ZH
RU
ES

High Quality Mixer

High Quality Mixer, Total:157 items.

In the international standard classification, High Quality Mixer involves: Company organization and management, Wastes, Road engineering, Iron and steel products, Equipment for the glass and ceramics industries, Powder metallurgy, Geology. Meteorology. Hydrology, Materials for aerospace construction, Transformers. Reactors, Products of non-ferrous metals, Installations in buildings, Non-ferrous metals, TESTING, Meat, meat products and other animal produce, Sensory analysis, Integrated circuits. Microelectronics, Mining equipment, Construction materials, Water quality, Environmental protection, Welding, brazing and soldering, Electronic component assemblies, Rectifiers. Convertors. Stabilized power supply, Measurement of fluid flow, Lamps and related equipment, Electrical accessories, Electrical equipment for working in special conditions, Biology. Botany. Zoology, Air quality, Information sciences. Publishing, Ceramics, Medical equipment, Fuels, Laboratory medicine, Medical sciences and health care facilities in general, Plastics.


ACI - American Concrete Institute, High Quality Mixer

Gansu Provincial Standard of the People's Republic of China, High Quality Mixer

  • DB62/T 545-2002 Jingchuan County Pollution-free High-quality Apple Model Specifications

VN-TCVN, High Quality Mixer

  • TCVN 3105-1993 Heavywight fresh concrete and concrete.Sampling, marking and curing test specimens

Group Standards of the People's Republic of China, High Quality Mixer

  • T/CAQP 031-2022 Home appliances high-quality after-sales service
  • T/CAQP 030-2022 Quality service commitmeng standard for household appliances
  • T/CAQP 029-2022 Home appliances standard for quality service evaluation
  • T/CEEIA 371-2019 Evaluation Guide for Top-quality Dry-type Power Transformers
  • T/CEEIA 372-2019 Evaluation Guide for Top-Quality oil-immersed Power transformers
  • T/HRX 000004-2021 Evaluation rules for energy-saving and environmental protection high-quality products of commercial gas appliances
  • T/GDAEPI 02-2019 The technical requirement and test procedures of automatic sampler for excessive water quality

American Society for Testing and Materials (ASTM), High Quality Mixer

  • ASTM D5495-03(2007) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D5495-03 Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D6925-07 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
  • ASTM D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
  • ASTM A228/A228M-16 Standard Specification for Steel Wire, Music Spring Quality
  • ASTM D5495-03(2011) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D6925-06 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
  • ASTM A646/A646M-06 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
  • ASTM A646/A646M-06(2011) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
  • ASTM C513-89(1995) Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • ASTM C513-11 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • ASTM C513/C513M-11e1 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • ASTM D4013-98(2005) Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
  • ASTM D4013-98 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
  • ASTM C513/C513M-11(2019) Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • ASTM D4306-12 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
  • ASTM D4306-13 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
  • ASTM D4306-15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

Association Francaise de Normalisation, High Quality Mixer

  • NF E58-825:2006 Ceramic machines - Safety - Loading and unloading of fine clay tiles.
  • NF T90-553*NF EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
  • NF T90-353:1995 Water quality. Sampling in deep waters for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers.
  • NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • NF EN 16479:2023 Qualité de l'eau - Exigences de performance et modes opératoires d'essai de conformité pour les équipements de surveillance de l'eau - Dispositifs d'échantillonnage automatiques (échantillonneurs) pour l'eau et les eaux usées
  • NF EN ISO 10993-12:2021 Evaluation biologique des dispositifs médicaux - Partie 12 : préparation des échantillons et matériaux de référence
  • NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
  • XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
  • NF X43-007:2008 Air quality - Ambient air - Determination of the mass of dry atmospheric depositions - Sampling on deposit plates - Preparation and treatment.
  • NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
  • NF EN 140101-806/A1:2014 Spécification particulière : résistances fixes à couche et à faible dissipation - Résistances à couche métallique sur céramique de qualité supérieure, moulée ou disposant d'un revêtement enrobant, avec des sorties préformées ou axiales
  • NF EN 140101-806:2008 Spécification particulière : résistances fixes à couche et à faible dissipation - Résistances à couche métallique sur céramique de qualité supérieure, moulée ou disposant d'un revêtement enrobant, avec des sorties préformées ou axiales

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High Quality Mixer

  • GB/T 6885-2020 Hardmetals—Sampling and testing method of mixed powders
  • GB/T 6885-1986 Hardmetals--Sampling and testing of mixed powder
  • GB 6885-1986 Hardmetals—Sampling and testing of mixed powder
  • GB/Z 23153-2008 Disassembly requirements for testing hazardous substances in lighting equipment

Professional Standard - Water Conservancy, High Quality Mixer

Society of Automotive Engineers (SAE), High Quality Mixer

  • SAE AMS5112M-2008 Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold Drawn
  • SAE AS1182C-2007 Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing
  • SAE AMS6491E-2014 Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted
  • SAE AMS6519C-2010 Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni 3.0Mo 1.4Ti 0.10Al Premium Aircraft-Quality Double Vacuum Melted, Annealed
  • SAE AMS6519D-2014 Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft-Quality Double Vacuum Melted, Annealed
  • SAE AMS5654F-2011 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr 11Ni 0.60(Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated
  • SAE AMS5654E-2001 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60(Cb + Ta) (SAE 30347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated UNS S34700
  • SAE AMS5932B-2005 Steel, Corrosion and Heat-Resistant, Bars, Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum Melted UNS S42640

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., High Quality Mixer

  • ASHRAE SA-96-2-2-1996 Thermodynamic Optimization of Evaporators with Zeotropic Refrigerant Mixtures
  • ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber

Defense Logistics Agency, High Quality Mixer

TR-TSE, High Quality Mixer

  • TS 3289-1979 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE INSULATING CONCRETE TEST SPECIMENS

HU-MSZT, High Quality Mixer

RO-ASRO, High Quality Mixer

  • STAS 880-1988 HEAT-TREATED QUALITY CARBON STEELS OF MACHINE BUILDING Grades and technical requirements for quality
  • STAS 9535/2-1987 MILK AND MILK PRODUCTS Instruments for sampling Technical requirements tor quality
  • STAS 12383-1985 MANIFOLD REGULATORS FOR WELDING, CUTTING AND RELATED PROCESSES Technical requirements for quality

CEN - European Committee for Standardization, High Quality Mixer

German Institute for Standardization, High Quality Mixer

  • DIN EN 12350-1:2019 Testing fresh concrete - Part 1: Sampling and common apparatus
  • DIN 54401:2016-05 Testing of ion exchangers, adsorber resins and hybridadsorbers - Sampling
  • DIN EN 16479:2014-09 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water; German version EN 16479:2014 / Note: To be replaced by DIN EN 16479 (2022-03).
  • DIN EN 16479:2022 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water; German and English version prEN 16479:2021
  • DIN EN 12350-1:2017 Testing fresh concrete - Part 1: Sampling and common apparatus; German and English version prEN 12350-1:2017
  • DIN 51290-3:1991 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens

British Standards Institution (BSI), High Quality Mixer

  • BS EN 12350-1:2019 Tracked Changes. Testing fresh concrete. Sampling and common apparatus
  • BS EN 16479:2014 Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water
  • BS EN 61190-1-2:2002 Attachment materials for electronic assembly - Requirements for solder pastes for high-quality interconnections in electronic assembly
  • BS EN 16479:2023 Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automatic sampling devices (samplers) for water and waste water
  • BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • BS ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of toluene
  • BS EN 61190-1-1:2002 Attachment materials for electronic assembly - Requirements for soldering fluxes for high-quality interconnections in electronics assembly
  • 21/30430866 DC BS EN 16479. Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water
  • BS ISO 18263-2:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Preparation of test specimens and determination of properties

CH-SNV, High Quality Mixer

CU-NC, High Quality Mixer

  • NC 52-64-1985 Construction Machinery. Horizontal Drum Mixer. Quality Specifications
  • NC 54-387-1987 Construction Materials. Sediments. Obtainment of Suspensión Particle Samples from the Platform by Means of Collectors Vessels

Professional Standard - Environmental Protection, High Quality Mixer

  • HJ/T 372-2007 The technical requirement and test procedures for water quality automatic sampler

RU-GOST R, High Quality Mixer

  • GOST 20235.0-1974 Meat of rabbits. Sampling methods. Organoleptic methods of freshness determination
  • PNST 112-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method of sample preparation by rotary seal (Gyrator)
  • GOST R ISO 10993-12-1999 Medical devices. Biological evaluation of medical devices. Part 12. Sample preparation and reference materials

Professional Standard - Geology, High Quality Mixer

  • DZ 0042-1992 Regulations on product drawings and technical documents of geological instruments
  • DZ/T 0042.4-1992 Geological Instrument Product Drawings and Technical Documents Preservation Method
  • DZ/Z 5-1981 General rules for the preparation of product drawings and technical documents of geological instruments
  • DZ/T 0042.1-1992 General rules for the preparation of product drawings and technical documents of geological instruments
  • DZ/T 0042.3-1992 Method for modifying product drawings and technical documents of geological instruments
  • DZ/Z 7-1981 Method for modifying product drawings and technical documents of geological instruments
  • DZ/Z 8-1981 Geological Instrument Product Drawings and Technical Documents Preservation Method
  • DZ/T 0042.2-1992 Requirements and formats for drawings and technical documents of geological instruments
  • DZ/Z 6-1981 Requirements and formats for drawings and technical documents of geological instruments
  • DZ/T 0138-1994 Standardization review of geological instrument product drawings and design documents

Professional Standard - Electron, High Quality Mixer

  • SJ 50597/14-1994 Detail specification for hybrid microcircuits HSH91 precision dual sample/hold amplifier
  • SJ 50597/13-1994 Detail specification for hybrid microcircuits HSH4860 high speed,precision sample/hold amplifier
  • SJ/T 9560.17-1993 Sealed hybrid and solid time delay relay--Quality grading standard
  • SJ/T 9560.18-1993 Unsealed hybrid and solid time delay relay--Quality grading standard

ES-AENOR, High Quality Mixer

  • UNE 77-202-1991 Air quality. Determination of gaseous sulphur compounds in ambient air Sampling equipment

IN-BIS, High Quality Mixer

Korean Agency for Technology and Standards (KATS), High Quality Mixer

  • KS F 2539-1995 Method for securing,preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
  • KS F 2539-2005(2010) Method for securing, preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
  • KS I ISO 9391-2006(2016) Water quality－Sampling in deep waters for macro-invertebrates(Guidance on the use of colonization, qualitative and quantitative samplers)
  • KS E 4005-2013 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
  • KS I ISO 9391:2006 Water quality－Sampling in deep waters for macro-invertebrates(Guidance on the use of colonization, qualitative and quantitative samplers)
  • KS I ISO 8265-2007(2012) Water quality－Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
  • KS P ISO 10993-12:2007 Biological evaluation of medical devices-Part 12:Sample preparation and reference materials
  • KS P ISO 10993-12:2014 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials

FI-SFS, High Quality Mixer

Japanese Industrial Standards Committee (JISC), High Quality Mixer

  • JIS Z 8810:1979 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
  • JIS M 7301:1968 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
  • JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors

未注明发布机构, High Quality Mixer

  • BS EN ISO 9391:1995(2008) Water quality — Sampling in deep waters for macro - invertebrates — Guidance on the use ofcolonization, qualitative and quantitative samplers
  • DIN EN 28265:1994 Water quality; Design and use of quantitative samplers for benthic macro-invertebrates on stony substrates in shallow freshwaters
  • BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

International Organization for Standardization (ISO), High Quality Mixer

  • ISO 3716:1977 Liquid flow measurement in open channels; Functional requirements and characteristics of suspended sediment load samplers
  • ISO 9391:1993 Water quality — Sampling in deep waters for macro-invertebrates — Guidance on the use of colonization, qualitative and quantitative samplers
  • ISO 5667-21:2010 Water quality - Sampling - Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes
  • ISO 10993-12:2021 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials
  • ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials

AASHTO - American Association of State Highway and Transportation Officials, High Quality Mixer

  • TP18-1994 Standard Test Method for Determining the Fundamental Transverse Frequency and Quality Factor of Concrete Prism Specimens

Association of German Mechanical Engineers, High Quality Mixer

  • VDI 4330 Blatt 3-2007 Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Technical pollen sampling using pollen mass filter (PMF) and Sigma-2 sampler

European Committee for Standardization (CEN), High Quality Mixer

  • EN 16479:2023 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automatic sampling devices (samplers) for water and waste water
  • EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
  • EN ISO 9391:1995 Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative Samplers; (ISO 9391 : 1993)

Military Standard of the People's Republic of China-General Armament Department, High Quality Mixer

  • GJB 1214-1991 General Specification for Fixed Capacitors with Reliability Indexes for High-Quality Metalized Plastic Film Dielectric DC, AC or AC, DC Metal Shell Sealed Capacitors

Danish Standards Foundation, High Quality Mixer

  • DS/ISO 10993-12:2021 Biological evaluation of medical devices – Part 12: Sample preparation and reference materials
  • DS/EN ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials

AENOR, High Quality Mixer

  • UNE-EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
  • UNE 81580:1992 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF N-HEXANE AND TOLUENE. PASSIVE SAMPLERS.

IT-UNI, High Quality Mixer

Standard Association of Australia （SAA）, High Quality Mixer

  • AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
  • AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
  • AS/NZS ISO 12029:2014

Professional Standard - Petrochemical Industry, High Quality Mixer

  • SH/T 3414-1999 Specification for selection, inspection and acceptance of bottom sampler for vertical steel light oil tanks in petrochemical industry

SAE - SAE International, High Quality Mixer

  • SAE AMS5932-1998 Steel@ Corrosion and Heat Resistant@ Bars@ Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb Premium Aircraft-Quality@ Carburizing Double Vacuum Melted (UNS S43640)
  • SAE AMS5932A-2000 Steel@ Corrosion and Heat Resistant@ Bars@ Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb Premium Aircraft-Quality@ Carburizing Double Vacuum Melted
  • SAE AMS5932C-2018 Steel@ Corrosion and Heat-Resistant@ Bars@ Forgings and Mechanical Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing@ Premium Aircraft-Quality@ Double Vacuum Melted (UNS S42640)

Professional Standard - Hygiene , High Quality Mixer

  • WS/T 253-2005 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Description of reference materials

  automatic sample mixer, Mixer, Mixer test process, Mixer model, mass mixer, Mixer Specifications, Mixer Specifications, Mixer parameters, Mixer parameters, High-quality sample mixer quality assurance, Quality Mixer Installation, Mixer test, Mixer model, High Quality Mixer, For mixer, High-quality sample mixer quality assurance, Mixer, mixer in english, Test method for high quality sample mixer, sample mixer.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved