ZH
RU
ES

particulate matter total suspended particulate matter

particulate matter total suspended particulate matter, Total:497 items.

In the international standard classification, particulate matter total suspended particulate matter involves: Vocabularies, Air quality, TESTING, Particle size analysis. Sieving, Tobacco, tobacco products and related equipment, Analytical chemistry, Pesticides and other agrochemicals, Welding, brazing and soldering, Protective equipment, Cereals, pulses and derived products, Measurement of fluid flow, Environmental protection, Construction equipment, Agricultural machines, implements and equipment, Domestic, commercial and industrial heating appliances, Extraction and processing of petroleum and natural gas, Internal combustion engines, Farming and forestry, Fuels, Burners. Boilers, Non-metalliferous minerals, ENERGY AND HEAT TRANSFER ENGINEERING, Hydraulic fluids, Fertilizers, Continuous handling equipment, Floor treatment appliances, Soil quality. Pedology, Plastics, Mining and quarrying, Construction materials, Geology. Meteorology. Hydrology, Coatings and related processes used in aerospace industry, Domestic electrical appliances in general, Products of the chemical industry, Fluid power systems, Products of the textile industry, Chipless working equipment, Miscellaneous domestic and commercial equipment, Natural gas, Elements of buildings, Special purpose vehicles, Road engineering, Petroleum products in general, Lubricants, industrial oils and related products, Ventilators. Fans. Air-conditioners, Transport, Paint ingredients, Paints and varnishes, Medical equipment, Quality, Water quality, Clothes, Occupational safety. Industrial hygiene, Road vehicle systems, Power stations in general, Aerospace fluid systems and components.


Standard Association of Australia （SAA）, particulate matter total suspended particulate matter

  • AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
  • AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
  • AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
  • AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
  • AS/NZS 3580.9.12:2013
  • AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
  • AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
  • AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
  • AS/NZS 3580.9.15:2014
  • AS/NZS 3580.9.7:2009
  • AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
  • AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
  • AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
  • AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
  • AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
  • AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases

National Metrological Verification Regulations of the People's Republic of China, particulate matter total suspended particulate matter

  • JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler
  • JJG 943-2011 Verification Regulation of Total Suspended Particulates Sampler

National Metrological Technical Specifications of the People's Republic of China, particulate matter total suspended particulate matter

  • JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers
  • JJF 2060-2023 Production of Sub-micron and Nanometer Particle Size Reference Materials

Association of German Mechanical Engineers, particulate matter total suspended particulate matter

  • VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
  • VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
  • VDI 4300 Blatt 11-2013 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM2,5-fraction
  • VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
  • VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 2260-2003 Technical warranty for gas cleaning equipment - Particulate and gaseous matter
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
  • VDI 3491 Blatt 7-1987 Particulate matter measurement; generation of test aerosols; Rapaport-Weinstock generator
  • VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
  • VDI 3491 Blatt 6-1980 Particulate matter measurement; generation of test aerosols; platinum oxide generator

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, particulate matter total suspended particulate matter

  • GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
  • GB/T 21133-2007 Environmental tobacco smoke.Estimation of its contribution to respirable suspended particles.Method based on solanesol
  • GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
  • GB/T 38413-2019(英文版) Textiles—Test methods for filtration of particulate matter
  • GB/T 29511-2013 Protective clothing.Chemical protective clothing against solid particulates
  • GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
  • GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
  • GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
  • GB 11667-1989 Hygienic standard for inhalable particles in ambient air of residential areas
  • GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
  • GB 2626-2006 Respiratory protective equipment. non-powered air-purifying particle respirator

Professional Standard - Environmental Protection, particulate matter total suspended particulate matter

  • HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method
  • HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
  • HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration
  • HJ 1264-2022 Technical guideline for fine particulate matter (PM2.5) monitoring based on satellite remote sensing

Japanese Industrial Standards Committee (JISC), particulate matter total suspended particulate matter

  • JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
  • JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
  • JIS T 8151:2005 Particulate respirators
  • JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
  • JIS B 9930:1993 Hydraulic fluids -- Determination of particulate contamination by the particle count method
  • JIS T 8157:2018 Powered air purifying respirator for particulate matter

Beijing Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • DB11/T 2056-2022 Technical specifications for grid-based monitoring of total suspended particulate matter in ambient air
  • DB11/T 1485-2017 Determination of Particulate Matter in Catering Industry Manual Weighing Method
  • DB11/T 1819-2021 Technical specifications for grid monitoring and evaluation of ambient air particulate matter

Korean Agency for Technology and Standards (KATS), particulate matter total suspended particulate matter

  • KS B 3278-1992
  • KS H ISO 15593:2009 Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS H ISO 15593-2009(2019) Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS H ISO 18144:2009 Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Method based on solanesol
  • KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
  • KS M ISO 17830:2021 Solid biofuels — Particle size distribution of disintegrated pellets
  • KS H ISO 18144-2009(2019) Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Method based on solanesol
  • KS M ISO 17831-1:2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
  • KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
  • KS H ISO 17175:2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
  • KS H ISO 4387:2017 Cigarettes－Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • KS H ISO 4387:2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
  • KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
  • KS H ISO 10362-1:2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter

KR-KS, particulate matter total suspended particulate matter

  • KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
  • KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes
  • KS M ISO 17830-2021 Solid biofuels — Particle size distribution of disintegrated pellets
  • KS M ISO 17831-1-2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
  • KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
  • KS H ISO 17175-2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
  • KS H ISO 4387-2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
  • KS H ISO 10315-2022 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
  • KS Q ISO 11648-2-2016 Statistical aspects of sampling from bulk materials－Part 2：Sampling of particulate materials
  • KS H ISO 10362-1-2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter

Professional Standard - Agriculture, particulate matter total suspended particulate matter

Association Francaise de Normalisation, particulate matter total suspended particulate matter

  • NF X11-693:1983
  • NF V37-044*NF ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence.
  • NF ISO 16000-34:2019 Air intérieur - Partie 34 : stratégie pour la mesure des particules en suspension
  • NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • NF EN ISO 10882-1:2011 Hygiène et sécurité en soudage et techniques connexes - Échantillonnage des particules en suspension et des gaz dans la zone respiratoire des opérateurs - Partie 1 : échantillonnage des particules en suspension
  • NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
  • NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
  • NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
  • NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
  • NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
  • NF X34-114-1*NF EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1 : pellets
  • NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
  • NF V37-046*NF ISO 18144:2004 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol.
  • NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
  • NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
  • NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
  • NF EN ISO 5370:2023 Biocombustibles solides - Détermination de la teneur en fines des granulés
  • NF X43-249*NF EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures
  • NF EN ISO 20023:2018 Biocombustibles solides - Sécurité des granulés biocombustibles solide - Manutention et stockage en toute sécurité des granulés de bois dans les applications résidentielles et autres applications à petite échelle
  • NF V37-026*NF ISO 10315:2022 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke - Gas-chromatographic method
  • NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
  • NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
  • NF EN 60970:2007 Isolants liquides - Méthodes de détermination du nombre et de la taille des particules
  • NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
  • XP CEN/TS 17458:2021 Air ambiant - Méthode d'évaluation de la performance d'applications d'un système de modélisation de la contribution des sources de particules en suspension de type "récepteur-orienté"
  • NF ISO 11943:2021 Transmissions hydrauliques - Systèmes de comptage automatique en ligne de particules en suspension dans les liquides - Méthodes d'étalonnage et de validation
  • NF ISO 18144:2004 Fumée de tabac ambiante - Estimation de sa contribution aux particules en suspension respirables - Méthode basée sur le solanésol
  • NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
  • NF X34-240*NF EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications
  • NF ISO 8573-4:2019 Air comprimé - Mesurage des polluants - Partie 4 : teneur en particules
  • NF EN ISO 18635:2017 Qualité de l'eau - Détermination des alcanes polychlorés à chaîne courte dans les sédiments et matières en suspension (particules) - Méthode par chromatographie en phase gazeuse-spectrométrie de masse (CG-SM) et ionisation chimique négative ...
  • NF EN ISO 18846:2016 Biocombustibles solides - Détermination de la teneur en fines dans les quantités de granulés
  • NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes

International Organization for Standardization (ISO), particulate matter total suspended particulate matter

  • ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
  • ISO 18144:2003 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol
  • ISO 14411-2:2020 Preparation of particulate reference materials — Part 2: Polydisperse spherical particles
  • ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
  • ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
  • ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
  • ISO 20023:2018 Solid biofuels — Safety of solid biofuel pellets — Safe handling and storage of wood pellets in residential and other small-scale applications
  • ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • ISO/CD 8417 Risk management of particulate contamination for devices with intravascular access
  • ISO 4387:1991 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • ISO 10362-1:2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter

Taiwan Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • CNS 15091-7-2007 Method of test for deep sea water - Determination of total suspended matters
  • CNS 15091-2-2007 Method of test for deep sea water - Measurement of in-situ suspended particle transmission

农业农村部, particulate matter total suspended particulate matter

  • NY/T 3281.1-2018 Viruses Microbial pesticides Diamondback granulosa virus Part 1: Diamondback granulosa virus suspension

Danish Standards Foundation, particulate matter total suspended particulate matter

  • DS/ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • DS/EN 15210-1:2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
  • DS/EN 15150:2012 Solid biofuels - Determination of particle density
  • DS/ISO 10315:2021 Cigarettes – Determination of nicotine in total particulate matter from the mainstream smoke – Gas-chromatographic method
  • DS/EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
  • DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
  • DS/ISO 4387:1992 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/EN 14227-2:2013 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
  • DS/EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements

AENOR, particulate matter total suspended particulate matter

  • UNE-ISO 15593:2010 Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
  • UNE-ISO 18144:2010 Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Method based on solanesol
  • UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
  • UNE 51115:1985 PARTICULATE CONTAMINANT IN AVIATION TURBINE FUELS, TESTS FOR
  • UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN 14227-2:2014 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures

American Society for Testing and Materials (ASTM), particulate matter total suspended particulate matter

  • ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
  • ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM D1888-78e1 Methods of Test for Particulate and Dissolved Matter in Water
  • ASTM D6552-06 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
  • ASTM D6552-00 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
  • ASTM D3018/D3018M-09 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D5955-02(2007) Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • ASTM D5955-02 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • ASTM D5955-02(2012)e1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • ASTM D7711-23 Standard Guide for Description of Polymer Pellet Defects
  • ASTM D7711-11 Standard Guide for Description of Polymer Pellets Including Defects
  • ASTM D7711-11e1 Standard Guide for Description of Polymer Pellet Defects
  • ASTM E3269-21 Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions
  • ASTM D6225-98e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
  • ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
  • ASTM D3018/D3018M-10a Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3909/D3909M-22 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
  • ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
  • ASTM F1904-14 Standard Practice for Testing the Biological Responses to Particles in vivo
  • ASTM D3018/D3018M-11 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects
  • ASTM F1903-10 Standard Practice for Testing For Biological Responses to Particles In Vitro
  • ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
  • ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM D3018-03 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D6225-98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D3018-00 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018-03(2009) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018/D3018M-10 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D225-65(1978) Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D3018/D3018M-22 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing

Henan Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

Group Standards of the People's Republic of China, particulate matter total suspended particulate matter

PL-PKN, particulate matter total suspended particulate matter

  • PN M59108-1985 Grains óf diamond, cubic boron nitride or composite - Granular composition
  • PN G04557-1992 Water-slurry suspension. Determination of solid particles by filtration method
  • PN R74017-1968 Cereals and pulses Determination of ?he mass of 1000 grains
  • PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis
  • PN C04149-1974 Petroleum products Particulate contaminant in aviation turbin? fuels
  • PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
  • PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry
  • PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
  • PN B03262-1989 Concrete bins for storing granular materials and silags Design rules

IN-BIS, particulate matter total suspended particulate matter

SAE - SAE International, particulate matter total suspended particulate matter

  • SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
  • SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method
  • SAE R-471-2018 Reducing Particulate Emissions in Gasoline Engines
  • SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
  • SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

British Standards Institution (BSI), particulate matter total suspended particulate matter

  • BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles
  • BS ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • 19/30380724 DC Preparation of particulate reference materials — Part 2: Polydisperse spherical particles. Part 2. Polydisperse spherical particles
  • 17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • 22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • PD ISO/TS 14411-1:2017 Preparation of particulate reference materials. Polydisperse material based on picket fence of monodisperse spherical particles
  • BS ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
  • BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
  • 23/30456662 DC BS EN ISO 17830. Solid biofuels. Particle size distribution of disintegrated pellets
  • BS ISO 8573-4:2019 Compressed air. Contaminant measurement - Particle content
  • BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
  • BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
  • BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
  • BS EN 15429-3:2015 Sweepers. Efficiency of particulate matter collection. Testing and Evaluation
  • BS EN 14227-1:2013 Hydraulically bound mixtures. Specifications. Cement bound granular mixtures
  • BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
  • BS EN ISO 5370:2023 Solid biofuels. Determination of fines content in pellets
  • BS EN ISO 20023:2018 Solid biofuels. Safety of solid biofuel pellets. Safe handling and storage of wood pellets in residential and other small-scale applications
  • BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
  • BS 2782-4 Method 454G:1996 Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
  • DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
  • BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Sampling of particulate materials
  • BS ISO 10362-1:2019 Tracked Changes. Cigarettes. Determination of water in total particulate matter from the mainstream smoke. Gas-chromatographic method
  • BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • BS ISO 12584:2013 Aerospace. Hydraulic fluid components. Expression of particulate contamination levels

BE-NBN, particulate matter total suspended particulate matter

Society of Automotive Engineers (SAE), particulate matter total suspended particulate matter

  • SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD
  • SAE AMS1531D-2008 Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
  • SAE J2943-2022 Recommended Practice for Filter Weighing of Particulate Matter Emissions
  • SAE AIR4766/1-2018 Air Quality for Commercial Aircraft Cabin Particulate Contaminants

Lithuanian Standards Office , particulate matter total suspended particulate matter

  • LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN 15210-1-2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
  • LST ISO 4387:2000/A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine - AMENDMENT 1 (ISO 4387:2000/Amd.1:2008, identical)
  • LST EN 15150-2012 Solid biofuels - Determination of particle density
  • LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
  • LST EN 14530-2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements

German Institute for Standardization, particulate matter total suspended particulate matter

  • DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
  • DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
  • DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
  • DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
  • DIN EN ISO 17830:2023-02 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023); German and English version prEN ISO 17830:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 17830 (2016-11).
  • DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
  • DIN ISO 4576:2001-03 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
  • DIN EN ISO 17831-1:2016-05 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015); German version EN ISO 17831-1:2015
  • DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
  • DIN EN ISO 17830:2016-11 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016); German version EN ISO 17830:2016 / Note: To be replaced by DIN EN ISO 17830 (2023-02).
  • DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
  • DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
  • DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
  • DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
  • DIN EN 13890:2010 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods; German version EN 13890:2009
  • DIN EN ISO 20023:2019-04 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018); German version EN ISO 20023:2018
  • DIN ISO 16000-34:2019-01 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
  • DIN ISO 16000-34 Berichtigung 1:2019-05 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018); Corrigendum 1
  • DIN EN 14902 Berichtigung 1:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)
  • DIN ISO 10362-1:2021-02 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
  • DIN EN ISO 18846:2016-12 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016); German version EN ISO 18846:2016 / Note: To be replaced by DIN EN ISO 5370 (2022-03).

Professional Standard - Construction Industry, particulate matter total suspended particulate matter

  • JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method
  • JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
  • JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

European Committee for Standardization (CEN), particulate matter total suspended particulate matter

  • prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
  • EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets
  • EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
  • EN 15150:2011 Solid biofuels - Determination of particle density
  • prEN ISO 17830 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023)
  • EN ISO 17831-1:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
  • EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods
  • EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 14227-2:2013 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
  • EN ISO 13982-1:2004 Protective clothing for use against solid particulate chemicals - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulate chemicals (type 5 clothing) (ISO 13982-1:2004)

ES-UNE, particulate matter total suspended particulate matter

  • ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
  • UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
  • ISO/DIS 17830:2023 Solid biofuels — Particle size distribution of disintegrated pellets
  • UNE-EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
  • UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
  • UNE-EN ISO 20023:2020 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
  • UNE-EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements

AT-ON, particulate matter total suspended particulate matter

  • ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity
  • ONORM M 9453-1976 Emission limits for air contaminants; particulate matter emitted from asphalt processing plants

HU-MSZT, particulate matter total suspended particulate matter

Professional Standard - Petroleum, particulate matter total suspended particulate matter

  • SY/T 0531-1994 Oilfield Injection Water Suspended Particle Measurement Method Resistance Induction Method
  • SY/T 0531-2012 Determination of particle size of suspended solid in oilfield injecting water.Resistance induction method

American Society of Mechanical Engineers (ASME), particulate matter total suspended particulate matter

CL-INN, particulate matter total suspended particulate matter

PT-IPQ, particulate matter total suspended particulate matter

RO-ASRO, particulate matter total suspended particulate matter

  • STAS 10813-1976 Air purity DETERMINATION OF PARTICULATE MATTER
  • STAS 7621/2-1985 NORMAL ELECTROCORUNDUM Determination of mineralogic composition and aggregate granules content

Liaoning Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

RU-GOST R, particulate matter total suspended particulate matter

  • GOST 17.2.4.05-1983 Nature protection. Atmosphere. Gravimetric method for determination of suspended dust particles
  • GOST 21560.1-1982 Mineral fertilizers. Method for determination of grain-size analysis
  • GOST 33507-2015 Solid biofuel. Determination of particle density
  • GOST 21560.2-1982 Mineral fertilizers. Method for determination of granules static strength
  • GOST R 55124-2012 Solid biofuels. Determination of particle density
  • GOST R 59668-2021 Emissions of the polluting substances in the atmosphere. Method for calculating the concentrations of suspended particles PM2.5 and PM10 in industrial emissions based on the fractional composition of dust
  • GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
  • GOST R 55110-2012 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 1. Pellets
  • GOST 23409.23-1978 Moulding sands and sand mixtures. Method for determination of grain shape

未注明发布机构, particulate matter total suspended particulate matter

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • BS ISO 18144:2003(2009) Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Method based on solanesol

Professional Standard - Energy, particulate matter total suspended particulate matter

(U.S.) Ford Automotive Standards, particulate matter total suspended particulate matter

US-FCR, particulate matter total suspended particulate matter

Professional Standard - Building Materials, particulate matter total suspended particulate matter

Hebei Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • DB13/T 2080-2014 Biomass Pellet Fuel Burner
  • DB13/ 1578-2012 Emission Standards for Particulate Matter in Hot-dip Galvanizing Industry
  • DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method

工业和信息化部, particulate matter total suspended particulate matter

  • JC/T 2055-2020 Granular Bentonite Clay for Pet Washers
  • YB/T 4917-2021 Technical Specifications for Determination of Primary Flue Gas Particulate Matter from Converter Steelmaking

未注明发布机构, particulate matter total suspended particulate matter

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • BS ISO 18144:2003(2009) Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Method based on solanesol

API - American Petroleum Institute, particulate matter total suspended particulate matter

  • API 922-1961 REMOVAL OF PARTICULATE MATTER FROM GASEOUS WASTES FILTRATION
  • API PUBL 4772-2008 Measuring Particulate Emissions from Combustion Sources
  • API 4348-1982 ELEMENTS OF AIRBORNE PARTICLE BEHAVIOR IN THE UNITED STATES
  • API PUBL 4076-1971 EMISSIONS@ CONCENTRATIONS@ AND FATE OF PARTICULATE ATMOSPHERIC POLLUTANTS

Indonesia Standards, particulate matter total suspended particulate matter

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), particulate matter total suspended particulate matter

AWS - American Welding Society, particulate matter total suspended particulate matter

  • F1.4-1987 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
  • F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

American National Standards Institute （ANSI), particulate matter total suspended particulate matter

  • ANSI/AWS F1.1M:2006 Method for Sampling Airborne Particulates Generated by Welding and Allied Processes

NATO - North Atlantic Treaty Organization, particulate matter total suspended particulate matter

  • AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
  • STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

Professional Standard - Machinery, particulate matter total suspended particulate matter

  • JB/T 9014.3-1999 Continuous handling equipment.Loose bulk material.Determination of composition of size and pellet

VN-TCVN, particulate matter total suspended particulate matter

  • TCVN 4852-1989 Mineral fertilizers.Determination of grain static strength
  • TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter

CU-NC, particulate matter total suspended particulate matter

  • NC 74-23-1985 Cattle-Raising. Animal Feeding. Granulometry Determination
  • NC 44-04-1985 Ores. Granular Nickel Oxide Quality Specifications
  • NC 44-03-1-1986 Ores. Granular Nickel Oxide , Nodular Nickel Oxide, and Nickel Oxide Powder. Total Cobalt and Nickel Determination Method

IT-UNI, particulate matter total suspended particulate matter

Jiangsu Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

Shanxi Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

CEN - European Committee for Standardization, particulate matter total suspended particulate matter

  • PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
  • PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
  • EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications

U.S. Military Regulations and Norms, particulate matter total suspended particulate matter

GM North America, particulate matter total suspended particulate matter

Institute of Environmental Sciences and Technology, particulate matter total suspended particulate matter

Heilongjiang Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • DB23/T 2011-2017 Guidelines for Source Apportionment and Monitoring of Atmospheric Particulate Matter
  • DB23/T 2482-2019 Laser Scattering Method for Determination of Exhaust Gas Particles from Stationary Pollution Sources

Yunnan Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

国家林业局, particulate matter total suspended particulate matter

  • LY/T 2669-2016 Technical regulations for monitoring air particulate matter in forests

Professional Standard - Meteorology, particulate matter total suspended particulate matter

  • QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., particulate matter total suspended particulate matter

Canadian Standards Association (CSA), particulate matter total suspended particulate matter

  • CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)

Xinjiang Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

Professional Standard - Petrochemical Industry, particulate matter total suspended particulate matter

  • SH/T 0093-1991 Jet Fuel Solid Particulate Contamination Method
  • SH/T 0064-1991 Distillate Fuel Free Water and Particulate Contamination Test Method

国家市场监督管理总局、中国国家标准化管理委员会, particulate matter total suspended particulate matter

  • GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification
  • GB/T 38413-2019 Textiles—Test methods for filtration of particulate matter
  • GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
  • GB 2626-2019 Respiratory protection—Non-powered air-purifying particle respirator

中国气象局, particulate matter total suspended particulate matter

  • QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications

廊坊市市场监督管理局, particulate matter total suspended particulate matter

  • DB1310/T 225-2020 Method for determining the ability of woody plants to absorb airborne particles

CZ-CSN, particulate matter total suspended particulate matter

  • CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
  • CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
  • CSN 83 4611-1982 Measurement of solid particulate emissions from stationary sources

中华人民共和国国家卫生和计划生育委员会, particulate matter total suspended particulate matter

  • GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air

North Atlantic Treaty Organization Standards Agency, particulate matter total suspended particulate matter

  • STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

VE-FONDONORMA, particulate matter total suspended particulate matter

SE-SIS, particulate matter total suspended particulate matter

Professional Standard - Railway, particulate matter total suspended particulate matter

  • TB/T 3208-2008 Specification of Antifreeze Liquids for the Loose Granular Goods Transportation

GOSTR, particulate matter total suspended particulate matter

  • GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets
  • GOST 33196-2014 Distillate fuels. Determination of free water and particulate contamination by visual inspection method

Shandong Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • DB37/T 4378-2021 Portable beta-ray method for the determination of particulate matter in ambient air
  • DB37/ 1996-2011 Integrated Emission Standards for Air Particulate Matter from Stationary Sources in Shandong Province

Professional Standard - Commodity Inspection, particulate matter total suspended particulate matter

  • SN/T 4059-2014 Determination of magnetic metal particles in paprika condiment for export

TH-TISI, particulate matter total suspended particulate matter

  • TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

Tianjin Provincial Standard of the People's Republic of China, particulate matter total suspended particulate matter

  • DB12/T 756-2017 Retrofitting Particulate Matter Capture in Diesel Engined Freight Vehicles

Professional Standard - Electricity, particulate matter total suspended particulate matter

  • DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants

工业和信息化部/国家能源局, particulate matter total suspended particulate matter

  • JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil

  TSP, Suspended particulate matter, total suspended particulate matter in the air, airborne total suspended particulate matter, Total suspended particulate matter particle size, Total Suspended Particulate Matter Effect, Total Suspended Particulate Matter Detection, TSP gravimetric method, Total Suspended Particulate Matter Analysis Method, TSP gravimetric method, Total suspended particulate matter + gravimetric method, Total suspended particulate matter concentration, Today's total suspended particulate matter concentration, Total suspended particulate matter concentration, Total Suspended Particulate Air, Total Suspended Particulate Matter and Particulate Matter, Total suspended particulate matter concentration 50, Concentration of total suspended particulate matter, particulate matter total suspended particulate matter, Total suspended particulate matter:.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved