ZH
RU
ES
lower load
lower load, Total:99 items.
In the international standard classification, lower load involves: Refrigerating technology, Mechanical testing, Iron and steel products, Internal combustion engines for road vehicles, Power transmission and distribution networks, Cases. Boxes. Crates, Switchgear and controlgear, Electrical engineering in general, Ergonomics, Power stations in general, Space systems and operations, Protection against fire, Elements of buildings, Fasteners, Lubricants, industrial oils and related products, Analytical chemistry, Protection of and in buildings, Installations in buildings, Components for aerospace construction, Rubber, Electromechanical components for electronic and telecommunications equipment, Construction materials, Electrical wires and cables, Resistors, Tyres, Special purpose vehicles, Electrical accessories.
PK-PSQCA, lower load
- PS 345-1963 Diesel Fuel-(Low Speed Duty).
- PS 345-1978 SPECIFICATION FOR DIESEL FUEL OIL (LOW SPEED DUTY) (1ST REVISION)
GB-REG, lower load
- REG NASA-TN-D-1522-1962 Variable-amplitude fatigue tests with particular attention to the effects of high and low loads
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), lower load
- ASHRAE 4701-2004 A Comparison of Electrical- and Thermal-Load-Following CHP Systems
AASHTO - American Association of State Highway and Transportation Officials, lower load
Japanese Industrial Standards Committee (JISC), lower load
Korean Agency for Technology and Standards (KATS), lower load
- KS D ISO 13887:2004 Cold-reduced steel sheet of higher yield strength with improved formability
- KS D ISO 13887:2013 Cold-reduced steel sheet of higher yield strength with improved formability
- KS M ISO 27588:2010 Rubber, vulcanized or thermoplastic-Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
- KS M ISO 27588:2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
American National Standards Institute （ANSI), lower load
- ANSI/SAE J1253-1993 Low Temperature Cranking Load Requirements of an Engine
- ANSI/ASHRAE/ACCA 183-2007 Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings
- ANSI/IEEE C62.62:2010 Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
SAE - SAE International, lower load
- SAE J1253-1986 Low Temperature Cranking Load Requirements of an Engine
- SAE J1253-1979 Low Temperature Cranking Load Requirements of an Engine
- SAE J3006-2020 Low-duty Inertia Dynamometer Hydraulic Brake Wear Test Procedures for Vehicles Above 4536 kg (10 000 lb) of GVWR
- SAE J3006-2014 Low-duty Inertia Dynamometer Hydraulic Brake Wear Test Procedures for Vehicles Above 4536 kg (10 000 lb) of GVWR
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., lower load
- ASHRAE 4402-2000 Qualitative Comparison of North America and U.K. Cooling Load Calculation Methods (RP-942; The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 6@ Number 1@ Janu
- ASHRAE 4177-1998 Quantitative Comparison of North American and U.K. Cooling Load Calculation Procedures - Results (RP-942)
- ASHRAE 4176-1998 Quantitative Comparison of North American and U.K. Cooling Load Calculation Procedures - Methodology (RP-942)
- ASHRAE 183-2007 Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential buildings
- ASHRAE LV-11-C040-2011 Reducing Plug and Process Loads for a Large Scale@ Low Energy Office Building: NREL’s Research Support Facility
BE-NBN, lower load
AT-ON, lower load
Professional Standard - Electron, lower load
- SJ 737-1983 General specification for rotary wafer switches (low current rating)
- SJ 2688-1986 Rotary wafer switches (low current rating) with central mounting,without stop,maximum diameter 25mm,Type KX07
- SJ 738-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions:12;maximum diameter:40mm,Type KX03
- SJ 740-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions:12;maximum diameter:25mm,Type KX05
- SJ 2687-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 16mm,Type KX06
- SJ 2689-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 55mm,Type KX10
- SJ 2690-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 55mm,Type KX11
- SJ 2692-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 25mm,Type KX15
- SJ 2693-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 25mm,Type KX15
- SJ 2694-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 30mm,Type KX17
- SJ 119-1986 Rotary wafer switches (low current rating),with central mounting,maximum number of positions;12,maximum diameter:55mm,Type KX01
- SJ 739-1986 Rotary wafer switches(low current rating) with central mounting,maximum number of positions:12;maximum diameter:30mm,Type KX04
- SJ 2691-1986 Rotary wafer switches (low current rating) with cental mounting and two-hole positioning,maximum number of position,maximum diameter 42mm,Type KX13
Professional Standard - Electricity, lower load
- DL/T 1454-2015 Technical rules for power system automatic undervoltage load shedding in electric power systems
- DL 428-1991 Electric power system automatic under-frequency load-shedding Technical stipulation
- DL/T 428-2010 Technical rules for power system automatic under-frequency load shedding
- DL 497-1992 Rules of operational management of electric power system automatic under-frequency load-shedding
- DL/T 314-2010 General specifications for power system under-voltage load-shedding and separation equipment
- DL/T 315-2010 General specifications for power system under-frequency load-shedding and separation equipment
- DL/T 525-1993 Technical conditions for digital type frequency relay and automatic under-frequency load-shedding device
British Standards Institution (BSI), lower load
- BS EN 13199-2:2000 Packaging. Small load carrier systems. Column Stackable System (CSS)
- BS EN 13199-3:2000 Packaging. Small load carrier systems. Bond Stackable System (BSS)
- BS ISO 11228-3:2007 Ergonomics - Manual handling - Handling of low loads at high frequency
- BS EN 13199-1:2000 Packaging. Small load carrier systems. Common requirements and test methods
- BS EN ISO 7380-1:2022 Tracked Changes. Fasteners. Button head screws with reduced loadability. Hexagon socket button head screws
- BS EN ISO 7380-2:2023 Tracked Changes. Fasteners. Button head screws with reduced loadability. Hexagon socket button head screws with collar
- BS ISO 27588:2009 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
- BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
- 21/30397457 DC BS EN ISO 7380-1. Fasteners. Button head screws with reduced loadability. Part 1. Hexagon socket button head screws
- 21/30397460 DC BS EN ISO 7380-2. Fasteners. Button head screws with reduced loadability. Part 2. Hexagon socket button head screws with collar
CN-QIYE, lower load
- Q/GDW 586-2011 Technical specification for automatic low frequency load shedding of electric power system
- Q/GDW 587-2011 Technical specification for automatic low-voltage load shedding of electric power system
国家市场监督管理总局、中国国家标准化管理委员会, lower load
- GB/T 40588-2021 Technical provisions for automatic under-voltage load shedding in electric power systems
- GB/T 40596-2021 Technical rules for automatic under-frequency load shedding in electric power systems
Society of Automotive Engineers (SAE), lower load
- SAE J2438-2023 Low-Temperature Cranking Load Requirements of an Engine—Air Starter Method
NATO - North Atlantic Treaty Organization, lower load
- AEP-85-2016 Low Burden Chemical Biological Radiological and Nuclear (CBRN) Protective Clothing (ED A Ver 1)
European Committee for Standardization (CEN), lower load
- EN 16602-70-56:2015 Space product assurance - Vapour Phase Bioburden Reduction for Flight Hardware
- EN 4539-003:2010 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient
- EN 60947-3:1992 Low-voltage switchgear and controlgear; part 3: switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 947-3:1990, modified + Corrigendum December 1991)
- EN 4538-003:2010 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient
Yunnan Provincial Standard of the People's Republic of China, lower load
- DB53/T 947-2019 Technical requirements for comprehensive compensation device for unbalanced load of low-voltage power consumption
Group Standards of the People's Republic of China, lower load
- T/CEC 207-2019 Technical specifications for low-voltage phase-commutation switch-type load automatic balancing device
Sichuan Provincial Standard of the People's Republic of China, lower load
- DB51/T 1598.3-2023 Identification of causes of electrical fires in low-voltage lines Part 3: Overload
- DB51/T 1598.3-2013 Guidelines for identification of causes of electrical fires on low-voltage lines Part 3: Overload
American Society for Testing and Materials (ASTM), lower load
- ASTM E196-06 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM C857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-95(2001) Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-95 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-13 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-12a Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-16 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-11 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C857-07 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
International Organization for Standardization (ISO), lower load
- ISO 11228-3:2007 Ergonomics - Manual handling - Part 3: Handling of low loads at high frequency
- ISO 27588:2008 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
- ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
Association Francaise de Normalisation, lower load
Taiwan Provincial Standard of the People's Republic of China, lower load
- CNS 12213-1988 Method of Test for Performance of Gear Lugricants in Axles at High Speed, Low Torque, Followed by Low Speed, High Torque
German Institute for Standardization, lower load
- DIN EN 60947-3:2010 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008); German version EN 60947-3:2009
- DIN EN 4539-003:2011 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient; German and English vers
- DIN 45922-13:1979 Harmonized system of quality assessment for electronic components; sectional specification: low power single turn rotary potentiometers
- DIN ISO 27588:2014 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
Aerospace, Security and Defence Industries Association of Europe (ASD), lower load
- ASD-STAN PREN 4538-1-2001 Aerospace Series Bearings, Spherical Plain, in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Narrow Series Dimensions and Loads Metric Series (Edition P 1)
ES-AENOR, lower load
Defense Logistics Agency, lower load
- DLA QPL-13486-30-2006 CABLES, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR AND MULTIPLE CONDUCTOR, SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR
U.S. Air Force, lower load
- AIR FORCE A-A-58081 B-2010 TRUCK, LIFT, FORK, ELECTRIC, FRONT/SIDE LOADING, SIT-DOWN OPERATOR, 4,000 POUND CAPACITY, EE RATED
- AIR FORCE A-A-58086 A-2004 TRUCK, LIFT, FORK, ELECTRIC, SIT-DOWN, SOLID TIRES 3,000 POUND CAPACITY AT 24 INCH LOAD CENTER, 185 INCH MINIMUM LIFT
- AIR FORCE A-A-58087 A-2004 TRUCK, LIFT, FORK, ELECTRIC, NARROW AISLE REACH, STAND-UP OPERATOR, 3000 POUNDS CAPACITY AT 24 INCH LOAD CENTER, 205 INCH MINIMUM LIFT
CENELEC - European Committee for Electrotechnical Standardization, lower load
- EN 60947-3:1999 Low-Voltage Switchgear and Controlgear Part 3: Switches@ Disconnectors@ Switch-Disconnectors and Fuse-Combination Units
- EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches@ disconnectors@ switch-disconnectors and fuse-combination units (Incorporates Amendment A1: 2012)
RU-GOST R, lower load
- GOST R 50030.3-1999 Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units
- GOST R 54437-2011 Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
- GOST R 54437-2011(2019) Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests