vegetable Planting Low Temperature and Little Sunshine Weather Grade and Forecast

RO-ASRO, dsc isothermal and non-isothermal

STAS 11290-1989 RESISTANT STEELS AT LOW AND HIGH TEMPERATURES FOR ASSEMBLING PACTS Grades and technics.:! requirements for quality
STAS 11290/C1-1985 REZISTANT STEELS AT LOW AND HIGH TEMPERATURE FOR ASSEMBLING PARTS Grades and technical requirements for quality
STAS 8184-1987 STEELS FOR TUBES USED AT ELEVATED TEMPERATURES Grades and technical requirements for quality
STAS 10382-1988 STEELS FOR TUBES FOR LOW TEMPEBATURES SERVICE Grades and technical requirements for qualily
STAS 12403-1985 LOW TEMPERATt'RES RESISTANT STEELS IN CASTINGS Grades and technical requirements for quality
STAS 2888/6-1981 Standard gauge railway cars REFRIGERATOR, ISOTHERMAL AND COOLER WAGONS Types and main parameters
STAS 2883/2-1980 Hot rolled steel STEELS FOR PLATES FOR BOI- LERS AND PRESSURE VESSELS USED AT NORMAL AND LOW TEMPERATURES Grades and technical' requirements
STAS 12404-1985 HIGH TEMPERATURE RESISTANT CARBON, LOW AND MEDIUM ALLOYED STEELS IN CASTINGS Grades and technical requirements for quality
STAS 2883/3-1988 Hot rolled steel STEELS FOR PLATES FOR BOILERS AND PRE? SURE VESSELS USED AT NORMAL AND ELEVATED TEMPEKATURES Grades and technical requi'remenU for quality
STAS 9382/3-1989 CASE-HARDENING STEELS USED FOR ASSEMBLING ELEMENTS MANUFACTURE BY COLD FLOW Grades and quality technical requirements
STAS 9382/4-1989 HEAT TREATABLE STEELS USED FOR ASSEMBLING ELEMENTS MANUFACTURE BY COLD FLOW Crudes and quality technical requirements
STAS 11523-1987 HEAT-RESISTING AND MECHANICAL RESISTING STEELS AT HIGH TEMPERATURES, WORKED BY HOT DEFORMATION Grades and general technical requirements for quality
STAS 9382/2-1989 UNTREATED STEELS USED FOR ASSEMBLING COMPONENTS MANUFACTURE BY COLD FLOW Grades and technical requirements for quali

AENOR, dsc isothermal and non-isothermal

UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
UNE-EN 16445:2014 Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
UNE-EN 60034-29:2009 Rotating electrical machines -- Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

NL-NEN, dsc isothermal and non-isothermal

NEN 3945-1982 Bitumen and tar products Determination of the Equi-Viscous Temperature (EVT)

American Society for Testing and Materials (ASTM), dsc isothermal and non-isothermal

ASTM D8363-20 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10b Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A516/A516M-05 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A662/A662M-01e1 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A774/A774M-14(2019) Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM A774/A774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-00 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-06 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-09 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A774/A774M-13 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM A988/A988M-17 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988-98 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-15 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989/A989M-15 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-15a Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A1080-15 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
ASTM A988/A988M-23 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A1080-12 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
ASTM A989/A989M-13 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A988/A988M-16 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A1080-14 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
ASTM A989/A989M-23 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM D6992-03(2009) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM A989-98 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM A989/A989M-18 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM D6992-03 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-16 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-03(2015) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM A989/A989M-05 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989/A989M-07 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM D7643-16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM A989/A989M-11 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
ASTM C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM C1360-10(2015) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1360-17 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

Group Standards of the People's Republic of China, dsc isothermal and non-isothermal

T/CMSA 0023-2021 Facility Agriculture Wind Disaster Meteorological Grade Solar Greenhouse and Plastic Greenhouse

European Committee for Standardization (CEN), dsc isothermal and non-isothermal

EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 16445:2013 Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C
EN 3721:1995 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 3722:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 4311:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations
EN 3759:1996 Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 4312:2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C
EN 3543:1997 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C
prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
EN 2413:1995 Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C
EN 3004:1997 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C - Technical specification

IN-BIS, dsc isothermal and non-isothermal

IS 1207-1978

Japanese Industrial Standards Committee (JISC), dsc isothermal and non-isothermal

JIS Q 14064-1:2010 Greenhouse gases -- Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

国家市场监督管理总局、中国国家标准化管理委员会, dsc isothermal and non-isothermal

GB/T 38430-2019 Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials

CEN - European Committee for Standardization, dsc isothermal and non-isothermal

PREN 15854-2008 Ventilation for buildings - Air Diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for a cold jet

CENELEC - European Committee for Electrotechnical Standardization, dsc isothermal and non-isothermal

EN 61986:2002 Rotating Electrical Machines - Equivalent Loading and Super-Position Techniques - Indirect Testing to Determine Temperature

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, dsc isothermal and non-isothermal

GB/T 21211-2017 Equivalent loading and superposition techniques—Indirect testing to determine temperature rise of rotating electrical machines

Professional Standard - Machinery, dsc isothermal and non-isothermal

JB/T 53155-1999 Quality classification of cryogenic globe valves and throttle valves for air separation equipment

Standard Association of Australia （SAA）, dsc isothermal and non-isothermal

AS 1530.7:2007 Methods for fire tests on building materials, components and structures - Smoke control assemblies - Ambient and medium temperature leakage test procedure

International Electrotechnical Commission (IEC), dsc isothermal and non-isothermal

IEC 61986:2002 Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise
IEC 60034-29:2008 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise
IEC 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements

AT-ON, dsc isothermal and non-isothermal

ONORM M 7330-1980 Details on pressures and temperatures of nternal or external pressure containing components; erms and definitions, pressure ratings
OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

(U.S.) Ford Automotive Standards, dsc isothermal and non-isothermal

FORD WSE-M2D399-A3-2004 SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***

American National Standards Institute （ANSI), dsc isothermal and non-isothermal

ASTM D6992-16(2023) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

Aerospace, Security and Defence Industries Association of Europe (ASD), dsc isothermal and non-isothermal

ASD-STAN PREN 4311-1996 Aerospace Series Studs, Coarse Tolerance Reduced Shank, Medium Length Threads, in Heat and Corrosion Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius (Edition P 1)
ASD-STAN PREN 4312-1999 Aerospace Series Studs, Coarse Tolerance Reduced Shank, Medium Length Thread, in Heat and Corrosion Resisting Steel, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C (Edition P 1)

Lithuanian Standards Office , dsc isothermal and non-isothermal

LST EN 60034-29-2008 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise (IEC 60034-29:2008)

Professional Standard - Aerospace, dsc isothermal and non-isothermal

QJ 1754-1989 Specifications for ordinary and slotted nuts with MJ threaded fasteners with a maximum operating temperature less than or equal to 425°C
QJ 1751-1989 Test method for plain and slotted nuts with MJ threaded fasteners with a maximum operating temperature less than or equal to 425°C

European Committee for Electrotechnical Standardization（CENELEC）, dsc isothermal and non-isothermal

EN 60034-29:2008 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

European Association of Aerospace Industries, dsc isothermal and non-isothermal

AECMA PREN 3907-1994 Aerospace Series Bolts, Double Hexagon Head, Normal Shank, Long Thread, in Titanium Alloy TI-P63, MoS2 Coated Classification: 1 100 MPa (at Ambient Temperature)/350 Degrees C Edition P 1
AECMA PREN 2862-1993 Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, in Alloy Steel, Cadmium Plated, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C Edition P 1; Corrigendum 05/10/1993

Professional Standard - Commodity Inspection, dsc isothermal and non-isothermal

SN/T 3767.1-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 1:General requirements and definitions