ZH
KR
JP
ES
RU
DEHold pressure
Hold pressure, Total:131 items.
In the international standard classification, Hold pressure involves: Installations in buildings, Sewing machines and other equipment for the clothing industry, Industrial automation systems, Iron and steel products, Cases. Boxes. Crates, Electrical accessories, Food products in general, Non-ferrous metals, Insulation, Quality, Fluid storage devices, Power transmission and distribution networks, Explosion protection, Hand-held tools, Protection against excessive pressure, Valves, Aircraft and space vehicles in general, Switchgear and controlgear, Burners. Boilers, Bearings, Rotating machinery, Adhesives, Resistors, Television and radio broadcasting, Transformers. Reactors, Telecommunication systems, Electronic tubes, Solar energy engineering.
General Motors Corporation (GM), Hold pressure
- GM 9986134-1998 Adhesive, Retaining Rubber Parts [Replaced: GMNA 9985262, GMNA 9985262]
Professional Standard - Urban Construction, Hold pressure
- CJ/T 456-2014 Boosting pressure water supply equipment with pneumatic tank
National Association of Pipe Fabricators (NAPF), Hold pressure
- PFI ES-26-2005 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
- PFI ES-25-2002 Random Radiography of Pressure Retaining Girth Butt Welds
- PFI ES-25-2006 Random Radiography of Pressure Retaining Girth Butt Welds
中国石油天然气总公司, Hold pressure
- SY/T 6175-1995 Physical property analysis method of full-diameter core under pressure
Professional Standard - Light Industry, Hold pressure
- QB/T 5241-2018 Footwear machines.PVC Surface material holding pressure forming machine
Group Standards of the People's Republic of China, Hold pressure
- T/QGCML 1521-2023 Specification for automatic tire pressure maintaining system of gantry cranes
- T/QGCML 2133-2023 Environmentally friendly pressure-resistant corrugated boxes
- T/LZNCPXH 001-2020 Geographical indication protected product Baoning pressed wine
- T/WLJC 28-2020 Environment-friendly spray guns
- T/CEEIA 388-2019 Technical specification of Over-voltage or under-voltage protective device
- T/GDMES 0022-2020 Low voltage circuit-breaker for fault neutral line and default phase protection
- T/ZZB 2747-2022 Stamped cages for tapered rolling bearing
- T/CEC 346-2020 Testing specification for harmonic overvoltage protection device
- T/CEC 345-2020 Technical Specifications for Harmonic Overvoltage Protection Devices
- T/FSAS 50-2020 Self-recovery overvoltage and undervoltage protection lighting distribution box
IN-BIS, Hold pressure
- IS 1970 Pt.2-1979 Specification for Manual Compression Knapsack Sprayers Part Ⅱ Pressure Maintaining Type
- IS 2870-1977 Technical Specifications for Pressure Maintained Compression Knapsack Sprayer Booster Pumps
American Society for Testing and Materials (ASTM), Hold pressure
- ASTM A395/A395M-99(2014) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
- ASTM A395/A395M-99(2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
- ASTM A990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
- ASTM A990-00 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosion Service
- ASTM A990-00e1 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
- ASTM A990/A990M-11e01 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
- ASTM A990/A990M-14 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
- ASTM A990/A990M-14a Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
YU-JUS, Hold pressure
- JUS N.B2.745-1993 Low voltage electrical installations - Protection for safety - Protection against overvoltages - Protection against overvoltages of atmospheric origin or due to switching
American Society of Mechanical Engineers (ASME), Hold pressure
- ASME SEC XI D1 NMA APP M-2002 Appendix M Applying Mathematical Modeling to Ultrasonic Examination of Pressure Retaining Components
- ASME SEC III D1 NH-7000-2001 Article NH-7000 Overpressure Protection
- ASME SEC III D2 CC-7000-2001 Article CC-7000 Overpressure Protection
- ASME 2222-2-2001 Precipitation-Hardening Nickel Alloy (UNS N07718) Used as Pressure Retaining Component Material Section VIII, Divisions 1 and 2
- ASME 2343-2001 Seal Welding of Pressure Retaining Handhole and Inspection Plugs or Fittings Secured by Physical Means After the Hydrostatic Test Section I; ANNULLED: SUPP 6
- ASME N-533-1-2001 Alternative Requirements for VT-2 Visual Examination of Class 1, 2, and 3 Insulated Pressure-Retaining Bolted Connections Section XI, Division 1
- ASME N-547-2001 Alternative Examination Requirements for Pressure Retaining Bolting of Control Rod Drive (CRD) Housings Section XI, Division 1 ANNULLED
- ASME N-617-2001 Alternative Examination Distribution Requirements for Table IWC-2500-1, Examination Category C-G, Pressure Retaining Welds in Pumps and Valves Section XI, Division 1
- ASME N-629-2001 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Section XI, Division 1; SUPP 6 R(2002)
Canadian Standards Association (CSA), Hold pressure
NEMA - National Electrical Manufacturers Association, Hold pressure
RU-GOST R, Hold pressure
British Standards Institution (BSI), Hold pressure
National Electrical Manufacturers Association（NEMA), Hold pressure
Korean Agency for Technology and Standards (KATS), Hold pressure
RO-ASRO, Hold pressure
- STAS CEI 549-1992 High-voltage fuses for the external protection of shut power capacitors
- STAS 4173/1-1991 LOW VOI.TAGE FUSF.S General requirements
- STAS 3999-1975 OVER-VOLTAGK PROTIlCTIVR DEVICKS Classificaliou and lenninology
- STAS 4173/2-1991 LOW VOLTA GE FUSES Supplemcntary requirements lor fuses for industrial purposes
Standard Association of Australia （SAA）, Hold pressure
- AS 3920.1:1993 Assurance of product quality - Pressure equipment manufacture
BE-NBN, Hold pressure
SE-SIS, Hold pressure
- SIS SEN 27 08 22-1973 Voltage transformers. Additional requirements for single-phase protective voltage transformers
AENOR, Hold pressure
CZ-CSN, Hold pressure
- CSN 38 0810-1986 Overvoltage protection of electric equipment
- CSN ON 73 6223-1966 Voltage protection, voltage protection on bridges and bridges above the track network against harmful contact
Association Francaise de Normalisation, Hold pressure
German Institute for Standardization, Hold pressure
PL-PKN, Hold pressure
- PN E05009-43-1991 Electrical installations of buildings Protection for safety Protection against overcurrent
- PN E05009-45-1992 Electrical installations of buildings Protection for safety Protection against undervoltage
- PN E05009-473-1991 Electrical installations of buildings Protection of safety Measures of protection against overcurrent
ES-AENOR, Hold pressure
IET - Institution of Engineering and Technology, Hold pressure
U.S. Military Regulations and Norms, Hold pressure
United States Navy, Hold pressure
Professional Standard - Machinery, Hold pressure
- JB/T 12762-2015 Overvoltage or undervoltage protective device with auto-reclosing function
CH-SNV, Hold pressure
HU-MSZT, Hold pressure
- MSZ 4814/4-1979 Inflatable and explosion-proof protection are used in tram production. Overpressure protection
- MSZ 806/3-1968 The degree of protection of power products and the degree of protection of transformers
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hold pressure
- GB/T 43619-2023 Overpressure protection safety device controlled safety pressure relief system
- GB/T 30775-2014 Pressure sensitive adhesive tapes of PE protective film
- GB/T 28268-2012 Rolling bearings.Specifications of pressed cages
- GB 16895.12-2001 Electrical installations of buildings Part 4: Protection for safety Chapter 44: Protection against overvoltages Section 443: Protection against overvoltages of atmospheric origin or due to switching
Professional Standard - Electricity, Hold pressure
- DL/T 294.3-2019 Generator demagnetization and rotor overvoltage protection device technical requirements part 3 rotor overvoltage protection
American National Standards Institute （ANSI), Hold pressure
- CSA N285 Series-2017 N285.0-17/N285.6 SERIES-17 - General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants
- ANSI/SCTE 129-2007 Drop Passives: Bonding Blocks (Without Surge Protection)
Xinjiang Provincial Standard of the People's Republic of China, Hold pressure
Society of Automotive Engineers (SAE), Hold pressure
国家市场监督管理总局、中国国家标准化管理委员会, Hold pressure
- GB/T 36588-2018 Safety devices for protection against excessive pressure—Common data
SAE - SAE International, Hold pressure
International Electrotechnical Commission (IEC), Hold pressure
- IEC 61173:1992 Overvoltage protection for photovoltaic (PV) power generating systems; guide
- IEC 60282-1:2020 High-voltage fuses - Part 1: Current-limiting fuses
CENELEC - European Committee for Electrotechnical Standardization, Hold pressure
KR-KS, Hold pressure
TH-TISI, Hold pressure
Institute of Electrical and Electronics Engineers (IEEE), Hold pressure
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Hold pressure
Danish Standards Foundation, Hold pressure
- DS/HD 384.4.442 S1:1998 Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against faults between high-voltage systems and earth
VDE - VDE Verlag GmbH@ Berlin@ Germany, Hold pressure
National Aeronautics and Space Administration (NASA), Hold pressure
US-FCR, Hold pressure
Professional Standard - Electron, Hold pressure
- SJ 20476-1995 General specification for gas discharge tubes for overvoltage protection
VDI - Verein Deutscher Ingenieure, Hold pressure
International Organization for Standardization (ISO), Hold pressure
- ISO 4126-4:2004 Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves