ZH
RU
ES

DC Contactor Specifications

DC Contactor Specifications, Total:362 items.

In the international standard classification, DC Contactor Specifications involves: Components and accessories for telecommunications equipment, Aerospace electric equipment and systems, Switchgear and controlgear, Electrical accessories, Electromechanical components for electronic and telecommunications equipment, Electric road vehicles, Microbiology, Rectifiers. Convertors. Stabilized power supply, Electricity. Magnetism. Electrical and magnetic measurements, Linear and angular measurements, Pipeline components and pipelines, Conducting materials, Resistors, Power transmission and distribution networks, Electric filters, Road vehicle systems, Railway rolling stock, Shipbuilding and marine structures in general, On-board equipment and instruments, Iron and steel products, Materials and articles in contact with foodstuffs, Kitchen equipment, Solar energy engineering, Fasteners, Electronic display devices, Vocabularies, Capacitors, Aerospace fluid systems and components, Radiocommunications, Fluid power systems, Fibre optic communications.

European Committee for Electrotechnical Standardization（CENELEC）, DC Contactor Specifications

EN 175201-804:1999 Detail Specification: Circular Connectors - Round Contacts, Size Diameter 1,6 mm, Threaded Coupling
EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
EN 61076-4-104:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 4-104: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Modular Connectors, Basic Grid of 2,0 mm, with Terminations on a Mu
EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
EN 175101-802:1999 Detail Specification: Two-Part Connectors for Printed Boards for High Number of Contracts with Basic Grid of 2,54 mm on 3 or 4 Rows
EN 61076-4-103:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103: Printed Board Connectors with Assesed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm
EN 61076-4:1996 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification Printed Board Connectors
EN 61076-4-107:2001 Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification for Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with Solder and Press-in Terminations for Printed Boards, Fr
EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
EN 61076-4-102:1997 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data Applications Part 4: Printed Board Connectors Section 102: Detail Specification for Two-Part Single-Pole Connectors, for Multiple Uses on Plug-In Unit
EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
EN 50109-2-1:1995 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-1: Particular Requirements for Radio Frequency Connectors and Concentric Contacts - Open Throat Tools with Fixed Die

Association Francaise de Normalisation, DC Contactor Specifications

NF C83-201-804*NF EN 175201-804:2014 Détail specification : circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
NF L54-555:1979 Connecteurs d'aérodrome avec contacts mâles de diamètres 11 mm - 28 volts - Tension continue
NF EN 175201-804:2014 Spécification particulière : connecteurs circulaires - Contacts ronds, de diamètre 1,6 mm, couplage fileté
NF EN 2349-306:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 306 : surcharges courant continu et alternatif
NF UTE C93-422:1977 Composants électroniques - Organes de raccordement connecteurs cylindriques multicontacts - Recueil de spécifications particulières.
NF C63-396-3*NF EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3 : dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
NF C99-133-1*NF EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1 : requirements for measuring instruments
NF EN ISO 12179:2022 Spécification géométrique des produits (GPS) - États de surface : méthode du profil - Étalonnage des instruments à contact (palpeur)
NF EN ISO 3274:1998 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Caractéristiques nominales des appareils à contact (palpeur)
NF EN 60512-2-2:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2 : essais de continuité électrique et de résistance de contact Essai 2b : résistance de contact - Méthode du courant d'essai spécifié
NF C93-406-4-104*NF EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104 : printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
NF C93-406-4-103*NF EN 61076-4-103:1999 Connecxtors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103 : printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm.
NF EN 4626-002:2008 Série aérospatiale - Connecteurs, optique, rectangulaire, à contacts multiples, rackables, cavité Quadrax, férule diamètre 2,5 mm - Température d'utilisation - 65 oC à 125 oC (selon câble) - Contacts affleurants - Partie 002 : spécification ...
NF EN 61076-3-120:2017 Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-120 : connecteurs rectangulaires - Spécification particulière pour connecteurs de puissance démontables à encliquetage pour une tension continue assignée de 250 V et un...
NF C93-406-3-100*NF EN 61076-3-100:2000 Connectors for use in d.c., low frequencey analogue and digital high speed data applications - Part 3-100 : rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov
NF C93-403-101*NF EN 61076-3-101:1998 Connectors with assessed quality, for use in D.C. Low-frequency analogue and in digital high-speed data applications. Part 3 : rectangular connectors. Section 101 : detail specification for a range of shielded connectors with trapezoidal shaped shells and
NF C93-406-3:2000 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3 : rectangular connectors with assessed quality - Sectional specification.
NF E05-031-604*NF EN ISO 25178-604:2013 Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments
NF C93-406-4*NF EN 61076-4:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4 : sectionnal specification - Printed board connectors
NF C93-406-1:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.
NF UTE C93-423:1977 Composants électroniques - Organes de raccordement connecteurs multicontacts encartables et enfichables pour cartes imprimées double-face au pas de 2,54 mm type HE9 - Recueil de spécification de particulières.
NF C93-406-3-001:2000 Connectors for use in d.c., low-frequency ananlogue and digital high-speed data applications - Part 3-001 : rectangular connectors with assessed quality - Blank detail specification.
NF C83-401-802*NF EN 175101-802:2002 Detail specification : two-part connectors for printed board for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
NF E31-520*NF EN 1596:1998 Specification for dedicated liquefied petroleum gas appliances. Mobile and portable non-domestic forced convection direct fired air heaters.
NF UTE C93-424:1981 Composants électroniques - Organes de raccordement - Connecteurs multicontacts pour cartes imprimées enfichables type A et leurs embases correspondantes au pas de 1,27 mm type HE 8 - Recueil des spécifications particulières.
NF EN 1596:1998 Spécifications pour les appareils fonctionnant exclusivement aux gaz de pétrole liquéfiés - Générateurs d'air chaud à gaz, non domestiques, à chauffage direct et convection forcée, mobiles et portatifs.
NF C93-406-1:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification.
NF C93-406-5*NF EN 61076-5:2002 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification
NF C93-406-001*NF EN 61076-4-001:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.

United States Navy, DC Contactor Specifications

NAVY QPL-2212-QPD-2012 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-QPD-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-QPD-2011 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2012 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices
NAVY QPL-2212-2013 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices

American National Standards Institute （ANSI), DC Contactor Specifications

ANSI/SCTE 103-2012 Test Method for DC Contact Resistance, Drop cable to ôF connectors and F 81 Barrels

German Institute for Standardization, DC Contactor Specifications

DIN EN 175201-804:2000-09 Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling; German version EN 17201-804:1999
DIN 43620-4:1981 Low-voltage high-rupturing-capacity fuses with blade contacts 500 and 660 V a.c. and 440 d.c.; replacement handle for the sizes 00 up to 3; dimensions of the engaging part
DIN EN ISO 12179:2023-04 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021); German version EN ISO 12179:2022
DIN 89266:1993 Double-pole cable couplings with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56
DIN EN 2349-306:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
DIN EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
DIN EN 175201-804:2000 Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling; German version EN 17201-804:1999
DIN EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
DIN 49441-3:1989-12 Two-pole plugs with earthing contact rated for 10 A 250 V a.c., 16 A 250 V d.c.; gauges for checking the outside diameter of plugs; test apparatus
DIN EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers (IEC 62196-3:2014)
DIN 49441-3:1989 Two-pole plugs with earthing contact rated for 10 A 250 V a.c., 16 A 250 V d.c.; gauges for checking the outside diameter of plugs; test apparatus
DIN EN 61076-3-120:2017 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016); Germa
DIN EN 61076-4-104:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
DIN EN ISO 25178-601:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023); German and English version prEN ISO 25178-601:2023 / Note: Date of issue 2023-10-06*Inten...
DIN EN 175101-802:2000-09 Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; German version EN 175101-802:1999
DIN EN 60512-2-2:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003 / Note: DIN...
DIN EN 3155-074:2010 Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard; German and English version EN 3155-074:2009
DIN EN 3155-075:2010 Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard; German and English version EN 3155-075:2009
DIN EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments (IEC 61786-1:2013); German version EN 61786-1:2014
DIN EN 61076-4-105:1999-02 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a w...
DIN EN 175101-802:2000 Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; German version EN 175101-802:1999
DIN EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
DIN EN 4640-001:2009-09 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification; German and English version EN 4640-001:2009
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN 61076-4-105:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
DIN EN ISO 25178-605:2014-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in u
DIN EN 61076-4-103:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-10
DIN EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German vers
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN ISO 20401:2007-07 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005)
DIN EN 61076-3-101:1998-05 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells a...
DIN EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Generic specification (IEC 61076-4:1995); German version EN 61076-4:1996
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN 61076-3-101 Berichtigung 1:2012-07 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells...
DIN EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019)
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010); German version EN ISO 25178-602:2010
DIN EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
DIN EN 61076-3-100:2000-10 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov...
DIN EN 61076-7:2001-06 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German v...
DIN EN 61076-5:2002 Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001
DIN EN ISO 25178-602:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO/DIS 25178-602:2023); German and English version prEN ISO 25178-602:2023 / Note: Date of ...
DIN EN ISO 25178-604:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO/DIS 25178-604:2023); German and English version prEN ISO 25178-604:2023 / Note:...
DIN EN 61076-4-102:1997-10 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-i...

AR-IRAM, DC Contactor Specifications

IRAM 6572-1958

未注明发布机构, DC Contactor Specifications

GJB 9287-2017 Specification for marine AC medium voltage contactors and contactor-based motor starters
BS EN ISO 3274:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Nominal characteristics of contact (stylus) instruments —
BS 2G 202:1988(1999) Specification for Design and performance requirements for airframe - fit electrical connectors for D.C. and low frequency A.C. applications
BS 4941-1:1979 Specificationfor Motor starters for voltages up to and includingIOOOVA.C. and 1200VD.C. Part1 . Direct - on - line (fullvoltage) A.C. starters

ES-UNE, DC Contactor Specifications

UNE-EN 175201-804:1999 Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling (Endorsed by AENOR in June of 2000.)
UNE-EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c. (Endorsed by AENOR in March of 2007.)
UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
UNE-EN IEC 62196-3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
UNE-EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...
UNE-EN 175301-803:2006 Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable (Endorsed by AENOR in December of 2006.)
UNE-EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in ...
UNE-EN 175101-802:1999 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows (Endorsed by AENOR in June of 2000.)
UNE-EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. (Endorsed...
UNE-EN 61076-3-120:2016 Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And rated current of 30 a (Endorsed by Asociación E...
UNE-EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on ...
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 61076-5:2001 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 5: In-line sockets with assessed quality - Sectional Specification (Endorsed by AENOR in March of 2002.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN 131701:1997 BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS A POLYCARBONATE FILM DIELECTRIC. ASSESSMENT LEVEL E (Endorsed by AENOR in June of 1998.)
UNE-EN 131702:1997 BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS AND A POLYCARBONATE FIL DIELECTRIC. ASSESSMENT LEVEL EZ (Endorsed by AENOR in June of 1998.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications -- Part 4: Printed board connectors -- Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plu...
UNE-EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-rem...

British Standards Institution (BSI), DC Contactor Specifications

BS EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Overload d.c and a.c
BS EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
BS 5424-3:1988 Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.. Additional requirements for contactors subject to certification
BS EN 61076-3-120:2016 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS PD IEC/TR 62001-1:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview
BS PD IEC/TR 62001-4:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
BS PD IEC/TR 62001-2:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Performance
BS PD IEC/TR 62001-3:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Modelling
PD IEC TR 62001-1:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview
PD IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
PD IEC/TR 62001-2:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Performance
PD IEC/TR 62001-3:2016 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Modelling
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
BS EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applicatio...
20/30397768 DC BS EN ISO 12179. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS PD IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Equipment
BS EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where…
BS EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Examination of dimensions and mass
BS EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
18/30356862 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
19/30395303 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicle couplers
BS 9522 N0001:1982 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
BS EN 60947-5-6:2001 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. DC interface for proximity sensors and switching amplifiers (NAMUR). DC interface for proximity sensors and switching amplifiers (NAMUR)
BS 2G 202:1988 Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
PD IEC TR 62001-5:2021 High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. AC side harmonics and appropriate harmonic limits for HVDC systems with voltage sourced converters (VSC)
BS EN 61076-3-100:2004 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications. Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon cont
BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100:Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. Cable to board conn...
BS EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectang
BS EN 61076-3-103:2004 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used
BS EN 4531-002:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
BS EN 4531-002:2008 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Specification of performance and contact arrangements
BS EN 4531-002:2016 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
BS EN 4830-001:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Technical specification
BS EN 4830-002:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Specification of performance
BS 9522 N0003:1990 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed
BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
19/30377490 DC BS EN 62196-6. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 6. Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment where protecti...
BS ISO 9060:2018 Solar energy. Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shield...
BS EN 4645-002:2010 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Specification of performance and contact arrangements
BS EN 4645-002:2009 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Specification of performance and contact arrangements
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rect...
BS EN 60603-7-82:2016 Connectors for electronic equipment. Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
PD IEC/TS 62661-2-1:2013 Optical backplanes. Product specification. Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
BS EN 61076-4:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Sectional specification. Printed board connectors
BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
PD IEC TS 62196-4:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications
19/30390157 DC BS EN IEC 61076-2-115. Connectors for electrical and electronic equipment. Product requirements. Part 2-115. Circular connectors. Detail specification for 12P connectors with 2 A rated current signal and metal housing circular connectors with straight ...
BS EN 4645-001:2010 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Technical specification
BS EN 4640-001:2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Technical specification
BS 88 Sec.2.2:1988 Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (fuses mainly for industrial application). Additional requirements for fuses with fuse-links for bolted connections
BS EN 61076-4-001:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification
BS 9524:1984 Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment levels
BS 9522:1990 Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications. Full, basic and full plus airframe assessment levels
BS EN 61076-5:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification
19/30397550 DC BS EN IEC 61557-17. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 17. Non-contact voltage indicators
BS 9523:1984 Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications - Full and basic assessment levels
BS EN 62319-1-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application
BS EN 62319-1-1:2006 Polymeric thermistors. Directly heated positive step function temperature coefficient. Blank detail specification. Current limiting application
BS QC 300500:1989 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polycarbonate film dielectric d.c. capacitors
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-cent...
BS EN 61076-3-104:2003 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up

ES-AENOR, DC Contactor Specifications

PL-PKN, DC Contactor Specifications

PN T80003-1967 Electronic e?uipment Fixed paper capacitors ?or direc? current General speci?ication
PN E06121-1974 D. C. High-speed circuit-breakers tor traction use General specification and tests
PN E88604-1988 Electrical relays Endurance tests for electrical relay contacts Specification for the charakteristics of test equipment

NEMA - National Electrical Manufacturers Association, DC Contactor Specifications

NEMA ICS 2-1993 Industrial Control and Systems Controllers@ Contactors@ and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC
NEMA ICS 2.8-1996 CONTROLLERS@ CONTACTORS@ AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC@ PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT (***ICS 2.8 was Incorporated into ICS 2***)
NEMA ICS 2 PART 8-1998 Industrial Control and Systems Controllers@ Contactors@ and Overload Relays Rated Not More Than 2000 Volts Ac or 750 Volts DC Part 8: Disconnect Devices for Use in Industrial Control Equipment (S/S by ICS 2)

Danish Standards Foundation, DC Contactor Specifications

DS/EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
DS/EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
DS/EN 61076-4-105:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
DS/EN 61076-4-104:2000 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on mul
DS/EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
DS/EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
DS/EN 175101-820:2001 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
DS/EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
DS/EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
DS/EN 61076-4-001:1997 Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
DS/EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
DS/EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
DS/EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
DS/EN 61076-4-102:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in

Lithuanian Standards Office , DC Contactor Specifications

LST EN 2349-306-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
LST EN 61076-4-105-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide r
LST EN 61076-4-101-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 101: Detail specification for two-part connector modules having a basic grid of 2, 0 mm for pr
LST EN 61076-4-103-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103: Printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103
LST EN 61076-4-100-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 100: Detail specification for two-part connector modules having a grid of 2, 5 mm (0,098 in) f
LST EN 61076-4-104-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104: Printed boards connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
LST EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
LST EN 175101-802-2002 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2, 54 mm on 3 or 4 rows
LST EN 61076-4-2001 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications. Part 4: Sectional specification. Printed board connectors (IEC 61076-4:1995)
LST EN 4165-002-2015 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
LST EN 61076-3-100-2001 Connectors for use in d.c., low- frequency analogue and digital high speed data applications. Part 3-100: Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
LST EN 61076-7-2002 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification (IEC 61076-7:2000)
LST EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
LST EN 61076-3-101-2001 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications. Part 3: Rectangular connectors. Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and n

U.S. Air Force, DC Contactor Specifications

AIR FORCE MIL-DTL-6162 C-2000 GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT, GENERAL SPECIFICATION FOR [Use In Lieu Of: AIR FORCE MIL-G-006162 A]

International Electrotechnical Commission (IEC), DC Contactor Specifications

IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle c
IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
IEC TR 62001-1:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview
IEC TR 62001-3:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: Modelling
IEC TR 62001-2:2016 High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 2: Performance
IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an
IEC 61557-17:2021 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 17: Non-contact AC voltage indicato
IEC 61076-3-100:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
IEC 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
IEC 61076-3-101:1997/COR1:2010 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells an
IEC 61076-4-105:1995 Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
IEC 61076-2:1998 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification
IEC 61076-3:1999 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification
IEC 61076-4-100:1994 Connectors with assessed quality for use in d.c. and low frequency analogue applications and in digital applications with high speed data rates - Part 4: Printed board connectors; section 100: Detail specification for two-part connector modules having a g
IEC 60603-13:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displ
IEC 61076-4-101:1995 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high speed data applications - Part 4: Printed boards connectors - Section 101: Detail specification for two-part connector modules having a basic grid of 2,0 mm for p
IEC TS 62196-4:2022 Plugs, socket-outlets, vehicle connectors and vehicles inlet - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-t
IEC TS 62661-2-1:2013 Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors
IEC 61076-1/COR1:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
IEC 61076-1:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
IEC 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification

American Society for Testing and Materials (ASTM), DC Contactor Specifications

ASTM F813-07 Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
ASTM F813-07(2012) Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
ASTM B888-12 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM B888/B888M-17 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM F2045-00(2018)e1 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
ASTM A844/A844M-09(2015) Standard Specification for Steel Plates, 9&x2009;%&x2009; Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
ASTM F959-15 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM F959-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM F959-07a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM F1844-97(2002) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM F1844-97 Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM F1844-97(2008) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM F1844-97(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM F2437/F2437M-17 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, DC Contactor Specifications

PREN 2349-306-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 306: Overload D.C. and A.C. (Edition P 1)

Standard Association of Australia （SAA）, DC Contactor Specifications

AS/NZS IEC 62196.3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles, Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers

CENELEC - European Committee for Electrotechnical Standardization, DC Contactor Specifications

EN 175301-801:1999 Detail Specification: High Density Rectangular Connectors@ Round Removable Crimp Contacts

Professional Standard - Commodity Inspection, DC Contactor Specifications

SN/T 1431.6-2012 Rules for the inspection of low-voltage appliances for import and export.Part 6:Energy efficiency of AC contactor

Korean Agency for Technology and Standards (KATS), DC Contactor Specifications

KS R IEC 62196-3-2017(2022) Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
KS B ISO 12179-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS R IEC 62196-3:2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
KS C IEC 60384-13:2018 Fixed capacitors for use in electronic equipment — Part 13: Sectional specification — Fixed polypropylene film dielectric metal foil d.c. capacitors
KS C IEC 60384-13-2023 Fixed capacitors for use in electronic equipment Part 13: Fixed polypropylene film dielectric metal foil DC capacitors in segmented specifications

AENOR, DC Contactor Specifications

UNE-EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
UNE-EN 61076-4:1997 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS.
UNE-EN 61076-3-101:1999 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND N
UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
UNE-EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments. (ISO 12179:2000)
UNE-EN ISO 3274:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
UNE-EN 61076-4-001:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
UNE-EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification.
UNE-EN ISO 25178-602:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)

International Organization for Standardization (ISO), DC Contactor Specifications

ISO/CD 25178-601 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO/CD 25178-602 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO/CD 25178-605 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 20401:2017 Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors

Institute of Electrical and Electronics Engineers (IEEE), DC Contactor Specifications

IEEE P1627/D1.5, March 2012 IEEE Draft Standard for Grounding Practices for dc Electrification Overhead Contact Systems, Including Application of Lightning Arresters, for Transit Systems

CU-NC, DC Contactor Specifications

NC 32-25-1986 Color Industry. Indirect Printing Inks for Tinplate Vessels. Quality Specifications

Defense Logistics Agency, DC Contactor Specifications

DLA QPL-25-74-2004 CAPACITORS, FIXED, PAPER OR PLASTIC DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
DLA QPL-25955-8-2006 CONNECTORS, ELECTRICAL, ENVIRONMENTAL RESISTING, MINIATURE, WITH SNAP-IN CONTACTS
DLA QPL-62-86-2006 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED) GENERAL SPECIFICATION FOR
DLA A-A-55528 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL. PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SCREWLOCK
DLA A-A-55531 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, RECEPTACLE, FEMALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY COVER, SCREWLOCK
DLA QPL-83421-58-2005 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-C-28777 A NOTICE 1-2003 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR
DLA MIL-C-28777 A SUPP 1A-1985 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR
DLA MIL-C-28777 A-1978 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR
DLA MIL-C-18312 F VALID NOTICE 1-2007 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
DLA MIL-C-18312 F-2001 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
DLA MIL-DTL-83733 E-2006 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
DLA QPL-11693-52-2006 CAPACITORS, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-C-25 E-2004 CAPACITORS, FIXED, PAPER OR PLASTIC DIELECTRIC, DIRECT CURRENT, (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR [Use In Lieu Of: DLA MIL-C-0025 B (1)]
DLA QPL-39022-61-2005 CAPACITORS, FIXED, METALLIZED, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC, DIRECT AND ALTERNATING CURRENT (HERMETICALLY SEALED IN METAL OR CERAMIC CASES), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA QPL-38999-99-2006 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR

Professional Standard - Electron, DC Contactor Specifications

SJ 51438/4-1995 Connectors,plug right angle type PM156,for printed circuit(1.905mm spacing),detail specification for
SJ/T 11309-2005 Connectors for use in d.c,low frequency analogue and digital high speed data applications-part 4-104: printed board connecyors with assessed quality-detail specification for two-part modular connectors,basic grid of 2.0mm,with terminations on a multiple g
SJ/T 11306-2005 Connectors with assessed quality for DC/low frequency analogue and digital high speed data applications Part 4: Sectional specifications for printed board connectors
SJ/T 11307-2005 Connectors with assessed quality, for use in d.c,low- frequency analogue and in digital high speed data applications-part 4: Printed board connecyors-Section 001:Blank detail specificationo

National Electrical Manufacturers Association（NEMA), DC Contactor Specifications

NEMA ICS 2 PART 8-1996 CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC, PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT
NEMA ICS 2.9-2002 Industrial Automation Control Products and Systems: Starters, Contactors, and Overload Relays Rated not more than 2000 Volts AC or 750 Volts DC - Part 9 AC Vacuum-Break Magnetic Controllers Rated 1500 Volts AC
NEMA ICS 2 PART 9-2002 Industrial Automation Control Products and Systems: Starters, Contactors, and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC - Part 9 - AC Vacumm-Break Magnetic Controllers Rated 1500 Volts AC

European Committee for Standardization (CEN), DC Contactor Specifications

EN 3155-075:2009 Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard
EN 4531-002:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
EN 4830-001:2015 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4639-10X contacts - Part 001: Technical specification
EN 4645-002:2009 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 002: Specification of performance and contact arrangements
EN 4644-002:2012 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
EN 4645-001:2010 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
EN 4640-001:2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
prEN 50109-2-1-1992 Hand crimping tools; tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications; part 2-1: specification for hand crimping tools for radio frequency connectors and concentric contacts; open throat too
prEN 50109-2-2-1992 Hand crimping tools; tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications; part 2-2: specification for hand crimping tools for radio frequency connectors and concentric contacts; specifications

RU-GOST R, DC Contactor Specifications

GOST 33798.3-2016 Electric equipment of a railway rolling stock. Part 3. D.c. circuit-breakers. General specifications
GOST ISO 8442-4-2013 Materials and articles in contact with foodstuffs. Cutlery and table hollowware. Part 4: Gold-plated cutlery. Specifications
GOST ISO 8442-1-2013 Materials and articles in contact with foodstuffs. Cutlery and table hollowware. Part 1. Cutlery for the preparation of food. Specifications
GOST ISO 8442-2-2013 Materials and articles in contact with foodstuffs. Cutlery and table hollowware. Part 2. Stainless steel and silver-plated cutlery. Specifications
GOST ISO 8442-8-2013 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Part 8. Silver table and decorative hollowware. Specifications
PNST 228-2017 Aviation equipment. Hydraulic systems. Straight, cross, triple, transitional and transitional connectors, under axial pressing for a pressure of 35 MPa. Specifications
GOST ISO 8442-3-2013 Materials and articles in contact with foodstuffs. Cutlery and table hollowware. Part 3. Silver-plated table and decorative hollowware. Specifications
GOST ISO 8442-5-2013 Materials and articles in contact with foodstuffs. Cutlery and table hollow-ware. Part 5. Cutlery. Sharpness and edge retention test
GOST ISO 8442-7-2013 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Part 7. Table cutlery made of silver, other precious metals and their alloys. Specifications

PT-IPQ, DC Contactor Specifications

Aerospace, Security and Defence Industries Association of Europe (ASD), DC Contactor Specifications

ASD-STAN PREN 2604-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 8 Degrees 30' Union Interface Dimensions (Issue P 1)
ASD-STAN PREN 2605-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 24 Degrees Union Interface Dimensions (Issue P 1)
ASD-STAN PREN 2603-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Port End Dimensions (Issue P 1)
ASD-STAN PREN 2645-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Locking Ring Dimensions (Issue P 1)
ASD-STAN PREN 2602-1987 Aerospace Series Ports for Installation of Straight Metric-Size Unions with Locking Ring Dimensions (Issue P 1)
ASD-STAN PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions (Issue P 1)
ASD-STAN PREN 4645-002-2008 Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Part 002: Specification of performance and contact arrangements (Edition P 1)
ASD-STAN PREN 3218-005-1995 Aerospace Series Connector, Rectangular, with Metallic Shells and Screw-Locking Part 005: Plug for Non-Removable Size 22 Solder Contacts Product Standard (Edition P1)
ASD-STAN PREN 3218-006-1995 Aerospace Series Connector, Rectangular, with Metallic Shells and Screw-Locking Part 006: Receptacle with Non-Removable Size 22 Solder Contacts Product Standard (Edition P1)

IN-BIS, DC Contactor Specifications

CEN - European Committee for Standardization, DC Contactor Specifications

EN 4531-002:2007 Aerospace series - Connectors@ optical@ circular@ single and multipin@ coupled by threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss

Society of Automotive Engineers (SAE), DC Contactor Specifications

SAE AS39029/59A-2010 Contacts, electrical connector, socket, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)
SAE AS5590A-2013 Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For

SAE - SAE International, DC Contactor Specifications

SAE AS39029/59B-2016 Contacts, electrical connector, socket, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)
SAE AS39029/59-2000 Contacts@ Electrical Connector@ Socket@ Crimp Removable@ Shielded@ Size 8 (for MIL-C-38999 Series I@ III@ and IV Connectors)

IECQ - IEC: Quality Assessment System for Electronic Components, DC Contactor Specifications

QC 480301/XX 0002-1995 Connectors with Assessed Quality@ for Use in d.c. Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 101: Detail Specification for Two-Part Connector Modules Having a Basic Grid of 2@0 mm for Pr
QC 480301/XX 0001-1994 Connectors with Assessed Quality for Use in d.c and Low Frequency Analogue Applications and in Digital Applications with High Speed Data Rates - Part 4: Printed Board Connectors - Section 100: Detail Specification Two-Part Connector Modules Having a Grid

KR-KS, DC Contactor Specifications

KS R IEC 62196-3-2017 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
KS C IEC 60384-13-2018 Fixed capacitors for use in electronic equipment — Part 13: Sectional specification — Fixed polypropylene film dielectric metal foil d.c. capacitors

Electronic Components, Assemblies and Materials Association, DC Contactor Specifications

ECA 700D000-1998 Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, DC Contactor Specifications

GB/T 18501.2-2001 Connectors for use in d.c.,low-frequency analogue and digital high speed data spplications--Part 2: Circular connectors with assessed quality--Sectional specification
GB/T 18501.1-2001 Connectors with assessed quality,for use in d.c.,low frequency analogue and in digital high speed data applications--Part 1: Generic specification

IEC - International Electrotechnical Commission, DC Contactor Specifications

TS 62661-2-1-2013 Optical backplanes – Product specification – Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors (Edition 1.0)