ZH
RU
ES
Electric Truck Trial
Electric Truck Trial, Total:500 items.
In the international standard classification, Electric Truck Trial involves: Fuel cells, Industrial trucks, Galvanic cells and batteries, Road vehicle systems, Diagnostic, maintenance and test equipment, Products of the chemical industry, Tyres, Commercial vehicles, Vibration and shock with respect to human beings, Graphical symbols, Storage equipment, Electric road vehicles, Passenger cars. Caravans and light trailers, Internal combustion engines, Rotating machinery, Mechanical testing, Railway rolling stock, Internal combustion engines for road vehicles, Road vehicles in general, Special purpose vehicles, Building accessories, Motor cycles and mopeds, Machine tool systems, Ground service and maintenance equipment, Sports equipment and facilities, Aids for disabled or handicapped persons, Electrical and electronic testing, Mining equipment, Rectifiers. Convertors. Stabilized power supply, Test conditions and procedures in general, Electricity. Magnetism. Electrical and magnetic measurements, Power transmission and distribution networks, Environmental protection, Lubricants, industrial oils and related products, Capacitors.
British Standards Institution (BSI), Electric Truck Trial
- BS EN 62282-4-102:2017 Fuel cell technologies. Fuel cell power systems for industrial electric trucks. Performance test methods
- BS EN 16203:2014 Safety of Industrial Trucks. Dynamic tests for verification of lateral stability. Counterbalanced Trucks
- BS EN 13059:2002+A1:2008 Safety of industrial
trucks — Test methods
for measuring vibration
- BS EN ISO 3691-2:2016 Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- BS EN ISO 3691-6:2015 Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- BS EN 16230-1:2013 Leisure karts. Safety requirements and test methods for karts
- BS ISO 18063-1:2016 Rough-terrain trucks. Visibility. Test methods and their verification. Variable-reach trucks
- BS EN 16842-5:2021 Powered industrial trucks. Visibility. Test methods and verification. Industrial variable-reach trucks greater than 10 000 kg capacity
- BS EN 16842-8:2021 Powered industrial trucks. Visibility-Test methods and verification. Stand-on counterbalance trucks up to and including 10 000 kg capacity
- BS ISO 15794:2001 Bi-directional and multi-directional fork-lift trucks - Stability tests
- BS EN 16842-6:2018 Powered industrial trucks. Visibility. Test methods and verification - Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
- BS EN 16842-2:2018 Powered industrial trucks. Visibility. Test methods and verification - Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- BS ISO 3442-2:2006 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Power-operated chucks with tongue and groove type jaws
- BS ISO 22915-10:2023 Tracked Changes. Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
- BS EN 16842-1:2018 Powered industrial trucks. Visibility. Test methods and verification - General requirements
- BS ISO 12161:2006 Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures
- BS EN 61982-2:2002 Secondary batteries for the propulsion of electric road vehicles. Dynamic discharge performance test and dynamic endurance test
- BS EN 61982-2:2003 Secondary batteries for the propulsion of electric road vehicles. Dynamic discharge performance test and dynamic endurance test
- BS ISO 13562-1:2001 Industrial variable-reach trucks. Stability tests
- BS EN 16796-2:2016 Energy efficiency of Industrial trucks. Test methods. Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
- BS EN 16842-4:2019 Powered industrial trucks. Visibility. Test methods and verification - Industrial variable reach trucks up to and including 10 000 kg capacity
- BS EN ISO 18063-2:2021 Rough-terrain trucks. Visibility test methods and their verification. Slewing rough-terrain variable-reach trucks
- BS EN 16842-10:2020 Powered industrial trucks. Visibility. Test methods and verification - Towing and Pushing tractors and Burden carrier
- 22/30417628 DC BS ISO 22915-10. Industrial trucks. Verification of stability. Part 10. Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
- BS EN 16796-1:2016 Energy efficiency of Industrial trucks. Test methods. General
- 21/30432475 DC BS EN 16307-5. Industrial trucks. Safety requirements and verification - Part 5. Supplementary requirements for pedestrian-propelled trucks
- 19/30354987 DC BS EN ISO 18063-2. Rough-terrain trucks. Visibility test methods and their verification. Part 2. Slewing trucks
- BS EN 16842-9:2019 Powered industrial trucks. Visibility. Test methods and verification - Order-picking, lateral- and front-stacking trucks with elevating operator position
- BS ISO 22915-20:2008 Industrial trucks - Verification of stability - Trucks operating with offset load, offset determined by utilisation - Stability tests
- BS EN 16796-3:2016 Energy efficiency of Industrial trucks. Test methods. Container handling lift trucks
- BS AU 234:1989 Methods of test and general requirements for road vehicle starter motors
- 19/30385972 DC BS EN 16842-5. Powered industrial trucks. Visibility. Test methods and verification. Part 5. Industrial variable-reach trucks greater than 10 000 kg capacity
- BS EN IEC 62282-4-102:2023 Tracked Changes. Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
- BS EN IEC 62282-4-101:2022 Fuel cell technologies - Fuel cell power systems for electrically powered industrial trucks. Safety
International Electrotechnical Commission (IEC), Electric Truck Trial
- IEC 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
- IEC 61982-2:2002 Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test
- IEC 62576:2009 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics
Standard Association of Australia （SAA）, Electric Truck Trial
- AS 2359.17:2008 Powered industrial trucks - Stability tests for rough terrain trucks (ISO 8379:1998, MOD)
- AS 2359.14:2005 Powered industrial trucks - Fork arms - Technical characteristics and testing
- AS 2359.14:2005(R2016) Powered industrial trucks - Fork arms - Technical characteristics and testing
- AS 2359.9:2006 Powered industrial trucks - Overhead guards - Specification and testing (ISO 6055:2004, MOD)
- AS 2359.18:2008 Powered industrial trucks - Stability tests for industrial variable-reach trucks
- AS 2359.9:1995 Powered industrial trucks part 9: High-lift rider trucks - Overhead guards - Specification and testing
- AS 2359.9:2006(R2016) Powered industrial trucks part 9: High-lift rider trucks - Overhead guards - Specification and testing
- AS ISO 13564.1:2015 Powered industrial trucks — Test methods for verification of visibility, Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
- IEC 62282-4-102:2022 RLV Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
- IEC 62282-4-102:2022 Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
- AS/NZS 3696.9:2008 Wheelchairs - Climatic tests for electric wheelchairs (ISO 7176-9:2001, MOD)
International Organization for Standardization (ISO), Electric Truck Trial
- ISO 1044:1975 Industrial trucks — Traction batteries for electric trucks — Voltages
- ISO 1044:1985 Industrial trucks — Traction batteries for electric trucks — Voltages
- ISO 18063-1:2016 Rough-terrain trucks - Visibility - Test methods and their verification - Part 1: Variable-reach trucks
- ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks
- ISO 23308-2:2020 Energy efficiency of industrial trucks — Test methods — Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks
- ISO 12161:2006 Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures
- ISO 3442-2:2005 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws
- ISO 21782-2:2019 Electrically propelled road vehicles — Test specification for electric propulsion components — Part 2: Performance testing of the motor system
- ISO 22915-10:2008 Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
- ISO 22915-10:2023 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
- ISO 13564-1:2012 Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
- ISO 21782-5:2021 Electrically propelled road vehicles — Test specification for electric propulsion components — Part 5: Operating load testing of the motor system
Society of Automotive Engineers (SAE), Electric Truck Trial
- SAE J360-2008 Truck and Bus Grade Parking Performance Test Procedure
- SAE J1713-1998 Structural Testing of Passenger Car and Truck Disc Brakes
- SAE J1713-2013 Structural Testing of Passenger Car and Truck Disc Brakes
- SAE J2675-2004 Combined Cornering and Braking Test for Truck Tires
- SAE J2429-2015 Free-Rolling Cornering Test for Truck and Bus Tires
- SAE J2429-2023 Free-Rolling Cornering Test for Truck and Bus Tires
- SAE J651-2005 Passenger Car and Light Truck Automatic Transmission and Automatic Transaxle Test Code
- SAE J843-2013 Brake System Road Test Code Passenger Car and Light-Duty Truck
- SAE J2318-2008 Air Brake Actuator Test Performance Requirements Truck and Bus
- SAE J1729-2008 Parking Brake Drawbar Pull Test Procedure Truck and Bus
- SAE J2536-2004 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Trucks, Truck-Tractors and Buses
- SAE J1469-2009 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
- SAE J702B-1976 BRAKE AND ELECTRICAL CONNECTION LOCATIONS—TRUCK-TRACTOR AND TRUCK-TRAILER
- SAE J702-2003 (R) Brake and Electrical Connection Locations - Truck-Tractor and Truck-Trailer
- SAE J982-1990 Test Code - Truck, Truck-Tractor, and Trailer Air Service Brake System Pneumatic Pressure and Time Levels
- SAE J2536-2011 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Trucks, Truck-Tractors and Buses
- SAE J2380-1998 Vibration Testing of Electric Vehicle Batteries
- SAE J1252-1981 SAE Wind Tunnel Test Procedure for Trucks and Buses
- SAE J2181-1998 Steady-State Circular Test Procedure for Trucks and Buses
- SAE J1252-2012 SAE Wind Tunnel Test Procedure for Trucks and Buses
- SAE J1626-2012 Braking, Stability, and Control Performance Test Procedures for Air-and Hydrualic-Brake-Equipped Trucks, Truck-Tractors and Buses
- SAE J1340-2011 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
- SAE J1340-1996 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
- SAE J651C-1979 PASSENGER CAR AND TRUCK AUTOMATIC TRANSMISSION TEST CODE
- SAE J1144A-1978 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE—PASSENGER CARS AND LIGHT DUTY TRUCKS
- SAE J1393-1999 On-Highway Truck Cooling Test Code
- SAE J1713-2014 Structural Testing of Passenger Car and Truck Disc Brakes
- SAE J1505-2022 Brake Force Distribution Test Procedure - Trucks and Buses
- SAE J2350-2012 Electric Blower Motor Switch Trucks, Buses, and Multipurpose Vehicles
- SAE J2350-2002 Electric Blower Motor Switch—Trucks, Buses, and Multipurpose Vehicles
- SAE J2350-1997 Electric Blower Motor SwitchTrucks, Buses, and Multipurpose Vehicles
- SAE J2377-2009 Test Procedure for Air Supply of Truck-Tractors and Towing Trucks
- SAE J2536-2023 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Trucks, Truck-Tractors, and Buses
- SAE J1462-2021 External Automatic Brake Adjuster Test Procedure - Truck and Bus
- SAE J2424-1998 Free Motion Headform Impact Tests of Heavy Truck Cab Interiors
- SAE J1144-2000 Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, and Light-Duty Trucks
- SAE J267-2007 Wheels/Rims Performance Requirements and Test Procedures Truck and Bus
- SAE J225-2022 Brake Force Distribution Field Test Procedure for Truck and Bus
- SAE J2255-1996 Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked-Equipped Truck Tractors, Buses, Trailers, and Dollies
- SAE J134B-1975 BRAKE SYSTEM ROAD TEST CODE — PASSENGER CAR AND LIGHT DUTY TRUCK — TRAILER COMBINATIONS
- SAE J201-1997 In-Service Brake Performance Test Procedure Passenger-Car and Light-Duty Truck
- SAE J1340-1990 TEST METHOD FOR MEASURING POWER CONSUMPTION OF AIR CONDITIONING AND BRAKE COMPRESSORS FOR TRUCKS AND BUSES
- SAE J1340-2023 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
- SAE J1911-2014 Test Procedure for Air Reservoir Capacity - Truck and Bus
- SAE J266-1996 Steady-State Directional Control Test Procedures for Passenger Cars and Light Trucks
- SAE J2953-2-2014 Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
- SAE J2953-4-2021 Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
- SAE J1469-1995 AIR BRAKE ACTUATOR TEST PROCEDURE, TRUCK-TRACTOR, BUS, AND TRAILERS
- SAE J1633-2000 Laboratory Speed Test Procedure for Light Truck Tires
- SAE J1633-2019 Laboratory Speed Test Procedure for Light Truck Tires
- SAE J2348-2002 Electric Windshield Washer SwitchTrucks, Buses, and Multipurpose Vehicles
- SAE J651-1996 Passenger Car and Light Truck Automatic Transmission and Automatic Transaxle Test Code
- SAE J2675-2023 Combined Cornering and Braking Test for Truck and Bus Tires
- SAE J2429-2004 Free-Rolling Cornering Test for Truck Tires
- SAE J1911-2009 Test Procedure for Air Reservoir Capacity - Truck and Bus
- SAE J134-1985 BRAKE SYSTEM ROAD TEST CODE—PASSENGER CAR AND LIGHT DUTY TRUCK-TRAILER COMBINATIONS
- SAE J134C-1979 BRAKE SYSTEM ROAD TEST CODE—PASSENGER CAR AND LIGHT DUTY TRUCK-TRAILER COMBINATIONS
- SAE J1476-2008 Parking Brake Structural Integrity Test Procedure Vehicles over 4500 kg (10,000 lb) GVWR Truck and Bus
- SAE J2349-2002 Electric Windshield Wiper SwitchTrucks, Buses, and Multipurpose Vehicles
- SAE J2349-2012 Electric Windshield Wiper Switch Trucks, Buses, and Multipurpose Vehicles
- SAE J1766-2005 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
- SAE J1462-2011 External Automatic Slack Adjuster Test Procedure Truck and Bus
- SAE J1469-2001 Air Brake Actuator Test Procedure, Truck-Tractor, Bus and Trailer
- SAE J1469-2017 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
- SAE J2394-2013 Seven Conductor Cable for ABS Power Truck and Bus
- SAE J2891-2015 Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks
- SAE J2425-2013 Steering Control Systems Laboratory Test Procedure Heavy Trucks
- SAE J328-2005 Wheels Passenger Cars and Light Truck Performance Requirements and Test Procedures
- SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
- SAE J1340-2003 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
- SAE J1766-2014 Recommended Practice for Electric, Fuel Cell and Hybrid Electric Vehicle Crash Integrity Testing
- SAE J2891-2010 Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks
SAE - SAE International, Electric Truck Trial
- SAE J360-1995 Truck and Bus Grade Parking Performance Test Procedure
- SAE J360-1988 Truck and Bus Grade Parking Performance Test Procedure
- SAE J360-1968 VEHICLE GRADE PARKING PERFORMANCE TEST CODE
- SAE J1713-2004 Structural Testing of Passenger Car and Truck Disc Brakes
- SAE J2429-1998 Free-Rolling Cornering Test for Truck Tires
- SAE J2675-2017 Combined Cornering and Braking Test for Truck and Bus Tires
- SAE J702-1985 Brake and Electrical Connection Locations - Truck-Tractor and Truck-Trailer@ Recommended Practice (May 1985)
- SAE J2536-2002 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for On-Highway Commercial Vehicles
- SAE J1252-1979 SAE Wind Tunnel Test Procedure for Trucks and Buses
- SAE J2181-2011 Steady-State Circular Test Procedure for Trucks and Buses
- SAE J2181-1993 Steady-State Circular Test Procedure for Trucks and Buses
- SAE J1340-1981 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
- SAE J651-1991 Passenger Car and Truck Automatic Transmission Test Code (January 1991)
- SAE J651-2015 Passenger Car and Light Truck Automatic Transmission and Automatic Transaxle Test Code
- SAE J1144-1976 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE - PASSENGER CARS
- SAE J1144-1994 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE—PASSENGER CARS AND LIGHT DUTY TRUCKS
- SAE J1144-1991 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE—PASSENGER CARS AND LIGHT DUTY TRUCKS
- SAE J1144-1990 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE—PASSENGER CARS AND LIGHT DUTY TRUCKS
- SAE J1144-2019 TOWED VEHICLE DRIVETRAIN TEST PROCEDURE—PASSENGER CARS AND LIGHT DUTY TRUCKS
- SAE J2377-2014 Test Procedure for Air Supply of Truck-Tractors and Towing Trucks
- SAE J2255-2019 Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked-Equipped Truck Tractors@ Buses@ Trailers@ and Dollies@ Recommended Practice
- SAE J201-1976 In-Service Brake Performance Test Procedure Passenger-Car and Light-Duty Truck
- SAE J201-1989 In-Service Brake Performance Test Procedure Passenger Car and Light-Duty Truck@ Recommended Practice
- SAE J201-2013 In-Service Brake Performance Test Procedure Passenger-Car and Light-Duty Truck
- SAE J266-2018 Steady-State Directional Control Test Procedures for Passenger Cars and Light Trucks
- SAE J3053-2015 Heavy Duty Truck and Bus Electrical Circuit Performance Requirement for 12/24 Volt Electric Starter Motors
- SAE J3053-2019 Heavy-duty truck and bus circuit performance requirements for 12/24-volt electric starter motors
- SAE J2348-1997 Electric Windshield Washer SwitchTrucks@ Buses@ and Multipurpose Vehicles
- SAE J2349-1997 Electric Windshield Wiper Switch - Trucks@ Buses@ and Multipurpose Vehicles
- SAE J1469-2019 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
- SAE J1469-1988 Air Brake Actuator Test Procedure@ Truck- Tractor@ Bus@ and Trailers@ Recommended Practice
- SAE J1469-2006 Air Brake Actuator Test Procedure@ Truck-Tractor@ Bus@ and Trailers
- SAE J1376-1997 Fuel Economy Measurement Test (Engineering Type) for Trucks and Buses
- SAE J2891-2020 Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks
American Society for Testing and Materials (ASTM), Electric Truck Trial
- ASTM D2847-99 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
- ASTM D2847-22 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
- ASTM D2847-14 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
- ASTM F1577-96 Standard Test Methods for Detention Locks for Swinging Doors
- ASTM D6202-00a Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
- ASTM D6202-01 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
- ASTM D6202-02 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
- ASTM F2663-21 Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
- ASTM D7589-15a Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
- ASTM D7589-16 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
Association Francaise de Normalisation, Electric Truck Trial
- NF H96-314*NF EN 16203:2014 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
- NF H96-316-16*NF ISO 22915-16:2015 Industrial trucks - Verification of stability - Part 16 : pedestrian propelled trucks
- NF H96-313/IN1*NF EN 13059/IN1:2008 Safety of industrial trucks - Test methods for measuring vibration
- NF H96-300-5*NF EN ISO 3691-5:2017 Industrial trucks - Safety requirements and verification - Part 5 : pedestrian-propelled trucks
- NF EN ISO 3691-5:2017 Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : chariots à conducteur à propulsion manuelle
- NF EN 16230-1/IN1:2015 Karts de loisir - Partie 1 : exigences de sécurité et méthodes d'essais relatives aux karts
- NF EN 16230-1+A1:2015 Karts de loisir - Partie 1 : exigences de sécurité et méthodes d'essais relatives aux karts
- NF H96-300-5/A1*NF EN ISO 3691-5/A1:2020 Industrial trucks - Safety requirements and verification - Part 5 : pedestrian-propelled trucks - Amendment 1
- NF EN ISO 3691-5/A1:2020 Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : chariots à conducteur à propulsion manuelle - Amendement A1
- NF H96-312-3*NF EN 16842-3:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 3 : reach trucks up to and including 10 000 kg capacity
- NF S52-521-1*NF EN 16230-1+A1:2015 Leisure karts - Part 1 : safety requirements and test methods for karts
- NF S52-521-1/IN1*NF EN 16230-1/IN1:2015 Leisure karts - Part 1 : safety requirements and test methods for karts
- NF H96-312-2*NF EN 16842-2:2018 Powered industrial trucks - Visibility - Test method and verification - Part 2 : sit-on counter balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- NF H96-312-6*NF EN 16842-6:2018 Powered industrial trucks - Visibility - Test method and verification - Part 6 : sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
- NF H96-324-2*NF EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2 : slewing rough-terrain variable-reach trucks
- NF E62-102-2*NF ISO 3442-2:2006 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2 : power operated chucks with tongue and groove type jaws
- NF H96-330-1:1998 Safety of industrial trucks. Electrical requirements. Part 1 : general requirements for battery powered trucks.
- NF R12-754*NF ISO 28580:2019 Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results
- NF H96-312-4*NF EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4 : industrial variable reach trucks up to and including 10 000 kg capacity
- NF EN 16796-3:2016 Efficacité énergétique des chariots de manutention - Méthodes d'essai - Partie 3 : chariots élévateurs porte-conteneur
- NF H96-316-10*NF ISO 22915-10:2015 Industrial trucks - Verification of stability - Part 10 : additional stability test for trucks operating in special condition of stacking with load laterally displaced by powered devices
- NF H96-312-1*NF EN 16842-1:2018 Powered industrial trucks - Visibilty - Test method and verification - Part 1 : general requirements
- NF C56-282-4-102*NF EN 62282-4-102:2017 Fuel cell technologies - Part 4-102 : fuel cell power systems for industrial electric trucks - Performance test methods
- NF EN 16796-6:2020 Efficacité énergétique des chariots de manutention - Méthodes d'essai - Partie 6 : chariot cavalier porte-conteneur
- NF E62-102-3*NF ISO 3442-3:2007 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3 : power operated chucks with serrated jaws
- NF C58-982-2:2003 Secondary batteries for the propulsion of electric road vehicles - Part 2 : dynamic discharge performance test and dynamic endurance test.
Korean Agency for Technology and Standards (KATS), Electric Truck Trial
- KS R 1119-2004(2009) Braking device dynamometer test procedure－Truck and bus
- KS R 1129-2017 Service brake road test and performance requirements-Truck and bus
- KS R 1119-2014 Braking device dynamometer test procedure－Truck and bus
- KS B ISO 1044-2014(2019) Industrial trucks — Lead-acid traction batteries for electric trucks — Preferred voltages
- KS R 1129-2017(2022) Service brake road test and performance requirements-Truck and bus
- KS R 1139-2013 Brake test method of electric vehicles
- KS R 0102-1997 INTERNAL DIMENSIONS FOR REAR BODY OF MOTOR TRUCKS
- KS R 1169-2009 Test method for automotive electric parking brake control equipments
- KS R 1134-2001 Coastdown test method of electric vehicle
- KS R 1134-2001(2021) Coastdown test method of electric vehicle
- KS R 1138-2001(2021) Climbing test method of electric vehicles
- KS M ISO 10454:2007 Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
- KS C IEC 61982-2:2003 Secondary batteries for the propulsion of electric road vehicles-Part 2:Dynamic discharge performance test and dynamic endurance test
- KS R 1138-2001 Climbing test method of electric vehicles
- KS R 1138-2001(2016) Climbing test method of electric vehicles
- KS B ISO 13564-1-2015(2020) Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
- KS I 4002-2014 Test methods for remanufactured starter motors of automobiles
- KS M ISO 10454-2007(2022) Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
- KS R 1169-2009(2019) Test method for automotive electric parking brake control equipments
- KS R ISO 12161:2008 Road vehicles－Endurance braking systems ofmotor vehicles and towed vehicles－Test procedures
- KS R 1133-2016 General rules of running test method of electric vehicles
- KS R 1133-2016(2021) General rules of running test method of electric vehicles
- KS R 1137-2001(2021) Maximum climbing test method of electric vehicles
- KS R 1137-2001(2006) Maximum climbing test method of electric vehicles
- KS B ISO 3442-2:2009 Machine tools-Dimensions and geometric tests for self-centring chucks with two-piece jaws-Part 2:Power-operated chucks with tongue and groove type jaws
- KS B ISO 3442-2:2013 Machine tools－Dimensions and geometric tests for self-centring chucks with two-piece jaws－Part 2：Power-operated chucks with tongue and groove type jaws
- KS M ISO 28580-2016(2021) Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
- KS R 1137-2001 Maximum climbing test method of electric vehicles
- KS R ISO 21782-2:2021 Electrically propelled road vehicles — Test specification for electric propulsion components — Part 2: Performance testing of the motor system
- KS B ISO 23308-2:2021 Energy efficiency of industrial trucks — Test methods —Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks
- KS C IEC 61982-3:2003 Secondary batteries for the propulsion of electric road vehicles-Part 3:Performance and life testing(Traffic compatible, urban use vehicles)
- KS M ISO 28580:2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
- KS R 1139-2006(2011) Brake test method of electric vehicles
- KS B ISO 13564-1:2015 Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
- KS R 1133-2001 General rules of running test method of electric vehicles
- KS R 5032-2015 Road vehicles — Test method of windshield wiper motors
- KS I 4036-2019 Test methods of remanufactured electric side view mirror for passenger cars
- KS I 4002-2018 Test methods of remanufactured starter motor for passenger cars
- KS R 9247-2007(2017) Electric door system used on railway rolling stock－Test methods
- KS C IEC 61982-2-2003(2013) Secondary batteries for the propulsion of electric road vehicles－Part 2：Dynamic discharge performance test and dynamic endurance test
未注明发布机构, Electric Truck Trial
- SAE J2675-201711 Combined Cornering and Braking Test for Truck Tires
- SAE J702-201301 BRAKE AND ELECTRICAL CONNECTION LOCATIONS—TRUCK-TRACTOR AND TRUCK-TRAILER
- BS ISO 18063-1:2016(2018) Rough - terrain trucks — Visibility — Test methods and their verification Part 1 : Variable - reach trucks
- BS EN 16842-9:2019(2020) Powered industrial trucks — Visibility — Test methods and verification Part 9 : Order - picking, lateral - and front - stacking trucks with elevating operator position
- SAE J1469-201903 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
German Institute for Standardization, Electric Truck Trial
- DIN 45678:1994 Mechanical vibration - Articulated trucks - Laboratory method for evaluating vehicle seat vibration
- DIN EN 16203:2014-11 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks; German version EN 16203:2014
- DIN EN 13059:2009 Safety of industrial trucks - Test methods for measuring vibration (includes Amendment A1:2008); English version of DIN EN 13059:2009-06
- DIN EN 13059:2009-06 Safety of industrial trucks - Test methods for measuring vibration; German version EN 13059:2002+A1:2008 / Note: DIN EN 13059 (2002-10) remains valid alongside this standard until 2009-12-28.
- DIN EN 16203:2014 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks; German version EN 16203:2014
- DIN EN 16842-3:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10000 kg capacity
- DIN EN 16842-3:2017 Powered industrial trucks - Visibility - Test method and verification - Part 3: Reach trucks up to and including 10000 kg; German and English version prEN 16842-3:2017
- DIN EN 16842-5:2021-04 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity; German version EN 16842-5:2021 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
- DIN EN 16230-1:2015-04 Leisure karts - Part 1: Safety requirements and test methods for karts; German version EN 16230-1:2013+A1:2014 / Note: DIN EN 16230-1 (2013-04) remains valid alongside this standard until 2015-06-30.
- DIN EN 16842-6:2019-06 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity; German version EN 16842-6:2018 / Note: Applies in conjunction with DIN EN 1684...
- DIN EN 16842-10:2020-11 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier; German version EN 16842-10:2020 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
- DIN EN 16842-2:2018-10 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity; German version EN 16842-2:2018 / Note: Applies in conjunction with DIN...
- DIN EN 16842-6:2017 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity; German and English version prEN 16842-6:2017
- DIN EN 16307-5:2013-06 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks; German version EN 16307-5:2013 / Note: Applies in conjunction with DIN EN ISO 3691-5 (2010-09).*To be replaced by DIN EN 1630...
- DIN EN 16307-5:2021-12 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian propelled trucks; German and English version prEN 16307-5:2021 / Note: Date of issue 2021-11-19*Intended as replacement for DIN EN 16307-5 (201...
- DIN EN 16842-2:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- DIN EN 16842-6:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity
- DIN EN 16842-4:2017 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10000 kg capacity; German and English version prEN 16842-4:2017
- DIN EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
- DIN EN 16842-4:2019-09 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity; German version EN 16842-4:2019
- DIN 15170:1987 Industrial trucks; trailer couplings; connecting dimensions, requirements, testing
- DIN EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
- DIN EN 16842-1:2018-10 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements; German version EN 16842-1:2018
- DIN ISO 6315:1981 Road vehicles; brake linings; seizure to ferrous mating surface due to corrosion; test procedure
- DIN EN 16796-6:2020-03 Energy efficiency of Industrial trucks - Test methods - Part 6: Container straddle carrier; German version EN 16796-6:2020
- DIN EN ISO 18063-2:2019 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing trucks (ISO/DIS 18063-2); German and English version prEN ISO 18063-2:2019
- DIN EN 16842-7:2019-06 Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer; German version EN 16842-7:2018 / Note: Applies in conjunction with...
- DIN EN 16842-8:2021-04 Powered industrial trucks - Visibility - Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity; German version EN 16842-8:2021 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
JSAE - Society of Automotive Engineers of Japan@ Inc., Electric Truck Trial
- JASO C459-2010 Truck and bus - Disc brake caliper bench test procedure
- JASO C448-1980 Disc Brake Caliper Bench Test Procedure - Passenger Car
- JASO C459-1987 Disc Brake Caliper Bench Test Procedure- Truck and Bus
- JASO C404-1999 Truck and Bus - Service Brake Road Test Procedures
- JASO C420-2005 Truck and bus - Service brake structural integrity test procedure
- JASO C421-1974 Service Brake Structural Integrity Dynamometer Test Procedure - Truck and Bus
Indonesia Standards, Electric Truck Trial
- SNI 09-1250-1989 Braking equipment for trucks, buses, towing vehicles and trailers, Running test
- SNI 09-1248-1989 Braking equipment for trucks, buses, towing vehicles and trailers, Performance test
- SNI 09-1247-1989 Braking equipment for light trucks, Performance test
RO-ASRO, Electric Truck Trial
AENOR, Electric Truck Trial
- UNE 58405:1995 INDUSTRIAL TRUCKS. LEAD-ACID TRACTION BATTERIES FOR ELECTRIC TRAUCKS. PREFERRED VOLTAGES.
- UNE-EN 16203:2014 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
- UNE-EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
- UNE-EN 16230-1:2013+A1:2015 Leisure karts - Part 1: Safety requirements and test methods for karts
- UNE-EN 16307-5:2013 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
- UNE-ISO 3442-3:2013 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws
- UNE-ISO 3442-2:2013 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws
European Committee for Standardization (CEN), Electric Truck Trial
- EN 16203:2014 Safety of Industrial Trucks - Verification of Dynamic Stability - Counterbalanced Trucks
- EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
- EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
- EN 16230-1:2013 Leisure karts - Part 1: Safety requirements and test methods for karts
- FprEN 16307-5 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
- EN 16842-2:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- EN 16842-5:2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity
- EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)
- EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
- EN 13059:2002 Safety of industrial trucks - Test methods for measuring vibration (Incorporates Amendment A1: 2008)
- EN 16796-2:2016 Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks@ towing tractors and burden-carrier trucks
- EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- EN 1175:2020 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
- EN 16842-8:2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity
- EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts
PL-PKN, Electric Truck Trial
- PN M60660-1993 Self-centring manually-operated chucks for machine tools. Acceptance test specifications (Geometrical tests)
- PN-EN 16842-8-2021-06 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
- PN-EN 16842-5-2021-06 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- PN-EN 16842-10-2021-01 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 10: Towing and Pushing tractors and Burden carrier
Guangdong Provincial Standard of the People's Republic of China, Electric Truck Trial
- DB44/T 1479-2014 Electric vehicle power battery vibration test
- DB44/T 1474-2014 Test method for starting characteristics of drive motors for electric vehicles
- DB44/T 1780-2015 Efficiency Test Method for Electric Vehicle Charger
- DB44/T 1482-2014 Test method for charging and discharging efficiency of traction batteries for electric vehicles
- DB44/T 1480-2014 Reliability test method of power battery system for electric vehicles
- DB44/T 1769-2015 Reliability test methods for electronic equipment used in electric vehicles
KR-KS, Electric Truck Trial
- KS B ISO 8379-2009 Rough terrain trucks－Stability tests
- KS I 4052-2023 Test methods for remanufactured air brake calliper of commercial vehicles
- KS C IEC 62282-4-102-2023 Fuel cell technologies — Part 4-102: Fuel cell power systems for industrial electric trucks — Performance test methods
- KS I 4002-2018(2023) Test methods of remanufactured starter motor for passenger cars
- KS R ISO 21782-2-2021 Electrically propelled road vehicles — Test specification for electric propulsion components — Part 2: Performance testing of the motor system
- KS B ISO 23308-2-2021 Energy efficiency of industrial trucks — Test methods —Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks
- KS M ISO 28580-2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
SE-SIS, Electric Truck Trial
- SIS SS-ISO 3894:1979 Road vehicles — Trucks — Wheels/rims — Test methods
- SIS SMS 2788 E-1970 Truckar och lyftvagnar. Stabilitetsprovning av h?glyftande frontlastande motviktstruckar
- SIS SMS 2797 E-1970 Truckar och lyftvagnar. Stabilitetsprovning av h?g- lyfttruckar med skjutbart lastb?rande organ och bredsp?riga st?dbenstruckar
- SIS SMS 2299-1970 Hose clips. Worm drive type. Test specijications
IN-BIS, Electric Truck Trial
Danish Standards Foundation, Electric Truck Trial
- DS/EN 13059+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
- DS/EN 1175-1+A1:2011 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
- DS/EN 16230-1:2013 Leisure karts - Part 1: Safety requirements and test methods for karts
- DS/EN 16307-5:2013 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
- DS/EN 16842-5:2021 Powered industrial trucks – Visibility – Test methods and verification – Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- DS/EN 1175-2+A1:2011 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- DS/ISO 18063-2:2021 Rough-terrain trucks – Visibility test methods and their verification – Part 2: Slewing rough-terrain variable-reach trucks
- DS/EN 1175-3+A1:2011 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
- DS/EN 16842-8:2021 Powered industrial trucks – Visibility-Test methods and verification – Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
- DS/EN 61982-2:2003 Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test
Lithuanian Standards Office , Electric Truck Trial
- LST EN 13059-2003+A1-2008 Safety of industrial trucks - Test methods for measuring vibration
- LST EN 1175-1-1998+A1-2011 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
- LST EN 16842-5-2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- LST EN 1175-2-1998+A1-2011 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- LST EN 16842-8-2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
- LST EN 1175-3-1998+A1-2011 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
Underwriters Laboratories (UL), Electric Truck Trial
- UL 583 BULLETIN-2018 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 BULLETIN-2007 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 BULLETIN-2008 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 BULLETIN-2002 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 BULLETIN-2009 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 BULLETIN-2006 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583-2022 UL Standard for Safety Electric-Battery-Powered Industrial Trucks
- UL 583 CRD-2023 UL Standard for Safety Electric-Battery-Powered Industrial Trucks - Section / Paragraph Reference: Supplement SC (New) Subject: Automatic Guided and Automated Industrial Trucks
Group Standards of the People's Republic of China, Electric Truck Trial
- T/CAAMTB 85-2022 Performance requirements and bench test method for commercial vehicle electromechanical brake caliper assembly
- T/CAMS /CICEIA78-2021 Electric vehicle powertrain test bench
- T/CEC 699-2022 Swappable pure electric heavy-duty truck battery box connector
- T/CAAMTB 21-2020 Technical requirements for vibration test of on board hydrogen supply system of fuel cell electric vehicle
- T/BJQC 2019011-2023 Testing methods for power performance of battery electric vehicles in low temperature condition
- T/BJQC 2019011-2021 Testing methods for power performance of battery electric vehicles in low temperature condition
- T/GHDQ 40-2019 Technical Conditions of Battery Electric Light Truck in Frigid Regions
- T/JSQX 0012-2022 Communication protocol for battery pack replacement of pure electric heavy-duty trucks in Jiangsu Province
- T/ZJSEE 0006-2023 Test code for 220 kV vehicle-mounted mobile substation
- T/CSAE 122-2019 Test methods for cold startperformancesof fuel cell electric vehicles under sub-zero temperature
- T/HFJX 2058-2023 Specification for inspection and test of remanufactured electric airport luggage trolley charger
- T/HFJX 2057-2023 Specification for inspection and test of DC charger for remanufactured electric flatbed vehicle
- T/CSAE 229-2021 Battery electric passenger vehicle control integrated circuit road test method for finished vehicle
- T/CSAE 230-2021 Battery electric passenger vehicle communication integrated circuit road test method for finished vehicle
- T/CAAMTB 110-2022 Energy efficiency grades and test methods for pure electric road sweepers and sweepers
- T/GHDQ 38-2019 Test methods of onboard hydrogen system of fuel cell electric vehicles in frigid regions
- T/CSAE 167-2020 Bench test methods of antilock braking for electric vehicles with regenerative braking
- T/CSAE 166-2020 Road test methods of antilock braking for electric vehicles with regenerative braking
- T/CSAE 190.3-2021 Hub electric wheel assembly for automobile——Test method
- T/BJQC 201904-2020 Performance requirements and testing methods of battery heating performance for battery electric vehicle
- T/CSAE 219-2021 Test methods of external short circuit of lithium-ion traction batteries for electric vehicles
- T/GHDQ 41-2019 Comprehensive Evaluation Index on the Performance of the Battery Electric Light Truck in Frigid Regions
Taiwan Provincial Standard of the People's Republic of China, Electric Truck Trial
Japanese Industrial Standards Committee (JISC), Electric Truck Trial
- JIS E 6004:1992 Electric rolling stock -- General rules for performance tests
- JIS D 1302:2004 Electric vehicle -- Electric motors -- Test method of maximum power
- JIS D 1303:2004 Electric vehicles -- Batteries -- Test method of charging efficiency
- JIS D 1304:2004 Electric vehicle -- Charging system -- Test method of efficiency
- JIS E 5004:1991 Control equipment for electric rolling stock -- Test methods
- JIS B 6006-2:2008 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws
- JIS B 6006-3:2008 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws
ES-UNE, Electric Truck Trial
- UNE-EN 16842-6:2020 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
- UNE-EN 16842-10:2021 Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
- UNE-EN 16842-2:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- UNE-EN 16842-5:2021 Powered industrial trucks - Visibility - test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- UNE-EN 16842-4:2019 Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity
- UNE-EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods (Endorsed by Asociación Española de Normalización in August of 2017.)
- UNE-EN 16842-1:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
- UNE-EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2023.)
- UNE-EN 16842-8:2021 Powered industrial trucks - Visibility-test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
CZ-CSN, Electric Truck Trial
Professional Standard - Railway, Electric Truck Trial
- TB/T 3346-2014 Electrical brake characteristic test methods for EMU
- TB/T 2514-2014 Resistance test methods for electrical locomotive and EMU
- TB/T 3345-2014 Starting and accelerating test methods for EMU
- TB/T 2509-2014 Traction efficiency test methods for electrical locomotive and EMU
- TB/T 2276-1991 Test method for locomotive electric drop gear
- TB/T 2515-1995 Test method for electrical braking characteristics of electric locomotives
- TB/T 3348-2014 Traction characteristics test methods for EMU
- TB/T 2519-1995 Test method for temperature rise of electric locomotive traction motor after installation
- TB/T 2580-1995 Specifications for electronically controlled train brake testing machine
- TB/T 2057-1989 DK-1 locomotive electro-pneumatic brake test specification on the test bench
- TB/T 2518-1995 Test method for excitation rate of electric locomotive traction motor
- TB/T 3347-2014 Temperature rise test methods for traction system of EMU
- TB/T 2364-1993 Test method for resistance braking performance of diesel locomotives
- TB/T 2367-1993 Test method for starting resistance of electric and diesel locomotives
- TB/T 2555-1995 Train test method for vehicle brakes
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electric Truck Trial
- GB/T 18385-2001 Electric vehicles--Power performance--Test method
- GB/T 18385-2005 Electric vehicles Power performance Test method
- GB/T 24156-2009 Electric motocycles and electric mopeds.Powder performance.Test methods
- GB/T 18388-2001 Electric vehicles--Engineering approval evaluation program
- GB/T 18388-2005 Electric vehicles-Engineering approval evaluation program
- GB/T 26991-2011 Fuel cell electric vehicles.Maximum speed test method
- GB/T 29126-2012 Fuel cell electric vehicles.Onboard hydrogen system.Test methods
- GB/T 15495-1995 Climatic tests for electric wheelchairs
- GB/T 19750-2005 Hybrid electric vehicles-Engineering approval evaluation program
- GB/T 19752-2005 Hybrid electric vehicles.Power performance.Test method
- GB/T 31970-2015 Performance requirements and bench test methods for air brake caliper assemble of automobile
- GB/T 29307-2012 The reliability test methods of drive motor system for electric vehicles
- GB/T 29307-2022 Reliability test method of drive motor system for electric vehicles
- GB/T 31486-2015 Electrical performance requirements and test methods for traction battery of electric vehicle
- GB/T 31549-2015 Performance testing method for electric bicycle tyres
- GB/T 18488.2-2015 Drive motor system for electric vehicles.Part 2:Test methods
- GB/T 31485-2015 Safety requirements and test methods for traction battery of electric vehicle
- GB/T 18488.2-2001 Test procedures of the electrical machines and controllers for electric vehicles
- GB/Z 18029.9-2021 Wheelchairs—Part 9:Climatic tests for electric wheelchairs
- GB/T 18029.9-2008 Wheelchairs.Part 9:Climatic tests for electric wheelchairs
RU-GOST R, Electric Truck Trial
- GOST R 55496-2013 Motor railway rolling stock. Methodology of dynamic-strength tests
- GOST R IEC 95-4-1993 Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy trucks
- GOST R 53805-2010 Motor vehicles. Manual slack adjusters of drum brakes for trucks and buses. Technical requirements and test methods
- GOST R 53080-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
American National Standards Institute （ANSI), Electric Truck Trial
国家市场监督管理总局、中国国家标准化管理委员会, Electric Truck Trial
- GB/T 24156-2018 Electric motorcycles and electric mopeds—Power performance—Test method
- GB/T 39132-2020 Fuel cell electric vehicle engineering approval evaluation program
CEN - European Committee for Standardization, Electric Truck Trial
- EN 16842-3:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
- EN 16842-6:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
- EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
- PREN 16842-4-2017 Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity
- PREN 16842-9-2017 Powered industrial trucks - Visibility - Test method for verification - Part 9: Order-picking@ lateral- and front-stacking trucks with elevating operator position
Professional Standard - Energy, Electric Truck Trial
Professional Standard - Automobile, Electric Truck Trial
- QC/T 791-2007 Electric motorcycles and electric mopeds-Engineering approval evaluation program
- QC/T 925-2013 Ultracapacitor electric city bus.Engineering approval evaluation program
- QC/T 225.2-1997 Test methods for starter motors for motorcycles and mopeds
US-FCR, Electric Truck Trial
- FCR NE-F-8-9T-1975 DESIGN BASIS FOR FUEL AND IRRADIATIONS EXPERIMENT RESISTANCE TO SHOCK AND VIBRATION IN TRUCK TRANSPORT
工业和信息化部, Electric Truck Trial
Hunan Provincial Standard of the People's Republic of China, Electric Truck Trial
- DB43/T 919-2014 Reliability test method of traction battery for electric vehicle
Jiangsu Provincial Standard of the People's Republic of China, Electric Truck Trial
- DB32/T 1917-2011 Radial impact test method for electric bicycle wheels
- DB32/T 2131-2012 Technical specification for electronic card system of motor vehicle environmental protection sign
VN-TCVN, Electric Truck Trial
- TCVN 7533-2005 Truck and bus tyres.Verifying tyre capabilities.Laboratory test methods
- TCVN 7450-2004 Electric bicycles.Electric motors.Technical requirements and test methods
- TCVN 4279-2-2008 Machine tools.Dimensions and geometric tests for self-centring chucks with two-piece jaws.Part 2: Power-operated chucks with tongue and groove type jaws
- TCVN 4279-3-2008 Machine tools.Dimensions and geometric tests for self-centring chucks with two-piece jaws.Part 3: Power-operated chucks with serrated jaws
IT-UNI, Electric Truck Trial
- UNI EN 16842-5-2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- UNI EN 16842-8-2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
Professional Standard - Machinery, Electric Truck Trial
YU-JUS, Electric Truck Trial
GOSTR, Electric Truck Trial
- GOST 31318-2006 Vibration. Laboratory evaluation of operator seat vibration. Industrial trucks
国家能源局, Electric Truck Trial
- NB/T 33008.1-2018 Inspection and test specifications for electric vehicle charging equipment Part 1: Off-board chargers
Military Standard of the People's Republic of China-General Armament Department, Electric Truck Trial
- GJB 59.40-1992 Armored Vehicle Test Procedures Vehicle Engine Loading Test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electric Truck Trial
- GB/T 24157-2017 Test methods of range and indication for the state of charge for electric motorcycles and electric mopeds
CU-NC, Electric Truck Trial
- NC 91-42-1986 Load Handling Equipment Lift-Trucks. Testing Methods
CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Electric Truck Trial
European Committee for Electrotechnical Standardization（CENELEC）, Electric Truck Trial
- EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
- EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
- EN 62576:2010 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics
CENELEC - European Committee for Electrotechnical Standardization, Electric Truck Trial
- EN 61982-2:2002 Secondary batteries for the propulsion of electric road vehicles Part 2: Dynamic discharge performance test and dynamic endurance test
Anhui Provincial Standard of the People's Republic of China, Electric Truck Trial
- DB34/T 2436-2015 Unified standardization of card swiping services for electric vehicle charging piles in public areas
National Metrological Verification Regulations of the People's Republic of China, Electric Truck Trial
国家铁路局, Electric Truck Trial