ZH
RU
ES

carbon sulfur meter combustion

carbon sulfur meter combustion, Total:498 items.

In the international standard classification, carbon sulfur meter combustion involves: Fuels, Coals, Materials for the reinforcement of composites, Metalliferous minerals, Petroleum products in general, Ferroalloys, Analytical chemistry, Air quality, Domestic, commercial and industrial heating appliances, Protection against fire, Products of the chemical industry, Ferrous metals, Non-ferrous metals, Cutting tools, Road engineering, Rubber, Nuclear energy engineering, Soil quality. Pedology, Burners. Boilers, Textile machinery, Coatings and related processes used in aerospace industry, Petroleum, petroleum products and natural gas handling equipment, Organic chemicals, Non-metalliferous minerals, Water quality, Natural gas, Powder metallurgy, Wastes, Refractories, Iron and steel products, Diagnostic, maintenance and test equipment, MINING AND MINERALS, Electrical accessories, Crude petroleum, Testing of metals, Raw materials for rubber and plastics, Inorganic chemicals, Cycles, Welding, brazing and soldering, Lubricants, industrial oils and related products, Plastics, Farming and forestry, Vocabularies.

American Society for Testing and Materials (ASTM), carbon sulfur meter combustion

ASTM UOP586-71 Sulfur in Hydrocarbons by Oxy - Hydrogen Combustion
ASTM UOP987-11 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM UOP606-78 Chloride in Hydrocarbons by Oxy-Hydrogen Combustion
ASTM UOP989-14 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM UOP703-98 Carbon on Catalysts by Induction Furnace Combustion and Infrared Detection
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM UOP619-83 Fluorine in Hydrocarbons by Oxy-Hydrogen Combustion
ASTM D1072-06 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM UOP864-12 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
ASTM G144-01 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM UOP988-11 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM D1072-23 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM C816-85(2005) Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
ASTM D7573-09 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM G144-96 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01(2014) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01(2022) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM E1019-08 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM C816-85(1998)e1 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
ASTM D1072-90(1999) Standard Test Method for Total Sulfur in Fuel Gases
ASTM D1072-06(2017) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D5016-16 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM D7166-23 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM D6522-20 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Proce
ASTM D1072-06(2012) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM UOP864-89 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
ASTM C816-85(2010)e1 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
ASTM D6316-00 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D6316-09b Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D2382-83 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
ASTM D2382-76 Standard Test Method for Heat Of Combustion Of Hydrocarbon Fuels By Bomb Calorimeter (High-Precision Method)
ASTM D2382-88 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
ASTM E1019-11 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM D7166-05 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM D7652-11 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection

Korean Agency for Technology and Standards (KATS), carbon sulfur meter combustion

KS E ISO 609-2003(2018) Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
KS E ISO 9686-2011(2016) Direct reduced iron－Determination of carbon and/or sulfur－High-frequency combustion method with infrared measurement
KS E ISO 9686-2011(2021) Direct reduced iron－Determination of carbon and/or sulfur－High-frequency combustion method with infrared measurement
KS M ISO 4260-2003(2018)
KS E ISO 9686:2011 Direct reduced iron－Determination of carbon and/or sulfur－High-frequency combustion method with infrared measurement
KS D ISO 15350-2003(2018) Steel and iron－Determination of total carbone and sulfur content－Infrared absorption method after combustion in an induction furnace(routine method)
KS E ISO 4690:2002 Iron ores－Determination of sulfur content－Combustion method
KS E ISO 4690:2007 Iron ores-Determination of sulfur content-Combustion method
KS I ISO 15178-2009(2019) Soil quality－Determination of total sulfur by dry combustion
KS E ISO 351-2003(2013) Solid mineral fuels－Determination of total sulfur－High temperature combustion method
KS E ISO 351:2003 Solid mineral fuels－Determination of total sulfur－High temperature combustion method
KS M ISO 5931:2003 Carbonaceous materials used in the production of aluminium－Calcined coke and calcined carbon products－Determination of total sulfur by the Eschka method
KS E 7002-2005 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS E 7002-1973 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS D ISO 15350:2003 Steel and iron－Determination of total carbone and sulfur content－Infrared absorption method after combustion in an induction furnace(routine method)
KS E ISO 609:2003 Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
KS I ISO 15178:2009 Soil quality-Determination of total sulfur by dry combustion
KS D ISO 671:2002 Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS E ISO 4689-2:2006 Iron ores-Determination of sulfur content-Part 2:Combustion/titration method
KS D ISO 671-2002(2017) Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS E ISO 4689-2:2017 Iron ores－Determination of sulfur content－Part 2：Combustion/titration method
KS D ISO 671-2002(2022) Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS M ISO 5931-2003(2018)
KS E 7002-2002 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS I ISO 10694:2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS I ISO 10694-2005(2015) Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS E ISO 320-2012(2022) Manganese ores－Determination of sulphur content－Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS E ISO 320-2012(2017) Manganese ores－Determination of sulphur content－Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS D ISO 7266:2002 Copper and copper alloys-Determination of sulfur content-Combustion titrimetric method
KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
KS E ISO 4689-3:2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method
KS D ISO 7266-2002(2022) Copper and copper alloys－Determination of sulfur content－Combustion titrimetric method
KS E ISO 320:2012 Manganese ores-Determination of sulphur content-Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS M ISO 6528-3:2006 Rubber-Determination of total sulfur content-Part 3:Furnace combustion method
KS E ISO 4689-2:2022 Iron ores ― Determination of sulfur content ― Part 2: Combustion/titration method
KS M ISO 6528-3-2006(2011) Rubber－Determination of total sulfur content－Part 3：Furnace combustion method
KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS M ISO 6528-3:2016 Rubber－Determination of total sulfur content－Part 3：Furnace combustion method
KS D ISO 437:2001 Steel and cast iron－Determination of total carbon content－Combustion gravimetric method
KS D ISO 4830-4:2005 Steel-Determination of low carbon contents-Part 4:Coulometric method after combustion
KS D ISO 437:2021 Steel and cast iron — Determination of total carbon content —Combustion gravimetric method
KS D ISO 4830-4-2005(2010) Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS D ISO 4830-4:2013 Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS E ISO 625-2003(2018) Solid mineral fuels－Determination of carbon and hydrogen sulfur－Liebig method
KS M ISO 6528-1:2006 Rubber-Determination of total sulfur content-Part 1:Oxygen combustion flask method
KS I ISO 6326-5-2006(2016) Natural gas－Determination of sulfur compounds－Part 5：Lingener combustion method
KS E 3733-2014 Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS D ISO 437-2001(2016) Steel and cast iron－Determination of total carbon content－Combustion gravimetric method
KS E 3733-2014(2019) Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS D ISO 4935:2002 Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS I ISO 6326-5:2006 Natural gas－Determination of sulfur compounds－Part 5：Lingener combustion method
KS D ISO 7266-2002(2017) Copper and copper alloys－Determination of sulfur content－Combustion titrimetric method
KS D ISO 4935-2002(2022) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 4935-2002(2017) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS I ISO 6326-5-2006(2021) Natural gas－Determination of sulfur compounds－Part 5：Lingener combustion method
KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
KS D ISO 9556:2001 Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
KS D ISO 13902:2002 Steel and iron－Determination of high sulfur content－Infrared absorption method after combustion in an induction furnace

煤炭工业部, carbon sulfur meter combustion

MT 227-1990 Technical conditions of high-temperature combustion measuring instrument for total sulfur in coal

KR-KS, carbon sulfur meter combustion

KS E ISO 609-2003(2023) Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
KS M ISO 4260-2003(2023)
KS D ISO 15350-2003(2023) Steel and iron－Determination of total carbone and sulfur content－Infrared absorption method after combustion in an induction furnace(routine method)
KS E ISO 4690-2002 Iron ores－Determination of sulfur content－Combustion method
KS M ISO 5931-2003(2023)
KS I ISO 10694-2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS E ISO 4689-2-2022 Iron ores ― Determination of sulfur content ― Part 2: Combustion/titration method
KS E ISO 4689-3-2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method
KS E ISO 4689-2-2017 Iron ores－Determination of sulfur content－Part 2：Combustion/titration method
KS M ISO 6528-1-2016 Rubber－Determination of total sulfur content－Part 1：Oxygen combustion flask method
KS D ISO 437-2021 Steel and cast iron — Determination of total carbon content —Combustion gravimetric method
KS E ISO 625-2003(2023) Solid mineral fuels－Determination of carbon and hydrogen sulfur－Liebig method
KS I ISO 6326-5-2022 Natural gas Determination of sulfur compounds Part 5: Lingener combustion method
KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace

Professional Standard - Coal, carbon sulfur meter combustion

MT/T 227-2005 General specifications for determinator of sulfur by high temperature combustion neutralization method

Group Standards of the People's Republic of China, carbon sulfur meter combustion

T/CMES 08006-2020 Determination of Sulfur Content in Carburizers High Frequency Combustion Infrared Absorption Method
T/CMES 08005-2020 Determination of Carbon and Sulfur Content in Ferrochromium Nitride High Frequency Combustion Infrared Absorption Method
T/QAS 081.1-2023 Chemical Analysis of Polymetallic Minerals Part 1: Determination of Carbon and Sulfur by High Frequency Combustion Infrared Absorption Method
T/QAS 065-2021 Combustion Oxidation Method for Determination of Total Organic Carbon in Brine
T/CIECCPA 006-2022 Calculation unit for the carbon reduction of boiler combustion intelligent optimization system
T/CASME 148-2022 Technical requirements for combustion decarbonization treatment of industrial solid wastes
T/CWAN 0029.2-2021 Chemical analysis methods of nickel-based welding materials Part 2: Determination of carbon and sulfur content by infrared absorption method of high-frequency induction furnace combustion

National Metrological Verification Regulations of the People's Republic of China, carbon sulfur meter combustion

JJG 395-2016 Carbon-sulfur Analyzers
JJG 395-1997 Verification Regulation of Carbon-Sulfur Analyzer
JJG(交通) 072-2006 Testing apparatus for asphalt content by burning method
JJG(轻工) 95-1992 Verification Regulations for FL-45C Combustion Instrument
JJG 940-1998 Verification Regulation of Catalysis Combustion Type Hydrogen Test Device
JJG(交通) 127-2015 Vehicle Fuel Consumption Instrument Based on Carbon Balance Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon sulfur meter combustion

GB/T 6730.61-2005 Iron ores-Determination of carbon and sulfur content-High frequency combustion with infrared absorption method
GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
GB/T 29652-2013 Direct reduced iron.Determination of carbon and sulfur.High frequency combustion with infrared absorption method
GB/T 31292-2014 Carbon fibre.Determination of carbon content.Combustion absorption method
GB/T 4497-1984 Vulcanized rubber--Determination of total sulphur content--Oxygen combustion flask method
GB/T 2462-1996 Pyrites and concentrate--Determination of effective sulfur content--Combustion neutralization method
GB/T 24224-2009 Chromium ores.Determination of sulfur content.Combustion-neutralization titration method,combustion-potassium iodate titration method and combustion-infrared absorption method
GB/T 20123-2006 Steel and iron - Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 2469-1996 Pyrites and concentrate--Determination of carbon content--Caustic asbestos gravimetric method
GB/T 4325.21-2013 Methods for chemical analysis of molybdenum.Part 21:Determination of carbon content and sulfur content.High frequency combustion-infrared absorption method
GB/T 6730.17-2014 Iron ores.Determination of sulfur content.Combustion iodometric method
GB/T 1829-1979 Determination of sulfur content in tin concentrates--Direct combustion-iodometric method
GB/T 5195.5-2006 Fluorspar. Determination of total sulfur content. The iodometric method after combustion
GB/T 4324.23-1984 Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of sulphur content
GB/T 11848.10-1999 Determination of sulfur in uranium ore concentrate by combustion-iodometric titrimetry
GB/T 4325.23-1984 Methods for chemical analysis of molybdenum--The combustion-conductometric titration method for the determination of sulphur content
GB/T 11067.5-1989 Silver--Determination of carbon content--Combustion-conductometric method
GB 11067.5-1989 Silver—Determination of carbon content—combustion-conductometric method
GB/T 13245-1991 Refractories containing carbon--Determination of the total carbon--Combustion gravimetric method
GB/T 3654.6-1983 Methods for chemical analysis of ferroniobium--The combustion iodate volumetric method for the determination of sulfur content
GB/T 4324.23-2012 Methods for chemical analysis of tungsten.Part 23:Determination of sulfur content.The combustion-conductometric titration and high frequency combustion-infrared absorption method
GB/T 3654.4-1983 Methods for chemical analysis of ferroniobium--The combustion gravimetric method for the determination of carbon content
GB 3654.4-1983 Ferro-Niobium Chemical Analysis Method Determination of Carbon by Combustion Gravimetry
GB/T 22472-2008 Tests for flammability of plastic materials for parts in devices and appliances
GB/T 223.74-1991 Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gasometric method for the determination of non-combined carbon content
GB/T 6730.17-1986 Methods for chemical analysis of iron ores--The combustion iodometric method for the determination of sulfur content
GB/T 4497.1-2010 Rubber.Determination of total sulfur content.Part 1:Oxygen combustion flask method
GB/T 4325.27-1984 Methods for chemical analysis of molybdenum--The combustion-coulometric titration method for the determination of carbon content
GB/T 4324.27-1984 Methods for chemical analysis of tungsten--The combustion-coulometric titration method for the determination of carbon content
GB/T 3257.18-1999 Methods for chemical analysis of bauxite--Determination of sulfur content--Direct combustion-iodometric method
GB/T 8705.4-1988 Methods for chemical analysis of ferrophosphorus--The combustion-neutralization titration method for the determination of carbon content
GB/T 11067.6-1989 Silver--Determination of sulfur content--Combustion potassium iodate titrimetric method
GB 11067.6-1989 Silver—Determination of sulphur content—Combustion-potassium iodate titrimetric method
GB/T 4701.11-1988 Methods for chemical analysis of ferrotitanium--The combustion-neutralization titration method for the determination of sulfur content
GB/T 5059.10-1988 Methods for chemical analysis of ferromolybdenum--The combustion-potassium iodate titration method for the determination of sulfur content
GB/T 7731.13-1988 Methods for chemical analysis of ferrotungsten--The combustion-neutralization titration method for the determination of sulfur content
GB/T 5687.9-1988 Methods for chemical analysis of ferro-chromium--The combustion-neutralization titration method for the determination of sulfur content
GB/T 8151.2-1987 Methods for chemical analysis of zinc concentrates--The combustion-neutralization titrimetric method for the determination of sulfur content
GB/T 8654.11-1988 Methods for chemical analysis of manganese metal--The combustion-neutralization titration method for the determination of sulfur content
GB/T 14506.13-1993 Sillicate rocks. Determination of sulfur content. Combustion iodometric method
GB/T 4702.17-1988 Methods for chemical analysis of chromium metal--The combustion-neutralization titration method for the determination of sulfur content
GB/T 5059.9-2008 Ferromolybdenum.Determination of sulfur content.The infrared absorption method and the combustion-iodate volumetric method
GB/T 12700-1990 Petroleum products and hydrocarbons--Determination of sulfur content--Wickbold combustion method
GB 4702.17-1988 Methods for chemical analysis of chromium metal－The combustion-neutralization titration method for the determination of sulfur content
GB/T 223.71-1991 Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric method for the determination of carbon content
GB/T 11060.7-2011 Natural gas.Determination of sulfur compounds.Part 7: Determination of total sulfur content by Lingener combustion method
GB/T 15057.8-1994 Limestone for chemical industry- Determination of sulfur content- Gravimetric and combustion-iodate titrimetric methods
GB/T 4102.5-1983 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-iodimetric method for the determination of sulfur content
GB/T 5195.5-1985 Methods for chemical analysis of fluor-spar--The combustion-potassium iodate volumetric method for the determination of total sulphur content
GB/T 5686.8-1988 Methods for chemical analysis of silicomanganese alloy--The combustion-neutralization titration method for the determination of sulfur content
GB/T 4699.7-1988 Methods for chemical analysis of silicochromium--The combustion-neutralization titration method for the determination of sulfur content
GB 4699.7-1988 Methods for chemical analysis of silicochromium－The combustion-neutralization titration method for the determination of sulfur content
GB/T 4102.4-1983 Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-coulometric method for the determination of total carbon content
GB/T 32573-2016 Determination of total carbon content of silicon powder Infrared absorption method after combustion in induction furnace
GB/T 3286.7-2014 Methods for chemical analysis of limestone and dolomite.Part 7:The determination of sulphur content. The pipe furnace combustion iodic acid potassium titration method,the high frequency combustion with infrared absorption method and the barium sulfate gra

Danish Standards Foundation, carbon sulfur meter combustion

DS/EN 24260:1995 Petroleum products and hydrocarbons - Determination of sulfur contents - Wickbold combustion method
DS/ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
DS/ISO 351+Cor.1:1996 Solid mineral fuels - Determination of total sulfur - High temperature combustion method
DS/EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
DS/EN ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
DS/ISO 6528/1:1984 Rubber. Determination of total sulfur content. Part 1: Oxygen combustion flask method
DS/EN ISO 6326-5:1998 Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method
DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace

Association Francaise de Normalisation, carbon sulfur meter combustion

NF EN 24260:1994 Produits pétroliers et hydrocarbures - Dosage du soufre - Méthode de combustion Wickbold.
NF M07-025:1986 Combustibles liquides - Dosage du soufre - Méthode par combustion à haute température
NF ISO 4690:1987 Minerais de fer - Dosage du soufre - Méthode par combustion.
NF A06-558*NF EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method).
NF A20-407*NF ISO 4690:1987 Iron ores. Determination of sulphur content. Combustion method.
NF ISO 15178:2001 Qualité du sol - Dosage du soufre total par combustion sèche
NF X34-220:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
NF U42-887*NF ISO 22887:2021 Determination of total sulfur in fertilizers by high temperature combustion
NF ISO 22887:2021 Dosage du soufre total dans les engrais par combustion à haute température
NF EN 54-30:2015 Système de détection et d'alarme incendie - Partie 30 : détecteurs d'incendie ponctuels utilisant une combinaison de capteurs de monoxyde de carbone et de température
NF EN ISO 21663:2020 Combustibles solides de récupération - Méthodes de détermination de la teneur en carbone (C), hydrogène (H), azote (N) et soufre (S) par la méthode instrumentale
NF M07-022:1982 LIQUID FUELS. PETROLEUM AND DERIVATIVES. DETERMINATION OF MERCAPTAN SULPHUR IN VOLATILE FUELS AND DISTILLATES.
NF A10-711:1970 Chemical analysis of ferro-molybdenum. Determination of sulphur (combustion method).
NF A06-105:1970 Chemical analysis of manganese ores. Determination of sulphur. Combustion method.
NF ISO 7266:1986 Cuivre et alliages de cuivre - Dosage du soufre - Méthode titrimétrique après combustion
NF A06-304:1961 Chemical analysis of steel and cast iron. Determination of sulphur after combustion.
NF A06-719*NF ISO 7266:1986 Copper and copper alloys. Determination of sulfur content. Combustion titrimetric method.
NF X31-429*NF ISO 15178:2001 Soil quality - Determination of total sulfur by dry combustion.
NF X20-526-5:1998 Natural gas. Determination of sulfur compounds. Part 5 : Lingener combustion method.
DTU P52-221*DTU 65.4:1969 DTU 65-4. Technical requirements for gas and liquefied hydrocarbon fired boilerhouses.
NF M03-032:1999 Coal and coke. Determination of carbon and hydrogen content by high temperature combustion
NF X31-409*NF ISO 10694:1995 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
NF ISO 27919-1:2019 Captage du dioxyde de carbone - Partie 1 : méthodes d'évaluation des performances pour le captage du CO2 post-combustion intégré à une centrale électrique
NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
NF A06-367*NF EN 24935:1992 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace.

British Standards Institution (BSI), carbon sulfur meter combustion

PD ISO/TR 9686:2017 Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
BS PD ISO/TR 9686:2017 Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
BS ISO 9686:2006 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
BS 7967-2:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances - Guide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance
BS 7967-5:2010 Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances.Part 5: Guide for using electronic portable combustion gas analysers in non-domestic premises for the measurement of carbon monoxide and carbon dioxid
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
BS ISO 22887:2020 Determination of total sulfur in fertilizers by high temperature combustion
BS 7967-3:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances - Guide for responding to measurements obtained from electronic portable combustion gas analysers
BS EN ISO 15350:2001 Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
BS EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
BS EN ISO 21663:2020 Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
BS ISO 4689-2:2015 Iron ores. Determination of sulfur content. Combustion/titration method
BS ISO 4689-2:2004 Iron ores - Determination of sulfur content - Combustion/titration method
BS ISO 4689-2:2017 Iron ores. Determination of sulfur content. Combustion/titration method
20/30368231 DC BS ISO 22887. Determination of total sulphur in fertilizers by high temperature combustion
20/30366878 DC BS EN ISO 21663. Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
BS EN ISO 6326-5:1998 Natural gas. Determination of sulfur compounds. Lingener combustion method
BS EN ISO 6326-5:1994 Natural gas - Determination of sulfur compounds - Lingener combustion method
BS 7020-7.2:1989 Analysis of iron ores. Methods for the determination of sulphur content. Combustion method
BS 7020-7.2:1988 Analysis of iron ores. Methods for the determination of sulphur content. Combustion method
BS 7967-1:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances - Guide for identifying and managing sources of fumes, smells, spillage/leakage of combustion products and carbon monoxide detector activation
BS EN 24260:1994 Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
BS 7755-3.8:1995 Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
BS 7967-4:2007 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances – Part 4: Guide for using electronic portable combustion gas analysers as part of the process of servicing and maintenance of gas-fired appliances
14/30282364 DC BS ISO 437. Steel and cast iron. Determination of total carbon content. Combustion gravimetric method
BS 2000-61:1999 Methods of test for petroleum and its products - Determination of sulfur - High pressure combustion method
BS 7164-23.1:1993 Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content. Oxygen combustion flask method
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS EN ISO 7526:2020 Tracked Changes. Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
BS ISO 13093:2023 Titanium and titanium alloys. Determination of carbon. Infrared absorption method after combustion in an induction furnace

Sichuan Provincial Standard of the People's Republic of China, carbon sulfur meter combustion

DB51/T 2042-2015 Determination of Carbon and Sulfur Content in Vanadium Aluminum Alloys High Frequency Induction Combustion-Infrared Absorption Method

工业和信息化部, carbon sulfur meter combustion

YB/T 4908.5-2021 Determination of carbon and sulfur content in vanadium-aluminum alloys High-frequency induction combustion-infrared absorption method
HG/T 5594-2019 Determination of carbon and sulfur in petroleum refining catalysts by high frequency combustion infrared absorption method
YS/T 1563.5-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 5: Determination of carbon and sulfur content High-frequency combustion infrared absorption method
YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method

American National Standards Institute （ANSI), carbon sulfur meter combustion

ANSI/NFPA 665-2011 Standard for Prevention of Sulfur Fires and Explosions
ANSI/ASTM C816:2005 Test Method for Sulfur in Graphite by Combustion-iodometric Titration Method

International Organization for Standardization (ISO), carbon sulfur meter combustion

ISO/TR 9686:2017 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
ISO 9686:2006 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
ISO 9686:1992 Direct reduced iron; determination of carbon and/or sulfur content; high frequency combustion method with infrared measurement
ISO 4690:1986 Iron ores; Determination of sulfur content; Combustion method
ISO 351:1975 Coal and coke — Determination of total sulphur — High temperature combustion method
ISO 351:1996 Solid mineral fuels - Determination of total sulfur - High temperature combustion method
ISO 22887:2020 Determination of total sulfur in fertilizers by high temperature combustion
ISO 5931:2000 Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method
ISO/CD 609:1976 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method
ISO 351:1984 Solid mineral fuels; Determination of total sulfur; High temperature combustion method
ISO 15350:2000 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
ISO 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO 15178:2000 Soil quality - Determination of total sulfur by dry combustion
ISO 671:1982 Steel and cast iron; Determination of sulphur content; Combustion titrimetric method
ISO 320:1975 Title missing - Legacy paper document
ISO 320:1981 Manganese ores; Determination of sulphur content; Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
ISO 7266:1984 Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method
ISO 351:1996/Cor 1:1996 Solid mineral fuels - Determination of total sulfur - High temperature combustion method; Technical corrigendum 1
ISO 609:1975 Coal and coke; Determination of carbon and hydrogen; High temperature combustion method
ISO 437:1982 Steel and cast iron; Determination of total carbon content; Combustion gravimetric method
ISO 4689-2:2004 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO 4689-2:2015 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO 6528-3:1988 Rubber; determination of total sulfur content; part 3: furnace combustion method
ISO 6528-1:1992 Rubber; determination of total sulfur content; part 1: oxygen combustion flask method
ISO 6528-1:1984 Rubber — Determination of total sulphur content — Part 1: Oxygen combustion flask method
ISO/TR 4830-2:1978 Steel — Determination of low carbon contents — Part 2: Titrimetric method after combustion
ISO/TR 4830-4:1978 Steel; Determination of low carbon contents; Part IV : Coulometric method after combustion
ISO 609:1996/Cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-2:2017 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 9501:1991 Metallurgical-grade fluorspar; determination of total sulfur content; iodometric method after combustion
ISO 6326-5:1989 Natural gas; determination of sulfur compounds; part 5: Lingener combustion method
ISO/TR 4830-3:1978 Steel — Determination of low carbon contents — Part 3: Conductimetric measurement after combustion
ISO/TR 4830-1:1978 Steel — Determination of low carbon contents — Part 1: Manometric (low-pressure) method after combustion
ISO/PRF 13093:1972 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace
ISO 13093:2023 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace
ISO 4935:1990 Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace
ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion

Lithuanian Standards Office , carbon sulfur meter combustion

LST EN 24260-1999 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987)
LST EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
LST EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)

SE-SIS, carbon sulfur meter combustion

SIS SS 18 71 77-1991 Solid fuels — Determination of total sulfur using a high temperature tube furnace combustion method
SIS SS 18 71 68-1986 Coal and coke - Determination of carbon and hydrogen - High temperature combustion method
SIS SS-EN 24 935-1992 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace

BE-NBN, carbon sulfur meter combustion

NBN-EN 24260-1994
NBN T 95-202-1981 Determination of the sulphur trioxide and of the sulphur dioxide con-tent of combustion gases
NBN T 52-050-1988
NBN T 52-053-1977 Determination of the sulphur content of petroleum products by the Wiokbold combustion method

RO-ASRO, carbon sulfur meter combustion

SR ISO 4260:1996 Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
SR ISO 351:1994 Solid mineral fuels Determination of total sulphur. High temperature combustion method
SR ISO 320:1995 Manganese ores - Determination of sulphur content - Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combusteon
STAS SR 13303-6-1996 Chlorous mud-Determination of sulphur content-Barium sulphate gravimetric and sulphur dioxide titrimetric method after combustion

CZ-CSN, carbon sulfur meter combustion

CSN 44 1734-1989 Molybdenum concentrates. Determination of sulphur
CSN ISO 4690:1993 Iron ores. Determination of sulfur content. Combustion method
CSN 42 0680 Cast.10-1971 Chemical analysis of pure tin. Determination of sulphur by combustion method
CSN 42 0643 Cast.10-1972 Chemical analysis of alloyed nickel. Determination of sulphur by combustion method
CSN ISO 7266:1992 Copper and copper alloys - Determination of sulfur content - Combustion titrimetric method
CSN 44 1630-1989 Lead - zinc ores. Determination of sulphur
CSN 44 1355-1993 Solid minerál fuels. Unburnt residue. Determination of Hydrogen and Carbon
CSN ISO 9501:1992 Metallurgical-grade fluorspar - Determination of total sulfur content - Iodometric method after combustion
CSN 65 6079-1982 Petroleum and petroleum products. Determination of sulphur by combustion incalorimetric bomb
CSN 65 6077-1979 Dotermination of thc sulphur content >f petroleum proilurts by the Wickbold onibustion mothod

PL-PKN, carbon sulfur meter combustion

PN H04126-1993 Iron ores. Determination of sulfur content. Combustion method
PN C04759 ArkusZ05-1973 Gaseous fuels Conductometric method of test of carbon monoxide in burnt gas
PN-EN ISO 21663-2021-06 E Solid recovered fuels -- Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
PN C04088-1955 Petroleum products -- Determination of sulphur by combustion method in pipe furnace
PN G04514-16-1990 Solid fuels Determination of total sulphur and of sulphur in ash with the use of the LECO automatic analyser
PN C96011-05-1993 Natural gas. Determination of sulfur compounds. Part 5: Lingener combustion method
PN G04514-17-1993 Solid fuel. Determination of sulphur. Determination of sulphur by using automatic analysers
PN C04005-1988 Petroleum productsDetermination of sulfur and chlorine content in petroleum products by Wickbold combustion method

German Institute for Standardization, carbon sulfur meter combustion

DIN ISO 15178:2001-02 Soil quality - Determination of total sulfur by dry combustion (ISO 15178:2000)
DIN EN ISO 21663:2021-03 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020); German version EN ISO 21663:2020
DIN EN ISO 15350:2010-08 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000); German version EN ISO 15350:2010
DIN 51408-1:1983 Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method
DIN EN ISO 6326-5:1998 Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997
DIN 51400-3:2001 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 3: Combusting according to Schoeniger; Thorin-sulfonazo-III-titration
DIN 51400-2:2001 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 2: Combusting according to Grote-Krekeler; acidimetric titration; gravimetric determination
DIN ISO 10694:1996 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995)
DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
DIN 51400-4:2000 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 4: Combustion according to the Lingener method, visual titration, turbidmetric-titration
DIN CEN/TS 17776:2022-07 Organic and organo-mineral fertilizers - Determination of the total organic carbon (TOC) content by dry combustion; German version CEN/TS 17776:2022
DIN 51724-3:2012 Solid mineral fuels - Determination of sulfur content - Part 3: Instrumental methods

Professional Standard - Non-ferrous Metal, carbon sulfur meter combustion

YS/T 1605.12-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 12:Determination of carbon and sulfur contents — High frequency combustion infrared absorption method
YS/T 226.14-1994 Determination of carbon content in selenium (combustion conductometric method)
YS/T 239.3-1994 Antimony trisulfide chemical analysis method for determination of free sulfur by combustion iodometric method
YS/T 904.5-2013 Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
YS/T 281.16-1994 Cobalt - Determination of carbon content - Combustion-coulometric method
YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
YS/T 953.9-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 9:Determination of carbon and sulfur contents.Infrared absorption method after high frequency combustion
YS/T 575.17-2006 Methods of chemical analysis of bauxite ore Combustion-iodometric method for determination of sulfur content
YS/T 514.5-2006 Combustion-iodometric method for determination of sulfur content in high titanium slag and rutile chemical analysis method
YS/T 252.5-2007 Methods for chemical analysis of nickel matte.Determination of sulfur content.Combustion-neutralization titrimetric method
YS/T 240.7-2007 Methods for chemical analysis of bismuth concentrate.Determination of sulfur content.Combustion-neutralization titrimetric method
YS/T 239.2-2010 Methods for chemical analysis of antimony trisulfide- Part 2:Determination of combined sulfur content-Combustion-neutralization titration method
YS/T 239.3-2010 Methods for chemical analysis of antimony trisulfide- Part 3:Determination of free sulfur content-Burning and sodium hydroxide titration method
YS/T 514.4-2006 High titanium slag, rutile chemical analysis method Combustion-Coulometric method to determine carbon content

IN-BIS, carbon sulfur meter combustion

IS 6226 Pt.1-1971
IS 9683-1980
IS 13938 Pt.4-1994
IS 13840 Pt.1-1993 Chemical analysis of ferrotitanium. Part 1: Determination of carbon by the direct combustion gravimetric method
IS 12308 Pt.2-1987

Professional Standard - Machinery, carbon sulfur meter combustion

JB/T 10988-2010 Special products of silicon carbide-Reaction bonded silicon carbide-Desuphating nozzles
JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer
JB/T 7948.11-1999 Methods for chemical analysis of melted welding fluxes.The direct combustion-iodimetric method for determination of sulfur content
JB/T 7948.11-1995 Methods for chemical analysis of melted welding fluxes.The direct combustion-iodimetric method for determination of sulfur content
JB/T 7948.10-1999 Methods for chemical analysis of melted welding fluxes.The direct combustion-coulomb method for determination of total carbon content
JB/T 7948.10-1995 Methods for chemical analysis of melted welding fluxes.The direct combustion-coulomb method for determination of total carbon content

Professional Standard - Traffic, carbon sulfur meter combustion

JT/T 671-2006 Testing apparatus for asphalt content by burning method
JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method

SAE - SAE International, carbon sulfur meter combustion

SAE R-264-2001 Engine Combustion Instrumentation and Diagnostics

Professional Standard - Nuclear Industry, carbon sulfur meter combustion

EJ/T 20166-2018 Determination of carbon and sulfur in reprocessed uranium trioxide powder by high-frequency combustion infrared absorption method
EJ/T 1164-2002 Determination of sulfur content in uranium dioxide powder - Infrared absorption method after combustion in an induction furnace

ES-UNE, carbon sulfur meter combustion

UNE-EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)

AENOR, carbon sulfur meter combustion

UNE 32010:1995 SOLID MINERAL FUELS. DETERMINATION OF TOTAL SULPHUR. HIGH TEMPERATURE COMBUSTION METHOD.
UNE 32112:1995 SOLID MINERAL FUELS. DETERMINATON OF CARBON AND HYDROGEN. HIGH TEMPERATURE COMBUSTION METHOD.
UNE 36316-1:1982 DETERMINATION OF SULPHUR IN STEELS AND CASTING. VOLUMETRIC METHOD AFTER COMBUSTION
UNE-EN ISO 15350:2011 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)
UNE 77321:2003 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
UNE 51123:1986 STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER

Professional Standard - Military and Civilian Products, carbon sulfur meter combustion

WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations

National Metrological Technical Specifications of the People's Republic of China, carbon sulfur meter combustion

JJF(纺织) 068-2016 Calibration Specification for Vertical Combustion Tester
JJF(纺织)068-2018 Calibration Specification for Vertical Combustion Testers
JJF(纺织)068-2016 Calibration Specification for Vertical Combustion Tester
JJF(纺织) 068-2018 Calibration specification for vertical combustion tester
JJF(纺织) 087-2019 Calibration Specification for Textiles 45° Combustion Testers
JJF(纺织)087-2019 Calibration Specification for Textiles 45° Combustion Testers
JJF(纺织) 094-2020 Calibration Specification for Textiles Horizontal Burning Rate Testers
JJF(纺织)094-2020 Calibration Specification for Textiles Horizontal Burning Rate Testers

ZA-SANS, carbon sulfur meter combustion

SANS 5938:1980 Carbon and hydrogen contents of coal (high temperature combustion method)
SANS 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method

Professional Standard - Customs, carbon sulfur meter combustion

HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

VN-TCVN, carbon sulfur meter combustion

TCVN 255-2007 Solid mineral fuels.Determination of carbon and hydrogen.High temperature combustion method
TCVN 4916-2007 Solid mineral fuels.Determination of total sulfur.High temperature combustion method
TCVN 7371-2004 Soil quality.Determination of total sulfur by dry combustion
TCVN 4654-2-2009 Iron ores.Determination of sulphur content.Part 2: Combustion/titration method
TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
TCVN 6021-2008 Petroleum products and hydrocarbons.Determination of sulfur content.Wickbold combustion method

Professional Standard - Commodity Inspection, carbon sulfur meter combustion

SN/T 2413-2010 Determination of total carbon and sulfur contents of silicon metal for import and export-Infrared absorption spectromentry
SN/T 3321.2-2013 Limestone and dolomite.Part 2:Determination of carbon and sulfur content.High frequency combustion with infrared absorption method
SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method
SN/T 0481.5-1995 Methods for inspection of bauxite for export.Determination of sulfur content--Combustion-neutralizatic titration1995-09-06
SN/T 3469.3-2013 Determination of sulfur content in import copper matte and sintered copper material.High frequency combustion with infrared absorption method
SN/T 4363-2015 Determination of Sulfur Content in Copper Concentrates High Frequency Combustion Infrared Absorption Method
SN/T 4366-2015 Determination of Sulfur Content in Gold Ore High Frequency Combustion Infrared Absorption Method

IT-UNI, carbon sulfur meter combustion

UNI EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
UNI 6378-1968
UNI EN 41-1979
UNI 7771-1977 Chemical analysis of ferroalloys. Determination of carbon. Method by combustion in high frequency induction furnace.

YU-JUS, carbon sulfur meter combustion

JUS H.F8.506-1991 Natural gas. Determinatlon of sulfur content. t/ickbold combustion method
JUS C.A1.059-1986 Methods for chemical analysis of iron andsteel. Determination ofsulphurcontsnt Combustion titrime- tric method
JUS B.H8.316-1984 Methods of analysis of coal nad coke. Determination of total sulphur. High temperature combustion method

RU-GOST R, carbon sulfur meter combustion

GOST 2408.4-1998 Solid mineral fuels. Determination of carbon and hydrogen. High temperature combustion method
GOST 19121-1973 Petroleum products. Determination of sulphur content by lamp method
GOST 32599.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method
GOST R ISO 9686-2009 Direct reduced iron. Determination of carbon and/or sulfur content. Method of infrared spectroscopy after sample burning in induction furnace
GOST 28644-1990 Rubber. Determination of total sulphur content. Part 1. Oxygen combustion flask method
GOST 28645-1990 Rubber. Determination of total sulfur content. Part 3. Furnace combustion method
GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 34211-2017 Petroleum products. Determination of sulfur by high temperature combustion and detection by infrared (IR) radiation or thermal conductivity (TCD)
GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 1431-1985 Petroleum products and additives. Method for the determination of sulfur by fising in a crucible

Professional Standard - Urban Construction, carbon sulfur meter combustion

CJ/T 3075.2-1998 Laboratory of gas burning appliances.Test equipment and device

Professional Standard - Textile, carbon sulfur meter combustion

FZ/T 98017-2018 Textile vertical combustion performance tester

Society of Automotive Engineers (SAE), carbon sulfur meter combustion

SAE AMS2435F-2001 Coating, Tungsten Carbide-Cobalt Detonation Process
SAE AMS2435G-2007 Coating, Tungsten Carbide-Cobalt Coating, Detonation Process

Universal Oil Products Company (UOP), carbon sulfur meter combustion

UOP 987-2015 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
UOP 989-2014 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
UOP 703-2009 Carbon on Catalysts by Induction Furnace Combustion and Infrared Detection
UOP 864-2012 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
UOP 988-2011 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection

NL-NEN, carbon sulfur meter combustion

NEN 3276-1980 Petroleum products - Determination of sulfur content - Sch?niger combustion method
NEN 2481-1989 Combustion products of solid mineral fuels -Determination of the sulfur content in powder coal ash after combustion in a furnace -Titrimetric method

Taiwan Provincial Standard of the People's Republic of China, carbon sulfur meter combustion

CNS 10831-1984 Method for Determination of Uncombustible Sulfur in Coal Ash and Coke Ash
CNS 10827-1984 Method for Determination of Total Sulfur of Coal and Coke (High Temperature Combustion Method)
CNS 8288-1982 Method of Chemical Analysis for Sulphur in Metallic Silicon (Neutratization Titration by Combustion Method)
CNS 3514-1974 Method of Test for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
CNS 14705-2002 Method of test for heat release rate for building materials

European Committee for Standardization (CEN), carbon sulfur meter combustion

EN ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)
EN 41:1975 Determination of the sulphur content of petroleum products by the Wickbold combustion method
EN ISO 6326-5:1997 Natural Gas - Determination of Sulfur Compounds - Part 5: Lingener Combustion Method
EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)

HU-MSZT, carbon sulfur meter combustion

MSZ 11744-1970

Professional Standard - Ferrous Metallurgy, carbon sulfur meter combustion

YB/T 5342-2015 Ferrophosphorus.Determination of sulfur content.The combustion-neutralization titration method
YB/T 159.5-2015 Titanium concentrate (rock minerals).Determination of sulfur content.The combustion iodometric method
YB/T 5317-2016 Calcium silicon alloy.Determination of sulfur content.High frequency combustion with infrared absorption method and the combustion-potassium iodate titration method
YB/T 4419.1-2014 Metallized pellet by rotary hearth furnace.Determination of carbon and sulfur content.Infrared absorption method after combustion in an induction furnace
YB/T 5041-2012 Molybdenum oxide.Determination of sulfur content.Combustion-potassium iodate volumetric method
YB/T 5342-2006 Ferrophosphorus Chemical Analysis Method Combustion Neutralization Titration Determination of Sulfur Content
YB/T 5041-1993 Molybdenum Oxide Block Chemical Analysis Method Combustion-Potassium Iodate Volumetric Method for Determination of Sulfur
YB/T 1595-1999 Chemical analysis method of titanium concentrate (rock ore) Determination of sulfur content by combustion iodine method

CH-SNV, carbon sulfur meter combustion

SNV 742 401.2-1963
SN EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

AT-ON, carbon sulfur meter combustion

OENORM EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
ONORM L 1081-1999 Chemical analyses of soils - Determination of organic carbon by wet combustion
ONORM L 1080-1999 Chemical analyses of soils - Determination of organic carbon by dry combustion
ONORM C 1140-1960
ONORM EN 41-1983 Determination of the sulphur content of petroleum products by the Wickbold combustion method

Professional Standard - Environmental Protection, carbon sulfur meter combustion

HJ 658-2013 Soil.Determination of organic carbon.Combustion oxidation-titration method
HJ 695-2014 Soil.Determination of organic carbon.Combustion oxidation nondispersive infrared absorption method
HJ/T 71-2001 Water quality-Determination of total organic carbon-Nondispersive infrared absorption method
HJ 501-2009 Water quality.Determination of total organic carbon.Combustion oxidation nondispersive infrared absorption method

Military Standard of the People's Republic of China-General Armament Department, carbon sulfur meter combustion

GJB 10025-2021 Specification for carbon fiber needle punched fabrics for square combustion chambers

TR-TSE, carbon sulfur meter combustion

TS 440-1967 DETERMINATION OF TOTAL SULPHUR ?N COAL BY THE HIGH TEMPERATURE COMBUSTION METHOD
TS 652-1968 DETERMINATION OF CARBON AND HYDROGEN ?N COAL AND COKE BY THE HIGH TEMPERATURE COMBUSTION METHOD

BELST, carbon sulfur meter combustion

STB GOST R 8.667-2012 System for ensuring the uniformity of measurements of the Republic of Belarus. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)

Indonesia Standards, carbon sulfur meter combustion

SNI 13-4116-1996 Determination of total carbon hydrogen content of coal by high temperature combustion method

国家质量监督检验检疫总局, carbon sulfur meter combustion

SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal

Japanese Industrial Standards Committee (JISC), carbon sulfur meter combustion

JIS G 1211-1:2011 Iron and steel -- Determination of carbon content -- Part 1: Combustion gravimetric method
JIS K 6233-3:1998 Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method
JIS G 1211-3:2018 Iron and steel -- Determination of carbon -- Part 3: Infrared absorption method after combustion
JIS K 6233-1:1998 Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method
JIS G 1211-2:2011 Iron and steel -- Determination of carbon content -- Part 2: Gas volumetric method after combustion
JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion
JIS K 2541-1:2003 Crude oil and petroleum products -- Determination of sulfur content Part 1: Wickbold combustion method

Canadian Standards Association (CSA), carbon sulfur meter combustion

CSA Z223.2-M86-CAN/CSA-1986 Method for the Continuous Measurement of Oxygen, Carbon Dioxide, Carbon Monoxide, Sulphur Dioxide, and Oxides of Nitrogen in Enclosed Combustion Flue Gas Streams General Instruction No 1 R(1999)

Qinghai Provincial Standard of the People's Republic of China, carbon sulfur meter combustion

DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method

VE-FONDONORMA, carbon sulfur meter combustion

海关总署, carbon sulfur meter combustion

SN/T 5250-2020 Determination of sulfur content in mineral products by high-frequency combustion infrared absorption method
SN/T 5307-2021 Determination of fluorine, chlorine and sulfur in petroleum products by direct combustion-ion chromatography

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, carbon sulfur meter combustion

GB/T 5195.5-2017 Fluorspar—Determination of total sulfur content—Pipe furnace combustion iodic acid potassium titration method

未注明发布机构, carbon sulfur meter combustion

BS EN ISO 6326-5:1998(1999)*BS 3156-11.4.5:1994 Natural gas — Determination of sulfur compounds — Part 5 : Lingener combustion method
BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace

Henan Provincial Standard of the People's Republic of China, carbon sulfur meter combustion

DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

国家市场监督管理总局、中国国家标准化管理委员会, carbon sulfur meter combustion

GB/T 40111-2021 Standard test method for fluorine,chlorine and sulfur in petroleum products—Combustion-ion chromatography

Jiangsu Provincial Standard of the People's Republic of China, carbon sulfur meter combustion

DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Instrument Society of America (ISA), carbon sulfur meter combustion

ISA TR84.00.05-2009 Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS)

Professional Standard - Electron, carbon sulfur meter combustion

SJ/T 11018-2016 Analytical methods for pure silver brazing for electron device Determination of sulphur by combustion-iodimetry