ZH
RU
ES

Within-group and between-group tests

Within-group and between-group tests, Total:495 items.

In the international standard classification, Within-group and between-group tests involves: Electrical engineering in general, Hand-held tools, Protection against fire, Pipeline components and pipelines, Components for electrical equipment, Electrical and electronic testing, Space systems and operations, Gears, Environmental testing, Electrical accessories, Solar energy engineering, Railway rolling stock, Tyres, Paper and board, Rotating machinery, Agricultural machines, implements and equipment, Continuous handling equipment, Elements of buildings, Radiocommunications, Optical equipment, Protection of and in buildings, Water quality, Fluid storage devices, Test conditions and procedures in general, Rubber and plastics products, Internal combustion engines, Fluid power systems, Quality, Printed circuits and boards, Power stations in general, Fibre optic communications, Installations in buildings, Electrical wires and cables, Aerospace fluid systems and components, Refrigerating technology, Freight distribution of goods, Switchgear and controlgear, Medical equipment, Aids for disabled or handicapped persons, Products of the chemical industry, Aerospace engines and propulsion systems, Testing of metals, Surface treatment and coating, Shipbuilding and marine structures in general, Wind turbine systems and other alternative sources of energy, Industrial automation systems, Equipment for petroleum and natural gas industries, Aerospace electric equipment and systems, Electric traction equipment, Glass, Home economics in general, Gas and steam turbines. Steam engines, Wastes, Hydraulic energy engineering, Iron and steel products, Materials for aerospace construction, Structures of buildings, Telecommunication systems, Integrated circuits. Microelectronics, Ferrous metals, Products of non-ferrous metals, Vocabularies, Machine tools, Components and accessories for telecommunications equipment, Construction equipment, Electromechanical components for electronic and telecommunications equipment, Adhesives, Non-destructive testing, Footwear, Thermodynamics and temperature measurements, Kitchen equipment, Headgear. Clothing accessories. Fastening of clothing, Electronic components in general, Vibrations, shock and vibration measurements, Cargo equipment, Road vehicle systems, Measurement of time, velocity, acceleration, angular velocity, Bearings, Welding, brazing and soldering, Mechanical testing, Valves.


Professional Standard - Aerospace, Within-group and between-group tests

  • QJ 2630.4-1996 Space encironment test methods for satellite components.Megnetic test
  • QJ 2630.1-1994 Space environment test method for satellite components Thermal vacuum test
  • QJ 2630.2-1994 Satellite component space environment test method heat balance test
  • QJ 2630.3-1994 Space environment test method for satellite components Vacuum discharge test
  • QJ 2630.5-1998 Space environment test method for satellite components Vacuum cold welding test

Professional Standard - Machinery, Within-group and between-group tests

  • JB/T 7080-1993 Testing instrument for winding inter-turn impulse voltage
  • JB/T 7080-2013 Impulse voltage tester for winding interturn insulation
  • JB/T 9617-1999 Test specification of the interture insulation on armature winding for DC machines
  • JB/T 9615.1-2000 Test methods of the interturn insulation on random wound winding for AC low-voltage machines
  • JB/T 9615.2-2000 Test Limits of the interturn insulation on random wound winding for AC low-voltage machines
  • JB/T 5810-2007 Test specifications of interturn insulation of field pole coil and field winding for electrical machines
  • JB/T 5810-1991 Specification for inter-turn insulation test of motor pole coil and field winding
  • JB/T 11876-2014 Reciprocating internal combustion engines.Cylinder liner-piston-ring assemblies.Scoring test methods
  • JB/T 9818.2-1999 Test methods for combined husker and whitener united rice mill
  • JB/T 7323-1994 Test methods for wind turbines
  • JB/T 5811-2007 Test method and limits of form-wound winding for alternating current low-voltage electrical machines
  • JB/T 5811-1991 Test method and limits of inter-turn insulation of formed windings of AC low-voltage motors
  • JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
  • JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
  • JB/T 7315-1994 Test method for compound feed processing unit
  • JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
  • JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
  • JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester

American Society for Testing and Materials (ASTM), Within-group and between-group tests

  • ASTM E2257-17 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E2257-22 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E1597-10(2015) Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
  • ASTM F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
  • ASTM F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
  • ASTM F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
  • ASTM E2010-99 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
  • ASTM E2074-00 Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
  • ASTM E2481-12(2018) Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
  • ASTM D6689-01(2006) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
  • ASTM D6689-01 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
  • ASTM E2189-02 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
  • ASTM E2189-19 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
  • ASTM E2481-12(2023) Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
  • ASTM E73-83(2007) Standard Practice for Static Load Testing of Truss Assemblies
  • ASTM E1597-05 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
  • ASTM E2257-03 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E2257-13a Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E2257-16 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E1111/E1111M-14(2022) Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
  • ASTM E2010-01 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (Withdrawn 2007)
  • ASTM F1639-95 Standard Test Method for Performance of Combination Ovens
  • ASTM E163-80 Standard Methods of Fire Tests Of Window Assemblies
  • ASTM F1639-95(2001) Standard Test Method for Performance of Combination Ovens
  • ASTM E73-83(1996)e1 Standard Practice for Static Load Testing of Truss Assemblies
  • ASTM E2257-08 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

American National Standards Institute （ANSI), Within-group and between-group tests

Korean Agency for Technology and Standards (KATS), Within-group and between-group tests

  • KS C 3003-1998 Methods of test for fiber or paper insulated copper and aluminum winding wires
  • KS C 3003-1982 Methods of test for fiber or paper insulated copper and aluminum winding wires
  • KS M ISO 12625-8:2020 Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
  • KS M ISO 12625-8:2014 Tissue paper and tissue products — Part 8 : Water-absorption time and water-absorption capacity, basket-immersion test method
  • KS F 2268-1-2014(2020) Fire resistance test for door assemblies
  • KS C 0233-2001(2016) Environmental testing Part 2：Tests－ Test Z/AM：Combines cold/low air pressure tests
  • KS C 0234-2001(2016) Environmental testing Part 2：Tests－ Test Z/BM：Combined dry heat/low air pressure tests
  • KS F 2268-1-2021 Fire resistance test for door assemblies
  • KS C IEC 61189-5-2009(2020) Test methods for electrical materials, interconnection structures and assemblies－Part 5：Test methods for printed board assemblies
  • KS C IEC 60068-2-38:2014 Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
  • KS C IEC 60068-2-53-2017(2022) Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
  • KS C IEC 60068-2-82:2021 Environmental testing — Part 2-82: Tests — Test Xw1: Whisker test methods for components and parts used in electronic assemblies
  • KS D 0210-1992 MacroStructure Detecting Method for Steel
  • KS C IEC 61701:2005 Salt mist corrosion testing of photovoltaic(PV) modules
  • KS V 0820-2001(2011) Fire resistance of hose assemblies－Test methods
  • KS C IEC 61701:2014 Salt mist corrosion testing of photovoltaic(PV) modules
  • KS V ISO 15540-2006(2016) Fire resistance of hose assemblies－Test methods
  • KS C IEC 60439-1:2003 Low-voltage switchgear and controlgear assemblies－Part 1：Type-tested and partially type-tested assemblies
  • KS M ISO 8032:2009 Rubber and plastics hose assemblies－Flexing combined with hydraulic impulse test(half-omega test)
  • KS M ISO 8032-2009(2019) Rubber and plastics hose assemblies－Flexing combined with hydraulic impulse test(half-omega test)
  • KS B 8913-2017 Combined heat and power unit using internal gas combustion engines for building — Performance test methods
  • KS C IEC 61189-5:2009 Test methods for electrical materials, interconnection structures and assemblies－Part 5：Test methods for printed board assemblies
  • KS B ISO 9022-18-2002(2022) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
  • KS B ISO 9022-18-2002(2017) Optics and optical instruments－Environmental test methods－Part 18：Combined damp heat and low internal pressure
  • KS C IEC 61189-2:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies－Part 2：Test methods for materials for interconnection structures
  • KS C IEC 62716:2014 Photovoltaic(PV) modules — Ammonia corrosion testing
  • KS V ISO 15540:2006 Fire resistance of hose assemblies－Test methods
  • KS B ISO 8956:2004 Acceptance conditions for copying attachments, integral or otherwise, for lathes-Testing of the accuracy
  • KS B ISO 8956:2013 Acceptance conditions for copying attachments, integral or otherwise, for lathes－Testing of the accuracy
  • KS C IEC 61189-6-2009(2020) Test methods for electrical materials, interconnection structures and assemblies－Part 6：Test methods for materials used in manufacturing electronic assemblies
  • KS M ISO 1402-2012(2022) Rubber and plastics hoses and hose assemblies－Hydrostatic testing
  • KS B ISO 3452-3:2006 Non-destructive testing-Penetrant testing-Part 3:Reference test blocks
  • KS B ISO 6605-2004(2009) Hydraulic fluid power－Hoses and hose assemblies－Test methods
  • KS C IEC 62790-2016(2021) Junction boxes for photovoltaic modules ― Safety requirements and tests
  • KS V 4314-1994 Shop test code of marine internal combustion engines for propelling use
  • KS V ISO 15540-2006(2021) Fire resistance of hose assemblies－Test methods
  • KS C IEC 61189-6:2009 Test methods for electrical materials, interconnection structures and assemblies-Part 6:Test methods for materials used in manufacturing electronic assemblies
  • KS C IEC 60068-2-53:2010 Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
  • KS C IEC 60068-2-53:2017 Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
  • KS B ISO 15848-2-2004(2014) Industrial valves－Measurement, test and qualification procedures for fugitive emissions－Part 2：Production acceptance test

Taiwan Provincial Standard of the People's Republic of China, Within-group and between-group tests

  • CNS 11239-1985 Endurance (Electrical) Testing Method for Electronic Component
  • CNS 10924-1984 Method of Test for Fiber Optic Devices (Tensile Proof Test)
  • CNS 10925-1984 Method of Test for Fiber Optic Devices (Fluid Immersion Test)
  • CNS 10930-1984 Method of Test for Fiber Optic Devices (Dust (Fine Sand) Test)
  • CNS 11333-1985 Method of Test for Fiber Optic Devices (Fiber Optic Cable Fluid Immersion Test)
  • CNS 10878-1984 Method of Test for Fiber Optic Devices (Impact Testing of Cable Assemblies)
  • CNS 3626-1985 Voltage Endurance Testing Method for Electronic Components
  • CNS 7640-1981 1
  • CNS 12566-1993 Basic Environmental Testing Procedures Part 2: Tests, Test Z/AD:Composite Temperature/Humidity Cyclic Test
  • CNS 10929-1984 Method of Test for Fiber Optic Devices (Circuit Discontinuities Test)
  • CNS 10876-1984 Method of Test for Fiber Optic Devices (Vibration Test)
  • CNS 3635-1985 Insulation Resistance Testing Method for Electronic Components
  • CNS 11237-1985 Sealing (Immersion Cyclic) Testing Method for Electronic Components
  • CNS 11704-1986 Method of Test for Fiber Optic Devices (FOTP-15 Altitude Immersion Test)
  • CNS 10931-1984 Method of Test for Fiber Optic Devices (Cable Wicking Test)
  • CNS 2514-1990 Method of Test for Fiber Composition of Pulp and Paper
  • CNS 7137-1997 Sine-vibration testing method for automobile parts
  • CNS 14129-1998 Method of random vibration test for vehicle parts
  • CNS 8264-1982 Vibration Test Methods for Parts of Railway Rolling Stock
  • CNS 8265-1982 Shock Test Methods for Parts of Railway Rolling Stock
  • CNS 10877-1984 Method of Test for Fiber Optic Devices (Maintenance Aging)
  • CNS 7639-1981 Method of Test for Fiber Optic Devices Humidity Test Procedure for Fiber Optic Connecting Devices

International Organization for Standardization (ISO), Within-group and between-group tests

  • ISO 5879:2023 Space systems — Ground test for the separation between a launch vehicle and a spacecraft — Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
  • ISO 3008:1976 Fire-resistance tests; Door and shutter assemblies
  • ISO/FDIS 5879 Space systems — Launch vehicle/spacecraft separation ground test requirements for combined separation test, horizontal separation test and individual falling separation test
  • ISO 16964:2015 Gas cylinders — Flexible hoses assemblies — Specification and testing
  • ISO 8528-8:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
  • ISO 8528-8:1995 Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
  • ISO 22675:2006 Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods
  • ISO 22675:2016 Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods
  • ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods
  • ISO 8528-6:1993 Reciprocating internal combustion engine driven alternating current generating sets; part 6: test methods
  • ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
  • ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing
  • ISO 3008:1976/Amd 1:1984 Amendment 1-1984
  • ISO 8032:1987 Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (Half omega test)
  • ISO 10961:2019 Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection
  • ISO 7894:1987 Partitions made of components — Test for resistance to wind (static pressure and slamming doors)
  • ISO 11339:1993 Adhesives; 180° peel test for flexible-to-flexible bonded assemblies (T-peel test)
  • ISO 9815:1992 Passenger car/trailer combinations; lateral stability test
  • ISO 12097-2:1996 Road vehicles - Airbag components - Part 2: Testing of airbag modules
  • ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
  • ISO 10354:1992 Adhesives; caracterization of durability of structural-adhesive-bonded assemblies; wedge rupture test
  • ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests

RU-GOST R, Within-group and between-group tests

GM North America, Within-group and between-group tests

Standard Association of Australia （SAA）, Within-group and between-group tests

  • AS 60068.2.39:2003 Environmental testing - Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
  • AS 60068.2.41:2003 Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests
  • AS 60068.2.38:2003 Environmental testing - Tests - Test Z/AD: Composite temperature/humidity cyclic test
  • AS 60068.2.50:2003 Environmental testing - Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • AS 3439.1:1993 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies
  • AS 1530.7:2007 Methods for fire tests on building materials, components and structures - Smoke control assemblies - Ambient and medium temperature leakage test procedure
  • AS/NZS 1462.8:2008 Methods of test for plastics pipes and fittings - Method of testing the leaktightness of assemblies
  • AS 2582.16:2006 Complete, filled transport packages - Methods of test - Stability testing of unit loads

U.S. Air Force, Within-group and between-group tests

Association Francaise de Normalisation, Within-group and between-group tests

  • NF EN ISO 3503:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne de montages soumis à une courbure
  • NF T47-101*NF EN ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test method
  • NF T47-101:1988 CONVEYOR BELTS. PLY ADHESION BETWEEN CONSTITUTIVE ELEMENTS. TEST METHODS AND REQUIREMENTS.
  • NF E29-666:2014 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing
  • NF X50-142:1990 SUPPLIER-USER RELATIONS. TESTS QUALITY. GUIDELINES FOR REQUESTING AND ORGANIZING TESTS.
  • NF C20-738*NF EN 60068-2-38:2010 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test.
  • NF C20-738*NF EN IEC 60068-2-38:2021 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test
  • NF C63-421:1994 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1 : TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES. (EUROPEAN STANDARD EN 60 439-1).
  • NF E48-088:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).
  • NF E37-306*NF ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 6 : test methods
  • NF C20-753*NF EN 60068-2-53:2010 Environmental testing - Part 2-53 : tests and guidance : combined climatic (temperature/humidity) and dynamic (vibration/shock) tests.
  • NF EN ISO 10961:2019 Bouteilles à gaz - Cadres de bouteilles - Conception, fabrication, essais et inspection
  • FD X33-044*FD CEN/TR 15175:2006 Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges
  • NF E37-308*NF ISO 8528-8:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 8 : requirements and tests for low-power generating sets
  • NF ISO 8528-8:2016 Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne - Partie 8 : prescriptions et essais pour groupes électrogènes de faible puissance
  • NF EN ISO 9018:2015 Essais destructifs des soudures sur matériaux métalliques - Essai de traction des assemblages en croix et à recouvrement
  • NF D36-402:2000 Building valves - Expansion groups - Tests and requirements.
  • NF E29-734:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection.
  • NF D36-402*NF EN 1488:2021 Building valves - Expansion groups - Tests and requirements
  • XP E01-201-8-2016 Pressure equipment and assemblies - Part 8 : proof test
  • XP E01-201-8*XP CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8 : proof test
  • NF C93-735-3*NF EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3 : general test methods for materials and assemblies - Soldering paste for printed board assemblies
  • NF L59-716*NF EN 3909:2016 Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies
  • NF C93-736*NF EN 61189-6:2008 Test methods for electrical materials, interconnection structures and assemblies - Part 6 : test methods for materials used in manufacturing electronic assemblies

U.S. Military Regulations and Norms, Within-group and between-group tests

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Within-group and between-group tests

  • GB/T 3315-1982 Rules for inspecting and testing of diesel locomotives after completion of construction
  • GB 3315-1982 Rules for the inspecting and testing of diesel locomotives after completion of construction
  • GB/T 22716-2008 Test specifications of interturn insulation of armature winding for DC electrical machines
  • GB/T 24643-2009 Fuel consumption of tractor set during field operation.Test methods
  • GB/T 22714-2008 Test specifications of interturn insulation of form-wound winding for AC low-voltage eletrical machines
  • GB/T 19394-2003 UV test for Photovoltai (PV) modules
  • GB/T 43058-2023 Photovoltaic module ammonia corrosion test
  • GB/T 2423.34-2012 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test
  • GB/T 22717-2008 Test specifications of interturn insulation of field pole coil and field winding for electrical machines
  • GB/T 18912-2002 Salt mist corrosion testing of photovoltaic(PV) modules
  • GB/T 16750.3-1997 The test method for electrical submersible pump units
  • GB/T 25117.3-2010 Railway applications.Rolling stock.Combined testing.Part 3:Combined testing of alternating current motors,fed by an indirect converter,and their control system
  • GB/T 4074.7-2009 Winding wires.Test methods.Part 7::Test procedure for the determination of the temperature index of enamelled winding wires
  • GB/T 12722-2008 Rubber and plastics hose assemblies.Flexing combined with hydraulic impulse test (half-omega test)
  • GB/T 12722-1991 Rubber and plastics hose assemblies--Flexing combined with hydraulic impulse test (Half omega test)
  • GB/T 30555-2014 Rules for screw expander (unit) thermal acceptance test
  • GB/T 14999.4-1994 Methods of examining micro-structures for heat-resisting superalloys
  • GB/T 2820.8-2002 Reciprocating internal combustion engine driven alternating current generating sets--Part 8: Requirements and tests for low-power generating sets
  • GB/T 2820.8-2022 Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets
  • GB/T 2820.11-2012 Reciprocating internal combustion engine driven alternating current generating sets.Part 11:Rotary uninterruptible power systems.Performance requirements and test methods
  • GB/T 22719.1-2008 Interturn insulation of random-wound winding for AC low-voltage electrical machines.Part 1:Test methods
  • GB/T 22719.2-2008 Interturn insulation of random-wound winding for AC low-voltage electrical machines.Part 2:Test limits
  • GB/T 4074.8-2009 Winding wires.Test methods.Part 8:Test procedure for the determination of the temperature index of enamelled winding wires.Quick-Test method
  • GB/T 2423.34-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AD:Composite temperature/humidity cyclic test
  • GB/T 3903.8-2022 Footwear—Test methods for insoles—Delamination resistance
  • GB/T 3903.8-2005 Footwear-Test method for insoles Delamination resistance
  • GB/T 18451.2-2003 Wind turbine generator systems wind turbine power performance testing
  • GB/T 43057-2023 Dynamic mechanical load test of photovoltaic modules

Construction department of Hebei province, Within-group and between-group tests

  • DB13(J) 71-2007 Static load test combined pull anchor inner support technical specification

KR-KS, Within-group and between-group tests

  • KS M ISO 14960-1-2016 Tubeless tyres ─ Valves and components ─ Part 1: Test methods
  • KS M ISO 12625-8-2020 Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
  • KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
  • KS C IEC 60068-2-82-2021 Environmental testing — Part 2-82: Tests — Test Xw1: Whisker test methods for components and parts used in electronic assemblies
  • KS C IEC 60068-2-53-2017 Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
  • KS B 4227-2008(2023) Performance test method of modular jig and fixture
  • KS C IEC 62790-2016 Junction boxes for photovoltaic modules ― Safety requirements and tests
  • KS C IEC 61189-5-3-2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies — Part 5-3: General test methods for materials and assemblies — Soldering paste for printed bo
  • KS B 6359-2008(2023) Testing method for mechanical transport refrigeration units
  • KS B ISO 21250-1-2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
  • KS C IEC 61189-5-2-2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies — Part 5-2: General test methods for materials and assemblies — Soldering flux for printed boa

Danish Standards Foundation, Within-group and between-group tests

  • DS/EN ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test methods
  • DS/EN ISO 10961:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection
  • DS 1051.2:1980 Fire-resistance tests. Door and shutter assemblies
  • DS/EN 61189-5:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies
  • DS/EN 3909:2008 Aerospace series - Test fluids and test methods for electric components and sub-assemblies
  • DS/ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
  • DS/CEN/TR 15175:2006 Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges
  • DS/ISO 8528-8:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
  • DS/EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
  • DS/EN IEC 61189-5-502:2021 Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 5-502: General test methods for materials and assemblies – Surface insulation resistance (SIR) testing of assemblies
  • DS/EN 61189-6:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies

国家机械工业局, Within-group and between-group tests

  • JB/T 9697-1999 Specification for interturn insulation test of DC motor armature windings

Underwriters Laboratories (UL), Within-group and between-group tests

  • UL 10B-1993 Fire tests of door assemblies
  • UL 10B-2008 UL Standard for Safety Fire Tests of Door Assemblies Tenth Edition
  • UL 580-2006 UL Standard for Safety Tests for Uplift Resistance of Roof Assemblies Fifth Edition

German Institute for Standardization, Within-group and between-group tests

  • DIN ISO 9022-18:2001 Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure (ISO 9022-18:1994)
  • DIN 38402-41:1984 German standard methods for the examination of water, waste water and sludge; general information (group A); inter-laboratory tests; planning and organization (A 41)
  • DIN EN 60068-2-41:2000 Environmental testing - Part 2: Tests; test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983); German version EN 60068-2-41:1999
  • DIN EN 60068-2-39:2000 Environmental testing - Part 2: Tests; test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976); German version EN 60068-2-39:1999
  • DIN EN ISO 252:2008 Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2007); English version of DIN EN ISO 252:2008-01
  • DIN EN 60439-1 Bb.2:2009 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies - Guide for testing under conditions of arcing due to an internal fault (IEC/TR 61641:2008)
  • DIN EN IEC 60068-2-82:2020 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies (IEC 60068-2-82:2019); German version EN IEC 60068-2-82:2019
  • DIN 6280-10:1986 Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
  • DIN EN ISO 10961:2020-03 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019); German version EN ISO 10961:2019
  • DIN EN 61189-5:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies (IEC 61189-5:2006); German version EN 61189-5:2006
  • DIN EN 61189-5-601:2018 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test for
  • DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
  • DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
  • DIN EN IEC 61189-5-601:2022-12 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test ...
  • DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
  • DIN EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
  • DIN CEN/TS 764-8:2016-11*DIN SPEC 2930:2016-11 Pressure equipment and assemblies - Part 8: Proof test; German version CEN/TS 764-8:2016
  • DIN 38402-42:2005 German standard methods for the examination of water, waste water and sludge - General informations (group A) - Part 42: Interlaboratory trials for method validation, evaluation (A 42)
  • DIN EN 88528-11:2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (IEC 88528-11:2004); German version EN 88528-11:2004
  • DIN EN 61189-6:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies (IEC 61189-6:2006); German version EN 61189-6:2006

GM Holden Ltd, Within-group and between-group tests

Japanese Industrial Standards Committee (JISC), Within-group and between-group tests

  • JIS A 4710:1996 Windows and doorsets -- Thermal resistance test
  • JIS A 1515:1998 Windows and doorsets -- Wind resistance test
  • JIS A 1516:1998 Windows and doorsets -- Air permeability test
  • JIS E 4044:1999 General rules for the test methods of diesel locomotives on completion of construction
  • JIS C 60068-2-41:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests
  • JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
  • JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
  • JIS C 0031:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests
  • JIS A 1529:1997 Doorsets -- Static loading test
  • JIS C 60068-2-39:2004 Environmental testing -- Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
  • JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
  • JIS B 8623:1986 Testing methods for refrigerant condensing units
  • JIS A 1523:1996 Doorsets -- Static torsion test
  • JIS Z 0170:1998 Unit loads -- Stability testing
  • JIS H 8664:2004 Test methods for build-up thermal spraying
  • JIS A 1524:1996 Doorsets -- Vertical load test
  • JIS A 1525:1996 Doorsets -- Repeated opening and closing test
  • JIS C 0028:1988 Basic environmental testing procedures Part 2: Tests Test Z/AD: Composite temperature/humidity cyclic test
  • JIS C 60068-2-53:2014 Environmental testing.Part 2-53: Tests and guidance.Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
  • JIS C 60068-2-50:1997 Basic environmental testing procedures Part 2: Tests Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • JIS C 60068-2-51:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • JIS C 0038:1997 Basic environmental testing procedures Part 2: Tests Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • JIS C 0039:1997 Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
  • JIS A 1518:1996 Doorsets -- Soft heavy body impact test
  • JIS C 60068-2-53:1997 Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
  • JIS C 61300-2-45:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-45: Tests -- Durability test by water immersion
  • JIS A 1513:1996 Windows and doorsets -- General rule for test method
  • JIS A 1513:2018 Windows and doorsets -- General rule for test method
  • JIS B 8623:2002 Testing methods of refrigerant condensing units
  • JIS C 5106:1977 Testing methods for ceramic based multiple components
  • JIS C 0037:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens

ES-AENOR, Within-group and between-group tests

PL-PKN, Within-group and between-group tests

  • PN E04164-03-1986 Enamelled winding round wires Methods of testing Test for resistance to abrasion
  • PN E04164-06-1988 Enamelled winding round wires Methods of test Cut-through test
  • PN-EN 1488-2021-10 E Building valves -- Expansion groups -- Tests and requirements
  • PN E04160-32-1987 Electric cables Methods of testing Hot set test
  • PN E04164-09-1986 Enamelled winding round wires Methods of testing Solder test
  • PN E04164-12-1988 Enamelled round winding wires Methods of test Test of the electrical properties
  • PN E04164-05-1986 Enamelled winding round wires Methods of testing Heat shock test
  • PN E04164-10-1988 Enamelled winding round wires Methods of test Heat bonding test
  • PN-EN IEC 61189-5-601-2021-10 E Test methods for electrical materials, printed boards and other interconnection structures and assemblies -- Part 5-601: General test methods for materials and assemblies -- Reflow soldering ability test for solder joint, and reflow heat resistance test f
  • PN E04164-02-1986 Enamelled winding round wires Methods of testing Test of the mechanical characteristics of enamelled wires
  • PN B06714-11-1987 Mineral aggrcgates Testings Determination of petrography composition
  • PN E04164-00-1988 Enamelled winding round wires Methods of test General

Professional Standard - Water Conservancy, Within-group and between-group tests

Group Standards of the People's Republic of China, Within-group and between-group tests

  • T/NJ 1252-2020 Tractor-implement combination—Test procedure—Subsoiling tillage
  • T/NJ 1251-2020 Tractor-implement combination—Test procedure—Ploughing operation
  • T/NJ 1253-2020 Tractor-implement combination—Test procedure—Land preparation operation
  • T/NJ 1250-2020 Tractor-implement combination—Test procedure—Rotary tillage

National Metrological Technical Specifications of the People's Republic of China, Within-group and between-group tests

  • JJF 1691-2018 Calibration Specification for Impulse Voltage Testers for Winding Interturn Insulation

机械电子工业部, Within-group and between-group tests

International Electrotechnical Commission (IEC), Within-group and between-group tests

  • IEC 61345:1998 UV test for photovoltaic (PV) modules
  • IEC TR 63279:2020 Derisking photovoltaic modules - Sequential and combined accelerated stress testing
  • IEC 62759-1:2022 CMV Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
  • IEC 62759-1:2022 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
  • IEC 60068-2-82:2007/COR1:2009 Environmental testing - Part 2-82: Tests - Test XW<(Index)1>: Whisker test methods for electronic and electric components; Corrigendum 1
  • IEC 61701:1995 Salt mist corrosion testing of photovoltaic (PV) modules
  • IEC 61701:2020 Photovoltaic (PV) modules - Salt mist corrosion testing
  • IEC 61701:2011 Salt mist corrosion testing of photovoltaic (PV) modules
  • IEC 60068-2-40:1976 Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low air pressure tests
  • IEC 60068-2-41:1976 Basic environmental testing procedures. Part 2 : Tests. Test Z/BM: Combined dry heat/low air pressure tests
  • IEC TS 63209-1:2021 Photovoltaic modules - Extended-stress testing - Part 1: Modules
  • IEC 60068-2-39:1976 Basic environmental testing procedures. Part 2 : Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
  • IEC 60068-2-82:2019 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
  • IEC 60439-1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
  • IEC 61189-5:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies
  • IEC 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
  • IEC 62790:2014 Junction boxes for photovoltaic modules - Safety requirements and tests
  • IEC 62716:2013 Photovoltaic (PV) modules - Ammonia corrosion testing
  • IEC 61189-5-504:2020 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Process ionic contamination
  • IEC 60068-2-50:1983 Basic environmental testing procedures. Part 2 : Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • IEC 60068-2-51:1983 Basic environmental testing procedures; part 2: tests; test Z/BFc: combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
  • IEC 60068-2-53:1984 Basic environmental testing procedures. Part 2 : Tests. Guidance to Tests Z/AFc and Z/BFc : Combined temperature (cold and dry heat) and vibration (sinusoidal) tests.
  • IEC 60068-2-41:1976/AMD1:1983 Basic environmental testing procedures. Part 2 : Tests. Test Z/BM: Combined dry heat/low air pressure tests
  • IEC 60068-2-40:1976/AMD1:1983 Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low air pressure tests
  • IEC 62790:2020 RLV Junction boxes for photovoltaic modules - Safety requirements and tests
  • IEC 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies
  • IEC 60439-1/AMD1/COR1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Corrigendum 1
  • IEC 62938:2020 Photovoltaic (PV) modules - Non-uniform snow load testing
  • IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in electronic assemblies
  • IEC 61189-5-601:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability tes
  • IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
  • IEC TR 61189-5-506:2019 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-506: General test methods for materials and assemblies - An intercomparison evaluatio

TH-TISI, Within-group and between-group tests

  • TIS 1335-1996 Ftre.resistance tests.door and shutter assemblies
  • TIS 1332-1996 Rubber and plastics hoses and hose assemblies.hydrostatic testing

European Committee for Standardization (CEN), Within-group and between-group tests

  • EN ISO 16964:2020 Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019)
  • EN ISO 8032:1999 Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test)
  • EN ISO 22675:2016 Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods
  • EN 1488:2000 Building valves - Expansion groups - Tests and requirements
  • EN 1488:2021 Building valves - Expansion groups - Tests and requirements
  • EN 1487:2000 Building Valves - Hydraulic Safety Groups - Tests and Requirements
  • EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
  • CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8: Proof test
  • EN 13741:2003 Thermal performance acceptance testing of mechanical draught series wet cooling towers

British Standards Institution (BSI), Within-group and between-group tests

  • BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
  • BS 7698-8:1996 Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets
  • BS ISO 8528-8:2016 Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets
  • BS EN 60068-2-53:2010 Environmental testing - Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
  • BS EN 15888:2014 Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing
  • BS EN 61189-5:2009 Test methods for electrical materials, interconnection structures and assemblies - Test methods for printed board assemblies
  • BS EN 61189-5:2006 Test methods for electrical materials, interconnection structures and assemblies –– Part 5: Test methods for printed board assemblies
  • BS EN 60851-1+A2:1998 Winding wires. Test methods. General
  • BS EN 60851-1:1996+A2:2009 Winding wires - Test methods - General
  • BS ISO 5879:2023 Space systems. Ground test for the separation between a launch vehicle and a spacecraft. Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
  • BS EN 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Test methods for materials used in manufacturing electronic assemblies
  • BS ISO TR 5925-2:1998 Fire tests - Smoke control door and shutter assemblies - Commentary on test method and test data application
  • BS EN 88528-11:2004 Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test methods
  • BS EN 88528-11:2005 Reciprocating internal combustion engine driven alternating current generating sets. Rotary uninterruptible power systems. Performance requirements and test methods
  • BS ISO 21751:2011 Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test
  • BS EN 14035-5:2006 Fireworks - Batteries and combinations - Specification and test methods
  • BS EN 14035-5:2007 Fireworks - Batteries and combinations - Specification and test methods
  • BS ISO 16964:2015 Gas cylinders. Flexible hoses assemblies. Specification and testing
  • BS EN 1488:2000 Building valves - Expansion groups - Tests and requirements
  • BS EN 60851-6:2012 Winding wires. Test methods. Thermal properties
  • BS ISO TR 5925-2:1997 Fire tests. Smoke control door and shutter assemblies - Commentary on test method and test data application
  • BS EN ISO 8032:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
  • BS EN ISO 8032:1998 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
  • BS EN IEC 61189-5-502:2021 Test methods for electrical materials, printed board and other interconnection structures and assemblies. General test methods for materials and assemblies. Surface insulation resistance (SIR) testing of assemblies
  • BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies
  • BS IEC 62790:2014 Junction boxes for photovoltaic modules. Safety requirements and tests
  • BS IEC 61189-5-2:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering flux for printed board assemblies
  • BS IEC 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering paste for printed board assemblies
  • BS EN 61701:2012 Salt mist corrosion testing of photovoltaic (PV) modules
  • BS EN 60851-5:2008 Winding wires – Test methods –– Part 5: Electrical properties
  • BS EN 60851-5:2008+A1:2011 Winding wires. Test methods. Electrical properties
  • BS EN 60851-3:2009+A1:2013 Winding wires. Test methods. Mechanical properties
  • BS EN 60851-4:1998 Winding Wires - Test methods - Chemical properties
  • BS EN 1634-3:2005 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Smoke control test for door and shutter assemblies
  • BS EN 1634-3:2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Smoke control test for door and shutter assemblies
  • BS EN 50289-4-11:2002 Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method
  • BS EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11b - Combined/sequential cold, low air pressure and damp heat
  • BS DD ENV 302-5:2002 Adhesives for load-bearing timber structures - Test tethods - Determination of the conventional assembly time
  • BS EN 3841-511:2005 Aerospace series - Circuit breakers - Test methods - Combined test: temperature, altitude and vibration
  • BS EN 3841-511:2004 Circuit breakers-Test methods-Part 511:Combined test:temperature,altitude and vibration
  • BS EN 1487:2000 Building valves - Hydraulic safety groups - Tests and requirements
  • BS EN 1487:2014 Building valves. Hydraulic safety groups. Tests and requirements
  • BS EN 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Guidance for printed board assemblies
  • BS 7698-6:1993 Reciprocating internal combustion engine driven alternating current generating sets - Test methods

Professional Standard - Agriculture, Within-group and between-group tests

  • JB/Z 293-1987 AC high voltage motor stator winding insulation test specification

国家铁路局, Within-group and between-group tests

VN-TCVN, Within-group and between-group tests

  • TCVN 7699-2-38-2007 Environmental testing.Part 2-38: Tests.Test Z/AD: Composite temperature/humidity cyclic test
  • TCVN 7699-2-39-2007 Environmental testing.Part 2-39: Tests.Test Z/AMD: Combined sequential cold, low air pressure and damp heat test

Professional Standard - Electricity, Within-group and between-group tests

  • DL/T 851-2004 Acceptance tests for combined-cycle power plants
  • DL/T 507-2002 Start-up test code for hydraulic-turbine and generator units
  • DL/T 1616-2016 Performance test guide of fossil fired power plant
  • DL/T 507-2014 Start-up test code for Hydro-generating units
  • DL 507-1993 Regulations for start-up test of hydro-generator set

国家能源局, Within-group and between-group tests

  • NB/T 10301-2019 Thermal balance test method for reciprocating internal combustion gas generator sets
  • NB/T 10270-2019 Geothermal generator performance acceptance test procedures
  • NB/T 42094-2016 Electrical test procedures for small hydropower units
  • NB/T 42131-2017 General rules for environmental testing requirements for photovoltaic modules

未注明发布机构, Within-group and between-group tests

Society of Automotive Engineers (SAE), Within-group and between-group tests

SAE - SAE International, Within-group and between-group tests

Indonesia Standards, Within-group and between-group tests

  • SNI IEC 60439-1:2009 Low-voltage switchgear and controlgear assemblies. Part 1: Type-tested and partially type-tested assemblies

Malaysia Standards, Within-group and between-group tests

CEN - European Committee for Standardization, Within-group and between-group tests

  • EN ISO 22675:2006 Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods

European Committee for Electrotechnical Standardization（CENELEC）, Within-group and between-group tests

  • EN 61189-5:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies
  • HD 323.2.40 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests
  • EN IEC 61189-5-601:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test for
  • EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies
  • EN 61345:1998 UV Test for Photovoltaic (PV) Modules
  • EN 88528-11:2004 Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
  • HD 323.2.51 S1-1987 Basic Environmental Testing Procedures Part 2: Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non Heat-Dissipating Specimens
  • EN 61189-5-2:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies
  • EN 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies

IT-UNI, Within-group and between-group tests

TR-TSE, Within-group and between-group tests

Professional Standard - Railway, Within-group and between-group tests

  • TB/T 2491-1994 Fastener Assembly Fatigue Test Method
  • TB/T 2711-2015 Test method for air compressor set on locomotive and EMU/DMU
  • TB/T 2532-1995 Diesel engine for diesel locomotive--Test method for load performance of main generating set
  • TB/T 3345-2014 Starting and accelerating test methods for EMU
  • TB/T 3348-2014 Traction characteristics test methods for EMU
  • TB/T 3250-2010 Specifications of sealing design and test for powered car train-set

中国石油天然气总公司, Within-group and between-group tests

  • SY/T 5808-1993 Assembly and test procedures for electric submersible pumps

GOSTR, Within-group and between-group tests

  • GOST R 59047-2020 Interaction with testing laboratories during testing of consumer goods. Guide for non-profit organizations

Lithuanian Standards Office , Within-group and between-group tests

  • LST EN 3909-2008 Aerospace series - Test fluids and test methods for electric components and sub-assemblies
  • LST EN IEC 61189-5-601:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test for

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Within-group and between-group tests

  • ASHRAE 127-2007 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners P/C: 02/2009

(U.S.) Ford Automotive Standards, Within-group and between-group tests

ZA-SANS, Within-group and between-group tests

  • SANS 60439-1:2004 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies
  • SANS 8528-8:2006 Reciprocating internal combustion engine driven alternating current generating sets Part 8: Requirements and tests for low-power generating sets

ES-UNE, Within-group and between-group tests

  • UNE-EN ISO 10961:2020 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019)
  • UNE-EN IEC 61189-5-601:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test ...

Professional Standard - Coal, Within-group and between-group tests

  • MT 98-1984 Specification for type test of hydraulic support hose assembly and intermediate joint components

Professional Standard - Electron, Within-group and between-group tests

  • SJ/Z 9001.10-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/AD: Composite temperature/humidity cyclic test
  • SJ/T 10669-1995 Solderability tests for surface mounted devices

Professional Standard - Energy, Within-group and between-group tests

SE-SIS, Within-group and between-group tests

United States Navy, Within-group and between-group tests

Professional Standard - Aviation, Within-group and between-group tests

International Telecommunication Union (ITU), Within-group and between-group tests

  • ITU-T Z.141-2006 Testing and Test Control Notation version 3 (TTCN-3): Tabular presentation format (TFT) Study Group 17
  • ITU-T Z.143-2006 Testing and Test Control Notation version 3 (TTCN-3): Operational semantics Study Group 17
  • ITU-T Z.163-2007 Testing and Test Control Notation version 3: TTCN-3 graphical presentation format (GFT) Study Group 17

Military Standard of the People's Republic of China-General Armament Department, Within-group and between-group tests

  • GJB 350.65-1987 Surface combat ship mooring and sailing test procedures Integrated navigation system test
  • GJB 6850.68-2009 Surface ship mooring and sailing test procedures part 68: electric generator set test
  • GJB 164.39-1986 Procedures for mooring and sailing test of landing craft Diesel generator set and switchboard test
  • GJB 164.42-1986 Procedures for mooring and sailing tests of landing ships - battery pack and charging and discharging device testing
  • GJB 524.33-1988 Speedboat (planing boat) mooring and sailing test procedures Battery pack charging and discharging system test

CENELEC - European Committee for Electrotechnical Standardization, Within-group and between-group tests

  • EN 60439-1:1994 Low-Voltage Switchgear and Controlgear Assemblies Part 1: Specification for Type-Tested and Partially Type-Tested Assemblies (Incorporates Amendments A1 : 1995 and A11 : 1996)
  • EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (Incorporates Amendment A1: 2004; Incorporating Corrigendum No. 1)

RO-ASRO, Within-group and between-group tests

  • STAS SR ISO 3458:1995 Assembled jpints between fittings polyethylene (PE) pressure pipes -Test of leakproofness under internal pressure
  • STAS 9904/3-1975 ELEGTRIGAL ROTATING MACHINES Test methods Resistance test of windings

Defense Logistics Agency, Within-group and between-group tests

American Welding Society (AWS), Within-group and between-group tests

  • WRC 008:1950 Tests of Columns Under Combined Thrust and Moment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Within-group and between-group tests

  • ASHRAE 182-2008 Method of Testing Absorption Water-Chilling and Water-Heating Packages
  • ASHRAE SF-98-21-1-1998 Experimental Results and Modeling Tests of an Adsorptive Air-Conditioning Unit

GB-REG, Within-group and between-group tests

  • REG NASA-LLIS-0568-1997 Lessons Learned ?Battery"Popping" During ATLO (Assembly Test and Launch Operations) Due to Horizontal Mounting

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Within-group and between-group tests

  • GJB 3196.43A-2005 Test methods of cartridge.Part 43:Action time in chamber.Indirect measure method

Association of German Mechanical Engineers, Within-group and between-group tests

BE-NBN, Within-group and between-group tests

  • NBN C 63-439-1-1990 Low-voltage switchgear and controlgear assemblies Requirements for type-tested and partially type-tested assemblies

  Within-group and between-group tests.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved