ZH
RU
ES

Tester Consistency Check

Tester Consistency Check, Total:273 items.

In the international standard classification, Tester Consistency Check involves: Metrology and measurement in general, Welding, brazing and soldering, Languages used in information technology, Linear and angular measurements, Character sets and information coding, Refractories, Alarm and warning systems, Measurement of volume, mass, density, viscosity, Construction materials, Railway rolling stock, Acoustics and acoustic measurements, Open systems interconnection (OSI), Radiocommunications, Optics and optical measurements, Interface and interconnection equipment, Refrigerating technology, Networking, Measurement of force, weight and pressure, Thermodynamics and temperature measurements, Medical equipment, Surface treatment and coating, Applications of information technology, Pesticides and other agrochemicals, General methods of tests and analysis for food products, Farming and forestry, Software development and system documentation, Road engineering, Testing of metals, Protective equipment, Electrical equipment for working in special conditions, Industrial automation systems, Characteristics and design of machines, apparatus, equipment, Diagnostic, maintenance and test equipment, Environmental testing, Mobile services, Electrical and electronic testing, Water quality, Mechanical testing, Protection against fire, Insulating materials, Petroleum products in general, Law. Administration, Analytical chemistry, Road vehicle systems, Optical equipment, Veterinary medicine, Laboratory medicine, Air quality, Fibre optic communications, Electromechanical components for electronic and telecommunications equipment, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Noise with respect to human beings, Electrical wires and cables.

Military Standard of the People's Republic of China-General Armament Department, Tester Consistency Check

GJB 2765.5-1996 Data Network Protocol Conformance Testing and Conformance Evaluation Process Requirements for Testing Laboratories and Users
GJB 8699.7-2015 Aerial Bomb Test Methods Part 7: General Testing of Sealing Properties

RU-GOST R, Tester Consistency Check

GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST R 8.835-2013 State system for ensuring the uniformity of measurements. Automatic catchweighing instruments. Part 2. Test report format
GOST R 53188.2-2010 State system for ensuring the uniformity of measurements. Sound level meters. Part 2. Test methods
GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
GOST R 8.690-2009 State system for ensuring the uniformity of measurements. Use of proficiency testing by interlaboratory comparisons for accreditation in testing
GOST R 8.726-2010 State system for ensuring the uniformity of measurements. Load cells. Metrological and technical requirements. Tests
GOST R 8.928-2016 State system for ensuring the uniformity of measurements. Expert evaluation of test results obtained from different laboratories
GOST R ISO/IEC 9646-5-1993 Information technology. Open systems interconnection. Conformance testing methodology and framework. Part 5. Requirements on test laboratories and clients for the conformance assessment process
GOST 8.631-2013 State system for ensuring the uniformity of measurements. Load cells. Metrological and technical requirements. Testing methods
GOST R 8.825-2013 State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Methods of accelerated tests
GOST R 8.689-2009 Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment
GOST R 8.747-2011 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block
GOST R ISO 12866-2011 State system for ensuring the uniformity of measurements. Ophthalmic perimeters. Technical requirements and test methods
GOST 8.622-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination respiratory protective devices total inward leakage with using test aerosol. Verification method
GOST 8.621-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of resistance to clogging for respiratory protective devices particle filters. Verification method
GOST R 8.906-2015 State system for ensuring the uniformity of measurements. Indication pressure gauges. Reference measuring instruments. Metrological requirements and test methods
GOST R 8.905-2015 State system for ensuring the uniformity of measurements. Indicating pressure gauges. Ordinary measuring instruments. Metrological requirements and test methods
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST 27883-1988 Industrial process measurement and control equipment. Reliability. General requirements and test methods
GOST R 8.714-2010 State system for ensuring the uniformity of measurements. Octave-band and fractional-octave-band filters. Technical requirements and test methods
GOST R 8.908-2015 State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST 8.620-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of particle filter penetration for respiratory protective devices. Verification method
GOST R 8.834-2013 State system for ensuring the uniformity of measurements. Automatic gravimetric filling instruments. Part 2. Test report format
GOST R 8.904-2015 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST 8.647-2015 State system for ensuring the uniformity of measurements. Automatic rail-weighbridges. Part 1. Metrological and technical requirements. Test methods
GOST R 8.855-2013 State system for ensuring the uniformity of measurements. Standart platinum and rhodium-iron resistance thermometers. General requirements and test methods
GOST R 8.625-2006 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. General technical requirements and test methods
GOST 8.619-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of breakthrough time for respiratory protective devices gas filters. Verification method
GOST R 8.915-2016 State system for ensuring the uniformity of measurements. Diaphragm volumetric gas meters. General technical requirements, test and calibration methods
GOST R 8.744-2011 State system for ensuring the uniformity of measurements. Optics and photonics. Interferometric measurement of optical elements and optical systems. Part 3. Calibration and validation of interferometric test equipment and measurements
GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
GOST R 8.891-2015 State system for ensuring the uniformity of measurements. Measuring and indicating biochemistry test system. Technical and metrological requirements. Basic principles
GOST R 8.720-2010 State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fiber-optical transfer systems. Verification procedure
GOST R ISO 10303-32-2002 Industrial automation systems and integration. Product data representation and exchange. Part 32. Conformance testing methodology and framework. Requirements on testing laboratories and clients
GOST R ISO 17123-2-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 2. Levels
GOST R ISO 17123-3-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 3. Theodolites
GOST R 8.900-2015 State system for ensuring the uniformity of measurements. Scale automatic digital for total registration. Part 1. Metrological and technical requirements. Tests
GOST R ISO 17123-7-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 7. Optical plumbing instruments
GOST R ISO 17123-4-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Elektro-optical distance meters (EDM instruments)
GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods
GOST R 50.05.05-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of base materials (semi-finished products)
GOST R ISO 389-9-2014 State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 9. Preferred test conditions for the determination of reference hearing threshold levels
GOST R 50.05.02-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of welded joints and cladded surfaces
GOST R ISO 17123-8-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 8. GNSS field measurement systems in real-time kinematic (RTK)

British Standards Institution (BSI), Tester Consistency Check

BS EN IEC 60974-14:2018 Arc welding equipment - Calibration, validation and consistency testing
BS ISO 10303-32:1998 Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testing laboratories and clients
BS EN IEC 61223-3-5:2019 Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of computed tomography X-ray equipment
BS ISO/IEC 13210:2000 Information technology - Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX standards
BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases - General requirements and test methods
BS ISO 20730-2:2022 Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI) - Application and communication requirements conformance test plan
BS EN 16479:2014 Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water
BS EN IEC 61223-3-7:2021 Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of X-ray equipment for dental cone beam computed tomography
BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
BS EN 50545-1:2011+A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
BS EN IEC 61223-3-6:2020 Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation
22/30424826 DC BS ISO 20730-2 . Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI). Part 2. Application and communication requirements conformance test plan
PD IEC TR 61010-3-032:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test
BS ISO/IEC 29109-8:2012 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Finger pattern skeletal data
BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods

Korean Agency for Technology and Standards (KATS), Tester Consistency Check

KS X 2023-2001(2021) Information technology－Test methods for measuring conformance to POSIX
KS X 2023-2001(2017) Information technology－Test methods for measuring conformance to POSIX
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS F 2428-2020 Standard test method for concrete fluidity by vibrating table for consistency measurement
KS X ISO/IEC 9646-4:2008 Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 4:Test realization
KS C IEC 61223-2-5:2013 Evaluation and routine testing in medical imaging departments－Part 2－5：Constancy tests－Image display devices
KS F 2452-2010(2020) Standard test method for determination of the consistency of fresh concrete by evaluating the degree of compactibility
KS C IEC 61223-2-4:2013 Evaluation and routine testing in medical imaging departments－Part 2－4：Constancy tests－Hard copy cameras
KS C IEC 61223-2-1:2005 Evaluation and routine testing in medical imaging departments－Part 2－1：Constancy tests－Film processors
KS C IEC 61223-2-4-2005(2008) Evaluation and routine testing in medical imaging departments－Part 2－4：Constancy tests－Hard copy cameras
KS A IEC 60605-6-2003(2018)
KS B ISO 10303-32:2002 Industrial automation system and integration－Product data representation and exchange－Part 32：Conformance testing methodology and framwork－Requirement on testing laboratories and clients
KS C IEC 60512-2-2004(2009) Electromechanical components for electronic eqipment－Basic testing procedures and measuring methods－Part 2：General examination, electrical continuity and contact resistance tests, insulation tests and
KS B ISO 10303-32-2002(2018) Industrial automation system and integration－Product data representation and exchange－Part 32：Conformance testing methodology and framwork－Requirement on testing laboratories and clients
KS X ISO/IEC 14367-2003(2008) Information technology－Test methods for measuring conformance to MHS－based electronic messaging C language interfaces－Binding for Application Program Interface(API)
KS C IEC 60512-2:2004 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
KS C IEC 60512-2:2014 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
KS X ISO/IEC 14362:2008 Information technology－Test methods for measuring conformance to Open Systems Interconnection(OSI) abstract data manipulation－Application Program Interface(API)(Language independent)
KS X ISO/IEC 14362:2013 Information technology－Test methods for measuring conformance to Open Systems Interconnection(OSI) abstract data manipulation－Application Program Interface(API)(Language independent)
KS X ISO/IEC 14366-2003(2008) Information technology－Test methods for measuring conformance to Open Systems Interconnection(OSI) abstract data manipulation C language interfaces－Binding for Application Program Interface(API)
KS P ISO TS 17822-1:2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi
KS X ISO/IEC 10025-1:2007 Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol－Part 1：Test suite structure and test purposes fo
KS X ISO/IEC 10025-1:2012 Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol－Part 1：Test suite structure and test purposes for ISO/IEC 8073：1988 classes 0, 2 over CONS and 4 over C
KS B ISO 10303-35:2005 Industrial automation systems and integration-Product data representation and exchange-Part 35:Conformance testing methodology and framework:Abstract test methods for standard data access interface (SDAI) implementations

European Committee for Standardization (CEN), Tester Consistency Check

EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
EN ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications ISO 14253-1:1998
EN ISO/IEC 9646-5:1996 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements on Test Laboratories and Clients for the Conformance Assessment Process (ISO/IEC 9646-5 : 1994)

International Organization for Standardization (ISO), Tester Consistency Check

ISO 14253-1:2013 Geometrical product specifications (GPS).Inspection by measurement of workpieces and measuring equipment.Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 1: Decision rules for proving conformance or non-conformance with specifications
ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO/IEC 13210:1994 Information technology — Test methods for measuring conformance to POSIX
ISO/IEC 9646-5:1994 Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process
ISO 20730-2:2022 Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 2: Application and communication requirements conformance test plan
ISO 16845-2:2018 Road vehicles - Controller area network (CAN) conformance test plan - Part 2: High-speed medium access unit - Conformance test plan
ISO/IEC 14515-2:2004 Information technology - Portable Operating System Interface (POSIXę) - Test methods for measuring conformance to POSIX - Part 2: Shell and utilities
ISO 10303-32:1998 Industrial automation systems and integration - Product data representation and exchange - Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
ISO/IEC 14515-2:2003 Information technology - Portable Operating System Interface (POSIX?) - Test methods for measuring conformance to POSIX - Part 2: Shell and utilities
ISO/IEC 14363:1996 Information technology — Test methods for measuring conformance to MHS-based electronic messaging — Application Program Interface (API) (Language independent)
ISO/IEC 9314-20:2001 Information technology - Fibre distributed data interface (FDDI) - Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (PMD ATS)
ISO/IEC 24709-3:2011 Information technology. Conformance testing for the biometric application programming interface (BioAPI). Part 3: Test assertions for BioAPI frameworks
ISO/TS 10303-35:2003 Industrial automation systems and integration - Product data representation and exchange - Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations
ISO/IEC 10025-1:1995 Information technology — Telecommunications and information exchange between systems — Transport conformance testing for connection-mode transport protocol — Part 1: Test suite structure and test purp

European Telecommunications Standards Institute (ETSI), Tester Consistency Check

ETSI TS 103 253-2015 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite for use of XML schema; Implementation Conformance Statement (V1.1.1)
ETSI TS 101 580-1-2013 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Rx interface (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) (V2.1.1)
ETSI TS 101 606-1-2013 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Gx interface (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) (V2.1.1)
ETSI TR 103 061-6-2015 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Security; Part 6: Validation report (V1.1.1)
ETSI TS 102 950-2-2014 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.4.1)
ETSI TR 101 611-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specification for CALM Fast Services; FNTP/FSAP/IICP validation report (V1.1.1)
ETSI TS 103 254-2015 Methods for Testing and Specifications (MTS); TTCN-3 Conformance Test Suite for use of XML schema; Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
ETSI TS 101 606-2-2013 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Gx interface (3GPP Release 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP) (V2.1.1)
ETSI TS 101 580-2-2013 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Rx interface (3GPP Release 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP) (V2.1.1)
ETSI TS 102 950-3-2014 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 3: Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT) (V1.4.1; Includes Diskette)
ETSI TR 103 061-1-2014 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specifications for Co-operative Awareness Messages (CAM); CAM validation report (V1.2.1)
ETSI TS 103 289-2-2015 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Cx and Dx interfaces; (3GPP Release 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP) (V1.1.1)
ETSI TR 103 061-1-2012 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specification for Co-operative Awareness Messages (CAM); CAM validation report V1.1.1
ETSI TS 103 255-2015 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite for use of XML schema; Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT) (V1.1.1; Includes Diskette)
ETSI TR 103 061-2-2012 Intelligent Transport Systems (ITS); Testing; Part 2: Conformance test specification for Decentralized Environmental Notification basic Service Message (DENM); DENM validation report V1.1.1
ETSI TR 103 061-2-2014 Intelligent Transport Systems (ITS); Testing; Part 2: Conformance test specifications for Decentralized Environmental Notification basic service Messages (DENM); DENM validation report (V1.2.1)
ETSI TR 103 278-2014 Core Network and Interoperability Testing (INT); IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Conformance Testing; (3GPP Release 10); Validation report (V1.1.1)
ETSI TS 101 606-3-2013 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Gx interface (3GPP Release 10); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification (V2.1.1; I
ETSI TR 103 061-4-2012 Intelligent Transport Systems (ITS); Testing; Part 4: Conformance test specification for GeoNetworking Basic Transport Protocol (BTP); GeoNetworking BTP validation report (V1.1.1)
ETSI TR 103 061-3-2014 Intelligent Transport Systems (ITS); Testing; Part 3: Conformance test specifications for Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; GeoNetworking validation report (V1.2.1)
ETSI TS 103 289-3-2015 Core Network and Interoperability Testing (INT); Diameter Conformance testing for Cx and Dx interfaces; (3GPP Release 10); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification (
ETSI TR 103 061-3-2012 Intelligent Transport Systems (ITS); Testing; Part 3: Conformance test specification for Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; GeoNetworking validation report V1.1.1

SA-SASO, Tester Consistency Check

SASO SSA 379-1983 CONSISTENCY TEST FOR FRESH CONCRETE PART 1:SLUMP TEST

American National Standards Institute （ANSI), Tester Consistency Check

ANSI/INCITS/ISO/IEC 14496-4/AMD 1:2009 Information technology - Coding of audio-visual objects - Part 4: Conformance testing for MPEG-4 - Amendment 1: Conformance testing for MPEG-4
ANSI/ASTM D6708:2013 Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ANSI/INCITS/ISO/IEC 24709-3:2011 Information technology - Conformance testing for the biometric application programming interface (BioAPI) - Part 3: Test assertions for BioAPI frameworks

Association Francaise de Normalisation, Tester Consistency Check

NF A85-009-14*NF EN 60974-14:2018 Arc welding equipment - Part 14 : calibration, validation and consistency testing
NF EN 60974-14:2018 Matériel de soudage à l'arc - Partie 14 : étalonnage, validation et essais de consistance
NF X45-301-1:1993 Filter cartridges - Test methods - Integrity inspection - Part1: Determination of the first bubble point
NF V03-080-4*NF EN 1528-4:1997 Fatty food. Determination of pesticides and polychlorinated biphenyls (pcbs). Part 4 : determination, confirmatory tests, miscellaneous.
NF P98-276-2:1994 TEST RELATING TO PAVEMENTS. MEASUREMENT OF CHIPPING AGGREGATES RATE. PART 2 : DETERMINATION OF TRANSVERSAL REGULARITY.
NF T90-553*NF EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
NF X20-703*NF EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
NF U47-307:2004 Animal health analysis methods - Control protocol of reagents for the detection of antibodies directed against bovine brucellosis by the ELISA method in sera (individual sera or pools of ten sera).
NF C23-504-1/A1*NF EN 50545-1/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
NF C23-504-1*NF EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides.
NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF E29-790*NF EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without valve, for use with portable appliances - Construction, inspection, testing and marking
NF C32-024/A1:2001 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1 : general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties.

CENELEC - European Committee for Electrotechnical Standardization, Tester Consistency Check

EN IEC 60974-14:2018 Arc welding equipment - Part 14: Calibration@ validation and consistency testing
EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

ES-UNE, Tester Consistency Check

UNE-EN IEC 60974-14:2018 Arc welding equipment - Part 14: Calibration, validation and consistency testing (Endorsed by Asociación Española de Normalización in January of 2019.)
UNE-EN IEC 60974-14:2018/AC:2022-02 Arc welding equipment - Part 14: Calibration, validation and consistency testing (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN 50545-1:2012/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

未注明发布机构, Tester Consistency Check

BS EN IEC 60974-14:2018(2022) Arc welding equipment Part 14 : Calibration, validation and consistency testing
ETSI TS 103 254 Test Methods and Specifications (MTS). TTCN-3 Conformance Test Suite using XML Schemas. Test Suite Structure and Test Purpose (TSS&TP) (V1.1.1)

American Society for Testing and Materials (ASTM), Tester Consistency Check

ASTM C1445-99 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
ASTM F1080-93(1998) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
ASTM F1080-93(2019) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
ASTM C860-15(2019) Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
ASTM F2964-12 Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
ASTM C1170/C1170M-14 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1170/C1170M-14e1 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
ASTM C1446-99 Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
ASTM G156-97 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
ASTM D6708-05 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-06 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-19ae1 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-19 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-04 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-01e1 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-01 Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-21 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-16b Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-07 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-18 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-19a Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-13 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-13e1 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-15 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-16 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

International Telecommunication Union (ITU), Tester Consistency Check

ITU-T X.295-1995 OSI Conformance Testing Methodology and Framework for Protocol Recommendations for ITU-T Applications - Protocol Profile Test Specification - Data Networks and Open System Communications - Open Systems Interconnection - Conformance Testing (Study Group 7)
ITU-T X.294-1995 OSI Conformance Testing Methodology and Framework for Protocol Recommendations for ITU-T Applications - Requirements on Test Laboratories and Clients for the Conformance Assessment Process - Data Networks and Open System Communications Open Systems Interc
ITU-T X.294 FRENCH-1995 OSI CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROTOCOL RECOMMENDATIONS FOR ITU-T APPLICATIONS - REQUIREMENTS ON TEST LABORATORIES AND CLIENTS FOR THE CONFORMANCE ASSESSMENT PROCESS
ITU-T X.294 SPANISH-1995 OSI CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROTOCOL RECOMMENDATIONS FOR ITU-T APPLICATIONS - REQUIREMENTS ON TEST LABORATORIES AND CLIENTS FOR THE CONFORMANCE ASSESSMENT PROCESS
ITU-T X.295 FRENCH-1995 OSI CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROTOCOL RECOMMENDATIONS FOR ITU-T APPLICATIONS - PROTOCOL PROFILE TEST SPECIFICATION
ITU-T X.295 SPANISH-1995 OSI CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROTOCOL RECOMMENDATIONS FOR ITU-T APPLICATIONS - PROTOCOL PROFILE TEST SPECIFICATION
ITU-T Z.500 FRENCH-1997 Framework on formal methods in conformance testing
ITU-T Z.500 SPANISH-1997 Framework on formal methods in conformance testing

International Electrotechnical Commission (IEC), Tester Consistency Check

IEC 62888-5:2018 Railway applications - Energy measurement on board trains - Part 5: Conformance test
IEC 60974-14:2018/COR1:2022 Corrigendum 1 - Arc welding equipment - Part 14: Calibration, validation and consistency testing
IEC 89/1069/CD:2011 IEC/TS 60695-2-20, Ed. 3.0: Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot wire ignition test - Apparatus, confirmatory test arrangement and guidance
IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
IEC 60512-2:1985 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 2 : General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
IEC TR 61010-3-031:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002; Safety requirements for hand-held probe assemblies for electrical test and measurement
IEC 60512-2/AMD1:1994 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests; Amendment 1
IEC TR 61010-3-032:2000 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-032: Conformity verification report for IEC 61010-2-032:1994 - Particular requirements for hand-held current clamps for electrical measurement and test

GOSTR, Tester Consistency Check

GOST R 53188.2-2019 State system for ensuring the uniformity of measurements. Sound level meters. Part 2. Test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tester Consistency Check

GB/T 17178.5-2011 Information technology.Open systems interconnection.Conformance testing methodology and framework.Part 5:Requirement on test laboratories and clients for the conformance assessment process
GB/T 5095.2-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 16656.32-1999 Industrial automation systems and integration--Product data representation and exchange--Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients

German Institute for Standardization, Tester Consistency Check

DIN EN 301126-1:2000 Fixed Radio Systems - Conformance testing - Part 1: Point-to-point equipment; definitions, general requirements and test procedures (Endorsement of the English version EN 301126-1 V 1.1.2 (1999-09) as German standard)
DIN ETS 300836-1:1999 Broadband Radio Access networks (BRAN) - HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance testing specification - Part 1: Radio type approval and Radio Frequency (RF) conformance test specification (Endorsement of the English versi
DIN EN 1170-1:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997
DIN ETS 300394-4-10:2000 Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-10: Abstract Test Suite (ATS) for Direct Mode Gateway (DM-GATE) (Endorsement of the English version
DIN VDE 0404-1:2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 1: General requirements
DIN 6868-159:2021-04 Image quality assurance in diagnostic X-ray departments - Part 159: Acceptance and constancy testing in teleradiology
DIN ETS 300394-4-1:2000 Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-1: Test Suite Structure and test Purposes (TSS&TP) for Mobile Station to Mobile Station (MS-MS) Air
DIN EN 50545-1:2017 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
DIN EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods; German version EN 15964:2011
DIN EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides; German ver
DIN EN 301811-1-2:2001 Broadband Radio Access Networks (BRAN) - HIPERLAN Type 2; Conformance testing for the packet based convergence layer - Part 1: Common part; Sub-part 2: Test suite structure and test purposes (TSS&TP) specification (Endorsement of the English version EN 30
DIN EN 301823-1-2:2001 Broadband Radio Access Networks (BRAN) - HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol - Part 1: Basic data transport function; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (Endorsement of the E
DIN EN 301823-2-2:2001 Broadband Radio Access Networks (BRAN) - HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol - Part 2: Radio Link Control (RLC) sublayer; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (Endorsement of t

NO-SN, Tester Consistency Check

NS 8000-1982 Geotechnical testing - Laboratory methods - Consistency limits - Terms and symbols

Canadian Standards Association (CSA), Tester Consistency Check

CSA ISO/IEC-9646-5-CAN/CSA:1995 Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 5: Requirements on Test Laboratories and Clients for the Conformance Assessment Process R(1999)
CSA ISO/IEC TR 18047-3-05-CAN/CSA CORR 1:2008 Information technology ?Radio frequency identification device conformance test methods ?Part 3: Test methods for air interface communications at 13,56 MHz TECHNICAL CORRIGENDUM 1
CSA ISO/IEC-14515-1-02:2002 Information technology Portable Operating System Interface (POSIX) Test methods for measuring conformance to POSIX Part 1: System interfaces ISO/IEC 14515-1:2000 / IEEE Std.2003.1, 1992
CSA ISO/IEC 9314-21-04:2004 Information technology Fibre Distributed Data Interface (FDDI) Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (PHY ATS) ISO/IEC 9314-21: 2000
CSA ISO/IEC 9314-20-04:2004 Information technology Fibre distributed data interface (FDDI) Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (PMD ATS) ISO/IEC 9314-20: 2001

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Tester Consistency Check

ITU-T X.294-1992 OSI Conformance Testing Methodology and Framework for Protocol Recommendations for CCITT Applications - Requirements on Test Laboratories and Clients for the Conformance Assessment Process (Study Group VII) 34 pp

AT-ON, Tester Consistency Check

ONORM EN 29646-4-1992 Information technology - Open Systems Interconnection -Conformance testing methodology and framework -Test realization
ONORM EN 29646-2-1992 Information technology - Open Systems Interconnection -Conformance testing methodology and framework -Abstract test suite specification

Institute of Electrical and Electronics Engineers (IEEE), Tester Consistency Check

IEEE 1003.3-1994 Information technology - Test methods for measuring conformance to POSIX
IEEE 1802.3D-1993 Conformance test methodology for IEEE Standards for Local and Metropolitan Area Networks: Supplement to Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications: Type 10BASE-T Medium Attachment Unit
IEEE 1326.2-1993 Information technology; test methods for measuring conformance to directory services; application program interface (API) language independent
IEEE 2003.2-1996 Standard for Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities Interfaces IEEE Computer Society Document
IEEE 1802.3-1991 Conformance test methodology for IEEE standards for local and metropolitan area networks; carrier sense multiple access with collision detection (CSMA/CD) access method with physical layer specifications; attachment unit interface (AUI) cable (section 4)
IEEE Std 1802.3d-1993 Conformance Test Methodology for IEEE Standards for Local and Metropolitan Area Networks: Supplement to Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications: Type 10BASE - T Medium Attachment U
IEEE Std P1802.3/D3.0 Draft IEEE Conformance Test Methodology for IEEE Standard for Local and Metropolitan Area Networks: Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications: Attachment Unit Interface (AUI) Cable (Se

Japanese Industrial Standards Committee (JISC), Tester Consistency Check

JIS B 8603:1989 Performance testing and inspection methods by air for open type reciprocating refrigerant compressors
JIS B 3700-32:2000 Industrial automation systems and integration -- Product data representation and exchange -- Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
JIS B 3700-34:2003 Industrial automation systems and integration -- Product data representation and exchange -- Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations

ETSI - European Telecommunications Standards Institute, Tester Consistency Check

TR 103 061-6-2015 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Security; Part 6: Validation report (V1.1.1)
TR 101 611-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specification for CALM Fast Services; FNTP/FSAP/IICP validation report (V1.1.1)
EG 201 383-1998 Methods for Testing and Specification (MTS); Use of SDL in ETSI Deliverables; Guidelines for Facilitating Validation and the Development of Conformance Tests (V1.1.1)
TR 103 061-1-2014 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specifications for Co-operative Awareness Messages (CAM); CAM validation report (V1.2.1)
TR 103 061-1-2012 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specification for Co-operative Awareness Messages (CAM); CAM validation report (V1.1.1)
TR 103 061-4-2012 Intelligent Transport Systems (ITS); Testing; Part 4: Conformance test specification for GeoNetworking Basic Transport Protocol (BTP); GeoNetworking BTP validation report (V1.1.1)
EG 201 383-1999 Methods for Testing and Specification (MTS); Use of SDL in ETSI Deliverables; Guidelines for Facilitating Validation and the Development of Conformance Tests (V1.1.1; Replaces ETS 300 414)
TR 103 061-2-2014 Intelligent Transport Systems (ITS); Testing; Part 2: Conformance test specifications for Decentralized Environmental Notification basic service Messages (DENM); DENM validation report (V1.2.1)
TR 103 278-2014 Core Network and Interoperability Testing (INT); IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Conformance Testing; (3GPP Release 10); Validation report (V1.1.1)
TR 103 061-2-2012 Intelligent Transport Systems (ITS); Testing; Part 2: Conformance test specification for Decentralized Environmental Notification basic Service Message (DENM); DENM validation report (V1.1.1)
TR 103 061-3-2012 Intelligent Transport Systems (ITS); Testing; Part 3: Conformance test specification for Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; GeoNetworking validation report (V1.1.1)
TR 103 061-3-2014 Intelligent Transport Systems (ITS); Testing; Part 3: Conformance test specifications for Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; GeoNetworking validation report (V1.2.1)

VN-TCVN, Tester Consistency Check

TCVN 3121-8-2003 Mortar for masonry.Test methods.Part 6: Determination of consistency retentivity

YU-JUS, Tester Consistency Check

JUS N.R4.405-1977 Electromechanical components for electronic equipment.Test methods. Test 1a and 1b:General examination

BELST, Tester Consistency Check

STB 8044-2016 System for ensuring the uniformity of measurements of the Republic of Belarus. High-voltage measuring (test) installations. Methods of verification

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Tester Consistency Check

GJB 5496.7-2005 Test method of aerial bomb Part 7:General inspection-Tightness

Agricultural Standard of the People's Republic of China, Tester Consistency Check

农业部1782号公告-13-2012 Food safety detection of genetically modified organisms and derved products.Methods for allergenicity evaluation of target protein in Brown Norway Rat
农业部2406号公告-5-2016 Food safety detection of genetically modified organisms and derived products.Test method of allergenicity of exogenous protein by ELISA with human serum

IT-UNI, Tester Consistency Check

UNI 7520-1976

US-CFR-file, Tester Consistency Check

CFR 46-160.135-15-2014 Shipping. Part160:Lifesaving equipment. Section160.135–15:Production inspections,tests, quality control, and conformance of lifeboats.
CFR 46-160.133-15-2014 Shipping. Part160:Lifesaving equipment. Section160.133–15:Production inspections,tests, quality control, and conformance of release mechanisms.
CFR 46-160.156-15-2014 Shipping. Part160:Lifesaving equipment. Section160.156–15:Production inspections,tests, quality control, and conformance of rescue boats and fast rescue boats.

ES-AENOR, Tester Consistency Check

UNE 20-606 Pt.2-1986

Standard Association of Australia （SAA）, Tester Consistency Check

AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods

Danish Standards Foundation, Tester Consistency Check

DS/EN 50291-1:2021 Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements
DS/EN 50291-1:2010 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
DS/EN 50291-1/A1:2012 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
DS/IEC 512-2:1987 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
DS/EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

PL-PKN, Tester Consistency Check

PN-EN 50291-1-2018-06/AC-2021-03 E Gas detectors -- Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements
PN T05122-1986 Electromechanical components for electronic e?uipment; basie testingprocedures and measuring methods General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests

Lithuanian Standards Office , Tester Consistency Check

LST EN 50291-1-2010 Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements
LST EN 50291-1-2010/A1-2012 Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements
LST EN 50545-1-2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels -- Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

AENOR, Tester Consistency Check

UNE-EN 50291-1:2011 Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements
UNE-EN 50291-1:2011/A1:2013 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
UNE-EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

GM North America, Tester Consistency Check

GM GMN4709-2000 Test Method for Determining Material Abrasion Resistance when Used with the Passive Occupant Detection System-A Surface (PODS-A)

KR-KS, Tester Consistency Check

KS X ISO/IEC 14362-2008 Information technology－Test methods for measuring conformance to Open Systems Interconnection(OSI) abstract data manipulation－Application Program Interface(API)(Language independent)
KS P ISO TS 17822-1-2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi
KS X ISO/IEC 10025-1-2007 Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol－Part 1：Test suite structure and test purposes fo

ZA-SANS, Tester Consistency Check

SANS 60811-1-1:2001 Common test methods for insulating and sheathing materials of electric cables and optical cables Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

Professional Standard - Agriculture, Tester Consistency Check

水产品质量安全检验手册 7.3.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 3 Determination of Preservatives in Aquatic Products 2. Qualitative Test of Prohibited Preservatives (1) Boric Acid and Borax

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Tester Consistency Check

IEEE 1802.3-2001 Conformance Test Methodology for IEEE Standards for Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications (IEEE Computer Soci