ZH
RU
ES
Stress test analysis
Stress test analysis, Total:500 items.
In the international standard classification, Stress test analysis involves: Thermodynamics and temperature measurements, Aerospace fluid systems and components, Fluid storage devices, Measurement of force, weight and pressure, Chipless working equipment, Aerospace engines and propulsion systems, Plastics, Footwear, Nuclear energy engineering, Radiation measurements, Ground service and maintenance equipment, Burners. Boilers, Installations in buildings, Analytical chemistry, Electromechanical components for electronic and telecommunications equipment, Non-destructive testing, Testing of metals, Fluid power systems, Metalliferous minerals, Astronomy. Geodesy. Geography, Equipment for petroleum and natural gas industries, Earthworks. Excavations. Foundation construction. Underground works, Welding, brazing and soldering, Glass, Cases. Boxes. Crates, Road vehicle systems, Power transmission and distribution networks, Mechanical testing, Products of the chemical industry, Iron and steel products, Elements of buildings, Construction materials, Miscellaneous domestic and commercial equipment, Environmental testing, Sports equipment and facilities, Water quality, Acoustics and acoustic measurements, Transformers. Reactors, Power stations in general, Electricity. Magnetism. Electrical and magnetic measurements, Protective equipment, Paints and varnishes, Fuels, Coals, Rubber and plastics products, Products of the textile industry, Surface treatment and coating.
WRC - Welding Research Council, Stress test analysis
- BULLETIN 227-1977 TEST OF TORISPHERICAL PRESSURE VESSEL HEADS CONVEX TO PRESSURE; REFERENCE STRESS CONCEPTS FOR CREEP ANALYSIS
- BULLETIN 200-1974 ANALYSIS OF TEST DATA ON BRANCH CONNECTIONS EXPOSED TO INTERNAL PRESSURE AND OR EXTERNAL COUPLES
- BULLETIN 425-1997 A REVIEW OF METHODS FOR THE ANALYSIS OF BURIED PRESSURE PIPING
- BULLETIN 246-1979 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS
- BULLETIN 135-1968 CYCLIC PRESSURE TESTS OF FULL SIZE PRESSURE VESSELS
- BULLETIN 303-1985 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (THIRD EDITION)
- BULLETIN 336-1988 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (FOURTH EDITION)
- BULLETIN 38-1957 PROOF-TESTING PRESSURE VESSELS DESIGNED FOR INTERNAL PRESSURE
- BULLETIN 4-1950 TESTING PRESSURE VESSELS EFFECT OF WELDING ON PRESSURE VESSEL STEELS
- BULLETIN 269-1981 INTERPRETIVE REPORT ON DYNAMIC ANALYSIS OF PRESSURE COMPONENTS (SECOND EDITION)
American Society for Testing and Materials (ASTM), Stress test analysis
- ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E1782-03 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM E1782-98 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM E1782-22 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1005-15 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
- ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E1005-97 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
- ASTM E1005-16 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
- A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
- ASTM F218-12 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
- ASTM F218-13(2020) Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
- ASTM F218-05 Standard Test Method for Analyzing Stress in Glass
- ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM F218-95 Standard Test Method for Analyzing Stress in Glass
- ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM F1052-20 Standard Test Method for Pressure Testing Vapor Protective Suits
- ASTM E1005-03e1 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
- ASTM E1005-03 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
- ASTM E1194-01 Standard Test Method for Vapor Pressure
- ASTM E1194-87(1993)e1 Standard Test Method for Vapor Pressure
- ASTM E1194-17 Standard Test Method for Vapor Pressure
- ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
- ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
Korean Agency for Technology and Standards (KATS), Stress test analysis
- KS B 6728-1995 Stress and fatigue analyses for pressure vessels
- KS B 6728-2015 Stress and fatigue analyses for pressure vessels
- KS B 6728-2015(2020) Stress and fatigue analyses for pressure vessels
- KS B 6730-1995 Pressure and leak tests for pressure vessels
- KS W 3114-1993 Aircraft-Ground Pressure testing connections for pressure cabins
- KS W 3114-2013 AIRCRAFT-GROUND PRESSURE TESTING CONNECTIONS FOR PRESSURE CABINS
- KS W 3114-2003(2008) AIRCRAFT-GROUND PRESSURE TESTING CONNECTIONS FOR PRESSURE CABINS
- KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
- KS B ISO 10771-1:2006 Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method
- KS B ISO 10771-1:2013 Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method
- KS C IEC 60512-4-1-2005(2010) Connectors for electronic equipment-Tests and measurements-Part 4-1:Voltage stress tests-Test 4a:Voltage proof
SAE - SAE International, Stress test analysis
Society of Automotive Engineers (SAE), Stress test analysis
- SAE AIR5436A-2019 Test Cell Analytical Thrust Correction
- SAE AMS2615E-2002 Pressure Testing, Hydraulic, Pressure as Specified
- SAE AIR5436-2012 Test Cell Analytical Thrust Correction
- SAE AMS2616B-1982 PRESSURE TESTING, HYDRAULIC 200 psig
- SAE MAM2620-1982 PRESSURE TESTING, HYDRAULIC 7000 kPa
- SAE MAM2616-1982 PRESSURE TESTING, HYDRAULIC 1500 kPa
- SAE AMS2620B-1982 PRESSURE TESTING, HYDRAULIC 1000 psig
- SAE AMS2625B-1982 PRESSURE TESTING, HYDRAULIC 2500 psig
- SAE MAM2625-1982 PRESSURE TESTING, HYDRAULIC 17,500 kPa
- SAE AMS2615G-2023 Pressure Testing, Hydraulic Pressure as Specified
- SAE AMS2602C-1985 PRESSURE TESTING 25 psig
- SAE AMS2607A-1944 PRESSURE TESTING 100 psi
- SAE AMS2605D-1995 PRESSURE TESTING 55 psi
- SAE AMS2607C-1985 PRESSURE TESTING 100 psig
- SAE AMS2601B-1944 PRESSURE TESTING 10 psi
- SAE MAM2606-1985 PRESSURE TESTING 485 kPag
- SAE AMS2602A-1944 PRESSURE TESTING 25 psi
- SAE AMS2607D-1995 PRESSURE TESTING 100 psi
- SAE MAM2605-1985 PRESSURE TESTING 380 kPag
- SAE MAM2607A-1995 PRESSURE TESTING 690 kPa
- SAE AMS2606E-1995 PRESSURE TESTING 70 psi
- SAE MAM2604-1982 PRESSURE TESTING 380 kPa
- SAE MAM2601-1982 PRESSURE TESTING 170 kPa
- SAE MAM2606A-1995 PRESSURE TESTING 485 kPa
- SAE AMS2606D-1985 PRESSURE TESTING 70 psig
- SAE MAM2602-1985 PRESSURE TESTING 170 kPag
- SAE AMS2606B-1944 PRESSURE TESTING 70 psi
- SAE AMS2605C-1985 PRESSURE TESTING 55 psig
- SAE MAM2607-1985 PRESSURE TESTING 690 kPag
- SAE MAM2605A-1995 PRESSURE TESTING 380 kPa
- SAE AMS2602D-1995 PRESSURE TESTING 25 psi
- SAE AMS2605A-1944 PRESSURE TESTING 55 psi
- SAE MAM2602A-1995 PRESSURE TESTING 170 kPa
- SAE AMS2601D-1982 PRESSURE TESTING 10 psig
- SAE AMS2615C-1985 PRESSURE TESTING, HYDRAULIC Pressure As Specified
- SAE AMS2615B-1977 PRESSURE TESTING, HYDRAULIC Pressure As Specified
- SAE AMS2615A-1974 PRESSURE TESTING, HYDRAULIC Pressure As Specified
- SAE AMS2615D-1995 PRESSURE TESTING, HYDRAULIC Pressure as Specified
- SAE AMS2610-2018 Pressure Testing, Gaseous Media Pressure as Specified
- SAE AMS2616A-1974 PRESSURE TESTING, HYDRAULIC 200 psi (1380 kPa)
- SAE AMS2615-1945 PRESSURE TESTING Hydraulic - As Specified
- SAE AMS2625A-1974 PRESSURE TESTING, HYDRAULIC 2500 psi (17,200 kPa)
- SAE AMS2620A-1974 PRESSURE TESTING, HYDRAULIC 1000 psi (6900 kPa)
- SAE MAM2615A-1995 PRESSURE TESTING, HYDRAULIC Pressure as Specified, Metric
- SAE MAM2615-1985 PRESSURE TESTING, HYDRAULIC Pressure As Specified, Metric
- SAE ARP6249-2020 Hydraulic Pump Minimum Inlet Pressure Test
- SAE AMS2607B-1977 PRESSURE TESTING 100 psi (690 kPa)
- SAE AMS2602B-1977 PRESSURE TESTING 25 psi (172 kPa)
- SAE MAM2604A-1988 PRESSURE TESTING, AIR 275 kPa
- SAE MAM2601A-1988 PRESSURE TESTING, AIR 70 kPa
- SAE AMS2606C-1978 PRESSURE TESTING 70 psi (483 kPa)
- SAE AMS2601C-1975 PRESSURE TESTING 10 psi (69 kPa)
- SAE AMS2605B-1978 PRESSURE TESTING 55 psi (380 kPa)
- SAE AMS2620-1940 PRESSURE TESTING 1000 lb per sq in (Hydraulic)
- SAE AMS2625-1940 PRESSURE TESTING 2500 lb per sq in (Hydraulic)
- SAE AMS2616-1940 PRESSURE TESTING 200 lb per sq in (Hydraulic)
- SAE J745-1986 HYDRAULIC POWER PUMP TEST PROCEDURE
- SAE J745-1996 Hydraulic Power Pump Test Procedure
- SAE AMS2606A-1942 PRESSURE TESTING 70 lbs. per eq. in.
- SAE AMS2606-1940 PRESSURE TESTING 70 lb per sq in
- SAE AMS2601-1940 PRESSURE TESTING 10 lb per sq in
- SAE AS1284-2011 STANDARD TEST PROCEDURE AND LIMIT VALUE FOR SHUTOFF SURGE PRESSURE OF PRESSURE FUEL DISPENSING SYSTEMS
- SAE AS1284A-2007 STANDARD TEST PROCEDURE AND LIMIT VALUE FOR SHUTOFF SURGE PRESSURE OF PRESSURE FUEL DISPENSING SYSTEMS
- SAE AMS2601A-1942 PRESSURE TESTING 10 lbs. per sq. in.
- SAE AMS2607-1942 PRESSURE TESTING 100 lbs. per sq. in.
- SAE AMS2602-1942 PRESSURE TESTING 25 lbs. per sq. in.
- SAE AMS2605-1942 PRESSURE TESTING 55 lbs. per sq. in.
- SAE ARP6344-2020 Standard Test Procedure and Limit Value for Shutoff Surge Pressure for Fixed Pressure Fuel Dispensing Systems
Japanese Industrial Standards Committee (JISC), Stress test analysis
- JIS B 8281:1993 Stress and fatigue analyses for pressure vessels
- JIS Z 2342:2003 Methods for acoustic emission testing of pressure vessels during pressure tests and classification of test results
- JIS B 6402:1997 Mechanical power presses -- Testing of the accuracy
- JIS R 9301-3-4:1999 Alumina powder -- Part 3: Methods of chemical analysis -- 4: Decomposition by acid in pressure vessel
ESDU - Engineering Sciences Data Unit, Stress test analysis
American National Standards Institute (ANSI), Stress test analysis
CZ-CSN, Stress test analysis
DE-GPVA, Stress test analysis
American Welding Society (AWS), Stress test analysis
- WRC 200:1974 Analysis of Test Data on Branch Connections Exposed to Internal Pressure and/or External Couples
- WRC 004:1950 Part 1: Testing Pressure Vessels
- WRC 472:2002 A Review of Methods for the Analysis of Buried Pressure Piping
- WRC 425:1997 A Review of Methods for the Analysis of Buried Pressure Piping
- WRC 135:1968 Cyclic Pressure Tests of Full Size Pressure Vessels
- WRC 038:1957 Proof-Testing Pressure Vessels Designed for Internal Pressure
- WRC 561:2015 Finite Element Analysis of Stress Rupture in Pressure Vessels Exposed to Accidental Fire Loading
Fujian Provincial Standard of the People's Republic of China, Stress test analysis
Professional Standard - Nuclear Industry, Stress test analysis
- EJ/T 1022.14-1996 Stress Analysis and Seismic Analysis of Valves in PWR Nuclear Power Plant
- EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature
- EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
YU-JUS, Stress test analysis
German Institute for Standardization, Stress test analysis
- DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
- DIN 4018 Bb.1:1981 Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis
- DIN 4018 Beiblatt 1:1981-05 Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis
- DIN EN 60512-4-1:2004-01 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard until ...
- DIN EN 437:2019 Test gases - Test pressures - Appliance categories
- DIN EN 437:2021-07 Test gases - Test pressures - Appliance categories; German version EN 437:2021 / Note: This standard is part of the DVGW body of rules.
- DIN EN 837-1:1997-02 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
- DIN EN ISO 22476-6:2018-12 Geotechnical investigation and testing - Field testing - Part 6: Self-boring pressuremeter test (ISO 22476-6:2018); German version EN ISO 22476-6:2018
- DIN EN ISO 22476-8:2019-03 Geotechnical investigation and testing - Field testing - Part 8: Full displacement pressuremeter test (ISO 22476-8:2018); German version EN ISO 22476-8:2018
- DIN ISO 11:1997-10 Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987)
- DIN EN 837-3:2019 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing
- DIN CEN/TS 764-8:2016-11*DIN SPEC 2930:2016-11 Pressure equipment and assemblies - Part 8: Proof test; German version CEN/TS 764-8:2016
- DIN EN 15305:2009-01 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
- DIN EN 15305 Berichtigung 1:2009-04 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
- DIN EN ISO 9117-2:2010-07 Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010); German version EN ISO 9117-2:2010
- DIN EN ISO 22282-3:2012-09 Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012); German version EN ISO 22282-3:2012
- DIN EN 837-3:1997 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
- DIN EN 13445-5/A4:2007 Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A4:2006
- DIN EN 13445-5/A1:2007 Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A1:2007
- DIN EN 13445-5/A5:2006 Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A5:2006
- DIN EN 13184:2001-07 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
- DIN 52272-1:1982 Testing of mineral fibrous insulating materials; pressure test; evaluation of compressive stress and resistance to compression
- DIN EN 60512-4-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests; Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002); German version EN 60512-4-3:2002 / Note: DIN IEC 60512-2 (1994-05) remains valid ...
API - American Petroleum Institute, Stress test analysis
- API REPORT 81-33-1982 Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections Testing and Revised Analytical Procedure
Professional Standard - Machinery, Stress test analysis
- JB 4732-1995 Steel pressure vessel - Stress analysis design standard
- JB/T 4732-1995 Steel Pressure Vessels - Analysis and Design Standards (Confirmed in 2005)
- JB/T 8639-1997 Guide for temperature rise test of oil-immersed power transformers with analysis of dissolved gases in oil
Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Stress test analysis
MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Stress test analysis
ES-AENOR, Stress test analysis
US-CFR-file, Stress test analysis
- CFR 12-46.5-2014 Banks and Banking. Part46:Annual stress test. Section46.5:Annual stress test.
- CFR 12-46.6-2014 Banks and Banking. Part46:Annual stress test. Section46.6:Stress test methodologies and practices.
- CFR 12-325.204-2014 Banks and banking. Part325:Capital maintenance. SubpartC:Annual stress test. Section325.204:Annual stress tests required.
- CFR 12-325.207-2014 Banks and banking. Part325:Capital maintenance. SubpartC:Annual stress test. Section325.207:Publication of stress test results.
- CFR 12-702.506-2014 Banks and banking. Part702:Capital adequacy. SubpartE:Capital planning and stress testing. Section702.506:Annual supervisory stress testing.
ES-UNE, Stress test analysis
- SAE AMS2610-2023 Pressure Testing, Gaseous Media Pressure as Specified
- UNE-EN 437:2022 Test gases - Test pressures - Appliance categories
- UNE-EN 837-1/AC:1998 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE-EN ISO 22476-8:2020 Geotechnical investigation and testing - Field testing - Part 8: Full displacement pressuremeter test (ISO 22476-8:2018)
- UNE-EN ISO 22476-6:2019 Geotechnical investigation and testing - Field testing - Part 6: Self boring pressuremeter test (ISO 22476-6:2018)
- UNE-EN 13445-5:2021 Unfired pressure vessels - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in June of 2021.)
- UNE-EN ISO 22476-5:2023 Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
PL-PKN, Stress test analysis
American Society of Mechanical Engineers (ASME), Stress test analysis
AENOR, Stress test analysis
- UNE 34076:1974 ANALYSIS METHODS FOR CHOCOLATE. COMPOSITION INTERVALS AND TEST METHODS.
- UNE-EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
- UNE-EN 837-1:1997 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE 34079:1976 ANALYSIS METHODS FOR CHOCOLATES. ASH DETERMINATION.
- UNE-EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
- UNE-EN 837-3:1997 PRESSURE GAUGES. PART 3: DIAPHRAGM AND CAPSULE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE 28608:1988 AIRCRAFT. PRESSURE FUEL DISPENSING SYSTEM. TEST PROCEDURE AND LIMIT VALUE FOR SHUT-OFF SURGE PRESSURE.
- UNE-EN 13184:2001 NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD.
- UNE 80113:2013 Test methods of cements. Physical analysis. Determination of the autoclave expansion
- UNE 57139:1986 PRESSURE SENSITIVE MATERIALS. TESTING OF PEEL ADHESION
- UNE 68005-2:1982 AGRICULTURAL TRACTORS. TEST PROCEDURES. PART 2. HYDRAULIC POWER AND LIFTING CAPACITY
- UNE-EN 15305:2010 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
- UNE-EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
GOSTR, Stress test analysis
Defense Logistics Agency, Stress test analysis
- DLA MIL-DTL-7961 D-2007 LIGHTS, INDICATORS, PRESS TO TEST
- DLA MIL-T-26963 D VALID NOTICE 2-2005 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1
- DLA MIL-T-26963 D NOTICE 1-1999 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1
- DLA MIL-T-26963 D-1992 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE, TYPE MP-1
Professional Standard - Energy, Stress test analysis
- NB/T 20010.10-2010 PWR nuclear power plant valve-Part 10: Stress analysis and seismic analysis
- NB/T 20403-2017RK Transient analysis of pressure and temperature in pressurized water reactor nuclear power plant compartment
- NB/T 20404-2017RK Transient Analysis of Containment Pressure and Temperature in PWR Nuclear Power Plant
- NB/T 20576-2019 Analysis of Neutron Flux Rate of Reactor Pressure Vessel in PWR Nuclear Power Plant
- DL/T 846.16-2021 General Specifications for High Voltage Test Equipment Part 16: Pressure Test Device for Power Less Oil Equipment
HU-MSZT, Stress test analysis
Association Francaise de Normalisation, Stress test analysis
- NF EN 837-3:1997 Manomètres - Partie 3 : manomètres à membrane et manomètres à capsule. Dimensions, métrologie, prescriptions et essais.
- NF EN ISO 22476-8:2018 Reconnaissance et essais géotechniques - Essais en place - Partie 8 : essai au pressiomètre refoulant
- XP CEN/TS 764-8:2016 Équipements sous pression et ensembles - Partie 8 : épreuve
- NF D30-500*NF EN 437:2021 Test gases - Test pressures - Appliance categories
- NF EN 437:2021 Gaz d'essais - Pressions d'essais - Catégories d'appareils
- NF EN 837-1:1997 Manomètres - Partie 1 : manomètres à tube de Bourdon. Dimensions, métrologie, prescriptions et essais.
- NF EN ISO 22476-5:2013 Reconnaissance et essais géotechniques - Essais en place - Partie 5 : essai au pressiomètre en préforage
- NF EN ISO 22476-6:2018 Reconnaissance et essais géotechniques - Essais en place - Partie 6 : essai pressiométrique autoforé
- NF P94-157-2:1996 Soils : investigation and testing. In situ pore pressure measurement. Part 2 : pore pressure meter.
- NF P94-521-6*NF EN ISO 22476-6:2018 Geotechnical investigation and testing - Field testing - Part 6 : self boring pressuremeter test
- NF P94-157-1:1996 Soils : investigation and testing. In situ pore pressure measurement. Part 1 : piezometric tube.
- XP E01-201-8-2016 Pressure equipment and assemblies - Part 8 : proof test
- XP E01-201-8*XP CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8 : proof test
- NF EN 15305:2009 Essais non-destructifs - Méthode d'essai pour l'analyse des contraintes résiduelles par diffraction des rayons X
- NF EN ISO 9117-2:2010 Peintures et vernis - Essais de séchage - Partie 2 : essai de pression pour aptitude à l'empilement
- NF P94-521-8*NF EN ISO 22476-8:2018 Geotechnical investigation and testing - Field testing - Part 8 : full displacement pressuremeter test
- NF E86-200-5/A10:2008 Unfired pressure vessels - Part 5 : inspection and testing.
- NF E86-200-5*NF EN 13445-5:2021 Unfired pressure vessels - Part 5 : inspection and testing
- XP P94-110-2:1999 Soil : investigation and testing - Menard pressuremeter test - Part 2 : test with unload - Reload cycle
- UTE C46-302U*UTE C46-302:1983 Industrial-process measurement and control. Acceptance tests for absolute pressure, relative pressure, and differential pressure transmitters.
- NF EN IEC 61163-2:2020 Déverminage sous contraintes - Partie 2 : composants
- NF E86-200-5:2009 Unfired pressure vessels - Part 5 : inspection and testing.
- NF E86-200-5:2014 Unfired pressure vessels - Part 5 : inspection and testing
- NF X20-206:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MANOMETRIC METHOD.
- NF EN ISO 22282-3:2014 Reconnaissance et essais géotechniques - Essais géohydrauliques - Partie 3 : essais de pression d'eau dans des roches
- NF EN 60512-4-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 4-3 : essais de contrainte diélectrique - Essai 4c : tension de tenue pour fûts préisolés de sertissage
European Committee for Standardization (CEN), Stress test analysis
CEN - European Committee for Standardization, Stress test analysis
- EN 437:2021 Test gases - Test pressures - Appliance categories
- EN 437:2018 Test gases - Test pressures - Appliance categories
- EN 437:1993 Test Gases - Test Pressures - Appliance Categories (Incorporates Amendments A1: 1997 and A2: 1999)
- EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
BR-ABNT, Stress test analysis
British Standards Institution (BSI), Stress test analysis
- BS 2C 11:1988 Specification for ground pressure test connections for aircraft pressure cabins
- BS ISO 10771-1:2015 Tracked Changes. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
- BS 7020-7.1:1989 Analysis of iron ores - Methods for the determination of sulphur content - Gravimetric method
- PD IEC TS 63209-2:2022 Photovoltaic modules. Extended-stress testing. Polymeric component materials
- 20/30419078 DC BS EN 437. Test gases. Test pressures. Appliance categories
- BS EN 13445-5:2009 Unfired pressure vessels.
Part 5: Inspection and testing
- PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
- BS 6376-1:1983 Reagents for chemical analysis. Methods of test
- BS EN 437:2003 Test gases - Test pressures - Appliance categories
- BS EN 437:2021 Tracked Changes. Test gases. Test pressures. Appliance categories
- BS EN 13445-5:2009+A3:2011 Unfired pressure vessels. Inspection and testing
- BS 1016-104.1:1999 Methods for analysis and testing of coal and coke - Proximate analysis - Determination of moisture content of the general analysis test sample - Determination of ash
国家能源局, Stress test analysis
- NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
- NB/T 20404-2017 Transient analysis of pressure and temperature of containment of pressurized water reactor nuclear power plant
- SY/T 6909-2019 Petroleum pressure gauge testing device
Danish Standards Foundation, Stress test analysis
- DS/EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
- DS/EN 437+A1:2009 Test gases - Test pressures - Appliance categories
- DS/EN 437:2021 Test gases – Test pressures – Appliance categories
- DS/EN 837-1/AC:1999 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- DS/EN 837-1:1998 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
- DS/EN 837-3:1998 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
- DS/EN ISO 22476-4:2013 Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test
- DS/EN 15305/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
- DS/EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
RO-ASRO, Stress test analysis
- STAS 2250-1973 Pipe components NOMINAL PRESSURES, TEST PRES- SURES AND MAXIMUM ADMISSI- BLE WORKING PRESSURES
- STAS 1703/7-1980 POWER TRANSFORMERS Methods of test
- STAS 11053/13-1985 Testing devices for electrical purposes Pressure apparatus
- STAS 6095/4-1990 Pulps. Samples preparation for physical-mechanical tests and chemical analysis. Determinasion of drain ability
- STAS SR EN ISO 7539-7:1996 Corrosion of metals and alloys. Stress corrosion testing Part 7 : Slow strain rate testing
- SR ISO 4622:1996 Paints and varnishes - Pressure test for stackability
未注明发布机构, Stress test analysis
- BS 6755-1:1986(1998) Testing of valves — Part 1 : Specification for production pressure testing requirements
- DIN EN 437:2003 Test gases – Test pressures – Appliance categories
- NF P94-521-4*NF EN ISO 22476-4:2015 Geotechnical investigation and testing - Field testing - Part 4 : Menard pressuremeter test
- NF P94-157-2 Soils: Investigations and tests. Field pore pressure measurements. Part 2: Pore pressure gauges
- NF P94-157-1 Soils: Investigations and tests. Field pore pressure measurements. Part 1: Piezometers
- BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction
Lithuanian Standards Office , Stress test analysis
- LST EN 437-2003+A1-2009 Test gases - Test pressures - Appliance categories
- LST EN 437-2021 Test gases - Test pressures - Appliance categories
- LST EN 837-1+AC-2001 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- LST EN 837-3-2001 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
- LST EN 60512-4-1-2004 Connectors for electronic equipment. Tests and measurements. Part 4-1: Voltage stress tests. Test 4a: Voltage proof (IEC 60512-4-1:2003)
- LST EN 60512-4-3-2003 Connectors for electronic equipment. Tests and measurements. Part 4-3: Voltage stress tests. Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002)
- LST EN 15305-2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
- LST EN 15305-2008/AC-2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
AT-ON, Stress test analysis
- OENORM EN 437-2021 Test gases - Test pressures - Appliance categories
- ONORM E 1364-1971 Apparatus for pressure lest on shrouds.
- ONORM B 4432-1980 Geotechnical engineering (foundation engineering); permissible soil pressures; analysis of bearing capacity
- ONORM M 7307 Teil.3-1985 Evaluation of stress analyses on boilers or pressure vessels; stress limits for cyclic loadings
- ONORM M 7307 Teil.1-1981 Evaluation of stress analyses on boilers or pressure vessels; terms and basic requirements
- ONORM A 5524-1981 Packaging testing; Internal pressure test on glass Containers
- ONORM M 7307 Teil.2-1981 Evaluation of stress analyses on boilers or pressure vessels; stress limits for primarily noncyclic loadings
- ONORM M 7322-1986 Type-testing on welded boilers and pressure vessels nd pressure vessel/pressure generating Units
CH-SNV, Stress test analysis
IT-UNI, Stress test analysis
SE-SIS, Stress test analysis
IN-BIS, Stress test analysis
NO-SN, Stress test analysis
- NS 1717-1984 Valves - Pressure testing for valves
- NS 4000-1967 Pressure test of plastic bags by the use of the EPPT-tester
International Organization for Standardization (ISO), Stress test analysis
- ISO/TR 10771-2:2008 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods
- ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
- ISO 10100:2020 Hydraulic fluid power — Cylinders — Acceptance tests
- ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
- ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
- ISO 10771-1:2015 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
- ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ANS - American Nuclear Society, Stress test analysis
- 56.10-1982 Subcompartment Pressure and Temperature Transient Analysis in Light Water Reactors
- 56.4-1983 Pressure and Temperature Transient Analysis for Light Water Reactor Containments
Engineering Equipment and Materials Users Association (EEMUA), Stress test analysis
EEMUA - Engineering Equipment and Materials Users Association, Stress test analysis
- PUB NO 168-1991 A Guide to the Pressure Testing of In-Service Pressurised Equipment
- PUB NO 223-2010 Pressure equipment testing after repair@ modifications or re-rating: A guide to the pressure test waiver (Edition 1)
- PUB NO 168-2010 A guide to the pressure testing of in-service pressurised equipment (Edition 2)
CU-NC, Stress test analysis
- NC 44-08-1-1986 Ores. Cobalt and Nickel Sulfide Concentrate. Gravimetric Determination of Humidity
Professional Standard - Recommended Standards for Engineering Construction, Stress test analysis
FI-SFS, Stress test analysis
US-FCR, Stress test analysis
GM North America, Stress test analysis
Professional Standard - Pharmaceutical Packaging, Stress test analysis
GB-REG, Stress test analysis
Professional Standard - Petroleum, Stress test analysis
- SY/T 6261-1996 Interpretation and Analysis Method of Pressure Drop Data of Water Injection Well
- SY/T 6909-2012 Test equipment for petroleum electronic pressure gauge
- SY/T 5869-1993 Routine test of downhole pressure of self-flowing well
Indonesia Standards, Stress test analysis
- SNI 07-4077-1996 Method of tension and impact test for welded metal deposit
- SNI 09-1488-1989 Compressed-air pneumatic braking equipment, Connection for pressure test
- SNI 05-1363-1989 Mechanical press machines, Geometric test method
- SNI 07-0410-1989 Compressed bending test method of metals
- SNI 03-4164-1996 Test method for pressure strength of red brick walls in laboratory
- SNI 03-4155-1996 Test method for compressive strength of concrete using portion of beams broken flexure test specimens
- SNI 04-0353-1989 Pressure lamps, Specification and test method
- SNI 19-1654-1989 Weighted sound pressure level (weighted A), Measurement and analysis method
- SNI 06-0476-1989 Determination of covering strength of wet paint by pfund cryptometer tester
Group Standards of the People's Republic of China, Stress test analysis
- T/LAPRA 107.1-2023 Opening force value tests for liquor packaging box Part 1: Pressing and pulling tests using external force
Standard Association of Australia (SAA), Stress test analysis
Professional Standard - Electricity, Stress test analysis
- DL/T 1694.2-2017 Calibration specification for high-voltage testing instruments and equipment Part 2: Power transformer tap-changer tester
- DL/T 1814-2018 Guidelines for analysis and judgment of dissolved gas in oil-immersed power transformer factory test oil
- DL/T 911-2004 Frequency response analysis on winding deformation of power transformers
- DL/T 911-2016 Frequency response analysis on winding deformation of power transformers
BE-NBN, Stress test analysis
- NBN G 55-022-1988 Determination of waterproofness - Water pressure test
- NBN-EN 10002-2-1992 Metallic materials - Tensile testing - Part 2 : Verification of the force measuring system of the tensile testing machines
- NBN-EN 437-1994 Test gases. Test pressures. Appliance catagories
Professional Standard - Aerospace, Stress test analysis
- QJ 2119-1991 Application and Analysis of Transponder and Supersonic Wind Tunnel Missile Force Test Results
TR-TSE, Stress test analysis
- TS 2861-1977 INTERNAL PRESSURE TEST OF PRESSURE PJPE — LINES FOR WATER
ISA - International Society of Automation, Stress test analysis
- ISA RP7.1-1956 Pneumatic Control Circuit Pressure Test
- ISA S37.10-1982 Specifications and Tests for Piezoelectric Pressure and Sound- Pressure Transducers
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Stress test analysis
- GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
- GB/T 14070-1993 Gas analysis.Preparation of calibration gas mixtures.Manometric method
- GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
- GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
KR-KS, Stress test analysis
- KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
Professional Standard - Aviation, Stress test analysis
- HB 5931.6-1986 Aircraft Hydraulic System Contamination Test Contamination Degree Analysis Report Form
- HB 6136.4-1987 Flight Test Instrument (Static) Calibration Specification Stress
Military Standard of the People's Republic of China-General Armament Department, Stress test analysis
- GJB 380.6-1987 Aircraft hydraulic system pollution test pollution degree analysis report format
- GJB 380.6A-1999 Aircraft hydraulic system pollution test - pollution degree analysis report form
The American Road & Transportation Builders Association, Stress test analysis
- AASHTO T 190-2014 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils
AASHTO - American Association of State Highway and Transportation Officials, Stress test analysis
- T 190-2009 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils
- T 190-2002 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils
- T 190-2014 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Stress test analysis
- GB/T 35391-2017 Non-destructive testing—Spatial resolution phantom for industrial computed tomography (CT) testing
- GB/T 35386-2017 Non-destructive testing—Density resolution phantom for industrial computed tomography (CT) testing
PT-IPQ, Stress test analysis
U.S. Military Regulations and Norms, Stress test analysis
RU-GOST R, Stress test analysis
Canadian General Standards Board (CGSB), Stress test analysis
National Aeronautics and Space Administration (NASA), Stress test analysis
AGMA - American Gear Manufacturers Association, Stress test analysis
- 95FTM9-1995 Bending and Compressive Stress Analysis of External Helical Gearsets of Varying Contact Ratios