ZH
RU
ES

UV Standard Curve for Naphthalene

UV Standard Curve for Naphthalene, Total:221 items.

In the international standard classification, UV Standard Curve for Naphthalene involves: Fuels, Protective equipment, Analytical chemistry, Solar energy engineering, Plastics, Paints and varnishes, Surface treatment and coating, Rubber, Petroleum products in general, Optics and optical measurements, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Environmental testing, Air quality, Inorganic chemicals, Non-destructive testing, Optoelectronics. Laser equipment, Adhesives, Lubricants, industrial oils and related products, Radiation measurements, Water quality, Protection against fire, Products of the chemical industry, Microbiology, Construction materials, Road engineering, Test conditions and procedures in general, Road vehicle systems, Glass, Aerospace electric equipment and systems, Natural gas, Kitchen equipment, Packaging materials and accessories.

American Society for Testing and Materials (ASTM), UV Standard Curve for Naphthalene

ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D6603-00 Standard Guide for Labeling of UV-Protective Textiles
ASTM D6603-07 Standard Guide for Labeling of UV-Protective Textiles
ASTM D6603-10 Standard Guide for Labeling of UV-Protective Textiles
ASTM D6603-12 Standard Specification for Labeling of UV-Protective Textiles
ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM E3006-20 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM E3006-15 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics
ASTM D4329-13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
ASTM D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D3732-82(2001) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM E169-63(1977) Standard Recommended Practices for General Techniques Of Ultraviolet Quantitative Analysis
ASTM D3732-82(1996)e1 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM D3732-82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM E169-04 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D5208-14(2022) Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D5894-96 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D5894-16 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D5894-21 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D5894-05 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D1148-13(2018) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM E169-63(1981)e1 Standard Recommended Practice for General Techniques of Ultraviolet Quantitative Analysis
ASTM D2269-99e1 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D2269-99(2005) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D2269-10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D2269-99 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM G224-23 Standard Practice for Operating UVC Lamp Apparatus for Exposure of Materials
ASTM D2269-10(2015) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D3732-23 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM D1148-13 Standard Test Method for Rubber Deteriorationmdash;Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM E169-99 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM E169-04(2014) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D6544-00 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D4144-94(2005) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D6544-00(2007) Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM E169-16 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D6544-21 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
ASTM D5208-14 Standard Practice for Fluorescent Ultraviolet 40;UV41; Exposure of Photodegradable Plastics
ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D4587-05 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4587-23 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D1148-95 Standard Test Method for Rubber Deterioration8212;Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
ASTM G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G154-12 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM F1349-08(2019) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM D1148-07a Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM G177-03 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM G177-03e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM G177-03(2008)e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37x00B0; Tilted Surface
ASTM F1349-98(2003) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM F1349-98 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM D1148-07 Standard Test Method for Rubber Deterioration8212;Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F1349-08(2014) Standard Test Method for Nonvolatile Ultraviolet 40;UV41; Absorbing Extractables from Microwave Susceptors
ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM G222-21 Standard Practice for Estimation of UV Irradiance Received by Field-Exposed Products as a Function of Location
ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D4355-99 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
ASTM D1768-89(2009) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
ASTM D1768-89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D5894-10 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM E3135-18 Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil
ASTM E3022-15 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D458-85(1998) Standard practice for testing paints and related coatings and materials using fluorescent ultraviolet exposure devices
ASTM D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D7551-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
ASTM D7620-10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D6317-98(2004) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D6317-98 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM F1500-98(2003) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1500-98 Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1500-98(2008) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM F1500-98(2014) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D5453-08b Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5453-19 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5453-08a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5453-08 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5453-09 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5453-12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

(U.S.) Ford Automotive Standards, UV Standard Curve for Naphthalene

FORD SK-M2G9543-A-2002 ADHESION PROMOTER, POLYURETHANE, UV RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D371-A-2006 POLYPROPYLENE MOLDING COMPOUND ULTRAVIOLET STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M99J356-A-2006 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M5B280-C4-2007 PRIMER, GLASS, SILANE, ONE STEP INCREASED UV STABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (SHOWN ON WSB-M5B280-C)
FORD WSS-M4D982-A-2006 POLYPROPYLENE (PP), 40% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***
FORD ESB-M80J2-A-2005 TOPCOAT, CLEAR, ABRASION RESISTANT, UV CURABLE, TRANSPARENT PLASTIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D570-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), EXTRUSION GRADE, EXTERIOR, UV STABILIZED***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESB-M4D570-A1; Use WSS-M2D382-B1)
FORD WSS-M4D713-A8-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5% WOLLASTONITE FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SK-M2G9542-A-2003 ADHESIVE, PUR, DIRECT GLAZING, ONE COMPONENT, UV-RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3D187-A2-2005 UNSATURATED POLYESTER (UP), 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND U.V. STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M3D187-A1)
FORD ESF-M99J356-A2-2006 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL, HIGHER VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M99J356-A
FORD ESF-M99J356-A3-2006 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL, RED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M99J356-A
FORD ESB-M80J4-A-2005 CLEAR TOPCOAT, UV CURABLE, ABRASION RESISTANT, TRANSPARENT ACRYLIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M21P25-B1-2006 CORROSION PROTECTIVE COATING, ZINC NICKEL ALLOY, CHROMIUM-FREE PASSIVATE, U.V. RESISTANT BLACK SEALER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3D187-A1-2005 UNSATURATED POLYESTER (UP), 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND U.V. STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D570-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) ESB-M4D570-A1 INJECTION MOLDING GRADE - EXTERIOR - UV STABILIZED***TO BE USED WITH FOED WSS-M99P1111-A*** (Use WSS-M4D952-A2)
FORD WSS-M4D994-A-2004 POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D995-A-2005 THERMOPLASTIC POLYOLEFIN (TEO) MOLDING COMPOUND, COLOR PIGMENTED, UV STABILIZED, FOR HIGH GLOSS (CLASS "B") MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D871-A5-2006 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A***
FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, UV STABILIZED, MOLD-IN-COLOR, PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D713-A5-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D713-A6 AND WSS-M4D713-A8)
FORD WSB-M4D638-A-2006 POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-B)
FORD WSS-M2G316-B4-2008 ADHESIVE, MOISTURE CURING URETHANE, ONE COMPONENT, PRIMERLESS CLEARCOAT, INCREASED UV-STABILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***
FORD ESB-M4D404-A-2009 THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***

British Standards Institution (BSI), UV Standard Curve for Naphthalene

BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS EN 2266-007:2005 Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
BS EN 15434:2006 Glass in building - Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS EN 15434:2006+A1:2010 Glass in building. Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

European Committee for Standardization (CEN), UV Standard Curve for Naphthalene

EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

CEN - European Committee for Standardization, UV Standard Curve for Naphthalene

EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

Association Francaise de Normalisation, UV Standard Curve for Naphthalene

NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
NF P78-702*NF EN 15434+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
NF P78-702/IN1*NF EN 15434/IN1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

Korean Agency for Technology and Standards (KATS), UV Standard Curve for Naphthalene

KS I ISO 21258:2012 Stationary source emissions-Determination of the mass concentration of dinitrogen monoxide(N2O)-Reference method:Non-dispersive infrared method

German Institute for Standardization, UV Standard Curve for Naphthalene

DIN EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012

Society of Automotive Engineers (SAE), UV Standard Curve for Naphthalene

SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996
SAE J2297-2011 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
SAE J2297-2013 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
SAE J2299-1996 Ultraviolet Leak Detection: Performance Requirements for Fluorescent Refrigerant Leak Detection Dye Injection Equipment for Aftermarket Service of Mobile Air- Conditioning Systems, Standard September 1996
SAE J2299-2012 Ultraviolet Leak Detection: Performance Requirements for fluorescent Refrigerant Leak Detection Dye Injection Equipment for aftermarket Service of Mobile Air-Conditioning Systems

Danish Standards Foundation, UV Standard Curve for Naphthalene

DS/EN 15434+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

Lithuanian Standards Office , UV Standard Curve for Naphthalene

LST EN 15434-2006+A1-2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

AENOR, UV Standard Curve for Naphthalene

UNE-EN 15434:2007+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

European Association of Aerospace Industries, UV Standard Curve for Naphthalene

AECMA PREN 2712-007-1991 Aerospace Series Single and Multicore Electrical Cables Screened (Spiral) and Jacketed for General Use Operating Temperatures Between -55 and +150 Degrees Celsius UV Laser Printable Product Standard