ZH
RU
ES
Full size measurement series
Full size measurement series, Total:393 items.
In the international standard classification, Full size measurement series involves: Space systems and operations, Electronic components in general, Galvanic cells and batteries, Freight distribution of goods, Fasteners for aerospace construction, Materials for aerospace construction, Vocabularies, Valves, Motor cycles and mopeds, Products of non-ferrous metals, Aerospace fluid systems and components, Aerospace electric equipment and systems, Linear and angular measurements, Ground service and maintenance equipment, Installations in buildings, Software development and system documentation, Electrical wires and cables, Safety of machinery, Ergonomics, Fruits. Vegetables, Iron and steel products, Pipeline components and pipelines, Telecommunication systems, Metrology and measurement in general, Fluid storage devices, Inland navigation vessels, Farming and forestry, Refractories, Components for aerospace construction, Electrical accessories, Screw threads, Shipbuilding and marine structures in general, Industrial automation systems, Radiation measurements, Paints and varnishes, Applications of information technology, Components and accessories for telecommunications equipment, Occupational safety. Industrial hygiene, Non-destructive testing, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Optics and optical measurements, Road engineering, Technical drawings, Mechanical structures for electronic equipment, Precision mechanics, Measurement of fluid flow, Fluid power systems.
Professional Standard - Aviation, Full size measurement series
- HB 6-1-1967 Dimension series of hairsprings for aviation electrical measuring instruments
Association Francaise de Normalisation, Full size measurement series
- NF L61-030*NF EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats
- NF ISO 668:2020 Conteneurs de la série 1 - Classification, dimensions et masses brutes
- NF EN 4234:2020 Série aérospatiale - Colliers à vis tangente - Dimensions, masses
- NF EN 4730:2018 Série aérospatiale - Dimensionnement anthropométrique des sièges passagers d'avion
- NF L46-228:2010 Aerospace series - Clamps, worm drive - Dimensions, masses.
- NF L46-228*NF EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses
- NF EN 2645:2006 Série aérospatiale - Bagues de sécurité pour raccords droits, filetés, avec bague de sécurité - Dimensions
- NF EN 3841-202:2005 Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 202 : dimensions et masses
- NF EN 4057-202:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 202 : masses et dimensions
- NF ISO 668/A1:2022 Conteneurs de la série 1 - Classification, dimensions et masses brutes - Amendement 1
- NF EN 4115:2010 Série aérospatiale - Profilé en élastomère pour colliers - Dimensions, masses
- NF L44-518:1990 Aéronefs - Raccords pour essais de pressurisation au sol de la cabine des aéronefs - Dimensions (série en inches)
- NF L46-241*NF EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- NF EN 6059-202:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 202 : dimensions et masse
- NF L58-405-202*NF EN 3841-202:2005 Aerospace series - Circuit breakers - Test methods - Part 202 : dimensions and masses
- NF EN 4114:2010 Série aérospatiale - Colliers en "P" en alliage d'aluminium avec profilé en élastomère - Dimensions, masses
- NF EN 3475-203:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 203 : dimensions
- NF EN 4113:2010 Série aérospatiale - Colliers en "P" en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, masses
- NF L52-252-202*NF EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202 : examination of mass and dimensions.
- NF L46-227*NF EN 4114:2010 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses
- NF X35-107-2/IN1*NF EN 547-2/IN1:2008 Safety of machinery - Human body measurements - Part 2 : principles for determining the dimensions required for access openings
- NF L31-524:2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series.
- NF L50-150-202*NF EN 6059-202:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202 : dimensions and mass
- NF EN 3730:2010 Série aérospatiale - Colliers du type "Oméga" avec serrage ou coulissants en alliage d'aluminium avec profilé en élastomère - Dimensions, masses
- NF ISO 25358:2018 Équipement de protection des cultures - Spectres de taille des gouttes des systèmes d'atomisation - Mesurage et classification
- NF EN 547-2+A1:2008 Sécurité des machines - Mesures du corps humain - Partie 2 : principes de détermination des dimensions requises pour les orifices d'accés
- NF EN 547-2/IN1:2008 Sécurité des machines - Mesures du corps humain - Partie 2 : principes de détermination des dimensions requises pour les orifices d'accés
- NF X35-107-2*NF EN 547-2+A1:2008 Safety of machinery - Human body measurements - Part 2 : principles for determining the dimensions required for access openings.
- NF X35-107-2:1997 Safety of machinery. Human body measurements. Part 2 : principles for determining the dimensions required for access openings.
- NF E86-512-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3 : determination of required discharge - Capacity and sizing.
- NF EN 2591-102:1994 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essai - Partie A2 : examen des dimensions et masse
- NF L17-114*NF EN 4505:2014 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
- NF EN 3745-203:2008 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 203 : dimensions des câbles
- NF EN 3745-202:2018 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 202 : dimensions de la fibre
- NF L46-226*NF EN 4113:2010 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
- NF L31-606-002:2009 Aerospace series - Bushes, plain in aluminium alloy with selflubricating liner, elevated load - Part 2 : dimensions and loads - Inch series.
- NF L46-240*NF EN 3730:2010 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses
- NF L54-002-003*NF EN 2591-102:1994 Aerospace series. Elements of electrical and optical connection. Test methods. Part 102 : examination of dimensions and mass.
- NF EN 547-1+A1:2008 Sécurité des machines - Mesures du corps humain - Partie 1 : principes de détermination des dimensions requises pour les ouvertures destinées au passage de l'ensemble du corps dans les machines
- NF EN 547-1/IN1:2008 Sécurité des machines - Mesures du corps humain - Partie 1 : principes de détermination des dimensions requises pour les ouvertures destinées au passage de l'ensemble du corps dans les machines
- NF EN 2349-202:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 202 : examen des dimensions et masses
- NF X35-107-1*NF EN 547-1+A1:2008 Safety of machinery - Human body measurements - Part 1 : principles for determining the dimensions required for openings for whole body access into machinery
- NF L58-100-202*NF EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202 : examination of dimensions and mass
- NF EN ISO 29462:2022 Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité en fonction de la taille des particules et de la résistance à l'écoulement de l'air
- NF X35-107-1:1997 Safety of machinery. Human body measurements. Part 1 : principles for determining the dimensions required for openings for whole body access into machinery.
- NF L17-918:1997 Aerospace series. Parachute fabric. Tests on braided ropes/braids and narrow fabrics. Determination of dimensional variations after immersion in cold water.
- NF X35-107-1/IN1*NF EN 547-1/IN1:2008 Safety of machinery - Human body measurements - Part 1 : principles for determining the dimensions required for openings for whole body access into machinery
CEN - European Committee for Standardization, Full size measurement series
- EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats
- EN 4234:2006 Aerospace series - Clamps@ worm drive - Dimensions@ masses
German Institute for Standardization, Full size measurement series
- DIN EN 4730:2019 Aerospace series - Anthropometric dimensioning of aircraft seats; German and English version EN 4730:2018
- DIN EN 4730:2019-04 Aerospace series - Anthropometric dimensioning of aircraft seats; German and English version EN 4730:2018
- DIN 65219:2019-06 Aerospace series - Sealing rings - Dimensions, masses
- DIN EN 4115:2010-10 Aerospace series - Cushion, rubber for clamps - Dimensions, masses; German and English version EN 4115:2010
- DIN EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2020
- DIN EN 4234:2020-09 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2020
- DIN 3320-1:1984 Safety valves; safety shut-off valves; definitions, sizing, marking
- DIN EN 3841-202:2005-09 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses; German and English version EN 3841-202:2004 / Note: Applies in conjunction with DIN EN 3841-100 (2005-09).
- DIN EN 4234:2007 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2006
- DIN EN 547-3:2009 Safety of machinery - Human body measurements - Part 3: Anthropometric data; German version EN 547-3:1996+A1:2008
- DIN EN 6059-202:2017-03 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass; German and English version EN 6059-202:2016 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
- DIN 897:2007-11 Box wrenches, double-head, modified offset - Dimensions and test torques series A
- DIN EN 3841-202:2005 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses; German and English version EN 3841-202:2004
- DIN 1025-5:1994 Hot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties
- DIN 1025-5:1994-03 Hot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties
- DIN EN 4114:2010-09 Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses; German and English version EN 4114:2009 / Note: To be replaced by DIN EN 4114 (2022-07).
- DIN 43536:2012-06 Lead-acid batteries - Traction batteries 80 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN 43535:2012-06 Lead-acid batteries - Traction batteries 24 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN 43531:2012-06 Lead-acid batteries - Traction batteries 48 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN 896:2007-10 Tee wrenches socket, massive and tubular double head - Dimensions and test torques series A
- DIN EN 547-2:2009 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings (includes Amendment A1:2008); English version of DIN EN 547-2:2009-01
- DIN 1025-4:1994 Hot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties
- DIN 1025-3:1994 Hot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional properties
- DIN EN 4114:2023-05 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses; German version ASD-STAN prEN 4114:2023 / Note: Date of issue 2023-04-14*Intended as replacement for DIN EN 4114 (2010-09).
- DIN 45578-1:1987 Magnet systems for moving coil loudspeakers; definitions, dimensions, methods of measurement
- DIN 2276-1:1986-06 Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
- DIN 1025-2:1995 Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties
- DIN 1025-3:1994-03 Hot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional properties
- DIN EN 2591-102:1998-03 Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass; German version EN 2591-102:1996 / Note: Applies in conjunction with DIN EN 2591 (1992-12).
- DIN EN 4057-202:2007-04 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions; German and English version EN 4057-202:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
- DIN EN 4113:2010-09 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009 / Note: To be replaced by DIN EN 4113 (2022-07).
- DIN EN 4113:2023-05 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses; German version ASD-STAN prEN 4113:2023 / Note: Date of issue 2023-04-14*Intended as replacement for DIN EN 4113 (2010-09).
- DIN EN 3475-203:2006-08 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions; German and English version EN 3475-203:2006 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
- DIN 43535:2012 Lead-acid batteries - Traction batteries 24 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN 43536:2012 Lead-acid batteries - Traction batteries 80 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN 45578-1:1987-02 Magnet systems for moving coil loudspeakers; definitions, dimensions, methods of measurement
- DIN 1025-1:2009 Hot rolled I-sections - Part 1: Narrow flange I-sections, I-series - Dimensions, masses, sectional properties
- DIN 1025-4:1994-03 Hot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties
- DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
- DIN EN 4057-202:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions; German and English version EN 4057-202:2005
- DIN 1025-1:1995 Hot rolled I-beams - Part 1: Narrow flange I-beams, I-serie - Dimensions, masses, sectional properties
- DIN 2276-1:1986 Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
- DIN EN 547-2:2009-01 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings; German version EN 547-2:1996+A1:2008 / Note: DIN EN 547-2 (1997-02) remains valid alongside this standard until 2009-12-28.
- DIN EN IEC 61810-7-1:2022-08 All-or-nothing electrical relays - Tests and Measurements - Part 7-1: Visual inspection and check of dimensions (IEC 94/639/CD:2022); Text in German and English / Note: Date of issue 2022-07-29
- DIN EN 547-1:2009-01 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996+A1:2008 / Note: DIN EN 547-1 (1997-02) remains valid alongside th...
- DIN EN 4114:2022 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses; English version prEN 4114:2022
- DIN EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses; German and English version EN 4115:2010
- DIN 1025-1:2009-04 Hot rolled I-sections - Part 1: Narrow flange I-sections, I-serie - Dimensions, masses, sectional properties
- DIN EN 3745-202:2019-02 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions; German and English version EN 3745-202:2018
- DIN 43531:2012 Lead-acid batteries - Traction batteries 48 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
- DIN EN 4234:2015 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2015
- DIN EN 4234:2010 Aerospace series - Clamps, worm drive - Dimensions, masses; German and English version EN 4234:2009
- DIN EN 3730:2010-07 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses; German and English version EN 3730:2009
- DIN EN 547-1:2009 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996+A1:2008
- DIN EN 3745-203:2009-07 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions; German and English version EN 3745-203:2008 / Note: Applies in conjunction with DIN EN 3745-100 (2009-07).
- DIN EN 4113:2022 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses; English version prEN 4113:2022
- DIN EN 2349-202:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006
- DIN EN 1264-3:2009 Water based surface embedded heating and cooling systems - Part 3: Dimensioning; English version of DIN EN 1264-3:2009-11
- DIN EN 3745-205:2003-05 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002
- DIN EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006
- DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
- DIN EN 6029:2017 Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series; German and English version EN 6029:2017
- DIN 32567-3:2014 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices
- DIN EN 4114:2010 Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses; German and English version EN 4114:2009
- DIN EN 6059-202:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass; German and English version EN 6059-202:2016
- DIN 32567-5:2015 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5: Derivation of correction values for optical measuring devices
- DIN 32567-3:2014-10 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices
- DIN 32567-5:2015-06 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5: Derivation of correction values for optical measuring devices
- DIN EN 4505:2013 Aerospace series - Non-metalic materials - Textiles - Test method - Determination of dimensional stability; German and English version EN 4505:2013
- DIN EN 4505:2013-10 Aerospace series - Non-metalic materials - Textiles - Test method - Determination of dimensional stability; German and English version EN 4505:2013
- DIN 32567-2:2014 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures
- DIN EN 4113:2010 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009
- DIN 43537:2007-09 Lead-acid batteries - Traction batteries 24 V, 36 V, 48 V, 72 V, 80 V with cells for industrial trucks of Series E according to DIN EN 60254-2 - Dimensions, weights, design
- DIN 32567-4:2015 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4: Specimen for optical procedures
- DIN 32567-4:2015-06 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4: Specimen for optical procedures
- DIN 32567-2:2014-10 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures
- DIN EN 3730:2010 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses; German and English version EN 3730:2009
ES-UNE, Full size measurement series
- UNE-EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats (Endorsed by Asociación Española de Normalización in January of 2019.)
- UNE-EN 4234:2020 Aerospace series - Clamps, worm drive - Dimensions, masses (Endorsed by Asociación Española de Normalización in September of 2020.)
- UNE-EN 3841-202:2004 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses (Endorsed by AENOR in April of 2005.)
- UNE-EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses (Endorsed by AENOR in May of 2010.)
- UNE-EN 4057-202:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions (Endorsed by AENOR in March of 2006.)
- UNE-EN 6059-202:2016 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass (Endorsed by Asociación Española de Normalización in February of 2017.)
- UNE-EN 4113:2009 Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses (Endorsed by AENOR in December of 2009.)
- UNE-EN 4114:2009 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses (Endorsed by AENOR in December of 2009.)
- UNE-EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass (Endorsed by AENOR in March of 2007.)
- UNE-EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions (Endorsed by AENOR in August of 2006.)
- UNE-EN 4505:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability (Endorsed by AENOR in August of 2013.)
- UNE-EN 3730:2009 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses (Endorsed by AENOR in November of 2009.)
- UNE-EN 3745-202:2018 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions (Endorsed by Asociación Española de Normalización in December of 2018.)
- UNE-EN 3745-203:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions (Endorsed by AENOR in May of 2008.)
- UNE-EN 3745-205:2002 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 205: Cable longitudinal dimensional stability (Endorsed by AENOR in August of 2002.)
British Standards Institution (BSI), Full size measurement series
- BS EN 4730:2018 Aerospace series. Anthropometric dimensioning of aircraft seats
- BS EN 4234:2020 Aerospace series. Clamps, worm drive. Dimensions, masses
- BS EN 4234:2006 Aerospace series - Clamps, worm drive - Dimensions, masses
- BS EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- BS EN 4234:2015 Aerospace series. Clamps, worm drive. Dimensions, masses
- BS EN 3841-202:2005 Aerospace series - Circuit breakers - Test methods - Dimensions and masses
- BS EN 3841-202:2004 Circuit breakers-Test methods-Part 202:Dimensions and masses
- BS EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- 17/30362517 DC BS EN 4234. Aerospace series. Clamps, worm drive. Dimensions, masses
- BS EN 1264-3:1998 Floor heating - Systems and components - Dimensioning
- BS ISO/IEC 20926:2010 Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
- BS ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
- 22/30448405 DC Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses
- BS EN 6059-202:2016 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Dimensions and mass
- BS EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Examination of mass and dimensions
- BS EN 4057-202:2005 Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions
- BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
- BS EN 13648-3:2002(2008) Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
- BS EN 4114:2009 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
- BS EN 4505:2013 Aerospace series. Non-metallic materials. Textiles. Test method. Determination of dimensional stability
- BS ISO/IEC 29881:2011 Information technology. Systems and software engineering. FiSMA 1.1 functional size measurement method
- BS ISO/IEC 29881:2010 Information technology. Systems and software engineering. FiSMA 1.1 functional size measurement method
- 22/30448074 DC BS EN 61810-7-1. All-or-nothing electrical relays. Tests and Measurements - Part 7-1. Visual inspection and check of dimensions
- BS EN 6029:2017 Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series
- BS ISO 22093:2011 Industrial automation systems and integration. Physical device control. Dimensional Measuring Interface Standard (DMIS)
- BS EN 547-1:1996 Safety of machinery - Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
- BS EN 547-1+A1:1997 Safety of machinery. Human body measurements. Principles for determining the dimensions required for openings for whole body access into machinery
- BS EN 547-2:1997 Safety of machinery - Human body measurements - Principles for determining the dimensions required for access openings
- BS EN 547-2+A1:1997 Safety of machinery. Human body measurements. Principles for determining the dimensions required for access openings
- BS ISO 22098:2020 Ships and marine technology. Full-scale test method for propeller cavitation observation and hull pressure measurement
- BS EN 3730:2009 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses
- BS EN 4113:2009 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses
- BS EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1.Principles for determining the dimensions required for openings for whole body access into machinery
- PD IEC/TR 60664-2-1:2011 Insulation coordination for equipment within low-voltage systems. Application guide. Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
- BS EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Examination of dimensions and mass
- BS EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
- 19/30356340 DC BS ISO 22098. Ships and marine technology. Full-scale test method for propeller cavitation observation and hull pressure measurement
- BS EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2:Principles for determining the dimensions required for access openings
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Full size measurement series
- GB/T 13583-1992 Outline dimension series of infrared detectors
- GB/T 10077-1988 Maximum outside size and capacity series for lithium battery
- GB/T 3220-1982 Dimensional and capacity series for freight container spreader
- GB/T 1413-1998 Series 1 freight containers--Classification, dimensions and ratings
- GB/T 1413-2008 Series 1 freight containers-Classification,dimensions and ratings
- GB/T 1413-2023 Series 1 Container Classification, Dimensions and Rated Mass
- GB/T 26498-2011 Industrial automation systems and integration.Physical device control.Dimensional Measuring Interface Standard(DMIS)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Full size measurement series
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Full size measurement series
- GB/T 35201-2017 Series 2 freight containers—Classification, dimensions and ratings
European Committee for Standardization (CEN), Full size measurement series
- EN 4115:2001 Aerospace Series - Cushion, Rubber for Clamps - Dimensions, Masses
- EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- EN 4234:2015 Aerospace series - Clamps, worm drive - Dimensions, masses
- EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
- EN 3841-202:2004 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses
- EN 4114:2001 Aerospace Series - Clamps, Loop ("P" Type) in Aluminium Alloy with Rubber Cushioning - Dimensions, Masses
- EN 4114:2009 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses
- EN 6059-202:2016 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 202: Dimensions and mass
- EN 4505:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
- EN 4113:2009 Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
- EN 4113:2001 Aerospace Series - Clamps, Loop ("P" Type) in Corrosion Resisting Steel, Passivated with Rubber Cushioning - Dimensions, Masses
- EN 4057-202:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
- EN 2591-A2:1993 Aerospace Series- Elements of Electrical and Optical Connection - Test Methods - Part A2: Examination of Dimensions and Mass
- EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
- EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
- EN 3730:2001 Aerospace Series - Clamps, Saddle Fixed and Sliding Version in Aluminium Alloy with Rubber Cushioning - Dimensions, Masses
- EN 1264-3:2009 Water based surface embedded heating and cooling systems - Part 3: Dimensioning
- EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
- EN 2591-102:1996 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 102: Examination of Dimensions and Mass
- EN 3730:2009 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses
- EN 2791:1991 Rod Ends, Adjustable, Single Fork and Threaded Shank with Engagement: 1,5 x Thread DO Dimensions and Loads
- EN 2792:1991 Rod Ends, Adjustable, Double Fork and Threaded Shank with Engagement : 1,5 Thread DO Dimensions and Loads
- EN 547-2:1996 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings (Incorporates Amendment A1: 2008)
- EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
European Association of Aerospace Industries, Full size measurement series
- AECMA PREN 4115-1998 Aerospace Series Cushion, Rubber for Clamps Dimensions, Massess Edition P 1
- AECMA PREN 2903-1998 Aerospace Series Clamps Worm Drive Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4234]
- AECMA PREN 2904-1998 Aerospace Series Clamps - Saddle in Aluminium Alloy Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 3730]
- AECMA PREN 2905-1998 Aerospace Series Rubber Cushionings for Clamps Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4115]
- AECMA PREN 4234-2008 Aerospace series Clamps, worm drive Dimensions, masses Edition P 3
- AECMA PREN 2901-1998 Aerospace Series Clamps, Loop (<
> Type) with Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4113]
- AECMA PREN 2902-1998 Aerospace Series Clamps, Loop (<
> Type) with Rubber Cushioning in Aluminium Alloy Dimensions - Masses Issue P 1 [Refer To: ASD-STAN PREN 4114]
- AECMA PREN 4115-2008 Aerospace series Cushion, rubber for clamps Dimensions, masses Edition P 2
- AECMA PREN 2346-1986 Aerospace Series Fire Resistant Electrical Cables Dimensions, Conductor Resistance and Mass Issue P 1
- AECMA PREN 3841-202-1996 Aerospace Series Circuit Breakers Test Methods Part 202 : Dimensions and Masses Edition P 1
- AECMA PREN 3276-1988 Aerospace Series Clamps, Loop ("P" Type) without Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses Edition 1
- AECMA PREN 3446-1993 Aerospace Series Bearings, Precision Ball Without Flange in Corrosion Resisting Steel, for Instruments and Equipment Dimensions and Loads Edition 1
- AECMA PREN 4057-202-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 202: Examination of Mass and Dimensions Edition P 1
- AECMA PREN 2591-A2-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods - Part A2 - Examination of Dimensions and Mass Edition 1
- AECMA PREN 4114-2008 Aerospace series Clamps, loop (揚?type) in aluminium alloy, with rubber cushioning Dimensions, masses Edition P 2
- AECMA PREN 4234-2009 Aerospace series Clamps, worm drive Dimensions, masses Edition P 3; Incorporates CORR: 01-31-2009
- AECMA PREN 3730-1998 Aerospace Series Clamps, Saddle Fixed and Sliding Version in Aluminium Alloy with Rubber Cushioning Dimensions, Masses Edition P 1
- AECMA PREN 3629-1989 Aerospace Series Ball Bearings, Rigid in Corrosion Resisting Steel, for Control Cable Pulleys Dimensions and Loads Issue P 1
- AECMA PREN 6059-202-1997 Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 202: Dimensions and Mass Edition P 1
- AECMA PREN 3182-1989 Aerospace Series Ball Bearings, Rigid in Corrosion Resisting Steel Cadmium Plated, for Control Cable Pulleys Dimensions and Loads Issue P 1
- AECMA PREN 2349-202-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 202: Examination of Dimensions and Mass Edition P 1
- AECMA PREN 2079-1986 Aerospace Series Bearings, Precision Ball, in Corrosion Resisting Steel, for Instruments and Equipments, with Flange Dimensions and Loads Issue P 1
- AECMA PREN 3730-2008 Aerospace series Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning Dimensions, masses Edition P 2
- AECMA PREN 4113-2008 Aerospace series Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning ?Dimensions, masses Edition P 2;Incorporates CORR: 1-31-2009
Danish Standards Foundation, Full size measurement series
- DS/EN 4115:2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- DS/EN 4234:2009 Aerospace series - Clamps, worm drive - Dimensions, masses
- DS/ISO 668:1989 Series 1 freight containers. Classification, dimensions and ratings
- DS/EN 4114:2009 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
- DS/EN 3841-202:2005 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses
- DS/EN 4113:2009 Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
- DS/EN 3730:2009 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses
- DS/EN 547-2+A1:2011 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
- DS/EN 547-1+A1:2011 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
- DS/EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
- DS/EN 4505:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
- DS/EN 2591-A2:1994 Aerospace series-Elements of electrical and optical connection-Test methods-Part A2: Examination of dimensions and mass
- DS/EN 2591-102:1997 Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
- DS/EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
Lithuanian Standards Office , Full size measurement series
- LST EN 4234-2010 Aerospace series - Clamps, worm drive - Dimensions, masses
- LST EN 4115-2010 Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- LST EN 4114-2010 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
- LST EN 3841-202-2005 Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses
- LST EN 4113-2010 Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
- LST EN 3730-2010 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses
- LST EN 547-2-2000+A1-2009 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
- LST EN 547-1-2000+A1-2009 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
- LST EN 4057-202-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
- LST EN 2591-102-2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
- LST EN 2349-202-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
CH-SNV, Full size measurement series
PL-PKN, Full size measurement series
国家市场监督管理总局、中国国家标准化管理委员会, Full size measurement series
- GB/T 37645-2019 Size series and safety requirement of battery box for electric bicycle
HU-MSZT, Full size measurement series
CZ-CSN, Full size measurement series
- CSN 20 0300 Cast.16-1984 Measurements of geometrical accuracy of machine tools. Measuring methods. Di-mensional stability of cylindrical test workpieces of the samé series
IT-UNI, Full size measurement series
Group Standards of the People's Republic of China, Full size measurement series
- T/ZSM 0029-2023 vehicle and cargo outer contour dimension measurement system in motion
- T/GDAQI 74-2021 Test methods for insulating and sheathing materials of electric and optical cables—Automatic measurement of thickness and overall dimensions
BE-NBN, Full size measurement series
- NBN-EN 2641-1993 Aerospace series. Control cable assemblies. Combinations and dimensions
- NBN GH 01-001-1988 Freight containers - Series 1 freight containers - Classification, dimensions and ratings
- NBN-EN 2791-1993 Aerospace series. Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread phi. Dimensions and loads
International Organization for Standardization (ISO), Full size measurement series
- ISO 668:1995/Amd 1:2005 Series 1 freight containers - Classification, dimensions and ratings; Amendment 1
- ISO 668:1988 Series 1 freight containers; classification, dimensions and ratings
- ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
- ISO 668:1988/Amd 1:1993 Series 1 freight containers; classification, dimensions and ratings; amendment 1: 1AAA and 1BBB containers
- ISO/IEC 29881:2008 Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method
- ISO 22098:2020 Ships and marine technology — Full-scale test method for propeller cavitation observation and hull pressure measurement
- ISO 22093:2011 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
- ISO 22093:2003 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
Aerospace, Security and Defence Industries Association of Europe (ASD), Full size measurement series
- ASD-STAN PREN 4115-2008 Aerospace series Cushion, rubber for clamps Dimensions, masses (Edition P 2)
- ASD-STAN PREN 4234-2013 Aerospace series Clamps, worm drive Dimensions, masses (Edition P 4)
- ASD-STAN PREN 2346-1986 Aerospace Series Fire Resistant Electrical Cables Dimensions, Conductor Resistance and Mass (Issue P 1)
- ASD-STAN PREN 6059-202-2015 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 202: Dimensions and mass (Edition P 2)
- ASD-STAN PREN 3841-202-1996 Aerospace Series Circuit Breakers Test Methods Part 202 : Dimensions and Masses (Edition P 1)
- ASD-STAN PREN 4505-2001 Aerospace Series Textiles Test Method Determination of Dimensional Stability (Edition P 1)
- ASD-STAN PREN 3276-1988 Aerospace Series Clamps, Loop ("P" Type) without Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses (Edition 1)
- ASD-STAN PREN 4057-202-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 202: Examination of Mass and Dimensions (Edition P 1)
- ASD-STAN PREN 3745-202-2016 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 202: Fibre dimensions (Edition P 4)
- ASD-STAN PREN 3730-2008 Aerospace series Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning Dimensions, masses (Edition P 2)
- ASD-STAN PREN 2591-A2-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods - Part A2 - Examination of Dimensions and Mass (Edition 1)
- ASD-STAN PREN 2349-202-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 202: Examination of Dimensions and Mass (Edition P 1)
- ASD-STAN PREN 4061-1996 Aerospace Series Amorphous Foil in Filler Metal for Brazing Thickness 25 Micrometer Less Than or Equal to a Less Than or Equal to 64 Micrometer Dimensions (Edition P2)
- ASD-STAN PREN 4113-2008 Aerospace series Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses (Edition P 2;Incorporates CORR: 1-31-2009)
Standard Association of Australia （SAA）, Full size measurement series
- AS/NZS ISO/IEC 20926:2022 Software and systems engineering — Software measurement — IFPUG functional size measurement method 2009
- AS/NZS 4024.1703:2014
- AS/NZS 4024.1702:2014
- AS/NZS ISO/IEC 14143.6:2006 Information technology - Software measurement - Functional size measurement - Guide for use of ISO/IEC 14143 series and related International Standards
- AS ISO 22093:2004 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
- AS 4024.1702:2006 Safety of machinery - Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Full size measurement series
- GJB/J 6201-2008 Calibration specification for the large scale coordinate measurement system-laser tracker
Military Standard of the People's Republic of China-General Armament Department, Full size measurement series
- GJB 8624-2015 Large-scale measurement system - laser tracker calibration specifications
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Full size measurement series
- ASHRAE LO-09-067-2009 Field Measurements of Innovative Indoor Shading Systems in a Full-Scale Office Testbed
- ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
- ASHRAE 3705-1993 Comparative Study of Room Airflow: Numerical Prediction Using Computational Fluid Dynamics and Full- Scale Experimental Measurements
- ASHRAE KC-03-4-4-2003 Development of a Stereoscopic Particle Image Velocimetry System for Full-Scale Room Airflow Studies@ Part II: Experimental Setup
AENOR, Full size measurement series
- UNE-EN 2591-102:1996 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 102: EXAMINATION OF DIMENSIONS AND MASS.
- UNE-EN 547-2:1997+A1:2009 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
- UNE-EN 547-1:1997+A1:2009 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
Korean Agency for Technology and Standards (KATS), Full size measurement series
- KS M ISO 3126-2016(2021) Plastics piping system－Plastics piping components－Measurement and determination of dimensions
- KS V ISO 6764-2014(2019) Shipbuilding — Shipborne barges, series 1 — Lifting post casting — Arrangement, dimensions and method of testing
- KS X ISO/IEC 20926:2005 Software engineering-IFPUG 4.1 Unadjusted functional size measurement method-Counting practices manual
KR-KS, Full size measurement series
- KS M ISO 3126-2016 Plastics piping system－Plastics piping components－Measurement and determination of dimensions
RU-GOST R, Full size measurement series
- GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
- GOST 30534-1997 Means of measurement for linear and angular dimensions. Safety requirements and test methods
- GOST 16552-1986 Central conditioners. Series of rated capacities
- GOST 8.549-1986 The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances
- GOST R 8.699-2010 State system for ensuring the uniformity of measurements. Quantities, units, scales of measurement, which are used in global navigation satellite system
- GOST 8.191-1976 State system for ensuring the uniformity of measurement. State special standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,1 to 0,4 m at the frequency
- GOST R EN 547-2-2009 Safety of machinery. Human body measurement. Part 2. Principles for determining the opening dimensions required for access into machinery (machinery parts) by body parts
- GOST 8.413-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 0,40 to 0,75m at the frequency r
- GOST 8.414-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring radiation field parameters of antenna systems with operating dimensions of apertures from 1,5 to 3,0 m at the frequency ra
- GOST 8.193-1976 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring radiation field parameters of antenna systems with operating dimension of apertures from 0,75 to 1,5 m at the frequenc
- GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
- GOST 8.369-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec
- GOST R 8.672-2009 State system for ensuring the uniformity of measurements. Transducers with electric contacts for measuring the linear dimensions (parameters). Verification methods
American Society for Testing and Materials (ASTM), Full size measurement series
- ASTM C861-93(2014) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
- ASTM C861-93(2005) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
- ASTM C861-93(2010) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
ZA-SANS, Full size measurement series
- SANS 29881:2009 Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method
TH-TISI, Full size measurement series
- TIS 761.5-7-1991 Standard for modular coordination.part 5: principles and rules.part 6 series of preferred multimodular sizes for horizontal dimensions.part 7 sub-modular increments
AT-ON, Full size measurement series
- ONORM EN 2591-A2-1994 Aerospace series. Elements of electrical and optical connection. Test methods. Part A2: Examination of dimensions and mass
- ONORM EN 2791-1991 Aerospace series - Rod ends, adjustable, Single fork and threaded shank with engagement: 1,5 x thread 0 -Dimensions and loads
- ONORM EN 2790-1991 Aerospace series - Rod ends, adjustable, self-alignlng piain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread? - Dimensions and loads
- ONORM ISO 3019/2:1982 Hydraulic fluid power; Positive displacement pumps and motors; Dimensions and identiflcation codefor mounting flanges and shaft ends; 2- and 4-hole flanges and shaft ends; Metrie series
- ONORM EN 2792-1991 Aerospace series - Rod ends, adjustable, double fork and threaded shank with engagement: 1,5xthread0-Dimensions and loads
GOSTR, Full size measurement series
- GOST R EN 547-1-2008 Safety of machinery. Human body measurements. Part 1. Principles for determining the dimensions required for openings for whole body access into machinery
- GOST R 8.670-2009 State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
RO-ASRO, Full size measurement series
- STAS 8897-1989 Assembly tools for screws and nuts COMBINATION WRENCHES WITH TEST TORQUE SERIES A AND C Dimensions
- STAS 582-1989 Assembly tools for screws and nuts DOUBLE HEAD ENGINEERS WRENCH WITH TORQUES TEST SERIES D Dimensions
- STAS 581-1989 Assembly tools for screws and nuts SINGLE-HEAD ENGINEERS WRENCHES WITH TEST TORQUES SERIES D Dimensions
American National Standards Institute （ANSI), Full size measurement series
- ANSI/ASME B1.3M-1992 Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
- ANSI/ASME B1.3-2007 Screw Thread Gaging Systems for Dimensional Acceptability – Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
American Society of Mechanical Engineers (ASME), Full size measurement series
- ASME B1.3-2007 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
- ASME B1.3-2007(R2017) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
- ASME B1.3M-1992 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ)
- ASME B1.3M Errata-1994 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ); Errata
IEC - International Electrotechnical Commission, Full size measurement series
- TS 61400-23-2001 Wind Turbine Generator Systems - Part 23: Full-Scale Structural Testing of Rotor Blades (Edition 1.0)
Canadian Standards Association (CSA), Full size measurement series
- CSA ISO/IEC 14143-6-07-CAN/CSA:2007 Information technology ?Software measurement ?Functional size measurement ?Part 6: Guide for use of ISO/IEC 14143 series and related International Standards First Edition
Association of German Mechanical Engineers, Full size measurement series
- VDI/VDE 2630 Blatt 2.1-2015 Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors
International Electrotechnical Commission (IEC), Full size measurement series
- IEC TR 60664-2-1:2011/COR1:2011 Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of application of the IEC 60664 series, dimensioning examples and dielectric testing; Corrigendum 1
- IEC 60191-6-4:2003 Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of ball grid array (BGA)
Japanese Industrial Standards Committee (JISC), Full size measurement series
- JIS B 2292-1:2000 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 1: Inch series shown in metric units
- JIS B 2292-2:2000 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 2: Two-and four-hole flanges and shaft ends -- Metric series
ESDU - Engineering Sciences Data Unit, Full size measurement series
- ESDU 11006-2011 Extrapolating wind-tunnel data to full-scale Reynolds number Part 3: Example (ii) Comparison of extrapolated low-Reynolds-number lift measurements on the F4 wing/body with high-Reynolds-number measurements