ZH
RU
ES

How to measure the magnetism of metals

How to measure the magnetism of metals, Total:473 items.

In the international standard classification, How to measure the magnetism of metals involves: Iron and steel products, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Magnetic materials, Linear and angular measurements, Conducting materials, Surface treatment and coating, Tea. Coffee. Cocoa, Non-ferrous metals, Sugar. Sugar products. Starch, Animal feeding stuffs, Biology. Botany. Zoology, Food products in general, Welding, brazing and soldering, Electromagnetic compatibility (EMC), Components and accessories for telecommunications equipment, Air quality, Corrosion of metals, Powder metallurgy, Insulating fluids, Textile fibres, Metalliferous minerals, Non-destructive testing, Galvanic cells and batteries, Organic chemicals, Cereals, pulses and derived products, Chocolate, Machine tools, Ferroalloys, Ferrous metals, Water quality, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Analytical chemistry, Metrology and measurement in general, Mechanical testing, Protective equipment, Medical equipment, Farming and forestry, Fibre optic communications, Nuclear energy engineering, Paints and varnishes, Thermodynamics and temperature measurements, Rubber, Products of the textile industry.


Korean Agency for Technology and Standards (KATS), How to measure the magnetism of metals

  • KS D 0070-2002(2022) Method of test for magnetic properties of amorphous metals using single sheet specimen
  • KS D 0070-2002(2017) Method of test for magnetic properties of amorphous metals using single sheet specimen
  • KS C IEC 60404-6:2002 Magnetic materials-Part 6:Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
  • KS C 2117-1996 Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
  • KS C 2117-1996(2021) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
  • KS D ISO 9225:2003 Corrosion of metals and alloys－Corrosivity of atmospheres－Measurement of pollution
  • KS D ISO 2360-2002(2017) Non-conductive coatings on non-magnetic basis metals－Measurement of coating thickness－Amplitude-sensitive eddy current method
  • KS D ISO 2360-2002(2022) Non-conductive coatings on non-magnetic basis metals－Measurement of coating thickness－Amplitude-sensitive eddy current method
  • KS C IEC 60404-14:2022 Magnetic materials — Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • KS C IEC 60404-6-2015(2020) Magnetic materials－Part 6：Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
  • KS D 8524-2004 Metallic coatings-Review of methods of measurement of ductility
  • KS D ISO 8401:2004 Metallic coatings-Review of methods of measurement of ductility
  • KS D ISO 8401:2015 Metallic coatings－Review of methods of measurement of ductility
  • KS E ISO 12743-2008(2018) Copper, lead, zinc and nickel concentrates－Sampling procedures for determination of metal and moisture content
  • KS D ISO 9226:2003 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • KS D ISO 9226:2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content
  • KS D ISO 7625:2010 Sintered metal materials, excluding hardmetals-Preparation of samples for chemical analysis for determination of carbon content
  • KS D ISO 7625:2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
  • KS D ISO 7625:2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
  • KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
  • KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
  • KS D ISO 9225:2018 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
  • KS D 0290-2018 Soil resistivity measurement procedure for corrosivity estimation of buried metal structure
  • KS M ISO 3856-3:2007 Paints and varnishes－Determination of “soluble” metal content－Part 3：Determination of barium content－Flame atomic emission spectrometric method
  • KS M ISO 3856-3-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 3：Determination of barium content－Flame atomic emission spectrometric method
  • KS M ISO 3856-3:2022 Paints and varnishes — Determination of “soluble” metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method
  • KS B ISO 14372:2019 Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen

Association Francaise de Normalisation, How to measure the magnetism of metals

  • NF EN ISO 2178:2016 Revêtements métalliques non magnétiques sur métal de base magnétique - Mesurage de l'épaisseur du revêtement - Méthode magnétique
  • NF EN ISO 2361:1995 Revêtements électrolytiques de nickel sur métal de base magnétique et non magnétique - Mesurage de l'épaisseur - Méthode magnétique.
  • NF C28-906:2004 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens.
  • NF A91-321:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.
  • NF EN ISO 21968:2019 Revêtements métalliques non magnétiques sur des matériaux de base métalliques et non métalliques - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations de phase
  • NF A91-321*NF EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
  • NF C28-906/A1:2021 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • NF C28-906*NF EN IEC 60404-6:2018 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • NF EN IEC 60404-6:2018 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
  • NF EN IEC 60404-6/A1:2021 Matériaux magnétiques - Partie 6 : méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
  • FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
  • NF A91-113:1995 Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.
  • NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • XP CEN/TS 17308:2019 Pneus usagés non réutilisables (PUNR) - Fils métalliques - Détermination de la teneur en matériaux non métalliques
  • NF A91-107*NF EN ISO 8401:2017 Metallic coatings - Review of methods of measurement of ductility
  • NF C28-917*NF EN 60404-14:2003 Magnetic materials - Part 14 : methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method.
  • NF G08-019-2*NF EN 16711-2:2015 Textiles - Determination of metal content - Part 2 : determination of metals extracted by acidic artificial perspiration solution
  • NF EN 60404-14:2003 Matériaux magnétiques - Partie 14 : méthode de mesure du moment magnétique coulombien d'une éprouvette de matériau ferromagnétique par la méthode du retrait ou la méthode par rotation
  • NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique
  • NF A91-113*NF EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
  • NF A05-213*NF EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
  • NF EN 16711-2:2015 Textiles - Détermination de la teneur en métaux - Partie 2 : dosage des métaux extraits au moyen d'une solution de sueur artificielle acide
  • NF A89-575:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.
  • NF A95-313:1993 Impermeable sintered metal materials and hardmetals. Determination of density.
  • NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
  • NF EN ISO 2738:2000 Matériaux métalliques frittés, à l'exclusion des métaux durs - Matériaux métalliques frittés perméables - Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte
  • NF G62-604*NF EN ISO 22775:2005 Footwear - Test methods for accessories : metallic accessories - Corrosion resistance
  • NF EN IEC 60404-16:2018 Matériaux magnétiques - Partie 16 : méthodes de mesure des propriétés magnétiques des bandes en alliage amorphe à base de fer à l'aide de l'essai sur tôle unique
  • NF A81-305:1975 COVERED ELECTRODES FOR MANUAL ARC WELDING PREPARATION OF AN ALL WELD METAL SAMPLE FOR MEASURING DIFFUSIBLE HYDROGEN.
  • NF EN IEC 62153-4-7:2021 Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-7 : compatibilité électromagnétique (CEM) - Méthode d'essai pour mesurer l'impédance de transfert, ZT, et l'affaiblissement d'écrantage, aS, ou l'affaiblisse...
  • NF EN IEC 62153-4-16:2021 Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-16 : compatibilité électromagnétique (CEM) - Extension de la plage de fréquences à des fréquences supérieures pour l'impédance de transfert et à des fréquenc...
  • NF EN IEC 62153-4-15:2021 Méthodes d'essais des câbles métalliques et autres composants passifs - Partie 4-15 : compatibilité électromagnétique (CEM) - Méthode d'essai pour le mesurage de l'impédance de transfert et de l'affaiblissement d'écran - ou de l'affaibli...
  • NF ISO 23598:2021 Assemblage mécanique de tôles - Essais destructifs des assemblages - Dimensions des échantillons et procédure pour l'essai de pelage mécanisé des assemblages simples
  • NF C93-903-25:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-25 : examinations and measurements. Concentricity of the ferrules and ferrules with fibre installed.
  • X31-150:1984 Soils, sediments, fertilizers and soil conditioners, growthmedium. Preparation of test sample for determination of metallic trace elements.
  • NF A05-307-3*NF EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3 : measurement of environmental parameters affecting indoor corrosivity
  • NF V18-247*NF EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • NF C90-133-4-15*NF EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods - Part 4-15 : electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
  • NF C90-133-4-7:2006 Metallic communication cables test methods - Part 4-7 : electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method.

TR-TSE, How to measure the magnetism of metals

  • TS 2311-1976 NON—MAGNETIC METALLIC AND V?TREOUS OR PORCELAIN ENAMEL COATINGS ON MAGNETIC BASI? METALS—MEASUREMENT OF COATING THICKNESS—MAGNETIC METHOD
  • TS 2674-1977 Non - Conductive Coatings On Non-Magnetic Basis Metals-Measurement Of Coating Thickness - Eddy Current Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure the magnetism of metals

  • GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • GB/T 31554-2015 Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method
  • GB/T 3658-2008 Methods of measurement of a.c.magnetic properties of magnetically soft materials
  • GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current
  • GB/T 19292.3-2003 Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
  • GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
  • GB/T 19292.4-2003 Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • GB/T 17418.6-2010 Methods for analysis of noble metals in geochemical samples.Part 6:Determination of platinum,palladium and gold content.Preconcentration by fire assay-emission spectrometry
  • GB/T 19292.4-2018 Corrosion of metals and alloys.Corrosivity of atmospheres.Part 4:Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • GB/T 38516-2020 Permeable sintered metal materials—Determination of average pore size of medium flow
  • GB/T 17418.2-2010 Methods for analysis of noble metals in geochemical samples.Part 2:Determination of platinum and rhodium content.Preconcentration by thiourea-catalytic polarographic method
  • GB/T 17418.5-2010 Methods for analysis of noble metals in geochemical samples.Part 5:Determination of ruthenium and osmium content.Separationby distillation-catalytic spectrophometric method
  • GB 9758.3-1988 Paints and varnishes - Determination of "soluble" metal content - Part 3: Determination of barium content by flame atomic emission spectrometry
  • GB/T 9758.3-1988 Paints and varnishes--Determination of "soluble" metal content--Part 3:Determination of barium content--Flame atomic emission spectrometric method
  • GB/T 17418.4-2010 Methods for analysis of noble metals in geochemical samples.Part 4:Deternination of iridium content.Preconcentration by thiourea-catalytic spectrphotometric method
  • GB/T 17418.7-2010 Methods for analysis of noble metals in geochemical samples.Part 7:Determination of platinum group elements.By nickel sulfide fire assay-inductively coupled plasma mass spectrometry

SE-SIS, How to measure the magnetism of metals

  • SIS SMS 2971-1974 Non-magnetic coatings on magnetic basis metals. Measurement of coating thickness. Magnetic method
  • SIS SS 02 81 94-1988 Sampling of natural waters for determination of trace meta/s
  • SIS SS-ISO 2360:1983 Non-conductive coatings on non mag- netic basis metals - Measurement of coating thickness - Eddy current method
  • SIS 11 73 10-1974 Permeable sintered metal materials. Determination of oil content
  • SIS SS 18 41 60-1992 Paints and varnishes — Determination of thickness of a dry film on a metal substrate — Magnetic flux and eddy current methods

American Society for Testing and Materials (ASTM), How to measure the magnetism of metals

  • ASTM B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B499-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B49-15 Standard Specification for Copper Rod for Electrical Purposes
  • ASTM B49-08 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
  • ASTM B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
  • ASTM B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B499-09(2014) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM D7091-22 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D7091-20 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D7091-21 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D7091-13 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
  • ASTM A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)
  • ASTM D7091-12 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D7091-05 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A927/A927M-18 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • ASTM F1622-95(2000) Test Method for Measuring the Torsional Properties of Metallic Bone Screws (Withdrawn 2001)
  • ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM D4309-96 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
  • ASTM D4309-02 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
  • ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM F1978-00(2007)e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM F1978-17 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM F1978-18 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM E1282-11 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
  • ASTM F1978-12 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM E2694-21 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
  • ASTM E2694-16 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
  • ASTM E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
  • ASTM E2985/E2985M-14 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
  • ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
  • ASTM F1153-92(1997) Standard Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements
  • ASTM E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
  • ASTM E2977-14 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance 40;FT-NMR41; Spectrometers for Liquid Samples
  • ASTM E601-07e1 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-07 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-81(1997) Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air
  • ASTM E601-20 Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
  • ASTM E601-15 Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air

British Standards Institution (BSI), How to measure the magnetism of metals

  • BS EN IEC 60404-6:2018+A1:2021 Magnetic materials - Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • BS EN 60404-6:2003 Magnetic materials. Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
  • BS EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
  • BS EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
  • BS 6200-3.12.5:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of copper - Permanent magnet alloys: volumetric method
  • 20/30403973 DC BS EN 60404-6 AMD1. Magnetic materials. Part 6 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • PD IEC TS 62153-4-1:2014+A1:2020 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Introduction to electromagnetic screening measurements
  • BS EN 60404-14:2002 Magnetic materials. Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN 16711-2:2015 Textiles. Determination of metal content. Determination of metals extracted by acidic artificial perspiration solution
  • BS EN ISO 4022:2018 Tracked Changes. Permeable sintered metal materials. Determination of fluid permeability
  • BS ISO 12743:2018 Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
  • BS 5711-15:1979 Methods of sampling and test for glycerol - Determination of heavy metals content
  • BS ISO 12743:2007 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
  • BS EN ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
  • BS EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
  • BS 6200 SubSec.3.12.5:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Permanent magnet alloys: volumetric method
  • BS 6200 SubSec.3.1.6:1991 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Permanent magnet alloys: volumetric method
  • BS EN ISO 9226:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • PD IEC/TR 62581:2010 Electrical steel. Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens
  • BS 6200-3.1.6:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Permanent magnet alloys: volumetric method
  • BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
  • BS 6200-3.37.1:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of zirconium - Steel: gravimetric method
  • BS 6920-2.1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.1: Samples for testing
  • BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
  • 19/30394894 DC BS ISO 12743 AMD1. Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
  • BS ISO 12743:2021 Tracked Changes. Copper, lead, zinc and nickel concentrates. sampling procedures for determination of metal and moisture content
  • BS EN ISO 8401:2017 Tracked Changes. Metallic coatings. Review of methods of measurement of ductility
  • BS EN ISO 9225:2012 Corrosion of metals and Alloys. Corrosivity of Atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres
  • BS 6200-3.12.4:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of copper - Cast iron: volumetric method
  • BS 6200-3.16.1:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Carbon steels and low alloy steels: gravimetric method
  • BS 6200-3.32.4:1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of titanium. Ferrotitanium: volumetric method
  • BS 6200 SubSec.3.31.2:1992 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin. Ferrotungsten and tungsten metal: volumetric method
  • 18/30358882 DC BS ISO 24497-2. Non-destructive testing. Metal magnetic memory. Part 2. Inspection of welded joints
  • BS EN ISO 11844-3:2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivity
  • BS 6200-3.12.1:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of copper - Steel and cast iron: volumetric method
  • BS 6200-3.16.3:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Steel: spectrophotometric method for trace amounts
  • BS EN 13144:2003 Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
  • BS EN 348:1992 Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal
  • BS CWA 15261-3:2005 Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in creep testing
  • BS CWA 15261-2:2005 Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in tensile testing
  • 20/30420690 DC BS EN ISO 9016. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
  • BS 6200-3.22.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method (for trace amounts)
  • BS IEC 62153-4-10:2015+A1:2020 Metallic communication cable test methods - Electromagnetic compatibility (EMC). Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets. Double coaxial test method
  • BS EN ISO 11844-3:2020 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivity
  • BS IEC 62153-4-9:2018+A1:2020 Metallic communication cable test methods - Electromagnetic compatibility (EMC). Coupling attenuation of screened balanced cables, triaxial method
  • BS EN ISO 9016:2022 Tracked Changes. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
  • BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
  • BS EN ISO 4499-3:2016 Hardmetals. Metallographic determination of microstructure. Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
  • BS ISO 22680:2020 Metallic and other inorganic coatings. Measurement of the linear thermal expansion coefficient of thermal barrier coatings
  • BS 6200-3.26.1:1995 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Steel and iron: gravimetric method
  • BS EN 62153-4-7:2006 Metallic communication cables test methods - Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening, or the coupling attenuation - Tube in tube method
  • BS ISO 21164:2018 Metallic and other inorganic coatings. DC magnetron sputtered silver coatings for engineering purposes. Measurement of coating adhesion
  • BS 6200 SubSec.3.1.1:1991 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Steel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method
  • BS CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in low-cycle fatigue testing
  • BS ISO 17918:2015 Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
  • BS EN 16813:2016 Thermal spraying. Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
  • BS 6200-3.11.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts
  • BS 6200 SubSec.3.10.5:1992 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Ferrochromium: volumetric method
  • BS 6200 SubSec.3.19.2:1992 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of molybdenum. Ferromolybdenum: gravimetric method
  • BS 6200-3.1.1:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method
  • BS 6200 SubSec.3.33.3:1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungsten. Ferrotungsten: gravimetric method
  • BS 6200 SubSec.3.32.4:1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of titanium. Ferrotitanium: volumetric method
  • BS 6200 SubSec.3.5.2:1991 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron. Ferroboron: volumetric method
  • BS EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis. Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • 19/30364985 DC BS ISO 22680. Metallic and other inorganic coatings. Measurement of linear thermal expansion coefficient of thermal barrier coatings
  • PD CEN ISO/ASTM TR 52952:2023 Additive manufacturing of metals. Feedstock materials. Correlating of rotating drum measurement with powder spreadability in PBF-LB machines
  • 12/30260381 DC BS EN 62153-4-4. Metallic communication cable test methods. Electromagnetic compatibility (EMC). Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz. (Proposed horizontal standard)
  • BS 6200 SubSec.3.10.4:1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Ferrochromium and ferrosilicochromium: potentiometric method

International Electrotechnical Commission (IEC), How to measure the magnetism of metals

  • IEC 60404-6:2018+AMD1:2021 CSV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
  • IEC 60404-6:2018 RLV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
  • IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • IEC 60404-6:2003/COR1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1
  • IEC 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
  • IEC 60404-6:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • IEC 60404-6:2018/AMD1:2021 Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use
  • IEC TS 62153-4-1:2014 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibiliy (EMC) - Introduction to electromagnetic screening measurements
  • IEC TS 62153-4-1:2014/AMD1:2020 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
  • IEC TS 62153-4-1:2014+AMD1:2020 CSV Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
  • IEC 60404-14:2002 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • IEC TR 62153-4-1:2010 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
  • IEC TR 62153-4-1:2007 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
  • IEC TR 62581:2010 Electrical steel - Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens
  • IEC 62153-4-4:2015 Metallic communication cable test methods - Part 4-4: Electro Magnetic Compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
  • IEC 62153-4-9:2008 Metallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened ballanced cables, triaxial method
  • IEC 62153-4-10:2009 Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial method
  • IEC 62153-4-4:2006 IEC 62153-4-4: Metallic communication cable test methods - Part 4-4: Electromagnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation a<(Index)s> up to and above 3 GHz
  • IEC 62153-4-7:2006 Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method

European Committee for Standardization (CEN), How to measure the magnetism of metals

  • EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
  • EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method
  • EN 23326:1993 Hardmetals - Determination of (the Magnetization) Coercivity (ISO 3326: 1975)
  • EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
  • EN ISO 8401:2017 Metallic coatings - Review of methods of measurement of ductility
  • EN 16711-2:2015 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
  • EN ISO 2360:1995 Non-Conductive Coatings on Non-Magnetic Basis Metals - Measurement of Coating Thickness - Eddy Current Method (ISO 2360 : 1982)
  • EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
  • EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
  • EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method ISO 2360:2003
  • EN 23312:1993 Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987)
  • EN ISO 17655:2003 Destructive tests on welds in metallic materials Method for taking samples for delta ferrite measurement ISO 17655:2003
  • EN ISO 8401:1994 Metallic Coatings - Review of Methods of Measurement of Ductility (ISO 8401 : 1986)
  • EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
  • EN 13144:2003 Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
  • EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
  • EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
  • EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)

International Organization for Standardization (ISO), How to measure the magnetism of metals

  • ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
  • ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
  • ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
  • ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
  • ISO 9225:1992 Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution
  • ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
  • ISO 8401:1986 Metallic coatings; Review of methods of measurement of ductility
  • ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
  • ISO 12743:2006 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
  • ISO 12743:2018 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
  • ISO 12743:2021 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
  • ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9226:1992 Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
  • ISO 21164:2018 Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion
  • ISO 2738:1987 Permeable sintered metal materials; Determination of density, oil content, and open porosity
  • ISO/ASTM TR 52952:2023 Additive manufacturing of metals — Feedstock materials — Correlating of rotating drum measurement with powder spreadability in PBF-LB machines
  • ISO 17918:2015 Corrosion of metals and alloys - Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
  • ISO 11844-3:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
  • ISO 3856-3:1980 Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectroscopic method
  • ISO 3856-3:1984 Paints and varnishes; Determination of "soluble" metal content; Part 3 : Determination of barium content; Flame atomic emission spectrometric method
  • ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals

German Institute for Standardization, How to measure the magnetism of metals

  • DIN EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
  • DIN EN ISO 21968:2020-02 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019); German version EN ISO 21968:2019
  • DIN EN 60404-6:2004 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
  • DIN EN 60404-6 Berichtigung 1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
  • DIN EN 60404-14:2003 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002
  • DIN EN 16711-2:2016 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
  • DIN EN 60404-14:2003-02 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002
  • DIN ISO 23519:2015 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
  • DIN EN ISO 9226:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012); German version EN ISO 9226:2012
  • DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
  • DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
  • DIN EN ISO 7625:2013-03 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012); German version EN ISO 7625:2012
  • DIN EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
  • DIN IEC/TR 62153-4-1:2013 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements (IEC 46/438/CD:2012)
  • DIN EN ISO 9225:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012); German version EN ISO 9225:2012
  • DIN EN 16711-2:2016-02 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution; German version EN 16711-2:2015
  • DIN EN 13144:2003 Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test; German version EN 13144:2003
  • DIN EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012); German version EN ISO 9226:2012
  • DIN EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012); German version EN ISO 7625:2012
  • DIN EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2006); German version EN ISO 7625:2010
  • DIN EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006); German version EN ISO 11844-3:2008
  • DIN EN ISO 11844-3:2020-06 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020); German version EN ISO 11844-3:2020
  • DIN ISO 3856-1:1985 Paints and varnishes; determination of "soluble" metal content; determination of lead content; identical with ISO 3856/1, edition 1984
  • DIN ISO 3856-3:1986 Paints and varnishes; determination of "soluble" metal content; determination of barium content; identical with ISO 3856/3, edition 1984
  • DIN ISO 3856-4:1986 Paints and varnishes; determination of "soluble" metal content; determination of cadmium content; identical with ISO 3856/4, edition 1984
  • DIN EN ISO 7625:2011 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO/DIS 7625:2011); German version prEN ISO 7625:2011
  • DIN EN 17053:2018 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • DIN EN 17053:2018-03 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method); German version EN 17053:2018
  • DIN EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012); German version EN ISO 9225:2012

ES-UNE, How to measure the magnetism of metals

  • UNE-EN ISO 21968:2020 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
  • UNE-EN IEC 60404-6:2018/A1:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
  • UNE-EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
  • UNE-EN IEC 60404-6:2018/AC:2018-12 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
  • UNE-EN 16711-2:2016 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
  • UNE-EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) (Endorsed by AENOR in March of 2012.)
  • UNE-EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) (Endorsed by AENOR in March of 2012.)
  • UNE-EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
  • UNE-EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • UNE-EN IEC 62153-4-15:2022 Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell

Professional Standard - Ferrous Metallurgy, How to measure the magnetism of metals

  • YB/T 4188-2015 Test method for the content of magnetic metallic iron in steel slag
  • YB/T 4188-2009 Determination method of magnetic metal iron content in steel slag
  • YB/T 4392.2-2014 Sulphat titanium slag.Determination of metallic iron content.Dichromate titrimetric method

Professional Standard - Agriculture, How to measure the magnetism of metals

European Committee for Electrotechnical Standardization（CENELEC）, How to measure the magnetism of metals

  • EN 60404-6:2003 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
  • EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • EN 60404-14:2002 Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
  • EN 62153-4-7:2016 Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Tri

BE-NBN, How to measure the magnetism of metals

Danish Standards Foundation, How to measure the magnetism of metals

  • DS/EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
  • DS/EN 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
  • DS/EN IEC 60404-6:2021 Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
  • DS/EN ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
  • DS/ISO 2360:1983 Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method
  • DS/EN ISO 2360:1995 Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method
  • DS/EN 60404-14:2002 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of ferromagnetic material specimen by the withdrawal or rotation method
  • DS/EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • DS/EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • DS/EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • DS/EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
  • DS/EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity
  • DS/ISO 3856/3:1982 Paints and varnishes. Determination of "soluble" metal content. Part 3: Determination of barium content. Flame atomic emission spectroscopic method
  • DS/EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods – Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with triaxial cell

AENOR, How to measure the magnetism of metals

  • UNE-EN 60404-6:2004 Magnetic materials -- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
  • UNE-EN ISO 21968:2006 Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase sensitive eddy-current method (ISO 21968:2005)
  • UNE-EN 60404-14:2004 Magnetic materials -- Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • UNE-EN ISO 8401:2017 Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
  • UNE-EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
  • UNE-EN ISO 2738:2000 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO 2738:1999)

YU-JUS, How to measure the magnetism of metals

  • JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
  • JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.
  • JUS C.A6.035-1989 Non-conductlve coatlng on non-magvetic basis metals. Measurement of coatlng thickness. Eddy current method
  • JUS K.F0.009-1989 Gralns of fused alumlnium oxfde and sllicon carbide for abrasive products. Determlnatlon of the content of magnetJe materlals
  • JUS C.A2.041-1990 Perneable sintered metal materials. Determinaticm of densitj, oil content and open porosity

IT-UNI, How to measure the magnetism of metals

Japanese Industrial Standards Committee (JISC), How to measure the magnetism of metals

  • JIS H 7152:1996 Methods of measurement of the magnetic properties of amorphous metals by means of a single sheet tester
  • JIS Z 2383:1998 Standard specimens of metals and alloys, Determination of corrosion rate of standard specimens for the evaluation of corrosivity of atmospheres
  • JIS M 8101:1988 Methods for sampling, preparation and determination of moisture content of non-ferrous metal bearing ores
  • JIS Z 2285:2003 Measuring method of coefficient of linear thermal expansion of metallic materials
  • JIS H 7505:2004 Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen
  • JIS H 7801:2005 Method for measuring thermal diffusivity of metals by the laser flash method
  • JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
  • JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
  • JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement

Lithuanian Standards Office , How to measure the magnetism of metals

  • LST 1539-1998 Confectionery. Methods of determination of ash and metallomagnetic admixture content
  • LST EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005)
  • LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)
  • LST EN ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003)
  • LST EN 60404-14-2003 Magnetic materials. Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002)
  • LST EN ISO 8401:2001 Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986)
  • LST EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
  • LST EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
  • LST EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
  • LST EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)

RU-GOST R, How to measure the magnetism of metals

  • GOST 13496.9-1996 Mixed feeds. Methods for determination of metallomagnetic impurity
  • GOST 13496.9-1973 Mixed feed. Methods for the determination of metallomagnetic impurities
  • GOST R 52005-2003 Non-destructive testing. Method using metal magnetic memory. General requirements
  • GOST 5901-2014 Sonfectionery. Methods for determination of ash and metal magnetic admixture mass fraction
  • GOST 30642-1999 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content
  • GOST 26190-1984 Metal-cutting machine tools. Methods of checking cylindrical specimens for size constancy within one batch
  • GOST 8.633-2013 State system for ensuring the uniformity of measurements. Technical metallic gauging tanks. Verification procedure
  • GOST 30483-1997 Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles
  • GOST 8.063-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the metals and alloys hardness on Vickers scales
  • GOST 8.063-2012 State system for ensuring the uniformity of measurements. State verification schedule for means measuring of metals and alloys on Vickers scales hardness
  • GOST 8.063-1979 State system for ensuring the uniformity of measurements. State special standard and the all-union verification schedule for means measuring of hardness on Vickers scales
  • GOST 8.400-2013 State system for ensuring the uniformity of measurements. Standard metallic gauges. Verification procedure
  • GOST R 8.904-2015 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
  • GOST 31484-2012 Mixed feeds, protein-vitamin-mineral concentrates, premixes. Methods for determination of metallomagnetic impurity
  • GOST R 8.747-2011 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block
  • GOST R 50.05.03-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination and thickness measurement of monometal, bimetal, and corrosion-resistant cladding
  • GOST 30550-1998 Metallic of powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders

国家市场监督管理总局、中国国家标准化管理委员会, How to measure the magnetism of metals

  • GB/T 38086-2019 Determination of metallothionein (MT) in biological samples
  • GB/T 35033-2018 Measurement method on conductive properties of electromagnetic shielding material and bonding impedance of metal material for 30MHz to 1GHz
  • GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
  • GB/T 19292.3-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres

CZ-CSN, How to measure the magnetism of metals

  • CSN 56 0065-1985 Methods of sample mineralization before the determination of heavy metals content in the foodstuffs
  • CSN 34 5887 Z1-1999
  • CSN ISO 9225:1994 Corrosion of metals and alloys.Corrosivity of atmospheres.Measurement of pollution
  • CSN IEC 404-6:1993 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
  • CSN 42 0890 Cast.15-1986 Testing of metal powders. Gravimetric method for detBrmination of acid-insoluble residue content
  • CSN ISO 9226:1994 Corrosion of metals and alloys.Corrosivity of atmospheres.Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • CSN 03 8361-1990 Principles of measuring the corrosion prevention of earth placed metallic devices. Soil and water physicochemical analysis

NO-SN, How to measure the magnetism of metals

  • NS 4784-1988 Water analysis - Sampling of natural waters for determination of trace metals

RO-ASRO, How to measure the magnetism of metals

  • SR CEI 404-5-1996 Magnetic materials Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
  • STAS SR ISO 8401:1994 Metallic coatings. Review of methods of measurement of ductility
  • STAS 8342/1-1986 MILK AND MILK PRODUCTS.Decomposition of test samples prior to determination of metals and arsenic content
  • STAS 12341/1-1985 DETERMINATION OF THE DELTA FERR1TE CONTENT IN A US TENITIC STAINLESS WELD METAL Magnetic contact method. Technical requirements
  • STAS 10542/1-1986 MEAT AND MEAT PRODUCTS Decomposition of test samples prior to determination of metals and arsenic content
  • STAS 11393-1991 Non-conductive coatings on non-magnetic basis metals. Coating thickness determination by eddy current method
  • STAS SR ISO 9226:1995 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity

Professional Standard - Aerospace, How to measure the magnetism of metals

  • QJ 1072-1986 Eddy current method for measuring the thickness of nonconductive coatings on nonmagnetic base metals

United States Navy, How to measure the magnetism of metals

  • NAVY MIL-HDBK-270 A-1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)

Professional Standard - Commodity Inspection, How to measure the magnetism of metals

  • SN/T 4059-2014 Determination of magnetic metal particles in paprika condiment for export

WRC - Welding Research Council, How to measure the magnetism of metals

  • BULLETIN 318-1986 FACTORS INFLUENCING THE MEASUREMENT OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL USING MAGNETIC INSTRUMENTS ; MEASUREMENTS OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL GI

AWS - American Welding Society, How to measure the magnetism of metals

  • A4.2-1974 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL
  • A4.2-1986 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL
  • A4.2-1991 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferritic Stainless Steel Weld Metal
  • A4.2M/A4.2-1997 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
  • A4.2M-2006 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal

HU-MSZT, How to measure the magnetism of metals

KR-KS, How to measure the magnetism of metals

  • KS C IEC 60404-14-2022 Magnetic materials — Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
  • KS D ISO 9226-2018(2023) Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • KS D ISO 9226-2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • KS D ISO 7625-2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
  • KS D ISO 7625-2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
  • KS D ISO 9225-2018 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
  • KS D ISO 9225-2018(2023) Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
  • KS D ISO 2738-2011 Sintered metal materials, excluding hardmetals－Permeable sintered metal materials－Determination of density, oil content and open porosity
  • KS M ISO 3856-3-2022 Paints and varnishes — Determination of “soluble” metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method
  • KS B ISO 14372-2019 Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure the magnetism of metals

  • GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
  • GB/T 33422-2016 Thermoplastic elastomer—Determination of heavy metal contents— Inductively coupled plasma atomic emission spectrometric method
  • GB/T 4702.17-2016 Chromium metal─Determination of oxygen, nitrogen and hydrogen content─Inert gas fusion thermal infrared detection method and conductivity method

American National Standards Institute （ANSI), How to measure the magnetism of metals

  • ANSI/AWS A4.2M:2006 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
  • ANSI/ASTM E2694:2011 Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
  • ANSI/ASTM E2694:2016 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

Standard Association of Australia （SAA）, How to measure the magnetism of metals

NEMA - National Electrical Manufacturers Association, How to measure the magnetism of metals

  • NEMA C78.387-1987 ELECTRIC LAMPS - METAL-HALIDE LAMPS - METHODS OF MEASURING CHARACTERISTICS

GOSTR, How to measure the magnetism of metals

  • GOST 5901-1987 Confectionery. Methods for determination of ash and metallomagnetic admixture content
  • GOST R ISO 24497-3-2009 Non-destructive testing. Metal magnetic memory method. Part 3. Inspection of welded joints
  • GOST R 8.969-2019 State system for ensuring the uniformity of measurements. Metals and alloys. Leeb hardness test. Part 1: Test method

PL-PKN, How to measure the magnetism of metals

  • PN M55551-28-1988 Metal cutting machin? tools Methods of measurement of positioning repetability
  • PN M55551-08-1986 Metal cutting machin? tools ethods of measurement f dimensional stability of test pieces
  • PN M55551-10-1985 Metal cutting machin? tools ethod of measurement of diameter tability of test piece
  • PN M55551-11-1987 Metal cutting machine tools Method of measurement of diameter stability of test piece
  • PN M55551-15-1987 Metal cutting machin? tools ethods of measurement the arallelism of an ax*s to a piane
  • PN M55551-20-1986 Metal cutting, machin? tools ethods of measurement position ngulaY stability of a componeW f a machin? tool
  • PN M55551-22-1987 Metal cutting machin? tools Methods of measurement of straightness and parallelism of a motion to the reference surface
  • PN M55551-18-1986 Metal cutting machin? tools ethod of measurement of straightness nd parallelism between two planes
  • PN M55551-23-1986 Metal cutting machin? tools Methods of measurement of parallelism of a trajectory to a plan or to an axis
  • PN M55551-24-1986 Metal cutting machin? tools Methods of measurement of squareness of a motion to a plan or to an axis

American Railway Engineering and Maintenance-of-Way Association (AREMA), How to measure the magnetism of metals

  • AREMA CH 3-8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote

Association of German Mechanical Engineers, How to measure the magnetism of metals

  • VDI 3868 Blatt 1-1994 Determination of total emission of metals, metalloids, and their compounds - Manual measurement in flowing, emitted gases - Sampling system for particulate and filter-passing matter

Professional Standard - Light Industry, How to measure the magnetism of metals

  • QB/T 3834-1999 Thickness testing method of the metal deposits and conversion coatings for the light industrial products.Magnetic method

BELST, How to measure the magnetism of metals

  • STB 1515-2004 Metal panels with warming. The methods of measurements geometrical characteristics
  • STB 8084-2019 System for ensuring the uniformity of measurements of the Republic of Belarus. Measuring rulers, metal. Methods of verification

American Welding Society (AWS), How to measure the magnetism of metals

  • AWS A4.2M/A4.2-1997 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal

CU-NC, How to measure the magnetism of metals

  • NC 12-04-26-1989 Standards System for Protection Against Corrosion. Metallic and Non-Metallic Coatings. General Requirements of Non-destructive Methods for Thickness Measurement

未注明发布机构, How to measure the magnetism of metals

  • BS 3338-13:1965(2011) Method for The determination of antimony in solders and white metal bearing alloys (Volumetric : potassium bromate method) — Methods for the sampling and analysis oftin and tin alloys
  • DIN EN ISO 14372:2002 Determination of moisture resistance of manual metal arc DIN welding electrodes by measurement of diffusible hydrogen

IN-BIS, How to measure the magnetism of metals

ES-AENOR, How to measure the magnetism of metals

CEN - European Committee for Standardization, How to measure the magnetism of metals

  • EN ISO 9016:2022 Destructive tests on welds in metallic materials - Impact tests - Test specimen location@ notch orientation and examination
  • EN ISO 9016:2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location@ notch orientation and examination
  • EN 13144:2018 Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test

PT-IPQ, How to measure the magnetism of metals

  • NP EN 12373-13-2001 Aluminium and aluminium alloys Anodizing Part 13:Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abriged goniophotometer
  • NP EN ISO 13937-4:2001 Textiles Tear properties of fabrics Part 4:Determination of tear force of tongue-shaped test specimens(Double tear test)(ISO 13937-4:2000)

Sichuan Provincial Standard of the People's Republic of China, How to measure the magnetism of metals

  • DB51/T 1910-2014 Sample pretreatment specification for determination of trace heavy metals in forest food and its environment by atomic absorption method

Professional Standard - Non-ferrous Metal, How to measure the magnetism of metals

  • YS/T 1047.9-2015 Methods for chemical analysis of copper magnetite.Part 9:Determination of metallic iron content.Sulfosalicylic acid photometric method

Group Standards of the People's Republic of China, How to measure the magnetism of metals

  • T/CSTM 00753-2023 Metallic materials—Determination of argon content—Inert gas fusion mass spectrometric method

NL-NEN, How to measure the magnetism of metals

  • NEN 5744-1991 Soil - Sampling of groundwater for the determination of metals, inorganic compounds, moderate volatile organic compounds and physico-chemical properties

SG-SPRING SG1, How to measure the magnetism of metals

  • SS 375-2-1-2015 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 2:1: Methods of test - Samples for testing

NATO - North Atlantic Treaty Organization, How to measure the magnetism of metals

  • STANAG 4435-1993 Electromagnetic Compatibility Testing Procedure and Requirements for Naval Electrical and Electronic Equipment (Surface Ship@ Metallic Hull) (ED 1 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Off

SG-SPRING SG, How to measure the magnetism of metals

  • SS 375 Pt.2-1-2001 SPECIFICATION FOR Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2:1: Methods of test - Samples of testing

  How to measure the magnetism of metals.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved