ZH
RU
ES
base
base, Total:226 items.
In the international standard classification, base involves: Paints and varnishes, Dentistry, Earthworks. Excavations. Foundation construction. Underground works, Fluid storage devices, Heat recovery. Thermal insulation, Plastics, Quality, Structures of buildings, Surface treatment and coating, Rubber, Construction materials, Thermodynamics and temperature measurements, Insulating materials, Medical equipment, Printed circuits and boards, Elements of buildings, Corrosion of metals, Leather technology, Materials for aerospace construction, Road engineering, Paper and board, Electrical accessories, Linear and angular measurements, Analytical chemistry, Paint coating processes, Office machines, Rubber and plastics products, Non-textile floor coverings, Semiconducting materials, Photography, Adhesives, Housings, enclosures, other machine parts, Wastes, Conducting materials.
(U.S.) Ford Automotive Standards, base
- FORD WSK-M6J174-A-1994 PRIMER, WATERBASED, ONE PACK, PLASTIC SUBSTRATES
- FORD ESK-M62J23-A-1993 PAINT, WATERBORNE, FOR PLASTIC SUBSTRATES, INTERIOR
- FORD WSS-M14J517-A-1997 SOLVENT, WATERBORNE BASECOAT PURGE MATERIAL
- FORD ESK-M6J9566-A2-1991 PRIMER, REPAIR AIR DRYING, WATER BASED BASECOAT
- FORD ESK-M2G264-A-1994 ADHESIVE, PRIMER, SYNTHETIC RUBBER BASED, FOR ADHESIVE TAPE
- FORD ESK-M2G264-A2-1995 ADHESIVE, PRIMER, SYNTHETIC RUBBER BASED, FOR ADHESIVE TAPE
- FORD ESK-M2G264-A3-1987 ADHESIVE, PRIMER, ACRYLATE BASED, FOR ADHESIVE TAPE
- FORD ESB-M6J156-A-1989 PRIMER SURFACER, 2- COMPONNT, CHIP RESISTANT, THERMOPLASTIC SUBSTRATES
- FORD ESK-M16J5-A-2000 PAINT, BASECOAT, SOLVENT BASED, LOW BAKE, METALLIC
- FORD WSB-M64J37-A-1995 PRIMER, WATERBASED, COMPLIANCE VOC, INTERIOR
- FORD WSK-M15J11-A1-2001 PAINT, TWO PACK, WATER BASED, SOFT COATING EFFECT PLASTIC SUBSTRATES, INTERIOR
- FORD ESK-M16J4-A-1993 PAINT, CLEARCOAT, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE, EXTERIOR
- FORD WSK-M15J2-A-1990 PAINT, ONE PACK, PLASTIC SUBSTRATES, INTERIOR
- FORD WSK-M16J4-B-2001 PAINT, CLEARCOAT, TWO PACK, HIGH FLEXIBLE, PLASTIC SUBSTRATES, EXTERIOR
- FORD ESK-M6J147-A-2008 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M6J147-B-2008 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4G174-A-1978 SEALER, SYNTHETIC RESIN BASE-HIGH TEMPERATURE HEAT CURING NONFLOW, ELECTROCOATED SUBSTRATES
- FORD ESB-M4G177-B2-1989 SEALER, VINYL BASED, SELF LEVELLING, HEAT CURE, PAINTABLE, FOR ELECTROCOATED SUBSTRATES
- FORD SK-M1J9563-A-2008 PAINT, CLEARCOAT, TWO PACK, FOR PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M6J142-A-2008 PRIMER, FLASH - FOR POLYOLEFIN SUBSTRATES ?EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M99J370-A-2006 HARDENER, WATER BASED PRIMER, POLYPROPYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-FM4G176-B-2008 SEALER, HEAT CURING, THUMBABLE, SYNTHETIC RESIN BASE, ELECTROCOATED SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M16J9-A1-1992 PAINT, TWO COMPONENT, COLOR AND CLEAR COAT, FOR PLASTIC SUBSTRATES, FIRST SURFACE EXTERIOR
- FORD WSS-M1H829-A2-2003 FABRIC, PORT BASE PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M16J3-A-1993 PAINT, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE, EXTERIOR, PAINTING OF PLASTIC BUMPERS IN BODY COLOR
- FORD SK-M99J9578-B-2006 PAINT, TWO PACK, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P180-B-2005 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2J113-A-2008 ENAMEL, BAKING, CHROMIUM PLATED SUBSTRATES - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P180-C-2008 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P181-C-2008 PAINT PERFORMANCE, FLEXIBLE SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P188-A1-2008 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M64J24-A-1987 PAINT, WATERBORNE WHEEL PRIMER, ACRYLIC ENAMEL, CATHODIC ELECTROCOAT Replaces ESA-M64J17-A:1979 and ESE-M24J22-A: 1982
- FORD ESB-M4D400-A-1979 LAMINATE RIGID POLYSTYRENE, FOAM/FILM- THERMOFORMABLE, HEADLINING SUBSTRATE
IE-NSAI, base
Professional Standard - Chemical Industry, base
未注明发布机构, base
Taiwan Provincial Standard of the People's Republic of China, base
- CNS 11556-1986 Dental Base Plates
- CNS 11745-1986 Base Plate Wax
- CNS 12958-1992 Dental Base Metal Casting Alloys
- CNS 13800-1996 Photography-Processed Photographic Black-and-White Film for Archival Records-Silver-Gelatin Type on Poly (Ethylene Terephthalate) Base-Specification
- CNS 13801-1996 Photography-Processed Photographic Black-and-White Film for Archival Records-Silver-Gelatin Type on Cellulose Ester Base-Specifications
United States Navy, base
HU-MSZT, base
Korean Agency for Technology and Standards (KATS), base
SE-SIS, base
Professional Standard - Speciality, base
Association Francaise de Normalisation, base
- NF S12-124*NF EN ISO 10940:2009 Ophthalmic instruments - Fundus cameras
- NF E86-303:1989 Industrial plants. Thermal insulation of tanks. Coating support.
- NF A05-600*NF EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
- NF A91-127*NF EN 14571:2005 Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Microresistivity method
- NF Q03-006:1983 Paper and board tests. Measurement of opacity (white paper backing) (diffuse reflectance method).
- NF T46-058:2010 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 o peel method.
- XP T35-502-1-1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness.
GM North America, base
- GM GM4366M-1989 Lithoprint for Aluminum or Thermoplastic Substrates
- GM GM9194P-1988 Binder Content of Fiberglass Substrates
- GM 9986314-2009 Topcoat System, Low Bake 1K Waterborne Basecoat / 2K Waterborne Clearcoat
- GM GM4372M-2011 Decorative Chromium Plating - Copper, Nickel, Chromium Type (Issue 2; Do Not Use on New Programs; Replaced by GMW14672 for metal substrates and GMW14668 for plastic substrates)
- GM GM9509P-1995 Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates
- GM 9986315-2009 Topcoat System, Low Bake 1K Waterborne Basecoat / 2K Solventborne Clearcoat
- GM GM9901P-2011 Adhesive Sample Preparation for Metallic Substrates (Issue 5; Do Not Use on New Programs; No Replacement)
IPC - Association Connecting Electronics Industries, base
RO-ASRO, base
- STAS 4121-1975 Varnishes and paints NITROCELLULOSE - BASED PRIMERS GREY PRIMER 2446
US-DOT, base
PL-PKN, base
- PN H93427-01-1988 Steel Finned sections and tinned base-plates lor track structurc
- PN H93427-51-1988 Steel Finned sections and finned base-plates for track structurc Finned base-platc Pm60 dimensions
- PN H93427-52-1988 Steel Finned sections and finned base-plates for track structure Finned base-plate Pz60 dimensions
- PN H93427-53-1988 Steel Finned sections and finned base-plates for track structure Finned base-plate Ps60 dimensions
- PN H93427-55-1988 Steel Finned sections and finned base-plates for track structure Finned base-plate Pm49 dimensions
- PN H93427-56-1988 Steel Finned sections and finned base-plates for track structure Finned base-plate Pz49 dimensions
- PN H93427-57-1988 Steel Finned sections and finned base-plates for track structure Finned base-plate BL3 dimensions
- PN H93427-02-1988 Steel Finned sections and finned base-plates for track structure Section KPZ2 dimensions
- PN H93427-03-1988 Steel Finned sections and finned base-plates for track structure Section KPZ3 dimensions
- PN H93427-04-1988 Steel Finned sections and finned base-plates for track structure Section KPZ4 dimensions
- PN H93427-05-1988 Steel Finned sections and finned base-plates for track structure Section KPZ5 dimensions
- PN H93427-06-1988 Steel Finned sections and finned base-plates for track structure Section KPZ6 dimensions
- PN H93427-54-1988 Steel Finned sections and finned base plates for track structure Finned base-plate assymetrical Ps49 dimensions
- PN C99465-09-1993 Photography. Determination of basic sensitometric values at reflected light for coloured materials on opaque base
KR-KS, base
U.S. Military Regulations and Norms, base
US-FCR, base
Group Standards of the People's Republic of China, base
- T/ZZXJX 257-2022 Technical specification for hydrostatic pressure control of building foundation
- T/CAQI 109-2020 Specification for quality evaluation of bio-inspired surface enhanced Raman substrate
- T/CADBM 50-2021 Non-woven base for wall covering
British Standards Institution (BSI), base
- BS EN ISO 16744:2003 Dentistry - Base metal materials for fixed dental restorations
- BS 2523:1966 Specification for lead-based priming paints
- BS EN ISO 8501-2:1996 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
- BS DD IEC/PAS 62326-14:2010 Printed boards. Device embedded substrate. Terminology / reliability / design guide
- BS PD IEC TS 62607-6-3:2020 Nanomanufacturing. Key control characteristics. Graphene-based material. Domain size: substrate oxidation
- BS 8204-2:2003+A2:2011 Screeds, bases and in situ floorings. Concrete wearing surfaces. Code of practice
- BS EN 14571:2005 Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method
- BS 8204-5:2004+A1:2011 Screeds, bases and in situ floorings. Mastic asphalt underlays and wearing surfaces. Code of practice
- BS ISO 16938-1:2008 Building construction - Determination of the staining of porous substrates by sealants used in joints - Test with compression
- BS 8204-4:2004+A1:2011 Screeds, bases and in situ floorings. Cementitious terrazzo wearing surfaces. Code of practice
- BS ISO 24417:2022 Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
Canadian General Standards Board (CGSB), base
- CGSB 62-GP-6M-1982 Standard for Prefabricated Transparent-Base Markings, General- Purpose, for Use on Exterior and Interior Surfaces
- CGSB 62-GP-7M-1982 Standard for Prefabricated"Mirrorized" Markings, General Purpose, for Use on Exterior and Interior Surfaces
- CGSB 1-GP-71 METH 12.7-1974 Methodes D'Essai Des Peintures Et Pigments Couleur Couleur Des Impressions Et Peintures-Laque A La Nitrocellulose
- CGSB 1-GP-71 METH 135.3-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Adherence Des Peintures Primaires Vinyliques
- CGSB 62-GP-8M-1980 Standard for Prefabricated Opaque Markings, General Purpose, for Use on Exterior and Interior Surfaces
American Society for Testing and Materials (ASTM), base
- ASTM D6878/D6878M-11a Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
- ASTM D429-99 Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates
- ASTM C844-04 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- ASTM B650-95(2023) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- ASTM D413-98(2002)e1 Standard Test Methods for Rubber Property8212;Adhesion to Flexible Substrate
- ASTM C1047-99(2004) Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM D413-98 Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
- ASTM D413-98(2007) Standard Test Methods for Rubber Propertyx2014;Adhesion to Flexible Substrate
- ASTM C844-15(2021) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- ASTM C1047-09 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM C1047-05 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM C844-99 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- ASTM C1047-14 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM D429-08 Standard Test Methods for Rubber Property8212;Adhesion to Rigid Substrates
- ASTM D413-98(2013) Standard Test Methods for Rubber Propertymdash;Adhesion to Flexible Substrate
- ASTM E608/E608M-00 Standard Specification for Mineral-Insulated, Metal-Sheathed Base-Metal Thermocouples
- ASTM E608/E608M-00(2004) Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
- ASTM D429-02a Standard Test Methods for Rubber Property8212;Adhesion to Rigid Substrates
- ASTM D429-02 Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates
- ASTM F692-97 Standard Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
- ASTM D429-03 Standard Test Methods for Rubber Property8212;Adhesion to Rigid Substrates
- ASTM D2686-00 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
- ASTM D429-14e1 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
- ASTM C1177/C1177M-13 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM C1177/C1177M-99 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM C1177/C1177M-01 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM C1177/C1177M-06 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM C1177/C1177M-08 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM D2686-06(2012) Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
- ASTM C1177/C1177M-17 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- ASTM D1241-07 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
- ASTM C844-15 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- ASTM D7522/D7522M-09 Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
- ASTM D2626-04 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
- ASTM D2626/D2626M-04(2012)e1 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
- ASTM E2181/E2181M-11 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
- ASTM D5723-95(2002) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM E2820-13 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
- ASTM E2820-11 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
- ASTM D5723-95(2019) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM F92-93(1998) Standard Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons
- ASTM E585/E585M-12 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
- ASTM D6900-10 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
- ASTM E585/E585M-09 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
- ASTM E608/E608M-13 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
- ASTM F928-93(1999) Standard Test Methods for Edge Contour of Circular Semiconductor Wafers and Rigid Disk Substrates
- ASTM F1366-92(1997)e1 Standard Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates by Secondary Ion Mass Spectrometry
- ASTM D3003-01(2022) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
- ASTM D3808-01 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
- ASTM B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B499-09(2014) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM D3808-01(2007) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
- ASTM D3808-01(2013) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
- ASTM B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B499-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM D6868-03 Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
- ASTM B49-15 Standard Specification for Copper Rod for Electrical Purposes
- ASTM B49-08 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
- ASTM B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
- ASTM B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ZA-SANS, base
- SANS 1227:2005 Textured wall coatings, emulsion base, for interior and exterior use
- SANS 10109-1:2009 Concrete floors Part 1: Bases to concrete floors
- SANS 8403:1991 Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion tests
International Organization for Standardization (ISO), base
Professional Standard - Aerospace, base
- QJ 1207A-2011 Technical requirements for nickel-base acid hard gold plating of printed circuit board edge contact
European Committee for Standardization (CEN), base
- BS EN ISO 8501-2:2001 Visual assessment of surface cleanliness of steel substrates pre-treated before application of paint and related products Grade of treatment of steel substrates after partial removal of original coating
- EN ISO 16744:2003 Dentistry - Base metal materials for fixed dental restorations ISO 16744:2003
- EN 14571:2005 Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method
- EN 13238:2001 Reaction to Fire Tests for Building Products - Conditioning Procedures and General Rules for Selection of Substrates
General Motors Corporation (GM), base
Professional Standard - Urban Construction, base
- CJJ/T 80-1998 Technical specification for road bases and subbases with chemical stabilization
RU-GOST R, base
- GOST 938.32-1980 Leather. Method for determination of colour conformity of surface paint to the basic colour of chrome leather
- GOST 25665-1983 Phosphates fire protective steel coating of the mineral fibres. Technical requirements
- GOST 27023-1986 Welded carpets of PVC linoleum on heat- and sound-insulating backing. Specifications
- GOST 12622-1978 Flat heads witch knuckle. General dimensions
Society of Automotive Engineers (SAE), base
- SAE AMS-T-21014-1998 Tungsten Base Metal, High Density Should Be Used Instead of MIL-T-21014D, Which Was Cancelled on October 5, 1998
- SAE J1837-1991 Electroplate Requirements for Decorative Chromium Deposits on Zinc base Materials Used for Exterior Ornamentation
Jilin Provincial Standard of the People's Republic of China, base
- DB22/T 470-2009 Technical specification for pavement base course of lime fly ash stabilized material
AT-ON, base
SAE - SAE International, base
- SAE J1837-2017 Electroplate Requirements for Decorative Chromium Deposits on Zinc Base Materials Used for Exterior Ornamentation
CH-SNV, base
- SN 210 906-1-1986 Aluminium and aluminium alloys, wrought productsWires, drawnMechanical properties
Japanese Industrial Standards Committee (JISC), base
- JIS Z 0313:1998 Tests and assessment of abrasive blast-cleaned substrates before application of paints and related products
German Institute for Standardization, base
- DIN EN 14571:2005 Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method; German version EN 14571:2005
- DIN EN 13494:2003 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002
- DIN EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations; German version EN 16299:2013
Military Standard of the People's Republic of China-General Armament Department, base
- GJB 3766-1999 Method for measuring the thickness of hard-based explosive foil of impact disk detonators - Surface profilometer method
International Electrotechnical Commission (IEC), base
- IEC PAS 62326-14:2010 Printed boards - Part 14: Device embedded substrate - Terminology / reliability / design guide
National Association of Corrosion Engineers (NACE), base
- NACE TM0105-2005 Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures Item No:21247