ZH
RU
ES

pm+

pm+, Total:169 items.

In the international standard classification, pm+ involves: Vocabularies, Air quality, Components for electrical equipment, Powder metallurgy, Bearings, Non-ferrous metals, Materials for aerospace construction, Products of non-ferrous metals, Flexible drives and transmissions, Aerospace engines and propulsion systems, Surface treatment and coating, Mobile services, Fasteners for aerospace construction.

US-FCR, pm+

FCR FED H-08-9 CHAP 212-1989 PULMONARY MEDICINE (PM)
FCR COE ER 690-1-1205-2001 PROPERTY MANAGEMENT (PM) SERVICES
FCR FED H-08-5 CHAP 212 TRANSMITTAL NO.188-1988 PULMONARY MEDICINE (PM), TRANSMITTAL NO. 188
FCR COE EP 18-1-7-1979 RESOURCE ALLOCATION/PROJECT MANAGEMENT (RA/PM) SUBSYSTEM OF COEMIS
FCR COE ER 18-1-36-1979 RESOURCE ALLOCATION/PROJECT MANAGEMENT (RA/PM) SUBSYSTEM OF COEMIS
FCR 40 CFR PART 1043-2014 CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL PROTOCOL
FCR 40 CFR PART 1043-2015 CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL PROTOCOL
FCR 40 CFR PART 1043-2013 CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL PROTOCOL

U.S. Military Regulations and Norms, pm+

ARMY MIL-A-13479-1954 ANEMOMETER ML-497( )/PM
ARMY MIL-B-11839 D VALID NOTICE 1-1988 BAROMETER, ANEROID ML-434( )/PM
ARMY MIL-B-11839 D-1982 BAROMETER, ANEROID ML-434( )/PM

American Gear Manufacturers Association, pm+

AGMA 08FTM08-2008 PM Materials for Gear Applications
AGMA 06FTM09-2006 Opportunities to Replace Wrought Gears with High Performance PM Gears in Automotive Applications

Professional Standard - Environmental Protection, pm+

HJ 618-2011 Determination of atmospheric articles PM and PM in ambient air by gravimetric method
HJ 949-2018 Technical specification for investigation of permeability coefficient of ambient air particulate matter (PM 2.5 ) in civil buildings

CZ-CSN, pm+

CSN 65 6916-1993 Grease far low temperatures PM-N1
CSN 65 6911-1993 Grease for plain bearings PM-K3 Graise pour paliers lisses PM-K3 Das Schmierfett fttr die Gkitlager PM-K3

SE-SIS, pm+

SIS SS 03 22 10-1987 Construction drawings - Revision PM

VDI - Verein Deutscher Ingenieure, pm+

VDI 2066 Blatt 10-2003 Measurement of particulate matter - Dust measurement in flowing gases - Measurement of PM₁₀ and PM_2@5 emissions
VDI 3397 BLATT 1-2018 Bearbeitungsmedien (BM) fuer die Umformung und Zerspanung - Kuehlschmierstoffe@ Umformschmierstoffe@ Minimalmengenschmierstoffe@ Multifunktionsoele
VDI 2066 BLATT 11-2016 Particulate matter measurement - Dust measurement in flowing gases - Measurement of emissions of crystalline silicon dioxide in the PM₄-fraction
VDI 2066 BLATT 11-2018 Particulate matter measurement - Dust measurement in flowing gases - Measurement of emissions of crystalline silicon dioxide (quartz and cristobalite) in the PM₄ fraction

PL-PKN, pm+

PN BN 6116-02-1967

AGMA - American Gear Manufacturers Association, pm+

08FTM08-2008 PM Materials for Gear Applications
942-A12-2012 Metallurgical Specifications for Powder Metallurgy@ PM@ Steel Gearing

RU-GOST R, pm+

GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors

German Institute for Standardization, pm+

DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 61247:1997 PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997
DIN EN 12341:2023-10 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2023
DIN CEN/TR 16269:2011-12*DIN SPEC 33965:2011-12 Ambient air - Guide for the measurement of anions and cations in PM<(Index)2,5>; German version CEN/TR 16269:2011
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2014 / Note: To be replaced by DIN EN 12341 (2022...
DIN ISO 16000-37:2019-05 Indoor air - Part 37: Measurement of PM<(Index)2,5> mass concentration (ISO 16000-37:2019)
DIN EN 12341:2022-06 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German and English version prEN 12341:2022 / Note: Date of issue 2022-05-...
DIN ISO 16000-37:2019 Indoor air - Part 37: Measurement of PM mass concentration (ISO 16000-37:2019)
DIN ISO 16000-37:2018 Indoor air - Part 37: Measurement of PM mass concentration (ISO/DIS 16000-37:2018); Text in German and English
DIN EN 61247:1997-12 PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997 / Note: To be replaced by DIN EN IEC 63093-10 (2022-03).
DIN EN 4629:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - D<(Index)e> 300 mm; German and English version EN 4629:2007
DIN CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM<(Index)2,5>; German version CEN/TR 16269:2011

Group Standards of the People's Republic of China, pm+

T/CAAMTB 54-2021 Test method for particulate matter filtration in vehicle cabin

International Electrotechnical Commission (IEC), pm+

IEC 61247:1995 PM-cores made of magnetic oxides and associated parts - Dimensions

American Society for Testing and Materials (ASTM), pm+

ASTM B935-20 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
ASTM B853-16 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM B935-16 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
ASTM B783-99e1 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
ASTM B853-12 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM B438-21 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B438-17 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B783-19 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
ASTM B823-20 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
ASTM B439-12 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B439-07 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil Impregnated)
ASTM B43-96 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM B43-91 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B439-18 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B439-21 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B823-15 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
ASTM B438-13 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM B439-06 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil Impregnated)
ASTM B853-16(2021)e1 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM B988-18(2022) Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
ASTM B988-18 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
ASTM B946-11(2016) Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
ASTM B933-16 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM B988-13 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
ASTM B946-23 Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
ASTM B925-15 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
ASTM B783-13 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
ASTM B966-10 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
ASTM B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM B925-15(2022) Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
ASTM B528-12 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM B970-09 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
ASTM B311-17 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B311-17(2017) Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM B939-21 Standard Test Method for Radial Crushing Strength,
ASTM B931-14 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy &40;PM&41; Parts
ASTM B931-14(2018)e1 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
ASTM B939-15 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
ASTM D8405-21 Standard Test Method for Evaluating PM2.5 Sensors or Sensor Systems Used in Indoor Air Applications
ASTM B962-15 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesrsquo; Principle
ASTM B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

International Organization for Standardization (ISO), pm+

ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 9982:2021 Belt drives - Pulleys and V-ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles: dimensions
ISO 9982:1991 Belt drives; pulleys and V-ribbed belts for industrial applications; dimensions; PH, PJ, PK, PL and PM profiles

Association Francaise de Normalisation, pm+

NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF E24-402:1991 Belts drives. Pulleys and V-ribbed belts for industrial applications. Dimensions. PH, PJ, PK, PL and PM profiles.
NF L10-546:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De < or = 300 mm.
FD CEN/TR 17554:2021 Air ambiant - Application de la norme EN 16909 pour le dosage du carbone élémentaire (EC) et du carbone organique (OC) dans les fractions PM10 et PMgrossière
NF L10-545:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De < or = 150 mm - 1 100 MPa < or = Rm < or = 1 300 MPa.
NF L10-548:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De < or = 200 mm - 900 MPa < or = Rm < or = 1 050 MPa.

British Standards Institution (BSI), pm+

BS EN 61247:1997 PM-cores made of magnetic oxides and associated parts - Dimensions
BS ISO 16000-37:2019 Indoor air - Measurement of PM₂$d,₅ mass concentration
BS ISO 9982:1998 Belt drives - Pulleys and V-ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles - Dimensions
BS EN 4629:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De 300 mm
BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 4627:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De 150 mm - 1100 MPa Rm 1300 MPa
BS EN 4628:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De 150 mm - 1100 MPa Rm 1300 MPa
BS EN 4630:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De 200 mm - 900 MPa Rm 1050 MPa
BS EN 4631:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De 200 mm - 900 MPa Rm 1050 MPa
BS EN 4628:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De 150 mm. 1100 MPa Rm 1300 MPa
BS EN 4631:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De 200 mm. 900 MPa Rm 1050 MPa
BS EN 4627:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De 150 mm. 1100 MPa Rm 1300 MPa
BS EN 4630:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De 200 mm. 900 MPa Rm 1050 MPa

International Telecommunication Union (ITU), pm+

ITU-T T.562 FRENCH-1988 TERMINAL CHARACTERISTICS FOR TELETEX PROCESSABLE MODE PM.1
ITU-T T.562 SPANISH-1988 TERMINAL CHARACTERISTICS FOR TELETEX PROCESSABLE MODE PM.1
ITU-T T.562-1988 TERMINAL CHARACTERISTICS FOR TELETEX PROCESSABLE MODE PM.1

Society of Automotive Engineers (SAE), pm+

SAE AMS7239A-1986 Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 60Co 29Cr 4.5W (0.90-1.40C) (Reaffirmed: 01 Jan 1991) (Noncurrent: 01 Mar 1994) (Reaffirmed: 01 Oct 2000)
SAE AMS7238A-1986 Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 56Co 30Cr 8.25W (1.10-1.90C) (Reaffirmed: 01 Jan 1991) (Noncurrent: 01 Mar 1994) (Reaffirmed: 01 Oct 2000)
SAE AMS7239-1986 ALLOY PM SHAPES, CORROSION, WEAR, AND HEAT RESISTANT 60Co - 29Cr - 4.5W (0.90 - 1.40C)
SAE AMS7239A-2000 Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 60Co - 29Cr - 4.5W (0.90 - 1.40C)
SAE AMS7238A-2000 Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 66Co - 30Cr - 8.25W (1.10 - 1.90C)

SAE - SAE International, pm+

SAE AMS7238B-2001 Alloy PM Shapes@ Corrosion@ Wear@ and Heat Resistant 66Co - 30Cr - 8.25W (1.10 - 1.90C)
SAE AMS7239A-1994 Alloy PM Shapes@ Corrosion@ Wear@ and Heat Resistant 60Co - 29Cr - 4.5W (0.90 - 1.40C)
SAE AMS7239B-2001 Alloy PM Shapes@ Corrosion@ Wear@ and Heat Resistant 60Co - 29Cr - 4.5W (0.90 - 1.40C)
SAE AMS7238-1986 ALLOY PM SHAPES@ CORROSION@ WEAR@ AND HEAT RESISTANT 56Co - 30Cr - 8.25W (1.10 - 1.90C) (UNS R30012)
SAE AMS7238A-1994 ALLOY PM SHAPES@ CORROSION@ WEAR@ AND HEAT RESISTANT 56Co - 30Cr - 8.25W (1.10 - 1.90C) (UNS R30012)

未注明发布机构, pm+

ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
BS 2590-1:1969(2000) Specification for Powder metallurgical products (P.M. Products) — Part 1 : Sintered metal components for general engineering purposes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pm+

GB/T 16588-1996 V-ribbed belts and pulleys for industrial applications--Dimensions (PH PJ PK PL and PM profiles)
GB/T 20873-2007 PM-cores made of magnetic oxides and associated parts dimensions
GB/T 16588-2009 Belt drives-Pulleys and V-ribbed belts for industrial applications-PH,PJ,PK,PL and PM profiles: dimensions

(U.S.) Telecommunications Industries Association , pm+

TIA-603-C-2004 Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards [Replaced: TIA 152-C]
TIA-603-D-2010 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards
TIA-603-E-2016 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards

TIA - Telecommunications Industry Association, pm+

TIA/EIA-603-A-2001 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards
TIA-603-B-2002 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards
152-C-1988 Minimum Standards for Land Mobile Communication FM or PM Transmitters@ 25-866 MHz
RS-204-B-1980 MINIMUM STANDARDS FOR LAND MOBILE COMMUNICATION FM OR PM RECEIVERS@ 25-947 MHz
RS-204-C-1982 MINIMUM STANDARDS FOR LAND MOBILE COMMUNICATION FM OR PM RECEIVERS@ 25-947 MHz
EIA/TIA-204-D-1989 MINIMUM STANDARDS FOR LAND MOBILE COMMUNICATION FM OR PM RECEIVERS@ 25-866 MHz
RS-388-1971 Minimum Standard for Test Conditions Common to FM or PM Land-Mobile Communications Equipment 25-470 MHz
TIA/EIA-603-1-1998 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Addendum to TIA/EIA-603 (Addendum 1 to TIA/EIA-603)

European Committee for Electrotechnical Standardization（CENELEC）, pm+

EN 61247:1997 PM-Cores Made of Magnetic Oxides and Associated Parts - Dimensions

Danish Standards Foundation, pm+

DS/EN 61247:1998 PM-cores made of magnetic oxides and associated parts - Dimensions
DS/EN 4630:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De â‰¤ 200 mm - 900 MPa â‰¤ Rm â‰¤ 1 050 MPa
DS/CEN/TR 17554:2020 Ambient air – Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse
DS/EN 3323:2009 Aerospace series - Bolts with double hexagon head, relieved shank, long thread - In heat resisting steel FE-PM 38 (FV 535) - Classification: 1 000 MPa/550 °C

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., pm+

ASHRAE LO-09-082-2009 Laboratory Evaluation and Modeling of Electrostatic Precipitation of PM Emissions from Poultry Buildings

ES-UNE, pm+

UNE-EN 61247:1997 PM-CORES MADE OF MAGNETIC OXIDES AND ASSOCIATED PARTS. DIMENSIONS (Endorsed by AENOR in October of 1998.)

IN-BIS, pm+

IS 13909-1993 Dimensions of PM-cores made of magnetic oxides and associated parts

American National Standards Institute （ANSI), pm+

ANSI/TIA-603-D-2010 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards

Lithuanian Standards Office , pm+

LST EN 61247-2001 PM-cores made of magnetic oxides and associated parts. Dimensions (IEC 61247:1995)
LST EN 4630-2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
LST EN 4629-2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ? 300 mm
LST EN 4627-2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ? 150 mm - 1 100 MPa ? Rm ? 1 300 MPa
LST EN 4628-2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De ? 150 mm - 1 100 MPa ? Rm ? 1 300 MPa
LST EN 4631-2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa

Korean Agency for Technology and Standards (KATS), pm+

KS B ISO 9982:2004 Belt drives-Pulleys and V-ribbed belts for industrial applications-PH, PJ, PK, PL and PM profiles:Dimensions
KS B ISO 9982:2013 Belt drives－Pulleys and V-ribbed belts for industrial applications－PH, PJ, PK, PL and PM profiles：Dimensions
KS B ISO 9982-2004(2009) Belt drives－Pulleys and V-ribbed belts for industrial applications－PH, PJ, PK, PL and PM profiles：Dimensions

European Telecommunications Standards Institute (ETSI), pm+

ETSI TS 132 104-2003 Universal Mobile Telecommunications System (UMTS); 3G Performance Management 3GPP TS 32.104 Version 3.6.0 Release 1999
ETSI TS 132 104-2000 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; 3G Performance Management (PM) 3GPP TS 32.104 Version 3.3.0 Release 1999
ETSI TS 132 104-2004 Universal Mobile Telecommunications System (UMTS); Telecommunication management; 3G Performance Management (3GPP TS 32.104 Version 3.9.0 Release 1999)
ETSI TS 132 104-2001 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; 3G Performance Management (PM) 3GPP TS 32.104 Version 4.0.0 Release 4

GB-REG, pm+

REG 40 CFR PART 1043-2011 CONTROL OF NOX, SOX, AND PM EMISSIONS FROM MARINE ENGINES AND VESSELS SUBJECT TO THE MARPOL PROTOCOL

US-CFR-file, pm+

CFR 40-1065.140-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.140:Dilution for gaseous and PM constituents.
CFR 40-1065.170-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.170:Batch sampling for gaseous and PM constituents.
CFR 40-1065.690-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.690:Buoyancy correction for PM sample media.
CFR 40-1065.295-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.295:PM inertial balance for field-testing analysis.

European Committee for Standardization (CEN), pm+

EN 4629:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De less than or equal to 300 mm

ETSI - European Telecommunications Standards Institute, pm+

TS 132 104-2001 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; 3G Performance Management (PM) (3GPP TS 32.104 Version 4.0.0 Release 4)

Aerospace, Security and Defence Industries Association of Europe (ASD), pm+

ASD-STAN PREN 2226-2011 Aerospace series Steel FE-PM 3501 (X105CrMo17) Hardened and tempered Hand and die forgings De ≤ 150 mm (Edition P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, pm+

PREN 2226-2011 Aerospace series Steel FE-PM 3501 (X105CrMo17) Hardened and tempered Hand and die forgings De ≤ 150 mm (Edition P 1)