m threaded nuts and mj threaded bolts

m threaded nuts and mj threaded bolts, Total:500 items.

In the international standard classification, m threaded nuts and mj threaded bolts involves: Fasteners, Linear and angular measurements, Screw threads, Fasteners for aerospace construction, Water quality, Construction equipment.

Military Standard of the People's Republic of China-General Armament Department, m threaded nuts and mj threaded bolts

GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances
GJB 3374-1998 Bolts with MJ thread
GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads
GJB 3377-1998 Shear resistant MJ thread high locking nut
GJB 8618-2015 GH2132 General specification for MJ threaded bolts and screws
GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
GJB 3376-1998 General specification for MJ threaded alloy steel and stainless steel bolts and screws
GJB 3580-1999 General specification for self-locking nuts with MJ threads for use at temperatures not higher than 425°C

Professional Standard - Aviation, m threaded nuts and mj threaded bolts

HB 7417～7420-1996 MJ thread short thread small hex head bolts
HB 7410～7413-1996 MJ Thread Hex Head Bolts
HB 7434～7435-1996 MJ Thread Flat Head Bolts
HB 8240-2002 Reduced hexagon nuts with nuts
HB 8240～HB 8242-2002、HB 8223-2002 MJ thread small hex nut
HB 7443-1996 Theoretical weight of MJ threaded bolts
HB 8223-2002 Small hexagonal nut with MJ thread (8223)
HB 8241-2002 Small hexagonal nut with MJ thread (8241)
HB 8242-2002 Small hexagonal nut with MJ thread (8242)
HB 6400-1990 MJ Thread Ordinary Hex Nuts
HB 8033-2002 Hexagon ladder bolts with MJ thread
HB 7362-1996 MJ thread small twelve head bolts
HB 7431～7433-1996 MJ Thread Cross Recessed Flat Head Bolts
HB 7436～7437-1996 MJ thread oblate head cone end bolts
HB 20133-2012 Nut, self-locking, decagon, MJ thread, GH4738
HB 6508-2005 Hi-lock,shear,with MJ thread
HB 8239-2002 Insert acorn nuts with MJ thread
HB 8051-2002 Nuts, insert,self-locking, with MJ thread
HB 8238-2002 Small hexagonal nut with MJ thread and blind hole
HB 8248-2002 Small hexagonal thin nut with MJ thread (8248)
HB 8249-2002 Small hexagonal thin nut with MJ thread (8249)
HB 8250-2002 Small hexagonal thin nut with MJ thread (8250)
HB 8251-2002 Small hexagonal thin nut with MJ thread (8251)
HB 8234-2002 MJ thread hexagon thick self-locking nut
HB 8247-2002 Small hexagonal thin nut with MJ thread (8247)
HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
HB 20067-2011 Bolts, short MJ threads, flat head, for big interfere fit
HB 20066-2011 Bolts, long MJ threads, flat head, for big interfere fit
HB 7438-1996 MJ thread cross recessed 100° countersunk head bolts
HB 7438-2013 MJ thread cross recessed 100° countersunk head bolts
HB 8252-2002 Reduced hexagon slotted thick nuts with MJ thread
HB 8052-2002 Reduced hexagon thick slotted nuts with MJ thread
HB 8053-2002;HB 8063-2002 Self-locking corner anchor nuts with MJ thread
HB 8054-2002 Self-locking two-lug anchor nuts with MJ thread
HB 8055-2002 Self-locking,single-lug anchor nuts with MJ thread
HB 8058-2002 Self-locking,two lug anchor nuts, with MJ thread
HB 8059-2002 Self-locking,corner anchor nuts, with MJ thread
HB 8063-2002 Corner anchor self-locking nut with MJ thread
HB 8232-2002 Hexagonal thick self-locking nut with MJ thread (8232)
HB 8236-2002 Hexagonal thin self-locking nut with MJ thread (8236)
HB 8237-2002 Free anchor self-locking nut with MJ thread
HB 8244-2002 Small thin hexagonal nut with MJ thread (8244)
HB 8245-2002 Small thin hexagonal nut with MJ thread (8245)
HB 8246-2002 Small thin hexagonal nut with MJ thread (8246)
HB 8254-2002 Small hexagonal grooved nut with MJ thread (8254)
HB 8255-2002 Small hexagonal grooved nut with MJ thread (8255)
HB 8269-2002 Hexagonal thick self-locking nut with MJ thread (8269)
HB 8293-2002 Small thin hexagonal nut with MJ thread (8293)
HB 8053-2002 MJ thread angle bracket self-locking nut
HB 8382-2013 GH2132 MJ thread twelve angle self-locking nut
HB 8383-2013 GH4738 MJ thread twelve angle self-locking nut
HB 8243-2002 Small thin hexagonal nut with MJ thread (8243)
HB 8235-2002 Hexagonal thin self-locking nut with MJ thread (8235)
HB 8253-2002 Small hexagonal grooved nut with MJ thread (8253)
HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
HB 7422～7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
HB 20065-2011 Bolts, short MJ threads, 90° countresunk head, for big interfere fit
HB 20064-2011 Bolts, long MJ threads, 90° countresunk head, for big interfere fit
HB 8025-2002 General specification for MJ thread bolts and screws,in titanium alloy TC16
HB 8045-2002 Self-locking hexagon,slotted,thick nuts with MJ thread
HB 8046～8048-2002 Self-locking hexagon,slotted,thick nuts with MJ thread
HB 8049-2002 Self-locking hexagon,slotted,thin nuts with MJ thread
HB 8050-2002 Self-locking hexagon,slotted,thin nuts with MJ thread
HB 8064-2002 Self-locking,floating,right angle anchor nuts with MJ thread
HB 8257-2002 Small hexagonal grooved thin nut with MJ thread (8257)
HB 8258-2002 Small hexagonal grooved thin nut with MJ thread (8258)
HB 8259-2002 Small hexagonal grooved thin nut with MJ thread (8259)
HB 8256-2002 Small hexagonal grooved thin nut with MJ thread (8256)
HB 7442-1996 MJ thread polished rod tolerance band r6 short thread cross recessed 100° countersunk head bolts
HB 7441-1996 MJ thread polished rod tolerance band h8 short thread cross recessed 100° countersunk head bolts
HB 8034-2002 90°countersunk head ladder bolts with MJ thread,slotted
HB 7440-1996 MJ Thread Cross Recessed 100° Countersunk Taper Bolts
HB 8056-2002 Self-locking,single-lug double holes anchor nuts, with MJ thread
HB 8057-2002 Self-locking,single-lug single holes anchor nuts, with MJ thread
HB 8061-2002 Self-locking,sealed,two lug anchor nuts, with MJ thread
HB 8062-2002 Self-locking,sealed,corner anchor nuts, with MJ thread
HB 8046-2002 Hexagonal grooved thick self-locking nut with MJ thread (8046)
HB 8047-2002 Hexagonal grooved thick self-locking nut with MJ thread (8047)
HB 8048-2002 Hexagonal grooved thick self-locking nut with MJ thread (8048)
HB 8387-2013 Self-locking nuts for double lugs traveling plate with MJ thread
HB 7414-1996 MJ thread polished rod tolerance with f9 hex head bolts
HB 7454-1997 General specification for MJ threaded alloy steel and stainless steel bolts and screws
HB 7425～7427-1996 MJ thread polished rod tolerance f7 short thread small hexagon head bolts for hinge connection
HB 7428～7430-1996 H6 short thread small hexagon head bolts with MJ thread smooth rod tolerance for hinge connection
HB 8060-2002 Self-locking,sealed,single lug,double holes anchor nuts, with MJ thread
HB 8369-2013 Aluminum alloy light shear type MJ thread high lock nut
HB 8386-2013 GH2132 MJ thread ten angle self-locking nut with countersink
HB 8355-2013 TC4 thread tolerance with 6e head 2 fuse holes MJ long thread hex head bolts
HB 20135-2012 Nut, self-locking double hexagon, counterbored, MJ thread, GH4738
HB 8384-2013 GH2132 MJ thread twelve angle self-locking nut with countersink
HB 0-1-1974 The position of the threaded part of the bolt in the nut and interlayer
HB 0-1-1983 The position of the threaded part of the bolt in the nut and interlayer
HB 7439-1996 MJ thread polished rod tolerance f9 cross recessed 100° countersunk head bolts
HB 8370-2013 Aluminum Light Duty Shear Resistant Sealed MJ Thread High Lock Nuts
HB 8372-2013 Aluminum alloy light shear resistant spherical MJ thread high lock nut
HB 8374-2013 Stainless steel light tensile type sealed MJ thread high lock nut
HB 8376-2013 Stainless steel light tensile type spherical MJ thread high lock nut
HB 0-1-2003 Protrusion of the Thread of Bolt over the Nut and Position of the Thread of Bolt Relating to the Grip
HB 4636-1992 Specifications for thread rolling wheels for machining high-strength steel MJ threaded bolts
HB 20132-2012 Nut, self-locking, flanged, hexagon, MJ thread, GH4738
HB 7596-1998 Test method for MJ threaded self-locking nuts when the service temperature is not higher than 425°C
HB 7686-2001 General specification for MJ thread self-locking nuts with service temperature higher than 425°C
HB 7687-2001 Test method for MJ threaded self-locking nuts used at temperatures above 425°C
HB 8381-2013 GH2132 MJ thread hexagonal self-locking nut with flange and without closing section
HB 7595-2011 General specification for nuts, self-locking, with maximum operating temperature less than or equal to 425 ℃
HB 8377-2013 Aluminum Alloy Light Duty Shear Resistant Sealed MJ Thread Double Hex High Lock Nut
HB 8356-2013 TC4 thread tolerance with 4h6h polished rod tolerance with f9 head 1 fuse hole MJ extended thread hex head bolt

CZ-CSN, m threaded nuts and mj threaded bolts

CSN 01 4311-1962 Matching of threads. Deviation of major diameter of bolt thre ad and of minor diameter of nut threada
CSN 02 1065-1953 Screws and nuts. Matching of thread
CSN 01 3010-1962 Representation and dimensioning of threads, bolts and nuts
CSN 11 0450-1959 Packing Nuts vs. Metric Threads
CSN 02 1005 Cast.5-1984 Bolts, serews and nuts - technical spe-cif ícations. Set serews and similar thread-ed fasteners not under tensile stresses

Association Francaise de Normalisation, m threaded nuts and mj threaded bolts

NF L22-246:1989 Aircraft bolts and nuts. Bolt, bihexagonal head. ISO M thread. 4G class. Fine pitch.
NF L22-236:1989 Aircraft bolts and nuts. Bolt, bihexagonal head. ISO M thread 4G class.
NF L05-230-2:1990 AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.
NF L22-237:1989 Aircraft bolts and nuts. Bolt, bihexagonal head, with locking hole. ISO M thread 4G class.
NF L22-455:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-457:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-458:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-442:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-433:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-519:2000 Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC
NF L22-247:1989 Aircraft bolts and nuts. Bolt, bihexagonal head, with locking hole. ISO M thread. 4G class. Fine pitch.
NF L22-570:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-441:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-568:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF EN 2943:2019 Série aérospatiale - Filets rapportés, filetages MJ et M - Spécification technique
NF E03-014*NF ISO 262:1999 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
NF L22-574:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-458:1987 HEXAGONAL CASTELLATED NUTS. NORMAL HEIGHT. ISO LH THREAD. 4H CLASS.
NF L22-590:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-451:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF L05-224:1990 Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.
NF L22-440:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-439:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-436:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-573:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-572:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-587:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-589:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-592:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-567:2001 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.
NF L22-462:2000 Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-461:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-589:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF E25-800-0:1994 Fasteners. Bolts for corrugated steel pipes. Part 0 : bolts related prescriptions (screws + nuts).
NF L22-750:1954 Boulonnerie aéronautique à filetage SIm - Axes graisseurs
NF L22-431:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.
NF L22-569:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeerature)/235 oC.
NF L22-576:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-596:2000 Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-588:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-571:2000 Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-575:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-512:2001 Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC
NF L22-569:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-596:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-541:2001 Aircraft bolts and nuts - Hexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC or in heat resisting steel, silver plated - Classification : 1 100 MP
NF L22-525:1999 Aircraft bolts and nuts. Bihexagonal nuts, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated. Classification : 1550 MPa (at ambient temperature)/260 degrees Celsius.
NF L22-432:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.
NF L22-443:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-444:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-437:2000 Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-577:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-595:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-594:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-593:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-453:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF L22-587:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC
NF L22-590:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-588:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-570:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-525:2001 Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC
NF L22-567:1999 Aircraft bolts and nuts. Nuts, anchor, self-locking, two lug, with counterbore, ISO M threads, in steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/235 degrees Celsius.
NF L22-438:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-591:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-568:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-567:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-576:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L22-434:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class
NF L22-461:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS WITH LOCKING HOLES. ISO RH THREAD,4H5H CLASS,FINE PITCH.
NF L22-575:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L22-594:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-462:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS WITH LOCKING HOLES.ISO LH THREAD,4H5H CLASS,FINE PITCH.
NF L24-020:1989 Aerospace. Alloy steel bolts with strength classification 1100 MPa and mj threads. Procurement specification.
NF L22-592:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-591:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-571:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L24-980*NF EN 2943:2019 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification
NF L22-541:1999 Aircraft bolts and nuts. Hexagonal nuts, self-locking, ISO M threads, in steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/260 degrees Celsius, or heat resisting steel, silver plated. Classification : 1100 MPa (at
NF E03-015*NF ISO 263:2004 ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6 in.
NF L22-512:1997 Aircraft bolts and nuts. Hexagonal nuts, self-locking, with counterbore and captive washer, ISO M threads, in steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/235 degrees Celsius.

International Organization for Standardization (ISO), m threaded nuts and mj threaded bolts

ISO 5855-2:1999 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts
ISO 5855-2:1981 Aerospace construction — MJ threads — Part 2: Dimensions for bolts and nuts
ISO 5855-2:1988 Aerospace; MJ threads; part 2: limit dimensions for bolts and nuts
ISO 262:1998 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
ISO 262:2023 ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO 262:1973 ISO general purpose metric screw threads; Selected sizes for screws, bolts and nuts
ISO 13595:2000 Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions

CH-SNV, m threaded nuts and mj threaded bolts

VSM 15355-1955 Rough milling of hexagonal bolts and nuts, metric ISO thread M 1...M 100
SN ISO 3521:1984 Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage
SNV 24568-1957 Threaded pin with plug. Metric thread M 6 to M 20
VSM 15363.2-1955 Threaded pin with plug. Metric thread M 3 to M 5.5
SN 640 280-1985 Pointed threaded pin. Metric bolts M 1 to M 5.5
SN 219 505/26-1980 Thermoplastics pipelinesLong term hydrostatic strength design of pressure pipelinesChoice of the tube serie S
SN ISO 105/E12:1984 Textiles — Tests for colour fastness Section C01: Colour fastness to washing: Test 1
VSM 15327.2-1956 Feste KupplungenTyp P (Paβschrauben)mit langen Nabenfür zylindrische Wellenenden1)Hauptabmessungen für Schraubenkreisdurchmesserk = 400 ... 1200 mm
SEV 138-1938 bolt. Metric ISO threads M 1 to M 150 with rounded bottom
SNV 24776-1937 Threaded pin with cone. Metric bolts M 1 to M 5.5
VSM 23780-1973 Hexagonal bolt 90°, with small nut, without rod, size m. Metric ISO thread M 3 to M 8
SNV 137 202.4-1970 Hexagonal bolt with stem, specification g. Metric ISO thread M 10 to M 24
VSM 11857-1974 Rodless hexagonal bolt, specification g. Metric ISO thread M 10 to M 20
SN 210 901/2-1983 Textile Floor Coverings - Suitability ranges
SNV 742 401.9-1971 Hexagonal bolts with stem, specifications m and mg. Metric ISO thread M 18 to M 52
VSM 33650-1969 Cylindrical head bolts with stem, size m. Metric ISO thread M 1.6 to M 20
SN ISO 105/P01:1984 Textiles — Tests for colour fastnessSection E03: Colour fastness to chlorinated water (swimming-bath water)
SNV 81509-1952 Hexagonal nut ≈ 0.8 d Specification g． Metric ISO thread M 10 to M 60
VSM 15285-1967 Higher hexagonal nut. Specifications m and mg. Metric ISO thread M 2 to M 39
SNV 57610-1949 Hexagonal bolts with stem, size g. Metric ISO thread M 27 to M 52
SN ISO 898/1:1981 Textiles — Tests for colour fastness Section Z02: Colour fastness to metals in the dye-bath:hon and copper
VSM 77208-1970 Steel structural bolts with hexagonal nuts. Metric ISO thread M12 to M30
VSM 18687.3-1964 Hexagonal bolt heads and nuts. Metric ISO thread. Basic dimensions and limits
SN 234 340-1982 Shell end mills with tenon drive
SN 010 901-1978 Rodless hexagonal bolts with small hexagon; plug, size m. Metric ISO thread M 6 to M 30
SN 591 385/11-1990 Testing of Textiles: Twist of Ring-Spun Yarns - Determination by Simple Untwist I Retwist Method
VSM 13179-1968 Hexagonal bolts with stem, specifications m and mg. Metric ISO thread M1.6 to M16

BE-NBN, m threaded nuts and mj threaded bolts

NBN 719 F-1967 Screw; Bolt; Nut; Thread outlet (ISO metric thread)
NBN 555 F-1966 Hexagonal nut, quality standard M or G ISO metric thread
NBN-EN 2752-1993 Aerospace series. Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235 C

Professional Standard - Aerospace, m threaded nuts and mj threaded bolts

QJ 2090-1991 MJ threaded fasteners 1100MPa/235°C pan head short threaded bolts
QJ 2085-1991 MJ threaded fasteners 1100MPa/235°C countersunk head short thread bolts
QJ 1977-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head short thread bolts
QJ 1747-1989 Strength classification and temperature classification of bolts and nuts for MJ threaded fasteners
QJ 2738.3-1995 MJ Thread Tap Short Shank Nut Tap
QJ 2738.4-1995 MJ Thread Tap Long Shank Nut Tap
QJ 2091-1991 MJ threaded fasteners 1100MPa/235°C pan head close tolerance short thread bolts
QJ 2086-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance short thread bolts
QJ 1978-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head close tolerance short thread bolts
QJ 2770-1995 MJ Thread 1100MPa/235℃Titanium Alloy Hexagon Head Close Tolerance Short Thread Bolts
QJ 1750-1989 Test method for MJ threaded fastener bolts
QJ 2083-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head bolts
QJ 2088-1991 MJ threaded fasteners 1100MPa/235℃ pan head bolts
QJ 2602-1994 Technical conditions for MJ thread 1100MPa titanium alloy bolts
QJ 1975-1990 MJ threaded fasteners 1100MPa/235℃ hex head bolts
QJ 2769-1995 MJ thread 1100MPa/235℃ titanium alloy hex head bolts
QJ 2420-1992 MJ threaded fastener 1100MPa/235℃ hexagonal self-locking nut
QJ 1981-1990 MJ Thread Fastener 1100MPa/235℃ Hexagon Slotted Nut
QJ 1979-1990 MJ threaded fasteners 1100MPa/235℃ hexagonal ordinary nuts
QJ 2089-1991 MJ threaded fasteners 1100MPa/235℃ pan head tight tolerance bolts
QJ 2826-1996 MJ Thread Titanium Alloy Flat Head Close Tolerance High Lock Bolts
QJ 2084-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance bolts
QJ 1980-1990 MJ threaded fasteners 900MPa/235℃ hexagonal ordinary book nuts
QJ 1982-1990 MJ Thread Fastener 900MPa/235℃ Hexagon Slotted Thin Nut
QJ 1757-1989 Technical conditions of 1100MPa alloy steel bolts for MJ threaded fasteners
QJ 1748-1989 Shape and position tolerances of bolts for MJ threaded fasteners
QJ 2825-1996 MJ Thread Titanium Alloy Small Countersunk Head Tight Tolerance High Lock Bolts
QJ 1976-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head tight tolerance bolts
QJ 1749-1989 Shape and position tolerances of MJ threaded fastener nuts
QJ 2410-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with one ear plate
QJ 2412-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with two lugs
QJ 2414-1992 MJ threaded fasteners 1100MPa/235°C 90° angled plate self-locking nut
QJ 1758-1989 Specifications for 1100MPa heat-resistant stainless steel bolts for MJ threaded fasteners
QJ 2417-1992 MJ threaded fastener 1100MPa/235℃Single lug floating pallet self-locking nut
QJ 2418-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with two lugs and floating pallets
QJ 2411-1992 MJ threaded fasteners 1100MPa/235℃ small size self-locking nut with one ear bracket
QJ 2413-1992 MJ threaded fasteners 1100MPa/235℃ small size self-locking nut with double ear plate
QJ 2416-1992 MJ threaded fasteners 1100MPa/235℃ small size angled plate self-locking nut
QJ 2415-1992 MJ threaded fasteners 1100MPa/235℃ small size 90° angle plate self-locking nut
QJ 2419-1992 MJ threaded fasteners 1100MPa/235℃ small size self-locking nuts with two ears traveling plate
QJ 2421-1992 MJ threaded fasteners 1100MPa/235℃ Hexagon self-locking nuts with washers and counterbore

IN-BIS, m threaded nuts and mj threaded bolts

IS 10980 Pt.2-1984 Specification for bolts and nuts for aerospace use (MJ thread) Part 2 Dimensions of bolts and nuts
IS 12241-1987 ISO Universal Metric Screw Threads—Selected Dimensions for Screws, Bolts, and Nuts

Society of Automotive Engineers (SAE), m threaded nuts and mj threaded bolts

SAE AS3062C-1979 Bolts, Screws and Studs, Screw Thread Requirements
SAE AS3062C-1988 Bolts, Screws and Studs - Screw Thread Requirements
SAE MA3288-1985 NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC
SAE MA3288-2012 NUT, PLAIN HEX – UNS S66286, MJ THREAD, METRIC
SAE MA3350-2012 NUT, CASTELLATED, HEX - UNS S66286, MJ THREAD, METRIC
SAE MA3344-2012 NUT, PLAIN HEX - THIN, UNS S66286 MJ THREAD, METRIC
SAE MA3433-2006 NUT, SELF LOCKING - SHANK UNS N07001, SILVER PLATE MJ THREAD, METRIC
SAE MA3433A-2014 Nut, Self Locking - Shank UNS N07001, Silver Plate MJ Thread, Metric
SAE MA3426-2006 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422-2006 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3425B-2013 Nut, Castellated, Hex-UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3426B-2021 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422B-2021 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA1518-1986 BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING, METRIC THREADS - DESIGN PARAMETERS FOR
SAE MA1518B-2018 Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for
SAE MA3286A-2001 BOLT, MACHINE-HEX HEAD-PD SHANK-MJ THREAD, AMS 5731, METRIC
SAE MA3286-1995 BOLT, MACHINE-HEX HEAD-PD SHANK-MJ THREAD, AMS 5731, METRIC
SAE AS1132G-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE AS1132K-2021 Bolts, Screws, and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE MA3425-2006 NUT, CASTELLATED, HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3302A-1985 Nut, Plain Hex-UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3302A-2006 NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3354A-2006 NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3424-2006 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3423-2006 NUT, PLAIN HEX - DRLD, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3421-2006 NUT, PLAIN HEX - DRLD, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3424A-2020 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3374-1995 BOLTS & SCREWS, UNS S66286 650°C, 900 MPa, MJ Thread, Procurement Specification for, Metric
SAE AS1132H-2008 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE MA3354C-2014 NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3428-2006 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3427-2006 NUT, CASTELLATED, HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3354-2001 Nut, Plain Hex-Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3428C-2021 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA2521A-2023 NUT - HEX, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC
SAE AS1132F-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch Series - Design Standard
SAE MA3289A-2006 BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE MA3344-1985 Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric FSC 5310; UNS S66286
SAE MA2521-2012 NUT - HEX, PORT FITTING CONNECTOR, AMS 5639, MJ THREAD, METRIC
SAE AS1337A-1974 Selected Aerospace Diameter Pitch Combinations of Metric 60 Degree Screw Threads for Nuts and Bolts
SAE MA1518B-1998 Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE AS1337A-2018 Selected Aerospace Diameter Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts
SAE MA4044-2012 NUT, SPANNER - END SLOTS, CUPWASHER LOCKED, UNS S66286, SILVER PLATED, MJ THREAD, METRIC
SAE MA3430-2006 NUT, SELF LOCKING-REDUCED HEX DRIVE, AMS-6322, CADMIUM PLATED, MJ THREAD, METRIC
SAE MA1573-2004 Nut, Self-Locking - Steel, Class 1100 MPa/235°C, MJ Thread Procurement Specification For, Metric
SAE MA3349-2012 NUT, SELF LOCKING - REDUCED HEX DRIVE, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA2520A-2023 NUT - HEX, BACK-UP RING, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC
SAE RS-723-1-1973 RS723 Selected Aerospace Diameter-Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts
SAE MA3304A-1987 Bolt - Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric
SAE MA3266-1987 Nut, Self Locking - Spline Drive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286
SAE AS65300-1-2013 AS65300 Bolt, 100° Countersunk Head, Spiral Drive, MJ Thread, Split Pin Hole Option, Titanium Alloy (1100 MPa, 315°C)
SAE MA1943-1987 NUT, SELF LOCKING - UNS N07001, 760°C, 1250 MPa & 1100 MPa, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA1568-2012 Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric
SAE MA3444-2006 NUT, SELF LOCKING - SPLINE DRIVE, CAPTIVE WASHER, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3266-2012 NUT, SELF-LOCKING - SPLINE DRIVE, EXTENDED WASHER UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3353-2001 Nut, Self-Locking - Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3429-2006 NUT, SELF LOCKING, SPLINE DRIVE, EXTENDED WASHER, UNS N07001, SILVER PLATE, MJ THREAD, METRIC
SAE MA2520-2012 NUT - HEX, BACK-UP RING, PORT FITTING CONNECTOR, AMS 5639, MJ THREAD, METRIC
SAE MA3444A-2014 NUT, SELF LOCKING - SPLINE DRIVE, CAPTIVE WASHER, UNS S66286, SILVER PLATE, MJ THREAD, METRIC

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, m threaded nuts and mj threaded bolts

GJB 5879-2006 Specification for bolts and screws, MJ thread, Corrosion and resistant steel GH 2132

SAE - SAE International, m threaded nuts and mj threaded bolts

SAE MA3288A-2018 NUT@ PLAIN HEX – UNS S66286@ MJ THREAD@ METRIC
SAE MA3350A-2018 NUT@ CASTELLATED@ HEX - UNS S66286@ MJ THREAD@ METRIC
SAE MA3344A-2018 NUT@ PLAIN HEX - THIN@ UNS S66286 MJ THREAD@ METRIC
SAE MA3376A-1986 Bolts & Screws@ UNS G87400 860 MPa@ MJ Thread@ Procurement Specification for@ Metric
SAE MA3425-1985 Nut@ Castellated@ Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (FSC 5310; UNS G87400; Reaffirmed Noncurrent Sept 2001)
SAE MA3426A-2016 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422A-2016 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3302-1985 Nut@ Plain Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA1518A-1987 Bolts@ Screws and Nuts - External Wrenching@ Metric Threads - Design Parameters for
SAE MA1518C-2019 Bolts@ Screws@ and Nuts - External Wrenching@ Metric Threads - Design Parameters for
SAE MA3286B-1987 BOLT@ MACHINE-HEX HEAD-PD SHANK-MJ THREAD@ AMS 5731@ METRIC
SAE MA3286B-2004 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3286A-1990 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3286C-2018 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3421-1985 Nut@ Plain Hex - Drld@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (UNS G87400; Reaffirmed Noncurrent Sept 2001)
SAE MA3421A-2007 Nut@ Plain Hex - Drld@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3302A-1996 Nut@ Plain Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (Reaffirmed Noncurrent November 2001; UNS G87400;)
SAE MA3302B-2010 NUT@ PLAIN HEX - UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3424A-2016 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3350-1985 Nut@ Castellated@ Hex - UNS S66286@ MJ Thread@ Metric (FSC 5310; UNS S66286)
SAE MA3354-1985 Nut@ Plain Hex - Thin@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3423-1985 Nut@ Plain Hex - Drld@ UNS S66286@ Silver Plate@ MJ Thread@ Metric
SAE MA3433-1989 Nut@ Self Locking - Shank UNS N07001@ Silver Plate@ MJ Thread@ Metric (FSC 5310)
SAE MA3302C-2014 NUT@ PLAIN HEX - UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3423A-2015 NUT@ PLAIN HEX - DRLD@ UNS S66286@ SILVER PLATE@ MJ THREAD@ METRIC
SAE MA3421B-2013 NUT@ PLAIN HEX - DRLD@ UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3354B-2010 NUT@ PLAIN HEX - THIN@ UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3428B-2016 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422-1985 Nut@ Plain Hex - UNS S66286@ Silver Plate@ MJ Thread@ Metric (UNS S66286)
SAE MA3289B-2009 BOLT@ MACHINE-HEX HEAD-PD SHANK MJ THREAD@ AMS6322@ CADMIUM PLATE@ METRIC
SAE MA3289A-1996 Bolt@ Machine-Hex Head-PD Shank MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3289-1987 Bolt@ Machine-Hex Head- PD Shank MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3289C-2014 BOLT@ MACHINE-HEX HEAD-PD SHANK MJ THREAD@ AMS6322@ CADMIUM PLATE@ METRIC
SAE MA3430-1990 Nut@ Self Locking-Reduced Hex Drive@ AMS-6322@ Cadmium Plated@ MJ Thread@ Metric (FSC 5310; Reaffirmed Noncurrent Sept 2001)
SAE MA3424-1985 Nut@ Plain Hex - Thin@ UNS S66286@ Silver Plate@ MJ Thread@ Metric (UNS S66286)
SAE MA3430A-2007 NUT@ SELF LOCKING-REDUCED HEX DRIVE@ AMS 6322@ CADMIUM PLATED@ MJ THREAD@ METRIC
SAE MA3430B-2013 NUT@ SELF LOCKING-REDUCED HEX DRIVE@ AMS 6322@ CADMIUM PLATED@ MJ THREAD@ METRIC
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA4044-1990 NUT@ SPANNER - END SLOTS@ CUPWASHER LOCKED@ UNS S66286@ SILVER PLATED@ MJ THREAD@ METRIC
SAE MA3430-1996 Nut@ Self Locking-Reduced Hex Drive@ AMS-6322@ Cadmium Plated@ MJ Thread@ Metric
SAE MA3349-1987 Nut@ Self Locking - Reduced Hex Drive@ UNS S66286@ Silver Plate@ MJ Thread@ Metric
SAE MA4044A-2018 NUT@ SPANNER - END SLOTS@ CUPWASHER LOCKED@ UNS S66286@ SILVER PLATED@ MJ THREAD@ METRIC
SAE MA3349A-2018 NUT@ SELF LOCKING - REDUCED HEX DRIVE@ UNS S66286@ SILVER PLATE@ MJ THREAD@ METRIC
SAE MA2520-1986 NUT - HEX@ BACK-UP RING@ PORT FITTING CONNECTOR@ AMS 5639@ MJ THREAD@ METRIC
SAE MA3354A-1996 Nut@ Plain Hex - Thin@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (FSC 5310; UNS G87400)
SAE MA3304B-2013 BOLT-MACHINE@ HEX HEAD@ DRILLED@ PD SHANK@ MJ THREAD@ AMS 6322@ CADMIUM PLATE@ METRIC
SAE MA1568A-2018 Nut@ Self Locking - UNS S66286@ 425°C & 650°C@ 1100 MPa@ MJ Thread@ Procurement Specification For@ Metric
SAE MA3444-1990 Nut@ Self Locking - Spline Drive@ Captive Washer@ UNS S66286@ Silver Plate@ MJ Thread@ Metric
SAE MA3353-1987 Nut@ Self Locking - Spline Drive@ Extended Washer@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3266A-2018 NUT@ SELF-LOCKING – SPLINE DRIVE@ EXTENDED WASHER UNS S66286@ SILVER PLATE@ MJ THREAD@ METRIC
SAE MA3429A-2014 NUT@ SELF LOCKING@ SPLINE DRIVE@ EXTENDED WASHER@ UNS N07001@ SILVER PLATE@ MJ THREAD@ METRIC

BR-ABNT, m threaded nuts and mj threaded bolts

ABNT P-PB-97-1970 Bolts, nuts and similar threaded accessories
ABNT NB-171-1973 Markings related to bolts, nuts and threads

Korean Agency for Technology and Standards (KATS), m threaded nuts and mj threaded bolts

KS W 1551-2001 Aerospace-MJ threads-Part 2:Limit dimensions for bolts and nuts
KS W ISO 5855-2:2005 Aerospace－MJ threads－Part 2：Limit dimensions for bolts and nuts

German Institute for Standardization, m threaded nuts and mj threaded bolts

DIN ISO 5855-2:2009-07 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English
DIN ISO 5855-2 Berichtigung 1:2020-01 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English; Corrigendum 1
DIN 65208:2016-11 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 65208:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 80704:2021-12 Bow nuts and eyebolts - Metric screw thread / Note: Date of issue 2021-11-05*Intended as replacement for DIN 80704 (1968-08), DIN 81698 (1973-03).
DIN 65501:2001 Aerospace - Shims for anchor nuts with MJ-thread
DIN 65501:2016-12 Aerospace series - Shims for anchor nuts with MJ-thread
DIN ISO 262:1999-11 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) / Note: To be replaced by DIN ISO 262 (2022-11).
DIN ISO 262:2022-11 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO/DIS 262:2022); Text in German and English / Note: Date of issue 2022-10-14*Intended as replacement for DIN ISO 262 (1999-11).
DIN 65501:2016 Aerospace series - Shims for anchor nuts with MJ-thread
DIN 65500:1984 Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy
DIN 65391:2002-11 Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 65220:2002-11 Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C
DIN 65330:1987-08 Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 65534:1992-09 Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C
DIN 65392:2002-11 Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C
DIN ISO 5855-2:2009 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English
DIN 65524:1984-07 Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN ISO 262:1999 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
DIN 65510:1984-07 Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C
DIN 65249:1987-02 Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C
DIN 65509:1984 Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 °C
DIN EN 2943:2020-04 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification; German and English version EN 2943:2019 / Note: To be replaced by DIN EN 2943 (2022-07).
DIN EN 2943:2023-08 Aerospace series - Insert, MJ and M screw threads, helical coil - Technical specification; German version ASD-STAN prEN 2943:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN 2943 (2020-04).
DIN 65245:1984-07 Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C
DIN 65510:1984 Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C
DIN EN 2943:2020 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification; German and English version EN 2943:2019
DIN 65268:1986 Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65347:2002-11 Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C
DIN EN 3005:2005-09 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN ...
DIN 65477:2003-11 Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 65358:2011 Aerospace - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts

IT-UNI, m threaded nuts and mj threaded bolts

UNI 5418-1964 Metric threads; nuts and bolts; metric threads with diameter ≥1.6mm and pitch ≥0.35mm; transition to ISO regulations for nuts and bolts
UNSIDER 3-1951 Imperial threaded raw bolts with medium nuts
UNI 5546-1965 Iso metric threads with triangular profile. Limits of size of the coarse class threads with 7h/8g tolerance, for bolts, screws and nuts.
UNI 5544-1965 Iso metric threads with triangular profile. Limits of size of the close class threads with 4h5h/4h tolerance, for bolts, screws and nuts.
UNI 5545-1965 Iso metric threads with triangular profile. Limits of size of the medium class thrads with 6h/6g tolerance, for bolts, screws and nuts.

未注明发布机构, m threaded nuts and mj threaded bolts

DIN 65208 E:2014-09 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
BS 1083:1965(2000) Specification for Precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
DIN 65501 E:2014-10 Aerospace series - Shims for anchor nuts with MJ-thread
BS 916:1953(2000) Specification for Black bolts screws and nuts — Hexagon & Square, With B.S.W. Threads, and Partly Machined Bolts, Screws & Nuts, Hexagon & Square With B.S.W. or B.S.F. Threads
BS 1769:1951(1999) Specification for Unified black hexagon Bolts, screws, nuts — (UNC & UNF threads) — Heavy series
BS EN 2943:2019(2020) Aerospace series — Inserts, MJ and M screw threads, helical coil — Technical specification
BS 1768:1963(1999) Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF Threads) Normal series
DIN 65268 E:2019-12 Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65268 E:2008-05 Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C

AT-ON, m threaded nuts and mj threaded bolts

ONORM M 5030-1980 Weld studs (single end studs); without nut - with hexagonal nut; Metrie ISO-thread
ONORM M 5022-1979 Countersunk nip bolts; without nut - with hexagonal nut, Metrie ISO-thread
ONORM M 5016-1973 Cup square bolts without and with nuts; ISO-metric screw thread
ONORM M 5025-1979 Countersunk Square bolts with short Square; without nut - with hexagonal nut, Metrie ISO-thread

SE-SIS, m threaded nuts and mj threaded bolts

SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
SIS SMS 2171-1966 Metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
SIS SS 2160-1988 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
SIS SMS 2161-1972 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
SIS SMS 2160-1972 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
SIS SS-ISO 5855-2:1990 Aerospace — MJ threads — Part 2: Limit dimensions for bolts and nuts
SIS SS-ISO 5855/2:1983 Aerospace construction - MJ threads - Part 2: Dimensions for bolts and nuts

PL-PKN, m threaded nuts and mj threaded bolts

PN M02037-1970 Metric screw threads Selected sizes for screws bolts and nuts
PN L01402-1989 Aerospace screw threads Dimensions and tolerances for bolts, screws and nuts

American National Standards Institute （ANSI), m threaded nuts and mj threaded bolts

ANSI/SAE J123-1994 Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
ANSI/ASME B1.3-2007 Screw Thread Gaging Systems for Dimensional Acceptability – Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

ZA-SANS, m threaded nuts and mj threaded bolts

SANS 1700-2-22:2004 Fasteners Part 2: Screw threads Section 22: Aerospace - MJ threads - Limit dimensions for bolts and nuts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, m threaded nuts and mj threaded bolts

GB/T 42180-2022 A286 bihexagonal head bolts with long length MJ threads for aerospace
GB/T 42179-2022 MJ thread spline-drive self-locking nuts for aerospace
GB/T 36153-2018 Aluminium alloy MJ threads inserts of self-locking floating nut for aviation
GB/T 42095-2022 Self-locking two lug anchor self-aligning floating nuts with MJ threads for aerospace

British Standards Institution (BSI), m threaded nuts and mj threaded bolts

BS A 324:1998 Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient t...
BS ISO 262:2023 ISO general purpose metric screw threads. Selected sizes for bolts, screws, studs and nuts
BS ISO 262:1998 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
BS ISO 262:1999 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
BS 3A 212:1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in2 (Unified hexagons, 3A Unified threads and close tolerance shanks)
BS A 335:1999 Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimen...
BS A 300:1989 Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
BS A 327:1998 Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1...
BS EN 2943:2019 Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
BS 2A 58:1962 Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft
BS A 363:2000 Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification

TR-TSE, m threaded nuts and mj threaded bolts

TS 1995-1975 OMMY SCREVVS W1TH CLAMPING BOLTS, WnH METRIC THREAD

Standard Association of Australia （SAA）, m threaded nuts and mj threaded bolts

AS/NZS 2465:1999 Unified hexagon bolts, screws and nuts (UNC and UNF threads)
AS/NZS 2451:1998 Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)
AS B148:1956 Unified black hexagon bolts, screws and nuts (UNC and UNF threads) and plain washers - Heavy series

RU-GOST R, m threaded nuts and mj threaded bolts

GOST 18126-1994 Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18126-1972 Bolts, studs and nuts with thread diameter over 48 mm. Specifications

Danish Standards Foundation, m threaded nuts and mj threaded bolts

DS/ISO 262:1999 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
DS/ISO 262:1986 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts

AENOR, m threaded nuts and mj threaded bolts

UNE 17703:2004 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.

American Society of Mechanical Engineers (ASME), m threaded nuts and mj threaded bolts

ASME B1.3-1941 Screw Thread Gaging Systems for Acceptability:Inch and Metric Screw Threads (UN,UNR,UNJ,M,MJ)
ASME B1.3-2007(R2022) Screw Thread Gaging Systems for Acceptability: Inch & Metric Screw Threads (UN,UNR,UNJ,M,MJ)
ASME B1.3M-1992 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ)
ASME B1.3M Errata-1994 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ); Errata

TZ-TBS, m threaded nuts and mj threaded bolts

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

Professional Standard - Machinery, m threaded nuts and mj threaded bolts

JB/ZQ 4247-2006 Regular screw threads - Remaining length of inner and outer thread, remaining length for drilling, end length of convex nut of bolt

Taiwan Provincial Standard of the People's Republic of China, m threaded nuts and mj threaded bolts

CNS 4229-1978 ISO Metric Screw Threads-Selected Sizes for Screws, Bolts and Nuts

ES-UNE, m threaded nuts and mj threaded bolts

UNE-EN 3833:2019 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification (Endorsed by Asociación Española de Normalización ...
UNE-EN 2943:2019 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification (Endorsed by Asociación Española de Normalización in January of 2020.)
UNE-EN 3005:2004 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1 210 MPa (at ambient temperature) / 730° C - Technical specification (Endorsed by AENOR in March...
UNE-EN 4047:2004 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600° C - Technical specification (Endorsed by AENOR in February of 20...

TH-TISI, m threaded nuts and mj threaded bolts

TIS 159-1975 Standard for general purpose iso metric screw threads and selected sizes for screws, bolts and nuts

Japanese Industrial Standards Committee (JISC), m threaded nuts and mj threaded bolts

JIS B 0205-3:2001 ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts

AR-IRAM, m threaded nuts and mj threaded bolts

IRAM 5192-1953 Bolt head and nut are hexagonal or square, dimensions of ordinary bolts with Whitworth thread

Professional Standard - Construction Industry, m threaded nuts and mj threaded bolts

JG/T 5057.2-1995 Construction machinery and equipment.High strength bolts with hexagon head.Full thread