ZH
RU
ES

mini gas tank

mini gas tank, Total:379 items.

In the international standard classification, mini gas tank involves: Equipment for petroleum and natural gas industries, Materials for aerospace construction, Energy and heat transfer engineering in general, Protective equipment, Fluid storage devices, Fibre optic communications, Organic chemicals, Capacitors, Road vehicle systems, Electronic tubes, Gas and steam turbines. Steam engines, Compressors and pneumatic machines, Cellular materials, Linear and angular measurements, Electronic components in general, Products of the chemical industry, Fluid power systems, Electrical accessories, Chipless working equipment, Microprocessor systems, Cans. Tins. Tubes, Aerosol containers, Special purpose vehicles, Particle size analysis. Sieving, Water quality, Geology. Meteorology. Hydrology, Petroleum products in general, Small craft, Air quality, Test conditions and procedures in general, Vibrations, shock and vibration measurements, Equipment for the chemical industry, Aerospace electric equipment and systems, Vocabularies, Measurement of volume, mass, density, viscosity, Integrated circuits. Microelectronics, Switchgear and controlgear, Power transmission and distribution networks, Aerospace fluid systems and components, Paints and varnishes, Wastes, Iron and steel products, Valves, Solar energy engineering, Wind turbine systems and other alternative sources of energy, Heat pumps, Elements of buildings, Motor cycles and mopeds.

International Organization for Standardization (ISO), mini gas tank

ISO 13689:2001 Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Microwave-type level gauge
ISO 3807:2013 Gas cylinders.Acetylene cylinders.Basic requirements and type testing
ISO/TR 11762:1992 Light-gauge metal containers; round open-top cans for liquid products with added gas; classification of can sizes by construction type
ISO/TS 21985:2022 Light gauge metal containers — Non-refillable LPG cartridges — General requirements
ISO 90-3:1986/Amd 1:1994 Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimensions of the top end of three-piece necked-in tinplate can
ISO 10692-2:2001 Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 2: Specification and type testing for valve to cylinder connections
ISO 11515:2013 Gas cylinders.Refillable composite reinforced tubes of water capacity between 450L and 3000L.Design, construction and testing
ISO 14451-4:2013 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators

Korean Agency for Technology and Standards (KATS), mini gas tank

KS M ISO 13689:2003 Refrigerated light hydrocarbon fluids-Measurement of liquid levelsin tanks containing liquefied gases-Microwave-type level gauge
KS M ISO 13689:2013 Refrigerated light hydrocarbon fluids-Measurement of liquid levelsin tanks containing liquefied gases-Microwave-type level gauge
KS M ISO 13689-2003(2008) Refrigerated light hydrocarbon fluids－Measurement of liquid levelsin tanks containing liquefied gases－Microwave-type level gauge
KS D ISO 10154-2004(2014) Light gauge metal containers－Three-piece necked-in tinplate aerosol cans－Dimensions of the top end
KS D ISO TR 11762:2004 Light－gauge metal containers－Round open－top cans for liquid products with added gas－Classification of can sizes by construction type
KS D ISO TR 11762:2019 Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type
KS D ISO 10654-2004(2019) Light-gauge metal containers－Round open-top cans－Cans for liquid products with added gas, defined by their nominal filling volumes
KS V ISO 15652-2006(2021) Small craft－Remote steering systems for inboard mini jet boats
KS D ISO 90-3:2004 Light gauge metal containers-Definitions and determination of dimensions and capacities-Part 3:Aerosol cans
KS D ISO 90-3-2004(2009) Light gauge metal containers－Definitions and determination of dimensions and capacities－Part 3：Aerosol cans
KS D ISO 90-3:2013 Light gauge metal containers－Definitions and determination of dimensions and capacities－Part 3：Aerosol cans
KS R ISO 7588-3-2003(2018) Road vehicles－Electrical/electronic switching devices－Part 3：Microrelays
KS B ISO 10692-2-2014(2019) Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections
KS C IEC 62257-9-2:2011 Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-2:Microgrids
KS D ISO TR 8610-2004(2009) Light gauge metal containers－Round vent-hole cans with soldered ends for milk and milk products－Capacities and related diameters
KS B ISO 10692-2:2014 Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections
KS B ISO 10692-2:2003 Gas cylinders-Gas cylinder valve connections for use in the micro-electronics industry-Part 2:Specification and type testing for valve to cylinder connections
KS C IEC 62257-9-1:2010 Recommendations for small renewable energy and hybrid systems for rural electrification－Part 9-1：Micropower systems

未注明发布机构, mini gas tank

BS ISO 13689:2001 Refrigerated light hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Microwave - type level gauge
BS ISO 10154:1991(2000) Light gauge metal containers — Three - piece necked - in tinplate aerosol cans — Dimensions ofthe top end
BS ISO 10654:1993(2000) Light gauge metal containers — Round open - top cans — Cans for liquid products with added gas, defined by their nominal filling volumes

United States Navy, mini gas tank

NAVY MIL-C-17671 F-1989 CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4
NAVY MIL-C-24382 A (1)-1990 CANISTER, OXYGEN BREATHING APPARATUS, TYPE A-4 TRAINING KIT
NAVY MIL-C-24382 A-1988 CANISTER, OXYGEN BREATHING APPARATUS, TYPE A-4 TRAINING KIT
NAVY MIL-PRF-81836/2 B-1998 FILTER, FLUID PRESSURE, HYDRAULIC, 5,000 PSI 3 MICRON ABSOLUTE, TYPE B, ELECTRICAL INDICATOR
NAVY QPL-81703-11-2010 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting
NAVY QPL-AS81703-2012 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting

Group Standards of the People's Republic of China, mini gas tank

T/CGAS 004-2018 Technical standard for gas supply by small propane tanks
T/CATSI 05004-2021 Small liquefied petroleum gas (commercial propane) storage tank
T/ZZB 1636-2020 Telecommunication microduct optical fibre cables for installation by blowing
T/SZBX 004-2021 Telecommunication microduct optical fibre cables for installation by blowing
T/ZZB 1298-2019 Reciprocating piston minitype air compressor
T/SXJP 005-2022 Micro Ambient Air Quality Monitor
T/ZZB 0072-2016 Refrigerant for automobile air conditioner 1,1,1,2—tetrafluoroethane (aerosol type)
T/ZZB 2000-2020 Pneumatic micro solenoid valve for textile machinery
T/CATSI 05005-2021 Small liquefied petroleum gas (commodity propane) car tanker with unloading pump
T/ACEF 040-2022 Self-cleaning lamellen microporous diffuser for water and wastewater treatment
T/CCGA 80001-2020 The packing technical requirements for road transportation of mini-cylinders
T/CSP 5-2019 Particle technology—Gas-solid reaction measurement—Micro fluidized bed method
T/CAAMTB 27-2021 Requirements and test methods for micro gas generator used in vehicles
T/CCGA 10008-2022 Technical requirement for appointed-place information management system for small liquefied petroleum gas (commercial propane) road tanker with pump
T/AIMC 002-2019 Information management system for small LPG (commercial propane) tanker with unloading pump——Part1: General architecture
T/AIMC 004-2019 Information management system for small LPG (commercial propane) tanker with unloading pump——Part3: Communication protocol

Defense Logistics Agency, mini gas tank

DLA MS24286 REV E VALID NOTICE 1-2013 CONNECTORS, ELECTRICAL, MINIATURE
DLA DSCC-DWG-85062 REV C-2001 CONNECTOR, ELECTRICAL, MINIATURE, RETAINER, SLIDING LOCK
DLA DSCC-DWG-85062 REV D-2012 CONNECTOR, ELECTRICAL, MINIATURE, RETAINER, SLIDING LOCK
DLA MS27399 REV A-2005 CONNECTOR, ELECTRICAL, STYLE S, RACK AND PANEL, MINIATURE, CLOSED ENTRY
DLA QPL-25516-15 NOTICE 1-2008 Connectors, Electrical, Miniature, Coaxial, Environment Resisting Type, General Specification for
DLA MS27034 REV J-2004 CONNECTORS, RECEPTACLE, ELECTRICAL, PIN INSERT, CYLINDRICAL, MINIATURE, HERMETIC, SOLDER MOUNT
DLA QPL-25516-QPD-2009 Connectors, Electrical, Miniature, Coaxial, Environment Resisting Type, General Specification for
DLA QPL-25516-2013 Connectors, Electrical, Miniature, Coaxial, Environment Resistant Type, General Specification for
DLA MIL-DTL-83513/5 H (2)-2010 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
DLA MIL-DTL-21617/17 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 026A)
DLA MIL-DTL-21617/19 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 032A)
DLA MIL-DTL-21617/20 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 032A)
DLA MIL-DTL-21617/22 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 040A)
DLA MIL-DTL-21617/23 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 040A)
DLA MIL-DTL-21617/10 VALID NOTICE 1-2008 CONNECTOR, FEMALE PLUG ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, SOCKET CONTACTS (STYLE 017A)
DLA MIL-DTL-21617/11 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 017A)
DLA MIL-DTL-21617/13 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 023A)
DLA MIL-DTL-21617/14 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 023A)
DLA MIL-DTL-21617/16 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 026A)
DLA MIL-DTL-21617/1 VALID NOTICE 1-2008 CONNECTOR, FEMALE PLUG ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, SOCKET CONTACTS (STYLE 004A)
DLA MIL-DTL-21617/4 VALID NOTICE 1-2008 CONNECTOR, FEMALE PLUG ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, SOCKET CONTACTS (STYLE 008A)
DLA MIL-DTL-21617/7 VALID NOTICE 1-2008 CONNECTOR, FEMALE PLUG ELECTRICAL, RECTANGuLAR, POLARIZED SHELL, MINIATURE TYPE, SOCKET CONTACTS (STYLE 013A)
DLA MIL-DTL-21617/2 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS (STYLE 004A)
DLA MIL-DTL-21617/5 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS (STYLE 008A)
DLA MIL-DTL-21617/8 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS (STYLE 013A)
DLA QPL-25955-8 NOTICE 1-2008 Connectors, Electrical, Environmental Resisting, Miniature, with Snap-in Contacts
DLA DSCC-DWG-86040 REV C-2004 CONNECTOR, RECEPTACLE, ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS
DLA DSCC-DWG-86078 REV B-2004 CONNECTORS, PLUG, ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS
DLA QPL-32139-2-2006 CONNECTORS, ELECTRICAL, RECTANGULAR, NONOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-32139 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA QPL-26500-2013 Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting, General Specification for
DLA QPL-26500-QPD-2010 Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting, General Specification for
DLA QPL-26500-QPD-2011 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING, GENERAL SPECIFICATION FOR
DLA MIL-DTL-26500 G-2011 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING, GENERAL SPECIFICATION FOR
DLA QPL-26500-2011 Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting, General Specification for
DLA MIL-DTL-21617/18 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 026A)
DLA MIL-DTL-21617/21 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 032A)
DLA MIL-DTL-21617/24 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 040A)
DLA MIL-DTL-21617/25 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Coaxial ontacts (STYLE 007C)
DLA MIL-DTL-21617/26 VALID NOTICE 1-2008 Connector, Male Electrical, Rectangular, Polarized Shell, Miniature Type, Pin Coaxial Contacts (Style 007C)
DLA MIL-DTL-21617/27 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectangular, Polarized Shell, Miniature Type, Mixed Socket Contacts (Style 016C)
DLA MIL-DTL-21617/28 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Mixed Pin Contacts (Style 016C)
DLA MIL-DTL-21617/12 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized Type (Style 017A)
DLA MIL-DTL-21617/15 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 023A)
DLA MIL-DTL-83513/6 E (3)-2010 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS P, SOLDER TYPE
DLA MIL-DTL-83513/6 E (4)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS P, SOLDER TYPE
DLA MIL-DTL-21617/3 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 004A)
DLA MIL-DTL-21617/6 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 008A)
DLA MIL-DTL-21617/9 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 013A)
DLA DSCC-DWG-85043 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, FIVE SIZE 8 CONTACT CAVITIES
DLA DSCC-DWG-85047 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, EIGHT SIZE 8 CONTACT CAVITIES
DLA MS24264 REV P-2004 CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES F, G AND R
DLA MS24265 REV P-2004 CONNECTORS, RECEPTACLE, ELECTRICAL, SINGLE HOLE MOUNT, MINIATURE, CLASSES F, G AND R
DLA QPL-26500-70 NOTICE 1-2008 Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting, General Specification for
DLA QPL-25955-QPD-2010 Connectors, Electrical, Environmental Resisting, Miniature, with Snap-in Contacts
DLA QPL-25955-2011 Connectors, Electrical, Environmental Resisting, Miniature, with Snap-in Contacts
DLA QPL-32139-2012 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
DLA MIL-DTL-25955 A VALID NOTICE 1-2013 Connectors, Electrical, Environment Resisting, Miniature, with Snap-in Contacts
DLA MIL-DTL-83513/1 H-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, SOLDER TYPE
DLA MIL-DTL-83513/1 H (1)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, SOLDER TYPE
DLA MIL-DTL-83513/8 F (1)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS P, CRIMP TYPE
DLA MIL-DTL-83513/9 F (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, SOCKET CONTACTS, CLASS P, CRIMP TYPE
DLA MIL-DTL-83513/7 E (2)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, SOCKET CONTACTS, CLASS P, SOLDER TYPE
DLA MIL-DTL-83513 F (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513 G-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513 G (1)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-32139/1 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/2 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, RECEPTACLE, POLARIZED SHELL, SOCKET CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/3 A-2006 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/1 A (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/3 A (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/3 A (3)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/1 A (3)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA DSCC-DWG-85048 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, SEVENTEEN SIZE 20 SIGNAL CONTACTS, WITH FOUR SIZE 8 CONTACT CAVITIES
DLA DSCC-DWG-85054 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, SEVENTEEN SIZE 20 SIGNAL CONTACTS, WITH SEVEN SIZE 8 CONTACT CAVITIES
DLA MIL-DTL-24308/25 K-2008 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, MALE
DLA MIL-DTL-32139/3 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, PLUG, POLARIZED SHELL, PIN CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/4 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, RECEPTACLE, POLARIZED SHELL, SOCKET CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/2 A (2)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, RECEPTACLE, POLARIZED SHELL, SOCKET CONTACTS, CRIMP TYPE
DLA MIL-DTL-32139/4 A (2)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, DUAL ROW, RECEPTACLE, POLARIZED SHELL, SOCKET CONTACTS, CRIMP TYPE
DLA QPL-32139-2 NOTICE 1-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NONOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA QPL-32139-QPD-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, NONOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-32139 A (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513/3 J (1)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
DLA MIL-DTL-32139 A (3)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513/3 J (2)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
DLA MIL-DTL-39024/18 F VALID NOTICE 1-2013 Connectors, Electrical, Test Point Type, Printed Wiring Type; Micro-Miniature, Single Test Point (2-Leg Mounting), Low Voltage, .080 Inch
DLA MIL-DTL-21617 B-2012 CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE GENERAL SPECIFICATION FOR
DLA QPL-83733-9-2006 CONNECTORS, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEG.C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
DLA MIL-DTL-32139/6-2012 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, SINGLE ROW, RECEPTACLE, POLARIZED SHELL, SOCKET CONTACTS, VERTICAL PCB THROUGH-HOLE TYPE
DLA A-A-55151 A-2012 CONNECTORS, ELECTRICAL, RECTANGULAR, MINIATURE, POLARIZED SHELL, PLUG AND RECEPTACLE, BAIL LOCKING HARDWARE KIT
DLA QPL-26482-QPD-2010 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA QPL-26482-QPD-2011 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA QPL-26482-2011 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA QPL-26482-1-2012 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA QPL-26482-QPD-2012 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA QPL-26482-2013 Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles and Plugs, General Specification for
DLA MIL-DTL-24308 G-2009 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 G (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308 G (2)-2012 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-24308/3 J-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
DLA MIL-DTL-24308/4 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
DLA MIL-DTL-24308/3 J (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
DLA MIL-DTL-24308/26 L-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, FEMALE
DLA MIL-DTL-24308/26 L (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, FEMALE
DLA MIL-DTL-24308/26 L (4)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, FEMALE
DLA MIL-DTL-83513/10 D-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 2 ROW, SOLDER TYPE, NARROW PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-83513/33 B-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-83513/32 B (1)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-83513/33 B (1)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-24308/7 J-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASSES M AND N, SOLDER TYPE
DLA MIL-DTL-24308/8 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
DLA MIL-DTL-24308/23 G-2009 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SOCKET CONTACTS PRINTED WIRING BOARD TERMINATION TYPES
DLA MIL-DTL-24308/7 J (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASSES M AND N, SOLDER TYPE
DLA MIL-DTL-24308/8 P (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
DLA MIL-DTL-24308/23 G (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SOCKET CONTACTS PRINTED WIRING BOARD TERMINATION TYPES
DLA MIL-DTL-24308/23 G (2)-2012 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SOCKET CONTACTS PRINTED WIRING BOARD TERMINATION TYPES
DLA MIL-DTL-24308/8 P (2)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
DLA QPL-27599-13-2005 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR
DLA MIL-DTL-83733/4 D (1)-2012 CONNECTORS, ELECTRICAL, PLUG, SOCKET CONTACT, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, WITH CAPTIVE SPRINGS, ENVIRONMENT RESISTING, 200癈
DLA QPL-27599-QPD-2009 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for
DLA QPL-26518-2012 Connectors, Electrical, Miniature, Rack and Panel, Environment Resistant, 200 Degrees C Ambient Temperature, General Specification for
DLA MIL-DTL-26518 C VALID NOTICE 1-2013 Connectors, Electrical, Miniature, Rack and Panel, Environment Resistant, 200 Degrees C Ambient Temperature, General Specification for
DLA MIL-DTL-24308/2 T-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
DLA MIL-DTL-24308/1 K (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
DLA MIL-DTL-24308/5 M-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, NONMAGNETIC, CLASS M AND N, SOLDER TYPE
DLA MIL-DTL-24308/6 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE SOCKET CONTACTS, NONMAGNETIC, CLASSES M AND N, CRIMP TYPE
DLA MIL-DTL-24308/5 M (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, NONMAGNETIC, CLASS M AND N, SOLDER TYPE
DLA MIL-DTL-24308/6 P (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE SOCKET CONTACTS, NONMAGNETIC, CLASSES M AND N, CRIMP TYPE
DLA MIL-DTL-24308/6 P (2)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE SOCKET CONTACTS, NONMAGNETIC, CLASSES M AND N, CRIMP TYPE
DLA MIL-DTL-24308/5 M (2)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, NONMAGNETIC, CLASS M AND N, SOLDER TYPE
DLA QPL-83733-9 NOTICE 1-2008 Connectors, Electrical, Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature
DLA A-A-55153 VALID NOTICE 3-2011 Connectors, Electrical, IEEE 488 Compatible, Rectangular, Miniature, Polarized Shell, Plug and Receptacle, Metric Jackscrew
DLA A-A-55154 VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, RECTANGULAR, LOW PROFILE, 24 POSITION, FLAT CABLE TERMINATING, INSULATION DISPLACEMENT, SCREW LOCKING
DLA A-A-55154 VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, RECTANGULAR, LOW PROFILE, 24 POSITION, FLAT CABLE TERMINATING, INSULATION DISPLACEMENT, SCREW LOCKING
DLA A-A-55154-1994 CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, RECTANGULAR, LOW PROFILE, 24 POSITION, FLAT CABLE TERMINATING, INSULATION DISPLACEMENT, SCREW LOCKING
DLA MIL-DTL-24308/24 H-2009 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS PRINTED WIRING BOARD TERMINATION TYPES
DLA MIL-DTL-24308/24 H (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS PRINTED WIRING BOARD TERMINATION TYPES
DLA A-A-55142 VALID NOTICE 3-2011 Connectors, Electrical, IEEE 488 Compatible, Rectangular, Miniature, Polarized Shell, Plug, Low Profile, 24 Position, Flat Cable Terminating, Insulation Displacement, Screw Locking
DLA MIL-DTL-24308/24 H (2)-2012 CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS PRINTED WIRING BOARD TERMINATION TYPES

Professional Standard - Aviation, mini gas tank

HBm 65.16-1988 Micro car gasoline engine air ring
HBm 65.17-1988 Micro car gasoline engine valve
HBm 65.11-1988 Mini car gasoline engine cylinder head
HBm 65.22-1988 Mini car gasoline engine cylinder block
HBm 65.19-1988 Micro car gasoline engine valve spring
HBm 65.24-1988 Micro car gasoline engine air filter
HBm 65.10-1988 Specifications for cylinder head gasket of gasoline engine of miniature automobile
HBm 65.25-1988 Micro car gasoline engine air filter element
HBm 75.6-1988 Gas-assisted support for the back door of minivan
HBm 65.20-1988 Specifications for valve rocker arms of gasoline engines for miniature automobiles
HBm 66.12-1988 Specifications for wire harnesses for electrical equipment of miniature trucks
HB 8588-2020 Specification for civil aircraft quick-don oxygen mask with mini-regulator

国家市场监督管理总局、中国国家标准化管理委员会, mini gas tank

GB/T 36765-2018 1,1,1,2-Tetrafluoroethane for automobile air-conditioning use（aerosol product）
GB/T 38180-2019 Microturbines applications—Safety
GB/T 38432-2019 Particle—Gas-solid reaction measurement—Micro fluidized bed method

Association Francaise de Normalisation, mini gas tank

NF E29-768*NF EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
NF H44-002*NF EN ISO 90-3:2001 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3 : aerosol cans.
NF C93-850-5:2007 Optical fibre cables - Part 5 : sectional specification - Microduct cabling for installation by blowing.
NF F00-013:1981 Railway material in general. Registration and service plate small model and tests plate for compressed air tanks.
NF H44-002:1993 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 3 : aerosol cans.
NF EN ISO 10692-2:2001 Bouteilles à gaz - Raccords pour robinets de bouteilles à gaz pour l'industrie de la microélectronique - Partie 2 : spécifications et essais de type pour les raccords entre le robinet et la bouteille
NF L55-515:1976 Installations électriques et radioélectriques de bord - Lampes miniatures à culot à plot central et ampoule T 1 3/4
NF E29-692-2*NF EN ISO 10692-2:2001 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections
NF M88-739/A1:2005 Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture.
NF R19-900-4*NF EN ISO 14451-4:2013 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4 : requirements and categorization for micro gas generators

British Standards Institution (BSI), mini gas tank

BS EN ISO 3807:2013 Gas cylinders. Acetylene cylinders. Basic requirements and type testing
BS ISO TR 11762:1992 Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type
BS ISO 10654:1993 Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes
BS ISO TR 11762:1996 Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type
BS ISO 10154:1991 Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
BS ISO 10654:1995 Light gauge metal containers - Round open-top cans - Cans for liquid products with added gas, defined by their nominal filling volumes
BS ISO 7588-3:1998 Road vehicles. Electrical/electronic switching devices. Microrelays
BS DD IEC/TS 62257-9-2:2006 Recommendations for small renewable energy and hybrid systems for rural electrification - Microgrids
BS ISO 10154:1995 Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
BS EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture
BS EN 14075:2002(2005) Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture
BS EN ISO 14451-4:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles Requirements and categorization for micro gas generators
BS PD IEC/TS 62257-9-2:2016 Recommendations for renewable energy and hybrid systems for rural electrification. Integrated systems. Microgrids
BS 8660-1:2011 Gas-fired micro-cogeneration appliances of rated thermal input not exceeding 70 kW net. Specification for selection, installation<(>,<)> inspection<(>,<)> commissioning, servicing and maintenance of Stirling engine micro-cogeneration appliances

SAE - SAE International, mini gas tank

SAE J1911-1990 Test Procedure for Air Reservoir Capacity - Highway Type Vehicles@ Recommended Practice
SAE J1911-1997 Test Procedure for Air Reservoir Capacity - Highway Type Vehicles
SAE AS5258/5-1998 Insulating Components@ Molded@ Electrical@ Heat Shrinkable@ Boot@ Strain Relief and Sealing@ Straight@ Low Profile@ Miniature
SAE AS5258/6A-2011 Insulating Components@ Molded@ Electrical@ Heat Shrinkable@ Boot@ Strain Relief and Sealing@ Right Angle@ Low Profile@ Miniature
SAE AS5258/6-1998 Insulating Components@ Molded@ Electrical@ Heat Shrinkable@ Boot@ Strain Relief and Sealing@ Right Angle@ Low Profile@ Miniature
SAE AS5258/5A-2011 Insulating Components@ Molded@ Electrical@ Heat Shrinkable@ Boot@ Strain Relief and Sealing@ Straight@ Low Profile@ Miniature

Society of Automotive Engineers (SAE), mini gas tank

SAE J1911-2002 Test Procedure for Air Reservoir Capacity—Highway Type Vehicles
SAE J1911-2003 Test Procedure for Air Reservoir Capacity - Highway Type Vehicles
SAE J2077-1990 Miniature Blade Type Electrical Fuses, Standard November 1990
SAE AS6173/1-2014 CUTTING TOOL (MINIATURE) ELECTRICAL, WIRE CUTTING, HAND ACTUATED, TYPE I, WIRE SIZES 26 THROUGH 16
SAE AS5258/5-2004 Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature
SAE AS5258/6-2004 Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature
SAE AS81703_A1-2004 Connectors, Electric, Circular, Miniature, Rack and Panel Or Push-Pull Coupling, Environment Resisting
SAE AS81703-2004 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting

Professional Standard - Electron, mini gas tank

SJ 2240.5-1982 Variable air dielectric vane trimmer capacitors for Type CW32
SJ 2240.4-1982 Variable air dielectric vane trimmer capacitors for Type CW31
SJ 2240.7-1982 Variable air dielectric vane trimmer capacitors for Type CW42
SJ 1725-1981 Gas-filled microwave switching tubes,Type RX-61
SJ 980-1975 Gas-filled microwave switching tubes,Type RX-21
SJ 1724-1981 Gas-filled microwave switching tubes,Type RX-56
SJ 1726-1981 Gas-filled microwave switching tubes,Type RX-109
SJ 2008-1982 Gas-filled microwave switching tubes,Type RX-5
SJ 2244-1982 Gas-filled microwave switching tubes,Type RX-54
SJ 2245-1982 Gas-filled microwave switching tubes,Type RX-7
SJ 2009-1982 Gas-filled microwave switching tubes,Type RX-49
SJ 1723-1981 Gas-filled microwave switching tubes,Type RX-32
SJ 2240.6-1982 Variable air dielectric vane trimmer capacitors for Type CW41 and CW41S
SJ 2240.8-1982 Variable air dielectric vane trimmer capacitors for Type CW5 and CW5S
SJ 2240.1-1982 Variable air dielectric vane trimmer capacitors for Type CW1 and CW1S
SJ 2240.2-1982 Variable air dielectric vane trimmer capacitors for Type CW2 and CW2S
SJ 2240.3-1982 Variable air dielectric vane trimmer capacitors for Type CW3 and CW3S
SJ 2246-1982 Gas-filled microwave switching tubes,Type RX-202, RX-203
SJ 20464/2-1999 Detail specification for gas-filled microwave switching tubes of type RX-277
SJ 20464.1-1994 Orthogonal mode coupler of aluminum waveguide,type BZS-100-1
SJ 20031-1992 General specification for air dielectric vane trimmer variable capacitors
SJ 2240-1982 Generic specification for variable air dielectric vane trimmer capacitors
SJ 20032/1-1994 Detail specification for air dielectric tubular (piston type) trimmer variable capacitors,Model CWG27,CWG28 and CWG29
SJ 20033-1992 Detail specification for air dielectric tubular(piston type）trimmer variable capacitor,model JCWG31
SJ 20034-1992 Detail specification for air dielectric tubular(piston type）trimmer variable capacitor,model JCWG26
SJ 20035-1992 Detail specification for air dielectric tubular(piston type) trimmer variable capacitor,model JCWG32
SJ 20032-1994 Detail specification for air dielectric tubular(piston type) trimmer variable capacitors,Model CWG27,CWG28 and CWG29
SJ 20032-1992 Air dielectric tubular (piston type) trimmer variable capacitors

European Committee for Standardization (CEN), mini gas tank

EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
EN 16509:2014 Transportable gas cylinders - Non-refillable@ small transportable@ steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design@ construction@ filling and testing
EN ISO 14451-4:2011 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators
EN ISO 14451-4:2013 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators
prEN ISO 14451-4 rev Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 4: Requirements and categorization for micro gas generators
EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground Design and manufacture Includes amendment A1:2004
EN ISO 10692-2:2001 Gas Cylinders - Gas Cylinder Valve Connections for Use in the Microelectronics Industry - Part 2: Specification and Type Testing for Valve to Cylinder Connections ISO 10692-2:2001

Professional Standard - Post and Telecommunication, mini gas tank

YD/T 1460.4-2006 Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 4: Microduct optical fibre cables
YD/T 1460.3-2006 Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 3: Microducts, microduct bundles and microduct accessories
YD/T 1460.1-2006 Telecommunication microduct optical fibre cables and fibre units for installation by blowing Part 1: General
YD/T 1460.2-2006 Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 2: Outer protective ducts
YD/T 1460.5-2023
YD/T 1460.5-2006 Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 5: Enhanced performance fibre units

工业和信息化部, mini gas tank

YD/T 1460.4-2019 Air-blown micro optical cables and optical fiber units for communications Part 4: Micro optical cables
YD/T 1460.1-2018 Air-blown micro-optical cables and optical fiber units for telecommunications Part 1: General principles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, mini gas tank

GB/T 13928-2002 Reciprocating piston minitype air compressor
GB/T 13928-2015 Reciprocating minitype air compressors
GB/T 31371-2015 Requirements of disassembly and treatment for waste electrical and electronic product.Desktop microcomputer
GB/T 31372-2015 Requirements of disassembly and treatment for waste electrical and electronic product.Portable microcomputer
GB/T 7424.5-2012 Optical fibre cables.Part 5:Sectional specification.Micro duct optical fibre cables and fibre units for installation by blowing

SE-SIS, mini gas tank

SIS SMS 2262-1968 Gas cylinders. Valve for gas cylinders for liquefied petroleum gas filling weight below 5 kg

BE-NBN, mini gas tank

NBN H 03-102-1987
NBN H 03-101-1987 Light gauge metal containers - Aerosol cans - Definitions and determination methods for dimensions and capacities

RO-ASRO, mini gas tank

STAS 12418/5-1986 Pneumatic fluid power Micropneumatic RESTRICTORS Types and basic dimensions
STAS 10876/2-1984 Aicraft electrieal filament lamps. SUBMINIATURE LAMPS. Special technical requirements for quality
STAS 10876/3-1984 Aircraft electrical filament lamps MIX1ATURE LAMPS FOR POWERS UP TO 5 W INCLUDING Special technical requirements for qualily

Professional Standard - Energy, mini gas tank

NB/T 47001-2009 Steel liquefied petroleum gas horizontal tanks type and data base

AENOR, mini gas tank

UNE-ISO 13689:2005 Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge.
UNE 26299-3:2003 Road vehicles: Electrical/electronic switching devices. Part 3: Microrelays.
UNE-EN ISO 10692-2:2002 Gas cylinders- Gas cylinder valve connections for use in the microelectronecs industry - Part 2 : Specification and type testing for valve to cylinder connections. (ISO 10692-2:2001)
UNE-EN 13028:2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

Professional Standard - Machinery, mini gas tank

JB/T 3716-1999 Pneumatic shockless jolt squeeze moulding machine Technical conditions
JB/T 3716-2015 Specifications for Pneumatic Micro-vibration Compaction Molding Machine
JB/T 6539-1992 Steel pressure vessel for micro-air compressor
JB/T 2001.57-1999 Water system.Gas ball-accumulator.Type and size
JB/T 2001.55-1999 Water system.Gas ball-accumulator.Type and size

American National Standards Institute （ANSI), mini gas tank

ANSI/VITA 48.1-2010 Mechanical Specification for Microcomputers Using REDI Air Cooling

中国气象局, mini gas tank

QX/T 467-2018 Technical requirements for micro drop-down meteorological sondes
QX/T 466-2018 Technical requirements for micro fixed-wing UAV airborne meteorological detection system

American Society for Testing and Materials (ASTM), mini gas tank

ASTM D5482-01 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
ASTM D5191-12 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D5191-10a Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM F3285-18 Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
ASTM D5200-92(1997)e1 Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
ASTM F3285-18(2023) Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
ASTM D5200-03(2021) Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
ASTM D3685/D3685M-98(2005) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3685/D3685M-98 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3685/D3685M-13 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D5191-20 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D5191-18a Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D5191-19 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

KR-KS, mini gas tank

KS D ISO TR 11762-2019 Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type
KS R 5100-1-2023 Common battery module for micro electric vehicles — Part 1: Requirements for electric/electronic and mechanical characteristics

Association of German Mechanical Engineers, mini gas tank

VDI 3783 Blatt 10-2010 Environmental meteorology - Diagnostic microscale wind field models - Air-flow around buildings and obstacles
VDI 4251 Blatt 3-2015 Measurement of airborne microorganisms and viruses in ambient air - Plant-related dispersion modelling for bioaerosols
VDI 3783 Blatt 9-2017 Environmental meteorology - Prognostic microscale wind field models - Evaluation for flow around buildings and obstacles
VDI 3783 Blatt 9-2005 Environmental meteorology - Prognostic microscale windfield models - Evaluation for flow around buildings and obstacles

CN-QIYE, mini gas tank

Q/GDW 671-2011

Heilongjiang Provincial Standard of the People's Republic of China, mini gas tank

DB23/T 1532-2013 Technical basic requirements for ultra-large air flotation microvibration isolation device

Military Standard of the People's Republic of China-General Armament Department, mini gas tank

GJB 7564-2012 General specifications for micro gas turbine generator sets for military use

RU-GOST R, mini gas tank

GOST 19662-1989 Isothermal reservoirs for liquid carbon dioxide. Types, main parameters and dimensions
GOST 18683.1-1983 Digital integrated circuits. Methods for measuring static electrical parameters
GOST 18683.2-1983 Digital integrated circuits. Methods of measuring dynamic electrical parameters
GOST 27694-1988 Integrated circuits. Low-, intermediate- and high-frequency amplifiers. Methods for measuring electric parameters

API - American Petroleum Institute, mini gas tank

API PUBL 2021A-1998 Interim Study - Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks (First Edition)

German Institute for Standardization, mini gas tank

DIN EN ISO 90-3:2001 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001
DIN EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013); German version EN ISO 3807:2013
DIN EN 60794-5:2008 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing (IEC 60794-5:2006); German version EN 60794-5:2007
DIN EN ISO 90-3:2001-12 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001
DIN EN ISO 10692-2:2003 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
DIN 32508:2000-12 Micro devices for brazing and welding with own hydrogen and oxygen production - Mechanical and gas engineering requirements, test, marking
DIN EN ISO 3807:2015 Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2014-11-01); German version EN ISO 3807:2013
DIN EN ISO 10692-2:2003-04 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
DIN EN 13028:2001-04 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes; German version EN 13028:2001
DIN EN ISO 14451-4:2013-08 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators (ISO 14451-4:2013); German version EN ISO 14451-4:2013

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), mini gas tank

ASHRAE OR-05-9-1-2005 A CHP System Optimization with Microturbine Recuperation Control
ASHRAE OR-05-9-3-2005 Dynamic Performance of a 30-kW Microturbine-Based CHP System

ZA-SANS, mini gas tank

SANS 319:2008 Measuring systems - Cryogenic liquids and other selected liquid gases in vertical tanks - Pressure differential method
SANS 60794-5:2007 Optical fibre cables Part 5: Sectional specification - Microduct cabling for installation by blowing

Danish Standards Foundation, mini gas tank

DS/EN ISO 90-3:2002 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans
DS/EN ISO 10692-2:2002 Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections
DS/EN ISO 14451-4:2013 Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators

Professional Standard - Electricity, mini gas tank

DL/T 687-1999 General specification for prevent electric mal-operation device with computer
DL/T 687-2010 General specification for preventing electric mal-operation system with computer

European Committee for Electrotechnical Standardization（CENELEC）, mini gas tank

EN 60794-5:2007 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
EN 60794-5:2016 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing

Professional Standard - Commodity Inspection, mini gas tank

SN/T 0319-1994 Rules for the inspection of head of miniaturereciprocal piston compressor for export
SN/T 0319.2-2013 Rules for the inspection of air compressors for import and export.Part 2:Reciprocating piston minitype air compressor

International Electrotechnical Commission (IEC), mini gas tank

IEC 60794-5:2006 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
IEC 60794-5:2014 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
IEC TS 62257-9-2:2006 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-2: Microgrids
IEC TS 62257-9-1:2008 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-1: Micropower systems

国家能源局, mini gas tank

SY/T 7607-2020 Rapid determination of hydrogen sulfide and tetrahydrothiophene in natural gas by gas chromatography with micro thermal conductivity

CZ-CSN, mini gas tank

CSN ISO 10154:1994 Light gauge metal containers - Three-piece necked-in tinplate aerosol cans - Dimensions of the top end
CSN ISO 90-3:1994 Light gauge metal containers. Definitins and determination methods for dimensions and capacites. Part 3: Aerosol cans

Indonesia Standards, mini gas tank

SNI 7613-2010 Fuel gas burner LPG stove with a lighter system specifically for micro mechanical

Lithuanian Standards Office , mini gas tank

LST EN ISO 90-3:2002 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)
LST EN ISO 10692-2:2002 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001)
LST EN 13028+AC-2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

ES-UNE, mini gas tank

SAE AS81703B-2023 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., mini gas tank

ASHRAE HI-02-5-3-2002 Integration of Microturbine with Single-Effect Exhaust-Driven Absorption Chiller and Solid Wheel Desiccant System

IN-BIS, mini gas tank

IS 6134 Pt.9-1981

PT-IPQ, mini gas tank

NP 2261-1986

ECIA - Electronic Components Industry Association, mini gas tank

524-1986 Dimensional@ Mechanical and Electrical Characteristics Defining Right Angle@ PC Mount Miniature Telephone Jacks and Plugs

AIA/NAS - Aerospace Industries Association of America Inc., mini gas tank

NAS1599-1980 Connectors@ General Purpose@ Electrical@ Miniature Circular@ Environment Resisting@ 200 Degrees C Maximum Temperature (Rev 5)

AT-ON, mini gas tank

ONORM EN 20090-3-1993 Light gauge metal Containers - Definitions and determination methods for dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:1986)