ZH
RU
ES
test reagent test material
test reagent test material, Total:498 items.
In the international standard classification, test reagent test material involves: Footwear, Adhesives, Mechanical testing, Testing of metals, Paints and varnishes, Inorganic chemicals, Rubber and plastics products, Products of the chemical industry, Welding, brazing and soldering, Water quality, Road engineering, Wood, sawlogs and sawn timber, Ceramics, Physics. Chemistry, Fuels, Bridge construction, Dentistry, Protection against fire, Materials for aerospace construction, Construction materials, Surface treatment and coating, Elements of buildings, Products of the textile industry, Plastics, Raw materials for rubber and plastics, Wood technology processes, Insulating materials, Components for aerospace construction, Electrical wires and cables, Road vehicles in general, Iron and steel products, Paint ingredients, Particle size analysis. Sieving, Cellular materials, Coatings and related processes used in aerospace industry, Reinforced plastics, Road vehicle systems, Medical equipment, Refractories, Electrical engineering in general, Bearings, Non-destructive testing, Measurement of force, weight and pressure, Equipment for the rubber and plastics industries.
British Standards Institution (BSI), test reagent test material
IT-UNI, test reagent test material
HU-MSZT, test reagent test material
Professional Standard - Machinery, test reagent test material
Korean Agency for Technology and Standards (KATS), test reagent test material
KR-KS, test reagent test material
Standard Association of Australia （SAA）, test reagent test material
German Institute for Standardization, test reagent test material
- DIN 50125:2004 Testing of metallic materials - Tensile test pieces
- DIN 51917:2002 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
- DIN 51220:2022-10 Materials testing machines - General requirements, calibration and verification of materials testing machines
- DIN 53357:1982 Testing of plastics sheets; adhesion test
- DIN 50142:2019 Testing of metallic materials - Flat bending fatigue test
- DIN 50106:2023-02 Testing of metallic materials - Compression test at room temperature
- DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
- DIN 51220:2003 Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines
- DIN EN 1902:1999 Adhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test; German version EN 1902:1999
- DIN 51103:1975 Testing of ceramic materials; determination of the alkali resistance, method with grained test material
- DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
- DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
- DIN 51302-2:2000-12 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
- DIN EN ISO 12236:2006-11 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006); German version EN ISO 12236:2006
- DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
- DIN CEN/TR 15990:2011 Data Sheets - Footwear Tests Materials and Test Adhesives; German version CEN/TR 15990:2010 + AC:2010
- DIN 50125:2016 Testing of metallic materials - Tensile test pieces
- DIN 50125:2009 Testing of metallic materials - Tensile test pieces
- DIN EN ISO 204:2019-04 Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2018); German version EN ISO 204:2018 / Note: To be replaced by DIN EN ISO 204 (2022-08).
- DIN EN ISO 9017:2018-04 Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017); German version EN ISO 9017:2018
- DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
- DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
- DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
- DIN 50106:1978 Testing of Metallic Materials; Compression Test
- DIN 50141:1982 Testing of metals; Shear test
- DIN 53423:1975 Testing of Rigid Cellular Materials; Flexural Test
- DIN 51905:1981 Testing of carbon materials; determination of coking value; binding and impregnating materials
- DIN EN 73:1990 Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988
- DIN 50134:2008 Testing of metallic materials - Compression test of metallic cellular materials
- DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
- DIN EN 13523-27:2017-06 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test); German version EN 13523-27:2017
- DIN 52099:2012 Testing of aggregates - Testing with respect to purity
- DIN 52099:2005 Testing of aggregates - Testing with respect to purity
International Organization for Standardization (ISO), test reagent test material
- ISO 4545:1993 Metallic materials; hardness test; Knoop test
- ISO/TR 14577:1995 Metallic materials — Hardness test — Universal test
- ISO 9455-10:1998 Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method
- ISO 9455-10:2012 Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method
- ISO 6506:1981 Metallic materials; Hardness test; Brinell test
- ISO 146:1984 Metallic materials; Hardness test; Verification of Vickers hardness testing machines HV 0,2 to HV 100
- ISO 1182:1990 Fire tests; building materials; non-combustibility test
- ISO 1182:1983 Fire tests — Building materials — Non-combustibility test
- ISO 156:1982 Metallic materials; Hardness test; Verification of Brinell hardness testing machines
- ISO 12108:2012 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 12108:2002 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 9017:2001 Destructive tests on welds in metallic materials - Fracture test
- ISO/CD 12236 Geosynthetics — Static puncture test (CBR test)
- ISO 12108:2018 Metallic materials - Fatigue testing - Fatigue crack growth method
- ISO 9017:2017 Destructive tests on welds in metallic materials - Fracture test
- ISO/TR 12112:2018 Metallic materials — Principles and designs for multiaxial fatigue testing
- ISO 204:2023 Metallic materials — Uniaxial creep testing in tension — Method of test
- ISO/FDIS 204 Metallic materials — Uniaxial creep testing in tension — Method of test
- ISO 7438:2005 Metallic materials - Bend test
- ISO 7438:2016 Metallic materials - Bend test
- ISO 11531:1994 Metallic materials; earing test
- ISO 7438:1985 Metallic materials; Bend test
- ISO 6892:1984 Metallic materials; Tensile testing
- ISO 7438:2020 Metallic materials — Bend test
- ISO 8494:2013 Metallic materials.Tube.Flanging test
- ISO 8492:2013 Metallic materials.Tube.Flattening test
- ISO 8494:1998 Metallic materials - Tube - Flanging test
- ISO 8492:1986 Metallic materials; Tube; Flattening test
- ISO 8493:1986 Metallic materials; Tube; Drift expanding test
- ISO 7802:1983 Metallic materials; Wire; Wrapping test
- ISO 7802:2013 Metallic materials.Wire.Wrapping test
- ISO/CD TR 6892-5 Metallic materials — Tensile testing — Part 5: Guideline for testing miniaturised test pieces
- ISO 1182:2002 Reaction to fire tests for building products - Non-combustibility test
- ISO 6892-4:2015 Metallic materials - Tensile testing - Part 4: Method of test in liquid helium
- ISO 7148-1:1999 Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals
TR-TSE, test reagent test material
CH-SNV, test reagent test material
American National Standards Institute （ANSI), test reagent test material
ZA-SANS, test reagent test material
- SANS 3452-2:2000 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials
- SANS 52902:2007 Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test
- SANS 6029:2005 Close-joint test pieces for testing wood adhesives
- SANS 6030:2005 Gap-joint test pieces for testing wood adhesives
- SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests
- SANS 7802:2003 Metallic materials - Wire - Wrapping test
- SANS 7438:2003 Metallic materials - Bend test
- SANS 7438:2009 Metallic materials - Bend test
- SANS 4136:2004 Destructive tests on welds in metallic materials - Transverse tensile test
American Society for Testing and Materials (ASTM), test reagent test material
- ASTM D3666-01 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-00 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-02 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-07e1 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-07 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM E8-00b Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-21 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8-03 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM D139-95(2001)e1 Standard Test Method for Float Test for Bituminous Materials
- ASTM D139-95 Standard Test Method for Float Test for Bituminous Materials
- ASTM E8-04 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8-01 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8-01e2 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8-01e1 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E108-10a Standard Test Methods for Fire Tests of Roof Coverings
- ASTM E8-91 Standard Test Method of Tension Testing of Metallic Materials
- ASTM E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-16 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-16a Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-08 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-13 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM D139-12 Standard Test Method for Float Test for Bituminous Materials
- ASTM D139-16 Standard Test Method for Float Test for Bituminous Materials
- ASTM E8/E8M-15 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8/E8M-15a Standard Test Methods for Tension Testing of Metallic Materials
- ASTM D139-07 Standard Test Method for Float Test for Bituminous Materials
- ASTM D305-84(2003) Standard Test Method for Solvent-Extractable Material in Black Pigments
- ASTM D3666-03a Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-03 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3666-06 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM E23-05 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-04 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E238-17 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM E238-84(1996) Standard Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM E3205-20 Standard Test Method for Small Punch Testing of Metallic Materials
- ASTM E290-14 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D305-84(2020) Standard Test Method for Solvent-Extractable Material in Black Pigments
- ASTM D7487-08 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
- ASTM E9-89(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- ASTM E21-17e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E604-83(1994) Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E21-17 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E9-09(2018) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- ASTM E23-06 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E8M-00a Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E8M-01 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E8M-01e1 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E8M-01e2 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E8M-04 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E8-99 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8M-00b Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E604-83(2002) Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E604-83 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E238-12 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM E8M-03 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
- ASTM C874-11a Standard Test Method for Rotary Slag Testing of Refractory Materials
- ASTM E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- ASTM E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- ASTM E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- ASTM E292-18 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-16 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-16a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-16b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM C874-20 Standard Test Method for Rotary Slag Testing of Refractory Materials
- ASTM E8/E8M-16ae1 Standard test method for tensile testing of metallic materials (metric)
- ASTM D305-84(2008) Standard Test Method for Solvent-Extractable Material in Black Pigments
- ASTM D305-84(2014) Standard Test Method for Solvent-Extractable Material in Black Pigments
CZ-CSN, test reagent test material
NL-NEN, test reagent test material
Taiwan Provincial Standard of the People's Republic of China, test reagent test material
- CNS 2112-2005 Test pieces for tensile test for metallic materials
- CNS 3940-1999 Bend test pieces for metallic materials
- CNS 3033-2000 Test pieces for impact test for metallic materials
- CNS 14535-2001 Method of test for flammability of plastic material
- CNS 491-2001 Method of test for materials finer than 75μm sieve in mineral aggregates by washing
- CNS 14801-2004 Method of test for water resistance of material used in protective clothing (Impact penetration test)
ES-AENOR, test reagent test material
PH-BPS, test reagent test material
- PNS ISO 29701:2021 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
DE-VDA, test reagent test material
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, test reagent test material
- GB/T 36416.1-2018 Testing machine vocabulary.Part 1:Material testing machines
- GB/T 24584-2009 Metallic materials.Tensile testing.Method of test in liquid helium
- GB/T 12444-2006 Metallic materials Wear test method Block on ring sliding wear test
- GB/T 2650-2022 Destructive tests on welds in metallic materials—Impact tests
- GB/T 27551-2011 Destructive tests on welds in metallic materials.Fracture test
- GB/T 2791-1995 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
- GB/T 32498-2016 Metal matrix composites.Tensile testing.Method of test at ambient temperature
- GB/T 2651-2023 Destructive testing of welds on metallic materials Transverse tensile testing
AT-ON, test reagent test material
SE-SIS, test reagent test material
- SIS SS 11 25 10-1980 Metallic materials — Hardness test — Brinell test
- SIS SS 11 25 10-1982 Metallic materials — Hardness test — Brinell test
- MNC 323-1982 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1984 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1979 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing — Summary
- MNC 323-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1982 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1984 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
- SIS 11 23 24-1975 Relaxation testing
Association Francaise de Normalisation, test reagent test material
Professional Standard - Medicine, test reagent test material
Japanese Industrial Standards Committee (JISC), test reagent test material
(U.S.) Ford Automotive Standards, test reagent test material
TH-TISI, test reagent test material
- TIS 1319-1995 Standard test method for float test for bituminous materials
- TIS 2173-2012 Metallic materials.bend test
- TIS 2179-2004 Knoop hardness test for metallic materials.[iso title: metallic materials.hardness test.knoop test]
European Committee for Standardization (CEN), test reagent test material
- EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
- EN 1320:1996 Destructive Tests on Welds in Metallic Materials - Fracture Test
- prEN ISO 12236 rev Geosynthetics - Static puncture test (CBR test)
- EN 13523-11:2011 Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
- EN ISO 9017:2013 Destructive tests on welds in metallic materials - Fracture test
- EN ISO 9017:2018 Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017)
- EN 10291:2000 Metallic Materials - Uniaxial Creep Testing in Tension - Method of Test
- EN 10002-1:1990 Metallic materials; tensile testing; part 1: method of test
- EN ISO 148-1:2010 Metallic materials - Charpy pendulum impact test - Part 1: Test method
- EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
- EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
- EN ISO 7438:2005 Metallic materials Bend test
- EN ISO 8492:2013 Metallic materials - Tube - Flattening test
- EN ISO 8494:2013 Metallic materials - Tube - Flanging test
- EN 10045-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
- EN 10002-5:1991 Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
- EN 895:1995 Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test
工业和信息化部/国家能源局, test reagent test material
- JB/T 9189-2016 Test method for rust preventive of water base materials.Mehtod of cast iron powder
The American Road & Transportation Builders Association, test reagent test material
AASHTO - American Association of State Highway and Transportation Officials, test reagent test material
- T 68M/T 68-2009 Standard Method of Test for Tension Testing of Metallic Materials
- T 68-2005 Standard Method of Test for Tension Testing of Metallic Materials
- T68-1994 Standard Method of Test for Tension Testing of Metallic Materials
- T 102-2009 Standard Method of Test for Spot Test of Asphaltic Materials
- T 50-1999 Standard Method of Test for Float Test for Bituminous Materials
- T 50-2014 Standard Method of Test for Float Test for Bituminous Materials
- T 50-2009 Standard Method of Test for Float Test for Bituminous Materials
- T 68M-2005 Standard Method of Test for Tension Testing of Metallic Materials [Metric]
- T 300-2000 Standard Method of Test for Force Ductility Test of Asphalt Materials
- T 300-2011 Standard Method of Test for Force Ductility Test of Asphalt Materials
Danish Standards Foundation, test reagent test material
FI-SFS, test reagent test material
CEN - European Committee for Standardization, test reagent test material
Professional Standard - Forestry, test reagent test material
- LY/T 1283-2011 Method of laboratory test for toxicity of wood preservatives to decay fungi
PL-PKN, test reagent test material
- PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
VN-TCVN, test reagent test material
Lithuanian Standards Office , test reagent test material
- LST EN 1320-1998 Destructive tests on welds in metallic materials - Fracture test
RU-GOST R, test reagent test material
- GOST R ISO 13433-2014 Geosynthetics. Dynamic perforation test (cone drop test)
- GOST R ISO 7438-2013 Mettallic materials. Bend test
- GOST IEC 60811-502-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
- GOST IEC 60811-503-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths
- GOST IEC 60811-509-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
- GOST 32656-2014 Polymer composites. Test methods. Tensile test methods
- GOST 32656-2017 Polymer composites. Test methods. Tensile test methods
- GOST IEC 60811-507-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
未注明发布机构, test reagent test material
- BS EN ISO 204:2023 Metallic materials — Uniaxial creep testing in tension — Method of test
- AASHTO T 102 Asphalt material spot test
- BS 476-4:1970(2014) Fire tests on building materials and structures — Part 4 : Non - combustibility test for materials
ES-UNE, test reagent test material
International Electrotechnical Commission (IEC), test reagent test material
- IEC 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
RO-ASRO, test reagent test material
SAE - SAE International, test reagent test material
Society of Automotive Engineers (SAE), test reagent test material
Professional Standard - Building Materials, test reagent test material
Association of German Mechanical Engineers, test reagent test material
- DVS 2203-4 Beiblatt 1-2001 Testing of welded joints of thermoplastic sheets and pipes - Tensile creep test - Testing of socket joints