ZH
RU
ES
Medium elastic modulus and elasticity
Medium elastic modulus and elasticity, Total:500 items.
In the international standard classification, Medium elastic modulus and elasticity involves: Wood, sawlogs and sawn timber, Continuous handling equipment, Mechanical testing, Aircraft and space vehicles in general, Construction materials, Plastics, Wood-based panels, Testing of metals, Ceramics, Conducting materials, Glass, Iron and steel products, Wood technology processes, Earthworks. Excavations. Foundation construction. Underground works, Insulating fluids, Cellular materials, Springs, Computer graphics, Rubber, Analytical chemistry, Chipless working equipment, Powder metallurgy, Mining and quarrying, Non-destructive testing, Technical drawings, Dentistry, Pipeline components and pipelines, Adhesives, Civil engineering in general, Textile fibres, Fuels, Road vehicles in general, Road engineering, Non-ferrous metals, Paper and board, Reinforced plastics, Materials for the reinforcement of composites, Inorganic chemicals, Acoustics and acoustic measurements, Protection against fire, Non-textile floor coverings, Raw materials for rubber and plastics, Waxes, bituminous materials and other petroleum products, Soil quality. Pedology, Elements of buildings, Metrology and measurement in general, Paints and varnishes, Measurement of force, weight and pressure, Structures of buildings, Internal combustion engines.
AASHTO - American Association of State Highway and Transportation Officials, Medium elastic modulus and elasticity
- DIVISION I 8.7-1996 Modulus of Elasticity and Poisson?s Ratio
- T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
FI-SFS, Medium elastic modulus and elasticity
ACI - American Concrete Institute, Medium elastic modulus and elasticity
- ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials
European Committee for Standardization (CEN), Medium elastic modulus and elasticity
- EN ISO 9856:1995 Conveyor Belts - Determination of Elastic Modulus (ISO 9856 : 1989)
- EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- EN ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus ISO 9856:2003
- EN ISO 9856:2003/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
- EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
- EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- EN 23312:1993 Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987)
- EN 1723:1999 Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus
- EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN 12390-13:2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- DD ENV 843-2-1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature - Part 2: Determination of Elastic Moduli
ES-AENOR, Medium elastic modulus and elasticity
German Institute for Standardization, Medium elastic modulus and elasticity
- DIN 68364:2003 Properties of wood species - Density, modulus of elasticity and strength
- DIN EN ISO 9856:2017-03 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN 68364:2003-05 Properties of wood species - Density, modulus of elasticity and strength
- DIN 9835-3:1984 Elastomer pressure springs for press tools; testing and requirements
- DIN EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005); German version EN ISO 21181:2006
- DIN EN ISO 21181:2013-09 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN ISO 4823:2021-06 Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021); German version EN ISO 4823:2021
- DIN 7795:2021 Measuring compression set of elastomers in hot water
- DIN 7795:2015 Measuring compression set of elastomers in hot water
- DIN EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN 7795:2021-03 Measuring compression set of elastomers in hot water
- DIN EN ISO 9856:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003 + Amd 1:2012); German version EN ISO 9856:2003 + A1:2012
- DIN EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
- DIN EN ISO 4823:2020 Dentistry - Elastomeric impression and bite registration materials (ISO/DIS 4823:2020); German and English version prEN ISO 4823:2020
- DIN 53457:1987 Testing of plastics; determination of the elastic modulus by tensile, compression and bend testing
- DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002 + A2:2005
- DIN EN 12390-13:2019 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German and English version prEN 12390-13:2019
- DIN EN 12390-13:2021-09 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2021
- DIN EN 13286-43:2003-07 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
- DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
- DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version EN
- DIN 53529-1:1983-03 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles
- DIN EN 1081:2021-01 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance; German version EN 1081:2018+A1:2020
- DIN EN 14041:2018-05 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics; German version EN 14041:2018
- DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
- DIN 78004-2:2021 Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
- DIN EN 820-5:2009-10 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009
International Organization for Standardization (ISO), Medium elastic modulus and elasticity
- ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 9856:1989 Conveyor belts; determination of elastic modulus
- ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
- ISO 12076:2002 Steel wire ropes - Determination of the actual modulus of elasticity
- ISO 6784:1982 Concrete; Determination of static modulus of elasticity in compression
- ISO 21181:2005 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
- ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
- ISO/CD 4823:2011 Dentistry — Elastomeric impression and bite registration materials
- ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
- ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
- ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
Danish Standards Foundation, Medium elastic modulus and elasticity
- DS/EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN ISO 9856/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
- DS/ISO 4823:2021 Dentistry – Elastomeric impression and bite registration materials
- DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
- DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- DS/EN ISO 4823:2021 Dentistry – Elastomeric impression and bite registration materials (ISO 4823:2021)
- DS/EN 12390-13:2021 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression
- DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- DS/EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
Association Francaise de Normalisation, Medium elastic modulus and elasticity
- NF T47-111*NF EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- NF T47-111:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
- NF B10-511:1975 LIMESTONE - TEST FOR DYNAMIC MODULUS OF ELASTICITY.
- NF ISO 12076:2008 Câbles en acier - Détermination du module effectif d'élasticité
- NF EN ISO 9856:2017 Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité
- NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
- NF T47-111/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus - Amendment 1.
- NF T47-154*NF EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- NF EN ISO 21181:2013 Courroies transporteuses légères - Détermination du module d'élasticité relaxé
- NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
- FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
- NF S91-223*NF EN ISO 4823:2021 Dentistry - Elastomeric impression and bite registration materials
- NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
- NF P62-002*NF EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
- NF EN 13286-43:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 43 : méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques
- NF P18-430-13:2014 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
- NF P18-430-13*NF EN 12390-13:2021 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
- NF EN 12390-13:2021 Essais pour béton durci - Partie 13 : détermination du module sécant d'élasticité en compression
- NF EN 1081+A1:2020 Revêtements de sol résilients, stratifiés et multicouches modulaires - Détermination de la résistance électrique
- NF EN 1081/IN1:2020 Revêtements de sol résilients, stratifiés et multicouches modulaires - Détermination de la résistance électrique
- NF EN ISO 10846-5:2009 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 5 : méthode du point d'application pour la détermination de la raideur dynamique de transfert basse fréquence en t...
- NF B51-123:1987 Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.
- NF B51-016:1987 Wood. Static bending. Determination of modulus of elasticity in static bending using small clear specimens.
- NF EN ISO 16581:2019 Revêtements de sol résilients et stratifiés - Détermination de l'effet d'un mouvement simulé d'un pied de meuble
- NF EN ISO 4823:2021 Médecine bucco-dentaire - Produits pour empreintes et matériaux pour enregistrement des rapports intermaxillaires à base d'élastomères
- NF P18-938*NF EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.
- NF B41-210-5*NF EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5 : determination of elastic moduli at elevated temperatures
- NF EN 820-5:2009 Céramiques techniques avancées - Propriétés thermomécaniques des céramiques monolithiques - Partie 5 : détermination des modules élastiques à températures élevées
British Standards Institution (BSI), Medium elastic modulus and elasticity
- BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN ISO 9856:2016 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
- BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compressio
- BS EN 12390-13:2021 Testing hardened concrete. Determination of secant modulus of elasticity in compression
- BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- BS ISO 23711:2022 Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
- 20/30362914 DC BS EN ISO 4823. Dentistry. Elastomeric impression and bite registration materials
- 21/30410891 DC BS ISO 23711. Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
- BS 1881-209:1990 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity
- BS 1881-121:1983 Testing concrete - Method for determination of static modulus of elasticity in compression
- BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
- BS EN 1081:2018+A1:2020 Resilient, laminate and modular multilayer floor coverings. Determination of the electrical resistance
- BS EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- BS EN ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elements other than resilient supports for translatory motion
- BS 2782-3 Methods 320A to 320F:1976 Methods of testing plastics - Mechanical properties - Tensile strength, elongation and elastic modulus
- BS EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures
Indonesia Standards, Medium elastic modulus and elasticity
(U.S.) Ford Automotive Standards, Medium elastic modulus and elasticity
- FORD FLTM BS 105-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
- FORD FLTM BS 105-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
- FORD FLTM EU-BS 005-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS (Replaces FLTM EU-BS 050-01)
- FORD ESB-M2D246-A2-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2D246-A1
- FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM EU-BS 005-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS Replaces FLTM EU-BS 050-01 [Replaced: FORD FLTM EU-BS 050-01]
- FORD WSS-M4D1025-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MOLD-IN-COLOR, MOLDING COMPOUND, EXTERIOR, HIGH IMPACT, MEDIUM-LOW STIFFNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Medium elastic modulus and elasticity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Medium elastic modulus and elasticity
- GB/T 11718.8-1989 Medium density fiberboard--Determination of static bending strength and elastic modulus
- GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
- GB/T 15902-2009 Conveyor belts-Determination of elastic and permanent elongation and calculation of elastic modulus
- GB/T 5986-2000 Test method for modulus of elasticity of thermostat metals
- GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 10700-1989 Test methods for elastic modulus of high performance ceramics
- GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
- GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
- GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
- GB/T 22315-2008 Metallic materials.Determination of modulus of elasticity and Poisson's ratio
- GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 15777-1995 Method for determination of the modulus of elasticity in compressive parallel to grain of wood
- GB/T 1943-1991 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 15902-1995 Conveyor belts--Determination of elastic modulus
- GB/T 5166-1998 Sintered metal materials and hardmetals--Determination of Young's modulus
- GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
- GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
- GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
- GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
- GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
- GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method
- GB/T 43013-2023 Determination of dynamic elastic modulus of chemical fibers by acoustic pulse propagation method
- GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film
- GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
- GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
- GB/T 7897.6-1990 Test methods of mechanical properties of mortar for ferrocement--Test for static modulus of elasticity in compression
- GB/T 15014-1994 Physical characters and physical values terms definitions fo rprocision alloys
- GB/T 28990-2012 Code for non-destructive evaluation of interior decay and modulus of elasticity of historic building wood members by stress wave methods
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
- GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
U.S. Military Regulations and Norms, Medium elastic modulus and elasticity
- ARMY MIL-W-50849 D (5)-1992 WARHEAD, GUIDED MISSILE, HE, M250 INERT PARTS FOR
- ARMY MIL-W-50849 D-1986 WARHEAD, GUIDED MISSILE, HE, M250 INERT PARTS FOR
- ARMY MIL-W-63328 (4)-1988 WARHEAD GM, HE, M248 INERT PARTS FOR
- ARMY MIL-W-63328-1979 WARHEAD GM, HE, M248 INERT PARTS FOR
- ARMY MIL-W-14979 VALID NOTICE 1-1987 WARHEAD, 2.75 INCH ROCKET, XM229 (INERT FILLING OUT) PARTS FOR
- ARMY MIL-W-14979-1968 WARHEAD, 2.75 INCH ROCKET, XM229 (INERT FILLING OUT) PARTS FOR
- ARMY MIL-W-63374 VALID NOTICE 1-1987 WARHEAD, INERT, FOR DEMOLITION KIT, TRAINING, XM270 LOADING ASSEMBLY
- ARMY MIL-W-63374-1981 WARHEAD, INERT, FOR DEMOLITION KIT, TRAINING, XM270 LOADING ASSEMBLY
ES-UNE, Medium elastic modulus and elasticity
- UNE-EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) (Endorsed by AENOR in December of 2016.)
- UNE-EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) (Endorsed by AENOR in April of 2013.)
- UNE-EN ISO 4823:2021 Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021)
- UNE-EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
- UNE-EN 12390-13:2022 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- UNE-EN 1081:2019+A1:2021 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
- UNE-EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.)
未注明发布机构, Medium elastic modulus and elasticity
- DIN EN ISO 9856:2004 Conveyor belts – determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS 1881-209:1990(1998) Testing concrete — Part 209 : Recommendations for the measurement of dynamic modulus of elasticity
- BS EN 1723:2000 Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
- DIN EN 681-2:2003 Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers
- BS 1881-121:1983(1998) Testing concrete — Part 121 : Method for determination of static modulus of elasticity in compression
- DIN EN 1081:2019 Resilient, laminate and modular multi-layer floor coverings – determination of electrical resistance
GM North America, Medium elastic modulus and elasticity
- GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
- GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
- GM GMP.EEBC+ PBT.001-1992 Copolyester Elastomer - 700 MPa Flexural Modulus
- GM GMP.EEBC+PBT.002-2002 Copolyester Elastomer - 850 MPa Flexural Modulus
- GM GMN7302-2001 Copolyester Elastomer - 200MPa Flexural Modulus
- GM GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus
- GM GMP.EEBC.003-2001 Thermoplastic Polyester Elastomer - 73 Type D Hardness, 560 MPa Flexural Modulus
- GM GMP.EEBC.004-2001 Thermoplastic Polyester Elastomer - 47 Type D Hardness, 90 MPa Flexural Modulus
- GM GMP.EEBC.007-2002 Thermoplastic Polyester Elastomer - 62 Type D Hardness, 300 MPa Flexural Modulus
- GM GMP.EEBC.008-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus
- GM GMP.EEBC.012-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 195 MPa Flexural Modulus
- GM GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
- GM GMP.EEBC.014-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 520 MPa Flexural Modulus
- GM GMP.EEBC.015-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus
- GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
- GM GMP.PBT+TEEE.001-2002 Copolyester Elastomer 450 MPa Flexural Modulus, Paintable
- GM GMP.PBT+TEEE.002-2002 Copolyester Elastomer 700 MPa Flexural Modulus, Paintable
- GM GMP.EEBC.002-1994 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus
- GM GMP.EEBC.017-2002 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus, Heat Stabilized
- GM GMP.EEBC.018-2003 Thermoplastic Polyester Elastomer - 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated Modulus, Lubricated
- GM GMP.EEBC.001-2004 Thermoplastic Elastomer - Polyester, Shore D36, 45 MPa Flexural Modulus
- GM GMN6814-2002 Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling
- GM GMP.EEBC.005-2014 Polyester Elastomer - Low Modulus (Issue 2; Do Not Use on New Programs; Replaced by GMW17187)
- GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
- GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
- GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
- GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
SE-SIS, Medium elastic modulus and elasticity
- SIS 20 03 11
- SIS SS 13 72 32-1983 Concrete testing - Hardened concrete - Modulus of elasticity in ompression
- SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression
- SIS SS 16 22 13-1986 Rubber and thermoplastic elastomer - Evaluation of corrosion of steel in wet atmosphere
- SIS SS 11 21 39-1987 Aliuminium and steel - Stranded con- uctors for overhead lines - Tensile esting for the determination of the odulus of elasticity
- SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity
CZ-CSN, Medium elastic modulus and elasticity
- CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
- CSN 73 1360-1976 Determination of modulus of elasticity of cellular concrete
- CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
- CSN 73 1319-1968 Determination of modulus o? elasticity and deformability of concrete
- CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
- CSN ISO 6784:1993 Concrete-Determination of static modulus of elasticity in compression
- CSN 73 6174-1994
- CSN 79 3819-1977 ting of leatliers. Apparent modulus iíiision elasticity, tensilc stiffncss I agreement modulus of leathers
- CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
- CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
- CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension
- CSN 80 0266-1969 Determination of non-stretch fibre content of polyester fibres by indi- cating dye
TR-TSE, Medium elastic modulus and elasticity
- TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING
- TS 2030-1975 DETERMINATION OF ELASTIC MODULI AND POISSON'S RATIO OF ROCKS ?N UNIAXIAL COMPRESSION
- TS 3502-1981 TEST METHOD FOR STATIC MODULUS OF ELASTICITY AND POISSON'S RATIC OF CONCRETE IN COMPRESSION
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Medium elastic modulus and elasticity
- GB/T 15902-2017 Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
- GB/T 15777-2017 Method for determination of the modulus of elasticity in compression parallel to grain of wood
- GB/T 34367-2017 Light conveyor belts—Determination of the relaxed elastic modulus
GM Daewoo, Medium elastic modulus and elasticity
- GMKOREA EDS-T-7432-2012 Determination of Pressure Modulus and Loss Angle of Elastomers ???? ?? ???, ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14738. [Replaced: GMKOREA
- GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)
AT-ON, Medium elastic modulus and elasticity
- ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- OENORM EN ISO 4823:2021 Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021)
- OENORM EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- OENORM EN 1081-2020 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
Lithuanian Standards Office , Medium elastic modulus and elasticity
- LST EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
- LST EN ISO 9856:2004/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd.1:2012)
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
- LST EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)
- LST EN ISO 4823:2021 Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021)
- LST EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- LST EN 1081+A1-2020 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
- LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- LST EN 820-5-2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
RO-ASRO, Medium elastic modulus and elasticity
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending
- STAS 9994-1975 WOOD Determination of modulus of elasticity by the dynamic method
- STAS 10574-1976 WOOD Detorminalion of the modulus of elasticity in shear by the dynamic method
- STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
- STAS 4613-1972 Eleetrie eables ELASTOMERE INSULATION AND SHEATII Teehnical requirements for qualily
- STAS 7459/3-1990 Elastomers. Raw styrene-butadiene rubber. Determination of organic acids and soap
- SR 3589-5-1994 Indicating pressure gauges, vacuum gauges and pressure vacuum gauges with elastic element. Elastic elements for overpressure measuring, choosing criteria
American Society for Testing and Materials (ASTM), Medium elastic modulus and elasticity
- ASTM E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
- ASTM E111-97 Standard Test Method for Young''s Modulus, Tangent Modulus, and Chord Modulus
- ASTM D5858-96(2003) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
- ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C469-94 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-94e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C534-07a Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM C534-07 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM C534-07e1 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM C469/C469M-14e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM C469/C469M-22 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM E3003-15 Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
- ASTM B223-97 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-03 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08(2013) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
- ASTM D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM D6835-08(2014) Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials 40;TEEE41;
- ASTM D5858-96e1 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2020) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM C469/C469M-14 Standard Test Method for Static Modulus of Elasticity and Poissonrsquo;s Ratio of Concrete in Compression
- ASTM C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
- ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM D926-98 Standard Test Method for Rubber Property-Plasticity and Recovery (Parallel Plate Method)
- ASTM D926-17(2022) Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
- ASTM D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
- ASTM D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM C1523-02 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
- ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-05e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM E3004-15 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
- ASTM C1523-02a Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM D926-02 Standard Test Method for Rubber Property8212;Plasticity and Recovery (Parallel Plate Method)
- ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
国家市场监督管理总局、中国国家标准化管理委员会, Medium elastic modulus and elasticity
- GB/T 37788-2019 Test method for elastic moduli of ultra-thin glass
- GB/T 37780-2019 Test method for elastic modulus，shear modulus and Poisson's ratio of glass
- GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
- GB/T 39828-2021 Test method for determining elastic modulus of thick ceramic coating at elevated temperature
- GB/T 39686-2020 Test method for determining elastic modulus and strength of thick ceramic coatings
- GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
- GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
- GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method
- GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
- GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
Korean Agency for Technology and Standards (KATS), Medium elastic modulus and elasticity
- KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
- KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
- KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
- KS F 2437-2013 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-2008 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-1982 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS D ISO 12076:2006 Steel wire ropes-Determination of the actual modulus of elasticity
- KS D ISO 12076:2013 Steel wire ropes－Determination of the actual modulus of elasticity
- KS L 1598-2009 Testing method for elastic modulus of high performance ceramics at elevated temperature
- KS I ISO 10846-4:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
- KS F 2438-2002 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-1982 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-2017 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-2017(2022) Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
Professional Standard - Aviation, Medium elastic modulus and elasticity
- HB 5212-1982 Test method for high temperature modulus of elasticity of metals
- HB 5367.11-1986 Test method for modulus of elasticity of carbon graphite sealing materials
Professional Standard - Water Conservancy, Medium elastic modulus and elasticity
- SL 237-029-1999 Code for test of soil - elastic modulus test
- SL 135-2017 Calibration method of concrete dynamic elastic modulus tester
RU-GOST R, Medium elastic modulus and elasticity
- GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
- GOST R 50236-1992 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 210-1975 Rubber. Method for the determination of elasticity modulus at extension
- GOST ISO 21181-2018 Light conveyor belts. Determination of the relaxed elastic modulus
- GOST 25095-1982 Sintered hardmetals. Method of determination of elastic modulus (of Young's modulus)
- GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
- GOST 26454-1985 Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond
- GOST 18336-2017 Rigid cellular plastics. Method of test for compressive modulus of elasticity
- GOST 16483.26-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST 16483.27-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST 16483.31-1974 Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations
- GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
- GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
- GOST 23404-1986 Lightweight enclosure panels with foam plastic thermal insulation. Method of determining modulus of elasticity and shear modulus of foam plastic
- GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
- GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction
- GOST EN 1849-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of thickness and mass per unit area
- GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
- GOST 24452-1980 Concretes. Methods of prismatic compressive strength, modulus of elasticity and Poisson's ratio determination
- GOST 32108-2013 Mechanical vibration. Measurement of vibration transferred into resilient isolators. High-speed and medium-speed reciprocating internal combustion engines
Professional Standard - Machinery, Medium elastic modulus and elasticity
- JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method
ZA-SANS, Medium elastic modulus and elasticity
- SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes
- SANS 6015:2004 Modulus of elasticity and modulus of rupture in static bending of fibreboards
Professional Standard - Building Materials, Medium elastic modulus and elasticity
- JC/T 678-1997 Test method for Young's modulus,shear modulus and Poisson's ratio of glass material
- JC/T 2172-2013 Aluminium titanate ceramic pipe for aluminium-melt feeding
TH-TISI, Medium elastic modulus and elasticity
- TIS 1744-1999 Concrete.determination of static modulus of elasticity in compression
American National Standards Institute （ANSI), Medium elastic modulus and elasticity
- ANSI S2.24-2001 Graphical Presentation of the Complex Modulus of Viscoelastic Materials
- ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
Professional Standard - Chemical Industry, Medium elastic modulus and elasticity
Japanese Industrial Standards Committee (JISC), Medium elastic modulus and elasticity
- JIS R 1602:1995 Testing methods for elastic modulus of fine ceramics
- JIS A 1149:2001 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2010 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2017 Method of test for static modulus of elasticity of concrete
- JIS A 1149 AMD 1:2022 Method of test for static modulus of elasticity of concrete (Amendment 1)
- JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
- JIS A 1127:2001 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
- JIS A 1127:2010 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
- JIS R 1644:2002 Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites
Shandong Provincial Standard of the People's Republic of China, Medium elastic modulus and elasticity
- DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber
Standard Association of Australia （SAA）, Medium elastic modulus and elasticity
工业和信息化部, Medium elastic modulus and elasticity
- WJ/T 852-2014 Typical combination of cold punching die, middle guide pillar elastic pressure discharge die (rigid)
- WJ/T 851-2014 Typical combination of cold punching die, middle guide pillar elastic pressure discharge die (flexible)
- WJ/T 856-2014 Typical combination of cold punching die, middle guide column, circular elastic pressure discharge die (rigid)
- WJ/T 855-2014 Typical combination of cold punching die, middle guide column, circular elastic discharge die (flexible)
- JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
YU-JUS, Medium elastic modulus and elasticity
- JUS U.M1.025-1982 Concrete. Determination of static modulus of elasticity in compression
- JUS B.F8.159-1987 Noncombustible mineral boards. Determination of.modulus ofelasticity in bending
- JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
- JUS U.J6.226-1982 Teso'ng of cellular plastics; determination of the dynamic modulus ofelasticity and the loss factor
- JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
- JUS U.M1.026-1992 Concrete - Determination of the dinamic modulus of elasticity and poisson's ratio
- JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
CEN - European Committee for Standardization, Medium elastic modulus and elasticity
- EN ISO 21181:2006 Light conveyor belts - Determination of the relaxed elastic modulus
NL-NEN, Medium elastic modulus and elasticity
- NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
AENOR, Medium elastic modulus and elasticity
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
- UNE 53630:2010 Rubber. Determination of elasticity modulus shears. Quadruple-shear method.
- UNE 36745:2004 Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
- UNE 22950-3:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 3: MODULES OF ELASTICITY (YOUNG) AND POISSON'S RATIO DETERMINATION.
- UNE-EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- UNE 53535:2008 Elastomers. Rubber products in automotive applications. Characteristics and designation.
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
American Gear Manufacturers Association, Medium elastic modulus and elasticity
AGMA - American Gear Manufacturers Association, Medium elastic modulus and elasticity
- 9004-A99-1999 Flexible Couplings - Mass Elastic Properties and Other Characteristics
- 9004A-A99-1999 Flexible Couplings - Mass Elastic Properties and Other Characteristics
- 9004-B08-2008 Flexible Couplings - Mass Elastic Properties and Other Characteristics
- 9104-A06-2006 Flexible Couplings - Mass Elastic Properties and Other Characteristics (Metric Edition)
水利部, Medium elastic modulus and elasticity
- SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument
Professional Standard - China Metal Association, Medium elastic modulus and elasticity
- CSM 01 01 02 03-2006 Uncertainty Evaluation of Measurement Result of Elastic Modulus of Steel Strand
IT-UNI, Medium elastic modulus and elasticity
NO-SN, Medium elastic modulus and elasticity
- NS 3676-1987 Concrete testing - Hardened concrete - Modules of elasticity in compression
PL-PKN, Medium elastic modulus and elasticity
- PN M42321-1987 Industrial pressure gauges ith elastic elements easuring elastic lements e?uirements and tests
- PN-EN ISO 4823-2021-08 E Dentistry -- Elastomeric impression and bite registration materials (ISO 4823:2021)
- PN-EN 1081+A1-2021-02 E Resilient, laminate and modular multilayer floor coverings--Determination of the electrical resistance
KR-KS, Medium elastic modulus and elasticity
- KS P ISO 4823-2022 Dentistry — Elastomeric impression and bite registration materials
- KS I ISO 10846-4-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
Professional Standard - Ferrous Metallurgy, Medium elastic modulus and elasticity
- YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method
Professional Standard - Forestry, Medium elastic modulus and elasticity
- LY/T 2382-2014 Standard test method for nondestructive evaluation of lumber using stress wave
The American Road & Transportation Builders Association, Medium elastic modulus and elasticity
- AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO DIVISION I 8.7 Modulus of Elasticity and Poisson's Ratio(Standard Specifications for Highway Bridges, Div. 1 - Design)
- AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition
Professional Standard - Textile, Medium elastic modulus and elasticity
- FZ/T 50009.4-2019 Test method for bulkiness and elasticity of hollow polyester staple fiber
- FZ/T 50009.4-2007 Testing method for bulkiness performance of hollow polyester staple fibres
UY-UNIT, Medium elastic modulus and elasticity
SG-SPRING SG, Medium elastic modulus and elasticity
- SS 78 Pt.B9-1992 Testing Concrete Part B9 : Recommendations For The Measurement Of Dynamic Modulus Of Elasticity
- SS 78 Pt.A21-1987 Testing Concrete Part A21 : Method For Determination Of Static Modulus Of Elasticity In Compression
BE-NBN, Medium elastic modulus and elasticity
IN-BIS, Medium elastic modulus and elasticity
IX-SA, Medium elastic modulus and elasticity
HU-MSZT, Medium elastic modulus and elasticity
GM Europe, Medium elastic modulus and elasticity
- GME L-9A-18-2000 Determination of Radial Elasticity of Universal Joints and Intermediate Spindels
CH-SNV, Medium elastic modulus and elasticity
- SN EN ISO 4823:2021 Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021)
Professional Standard - Electron, Medium elastic modulus and elasticity
- SJ 2317-1983 Test methods for elasticity modulus and loss factor of paper stock for loudspeakers
VN-TCVN, Medium elastic modulus and elasticity
- TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
- TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
Society of Automotive Engineers (SAE), Medium elastic modulus and elasticity
- SAE AMS2817G-2022 Packaging and Identification of Molded Elastomeric Seals and Sealing Components
- SAE AMS-R-81828-2001 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
- SAE AMS-R-81828A-2011 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
GB-REG, Medium elastic modulus and elasticity
- REG NACA-TN-2566-1951 A Study of Elastic and Plastic Stress Concentration Factors Due to Notches and Fillets in Flat Plates
- REG NACA-TR-1117-1953 A Study of Elastic and Plastic Stress Concentration Factors Due to Notches and Fillets in Flat Plates
PT-IPQ, Medium elastic modulus and elasticity
- NP EN 1399-1998 Resilient floor coverings Determination of resistance to stubbed and burning cigarettes
- NP EN 1399-1-2001 Resilient floor coverings Determination of resistance to stubbed and burning cigarettes
Professional Standard - Non-ferrous Metal, Medium elastic modulus and elasticity
- YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
ESDU - Engineering Sciences Data Unit, Medium elastic modulus and elasticity
- ESDU 89048-1989 Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
- ESDU 80027 C-1995 Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
US-FCR, Medium elastic modulus and elasticity
- FCR COE CRD-C 166-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR STATIC MODULUS OF ELASTICITY OF CONCRETE IN TENSION
U.S. Air Force, Medium elastic modulus and elasticity
BELST, Medium elastic modulus and elasticity
- STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs
GOSTR, Medium elastic modulus and elasticity
- GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus