ZH
RU
ES

Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy, Total:500 items.

In the international standard classification, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy involves: Fuels, Analytical chemistry, Non-ferrous metals, Ferrous metals, Beverages, Powder metallurgy, Refractories, Metalliferous minerals, Testing of metals, Environmental protection, Electrical engineering in general, Electronic components in general, Tea. Coffee. Cocoa, Inorganic chemicals, Road vehicle systems, Ferroalloys, Food products in general, Animal feeding stuffs, Products of non-ferrous metals, Water quality, Coals, Non-metalliferous minerals, Education, Organic chemicals, Farming and forestry, Construction materials, Optics and optical measurements, Iron and steel products, Lubricants, industrial oils and related products, Ceramics, Meat, meat products and other animal produce, Soil quality. Pedology, Conducting materials, Glass, Surface treatment and coating, Rubber, Rubber and plastics products, Products of the textile industry, Energy and heat transfer engineering in general, Insulating materials, Physics. Chemistry, Vocabularies, Wastes, Crude petroleum, Nuclear energy engineering, Fertilizers, Passenger cars. Caravans and light trailers.

American Society for Testing and Materials (ASTM), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM E1613-04 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D6357-11 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
ASTM D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D1976-07 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D1976-12 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D1976-96 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D1976-02 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D6357-21a Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM D6357-21b Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM D6357-00a Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, Graphite Furnace Atomic Absorption Spectrometry
ASTM D6357-04 Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, Graphite Furnace Atomic Absorption Spectrometry
ASTM UOP549-09 Sodium in Petroleum Distillates by ICP-OES or AAS
ASTM D5185-18 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma At
ASTM E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5184-01(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM E1277-96 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM E1613-99 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM D1976-19 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D1976-18 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D1976-20 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D4951-09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM C1301-95 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM C1301-22 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM C1301-95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM D8214-18 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM C1111-98 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D7691-11 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E2371-13 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2594-20 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
ASTM E1277-22 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E1277-23 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E1277-14 Standard Test Method for Analysis of Zinc-5â€‰% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM D7303-23 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E3061-17 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)

Professional Standard - Agriculture, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

72药典四部-2015 0411 Inductively coupled plasma atomic emission spectrometry
52药典四部-2020 0411 Inductively coupled plasma atomic emission spectrometry
776兽药典二部-2015 Appendix Contents 0400 Spectroscopy 0412 Inductively Coupled Plasma Atomic Emission Spectrometry
780兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0411 Inductively Coupled Plasma Atomic Emission Spectrometry
1808药典一部-2010 Appendix XI E Inductively Coupled Plasma Atomic Emission Spectrometry
781兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0412 Inductively Coupled Plasma Mass Spectrometry
775兽药典二部-2015 Appendix Contents 0400 Spectroscopy 0411 Inductively Coupled Plasma Mass Spectrometry
GB 10725-1989 General rules for chemical reagent inductively coupled high frequency plasma atomic emission spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
GB/T 4324.15-2008 Methods for chemical analysis of tungsten.Determination of magnesium content.The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 32179-2015 Chemical analysis of refractories.General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods
GB/T 23942-2009 Chemical reagent.General rules for inductively coupled plasma atomic emission spectrometry
GB/T 23199-2008 Determination of rare earth elments in tea.Inductive coupled plasma atomic emission spectrometer and inductive coupled plasma mass spectrometer
GB/T 4324.8-2008 Methods for chemical analysis of tungsten.Determination of nickel content.The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
GB/T 7731.14-2008 Ferrotungsten. Determination of lead content. The polarographic method and inductively coupled plasma-atomic emission spectrometry
GB/T 23545-2009 Determination of manganese in white wine.Inductively coupled plasma atomic emission spectrometry
GB/T 13747.9-2022 Methods for chemical analysis of zirconium and zirconium alloys—Part 9：Determination of magnesium content—Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectromet
GB/T 1871.5-2022 Determination of magnesium oxide content for phosphate rock and concentrate—Flame atomic absorption spectrometry，volumetry and inductively coupled plasma optical emission spectrometry
GB/T 7731.6-2008 Ferrotungsten.Determination of arsenic content.The molybdenum blue photometrie method and inductively coupled plasma-atomic emission spectrometry
GB/T 7717.16-2022 Acrylonitrile for industrial use—Part 16: Determination of iron and copper content—Graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry
GB/T 7731.9-2008 Ferrotungsten.Determination of bismuth content.The bismuth iodide photonmetric method and inductively coupled plasma-atomic emission spectrometry
GB/T 6730.84-2023 Determination of Total Rare Earth in Iron Ore by Inductively Coupled Plasma-Atomic Emission Spectrometry
GB/T 7731.8-2008 Ferrotungsten.Determination of antimony content.The tetraethlrhodamine photometrie method and inductively couple plasma-atomic mission spectrometry
GB/T 20125-2006 Low-alloy steel.Determination of multi-element contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 11067.4-2006 Methods for chemical analysis of silver. Determination of antimony content. The inductively coupled plasma atomic emission spectrometric method
GB/T 4324.13-2008 Methods of chemical analysis of tungsten Determination of calcium content Inductively coupled plasma atomic emission spectrometry
GB/T 7731.7-2008 Ferrotungsten. Determination of tin content. Phenylfluorone photometric method and inductively coupled plasma-atomic emission spectrometry
GB/T 11067.3-2006 Methods for chemical analysis of silver. Determination of selenium and tellurium content. Inductively coupled plasma atomic emission spectrometric method
GB/T 24583.8-2009 Vanadium-Nitrogen alloy.Determination of silicon，manganese，phosphorus，aluminum content.Inductively coupled plasma atomic emission spectrometric method
GB/T 42906-2023 Determination of Equivalent Boron Content in Graphite Materials Inductively Coupled Plasma Atomic Emission Spectrometry
GB/T 24514-2009 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 24585-2009 Ferronickel.Determination of phosphorus， manganese，chromium，copper，cobalt and silicon contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 24520-2009 Cast iron and low alloy steel-Determination of lanthanum,cerium and magnesium content-Inductively coupled plasma atomic emission spectrometric method
GB/T 5121.27-2008 Methods for chemical analysis of copper and copper alloys.Part 27:The inductively coupled plasma atomic emission spectromertric method
GB/T 20975.25-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 25:Inductively coupled plasma atomic emission spectrometric method
GB/T 17593.2-2007 Textiles.Determination of heavy metals.Part 2: Inductively coupled plasma atomic emission spectrometry
GB/T 17417.2-1998 Method for chemical analysis of rare earth ores--Determination of scandium content--ICP-AES method
GB/T 32794-2016 Pig iron contenting nickel.Determination of nickel, cobalt, chromium, copper, phosphorus content.Inductively coupled plasma atomic emission spectrometry
GB/T 10725-1989 Chemical reagent--General rules for industively coupled plasma atomic emission spectrometry
GB/T 24194-2009 Ferrosilicon.Determination of aluminium,clacium,managanese,chromium,titanium,copper,phosphorus and nickel content.Inductively coupled plasma atomic emission spectrometric method
GB/T 41769-2022 Methods for chemical analysis of cadmium zinc telluride—Determination of zinc and cadmium contents—Inductively coupled plasma atomic emission spectrometry
GB/T 13748.5-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of yttrium content.Inductively coupled plasma atomic emission spectrometric method
GB/T 24193-2009 Chromium ores and concentrates.Determination of aluminium,iron,magnesium and silicon content.Inductively coupled plasma atomic emission spectrometry
GB/T 23524-2009 Test method of spent petrochemical catalyst.Determination of platinum.Inductively coupled plasma atomic emission spectrometry
GB/T 24916-2010 Surface treatment solution.Determination of metal element contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 4324.7-2012 Methods for chemical analysis of tungsten.Part 7:Determination of cobalt content.Inductively coupled plasma atomic emission spectrometry
GB/T 4324.11-2012 Methods for chemical analysis of tungsten.Part 11:Determination of aluminum content.Inductively coupled plasma atomic emission spectrometry
GB/T 4324.21-2012 Methods for chemical analysis of tungsten.Part 21:Determination of chromium content.Inductively coupled plasma atomic emission spectrometry
GB/T 4324.22-2012 Methods for chemical analysis of tungsten.Part 22:Determination of manganese content.Inductively coupled plasma atomic emission spectrometry
GB/T 4325.12-2013 Methods for chemical analysis of molybdenum.Part 12:Determination of silicon content.Inductively coupled plasma atomic emission spectrometry
GB/T 4325.24-2013 Method for chemical analysis of molybdenum.Part 24:Determination of tungsten content.Inductively coupled plasma atomic emission spectrometry
GB/T 4324.20-2012 Methods for chemical analysis of tungsten.Part 20:Determination of vanadium content.Inductively coupled plasma atomic emission spectrometry

Professional Standard - Petrochemical Industry, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SH/T 0706-2001 Petroleum products-Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods
NB/SH/T 0824-2010 Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry

Japanese Industrial Standards Committee (JISC), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

JIS G 1258:1999 Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry
JIS M 8206:2014 Iron ores -- Inductively coupled plasma atomic emission spectrometric method
JIS K 1310-3:2000 Hydrochloric acid for industrial use -- Part 3: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Electrothermal type atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry
JIS K 1201-5:2000 Sodium carbonate for industrial use -- Part 5: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Atomic absorption spectrometry, and inductively coupled plasma atomic emission spectrometry
JIS G 1258 AMD 2:2005 Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry (Amendment 2)
JIS G 1258 AMD 1:2000 Iron and steel -- Methods for inductively coupled plasma atomic emission spectrometry (Amendment 1)
JIS K 1200-6:2000 Sodium hydroxide for industrial use -- Part 6: Determination of iron content -- Atomic absorption spectrometry and inductively coupled plasma atomic emission spectrophotometry
JIS G 1258-0:2007 Iron and steel -- ICP atomic emission spectrometric method -- Part 0: General rules

Professional Standard - Light Industry, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
GB/T 223.90-2021 Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.88-2019 Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 38233-2019 Iron-bearing dust and sludge- Determination of lead and zinc content- Inductively coupled plasma atomic emission spectrometry
GB/T 24583.8-2019 Vanadium-nitrogen—Determination of silicon, manganese, phosphorus, aluminum content—Inductively coupled plasma atomic emission spectrometric method
GB/T 5687.12-2020 Ferrochromium—Determination of phosphorus, aluminum, titanium, copper, manganese, calcium content—Inductively coupled plasma atomic emission spectrometric method
GB/T 39143-2020 Methods for chemical analysis of gold-arsenic alloys—Determination of arsenic content—Inductively coupled plasma atomic emission spectrometry
GB/T 8704.10-2020 Ferrovanadium—Determination of silicon, manganese, phosphorus, aluminum, copper, chromium, nickel and titanium contents— Inductively coupled plasma atomic emission spectrometric method

National Metrological Verification Regulations of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

JJG(教委) 07-1992 Inductively Coupled Plasma Atomic Emission Spectrometry Verification Regulations

Korean Agency for Technology and Standards (KATS), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D ISO 22033:2006 Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
KS D ISO 10278-2003(2018) Steel－Determination of manganese content－Inductively coupled plasma atomic emission spectrometric method
KS L ISO 21587-3-2012(2017) Chemical analysis of aluminosilicate refractory products－Part 3：Inductively coupled plasma and atomic absorption spectrometry methods
KS B ISO TR 17055-2008(2018) Steel－Determination of silicon content－Inductively coupled plasma atomic emission spectrometric method
KS D ISO 11435:2006 Nickel alloys－Determination of molybdenum－Inductively coupled plasma atomic emission spectrometric method
KS D ISO TS 18223:2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
KS D ISO 22033:2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
KS L ISO 21587-3-2012(2022) Chemical analysis of aluminosilicate refractory products－Part 3：Inductively coupled plasma and atomic absorption spectrometry methods
KS D ISO 22962:2010 Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry
KS M ISO 10478-2003(2018)
KS D ISO 22962-2010(2020) Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry
KS D ISO 10278:2003 Steel-Determination of manganese content-Inductively coupled plasma atomic emission spectrometric method
KS B ISO TR 17055:2008 Steel－Determination of silicon content－Inductively coupled plasma atomic emission spectrometric method
KS D ISO 11435:2021 Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
KS E ISO 11535-2011(2016) Iron ores－Determination of various elements－Inductively coupled plasma atomic emission spectrometric method
KS L ISO 20565-3-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
KS L ISO 20565-3-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D ISO 11435-2006(2016) Nickel alloys－Determination of molybdenum－Inductively coupled plasma atomic emission spectrometric method
KS D ISO 22033-2006(2016) Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
KS D ISO 17925-2006(2016) Zinc and/or aluminium based coatings on steel－Determination of coating mass per unit area and chemical composition－Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic
KS M ISO 10478:2003 Petroleum products－Determination of aluminium and silicon in fuel oils－Inductively coupled plasma emission and atomic absorption spectroscopy methods
KS L 1627-2014(2019) Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
KS D 1673-2007(2022) Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS D ISO 3815-2:2006 Zinc and zinc alloys－Part 2：Analysis by inductively coupled plasma optical emission spectrometry
KS E ISO 11535:2011 Iron ores－Determination of various elements－Inductively coupled plasma atomic emission spectrometric method
KS E ISO 11535:2021 Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method
KS D 1678-2012 Methods for inductively coupled plasma emission spectrometric analysis of aluminum and alumnium alloys
KS L 2018-2015(2020) Glass — Determination of lead and cadmium — Inductively coupled plasma emission spectrometric method
KS D 1674-2019 Methods for inductively coupled plasma spectrometric analysis of trace elements in gold
KS D 1678-2022 Methods for inductively coupled plasma emission spectrometric analysis of aluminum and aluminium alloys
KS D ISO 17925:2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
KS D ISO 3815-2:2021 Zinc and zinc alloys — Part 2: Analysis by inductively coupled plasma optical emission spectrometry
KS M 1080-2008(2018) Determination of lead and cadmium in foam for impact absorption
KS L ISO 21587-3:2012 Chemical analysis of aluminosilicate refractory products-Part 3:Inductively coupled plasma and atomic absorption spectrometry methods
KS D 1939-2003(2013) Chemical analysis of zinc alloys by inductively coupled plasma emission spectrometric method
KS D 1673-2007(2017) Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS M 2618-2008 Determination of additive elements, wear metals, contaminants and selected elements in used lubricating oils and base oils-Inductively coupled plasma atomic emission spectrometry
KS L ISO 10058-3-2012(2022) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
KS L 1627-2014 Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
KS L ISO 10058-3:2012 Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
KS L ISO 20565-3:2012 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)-Part 3:Flame atomic absorption spectrometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
KS D ISO 17925:2006 Zinc and/or aluminium based coatings on steel－Determination of coating mass per unit area and chemical composition－Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
KS D ISO 3815-2-2006(2016) Zinc and zinc alloys－Part 2：Analysis by inductively coupled plasma optical emission spectrometry
KS I ISO 11885-2008(2018) Water quality－Determination of selected elements by inductively coupled plasma optical emission spectrometry(ICP-OES)

RU-GOST R, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

GOST R 52371-2005 Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry
GOST R ISO 22033-2014 Nickel alloys. Determination of niobium. Inductively coupled plasma/atomic emission spectrometric method
GOST R ISO 22725-2014 Nickel alloys. Determination of tantalum. Inductively coupled plasma atomic emission spectrometric method
GOST R 51927-2002 Steel and cast iron. Atomic emission nith inductively coupled plasma spectral method of calcium determination
GOST R ISO 17925-2012 Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
GOST R 54237-2010 Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST R 54237-2010(2019) Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
GOST R 54921-2012 Zink concentrates. Atomic emission spectroscopy with inductively coupled plasma. Determination of copper, lead, cadmium, iron, aluminum, cobalt, antimony, manganese, arsenic and indium

British Standards Institution (BSI), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DD ENV 14029-2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
DD ENV 14029:2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
BS EN 15605:2010 Copper and copper alloys.Inductively coupled plasma optical emission spectrometry
DD ENV 13800-2000 Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS DD ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
DD ENV 14138:2001 Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation
BS DD ENV 14138:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation
BS ISO 13933:2014 Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method
BS ISO 22962:2008 Titanium and titanium alloys - Determination of iron - Inductively coupled plasma atomic emission spectrometry
BS DD ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
18/30372392 DC BS ISO 23166. Nickel alloys. Determination of tantalum. Inductively coupled plasma atomic emission spectrometric method
BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS ISO 21339:2023 6Al-4V titanium alloys. Determination of aluminium and vanadium contents. Inductively coupled plasma atomic emission spectrometric method
BS EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Inductively coupled plasma and atomic absorption spectrometry methods
BS EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
BS EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-A
BS EN ISO 3815-2:2005 Zinc and zinc alloys - Analysis by inductively coupled plasma optical emission spectrometry
BS ISO 4155:2022 Magnesium and magnesium alloys. Determination of nickel. Inductively coupled plasma optical emission spectrometric method
BS ISO 20258:2018 Magnesium lithium alloys. Determination of lithium. Inductively coupled plasma optical emission spectrometric method
BS EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
BS EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
21/30414276 DC BS ISO 4188. Magnesium and magnesium alloys. Determination of arsenic. Inductively coupled plasma optical emission spectrometric method
21/30414273 DC BS ISO 4181. Magnesium and magnesium alloys. Determination of strontium. Inductively coupled plasma optical emission spectrometric method
21/30414279 DC BS ISO 4189. Magnesium and magnesium alloys. Determination of sodium. Inductively coupled plasma optical emission spectrometric method
21/30414270 DC BS ISO 4177. Magnesium and magnesium alloys. Determination of chromium. Inductively coupled plasma optical emission spectrometric method
21/30414267 DC BS ISO 4155. Magnesium and magnesium alloys. Determination of nickel. Inductively coupled plasma optical emission spectrometric method
20/30372090 DC BS ISO 23156. Ferronickels. Determination of phosphorus, manganese, chromium, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method
BS EN 16317:2013+A1:2017 Fertilizers and liming materials. Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
BS ISO 19976-2:2019 Copper, lead and zinc sulfide concentrates. Determination of cadmium - Acid digestion and inductively coupled plasma atomic emission spectrometric method
23/30454447 DC BS ISO 21339. Titanium and titanium alloys. Ti-6Al-4V. Determination of aluminium and vanadium contents. Inductively coupled plasma atomic emission spectrometric method

Association Francaise de Normalisation, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
XP A06-422*XP ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
XP A06-421*XP ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
XP A06-424*XP ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation
NF A08-920:2008 Nickel alloys - Determination of tantalum - Inductively coupled plasma atomic emission spectrometric method.
NF A08-702*NF EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
NF B40-672*NF EN ISO 26845:2008 Chemical analysis of refractories . General requirements for wet chemicals analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
NF A08-314*NF EN 10361:2016 Alloyed steels - Determination of Nickel content - Inductively coupled plasma optical emission spectrometric method
FD A06-327*FD CEN/TR 10367:2019 Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method
NF B49-435-3*NF EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP
NF A06-840-2*NF EN ISO 3815-2:2005 Zinc and zinc alloys - Part 2 : analysis by inductively coupled plasma optical emission spectrometry
NF EN ISO 3815-2:2005 Zinc et alliages de zinc - Partie 2 : analyse par spectrométrie d'émission optique avec source à plasma à couplage inductif
NF A06-012*NF EN 14242:2005 Aluminium and aluminium alloys - Chemical analysis - Inductive coupled plasma-optical emission spectrometric method
NF B49-329-3*NF EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
NF U42-418/IN1*NF EN 16317/IN1:2017 Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
NF U42-418*NF EN 16317+A1:2017 Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution

International Organization for Standardization (ISO), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

ISO 22033:2011 Nickel alloys - Determination of niobium - Inductively coupled plasma/atomic emission spectrometric method
ISO 22725:2007 Nickel alloys - Determination of tantalum - Inductively coupled plasma atomic emission spectrometric method
ISO 22033:2005 Nickel alloys - Determination of niobium - Inductively coupled plasma atomic emission spectrometric method
ISO 11435:2005 Nickel alloys - Determination of molybdenum - Inductively coupled plasma atomic emission spectrometric method
ISO 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
ISO 11435:2011 Nickel alloys - Determination of molybdenum content - Inductively coupled plasma/atomic emission spectrometric method
ISO 13933:2014 Steel and iron - Determination of calcium and magnesium - Inductively coupled plasma atomic emission spectrometric method
ISO 22962:2008 Titanium and titanium alloys - Determination of iron - Inductively coupled plasma atomic emission spectrometry
ISO/TS 18223:2015 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric method
ISO/TR 17055:2002 Steel - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method
ISO 11535:1998 Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method
ISO 21339:2023 6Al-4V titanium alloys — Determination of aluminium and vanadium contents — Inductively coupled plasma atomic emission spectrometric method
ISO 4155:2022 Magnesium and magnesium alloys — Determination of nickel — Inductively coupled plasma optical emission spectrometric method
ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
ISO/DIS 4181 Magnesium and magnesium alloys — Determination of strontium — Inductively coupled plasma optical emission spectrometric method
ISO/DIS 4189 Magnesium and magnesium alloys — Determination of sodium — Inductively coupled plasma optical emission spectrometric method
ISO/DIS 4177 Magnesium and magnesium alloys – Determination of chromium – Inductively coupled plasma optical emission spectrometric method
ISO/DIS 4188 Magnesium and magnesium alloys – Determination of arsenic – Inductively coupled plasma optical emission spectrometric method
ISO/DTS 4189:1972 Magnesium and magnesium alloys — Determination of sodium — Inductively coupled plasma optical emission spectrometric method
ISO/DTS 4177:1972 Magnesium and magnesium alloys – Determination of chromium – Inductively coupled plasma optical emission spectrometric method
ISO/DTS 4181:1972 Magnesium and magnesium alloys — Determination of strontium — Inductively coupled plasma optical emission spectrometric method
ISO/DTS 4188:1972 Magnesium and magnesium alloys – Determination of arsenic – Inductively coupled plasma optical emission spectrometric method
ISO 10478:1994 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
ISO/PRF 21339:2023 Titanium and titanium alloys — Ti-6Al-4V — Determination of aluminium and vanadium contents — Inductively coupled plasma atomic emission spectrometric method
ISO/DIS 21339:1972 Titanium and titanium alloys — Ti-6Al-4V — Determination of aluminium and vanadium contents — Inductively coupled plasma atomic emission spectrometric method
ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
ISO 11535:2006 Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method
ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
ISO 3815-2:2005 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
ISO 17925:2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
ISO 10278:1995 Steel - Determination of maganese content - Inductively coupled plasma atomic emission spectrometric method
ISO 23166:2018 Nickel alloys — Determination of tantalum — Inductively coupled plasma optical emission spectrometric method

German Institute for Standardization, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DIN V ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation; German version ENV 14138:2001
DIN EN 15605:2010-12 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010
DIN ISO 10478:2016-07 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods (ISO 10478:1994)
DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008
DIN EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013); German version EN 62321-4:2014
DIN V ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix; German version ENV 13800:2000
DIN V ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix; German version ENV 14029:2001
DIN CEN/TS 15605:2008 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version CEN/TS 15605:2007
DIN EN ISO 21587-3:2007-12 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); German version EN ISO 21587-3:2007
DIN EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013); German version EN 62321-5:2014
DIN EN 62321-4:2018 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013 + A1:2017); German version EN 62321-4:2014 + A1:2017
DIN EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); English version of DIN EN ISO 26845:20
DIN EN 10361:2016 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method
DIN EN 10361:2016-02 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method; German version EN 10361:2015
DIN EN ISO 3815-2:2005-10 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005); German version EN ISO 3815-2:2005
DIN EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004
DIN EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); English version of DIN EN ISO 21587-3:2007-12
DIN 51790-4:2011-02 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 4: Determination by atomic absorption spectrometry (AAS) or by optical emission spectral analysis with inductively coupled plasma (ICP OES) after incineration
DIN EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
DIN EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
DIN EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry; German version EN 15605:2010
DIN 51790-4:2011 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 4: Determination by atomic absorption spectrometry (AAS) or by optical emission spectral analysis with inductively coupled plasma (ICP OES) after incineration
DIN ISO 10478:2016 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods (ISO 10478:1994)

Danish Standards Foundation, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DS/ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
DS/EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
DS/ENV 13800:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
DS/ENV 14138:2002 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation by co-precipitation
DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
DS/EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
DS/EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
DS/EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
DS/ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
DS/EN ISO 3815-2:2005 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
DS/EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)

International Electrotechnical Commission (IEC), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS

Lithuanian Standards Office , Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

LST EN 15605-2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)
LST EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008)
LST EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
LST EN 14242-2005 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
LST L ENV 14226-2004 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
LST EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)

AENOR, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

UNE-EN 15605:2011 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
UNE 38863:2012 Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry.
UNE-EN ISO 21587-3:2008 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)

Shandong Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB37/T 3040-2017 Determination of Chromium in Feed by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB37/T 3042-2017 Determination of Molybdenum in Feedstuffs by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB37/T 1092-2008 Determination of Chromium in Food by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB37/T 3041-2017 Determination of Phosphorus and Sulfur in Feedstuffs by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB37/T 2060-2012 Determination of Chromium in Fertilizers by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES)
DB37/T 2059-2012 Determination of Lead and Cadmium in Fertilizers Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES)

Sichuan Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB51/T 1046-2010 Determination of Aluminum in Food by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB51/T 1031-2010 Determination method of rare earth in tea - Inductively coupled plasma atomic emission spectrometry
DB51/T 1520-2012 Determination of Total Chromium in Soil by Inductively Coupled Plasma Emission Spectrometry
DB51/T 1697-2013 Determination of Iron Content in Gasoline by Inductively Coupled Plasma Emission Spectrometry
DB51/T 1695-2013 Determination of Lead Content in Gasoline by Inductively Coupled Plasma Emission Spectrometry
DB51/T 1696-2013 Determination of Manganese Content in Gasoline by Inductively Coupled Plasma Emission Spectrometry
DB51/T 1692-2013 Determination of Silicon Content in Gasoline by Inductively Coupled Plasma Emission Spectrometry
DB51/T 2038-2015 Determination of content of vanadium aluminum alloy silicon, iron and other 15 impurity elements by inductively coupled plasma atomic emission spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
GB/T 34333-2017 Refractory products—Determination by inductively coupled plasma atomic emission spectrometry(ICP-AES)
GB/T 34208-2017 Iron and steel—Determination of antimony and tin content—Inductively coupled plasma atomic emission spectrometric method
GB/T 4702.6-2016 Chromium metal—Determination of iron, aluminium, silicon and copper content—Inductively coupled plasma atomic emission spectrometry method
GB/T 33465-2016 Determination of chlorine and silicon in gasoline by inductively coupled plasma optical emission spectrometry（ICP-OES）
GB/T 5195.16-2017 Fluorspar—Determination of silicon, aluminum, iron, potassium, magnesium and titanium content—Inductively coupled plasma atomic emission spectrometry
GB/T 33422-2016 Thermoplastic elastomer—Determination of heavy metal contents— Inductively coupled plasma atomic emission spectrometric method
GB/T 33324-2016 Determination of heavy metal content of latex products—Inductively coupled plasma atomic emission spectrometry

工业和信息化部, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

YS/T 1171.13-2021 Methods for chemical analysis of recycled zinc raw materials Part 13: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 445.14-2019 Methods for chemical analysis of silver concentrates Part 14: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 461.12-2016 Methods for chemical analysis of mixed lead-zinc concentrates Part 12: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 1057.4-2022 Methods for chemical analysis of cobalt tetroxide Part 4: Determination of potassium and sodium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 1157.3-2016 Methods for chemical analysis of crude cobalt hydroxide Part 3: Determination of calcium and magnesium content Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
SJ/T 11698-2018 Lead-free solder chemical analysis method Inductively coupled plasma atomic emission spectrometry
YS/T 716.7-2016 Methods for chemical analysis of black copper Part 7: Determination of platinum and palladium amounts Fire assay gold enrichment-inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
YB/T 4983-2022 Determination of phosphorus, iron, phosphorus, silicon, manganese and titanium content by inductively coupled plasma atomic emission spectrometry
YB/T 4799-2018 Determination of the precipitated phase amount of aluminum nitride in steel by electrolytic separation-inductively coupled plasma atomic emission spectrometry
YB/T 4739-2019 Determination of chromium, iron, phosphorus, aluminum, titanium, copper, manganese and calcium content by inductively coupled plasma atomic emission spectrometry
YB/T 4566.4-2016 Determination of silicon, manganese, phosphorus and aluminum content in ferrovanadium nitride by inductively coupled plasma atomic emission spectrometry
YS/T 1531-2022 Chemical analysis methods for rhodium carbon - Determination of rhodium content - Inductively coupled plasma atomic emission spectrometry
YB/T 4583.2-2017 Determination of potassium oxide and sodium oxide content in mullite by inductively coupled plasma atomic emission spectrometry
YS/T 1476-2021 Chemical Analysis Methods for Zircon Sand Determination of Barium Content Inductively Coupled Plasma Atomic Emission Spectrometry
YS/T 1346-2020 Chemical Analysis Methods for Copper-Arsenic Filter Cake Determination of Rhenium Content by Inductively Coupled Plasma Atomic Emission Spectrometry
YS/T 1261-2018 Hafnium Chemical Analysis Method Determination of Impurity Element Content Inductively Coupled Plasma Atomic Emission Spectrometry
YS/T 1315-2019 Chemical Analysis Methods for Palladium Absorbing Resin Determination of Palladium Content Fire Assay Gold Enrichment-Inductively Coupled Plasma Atomic Emission Spectrometry

Group Standards of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

T/CSTM 00014-2019 Iron and steel-Determination of silicon content- Inductively coupled plasma atomic emission spectrometric method
T/CMES 08007-2020 Determination of manganese, iron and phosphorus content by inductively coupled plasma atomic emission spectrometry
T/CMES 08002-2020 Determination of Ferroniobium Impurity Elements by Inductively Coupled Plasma Atomic Emission Spectrometry
T/NXCL 024-2023 Method for chemical analysis of beryllium — Determination of beryllium oxide content—Inductively coupled plasma atomic emission spectrometry
T/CMES 08008-2020 Determination of molybdenum, iron, phosphorus, copper, silicon, tin, antimony by inductively coupled plasma atomic emission spectrometry
T/CBMF 101-2021 Methods for chemical analysis of carbonate rocks—Inductively coupled plasma atomic emission spectrometry method
T/QAS 057-2021 Determination of Lithium in Brine by Inductively Coupled Plasma Emission Spectrometry
T/QAS 051-2021 Determination of boron in brine by inductively coupled plasma emission spectrometry
T/QAS 040-2021 Determination of silicon brine by inductively coupled plasma emission spectrometry
T/CMES 08001-2020 Determination of Ferrochrome Impurity Elements by Inductively Coupled Plasma Primary Emission Spectrometry
T/WSJD 004-2020 Determination of multi-element contents in hair— Inductively coupled plasma atomic emission spectrometry
T/CIQA 8-2020 Determination of Antimony and Bismuth in Lead Concentrate by Inductively Coupled Plasma-Atomic Emission Spectrometry
T/QAS 041-2021 Determination of barium and strontium in brine by inductively coupled plasma emission spectrometry
T/QAS 052-2021 Determination of total iron in brine by inductively coupled plasma emission spectrometry
T/CBMF 100-2021 Methods for chemical analysis of gypsum and gypsum products—Inductively coupled plasma atomic emission spectrometry method
T/CBMF 99-2021 Determination of glass, glazes and their raw materials—Inductively coupled plasma atomic emission spectrometry method
T/QAS 064-2021 Determination of copper, lead, zinc and arsenic in brines by inductively coupled plasma emission spectrometry
T/CNIA 0012-2019 Determination of Boron, Phosphorus, Iron, Aluminum, Calcium, Titanium Content in Silicon Powder - Inductively Coupled Plasma Atomic Emission Spectrometry
T/CES 017-2018 Determination of Sulfur in Insulating Oils_Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
T/SATA 028-2022 Determination of multi elements in feed by inductively coupled plasma optical emission spectrometry method
T/NAIA 0195-2023 Determination of hexavalent chromium in soil by inductively coupled plasma emission spectrometry
T/SASJL 0005-2023 Determination of lead, cadmium and total chromium in brake linings for automobiles——Inductively coupled plasma atomic emission spectrometry

ZA-SANS, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SANS 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy

Yunnan Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB53/T 897-2018 Determination of germanium content in coal by inductively coupled plasma atomic emission spectrometry
DB53/T 421-2012 Determination of boron in industrial silicon by inductively coupled plasma atomic emission spectrometry
DB53/T 667-2015 Determination of multielement content in hair by inductively coupled plasma atomic emission spectrometry
DB53/T 422-2012 Determination of Phosphorus, Manganese, Titanium, Chromium, Copper, Vanadium in Ferrophosphorus - Inductively Coupled Plasma Atomic Emission Spectrometry

海关总署, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SN/T 5304-2021 Determination of total sulfur and phosphorus in coal by inductively coupled plasma atomic emission spectrometry

KR-KS, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

KS D ISO TS 18223-2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
KS D ISO 22033-2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
KS D ISO 11435-2021 Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
KS E ISO 11535-2021 Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method
KS D ISO 17925-2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
KS D ISO 3815-2-2021 Zinc and zinc alloys — Part 2: Analysis by inductively coupled plasma optical emission spectrometry

未注明发布机构, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods

Professional Standard - Ferrous Metallurgy, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

YB/T 4395-2014 Steel.Determination of molybdenum, niobium and tungsten contents.Inductively coupled plasma atomic emission spectrometric method
YB/T 4462-2015 High purity ferrosilicon.Determination of boron content.Inductively coupled plasma atomic emission spectrometric method
YB/T 4461-2015 High purity ferrosilicon.Determination of zirconium and molybdenum content.Inductively coupled plasma atomic emission spectrometric method
YB/T 4396-2014 Stainless steel.Determination of multi-element contents.Inductively coupled plasma atomic emission spectrometric method
YB/T 4394-2014 Molybdenum oxide.Determination of cooper, phosphorus, tin and antimony content.Inductively coupled plasma atomic emission spectrometry
YB/T 4200-2009 Determination of vanadium pentoxide sulfur; phosphorus; arsenic and iron content by inductively coupled plasma atomic emission spectrometry
YB/T 4174.1-2008 Determination of Aluminum Content in Silicon Calcium Alloy by Inductively Coupled Plasma Emission Spectrometry
YB/T 4174.2-2008 Determination of Phosphorus Content in Silicon Calcium Alloy Inductively Coupled Plasma Emission Spectrometry
YB/T 190.12-2014 Continuous casting mould powder.The determination of boron trioxide content.The inductively coupled plasma atomic emission spectrometric method
YB/T 6088-2023 Determination of ferrosilicon nitride calcium, aluminum, chromium, manganese, titanium, phosphorus content by inductively coupled plasma atomic emission spectrometry

European Committee for Standardization (CEN), Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
DD ENV 14138-2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) after separation by co-precipitation
EN ISO 11885:1997 Water Quality - Determination of 33 Elements by Inductively Coupled Plasma Atomic Emission Spectroscopy ISO 11885:1996
EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
EN 10361:2015 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method
CEN/TR 10367:2019 Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method
DD ENV 955-4-1997 Chemical Analysis of Refactory Products - Part 4: Products Containing Silica and/or Alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP))
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)

Professional Standard - Commodity Inspection, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SN/T 2718-2010 Determination of chemical composition in stainless steel-Inductively coupled plasma atomic emission spectrometric method
SN/T 1600-2005 Determination of Trace Elements in Coal by Inductively Coupled Plasma-Atomic Emission Spectrometry
SN/T 2698-2010 Elemental analysis of impurities in tungsten products.Inductively coupled plasma atomic emission spectrometric method
SN/T 1599-2005 Determination of Main Components in Coal Ash by Inductively Coupled Plasma-Atomic Emission Spectrometry
SN/T 2953-2011 Determination of silicon, manganese, phosphorus and chromium in pig iron by inductively coupled plasma atomic emission spectrometry
SN/T 3301-2012 Determination of manganese,iron,lead in gasoline.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
SN/T 2254-2009 Determination of aluminum,silicon,vanadium in residual fuel oils.Inductively coupled plasma atomic emission spectrometry
SN/T 3363-2012 Determination of impurity elements in pig lead.Inductively coupled plasma atomic emission spectrometry
SN/T 3320.1-2012 Ferromanganeses.Part 1:Determination of manganese content.Inductively coupled plasma atomic emission spectrometry
SN/T 1112-2002 Determination of Chemical Composition in Aluminum Ingots by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES)
SN/T 2186-2008 Determination of soluble lead,cadmium,chromium and mercury in paints.Inductively coupled plasma atomic emission spectrometry
SN/T 4304-2015 Determination of aluminum, magnesium, lead, silicon in barium chloride dihydrate for export.Inductively coupled plasma atomic emission spectrometry
SN/T 2259-2009 Determination of chemical components in high purity copper cathode.Inductively coupled plasma atomic emission spectrometry
SN/T 4312-2015 Determination of Total Rare Earth in Ceramic Color Glazes by Inductively Coupled Plasma Atomic Emission Spectrometry
SN/T 4024-2013 Determination of sodium, potassium and vanadium content in coal tar oil and anthracene oil.Inductively coupled plasma atomic emission spectrometry
SN/T 3713-2013 Screening of chromium pigment in paints.Inductively coupled plasma atomic emission spectrometry
SN/T 3708-2013 Determination of silicon and phosphorus content in ferrochromium.Microwave digestion-inductively coupled plasma atomic emission spectrometric method
SN/T 1427-2004 Determination of silicon,iron,phosphorus in manganese metal--Inductively coupled plasma atomic emission spectrometry
SN/T 1911-2007 Determination of lead and arsenic contents in paper used for cigarettes for import-export by ICP-AES
SN/T 3367-2012 Determination of titanium,aluminum,silicon,phosphor,copper and manganese content in ferrotitanium.Inductively coupled plasma atomic emission spectrometry
SN/T 2264-2009 Determination of Cu,Fe,Mg,Mn,Si,Ti,V,Zn and Zr in aluminun alloys.Inductively coupled plasma atomic emission spectrometry
SN/T 2004.4-2006 Determination of Lead, Cadmium, Chromium and Mercury in electrical and electronic equipments - Part 4: Inductively coupled plasma atomic emission spectrometric method
SN/T 2047-2008 Determination of impurities in copper concentrates for import.Inductively coupled plasma atomic emission spectrometry
SN/T 3323.3-2012 Mill scale.Part 3:Determination of lead,chromium,cadmium.Inductively coupled plasma atomic emission spectrometry
SN/T 3510-2013 Determination of arsenic、cadmium、copper、nickel、lead、zinc in lead ore for import and export.Inductively coupled plasma atomic emission spectrometric method
SN/T 3007-2011 Determination of arsenic,lead,copper,iron,selenium,bismuth content in metal antimony. Inductively coupled plasma atomic emission spectrometry
SN/T 2592.6-2011 Determination of organotin compounds in electrical and electronic equipment. Part 6:Inductively coupled plasma atomic emission spectrometry

Anhui Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB34/T 3691-2020 Determination of hexavalent chromium in coal ash by inductively coupled plasma atomic emission spectrometry
DB34/T 2271-2014 Determination of cold miscellaneous copper copper, arsenic, lead, bismuth, antimony, zinc, nickel electrolytic-inductively coupled plasma atomic emission spectrometry
DB34/T 2581-2015 Method for chemical analysis of copper arsenic filter cake Determination of rhenium content Inductively coupled plasma atomic emission spectrometry

Professional Standard - Non-ferrous Metal, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

YS/T 586-2006 Method for chemical analysis of copper and copper alloys. The inductively copuled plasma atomic emission spectromertic method
YS/T 1072-2015 Chemical analysis methods of palladium-carbon.Determination of palladium contents.Inductively coupled plasma-atomic emission spectrometry
YS/T 1073-2015 Chemical analysis methods of palladium-carbon.Determination of plumbum,cuprum and iron contents.Inductively coupled plasma-atomic emission spectrometry
YS/T 666-2008 Chemical analysis methods of gallium for industrial use.Determination of impurity elements.Inductively coupled plasma atomic emission spectrometric method
YS/T 227.7-2010 Methods for chemical analysis of tellurium-Part 7: Determination of sulphur content-Inductively coupled plasma-atomic emission spectrometry

Professional Standard - Education, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

JY/T 0567-2020 General rules for inductively coupled plasma optical emission spectrometry

Standard Association of Australia （SAA）, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

AS 4119:2007 Determination of platinum and palladium in gold and gold bearing alloys - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods)
AS 3641.2:1999 Recommended practice for atomic emission spectrometric analysis - Inductively coupled plasma excitation
AS 3515.4:2007 Gold and gold bearing alloys - Determination of gold content (greater than 99.95 percent) - Inductively coupled plasma - Atomic emission spectrometry
AS/NZS 3641.2:1999 Recommended practice for atomic emission spectrometric analysis Part 2: Inductively coupled plasma excitation

Professional Standard - Environmental Protection, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

HJ 509-2009 Determination of Platinum,Palladium and Rhodium loading in the vehicle-used ceramic catalytic converters.Inductive coupled plasma-optical emission spectrometry and inductive coupled plasma-mass spectrometry
HJ 776-2015 Water quality – Determination of 32 elements-Inductively coupled plasma optical emission spectrometry

Hebei Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB13/T 2855-2018 Determination of molybdenum iron silicon, phosphorus and copper content by inductively coupled plasma atomic emission spectrometry
DB13/T 2856-2018 Determination of iron ore potassium and sodium content by inductively coupled plasma atomic emission spectrometry
DB13/T 5589-2022 Determination of phosphorus, titanium, manganese, chromium, potassium and sodium content in steel slag by inductively coupled plasma atomic emission spectrometry
DB13/T 5590-2022 Determination of phosphorus, titanium, manganese, zinc, potassium and sodium in iron-containing dust and sludge - Inductively coupled plasma atomic emission spectrometry

Guangxi Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB45/T 2110-2019 Determination of Phosphorus and Sulfur in Plants by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB45/T 1246-2015 Determination of Manganese, Iron and Lead in Gasoline by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB45/T 1341-2016 Determination of Sulfur Trioxide Content in Cement by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB45/T 1342-2016 Determination of total sulfur, total phosphorus and total potassium in soil by inductively coupled plasma atomic emission spectrometry
DB45/T 1547-2017 Determination of zirconium in fireworks and firecrackers by inductively coupled plasma emission spectrometry
DB45/T 2106-2019 Determination of Potassium, Sodium, Calcium and Magnesium in Nonfood Plants by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB45/T 2108-2019 Determination of Gallium Content in Target Materials for Copper Indium Gallium Selenium Solar Photovoltaic Cells by Inductively Coupled Plasma Atomic Emission Spectrometry

Henan Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB41/T 1189-2016 Analysis of Chemical Composition of Polymetallic Minerals by Inductively Coupled Plasma-Atomic Emission Spectrometry

Guangdong Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB44/T 1935-2016 Determination of Trace Elements in Hair by Inductively Coupled Plasma-Atomic Emission Spectrometry

国家能源局, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SY/T 6404-2018 Inductively coupled plasma atomic emission spectrometry and mass spectrometry analysis methods of metal elements in rocks
SH/T 0923-2016 Determination of elemental content in insulating oil by inductively coupled plasma atomic emission spectrometry

Professional Standard - Energy, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

NB/SH/T 0923-2016 Determination of element content in insulating oil by inductively coupled plasma atomic emission spectrometry
NB/T 11245-2023 Determination of Trace Elements in Solid Biomass Fuels by Inductively Coupled Plasma-Atomic Emission Spectrometry
NB/SH/T 0892-2015 Standard test method for determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry (ICP-AES)
NB/SH/T 6046-2021 Determination of boron content in brake fluid by inductively coupled plasma emission spectrometry

GOSTR, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

GOST 34242-2017 Petroleum and petroleum products. Determination nickel, vanadium and iron by methods atomic emission spectrometry with inductively coupled plasma

Guizhou Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB52/T 1073-2015 Determination of Phosphorus in Phosphoric Acid by Inductively Coupled Plasma Emission Spectrometry

Jilin Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB22/T 2463-2016 Determination of cadmium, lead and chromium in feed by inductively coupled plasma spectrometry
DB22/T 265-2020 Determination of Silicon and Phosphorus in Ferrochrome - Acid-soluble and Alkali-fusion-Inductively Coupled Plasma Atomic Emission Spectrometry
DB22/T 1688-2012 Determination of Arsenic, Cadmium, Lead and Chromium in Fertilizers by Inductively Coupled Plasma Spectrometry
DB22/T 1993-2013 Determination of Lead and Cadmium Dissolution in Ceramic Tableware by Inductively Coupled Plasma Spectrometry

Professional Standard - Petroleum, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SY/T 6404-1999 Analytical method of metal elements in sediment rock by ICP-AES

Gansu Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB62/T 2760-2017 Determination of multi-element content in cryolite by inductively coupled plasma atomic emission spectrometry
DB62/T 2763-2017 Determination of multielement content in aluminum fluoride by inductively coupled plasma atomic emission spectrometry

Professional Standard - Water Conservancy, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SL 394.1-2007 Determination of 34 elements(Pb,Cd,V,P etc.).Inductively coupled plasma atomic emission spectroscopy (ICP-AES)

Professional Standard - Aviation, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

HB 6731.11-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of copper,magnesium,zink,cadmium,iron,manganese,boron,titanium, zirconium,nickel,chrome content by inductivel coupled plasma atomic spectrometric method
HB 6731.12-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of silicon content by inductivel coupled plasma atomic spectrometric method
HB 7716.17-2022 Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry
HB 7716.18-2022 Spectrometric analysis of titanium alloys – Part 18：Determination of lithium, lead content –Inductively coupled plasma atomic emission spectrometric method
HB 7716.16-2022 Spectrometric analysis of titanium alloys – Part 16：Determination of platinum, palladium content –Inductively coupled plasma atomic emission spectrometric method
HB 7716.14-2002 Spectrometric analysis of titanium alloys Part 14:Determination of yttrium content-Inductively coupled plasma atomic emission spectrometric method
HB 7716.15-2022 Spectrometric analysis of titanium alloys – Part 15：Determination of tungsten, niobium, tantalum, nickel content –Inductively coupled plasma atomic emission spectrometric method

国家质量监督检验检疫总局, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SN/T 4377-2015 Determination of impurity elements in copper and copper alloy scraps by inductively coupled plasma atomic emission spectrometry
SN/T 4682-2016 Determination of cobalt, iron, nickel, manganese and copper content in cobalt concentrate by inductively coupled plasma atomic emission spectrometry

Jiangxi Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB36/T 1632-2022 Determination of Soil Available Boron by Inductively Coupled Plasma Emission Spectrometry

Shanxi Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB14/T 915-2014 Determination of Copper and Zinc in Soil by Inductively Coupled Plasma Emission Spectrometry
DB14/T 914-2014 Determination of Lead and Chromium in Soil by Inductively Coupled Plasma Emission Spectrometry

ES-UNE, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

UNE-EN 10361:2016 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method
UNE-EN ISO 3815-2:2005 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005) (Endorsed by AENOR in October of 2005.)
UNE-EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis (Endorsed by Asociación Española de Normalización in April of 2023.)

Professional Standard - Building Materials, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

JC/T 2027-2010 Determination of impurities in high purity quartz.Inductively coupled plasma atomic emission spectrometry
JC/T 2133-2012 Determination of impurities in silica sol for polishing solution in semiconductor industry.Inductively coupled plasma atomic emission spectrometric method

PT-IPQ, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

NP ISO 10478:2001 Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods

Taiwan Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

CNS 13875-1997 Method of test for aluminum and silicon in fuel oils by ashing,fusion,inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry

Qinghai Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB63/T 1824-2020 Determination of Available Sulfur in Soil by Inductively Coupled Plasma Emission Spectrometry
DB63/T 1822-2020 Determination of Available Phosphorus in Soil by Inductively Coupled Plasma Emission Spectrometry
DB63/T 1821-2020 Determination of magnetism in iron ore by inductively coupled plasma emission spectrometry
DB63/T 1848-2020 Determination of potassium, sodium, calcium and magnesium in brine by inductively coupled plasma emission spectrometry

Professional Standard - Coal, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

MT/T 1014-2006 Determination of major and miner elements in coal ash by Inductively Coupled Plasma.Atomic emission spectrometry

Professional Standard-Ships, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

CB 20042-2012 Methods for Iron alloy of copper.Determination of micro zirconium content.Inductively coupled plasma-atomic emission spectromertric method

Professional Standard - Nuclear Industry, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

EJ/T 1106-2016 Determination of tantalum, thorium and hafnium in uranium dioxide powders and pellets by inductively coupled plasma atomic emission spectrometry
EJ/T 20170-2018 Determination of 20 trace impurity elements in metallic uranium by inductively coupled plasma atomic emission spectrometry

Indonesia Standards, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

SNI ASTM D7303:2011 Standard test methode for determination of metals in lubricating greases by Inductively Coupled Plasma Atomic Emission Spectrometry

Inner Mongolia Provincial Standard of the People's Republic of China, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

DB15/T 1243-2017 Determination of Impurity Content in Resins by Inductively Coupled Plasma Emission Spectrometry

PL-PKN, Inductively Coupled Argon Plasma Spectroscopy and Atomic Absorption Spectroscopy

PN-EN 16317+A1-2017-04 P Fertilizers and liming materials--Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution