ZH
RU
ES

geometric tolerance

geometric tolerance, Total:326 items.

In the international standard classification, geometric tolerance involves: Technical drawings, Rubber and plastics products, Furniture, Linear and angular measurements, Characteristics and design of machines, apparatus, equipment, Vocabularies, Construction industry, Equipment for entertainment, Rotating machinery, Road vehicle systems, Bearings, Iron and steel products, Products of non-ferrous metals, Materials and components for railway engineering, Technical product documentation.

SE-SIS, geometric tolerance

SIS SS-ISO 5459:1984 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
SIS SS-ISO 2692:1989 Technical drawings — Geometrical tolerancing — Maximum material principle
SIS SS-ISO 7083:1984 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
SIS SS-ISO 2768-2:1992 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
SIS SS 2650-1989 Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Verification principles and methods — Guidelines
SIS SS-ISO 1101:1984 Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings

CZ-CSN, geometric tolerance

CSN ISO 5459:1994 Technical drawings-Geometrical tolerancing-Datums and datum-system for geometrical tolerances
CSN 01 4406-1981 Geometricul tolorances not indicated on drawings
CSN 01 4401-1981 Geometrical tolerances. Basic terms and definitions
CSN ISO 2768-2:1994 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

AT-ON, geometric tolerance

ONORM ISO 5459:1985 Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances
ONORM ISO 5458:1989 Technical drawings; geometrical tolerancing; positional tolerancing
ONORM ISO 2768 Teil.2:1990 General tolerances; geometrical tolerances for features without individual tolerance indications
ONORM ISO 7083:1985 Technical drawings; Symbols for geometrical tolerancing; proportions and dimensions
OENORM EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
ONORM EN 22768-2-1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
ONORM ISO 2692:1993 Technical drawings - Geometncal tolerancing -Maximum matenal principle - Least material requirement
ONORM ISO 1101:1985 Technical drawings; geometrical tolerancing: tolerances of form, orientation, location and run-out; generalities, definitions, symbols, indications on drawings

NO-SN, geometric tolerance

NS 1428-1982 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
NS 3461-2005 Geometrical tolerances in building - Basic concepts
NS-ISO 2692:1993 Technical drawings. Geometrical tolerancing. Maximum material principle
NS 1429-1985 Technical drawings - Symbols for geometrical tolerancing, proportions and dimensions

AENOR, geometric tolerance

UNE 1128:1995 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. DATUMS AND DATUM-SYSTEMS FOR GEOMETRICAL TOLERANCES.
UNE-EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998).
UNE 1121-2:1995 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. MAXIMUM MATERIAL PRINCIPLE.
UNE-EN ISO 5459:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
UNE-EN ISO 7083:1996 TECHNICAL DRAWINGS. SYMBOLS FOR GEOMETRICAL TOLERANCING. PROPORTIONS AND DIMENSIONS. (ISO 7083:1983).
UNE-EN 22768-2:1994 GENERAL TOLERANCES. PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS. (ISO 2768-2:1989).
UNE 1121-2/1M:1996 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. MAXIMUM MATERIAL PRINCIPLE. AMENDMENT 1: LEAST MATERIAL REQUIREMENTS.
UNE-EN ISO 8062-1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)

RO-ASRO, geometric tolerance

STAS 7384-1985 GEOMETR1CAL TOLERANCING Definitions
STAS 7385/2-1985 Technical drawings GEOMETRICAL TOLERANCES Datum anddatum — systems
STAS SR ISO 7083:1996 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
STAS 7385/1-1985 Technical drawings GEOMETRICAI. TOLERANCES Tolerances of form, orientation, location and run-out
STAS SR EN 22768-2-1995 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
STAS SR ISO 2692/A1:1996 Technical drawings. Geometrical tolerancing. Maximum material principie Amendment 1: Least material requirement

Korean Agency for Technology and Standards (KATS), geometric tolerance

KS B 0608-2007 Indications of geometrical tolerances on drawings
KS B 0243-2007 Datums and datum-systems for geometrical tolerances
KS B ISO 5459:2004 Technical drawings-Geometrical tolerancing-Datums and datum-systems for geometrical tolerances
KS B ISO 5459:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Datums and datum systems
KS B 0608-2007(2012) Indications of geometrical tolerances on drawings
KS A ISO 1660:2020 Geometrical product specifications(GPS) — Geometrical tolerancing —Profile tolerancing
KS B 0148-1992(2002) TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B ISO 5458:2008 Geometrical Product Specifications(GPS)-Geometrical tolerancing-Positional tolerancing
KS B ISO 5458:2014 Geometrical Product Specifications(GPS) — Geometrical tolerancing — Positional tolerancing
KS M ISO 3302-2:2008 Rubber－Tolerances for products－Part 2：Geometrical tolerances
KS M ISO 3302-2:2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS B ISO 5458:2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification
KS B 0243-2007(2012) Datums and datum-systems for geometrical tolerances
KS B ISO 2768-2:2002 General tolerances-Part 2:Geometrical tolerances for features without individual tolerance indications
KS B ISO 2768-2:2014 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS B ISO 5459-2014(2019) Geometrical product specifications(GPS) — Geometrical tolerancing — Datums and datum systems
KS A ISO 2692:2003 Technical drawings-Geometrical tolerancing-Maximum material principle
KS B ISO 2692-1:2004 Technical drawings－Geometrical tolerancing－Maximum material principle
KS B ISO 2692-1:2007 Technical drawings－Geometrical tolerancing－Maximum material principle
KS A ISO 7083:2019 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimension
KS A ISO 1101:2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101:2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS B ISO 2768-2-2014(2019) General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS B 0146-2006 GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
KS B ISO 8062-1-2014(2019) Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
KS B 0146-1992(2002) GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
KS B ISO 8062-1:2014 Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
KS B ISO 8062-1:2012 Geometrical product specifications(GPS)-Dimensional and geometrical tolerances for moulded parts-Part 1:Vocabulary
KS A ISO 1101:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101:2002 Geometrical product specifications(GPS)-Geometrical tolerancing- Tolerancing of form, orientation, location and run-out
KS B ISO 2692-2:2004 Technical drawings－Geometrical tolerancing－Maximum material principle－Part 2：Least material requirement
KS B ISO 2692-2:2007 Technical drawings－Geometrical tolerancing－Maximum material principle－Part 2：Least material requirement
KS B ISO 5460:2005 Technical drawings-Geometrical tolerancing-Tolerancing of form, orientation, location and run-out-Verification principles and methods-Guidelines
KS B ISO 5460:2015 Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
KS B ISO 2692:2014 Geometrical product specifications(GPS) ? Geometrical tolerancing ? Maximum material requirement(MMR), least material requirement(LMR) and reciprocity requirement(RPR)
KS B ISO 2692:2015 Geometrical product specifications(GPS) — Geometrical tolerancing — Maximum material requirement(MMR), least material requirement(LMR) and reciprocity requirement(RPR)
KS B ISO 1101:2003 Technical drawings－Geometrical tolerancing－Tolerancing of form, orientation, location and run-out－Generalities, definitions, symbols, indications on drawings
KS B ISO 5460-2005(2010) Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
KS B ISO 1101:2007 Technical drawings－Geometrical tolerancing－Tolerancing of form, orientation, location and run-out－Generalities, definitions, symbols, indications on drawings
KS B ISO 2692:2020 Geometrical product specifications(GPS) — Geometrical tolerancing — Maximum material requirement(MMR), least material requirement(LMR) and reciprocity requirement(RPR)

British Standards Institution (BSI), geometric tolerance

BS ISO 3302-2:2022 Rubber. Tolerances for products - Geometrical tolerances
BS ISO 5459:2000 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
BS EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
BS EN ISO 1660:2017 Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
19/30369878 DC BS EN ISO 22081. Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical and dimensional specifications
BS EN ISO 5458:2018 Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
BS ISO 492:2014 Rolling bearings. Radial bearings. Dimensional and geometrical tolerances
BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS EN ISO 22081:2021 Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
BS EN ISO 7083:1995 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
16/30314605 DC BS EN ISO 5459. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS EN 22768-2:1993 General tolerances - Geometrical tolerances for features without individual tolerance indications
BS 5100:1974 Guide to the principles of geometrical tolerancing (conforming to BS 308:Part 3:1972)
BS EN ISO 1101:2013 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2017 Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
22/30449684 DC BS EN ISO 5459:2011 AMD1. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
19/30395140 DC BS EN ISO 8062-3. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Part 3. General dimensional and geometrical tolerances and machining allowances for castings
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
BS EN ISO 8062-3:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
BS EN ISO 8062-1:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Vocabulary
BS EN ISO 2692:2021 Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
19/30374420 DC BS EN ISO 2692. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 2692:2007 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

Professional Standard - Light Industry, geometric tolerance

QB/T 4453-2013 Wooden furniture.Geometrical tolerancing

ISUZU - Isuzu Motors Ltd., geometric tolerance

ISA-K-012C-2012 Geometrical toleranceing (Japanese Version)

Taiwan Provincial Standard of the People's Republic of China, geometric tolerance

CNS 3-4-1999 Engineering drawings - Geometrical toleranicing
CNS 3.4-1999 Engineering drawings - Geometrical toleranicing
CNS 10326-1993 Geometry Tolerance of Flange Type Rotating Electric Machines
CNS 3-12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3-13-1994 Engineering Drawing (Geometrical Tolerancing - Positional Tolerancing)
CNS 3.13-1994 Engineering Drawing (Geometrical Tolerancing - Positional Tolerancing)
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-15-1994 Engineering Drawing (Geometrical Tolerancing - Proportions and Dimensions for Symbols)
CNS 3.15-1994 Engineering Drawing (Geometrical Tolerancing - Proportions and Dimensions for Symbols)
CNS 3-14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 3.14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)

International Organization for Standardization (ISO), geometric tolerance

ISO 5459:1981 Technical drawings; Geometrical tolerancing; Datums and datum-systems for geometrical tolerances
ISO 5458:1987 Technical drawings; Geometrical tolerancing; Positional tolerancing
ISO 3302-2:2008 Rubber - Tolerances for products - Part 2: Geometrical tolerances
ISO 3302-2:2022 Rubber — Tolerances for products — Part 2: Geometrical tolerances
ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
ISO/DIS 5459:2023 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO 2692:1988 Technical drawings; geometrical tolerancing; maximum material principle
ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
ISO 492:2014 Rolling bearings - Radial bearings - Dimensional and geometrical tolerances
ISO 8062-3:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
ISO 2768-2:1989 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications
ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
ISO 7083:2021 Technical product documentation — Symbols used in technical product documentation — Proportions and dimensions
ISO/TS 17863:2013 Geometrical product specification (GPS)-Geometrical tolerancing of moveable assemblies
ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 8062-3:2007/cor 1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings; Technical Corrigendum 1
ISO 5459:2011/DAmd 1 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems — Amendment 1
ISO 1101:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
ISO 2692:1988/Amd 1:1992 Technical drawings; geometrical tolerancing; maximum material principle; amendment 1: least material requirement
ISO/TR 5460:1985 Technical drawings; Geometrical tolerancing; Tolerancing of form, orientation, location and run-out; Verification principles and methods; Guidelines
ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 2692:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

Danish Standards Foundation, geometric tolerance

DS/ISO 5459:1982 Technical drawings. Geometrical tolerancing. Datums and datum systems for geometrical tolerances
DS/EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
DS/ISO 5458:1991 Technical drawings. Geometrical tolerancing. Positional tolerancing
DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
DS/EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
DS/ISO 2692:1991 Technical drawings. Geometrical tolerancing. Maximum material principle
DS 991:1985 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
DS/EN ISO 7083:1995 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
DS/EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DS/ISO 2768-2:1990 Technical drawing. General tolerances. part 2: Geometrical tolerances for features without individual tolerance indications
DS/EN 22768-2:1993 General tolerances. Part 2: Geometrical tolerances for features without individual tolerance indications
DS/ISO 2768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
DS/EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
DS/CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
DS/INF 28:1984 Geometricai tolerances — Verification principles and methods for tolerances of form, orientation, location and runout — Guidelines
DS/EN ISO 2692:2007 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
DS/ISO 2692:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
DS/EN ISO 2692:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)

German Institute for Standardization, geometric tolerance

DIN ISO 5459:1982 Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances
DIN EN ISO 1660:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017); German version EN ISO 1660:2017
DIN EN ISO 5458:1999 Geometrical product specification (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998
DIN EN ISO 5458:2018-11 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018); German version EN ISO 5458:2018
DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
DIN EN ISO 22081:2019 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
DIN EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
DIN EN ISO 1101:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 8062-3:2008 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
DIN ISO 7083:1984 Technical drawings; symbols for geometrical tolerancing; proportions and dimensions
DIN 7868-3:1986-06 Rubber and plastics covered rollers; dimensional and geometrical tolerances
DIN EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); English version of DIN EN ISO 8062-3:2007
DIN EN ISO 8062-3:2019 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019); German and English version prEN ISO 8
DIN EN ISO 1101:2008 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017); German version EN ISO 1660:2017
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 8062-1:2008-01 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
DIN CEN ISO/TS 8062-2:2014-03*DIN SPEC 91184:2014-03 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013
DIN EN ISO 8062-1:2008 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
DIN EN ISO 5459:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011); German version EN ISO 5459:2011
DIN EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 2692:2022-08 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021); German version EN ISO 2692:2021
DIN EN ISO 2692:2007 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006); English version of DIN EN ISO 2692:2007-04
DIN EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); English version of DIN EN ISO 1101:2006-02
DIN EN ISO 2692:2019 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO/DIS 2692:2019); German and English version prEN ISO 2692:2019
DIN EN ISO 1101:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012 + Cor. 1:2013); German version EN ISO 1101:2013

ZA-SANS, geometric tolerance

SANS 10111-2-2:1993 Engineering drawing Part 2: Geometrical tolerancing Section 2: Datums and datum-systems for geometrical tolerances
SANS 3302-2:2003 Rubber - Tolerances for products Part 2: Geometrical tolerances
SANS 10111-2-2,2-3+2-5:1993 Engineering drawing Part 2:Geometrical tolerancing
SANS 10111-2-4:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
SANS 10111-2-5:1993 Engineering drawing Part 2: Geometrical tolerancing Section 5: Fundamental tolerancing principle
SANS 10111-2-1:2007 Engineering drawing Part 2: Geometrical tolerancing Section 1: Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings
SANS 10111-3:1993 Engineering drawing Part 3: Guidelines for the interpretation and verification methods of geometrical tolerancing
SANS 10111-2-3:2008 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

International Commission on Illumination (CIE), geometric tolerance

CIE 176-2006 GEOMETRIC TOLERANCES FOR COLOUR MEASUREMENTS

Japanese Industrial Standards Committee (JISC), geometric tolerance

JIS B 0021:1984 Indications of geometrical tolerances on drawings
JIS B 0025:1991 Technical drawings -- Geometrical tolerancing -- positional tolerancing
JIS B 0025:1998 Technical drawings -- Geometrical tolerancing -- Positional tolerancing
JIS B 0022:1984 Datums and datum-systems for geometrical tolerances
JIS B 0021:1998 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out
JIS B 0023:1996 Technical drawings -- Geometrical tolerancing -- Maximum material requirement and least material requirement
JIS B 0419:1991 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications

Association Francaise de Normalisation, geometric tolerance

NF E04-556*NF EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
NF EN ISO 1660:2017 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Tolérancement des profils
NF T47-001-2*NF ISO 3302-2:2014 Rubber - Tolerances for products - Part 2 : geometrical tolerances
NF E04-559*NF EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
NF EN ISO 22081:2021 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécifications géométriques générales et spécifications de taille générales
NF E04-574:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
NF E04-555:1992 Technical drawings - Geometrical tolerancing - Maximum material principle
NF EN ISO 5458:2018 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécification géométrique de groupes d'éléments et spécification géométrique combinée
XP E04-553*XP ISO/TS 17863:2013 Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
XP ISO/TS 17863:2013 Spécification géométrique des produits (GPS) - Tolérancement géométrique des assemblages mobiles
NF E04-554:1988 Technical drawings. Dimensioning and tolerancing. Datums and datum-systems for geometrical tolerances.
NF EN ISO 1101:2017 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Tolérancement de forme, orientation, position et battement
NF E04-552*NF EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF F01-492-2:1993 Railway rolling stock. Glass bays. Part 2 : geometrical marges.
NF E82-201:1987 DROP FORGINGS OF COPPER AND COPPER ALLOYS. DIMENSIONAL AND GEOMETRICAL TOLERANCES.
NF EN ISO 5459:2011 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Références spécifiées et systèmes de références spécifiées
NF E04-554*NF EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems
NF E04-552:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF A00-510-3*NF EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings.
NF E02-350-2:1993 General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.
NF E04-552:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out.
NF E02-351:1993 General tolerances. Geometric tolerances of components without special tolerance indications. NF EN22768-2 Application Guide
NF E04-552:1983 Technical drawings. Geometrical tolerancing. Generalities, definitions, symbols, indications on drawings.
XP A00-510-2*XP CEN ISO/TS 8062-2:2014 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules
NF E04-555*NF EN ISO 2692:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
NF EN ISO 2692:2021 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Exigence du maximum de matière (MMR), exigence du minimum de matière (LMR) et exigence de réciprocité (RPR)
NF A00-510-1*NF EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary
NF E04-555:2007 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement.
NF E04-555:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

KR-KS, geometric tolerance

KS A ISO 1660-2020 Geometrical product specifications(GPS) — Geometrical tolerancing —Profile tolerancing
KS M ISO 3302-2-2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS B ISO 5458-2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification
KS B ISO 2692-1-2004 Technical drawings－Geometrical tolerancing－Maximum material principle
KS A ISO 7083-2019 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimension
KS A ISO 1101-2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101-2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS B ISO 2692-2-2004 Technical drawings－Geometrical tolerancing－Maximum material principle－Part 2：Least material requirement
KS B ISO 1101-2003 Technical drawings－Geometrical tolerancing－Tolerancing of form, orientation, location and run-out－Generalities, definitions, symbols, indications on drawings
KS B ISO 2692-2020 Geometrical product specifications(GPS) — Geometrical tolerancing — Maximum material requirement(MMR), least material requirement(LMR) and reciprocity requirement(RPR)

PL-PKN, geometric tolerance

PN M02168-02-1991 General tolerances Geometrical tolerances for features without individual tolerance indications
PN M01122-1993 Technical drawings. Geometrical tolerancing. Positional tolerancing
PN M01123-1993 Technical drawings. Geometrical tolerancing. Maximum material Principle
PN M01144-1992 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
PN-EN ISO 22081-2021-07 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- General geometrical specifications and general size specifications (ISO 22081:2021)
PN-EN ISO 2692-2021-09 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)

ES-UNE, geometric tolerance

UNE-EN ISO 5458:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
UNE-EN ISO 22081:2023 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
UNE-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)
UNE-EN ISO 2692:2023 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)

VN-TCVN, geometric tolerance

TCVN 7295-2003 Geometrical product specification (GPS).Geometrical tolerancing.Positional tolerancing
TCVN 2263-2-2007 General tolerances.Part2:Geometrical tolerances for features without individual tolerance indications
TCVN 7294-2-2003 General tolerances.Part 2: Geometrical tolerances for features without individual tolerance indications

YU-JUS, geometric tolerance

JUS ISO 5459:1992 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances
JUS ISO 7083:1992 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, geometric tolerance

GB/T 3672.2-2002 Rubber-Tolerances of products--Part 2: Geometrical tolerances
GB/T 6414-2017 Castings.Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 1958-2017 Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
GB/T 13319-2003 Geometrical product specifications(GPS) Geometrical tolerancing--Positional tolerancing
GB/T 17851-2022 Geometrical product specifications (GPS)—Geometrical tolerancing—Datums and datum systems
GB/T 17851-2010 Geometrical Product Specifications(GPS).Geometrical tolerancing.Datums and datum system
GB/T 1182-2008 Geometrical Product Specifications(GPS).Geometrical tolerancing.Tolerances of form,orientation,location and run-out
GB/T 42124.1-2022 Geometrical product specifications (GPS)—Dimensional and geometrical tolerances for moulded parts—Part 1:Vocabulary
GB/T 16671-2009 Geometrical Product Specifications(GPS).Geometrical tolerancing.Maximum material requirement(MMR),least material requirement(LMR)and reciprocity requirement(RPR)
GB/T 24734.10-2009 Technical product documentation.Digital product definition data practices.Part 10:Application for geometric tolerances

Lithuanian Standards Office , geometric tolerance

LST EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998)
LST EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
LST EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
LST EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
LST EN ISO 7083:2001 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)
LST EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
LST EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
LST EN 22768-2-2001 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
LST EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
LST EN ISO 2692:2007 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006)
LST EN ISO 2692:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)

Professional Standard - Automobile, geometric tolerance

QC/T 714-2023 Geometrical tolerance for sheet metal of auto body

European Committee for Standardization (CEN), geometric tolerance

EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
EN ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing ISO 5458:1998
EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and runout
EN 22768-2:1993 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out
CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
EN ISO 5459:2011/prA1 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems - Amendment 1 (ISO 5459:2011/DAM 1:2022)
EN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)

IT-UNI, geometric tolerance

UNI EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
UNI EN ISO 2692:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

CO-ICONTEC, geometric tolerance

ICONTEC 2130-1986

国家市场监督管理总局、中国国家标准化管理委员会, geometric tolerance

GB/T 17852-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Profile tolerancing
GB/T 39645-2020 Technical drawings—Symbols for geometrical tolerancing proportions and dimensions
GB/T 13319-2020 Geometrical product specifications (GPS)—Geometrical tolerancing—Pattern and combined geometrical specification
GB/T 1182-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out
GB/T 39741.2-2021 Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars
GB/T 16671-2018 Geometrical product specifications (GPS)—Geometrical tolerancing—Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

Indonesia Standards, geometric tolerance

SNI 05-1824-1990 Technical drawings - Geometrical tolerancing datums and datum systems for geometrical tolerances

IN-BIS, geometric tolerance

IS 10721-1983
IS 8000 Pt.3-1992
IS 11158-1984
IS 8000 Pt.2-1992 Technical drawings. Geometrical tolerancing. Part 2: Maximum material principles (First Revision)

CEN - European Committee for Standardization, geometric tolerance

EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out

Sichuan Provincial Standard of the People's Republic of China, geometric tolerance

DB51/T 1555-2012 Dimensional and geometric tolerance measurement methods for tooling for nuclear fuel assemblies

未注明发布机构, geometric tolerance

BS PD CEN ISO/TS 8062-2:2013(2015) Geometrical Product Specifications (GPS) — Dimensional and geometrical tolerances for moulded parts Part 2 : Rules
DIN EN ISO 2692:2022 Geometric Product Specification (GPS) – Geometric Tolerancing – Maximum Material Condition (MMR), Minimum Material Condition (LMR) and Reciprocity Condition (RPR) (ISO 2692:2021)

RU-GOST R, geometric tolerance

GOST R 53442-2015 Basic norms of interchangeability. Geometrical product specifications. Geometrical tolerancing. Tolerances of form, orientation, location and run-out