ZH
RU
ES

How to fix the flange mount

How to fix the flange mount, Total:135 items.

In the international standard classification, How to fix the flange mount involves: Electrical accessories, Pipeline components and pipelines, Road vehicles in general, Electromechanical components for electronic and telecommunications equipment, Fasteners for aerospace construction, Air quality, Machine tools, Road vehicle systems, Chipless working equipment, Vacuum technology, Internal combustion engines for road vehicles, Shipbuilding and marine structures in general, Resistors, Farming and forestry, Earthworks. Excavations. Foundation construction. Underground works, Machine tool systems, Semiconductor devices, Fluid storage devices, Structures of buildings, Installations in buildings.

TR-TSE, How to fix the flange mount

TS 818-1971 FLANGES SECURED BY ROLLING

Defense Logistics Agency, How to fix the flange mount

DLA MS20756 REV D-2008 FLANGE, SWIVEL, RETAINING
DLA MS20756 REV E-2009 FLANGE, SWIVEL, RETAINING
DLA MS20756 REV F (1)-2012 FLANGE, SWIVEL, RETAINING
DLA MIL-DTL-24044/1 C-2011 FLANGES, FIXED, COAXIAL LINE, RIGID
DLA MS20757 REV C-2013 CONNECTOR, FIXED FLANGE, TO HOSE
DLA DSCC-DWG-89099 REV G-2005 RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS
DLA DSCC-DWG-89100 REV B-2002 SEMICONDUCTOR DEVICE, POWER SWITCHING REGULATOR ASSEMBLY

CZ-CSN, How to fix the flange mount

CSN 10 7221-1980 Fixed flanges for vacuum connections
CSN 69 0010 Cast.4.18-1990 Stationary pressure vessels. Technical ules. Design. Flanged connections

FI-SFS, How to fix the flange mount

U.S. Air Force, How to fix the flange mount

AIR FORCE MS20757 REV B-1975 CONNECTOR, FIXED FLANGE, TO HOSE

Korean Agency for Technology and Standards (KATS), How to fix the flange mount

KS B 1551-2003 Rigid flanged shaft couplings
KS R 1153-2012 Seat and seat anchorages test method

Association Francaise de Normalisation, How to fix the flange mount

NF E63-117:2008 Tools for pressing - Retainers for flanged punches - Reduced retainers
NF D62-100-2:2019 Furniture - Fixed base mezzanine beds - Part 2 : test methods
NF E63-108:2008 Tools for pressing - Square retainers and backing plates for flanged punches - Bottom fixing.
NF E63-114:2006 Tools for pressing - Square retainers and backing plates for flanged punches - Top fixing.
NF E63-113:2006 Tools for pressing - Rectangular retainers and backing plates for flanged punches - Top fixing.
NF E63-107:2008 Tools for pressing - Rectangular retainers and backing plates for flanged punches - Bottom fixing.
NF E63-107:1997 Press tools. Rectangular retainers and percussion plats for flanged punches. Bottom fixing.
NF E63-108:1997 Press tools. Square retainers and percussion plates for flanged punches. Bottom fixing.
NF EN 846-4:2002 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
NF EN 846-4/A1:2005 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
NF F56-331:1978 Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Flat steel clamp.
NF EN 3733-004:2008 Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 oC continu - Partie 004 : embase à collerette à fixation par quatre trous pour la fixation pour câble selon EN 4532 - ...
NF T58-202-4*NF EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.
NF P21-303:1993 Timber structures. Test methods. Determination of embedding strength and foundation values for dowel type fasteners.
NF E62-507-3:2009 Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools.
NF E62-507-3*NF ISO 12164-3:2015 Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools
NF E62-507-4:2009 Hollow taper interface with flange contact surface - Part 4 : dimensions of receivers for stationary tools.
NF E62-507-4*NF ISO 12164-4:2015 Hollow taper interface with flange contact surface - Part 4 : dimensions of receivers for stationary tools
NF R16-217:1986 Road vehicles. Single fuel filters with horizontal flanges and centre bolt fixing for compression ignition engines. Mounting and connecting dimensions.
NF EN 4645-003:2010 Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée, auto-freinante ferrule 1,25, équipés d'un porte sleeve démontable - Partie 003 : embase à fixation par collerette carrée - Norme produit
NF EN 4645-004:2010 Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée, auto-freinante ferrule 1,25, équipés d'une porte sleeve démontable - Partie 004 : embase à collerette ronde à fixation par écrou - Norme de produit
NF EN 3372-003:2008 Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 oC à 175 oC ou 200 oC continu - Partie 003 : embase à fixation par collerette carrée - Norme de produit

KR-KS, How to fix the flange mount

KS B 1551-2003(2023)

Professional Standard - Electron, How to fix the flange mount

SJ/T 10161.2-1991 Vacuum rubber seal plane flanges.Dimensions of fixed flanges
SJ 20106-1992 Detail Specification for Fixed Connectors,Electrical,Box Mounting Flange,Crimp Type,Bayonet Coupling，SeriesⅡ,Classes E and T，for JY 27513
SJ 50599/10-2006 Detail specification for fixed connectors, electrical, wall mounting flange, crimp type, bayonet coupling, series Ⅰ, for JY27466(classes T)
SJ 50599/11-2006 Detail specification for fixed connectors, electriclal, back panel, box mounting flange, crimp type, bayonet coupling, series Ⅰ,for JY27505(classes E)

German Institute for Standardization, How to fix the flange mount

DIN 86064:2013-01 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
DIN 86059:2013-01 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
DIN EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method; German version EN 1911:2010
DIN 86059:2013 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
DIN 86059:1976 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
DIN 86064:2013 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
DIN 86064:1976 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
DIN 47636-3:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector
DIN EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints; German version EN 12573-4:2000
DIN ISO 12164-3:2018-12 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
DIN ISO 12164-4:2018-12 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
DIN 47636-1:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing with mounting flange and eyelet-fastening for the separable connector
DIN ISO 12164-3:2018 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
DIN ISO 12164-3:2016 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
DIN ISO 12164-4:2018 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
DIN 47636-2:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing with mounting flange and screw-fastening for the separable connector
DIN 47636-4:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and screw-fastening for the separable connector
DIN ISO 12164-4:2016 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)

PL-PKN, How to fix the flange mount

PN H74302-1968 Pipelines and ?ixtures S?uds for flanged join?s
PN M43815-02-1986 Vacuum joints langes of bakable ixed joints
PN H74303-1968 Pipelines and fixtures High hexagon nuts for flanged join?s
PN H74301-1968 Pipelines and fixtures Bolts, hexagonal nu?s and dis?ance sleeves for flanged connec?ions Reauiremenfs

Society of Automotive Engineers (SAE), How to fix the flange mount

SAE AGS981-5-1975 AGS981 Female Flanges. (Bolted.) (Steel)
SAE AS4847-2004 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AS4847A-2012 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AS4847-1994 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard for
SAE AS4847A-2007 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AIR869B-2014 V-Couplings, Including V-Band and V-Retainer Coupling Assemblies, Flange and Seal Design, Application of

SAE - SAE International, How to fix the flange mount

SAE AS4847B-2018 Shank Nuts@ Captive Blind Fastener@ Mating Retaining Flange@ Design Standard For

Professional Standard - Machinery, How to fix the flange mount

JB/ZQ 4743-2006 Flange-fixed cylinder for metallurgical equipment (PN≤0.63MPa)

NO-SN, How to fix the flange mount

NS 2538-1982 Marine industry - Set-on flanges - Nominal pressure PN 16
NS 2537-1982 Marine industry - Set-on flanges - Nominal pressure PN 10

ES-UNE, How to fix the flange mount

SAE AS4847B-2023 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For

British Standards Institution (BSI), How to fix the flange mount

BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
BS ISO 12164-3:2008 Hollow taper interface with flange contact surface - Dimensions of shanks for stationary tools
BS ISO 12164-4:2014 Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools
BS ISO 12164-3:2014 Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools
BS ISO 12164-4:2008 Hollow taper interface with flange contact surface - Dimensions of receivers for stationary tools
BS 9526 N0002:1979 Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level

RU-GOST R, How to fix the flange mount

GOST 30676-2000 Circular grinding machines. Flanges for mounting of grinding wheels. Construction and dimensions
GOST 24934-1981 Vacuum equipment. Fixed screw flanges. Basic and allied dimensions
GOST 2829-1976 Spigot-mounted magnetos for automobiles and tractors. Fixing dimensions
GOST 28958-1991 Machinery for forestry. Disc trenchers. Disc-to-hub flange fixing dimensions
GOST 16195-1970 Blanks of male dies holders for wedged and flanged fixing of male dies of horizontal forging machines. Construction and dimensions
GOST 30988.2.6-2012 Plugs and socket-outlets for household and similar purposes. Part 2-6. Particular requirements for switched socket-outlets with interlock for fixed electrical installations and methods of tests

Professional Standard - Chemical Industry, How to fix the flange mount

HG/T 20635-2009 Specification for selection of steel pipe flanges,gaskets and bolting(Class designated)
HG 20614-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (European system)
HG 20614-1997 Steel pipe flanges, gaskets, fasteners optional regulations (European system)
HG 20635-1997 Steel pipe flanges, gaskets, fasteners optional regulations (American system)
HG 20635-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (American system)
HG/T 20614-2009 Specication for selection of steel pipe flanges,gaskets and bolting(PN designated)

CH-SNV, How to fix the flange mount

SNV 81161-1952 Technical drawings — Geometrical tolerancing Tolerancing of form, orientation, location and run-out Generalities, definitions, Symbols, indications on drawings
VSM 10855-1943
SNV 71755-1954
SN ISO 9004:1988 Quality management and quality System elements — Guidelines
VSM 18715-1965
VSM 13751-1967
SN 210 901/3-1983 Textile floor coverings - Suitability ranges

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to fix the flange mount

GB 15083-2006 Strength requirement and test of automobile seats their anchorages and any head restraints
GB/T 43079.2-2023 Regulations for the selection of steel pipe flanges, gaskets and fasteners Part 2: Class series
GB/T 43079.1-2023 Regulations for the selection of steel pipe flanges, gaskets and fasteners Part 1: PN series

国家市场监督管理总局、中国国家标准化管理委员会, How to fix the flange mount

GB 15083-2019 Strength requirement and test method of automobile seats,their anchorages and any head restraints

GOSTR, How to fix the flange mount

GOST 28262-1989 Uniform provisions concerning the approval of vehicles with regard to the strength of seats and their anchorages, and the characteristics of any head rest raints provided for the seats

Danish Standards Foundation, How to fix the flange mount

DS/ISO 6688:1983 Machinery for forestry. Disc trenchers. Disc-to-hub flange fixing dimensions
DS/EN 383:1993 Timber structures. Test methods. Determination of embedding strength and foundation values for dowel type fasteners

International Organization for Standardization (ISO), How to fix the flange mount

ISO 6688:1982 Machinery for forestry; Disc trenchers; Disc-to-hub flange fixing dimensions
ISO 12164-3:2014 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
ISO 12164-3:2008 Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
ISO 12164-4:2008 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
ISO 12164-4:2014 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools

American Society for Testing and Materials (ASTM), How to fix the flange mount

ASTM D4015-21 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices

US-CFR-file, How to fix the flange mount

CFR 33-150.915-2013 Navigation and navigable waters. Part150:Deepwater ports: operations. Section150.915:How are safety zones, no anchoring areas, and areas to be avoided established and modified?

European Committee for Standardization (CEN), How to fix the flange mount

EN 12573-4:2000 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints

Standard Association of Australia （SAA）, How to fix the flange mount

AS/NZS 3629.3:1997 Methods of testing child restraints - Dynamic testing of upper anchorage components
AS 3558.17:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of shower bases and shower modules
AS 3558.18:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of shower bases and shower modules

ES-AENOR, How to fix the flange mount

UNE 10-091-1985

Japanese Industrial Standards Committee (JISC), How to fix the flange mount

JIS B 6064-3:2013 Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
JIS B 6064-4:2013 Hollow taper interface with flange contact surface.Part 4: Dimensions of receivers for stationary tools

European Association of Aerospace Industries, How to fix the flange mount

AECMA PREN 3059-2001 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, with Flanged Alignment Housing, Cadmium Plated Dimensions and Loads Edition P 2
AECMA PREN 3059-1994 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, with Flanged Alignment Bush, Cadmium Plated Dimensions and Loads Edition P 1
AECMA PREN 3060-1994 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, Cadmium Plated, with Flanged Alignment Bush, Cadmium Plated Dimensions and Loads
AECMA PREN 3060-2001 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Steel, Cadmium Plated, with Flanged Alignment Housing, Cadmium Plated Dimensions and Loads Edition P 2
AECMA PREN 3061-1997 Aerospace Series Bearings, Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel, with Flanged Alignment Bush Dimensions and Loads Edition P 1

IX-EU/EC, How to fix the flange mount

REGULATION 14-2007 Regulation No 14 of the Economic Commission for Europe of the United Nations (UN/ECE) - Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages, Isofix anchorages systems and Isofix top tether anchorages (Acts adopted