ZH
RU
ES

National Standard Copper Temperature Coefficient

National Standard Copper Temperature Coefficient, Total:96 items.

In the international standard classification, National Standard Copper Temperature Coefficient involves: Metrology and measurement in general, Thermodynamics and temperature measurements, Measurement of volume, mass, density, viscosity, Mechanical testing, Radiation measurements, Acoustics and acoustic measurements, Interface and interconnection equipment, Vibrations, shock and vibration measurements, Linear and angular measurements, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Quality, Measurement of time, velocity, acceleration, angular velocity, Water quality, Radiocommunications.

RU-GOST R, National Standard Copper Temperature Coefficient

GOST R 8.940-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Copper-zinc alloys. Temperature coefficient of linear expansion and electrical resistivity temperature range from 300 to 2/3 temperature of melting
GOST 8.018-2007 State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K
GOST 8.018-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring temperature coefficient of linear expansion in the range from 90 to 1800 K
GOST 8.177-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring heat conductivity of solid frames in the range of temperature 90 to 300 K
GOST 8.158-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring temperature coefficient of linear expansion in the range 4,2-90 K
GOST 8.547-1986 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases
GOST R 51233-1998 State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements
GOST 8.106-2001 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the radiance and radiant intensity of heat sources within temperature range of 220 - 1360 K
GOST 8.106-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schdule for means measuring radiance and radiant intensity of heat sources within temperature range of 220-900 K
GOST 8.062-1985 State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales
GOST 8.512-1984 State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of non-aqueous liquids
GOST R 8.854-2013 State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. Methods of calibration
GOST 8.461-2009 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods
GOST 8.461-1982 State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration
GOST 8.511-1984 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K
GOST 8.079-1979 State system for ensuring the uniformity of measurements. State primary standard of temperature unit in the range of 13,81 to 273,15k
GOST 8.475-1982 State system for ensuring the uniformity of measurements. Standard noise figure and equivalent noise temperature of amplifiers and receivers. Measurement procedure
GOST R 8.571-1998 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration
GOST R 8.943-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Telluritny glasses of system TeO2 + R2O and their fusions. Thermal conductivity in the temperatures range from 300 to 800 K and concentration of oxides o
GOST 8.317-1978 State system for ensuring the uniformity of measurements. Standard glass mercury thermometers. Methods and means of calibration
GOST 8.205-2014 State system for ensuring the uniformity of measurements. State verification schedule for measurement means of tristimulus values, chromaticity coordinates, index whiteness and gloss
GOST R 8.814-2013 State system for ensuring the uniformity of measurements. The cells for the reference points of the temperature scale. Standard procedure for verification and calibration
GOST R 8.855-2013 State system for ensuring the uniformity of measurements. Standart platinum and rhodium-iron resistance thermometers. General requirements and test methods
GOST 8.648-2015 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the parameters of deviations of form and position of rotation
GOST R 8.661-2009 State system for ensuring the uniformity of measurements. Oil moisture meters. Norms of metrological characteristics
GOST R 8.934-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Titanates of strontium and barium. Lattice parameters in the concentration range from 0 at. % to 50 % at. Ba
GOST 8.296-2015 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the surface roughness parameters Rmax, Rz in the range from 0,001 to 3000 mm and Ra in range from 0,001 to 750 mm
GOST R 8.800-2012 State system for ensuring the uniformity of measurements. State primary standart and state verification schedule for means measuring vibration displacement, vibration velocity and vibration acceleration over the frequency range from 1·10 -1 to 2·10 4 Hz
GOST 8.181-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring of evolvent surfaces's parameters
GOST R 8.747-2011 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block
GOST 8.078-1979 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means of measuring temperature with in the range 1,5-4,2 k
GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST 8.188-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to
GOST R 56087.4-2014 System of national standards for quality of telecommunication services. Quality of services of local, long-distance and international telephone communication. Normative values for quality indices of telephone calls
GOST 8.141-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K
GOST 8.159-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring specific heat-conduction of solid frames in the range of temperatures 400-1800 K
GOST 8.312-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 -
GOST 8.168-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring plasma temperatures of 5000-15000 K in the infrared
GOST 8.176-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat-conduction of solid frames in the range of temperature 1800-3000 K
GOST 8.178-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means, measuring specific heat of solids at temperature from 90 to 273,15 K
GOST R 8.815-2013 State system for ensuring the uniformity of measurements. Secondary standarts of the units of length, velocity and acceleration by vibration of a solid body. Technique of comparisons
GOST R 8.566-1996 The state system for ensuring the uniformity of measurements. Standard radiation sources (reference sources) in form of black body models for temperature range -50 +2500 °C. Standard procedure for metrological certification and verification
GOST R 51000.9-1997 State system for standardization of the Russian Federation. Accreditation system in the Russian Federation. General criteria for certification bodies operating certification of personnel
GOST 8.289-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measurement of constant angular acceleration within the range of 1 up to 100 rad/s2
GOST 8.323-2016 State system of ensuring the uniformity of measurements. Standard frequency and time signals radiated by specialized radio stations of the State service of time, frequency and the Earth rotation parameters determination. Main parameters
GOST 8.084-1979 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means measuring temperature with in the range 4,2-13,81 k
GOST 8.296-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for instruments measuring surface roughness parameters Rmax and Rz in range 0,025 - 1600 mkm
GOST 8.476-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring linear accelerometers in the range of frequencies from 0.5 to 30Hz
GOST 8.037-1981 State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz
GOST 8.288-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measring the angular velocity in the range of 5·10 in minus 8 degree up to 2,5·10 in minus 4 degree rad/s
GOST R 8.936-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Pyezokeramik on the LiaKbNacNbdTamSbnO3+z[Bi2O3-Fe2O3]. Dielectric and piezoelectric properties at a temperature of 25 °C
GOST 8.515-2016 State system of ensuring the uniformity of measurements. Standard frequency and time signals radiated by specialized radio stations of the State service of time, frequency and the Earth rotation parameters determination. Time code

GOSTR, National Standard Copper Temperature Coefficient

GOST 8.018-2018 The State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solids from 0,01х10 -6 to 100х10 -6 К -1 substance in temperature range from 90 to 3000 K
GOST R 8.935-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Titanium. Lattice constants for the temperature range from 5 K to 300 К. Linear temperature expansion coefficient for the temperature range from 5 К to 1
GOST R 8.941-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Materials for standard LTEC. Graphite GIP-4. Linear temperature expansion coefficient for the temperature range from 20°C to 2500°C
GOST R 8.987-2020 State system for ensuriug the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients) over a temperature ran
GOST R 8.938-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Liquid and gaseous propane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperature from 86 К up to 700 K and pressure up to
GOST R 8.939-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Optically transparent materials based on CaLa2S4 – La2S3. Thermal conductivity in the temperature range from 80 K to 400 K
GOST R 8.937-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Segnetoelectric ceramic materials based on niobates of sodium and potassium. Dielectric and piezoelectric characteristics at temperatures from 0°С to 100
GOST R 8.990-2020 State System for Ensuring the Uniformity of Measurements. Standard reference data. Liquid and gaseous ethylene. Thermodynamic properties at temperatures from 104 K up to 450 K and pressures up to 100 MPa
GOST R 8.989-2020 State System for Ensuring the Uniformity of Measurements. Standard reference data. Liquid and gaseous benzene. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 280 K to 725 K and pressures up to 100 MPa
GOST R 8.992-2020 State system for ensuring the uniformity of measurements. Standard reference data. Armko iron. Nickel. Temperature coefficient linear expansion and electrical resistivity in the temperature range from 300 K to 1000 K
GOST R 8.967-2019 State system for ensuring the uniformity of measurements. Transfer units of time, frequency and time scale national UTC(SU) from the State primary standard of the Russian Federation with the use of the GLONASS system. Classification. Measurement uncertain
GOST R 8.954-2018 State system for ensuring the uniformity of measurements. Standard reference data. Vanadium. Lattice parameters. Coeffi cient of linear thermal expansion in the range of temperatures from 240 K to 400 K
GOST R 8.986-2020 State system for ensuring the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients)over a temperature ra
GOST R 8.982-2019 State system for ensuring the uniformity of measurements. Standard reference data. Titanium alloys of VT Brend. Speed of sound, relative temperature expansion, density and Young's modulus in the temperature range from 20 °С to 800 °С
GOST R 8.950-2018 State system for ensuring the uniformity of measurements. Standard reference data. Molybdenum. The parameters of the crystal lattice. Coefficient of linear thermal expansion in the temperature range from 90 K to 350 K
GOST R 8.985-2020 State system for ensuring the uniformity of measurements. State service of standard reference data on physical constants and properties of substances and materials. Standard Reference Data for Atomic Energy Service. Basic principles
GOST R 8.947-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Undecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
GOST R 8.951-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Dodecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
GOST R 8.946-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Tridecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature rang

Institute of Electrical and Electronics Engineers (IEEE), National Standard Copper Temperature Coefficient

ANSI Std N42.15-1980 American National Standard Performance Verification of Liquid-Scintillation Counting System
IEEE N42.15-1997 American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems
IEEE N42.15-1997(R2004) American National Standard Check Sources for and Verification of Liquid- Scintillation Counting Systems
ANSI/IEEE-ANS-7-4.3.2-1982 American National Standard Application Criteria for Programmable Digital Computer Systems in Safety Systems of Nuclear Power Generating Stations
IEEE/ANSI 7-4.3.2-1982 American National Standard Application Criteria for Programmable Digital Computer Systems in Safety Systems of Nuclear Power Generating Stations
IEEE Std C63.24-2021 American National Standard— Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems
IEEE/ANSI C63.24-2021 American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems
ANSI C63.24-2021 American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems

CU-NC, National Standard Copper Temperature Coefficient

INC 78-1984
NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards
INC 29-1984

Acoustical Society of America (ASA), National Standard Copper Temperature Coefficient

ASA S3.2-2020 AMERICAN NATIONAL STANDARD Method for Measuring the Intelligibility of Speech over Communication Systems

CZ-CSN, National Standard Copper Temperature Coefficient

IEC - International Electrotechnical Commission, National Standard Copper Temperature Coefficient

PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)

VE-FONDONORMA, National Standard Copper Temperature Coefficient

COVENIN 636-1974

Group Standards of the People's Republic of China, National Standard Copper Temperature Coefficient

T/SZBD 001-2022 Multi source data interface standard based on national health poverty alleviation dynamic management system

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, National Standard Copper Temperature Coefficient

JEDEC JESD33B-2004 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line

ANSI - American National Standards Institute, National Standard Copper Temperature Coefficient

X3.57-1977 Structure for Formatting Message Headings for Information Interchange Using the American National Standard Code for Information Interchange for Data Communication System Control

German Institute for Standardization, National Standard Copper Temperature Coefficient

DIN 38404-4:1976-12 German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4)
DIN 38404-4:1976 German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4)

Underwriters Laboratories (UL), National Standard Copper Temperature Coefficient

UL 60730-2-9 (ND)-2003 National Differences For UL 60730-2-9 Standard for Automatic Electrical Controls For Household and Similar Use; Part 2: Particular Requirements For Temperature Sensing Controls (First Edition)
UL 60730-2-9 (ND)-2017 National Differences For UL 60730-2-9 Standard for Automatic Electrical Controls – Part 2-9: Particular Requirements for Temperature Sensing Controls (Fourth Edition)

International Telecommunication Union (ITU), National Standard Copper Temperature Coefficient

ITU-T D.307R-1995 Remuneration of Digital Systems and Channels Used in Telecommunication Relations between the Countries of Europe and the Mediterranean Basin - Recommendations for Regional Application - Standards Rates Applicable in the International Telecommunication Se