ZH
RU
ES
Titanium clip size
Titanium clip size, Total:500 items.
In the international standard classification, Titanium clip size involves: Machine tools, Machine tool systems, Hand-held tools, Leather technology, Chipless working equipment, Miscellaneous domestic and commercial equipment, Paper products, Cinematography, Products of non-ferrous metals, Bearings, Non-ferrous metals, Dentistry, Vacuum technology, Cutting tools, Pipeline components and pipelines, Industrial automation systems, Valves, Fasteners, Aerospace fluid systems and components, Internal combustion engines, Shafts and couplings, Medical equipment, Textile machinery, Materials for aerospace construction, Components for aerospace construction, Photography, Mining equipment, Fasteners for aerospace construction, Technical drawings, Fluid storage devices, Rotating machinery, Rails and railway components, Electromechanical components for electronic and telecommunications equipment, Equipment for the chemical industry, Fluid power systems, Glass, Aircraft and space vehicles in general, Welding, brazing and soldering, Electrical accessories, Linear and angular measurements, Reinforced plastics, Flexible drives and transmissions, Internal combustion engines for road vehicles, Insulation, Power transmission and distribution networks, Document imaging applications, Components for electrical equipment, Equipment for the rubber and plastics industries, Road vehicle systems.
CZ-CSN, Titanium clip size
Professional Standard - Machinery, Titanium clip size
RO-ASRO, Titanium clip size
- STAS 5754/1-1980 CLEVIS PINS WITH HEADS Dimensions
- STAS 12577-1987 COLLET CHUCKS Main dimensions
- STAS 5754/2-1980 CLEVIS PINS WITH SMALL HEADS Dimensions
- STAS 9616-1988 CLAMPS FOR STORAGE BATTERIES Dim ensions
- STAS 10006-1975 Motor vehicles PIPE CLIPS FOR EXHAUST SYSTEM Dimensions
- STAS 5814-1989 Rolling bearings CLAMPING SLEEVES Dimensions
- STAS 1658-1990 Taper shaft for drill chuck dimensions
- STAS 10129/3-1977 Motor vehicles PIPE CLAMPS, ONE-SIDED FASTENING Dimensions
- STAS 2242-1980 CHANNEL IRON CLAMPING PLATES FOR U AND I SECTIONS Dimensions
- STAS 9605-1974 TOOL-HOLDERS FOR MILLING MACHINES Types and basic dimensions
- STAS 1265-1980 MACHINE CHUCKING REAMERS WITH MORSE TAPER Di mensi ons
- STAS 8555-1991 Stamps and dies. Clamping tensons shapes and dimensions
- STAS 9573-1974 TOOL-HOLDERS FOR HORIZONTAL BROACHING MACHINES Types and basic dimensions
- STAS 9672-1974 TOOL-HOLDERS FOR TURNING LATHES Types and connecting dimensions
- SR ISO 5414/2:1993 Tool chueks (end mill holders) with clamp screws for flatted parallel shank tools - Part 2: Connecting dimensions of chuks
- STAS 9572-1974 TOOL HOLDERS FOR VERTICAL BORING AND TURNING MILLS Types and basic dimensions
- STAS 1264-1980 MACHINE CHUCKING REAMERS WITH PARALLEL SHANKS Dimensions
- STAS 9568-1974 TOOL-HOLDERS FOR TURRET LATHES Types and connecting dimensions
- STAS 8770-1970 Machine retaining devices COUNTERSUNK NUT FOR L-SHAPE CLIPS Dimensions
- STAS 8882-1971 Machine retaining devices. ADJUSTABLE HEAD REST BUTTON FOR CLAMPS. Dimensions
- STAS 12189/4-1984 FITTINGS OF UNPLASTICIZEI) POLYVINYL CHLORIDE FOK COMBINDKD .JOINT NP 100 Sockets Dimensions
- STAS 8157-1980 MORSE TAPER SHANK LONG TWIST DRILL FOR USE IN JIG BUSHER Dimensions
- STAS 5815-1991 Lockwashers and brackets for rolling bearing locknuts. Dimensions
Indonesia Standards, Titanium clip size
HU-MSZT, Titanium clip size
RU-GOST R, Titanium clip size
- GOST 2876-1980 Gripping collets. Basic and coupling dimensions
- GOST 8255-1986 Safety chucks. Basic dimensions
- GOST 18758-1980 Blank holders. Design and dimensions
- GOST 18767-1980 Holding down devices. Design and dimensions
- GOST 18759-1980 Roll holders. Design and dimensions
- GOST 18760-1980 Rollers for blank holders. Design and dimensions
- GOST 18763-1980 Block blank holders. Design and dimensions
- GOST 18765-1980 Spring blank holders. Design and dimensions
- GOST 18761-1980 Cylindrical blank holders. Design and dimensions
- GOST 26634-1991 Dental rotary instruments. Shanks
- GOST 18764-1980 Blade springs for block blank holders. Design and dimensions
- GOST 8522-1979 Drill three-jawed chucks with key. Basic dimensions
- GOST 26860-1993 Holders with clamp screw for flatted parallel shank end mills. Dimensions of the driving system of tool shanks
- GOST 18762-1980 Slide blocks for cylinder holders. Design and dimensions
- GOST 2877-1980 Push-out collets. Basic and coupling dimensions
- GOST 13058-1967 Holders for disk cutters to lathes. Design and dimensions
- GOST 21080-1975 Pads for fixing details of metal casting patterns. Dimensions
- GOST 21941-1976 Die chucks for turret lathes. Design and dimensions
- GOST 16254-1970 Chill moulds. Core removers (eccentric cramps). Construction and dimensions
- GOST 21099-1975 Rotating electrical machinery. Brush holders and brackets. Serrations on fixing surface. Shapes and dimensions
- GOST 21942-1976 Sleeves of die chucks for turret lathes. Design and dimensions
- GOST 24187-1980 Muffs. Design
- GOST 18074-1972 Arbors for the straight fixing of cutters and clamping bushing for turret lathes. Design and dimensions
- GOST 17179-1971 Turret lathe with cylindrical collets. Design and dimensions
- GOST 28435-2015 End mills with mechanically clamped indexable in serts. Dimensions
- GOST 13014-1980 Clamping sleeves of rolling bearings. Basic dimensions
- GOST 26612-1985 Boring tools with clamped shangeable inserts pressed from the top. Design and dimensions
- GOST 17529-1972 Spindle cam arbors with pneumatic clamp. Design and dimensions
- GOST 17531-1972 Flanged cam arbors with pneumatic clamp. Design and dimensions
- GOST 18069-1972 Clamping bushings with a slider for tools with a cylindrical tail. Design and dimensions
- GOST 19993-1974 Core removing disk-type attachments for wax-pattern dies. Design and dimensions
- GOST 21300-1975 Centring joinings with clamps for heated core boxes. Design and dimensions
- GOST 21301-1975 Guide joinings with clamp for heated core boxes. Design and dimensions
- GOST 24808-1981 Brush holders and brackets for traction and electrical machines. Serrate rifling. Dimensions
- GOST 24900-1981 Straight shauks of holders for NC-lathe. Basic dimensions
- GOST 26595-2014 Face milling cutters with mechanically clamped indexable inserts. Basic dimensions
- GOST 28979-1991 Tool blacks for parting and grooving blades. Basic dimensions
- GOST 17020-1978 Clamps, holders and belts for fixing of pipelines and cables. Design and sizes
- GOST 28101-2015 Boring tools with mechanically clamped indexable insert. Types and dimensions
- GOST 13059-1967 Holders for disk cutters with self-adjustments to lathe. Design and dimensions
- GOST 13154-1967 Floating clamps for machine retaining devices. Design and dimensions
- GOST 15073-1975 Clamping nuts for tool holders for horisontal milling machines. Design and dimensions
- GOST 19994-1974 Core removing rack-type attachments for wax-pattern dies. Design and dimensions
- GOST 24562-1981 Sheet stamping dies. Straps for guide bushes. Design and dimensions
- GOST 26611-1985 Straigh luming undercutting and coping tool holders with clamped changeable inserts pressed from the top. Desing and dimensions
- GOST 26234-1984 Normal and high precision renewable jig bushes. Design and dimensions
- GOST 26294-1984 Normal and high precision renewable jig bushes. Design and dimensions
- GOST 26232-1984 Fixed type normal and hign precision jig bushes. Design and dimensions
- GOST 13156-1967 Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions
- GOST 16256-1970 Chill moulds. Eccentric core removers. Construction and dimensions
- GOST 16258-1970 Chill moulds. Hydraulic core removers. Construction and dimensions
- GOST 16259-1970 Chill moulds. Pneumatic core removers. Construction and dimensions
- GOST 17180-1971 Turret lathe collets with eccentrically positioned cylindrical hole. Design and dimensions
- GOST 17186-1971 Turret lathe collets with rib and inclined hole. Design and dimensions
- GOST 19914-1974 Holders with a cylindrical shank for angled holding of a tool for turred-lathes. Design and dimensions
- GOST 20317-1974 Disk type milling cutters for cutting plastics textolite type. Construction and dimensions
- GOST 21130-1975 Electrical items. Earth terminals and earth signs. Design and dimensions
- GOST 21190-1975 Roll supports for automatic turret lathe holders. Design and dimensions
- GOST 21200-1975 Support holders for tangential cutters of turret lathes. Design and dimensions
- GOST 16257-1970 Chill moulds. Rack core removers. Construction and dimensions
- GOST 17181-1971 Turret lathe collets with inclined cylindrical hole. Design and dimensions
- GOST 19913-1974 Holders with a cylindrical shank for right-angle holding of a tool for turret-lathes. Design and dimensions
- GOST 21189-1975 Prismatic supports for automatic lathe holders. Design and dimensions
- GOST 21201-1975 Support holders for skew clamping of turret lathe cutters. Design and dimensions
- GOST 24340-1980 Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions
- GOST 24344-1980 Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions
- GOST 25444-1990 Straight electrodes and electrode adapters for resistance spot welding. Taper fits. Dimensions
- GOST 26595-1985 Face milling cutters with mechanically clamped indexable inserts. Types and basic dimensions
- GOST 26233-1984 Fixed type normal and high precision collar jig bushes. Design and dimensions
SE-SIS, Titanium clip size
German Institute for Standardization, Titanium clip size
- DIN 821-1:1992 Files and folders; dimensions
- DIN 65174:1991 Aerospace; round bars of titanium and titanium alloys; dimensions, masses
- DIN 65174:1991-01 Aerospace; round bars of titanium and titanium alloys; dimensions, masses
- DIN 65250:1989-08 Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses
- DIN 3016-3:2000 Fastening clamps - Part 3: Section clamps and flange dimensions
- DIN 6341-2:1993-10 Draw-in collets; thread of the collets; nominal size, limit deviations
- DIN 115-2:1973-09 Driving components, ring for clamp couplings, dimensions
- DIN 115-2:1973 Driving components, ring for clamp couplings, dimensions
- DIN ISO 5745:2006 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values (ISO 5745:2004) English version of DIN ISO 5745:2006-09
- DIN 3021-1:2023-06 Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types
- DIN 13181-2:1973 Medical instruments; McKenzie's instruments for brain clips, clips and fitting dimensions
- DIN 115-1:1973 Driving components; clamp couplings, dimensions, twisting
- DIN 64597:1977 Case profiles for glued reeds; inter-related dimensions
- DIN ISO 15488:2006 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003);English version of DIN ISO 15488:2006-01
- DIN 65250:1989 Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses
- DIN 20361:2010 Rock drilling - Chuck bushings - Connecting dimensions, material, design
- DIN 5005:1991 Sheets for loose leaf binders; dimensions for standard punching for paper sizes A4 and A5
- DIN 20361:1992 Rock drilling; chuck bushings; connecting dimensions, material, design
- DIN EN 2617:2003 Aerospace series - Plates in titanium and titanium alloys, thickness 6 mma100 mm - Dimensions; German and English version EN 2617:2001
- DIN EN 4267:2003 Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm D 160 mm; Dimensions; German and English version EN 4267:2001
- DIN EN 4115:2010-10 Aerospace series - Cushion, rubber for clamps - Dimensions, masses; German and English version EN 4115:2010
- DIN 43160:1968-01 Eye and clevis for overhead equipment; connecting dimensions
- DIN 3021-1:1999 Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types
- DIN 3021-1:2016 Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types
- DIN 6370:1957 Clamping Devices; Machine Vices, Capacities, Mating Dimensions, Permissible Variations, Jaws
- DIN 5906:1995 Short clips for grooveless flat bottom rails - Dimensions, steel types
- DIN EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2020
- DIN 28152-1:2021 Clamps for glass lined vessels - Part 1: Dimensions, assignment
- DIN EN 4234:2020-09 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2020
- DIN 28152-1:2021-09 Clamps for glass lined vessels - Part 1: Dimensions, assignment
- DIN 65197:1989-08 Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
- DIN 65471:1991 Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses
- DIN EN 4234:2007 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2006
- DIN VDE V 0212-474:2012 Fittings for overhead lines - Tongue and clevis - Dimensions of couplings
- DIN ISO 5749:2006 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
- DIN 13181-2:2013 Medical instruments.Instruments for brain clips type McKenzie.Part 2: Clip and fitting dimensions
- DIN 65471:1991-01 Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses
- DIN EN 4180:2003 Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances; Diameter 4 mm D 40 mm; Dimensions; German and English version EN 4180:2001
- DIN EN 2339:2003 Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001
- DIN 28152-1:1999 Clamps for glass lined vessels - Part 1: Dimensions, assignment
- DIN 8152-2:1980 Leaf chains; clevises and sheaves for light series LL, connecting dimensions
- DIN ISO 5748:2006 Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004) English version of DIN ISO 5748:2006-09
- DIN 5906:1995-11 Short clips for grooveless flat bottom rails - Dimensions, steel types
- DIN 69063-5:2006 Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5; connecting dimensions
- DIN 19063-2:1989 Microfilm jacket; size 105 mm × 148 mm (A6); dimensions
- DIN 5005:2008 Paper and board - Sheets for loose leaf binders - Dimensions for standard punching for paper sizes A4 and A5
- DIN 821-2:1973 Files and folders; filing holes for letters and documents; dimensions and disposition
- DIN 43043-2:1971 Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions
- DIN ISO 5746:2006 Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values (ISO 5746:2004) English version of DIN ISO 5746:2006-09
- DIN 55029:1980 Machine Tools; Spindle Noses and Face Plates with Centering Taper; Camlock Type, Accessories; Dimensions
- DIN EN 2363:1989 Aerospace series; locking clips for turnbuckles of control cables; dimensions
International Organization for Standardization (ISO), Titanium clip size
- ISO 623:1974 Paper and board; Folders and files; Sizes
- ISO 5611:1995 Cartridges, type A, for indexable inserts - Dimensions
- ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- ISO 5745:1988 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- ISO 1793:1975 Cinematography; Reels for 16 mm motion-picture projectors (up to and including 120 m capacity : 18 cm size); Dimensions
- ISO 8177:1985 Aerospace - Omega clamps (saddle clamps) for fluid tubing installations - Dimensions
- ISO 7315:1985 Aerospace — "P" clamps (loop clamps) for fluid tubing installations — Dimensions
- ISO 8177:2021 Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
- ISO 2861:2020 Vacuum technology — Dimensions of clamped-type quick-release couplings
- ISO 15488:2003 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions
- ISO 15488:1996 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions
- ISO 9962-3:1994 Manually operated draughting machines - Part 3: Dimensions of scale rule chuck plates
- ISO 1793:2005 Cinematography - Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) - Dimensions
- ISO 5745:1982 Pliers and nippers — Pliers for gripping and manipulating — Dimensions
- ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values
- ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- ISO 5749:1988 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- ISO 5748:1988 Pliers and nippers - End cutting nippers - Dimensions and test values
- ISO 9343:1988 Pliers and nippers - Slip joint pliers - Dimensions and test values
- ISO 8976:1988 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO 8976:2021 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO 5414-2:1982 Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools; Part 2 : Connecting dimensions of chucks
- ISO 2861-1:1974 Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type
- ISO 12543-5:2021 Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
- ISO 2861:2013 Vacuum technology-Dimensions of clamped--type quick-release couplings
- ISO 1180:1983/Add 1:1985 Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1
- ISO 3653:1978 Cinematography; Spindles for 8 mm Type S motion-picture projector reels/spools; Dimensions
- ISO 12543-5:1998 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
- ISO 9242:1988 Pliers and nippers - Construction worker's pincers - Dimensions and test values
- ISO 9243:1988 Pliers and nippers - Carpenter's pincers - Dimensions and test values
- ISO 5414-2:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation
- ISO 5746:2004 Pliers and nippers - Engineer's and "Lineman's" pliers - Dimensions and test values
- ISO 5746:1988 Pliers and nippers - Engineer's and lineman's pliers - Dimensions and test values
NL-NEN, Titanium clip size
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Titanium clip size
- GB/T 9218-2005 Reels for 35mm motion picture projectors-Dimensions
- GB/T 9218-1988 Reels for 35mm motion picture projectors--Dimensions
- GB/T 21113-2007 Reels for 16 mm motion picture projectors.Dimensions
- GB/T 16181-1996 Bursting disc devices--Type and outline dimensions of holders
- GB/T 6133.2-2006 Tool chucks for flated parallel shank tools.Part 2: Connecting dimensions of chucks and designation
- GB/T 25378-2010 Collets with 8°setting angle for tool shanks.Collets,nuts and fitting dimensions
- GB/T 4982-2003 Vacuum technology--Quick release couplings--Dimensions--Part 1:Clamped type
IN-BIS, Titanium clip size
European Association of Aerospace Industries, Titanium clip size
- AECMA PREN 2617-1986 Plate in Titanium and Titanium Alloys 5 Less Than Less Than or Equal to 100 mm Dimensions
- AECMA PREN 2617-1995 Aerospace Series Plate in Titanium and Titanium Alloys Thickness 6 mm Less Than a Less Than or Equal to 100 mm Dimensions Edition P 2
- AECMA PREN 2903-1998 Aerospace Series Clamps Worm Drive Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4234]
- AECMA PREN 2904-1998 Aerospace Series Clamps - Saddle in Aluminium Alloy Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 3730]
- AECMA PREN 4115-1998 Aerospace Series Cushion, Rubber for Clamps Dimensions, Massess Edition P 1
- AECMA PREN 2905-1998 Aerospace Series Rubber Cushionings for Clamps Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4115]
- AECMA PREN 4234-2008 Aerospace series Clamps, worm drive Dimensions, masses Edition P 3
Association Francaise de Normalisation, Titanium clip size
- NF Q31-012:1980 Paper goods. Sizes of filing folders.
- NF E73-102*NF ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimension and test values
- NF ISO 15488:2004 Pinces de serrage avec angle de réglage de 8o pour queues d'outil - Pinces, écrous de serrage et dimensions d'assemblage
- NF L21-107:1975 Wires for rivets in T40 pure titanium. Dimensions.
- NF L15-135*NF EN 2617:2002 Aerospace series - Plates in titanium and titanium alloys - Thickness a more than or equal to 6 mm and less than or equal to 100 mm - Dimensions
- NF L15-316*NF EN 4267:2002 Aerospace series - Round bars in titanium and titanium alloys - Diameter D more than or equal to 6 mm and less than or equal to 160 mm - Dimensions
- NF E66-324:1986 Turning tools. Cutting off tool holders. Form and dimensions.
- NF ISO 8479:1988 Aéronautique et espace - Colliers à serrage central pour systèmes de fluides - Dimensions.
- NF EN 4234:2020 Série aérospatiale - Colliers à vis tangente - Dimensions, masses
- NF E62-513*NF ISO 15488:2004 Collets with 8o setting angle for tool shanks - Collets, nuts and fitting dimensions
- NF E62-513:1997 COLLETS WITH 8 DEGREES SETTING ANGLE FOR TOOL SHANKS. COLLETS, NUTS AND FITTING DIMENSIONS.
- NF E04-760-3:1994 Manually operated draughting machines. Part 3 : dimensions of scale rule chuck plates.
- NF ISO 10643:2010 Dimensions des équipements pour mandrins porte-fraises à entraînement par clavette et tenon
- NF ISO 7315:1989 Aéronautique et espace - Colliers en P pour systèmes de fluides - Dimensions d'encombrement.
- NF L46-211*NF ISO 8177:1988 Aerospace. Omega clamps (saddle clamps) for fluid systems. Dimensions.
- NF L46-210*NF ISO 7315:1989 Aerospace. "P" clamps (loop clamps) for fluid systems. Envelope dimensions.
- NF L46-228:2010 Aerospace series - Clamps, worm drive - Dimensions, masses.
- NF E73-109:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values.
- NF E73-108:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values.
- NF E73-104*NF ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- NF E73-105*NF ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- NF E73-109:1988 Pliers and nippers. Slip joint pliers. Dimensions and test values.
- NF E62-103:1991 Machine tools. Serrations for jaw chucks. Test dimensions. Assembly.
- NF E75-210:1988 Bonded abrasive products. Segment holder plates. Designation. Dimensions.
- NF L46-228*NF EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses
- NF ISO 10649-1:2014 Mandrins porte-fraise à entraînement par clavette et tenon - Partie 1 : dimensions générales
- NF L46-212*NF ISO 8479:1988 Aerospace. "Q clamps" (centre-mounted clamps) for fluid systems. Dimensions.
- NF ISO 5745:2004 Pinces et tenailles - Pinces de serrage et de manipulation - Dimensions et valeurs d'essai
- NF EN IEC 60471:2020 Assemblages à chape et tenon des éléments de chaînes d'isolateurs - Dimensions
- NF ISO 3937-1:2009 Mandrins porte-fraise à entraînement par tenons - Partie 1 : dimensions des cônes Morse
- NF P78-211-5*NF EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5 : dimensions and edge finishing
- NF EN ISO 12543-5:2021 Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 5 : dimensions et façonnage des bords
- NF E62-520:2003 Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools - Dimensions of chucks with 7/24 taper shank
- NF E29-727:2013 Vacuum technology - Dimensions of clamped-type quick-release couplings
- NF E73-115*NF ISO 9242:1988 Pliers and nippers. Construction worker'S pincers. Dimensions and test values.
- NF E73-114*NF ISO 9243:1988 Pliers and nippers. Carpenter'S pincers. Dimensions and test values.
- NF E73-108:1988 PLIERS AND NIPPERS. MULTIPLE SLIPS JOINT PLIERS. DIMENSIONS AND TEST VALUES.
- NF ISO 2982-1:2013 Roulements - Accessoires - Partie 1 : dimensions des manchons de serrage et de démontage
- NF EN 4115:2010 Série aérospatiale - Profilé en élastomère pour colliers - Dimensions, masses
- NF EN 2355:1989 Embouts à chape pour tendeurs en acier résistant à la corrosion - Dimensions et charges
- NF EN 2356:1989 Embouts à chape de tendeurs pour roulements en acier résistant à la corrosion - Dimensions et charges
- NF ISO 3937-2:2009 Mandrins porte-fraise à entraînement par tenons - Partie 2 : dimensions des cônes 7/24
- NF EN 4424:2006 Série aérospatiale - Embouts réglables à chape simple et à tige filetée à implantation : 1,5 x diamètre filetage en alliages de titane - Dimensions et charges
- NF EN 3730:2010 Série aérospatiale - Colliers du type "Oméga" avec serrage ou coulissants en alliage d'aluminium avec profilé en élastomère - Dimensions, masses
- NF L15-675*NF EN 4180:2002 Aerospace series - Circular tubes, fir fluid in titanium alloys - Wide tolerances - Diameter 4 mm inferior or equal to D inferior or equal to 40 mm - Dimensions
- NF L46-241*NF EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- NF L15-130:1958 Semi-finished products made of metal or non-ferrous alloys. Titanium sheet, dimensions and tolerances.
- NF E73-103:2004 Pliers and nippers - Engineer's and "lineman's" pliers - Dimensions and test values.
Taiwan Provincial Standard of the People's Republic of China, Titanium clip size
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Titanium clip size
- PREN 2617-1986 Plate in Titanium and Titanium Alloys 5 Less Than Less Than or Equal to 100 mm Dimensions
- PREN 4234-1995 Aerospace Series Clamps@ Worm Drive Dimensions - Mass
- PREN 4115-2008 Aerospace series Cushion@ rubber for clamps Dimensions@ masses (Edition P 2)
- PREN 4234-2005 Aerospace Series Clamps@ Worm Drive Dimensions@ Massess (Edition P 2)
- PREN 2903-1998 Aerospace Series Clamps Worm Drive Dimensions - Masses (Issue P 2)
- PREN 4234-2013 Aerospace series Clamps@ worm drive Dimensions@ masses (Edition P 4)
- PREN 4234-1998 Aerospace Series Clamps@ Worm Drive Dimensions@ Massess (Edition P 1)
- PREN 4234-2008 Aerospace series Clamps@ worm drive Dimensions@ masses (Edition P 3)
- PREN 4234-2018 Aerospace series - Clamps@ worm drive - Dimensions@ masses (Edition P 5)
British Standards Institution (BSI), Titanium clip size
- BS ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- BS M 66:1987 Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
- BS ISO 1793:2005 Cinematography - Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) - Dimensions
- BS ISO 2861:2013 Vacuum technology. Dimensions of clamped-type quick-release couplings
- BS ISO 2861:2020 Tracked Changes. Vacuum technology. Dimensions of clamped-type quick-release couplings
- BS EN 2617:2001 Aerospace Series - Plates in titanium and titanium alloys - Thickness 6 mm a 100 mm - Dimensions
- BS M 61:1989 Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems
- BS EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm - Dimensions
- BS ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values
- BS ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- BS ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- BS ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- BS EN 4234:2020 Aerospace series. Clamps, worm drive. Dimensions, masses
- BS EN 4267:2001 Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm D 160 mm - Dimensions
- BS EN ISO 12543-5:2011 Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
- BS M 64:1987 Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
- BS EN 4234:2006 Aerospace series - Clamps, worm drive - Dimensions, masses
- BS EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm a 6 mm - Dimensions
- BS EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- BS EN 4234:2015 Aerospace series. Clamps, worm drive. Dimensions, masses
- BS ISO 12251:2011 Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions
- BS EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- 17/30362517 DC BS EN 4234. Aerospace series. Clamps, worm drive. Dimensions, masses
- BS EN ISO 12543-5:2021 Tracked Changes. Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
- BS ISO 5746:2004 Pliers and nippers - Engineer's and "Lineman's" pliers - Dimensions and test values
国家市场监督管理总局、中国国家标准化管理委员会, Titanium clip size
- GB/T 38982-2020 Method of measuring shape and dimension for wrought titanium and titanium alloy products
- GB/T 39799-2021 Dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires
VN-TCVN, Titanium clip size
- TCVN 4277-1986 Self-centering three jawed chucks.Basic dimensions
- TCVN 4278-1986 Intermediate flanges for self-centering chucks.Design and dimensions
- TCVN 7364-5-2004 Glass in building.Laminated glass and laminated safety glass.Part 5: Dimensions and adge finishing
YU-JUS, Titanium clip size
Korean Agency for Technology and Standards (KATS), Titanium clip size
Japanese Industrial Standards Committee (JISC), Titanium clip size
- JIS B 4237:1987 Dimensions of pull and follower ends of broach
- JIS B 8365:1988 Dimensions of clamped-type vacuum couplings
- JIS B 8387:2000 Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions
American National Standards Institute （ANSI), Titanium clip size
- ANSI/ISA S75.08-1985 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
- DIN 3021-1:2023 Schlauchschellen - Federbandschellen (FBS) - Teil 1: Maße, Bezeichnung, Werkstoffe, Ausführung
- ANSI/I3A IT4.23-2001 Photography (Processing) – Roll and Dental Films – Film Clips and Hangers – Bite Dimensions
- ANSI/NAPM IT4.23-1996 Photography (Processing) - Roll and Dental Films - Film Clips and Hangers - Bite Dimensions
- ANSI/ISA 75.10.02-2014 Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
- ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures
PL-PKN, Titanium clip size
- PN L01470-1993 Aerospace. "Q" clamps (centre-mounted clamps) for fluid systems. Dimensions
- PN L01450-1992 Aerospace. Omega clamps (saddle clamps) for fluid systems. Dimensions
- PN L01462-1992 Aerospace. "P" clamps (loop clamps) for fluid systems. Envelope dimensions
- PN-EN 4234-2020-12 E Aerospace series -- Clamps, worm drive -- Dimensions, masses
- PN M73278-1992 Hydraulic fluid power. Four-port modular stack valves and four-port directicnal control valves, sizes 03 and 05. Clamping dimensions
- PN M73776-1988 Pneumatic fluid power Rod end clevis of piston rods of cylinders Mounting dimensions
ISA - International Society of Automation, Titanium clip size
- ISA S75.08-1985 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
- ISA 75.10.02-2014 Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
BR-ABNT, Titanium clip size
AT-ON, Titanium clip size
- ONORM ISO 5611:1991 Cartridges, type A, for indexable inserts; dimensions; marking of conformity
IT-UNI, Titanium clip size
- UNI ISO 2861:2020 Vacuum technology -- Dimensions of clamped-type quick-release couplings
Professional Standard - Railway, Titanium clip size
IX-UIC, Titanium clip size
European Committee for Standardization (CEN), Titanium clip size
- EN 2617:2001 Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm <= a <= 100 mm; Dimensions
- EN 2363:1989 Locking Clips for Turnbuckles of Control Cables Dimensions
- EN 4267:2001 Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm <= D <= 160 mm; Dimensions
- EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm <= a <= 6 mm; Dimensions
- EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm <= a <= 6 mm; Dimensions
- EN 4115:2001 Aerospace Series - Cushion, Rubber for Clamps - Dimensions, Masses
- EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- EN 4234:2015 Aerospace series - Clamps, worm drive - Dimensions, masses
- EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
- EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
- EN 4180:2001 Aerospace series - Circular tubes for fluids in titanium and titanium alloys - Wide tolerances; Diameter 4 mm <= D <= 40 mm; Dimensions
AENOR, Titanium clip size
- UNE 16710:1986 MACHINED PLATES FOR PRESS TOOLS, MOULDS, JIGS AND FIXTURES - NOMINAL DIMENSIONS.
- UNE 21128:1980 DIMENSIONS OF CLEVIS AND TONGUE COUPLINGS OF STRING INSULATOR UNITS.
- UNE 21128/1M:2000 Dimensions of clevis and tongue coupling of string insulators units.
Danish Standards Foundation, Titanium clip size
- DS/EN 2617:2001 Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm < a < 100 mm - Dimensions
- DS/EN 4267:2001 Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm
- DS/EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- DS/EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- DS/EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm < a < 6 mm - Dimensions
- DS/EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm < a < 6 mm - Dimensions
- DS/EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
- DS/EN IEC 60471:2020 Clevis and tongue couplings of string insulator units – Dimensions
- DS/EN 4180:2002 Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances - Diameter 4 mm < D < 40 mm - Dimensions
- DS/EN 2354:1989 Aerospace series. Eye-ends. Threaded. Control cable in corrosion resisting steel. Dimensions and loads
- DS/EN 2355:1989 Aerospace series. Fork-ends. Threaded. Control cable in corrosion resisting steel. Dimensions and loads
Lithuanian Standards Office , Titanium clip size
- LST EN 2617-2003 Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm < = a < = 100 mm - Dimensions
- LST EN 4267-2003 Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm < = D < = 160 mm - Dimensions
- LST EN 4234-2010 Aerospace series - Clamps, worm drive - Dimensions, masses
- LST EN 4115-2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- LST EN 2339-2002 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm < = a < = 6 mm - Dimensions
- LST EN 2338-2002 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm < = a < = 6 mm - Dimensions
- LST EN 4180-2002 Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances - Diameter 4 mm < D < 40 mm - Dimensions
- LST EN 2363-2001 Aerospace series - Locking clips for turnbuckles of control cables - Dimensions
ES-UNE, Titanium clip size
- UNE-EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm <= a <= 6 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
- UNE-EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm <= a <= 6 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
- UNE-EN 2617:2001 Aerospace series - Plates en titanium and titanium alloys - Thickness 6 mm < a <= 100 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
- UNE-EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses (Endorsed by Asociación Española de Normalización in September of 2020.)
- UNE-EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses (Endorsed by AENOR in May of 2010.)
- UNE-EN IEC 60471:2021 Clevis and tongue couplings of string insulator units - Dimensions
- UNE-EN ISO 12543-5:2022 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
- UNE-EN 4180:2001 Aerospace series- Circular tubes, for fluids in titanium and titanium alloys- Wide tolerances- Diameter 4 mm <D<40 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
BE-NBN, Titanium clip size
Professional Standard - Coal, Titanium clip size
- MT/T 117-2005 Cable protected clamp for shearer-Type and dimension
Professional Standard - Electron, Titanium clip size
- SJ 2225-1982 Types and dimensions for serialized medium-sized combination jigs
- SJ 2226-1982 Types and dimensions for combination jigs--Small series
- SJ/T 10161.3-1991 Vacuum rubber seal plane flanges.Dimensions of clamping flanges
Society of Automotive Engineers (SAE), Titanium clip size
- SAE AS46783-1-1982 AS46783 Clamp Loop, Aluminium Alloy Fluorosilicone Rubber Cushion (Imperial Dimensions)
- SAE AS46782-2-2004 AS46782 Clamp Loop, Corrosion Resistant Steel Fluorosilicone Rubber Cushion (Imperial Dimensions)
American Society of Mechanical Engineers (ASME), Titanium clip size
Standard Association of Australia （SAA）, Titanium clip size
- AS/NZS 4056.4:1992 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- AS/NZS 4056.7:1992 Pliers and nippers - End cutting nippers - Dimensions and test values
- AS/NZS 4056.8:1992 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- AS/NZS 4056.12:1992 Pliers and nippers - Slip joint pliers - Dimensions and test values
- AS/NZS 4056.9:1992 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
Aerospace, Security and Defence Industries Association of Europe (ASD), Titanium clip size
- ASD-STAN PREN 2617-1995 Aerospace Series Plate in Titanium and Titanium Alloys Thickness 6 mm Less Than a Less Than or Equal to 100 mm Dimensions (Edition P 2)
- ASD-STAN PREN 4267-1996 Aerospace Series Round Bar in Titanium and Titanium Alloys Diameter 6 mm Less Than or Equal to D Less Than or Equal to 160 mm Dimensions (Edition P 1)
- ASD-STAN PREN 2338-1983 Sheets, Titanium and Titanium Alloys Hot Rolled Thickness 0,8 mm Less Than or Equal to a Less Than or Equal to 5 mm Dimensions Aerospace Series (Edition 1)
- ASD-STAN PREN 2339-1983 Sheets, Titanium and Titanium Alloys Cold Rolled Thickness 0,2 mm Less Than or Equal to a Less Than or Equal to 3 mm Dimensions Aerospace Series (Edition 1)
- ASD-STAN PREN 2340-1997 Round Bars Titanium and Titanium Alloys Diameter 12 mm Less than or Equal to D Less than or Equal to 80 mm Dimensions Aerospace Series (Edition 2; PREN 4267)
- ASD-STAN PREN 3202-1989 Aerospace Series T-Head Bolt Traps Design Dimensions (Issue P 1)
- ASD-STAN PREN 4115-2008 Aerospace series Cushion, rubber for clamps Dimensions, masses (Edition P 2)
- ASD-STAN PREN 4234-2013 Aerospace series Clamps, worm drive Dimensions, masses (Edition P 4)
Professional Standard - Aerospace, Titanium clip size
- QJ 1147-1987 Types and dimensions of hand taps for processing Tc titanium alloys
Instrument Society of America (ISA), Titanium clip size
- ISA 75.08-1999 Installed Face-To-Face Dimensions for Flanged Clamp or Pinch Valves Formerly ANSI/ISA - S75.08 - 1999
CEN - European Committee for Standardization, Titanium clip size
- EN 4234:2006 Aerospace series - Clamps@ worm drive - Dimensions@ masses
CH-SNV, Titanium clip size
TH-TISI, Titanium clip size
- TIS 130-1975 Standard for sizes of folders files and suspended filing pockets
American Society for Testing and Materials (ASTM), Titanium clip size
- ASTM D6772/D6772M-22 Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM D6772/D6772M-15 Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM D6772/D6772M-16 Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM D6772-02 Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM D6772-02(2007) Standard Test Method for Dimensional Stability of Sandwich Core Materials
European Committee for Electrotechnical Standardization（CENELEC）, Titanium clip size
KR-KS, Titanium clip size
International Electrotechnical Commission (IEC), Titanium clip size
- IEC 60471:2020 Clevis and tongue couplings of string insulator units - Dimensions
PK-PSQCA, Titanium clip size
- PS 807-1979 SPECIFICATION FOR PAPER AND BOARD SIZES OF FOLDERS AND FILES (1ST REVISION)
ECIA - Electronic Components Industry Association, Titanium clip size
- 507-1983 Dimensional Characteristics Defining Edge Clips for Use with Hybrids and Chip Carriers
ZA-SANS, Titanium clip size
- SANS 4347:2006 Leaf-chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths
Canadian General Standards Board （CGSB), Titanium clip size
Professional Standard - Automobile, Titanium clip size