ZH
RU
ES

Range

Range, Total:499 items.

In the international standard classification, Range involves: Linear and angular measurements, Metrology and measurement in general, Software development and system documentation, Internal combustion engines for road vehicles, Motor cycles and mopeds, Acoustics and acoustic measurements, Telecommunication terminal equipment, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Vocabularies, Electromagnetic compatibility (EMC), Aerospace electric equipment and systems, Small craft, Laboratory medicine, Solar energy engineering, Tea. Coffee. Cocoa, Protection of and in buildings, Quality, Nuclear energy engineering, Astronomy. Geodesy. Geography, Construction technology, Aircraft and space vehicles in general, Hand-held tools, Mining and quarrying, Protection against crime, Earthworks. Excavations. Foundation construction. Underground works, Electrical accessories, Buildings, Noise with respect to human beings, Aerospace engines and propulsion systems, Medical sciences and health care facilities in general, Aids for disabled or handicapped persons, Radiation measurements, Farming and forestry, Technical drawings, Civil engineering in general, Fibre optic communications, Power transmission and distribution networks, Clothes, Measurement of volume, mass, density, viscosity, On-board equipment and instruments, Electromechanical components for electronic and telecommunications equipment, Textile fibres, Structure and structure elements, Air quality, Coatings and related processes used in aerospace industry, Corrosion of metals, Electronic components in general, Radiocommunications, Shipbuilding and marine structures in general, Non-destructive testing, Applications of information technology, Products of the textile industry, Alarm and warning systems, Hydraulic energy engineering, Hydraulic construction, Cereals, pulses and derived products, Prepackaged and prepared foods, Construction industry, Home economics in general, Components and accessories for telecommunications equipment, Terminology (principles and coordination), Analytical chemistry, Protection against fire, Fluid power systems, Wind turbine systems and other alternative sources of energy, Industrial trucks, Special purpose vehicles, Vibrations, shock and vibration measurements, Road engineering, Rotary-reciprocating mechanisms and their parts, Information technology (IT) in general, Resistors, Industrial automation systems, Character sets and information coding, Mining equipment.

U.S. Air Force, Range

• AIR FORCE A-A-50729 VALID NOTICE 1-2012 Meter, Multiple Scale

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Range

• JEDEC JEP171-2014 GDDR5 Measurement Procedures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Range

• GB/T 6311-2004 Long span dial gauges reading in 0.01mm
• GB/T 6311-1986 Long range dial gauges
• GB/T 20917-2007 Software engineering Software measurement process
• GB/T 19030-2009 Quality engineering-Vocabulary
• GB/T 20514-2006 Photovoltaic systems Power conditioners Procedure for measuring efficiency
• GB/T 14696-1993 Code for the measurement of ship vibration
• GB/T 14557-1993 Electrical tests and measuring procedures for ridio-frequency connectors:Reflection factor
• GB/T 11683-1989 High range X,gamma and beta radiation dose and dose rate portable instrument for emergency radiation protection purposes
• GB/T 14697-1993 Code for the measurement of local vibration of ship
• GB/T 19022-2003 Measurement management systems-Requirements for measurement processes and measruing equipment

Japanese Industrial Standards Committee (JISC), Range

• JIS X 0141:2004 Software measurement process
• JIS C 8906:1993 Measuring procedure of photovoltaic system performance
• JIS C 8906:2000 Measuring procedure of photovoltaic system performance
• JIS X 0141:2009 Systems and software engineering -- Measurement process
• JIS C 8961:1993 Measuring procedure of power conditioner efficiency for photovoltaic systems
• JIS C 8961:2008 Measuring procedure of power conditioner efficiency for photovoltaic systems
• JIS C 8971:1993 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
• JIS Q 10012:2011 Measurement management systems -- Requirements for measurement processes and measuring equipment

German Institute for Standardization, Range

• DIN 58911-2:2000-03 Haemostaseology - Calibration of measurement procedures - Part 2: Photometric measurement procedures
• DIN 58911-1:2000-03 Haemostaseology - Calibration of measurement procedures - Part 1: Clotting time measurement procedures
• DIN EN 61683:2000 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
• DIN 58902:2000 Haemostaseology - Reference measurement procedure for the determination of batroxobin time
• DIN ISO 12124:2002 Procedures for the measurement of real-ear acoustical characteristics of hearing aids (ISO 12124:2001)
• DIN EN 61810-7:2007 Electromechanical elementary relays - Part 7: Test and measurement procedures (IEC 61810-7:2006); German version EN 61810-7:2006
• DIN EN 61810-7:2007-02 Electromechanical elementary relays - Part 7: Test and measurement procedures (IEC 61810-7:2006); German version EN 61810-7:2006
• DIN 33402-1:2008-03 Ergonomics - Body dimensions of people - Part 1: Terms and definitions, measuring procedures
• DIN EN ISO 8655-7:2022-11 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022); German version EN ISO 8655-7:2022
• DIN 58904:1998 Haemostaseology - Determination of protein C activity - Reference measurement procedure with a chromogenic peptide substrate
• DIN VDE 0847-1:1981 Procedure of measurements for the electromagnetic compatibility; measurement of conducted interference units VDE Specification
• DIN EN 13402-1:2001 Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified); German version EN 13402-1:2001
• DIN 70907:1991 Piston rings; test of quality characteristics; terms, measuring procedures; supplement to DIN ISO 6621 Part 2
• DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
• DIN EN ISO 10012:2004 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003
• DIN EN ISO 10012:2004-03 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Range

• GJB/J 5412-2005 Verification regulation for wide range digital RLC meter
• GJB/J 5414-2005 Verification regulation for rang calibrator of power meter

Military Standard of the People's Republic of China-General Armament Department, Range

• GJB 8817-2015 Calibration procedures for wide range digital RLC measuring instruments
• GJB 8819-2015 Calibration procedures for power indicator range calibrators
• GJB 3246-1998 General specifications for field small-capacity program-controlled switching vehicles
• GJB 4029A-2020 Spectrum measurement procedures
• GJB 4029-2000 Spectrum measurement procedures
• GJB 10026-2021 Specification for long-range silicon microgyros for rotating missiles
• GJB 692-1989 Marine environmental noise measurement procedures

American National Standards Institute （ANSI), Range

• ANSI/SAE J973-1993 Ignition System Measurements Procedure
• ANSI/SCTE 119-2011 Measurement Procedure for Noise Power Ratio
• ANSI/IEEE 475:2000 Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
• ANSI/TIA/EIA 455-64-1997 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
• ANSI/IEEE 644:1994 Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
• ANSI/TIA/EIA 455-106-1992 Procedure for Measuring the Near-Infrared Absorbance of Fiber Optic Coating Materials
• ANSI/TIA-470.310-D-2010 Telecommunications Telephone Terminal Equipment Cordless Telephone Range Measurement Procedures
• ANSI/TIA-455-67-A-2003 Procedures for Measuring High Temperature Aging Effects on Optical Characteristics of Optical Fibers
• ANSI/IEEE 15939:2008 Standard for Systems and Software Engineering - Measurement Process
• ANSI/SCTE 62-2012 Measurement Procedure for Noise Figure
• ANSI/TIA/EIA 526-19-2000 Optical Signal-to-Noise Ratio Measurement Procedures for Dense Wavelength-Division Multiplexed Systems
• ANSI/TIA/EIA 455-203-2001 Launched Power Distribution Measurement Procedure for Graded-Index Multi-mode Fiber Transmitters
• ANSI/ASQ/ISO Q10012:2003 Measurement management systems -Requirements for measurement processes and measuring equipment

Society of Automotive Engineers (SAE), Range

• SAE J973-1999 Ignition System Measurements Procedure
• SAE J973A-1973 Ignition System Measurements Procedure
• SAE J1168-2007 Motorcycle Bank Angle Measurement Procedure
• SAE J1168-2012 Motorcycle Bank Angle Measurement Procedure
• SAE J1074-1974 Engine Sound Level Measurement Procedure
• SAE J1003-1995 DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE
• SAE J1074-1977 ENGINE SOUND LEVEL MEASUREMENT PROCEDURE
• SAE J1074-1984 ENGINE SOUND LEVEL MEASUREMENT PROCEDURE
• SAE J1074-2000 Engine Sound Level Measurement Procedure
• SAE ARP5029-2007 Measurement Procedures for Strobe Anticollision Lights
• SAE J1752/1-2006 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits—Integrated Circuit EMC Measurement Procedures—General and Definitions
• SAE J1752-1-1997 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions
• SAE J1752-1-2021 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits Integrated Circuit EMC Measurement Procedures General and Definition
• SAE J1752/1-2016 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions
• SAE J1752/1-2021 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions
• SAE J1752-3-2017 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits Integrated Circuit EMC Measurement Procedures General and Definition
• SAE ARP5029A-2014 Measurement Procedures for Strobe Anticollision Lights
• SAE J34-2011 Exterior Sound Level Measurement Procedure for Pleasure motorboats
• SAE J1168-2021 Motorcycle Bank Angle Measurement Procedure
• SAE J1168-1984 MOTORCYCLE BANK ANGLE MEASUREMENT PROCEDURE
• SAE J1168-1989 MOTORCYCLE BANK ANGLE MEASUREMENT PROCEDURE
• SAE J1168-2002 Motorcycle Bank Angle Measurement Procedure
• SAE J3001-2023 Brake Insulator Damping Measurement Procedure
• SAE J1161-1983 OPERATIONAL SOUND LEVEL MEASUREMENT PROCEDURE FOR SNOW VEHICLES
• SAE J88B-1979 EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY
• SAE J1970-2003 Shoreline Sound Level Measurement Procedure for Recreational Motorboats
• SAE J34A-1977 EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR PLEASURE MOTORBOATS
• SAE ARP5287-2008 Optical Measurement Procedures for Airborne Head Up Display (HUD)
• SAE ARP5029B-2019 Measurement Procedures for Short Pulse Width Strobe Anticollision Lights
• SAE J1157-1976 MEASUREMENT PROCEDURE FOR EVALUATION OF FULL-FLOW, LIGHT-EXTINCTION SMOKEMETER PERFORMANCE
• SAE J1281-2009 Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft
• SAE J1160-1976 OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SNOW VEHICLES
• SAE ARP4260-1998 Photometric and colorimetric measurement procedures for airborne flat panel displays
• SAE ARP5646-2008 Quality Program Guidelines for Deicing/Anti-icing of Aircraft on the Ground
• SAE J1046-1974 EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
• SAE J1046A-1976 EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
• SAE ARP1782A-2008 Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays
• SAE J919C-1979 OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY—SINGULAR TYPE TEST
• SAE J973-2013 Ignition System Measurements Procedure
• SAE ARP1782A-2002 Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays
• SAE J3165-2022 Component Level Electric Parking Brake (EPB) Actuation Noise Measurement Procedure
• SAE ARP1256D-2011 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
• SAE ARP4260B-2019 Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays
• SAE J1752/1-1997 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits-Integrated Circuit Emc Measurement Procedures-General and Definition
• SAE J1074-2014 Engine Sound Level Measurement Procedure
• SAE ARP1256E-2023 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
• SAE J1161-2004 Operational Sound Level Measurement Procedure for Snow Vehicles
• SAE J2005-1991 Stationary Sound Level Measurement Procedure for Pleasure Motorboats, Recommended Practice December 1991
• SAE J1166A-1979 OPERATOR STATION SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY—WORK CYCLE TEST
• SAE J919B-1976 OPERATOR SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE CONSTRUCTION MACHINERY—SINGULAR TYPE TEST
• SAE ARP1256A-1980 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES
• SAE ARP1256-1971 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES

SAE - SAE International, Range

• SAE J35-1988 Diesel Smoke Measurement Procedure
• SAE J973-2020 Ignition System Measurements Procedure
• SAE J973-1995 Ignition System Measurements Procedure@ Recommended Practice
• SAE J973-1993 Ignition System Measurements Procedure
• SAE J35-2002 Diesel Smoke Measurement Procedure
• SAE J35-1973 Diesel Smoke Measurement Procedure
• SAE J35-1995 Diesel Smoke Measurement Procedure
• SAE J1003-1990 DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE
• SAE J1168-1996 Motorcycle Bank Angle Measurement Procedure
• SAE J1003-1984 Diesel Engine Emission Measurement Procedure
• SAE J1003-1973 Diesel Engine Emission Measurement Procedure@ Recommended Practice
• SAE J1168-1977 Motorcycle Bank Angle Measurement Procedure
• SAE J1003-2002 Diesel Engine Emission Measurement Procedure
• SAE J1752-3-2003 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits Integrated Circuit EMC Measurement Procedures General and Definition
• SAE J1752-1-2016 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits Integrated Circuit EMC Measurement Procedures General and Definition
• SAE J1262-1999 Sound Level Measurement Procedure for Trenching Equipment
• SAE J1262-1979 Sound Level Measurement Procedure for Trenching Equipment
• SAE J34-1977 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
• SAE J34-2005 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
• SAE J34-1973 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
• SAE J34-2018 Exterior Sound Level Measurement Procedure for Recreational Motorboats
• SAE J34-1991 EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR PLEASURE MOTORBOATS
• SAE J1379-2020 ROLLING RESISTANCE MEASURMENT PROCEDR/TRK & BUS TIRE
• SAE J1379-1988 ROLLING RESISTANCE MEASURMENT PROCEDR/TRK & BUS TIRE
• SAE J1157-1988 MEASUREMENT PROCEDURE FOR EVALUATION OF FULL - FLO
• SAE J1281-2016 Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft
• SAE J1160-1977 Operator Ear Sound Level Measurement Procedure for Snow Vehicles@ Recommended Practice (February 1977)
• SAE J1281-2022 Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft
• SAE J1160-2004 Operator Ear Sound Level Measurement Procedure for Snow Vehicles
• SAE J1752-3-1995 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit Radiated Emissions Measurement Procedure 150 kHz to 1000 MHz@ TEM Cell@ Recommended Practice (March 1995)
• SAE ARP1782-1989 Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays
• SAE ARP4260A-2009 Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays
• SAE ARP1256C-2006 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
• SAE J1379-1983 Rolling Resistance Measurement Procedure for Highway Truck and Bus Tires
• SAE J1161-2017 Operational Sound Level Measurement Procedure for Snow Vehicles
• SAE J1161-2021 Operational Sound Level Measurement Procedure for Snow Vehicles
• SAE J1161-1976 Operational Sound Level Measurement Procedure for Snow Vehicles@ Recommended Practice (November 1976)
• SAE J1166-1976 Operator Station Sound Level Measurement Procedure for Powered Mobile Earthmoving Machinery-Work Cycle Test
• SAE J1166-1987 Sound Measurement - Earthmoving Machinery - Operator-Work Cycle
• SAE J1166-1986 Sound Measurement - Earthmoving Machinery - Operator - Work Cycle
• SAE J1166-1990 Sound Measurement - Off-Road Self-Propelled Work Machines Operator- Work Cycle@ Standard
• SAE J1166-2021 OPERATOR STATION SOUND LEVEL MEASUREMENT PROCEDURE FOR EARTHMOVING MACHINERY—WORK CYCLE TEST

National Metrological Verification Regulations of the People's Republic of China, Range

• JJG 379-1995 Verification Regulation of Wide Range Dial Gauges Reading in 0.01mm
• JJG 379-2009 Verification Regulation of Wide Range Dauges Reading in 0.01mm

International Organization for Standardization (ISO), Range

• ISO/IEC 15939:2002 Software engineering - Software measurement process
• ISO 4786:1977 Enclosed-scale adjustable-range thermometers
• ISO 7078:2020 Buildings and civil engineering works — Procedures for setting out, measurement and surveying — Vocabulary
• ISO 7078:1981 Buildings and civil engineering works — Procedures for setting out, measurement and surveying — Vocabulary
• ISO/IEC 15939:2007 Systems and software engineering - Measurement process
• ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process
• ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures
• ISO 8655-6:2022 Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume
• ISO 8655-8:2022 Piston-operated volumetric apparatus — Part 8: Photometric reference measurement procedure for the determination of volume
• ISO 362:1994 Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method
• ISO 362:1981 Acoustics; Measurement of noise emitted by accelerating road vehicles; Engineering method
• ISO/TR 29944:2010 Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures
• ISO 20581:2016 Workplace air - General requirements for the performance of procedures for the measurement of chemical agents
• ISO 8655-7:2022 Piston-operated volumetric apparatus — Part 7: Alternative measurement procedures for the determination of volume
• ISO/CD 10012:2023 Measurement management systems — Requirements for measurement processes and measuring equipment

The American Road & Transportation Builders Association, Range

• AASHTO R 20-1999 Standard Recommended Practice for Procedures for Measuring Highway Noise
• AASHTO R 20-1999(R2008) Standard Recommended Practice for Procedures for Measuring Highway Noise
• AASHTO R20-1999 Standard Recommended Practice for Procedures for Measuring Highway Noise Twentieth Edition

TIA - Telecommunications Industry Association, Range

• TIA-526-4-1995 OFSTP-4 Optical Eye Pattern Measurement Procedure
• TIA/EIA-455-111-2000 FOTP-111 Procedure for the Measurement of Optical Fiber Curl
• TIA-470.310-D-2010 Telecommunications Telephone Terminal Equipment Cordless Telephone Range Measurement Procedures
• TIA-5047-2018 Telecommunications Communications Products Speech Quality Subjective Measurement Procedures and Performance Recommendations
• TIA-4953-B-2018 Telecommunications Communications Products Amplified Telephone Measurement Procedures and Performance Requirements
• TSB57-1993 Sideband Spectrum Measurement Procedure for Transmitters Intended for Use in the 220-222 MHz Band
• TSB57 ERTA-1993 Sideband Spectrum Measurement Procedure for Transmitters Intended for Use in the 220-222 MHz Band

Group Standards of the People's Republic of China, Range

• T/QGCML 1743-2023
• T/ZS 0037-2019 Construction quality regulations for landscaping projects
• T/CAMET 03001-2020 Code of practice for measurement of metro vibration source intensity induced

US-CLSI, Range

• CLSI EP06-2020 Evaluation of Linearity of Quantitative Measurement Procedures

British Standards Institution (BSI), Range

• BS 1365:1990 Specification for short-range short-stem thermometers
• BS ISO 7078:2020 Buildings and civil engineering works. Procedures for setting out, measurement and surveying. Vocabulary
• BS ISO/IEC 15939:2007 Systems and software engineering - Measurement process
• BS EN 50632-1:2015 Electric motor-operated tools. Dust measurement procedure. General requirements
• BS EN 50632-1:2015+A1:2019 Electric motor-operated tools. Dust measurement Procedure. General requirements
• BS EN 61810-7:2006 Electromechanical elementary relays - Test and measurement procedures
• 19/30392268 DC BS ISO 7078. Buildings and civil engineering works. Procedures for setting out, measurement and surveying. Vocabulary
• BS EN 50632-2-6:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for hammers
• BS EN 13402-1:2001 Size designation of clothes - Terms, definitions and body measurement procedure
• PD IEC/PAS 63083:2017 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices
• BS EN 50632-2-6:2015+A2:2020 Electric motor-operated tools. Dust measurement procedure - Particular requirements for hammers
• BS EN 50632-2-14:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for planers
• BS EN 50632-2-5:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for circular saws
• BS EN 50632-1:2015+A2:2021 Electric motor-operated tools. Dust measurement procedure - Part 1. General requirements
• BS EN 50632-2-19:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for jointers
• PD CEN/CLC/TR 17602-80-04:2021 Space product assurance. Software metrication programme definition and implementation
• BS EN ISO 8655-8:2022 Piston-operated volumetric apparatus - Photometric reference measurement procedure for the determination of volume
• BS CECC 00114-4:1992 Rule of procedure 14 - Quality assessment procedures - Procedure for enhanced assessment of quality
• BS ISO/IEC/IEEE 15939:2017 Tracked Changes. Systems and software engineering. Measurement process
• BS EN ISO 8655-6:2022 Piston-operated volumetric apparatus - Gravimetric reference measurement procedure for the determination of volume
• BS 6953:1988 Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
• BS ISO 23783-2:2022 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
• BS EN 50632-3-1:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for transportable table saws
• BS EN ISO 23783-2:2023 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
• BS EN 50632-2-1:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for diamond core drills
• BS ISO 20581:2016 Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
• BS EN 50632-2-4:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for sanders other than disk type
• BS EN 50632-3-9:2016 Electric motor-operated tools. Dust measurement procedure. Particular requirements for transportable mitre saws
• PD ISO/TR 29944:2010 Powered industrial trucks and tractors. Brake performance. Determination of measurement procedures
• BS EN 50632-3-9:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for transportable mitre saws
• BS EN ISO 8655-7:2022 Tracked Changes. Piston-operated volumetric apparatus. Alternative measurement procedures for the determination of volume
• BS EN 61300-3-4:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Attenuation
• BS EN 50632-2-22:2015+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for cut-off machines and wall chasers
• BS EN 50632-2-17:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for routers and trimmers
• BS EN 50632-2-11:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for jig and sabre saws
• PD CLC/TR 62662:2011 Measurement procedures for materials used in photovoltaic modules. Encapsulants. Test procedure of optical durability
• BS EN IEC 62788-1-7:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Test procedure of optical durability

未注明发布机构, Range

• BS 1365:1990(2007) Specification for Short - range short - stem thermometers
• NB/T 51025-2014 Measurement procedures for coal resource exploration projects
• DIN EN 482:1994 Workplace atmosphere – General requirements for procedures for measuring chemical agents

(U.S.) Ford Automotive Standards, Range

• FORD W-GP3-1999 BAR GAUGE NO GO RANGE FROM 50-UP TO-180
• FORD W-GF1-1999 MAX. MALE RADIUS GAUGE RANGE UP TO-9.99
• FORD W-GM1-1999 MASTER DISCS GAUGE RANGE FROM 3-UP TO-10
• FORD W-GP2-1999 COLLET STYLE PLUG GAUGE RANGE ABOVE 0.25-UP TO-25
• FORD W-GR1-1999 PLAIN AND MASTER RING GAUGE RANGE FROM .25-UP TO-13
• FORD W-GS2-1999 RECESS ADJUSTABLE SNAP GAUGE FOR WORKPIECE TOLERANCE 0.5 AND ABOVE RANGE UP TO-286

Professional Standard - Medicine, Range

• YY/T 1195-2011 Reference measurement procedure of total protein in serum

RU-GOST R, Range

• GOST R 51182-1998 Coffee products. Procedure of mass parts measurement of coffeine
• PNST 188-2017 Measurement procedures for operational control of instruments for activity measurement
• GOST R IEC 61683-2013 Photovoltaic systems. Power conditioners. Procedure for measuring efficiency
• GOST 8.010-2013 State system for ensuring the uniformity of measurements. Procedures of measurements. Main principles
• GOST 8.010-1990 State system for ensuring the uniformity of measurements. Procedures of measurements
• GOST IEC 61810-7-2013 Electromechanical elementary relays. Part 7. Test and measurement procedures
• GOST R 51181-1998 Food concentrates for children and dietary nutrition. Procedure of mass parts measurement of carotinoids
• GOST R 8.853-2013 State system for ensuring the uniformity of measurements. Optical characteristics of energy-saving windows. Measurement procedure
• GOST R 59342-2021 System engineering. Protection of information in system measurement process
• GOST R 59670-2021 Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
• GOST R 8.903-2015 State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
• GOST R 8.865-2013 State system for ensuring the uniformity of measurements. Spatial distribution of spectral radiance of distant objects. Measurement procedure

United States Navy, Range

• NAVY MIL-STD-1605-1973 PROCEDURES FOR CONDUCTING A SHIPBOARD ELECTROMAGNETIC INTERFERENCE (EMI) SURVEY (SURFACE SHIPS)
• NAVY MIL-STD-1362 A VALID NOTICE 1-1992 PROCEDURES FOR STEAM PURITY MEASUREMENT NAVAL PROPULSION BOILERS
• NAVY MIL-STD-1362 A-1987 PROCEDURES FOR STEAM PURITY MEASUREMENT NAVAL PROPULSION BOILERS
• NAVY MIL-STD-2195 A-1993 DETECTION AND MEASUREMENT OF DEALLOYING CORROSION ON ALUMINUM BRONZE AND NICKEL-ALUMINUM BRONZE COMPONENTS, INSPECTION PROCEDURE FOR

Standard Association of Australia （SAA）, Range

• AS 1277:1983 Acoustics - Measurement procedures for ducted silencers
• AS/NZS ISO/IEC 15939:2013
• AS/NZS ISO/IEC/IEEE 15939:2022 Systems and software engineering — Measurement process
• AS ISO 12124:2003(R2014)
• AS 1100.401:1984 Technical drawing - Engineering survey and engineering survey design drawing
• AS/NZS 4308:2001 Procedures for the collection,detection and quantitation of drugs of abuse in urine
• AS/NZS 4760:2019 Procedure for specimen collection and the detection and quantification of drugs in oral fluid

Indonesia Standards, Range

• SNI ISO 10012:2009 Measurement management systems - Requirements for measurement processes and measuring equipment
• SNI 2818-2012 Tata cara pengukuran geolistrik Schlumberger untuk eksplorasi air tanah

Inner Mongolia Provincial Standard of the People's Republic of China, Range

• DB15/T 1815-2020 Precise Triangulation Height Measurement Regulations

Professional Standard - Energy, Range

• NB/T 20235-2013 Wide Range Neutron Flux Rate Measurement Based on Mean Square Voltage Method

Acoustical Society of America (ASA), Range

• ASA S12.18-1994 Procedures for Outdoor Measurement of Sound Pressure Level

BELST, Range

• STB 1640-2006 Road vehicles. Procedure for measuring of light transmittance of glass
• STB 1126-98 Register of measuring procedures for environmental monitoring. General provisions. Maintenance

AASHTO - American Association of State Highway and Transportation Officials, Range

• R 20-1994 Standard Recommended Practice for Procedures for Measuring Highway Noise

IETF - Internet Engineering Task Force, Range

• RFC 7471-2015 OSPF Traffic Engineering (TE) Metric Extensions
• RFC 3970-2005 A Traffic Engineering (TE) MIB
• RFC 8570-2019 IS-IS Traffic Engineering (TE) Metric Extensions
• RFC 7810-2016 IS-IS Traffic Engineering (TE) Metric Extensions
• RFC 5543-2009 BGP Traffic Engineering Attribute
• RFC 5151-2008 Inter-Domain MPLS and GMPLS Traffic Engineering - Resource Reservation Protocol-Traffic Engineering (RSVP-TE) Extensions
• RFC 5305-2008 IS-IS Extensions for Traffic Engineering
• RFC 5712-2010 MPLS Traffic Engineering Soft Preemption
• RFC 6119-2011 IPv6 Traffic Engineering in IS-IS

GOSTR, Range

• GOST R 58606-2019 Systems and software engineering. Measurement process
• GOST 8.587-2019 State system for ensuring the uniformity of measurements. Mass of oil and oil products. Measurement procedures

AENOR, Range

• UNE-ISO/IEC 15939:2009 Systems and software engineering. Measurement process
• UNE-EN 61810-7:2007 Electromechanical elementary relays -- Part 7: Test and measurement procedures (IEC 61810-7:2006)

Danish Standards Foundation, Range

• DS/ISO/IEC 15939:2007 Systems and software engineering - Measurement process
• DS/ISO 12124:2002 Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids
• DS/EN 61810-7:2006 Electromechanical elementary relays – Part 7: Test and measurement procedures
• DS/ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
• DS/ISO 362:1984 Acoustics. Measurement of noise by accelerating road vehicles. Engineering method. Amendment 1
• DS/EN 13402-1:2001 Size designation of clothes - Part 1: Terms, definitions and body measurement procedure
• DS/EN 482:2012 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
• DS/EN 50632-2-6:2020 Electric motor-operated tools – Dust measurement procedure – Part 2-6: Particular requirements for hammers
• DS/EN 50632-2-19:2021 Electric motor-operated tools – Dust measurement procedure – Part 2-19: Particular requirements for jointers
• DS/EN 50632-2-14:2021 Electric motor-operated tools – Dust measurement procedure – Part 2-14: Particular requirements for planers
• DS/EN 50632-2-5:2021 Electric motor-operated tools – Dust measurement procedure – Part 2-5: Particular requirements for circular saws
• DS/EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
• DS/ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements

Canadian Standards Association (CSA), Range

• CAN/CSA-ISO/IEC 15939:2008 Systems and software engineering - Measurement process
• CSA ISO/IEC 15939-08-CAN/CSA:2008 Systems and software engineering ?Measurement process
• CSA Z107.56-94-1994 Procedures for the Measurement of Occupational Noise Exposure General Instruction No 1 R(1999)
• CSA ISO/IEC 15939-04 CAN/CSA:2004 Software engineering Software measurement process ISO/IEC 15939:2002
• CSA Z107.51-M1980-1980 Procedure for In-Situ Measurement of Noise from Industrial Equipment General Instruction No 1 R(1999)
• CSA C380-2011 Mode opératoire pour mesurer la consommation d’énergie des décodeurs (Deuxième édition; Mise à jour no 1: Ao?t 2012)

ZA-SANS, Range

• SANS 15939:2009 Systems and software engineering - Measurement process
• SANS 15939:2002 Software engineering — Software measurement process

国家能源局, Range

• NB/T 10104-2018 Offshore wind farm engineering measurement procedures
• NB/T 10684-2021 Wind farm engineering quality management procedures
• NB/T 35109-2018 Three-dimensional laser scanning measurement procedures for hydropower projects

Society of Motion Picture and Television Engineers (SMPTE), Range

• SMPTE RP 192-2003 Jitter Measurement Procedures in Bit-Serial Digital Interfaces
• SMPTE RP 192-2015 Jitter Measurement Procedures In Bit-Serial Digital Interfaces

Professional Standard - Aerospace, Range

• QJ 1022-1986 Accuracy grade and range series of pressure sensor

AT-ON, Range

• ONORM A 8060-1980 Body dimensions of people; terms and definitions; Measuring procedures, measuring instruments, values

Korean Agency for Technology and Standards (KATS), Range

• KS X ISO/IEC 15939-2005(2020) Software engineering－Software measurement process
• KS C 8533-1995 Measuring procedure of power conditioner efficiency for photovoltaic systems
• KS C IEC 61683:2005 Photovoltaic systems－Power conditioners－Procedure for measuring efficiency
• KS C IEC 61683-2005(2020) Photovoltaic systems－Power conditioners－Procedure for measuring efficiency
• KS C 8009-1975(2019) Measuring procedures for light intensity distribution of reflectors for lighting fittings
• KS C IEC 60534-2-4-2004(2009) Industrial-process control valves－Part 2：Flow capacity－Section 4：Inherent flow characteristics and rangeability
• KS D 0290-2009 Soil resistivity measurement procedure for corrosivity estimation of buried metal structure
• KS C IEC 61810-7-2015(2020) Electromechanical elementary relays — Part 7: Test and measurement procedures
• KS X ISO/IEC 15939:2005 Software engineering-Software measurement process
• KS C IEC 61810-7:2004 Electromechanical all-or-nothing relays-Part 7:Test and measurement procedures
• KS C IEC 61810-7:2015 Electromechanical elementary relays — Part 7: Test and measurement procedures
• KS K 0592-2016(2021) Test method for water resistance of coated cloth：High range, hydrostatic pressure method
• KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
• KS S ISO 25639-2-2009(2019) Exhibitions, shows, fairs and conventions－Part 2：Measurement procedures for statistical purposes
• KS I ISO 3724:2009 Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using particulate contaminant
• KS B ISO 29944:2015 Powered industrial trucks and tractors — Brake performance — Determination of measurement procedures
• KS I ISO 20581:2020 Workplace air ― General requirements for the performance of procedures for the measurement of chemical agents
• KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
• KS B ISO 29944-2015(2020) Powered industrial trucks and tractors — Brake performance — Determination of measurement procedures
• KS C 8535-1995 Measuring procedure of photovoltaic system performance
• KS Q ISO 10012-2004(2019) Quality management systems－Requirements for measurement processes and measuring equipment
• KS X 6801-14-2005 Quality evaluation procedures
• KS F ISO 10140-4:2016 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements

Professional Standard - Nuclear Industry, Range

• EJ/T 1130-2001 Determination instruction on Po
• EJ/T 1133-2001 Regulations for measurement of radon in water
• EJ/T 1094-1999 Measurement rules on uranium and radium equilibrium coefficient

未注明发布机构, Range

• BS 1365:1990(2007) Specification for Short - range short - stem thermometers
• NB/T 51025-2014 Measurement procedures for coal resource exploration projects
• DIN EN 482:1994 Workplace atmosphere – General requirements for procedures for measuring chemical agents

International Electrotechnical Commission (IEC), Range

• IEC 61683:1999 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
• IEC PAS 63083:2017 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices
  
• IEC 63241-1:2023 Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements
• IEC 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
• IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
• IEC 61018:1991 High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
• IEC 61300-3-6/AMD1:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss; Amendment 1

PT-IPQ, Range

• NP 57-1988 Essential oils Determination of relative density (reference method)
• NP 4423-2003 Acoustics Description and measurement of environmental noise Specific measuring procedures
• NP 1756-1981

Institute of Electrical and Electronics Engineers (IEEE), Range

• IEEE 475-2000 Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
• ANSI/IEEE Std 475-1983 IEEE Standard Measurement Procedure for Field-Disturbance Sensors (rf Intrusion Alarms)
• ANSI/IEEE 152-1953 IEEE Recommended Practice for Volume Measurements of Electric Speech and Program Waves
• IEEE/ISO/IEC 15939-2017 ISO/IEC/IEEE International Standard - Systems and software engineering--Measurement process
• ISO/IEC/IEEE 15939:2017(E) ISO/IEC/IEEE International Standard - Systems and software engineering--Measurement process
• ISO/IEC/IEEE 15939:2017(E) - Redline Iso/iec/ieee international standard - systems and software engineering--measurement process
• ISO/IEC/IEEE DIS P15939, August 2015 ISO/IEC/IEEE Draft Standard - Systems and software engineering - Measurement process

European Committee for Standardization (CEN), Range

• prEN 482-1991 General requirements for the performance of procedures for workplace measurements
• prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
• EN ISO 8655-8:2022 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022)
• EN 482:2012+A1:2015 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
• EN 482:2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
• prEN 675-1992 Measuring procedures for the determination of the thermal transmittance (U value) of multiple glazing (heat flow meter method)
• prEN ISO 10012 rev Measurement management systems - Requirements for measurement processes and measuring equipment

National Metrological Technical Specifications of the People's Republic of China, Range

• JJF 1911-2021 Calibration Specification for Large-scale Bulk Material Silo Weighing Devices

KP-CSK, Range

• KPS 10882-2002 Size designation of clothes-Definitions and body measurement procedure

Association Francaise de Normalisation, Range

• NF EN 61683:2000 Systèmes photovoltaïques - Conditionneurs de puissance - Procédure de mesure du rendement
• NF X43-277:1994 Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents.
• NF C75-132-1/A2*NF EN 50632-1/A2:2021 Electric motor-operated tools - Dust measurement procedure - Part 1 : general requirements
• NF C75-132-1*NF EN 50632-1:2016 Electric motor-operated tools - Dust measurement procedure - Part 1 : general requirements
• NF C75-132-1/A1*NF EN 50632-1/A1:2019 Electric motor-operated tools - Dust measurement Procedure - Part 1 : general requirements
• NF EN 50632-1:2016 Outils électriques à moteur - Procédure de mesure de la poussière - Partie 1: exigences générales
• NF EN ISO 8655-7:2022 Appareils volumétriques à piston - Partie 7 : Modes opératoires de mesure alternatifs pour la détermination de volumes
• NF G03-001:2001 Size designation of clothes - Part 1 : terms, definitions and body measurement procedure.
• NF X43-277:2012 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents.
• NF X43-277:2015 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
• NF X43-277/IN1:2015 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
• FD H96-417*FD ISO/TR 29944:2010 Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures
• NF C75-132-2-6/A2*NF EN 50632-2-6/A2:2020 Electric motor-operated tools - Dust measurement procedure - Part 2-6 : particular requirements for hammers
• NF C75-132-2-5/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-5 : particular requirements for circular saws
• NF C75-132-2-14*NF EN 50632-2-14:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-14 : particular requirements for planers
• NF C75-132-2-5*NF EN 50632-2-5:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-5 : particular requirements for circular saws
• NF C75-132-2-6*NF EN 50632-2-6:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-6 : particular requirements for hammers
• NF EN 50632-1/A1:2019 Outils électriques à moteur - Procédure de mesure de la poussière - Partie 1 : exigences générales
• NF EN 50632-1/A2:2021 Outils électriques à moteur - Procédure de mesure de la poussière - Partie 1 : exigences générales
• FD ISO/TR 29944:2010 Chariots de manutention et tracteurs industriels automoteurs - Capacité de freinage - Détermination des modes opératoires de mesure
• NF S31-049-4*NF EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements

Professional Standard - Textile, Range

• FZJ 120-1993 Procedures for measurement in construction projects for textile industry and regulations on contents

US-FCR, Range

• FCR COE ER 1110-2-1455-1984 COOPERATIVE STREAM GAGING PROGRAM (REPORTS CONTROL SYMBOL, DAEN-CWH-3)

Professional Standard - Machinery, Range

• JB/T 3703.2-1995 Procedures for testing and measuring small sized universal electromagnetic relays
• JB/T 9233.19-1999 General methods of testing the performance of industrial process measurement and control instruments.Zero and span adjuctable range

(U.S.) Telecommunications Industries Association , Range

• TIA-902.CBAA-2007 Public Safety Wideband Data Equipment Performance Measurement Procedures (IOTA)
• TIA-455-71A-1999 FOTP-71 Procedure to Measure Temperature- Shock Effects on Fiber Optic Components
• TIA-470.310-C-2004 Telecommunications ?Telephone Terminal Equipment ?Cordless Telephone Range Measurement Procedures
• TIA-4953-A-2015 Telecommunications Communications Products Amplified Telephone Measurement Procedures and Performance Requirements
• TIA-1083-B-2015 Telecommunications Communications Products Handset Magnetic Measurement Procedures and Performance Requirements
• TIA-1083-A-2010 Telecommunications Telephone Terminal Equipment Handset Magnetic Measurement Procedures and Performance Requirements
• TIA-902.CAAA-2003 Radio Communications ?Public Safety Wideband Data Equipment ?Performance Measurement Procedures
• TIA-455-64-1998(2002) FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
• TIA-455-64-1998 FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
• TIA-4953-2012 Telecommunications Telephone Terminal Equipment Amplified Telephone Measurement Procedures and Performance Requirements

Professional Standard - Hygiene , Range

• WS/T 362-2011 Reference measurement procedure for serum cholesterol.Spectrophotometry

ISA - International Society of Automation, Range

• ISA 92.06.01-1998 Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale)
• ISA 92.02.01 PART I-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)
• ISA 75.01-1985 Flow Equations for Sizing Control Valves

IN-BIS, Range

• IS 5111-1969
• IS 2334-1975
• IS 4241-1990

Professional Standard - Non-ferrous Metal, Range

• YS 5228-1995 Code for operation of engineering surveying
• YS 5228-1995(条文说明) Engineering Survey Operation Procedures
• YS/T 5228-2022 Specification for operation of engineering surveying
• YSJ 415-1993 Specification for nonferrous metal survey

Beijing Provincial Standard of the People's Republic of China, Range

• DB11/T 339-2016 Engineering Survey Technical Regulations
• DB11/T 641-2018 Regulations on Quality Warranty of Residential Projects
• DB11/T 339-2006 Beijing technical regulations for engineering survey
• DB11/ 641-2009 Regulations on Quality Warranty of Commodity Housing Projects

American Society for Testing and Materials (ASTM), Range

• ASTM D3648-03 Standard Practices for the Measurement of Radioactivity
• ASTM F3460-21 Standard Test Method for Seam Measurement Procedure for Baseballs and Softballs
• ASTM F946-85(1996) Standard Guide for Establishing Security Seal Control and Accountability Procedures
• ASTM F946-85(2004) Standard Guide for Establishing Security Seal Control and Accountability Procedures
• ASTM F946-85(2010) Standard Guide for Establishing Security Seal Control and Accountability Procedures

CN-STDBOOK, Range

• 图书 A-4737 Industrial Metrology Engineering

国家林业和草原局, Range

• LY/T 3196-2020 Bamboo Forest Carbon Measurement Procedure
• LY/T 3197-2020 Carbon measurement procedures for bamboo products

US-RTCA, Range

• RTCA DO-155-1974 MINIMUM PERFORMANCE STANDARDS AIRBORNE LOW-RANGE RADAR ALTIMETERS

ES-UNE, Range

• UNE-CEN/CLC/TR 17602-80-04:2021 Space product assurance - Software metrication programme definition and implementation (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN 50632-1:2015/A2:2021 Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements (Endorsed by Asociación Española de Normalización in February of 2022.)
• UNE-EN 50632-1:2015/A1:2019 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements (Endorsed by Asociación Española de Normalización in June of 2019.)
• UNE-EN 50632-1:2015 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirement
• UNE-EN 62496-2-2:2011 Optical circuit boards - Test and measurement procedures -- Part 2-2: Measurements: Dimensions of optical circuit boards (Endorsed by AENOR in July of 2011.)
• UNE-EN ISO 8655-7:2022 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022, Corrected version 2023-01)
• UNE-EN 50632-2-6:2015/A2:2020 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers (Endorsed by Asociación Española de Normalización in January of 2021.)
• UNE-EN 50632-2-14:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers (Endorsed by AENOR in September of 2016.)
• UNE-EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
• UNE-EN 50632-2-5:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws (Endorsed by AENOR in September of 2016.)
• UNE-EN 50632-2-14:2016/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN 50632-2-5:2016/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN 50632-2-19:2016/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers (Endorsed by Asociación Española de Normalización in November of 2021.)
• UNE-EN 50632-2-6:2015/A1:2019 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers (Endorsed by Asociación Española de Normalización in January of 2020.)
• UNE-EN 50632-2-19:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers (Endorsed by AENOR in September of 2016.)
• UNE-EN ISO 10012:2003 ERRATUM Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)

NO-SN, Range

• NS 2129-1994 Offshore installations Weights engineering Requirements for weight reports
• NS 2128-1994 Offshore installations Weights engineering Terminology

国家市场监督管理总局、中国国家标准化管理委员会, Range

• GB/T 21711.7-2018 Electromechanical elementary relays—Part 7:Test and measurement procedures
• GB/T 19322.1-2021 Small craft—Airborne sound emitted by powered recreational craft—Part 1：Pass-by measurement procedures
• GB/T 41451-2022 Specifications for indoor space mobile mapping

International Telecommunication Union (ITU), Range

• ITU-R P.2001 SPANISH-2012 A general purpose wide-range terrestrial propagation model in the frequency range 30 MHz to 50 GHz
• ITU-R REPORT SM.2125-2007 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• ITU-R REPORT SM.2125 ARABIC-2007 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• ITU-R REPORT SM.2125 CHINESE-2007 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• ITU-R REPORT SM.2125 RUSSIAN-2007 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• ITU-R SM.1837-1-2013 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers
• ITU-T E.701 FRENCH-1992 REFERENCE CONNECTIONS FOR TRAFFIC ENGINEERING
• ITU-T E.701 SPANISH-1992 REFERENCE CONNECTIONS FOR TRAFFIC ENGINEERING
• ITU-R REPORT SM.2125-1-2011 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• ITU-T P.862.3-2005 (Pre-Published) Application guide for objective quality measurement based on Recommendations P.862, P.862.1 and P. 862.2

European Committee for Electrotechnical Standardization（CENELEC）, Range

• EN 61683:2000 Photovoltaic Systems - Power Conditioners - Procedure for Measuring Efficiency
• EN 50632-1:2015 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements
• EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
• EN 50632-2-5:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws
• EN 50632-2-14:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers

NEMA - National Electrical Manufacturers Association, Range

• NEMA MS 4-1989 Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging Devices
• NEMA MS 4-1998 Acoustic Noise Measurement Procedure for Diagnosing Magnetic Resonance Imaging Devices
• NEMA MS 4-2006 Acoustic Noise Measurement Procedure for Diagnosing Magnetic Resonance Imaging Devices

CENELEC - European Committee for Electrotechnical Standardization, Range

• EN 50632-1:2015/PRAA:2018 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements
• EN 50632-2-6:2015/PRA1:2018 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Range

• REPORT SM.2125-2007 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
• REPORT SM.2125-1-2011 Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations

Professional Standard - Electricity, Range

• DL/T 5138-2014 Code for digital photogrammetry in electric power engineering

Professional Standard - Construction Industry, Range

• JGJ/T 8-1997 Specifications for deformation measurement of buildings

Association of German Mechanical Engineers, Range

• VDI/VDE 2630 Blatt 1.4-2010 Computed tomography in dimensional metrology - Measurement procedure and comparability

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Range

• IEEE 475-1983 Standard Measurement Procedure for Field-Disturbance Sensors (rf Intrusion Alarms)
• IEEE 15939-2017 Systems and software engineering - Measurement process (IEEE Computer Society)

National Health Commission of the People's Republic of China, Range

• WST 362:2011 Serum cholesterol reference measurement procedure spectrophotometry (obsolete)

KR-KS, Range

• KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
• KS I ISO 20581-2020 Workplace air ― General requirements for the performance of procedures for the measurement of chemical agents
• KS D 0290-2018(2023) Soil resistivity measurement procedure for corrosivity estimation of buried metal structure

Hebei Provincial Standard of the People's Republic of China, Range

• DB13/T 2801-2018 Water Conservancy Engineering Quality Supervision Regulations

Sichuan Provincial Standard of the People's Republic of China, Range

• DB51/T 2201-2016 Water Conservancy Engineering Quality Supervision Regulations
• DB51/T 2793-2021 Expressway Laser Measurement Regulations

Henan Provincial Standard of the People's Republic of China, Range

• DB41/T 1297-2016 Water Conservancy Engineering Quality Supervision Regulations

Anhui Provincial Standard of the People's Republic of China, Range

• DB34/T 2289-2021 Water Conservancy Engineering Quality Supervision Regulations
• DB34/T 2290-2022 Water Conservancy Engineering Quality Inspection Regulations
• DB34/T 2289-2015 Water Conservancy Engineering Quality Supervision Regulations
• DB34/T 2290-2015 Water Conservancy Engineering Quality Inspection Regulations
• DB34/T 4253-2022 Regulations for Quality Supervision of Highway and Waterway Engineering

Professional Standard - Petroleum, Range

• SY/T 5416-1997 Operation rules of measurement while drilling service

CZ-CSN, Range

• CSN 01 1405-1987 Vibration. Permissible values and general requirements for measurement procedu?e in communal environment

NZ-SNZ, Range

• AS/NZS 4308:2008 Procedures for specimen collection and the detection and quantitation of drugs of abuse in urine
• NZS 4224:1983 MEASUREMENT OF CIVIL ENGINEERING QUANTITIES

国家药监局, Range

• YY/T 1675-2019 Serum Electrolytes (Potassium, Sodium, Calcium, Magnesium) Reference Measurement Procedure (Ion Chromatography)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Range

• ITU-T E.736-1997 Methods for Cell Level Traffic Control in B-ISDN - Series E: Overall Network Operation@ Telephone Service@ Service Operation and Human Factors Quality of Service@ Network Management and Traffic Engineering - Traffic Engineering - ISDN Traffic Engineering
• ITU-T E.736 CORR-1998 Methods for Cell Level Traffic Control in B-ISDN - Series E: Overall Network Operation@ Telephone Service@ Service Operation and Human Factors Quality of Service@ Network Management and Traffic Engineering - Traffic Engineering - ISDN Traffic Engineering

BE-NBN, Range

• NBN-EN 482-1994 Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents

Instrument Society of America (ISA), Range

• ISA 75.11.01-1985 Inherent Flow Characteristic and Rangeability of Control Valves Formerly ISA - S75.11 - 1985 (R1997)

CEN - European Committee for Standardization, Range

• EN 482:1994 Workplace Atmospheres - General Requirements for the Performance of Procedures for the Measurement of Chemical Agents
• EN 482:2006 Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents

IEC - International Electrotechnical Commission, Range

• PAS 63083-2017 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices (Edition 1.0)

Lithuanian Standards Office , Range

• LST EN 482-2012 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
• LST EN 50632-2-6/A2-2021 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers
• LST EN 61810-7-2006 Electromechanical elementary relays -- Part 7: Test and measurement procedures (IEC 61810-7:2006)

American Society of Quality Control （ASQC), Range

• ASQ Q10012-2003 Measurement management systems Requirements for measurement processes and measuring equipment T810
• ASQ T810-2003 Measurement management systems Requirements for measurement processes and measuring equipment

Professional Standard - Geology, Range

• DZ/T 0145-2017 Soil Geochemical Survey Regulations

Defense Logistics Agency, Range

• DLA QPL-29-53-2006 RESISTORS, FIXED, METER MULTIPLIER, EXTERNAL (HIGH VOLTAGE, FERRULE TERMINAL TYPE)

PL-PKN, Range

• PN-EN 50632-2-6-2016-02/A2-2021-10 E Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

卫生健康委员会, Range

• WS/T 617-2018 Aspartate aminotransferase catalytic activity concentration reference measurement procedure

Professional Standard - Water Conservancy, Range

• SL 336-2006 Assessment code of practice for quality of soil and water conservation engineering

Jiangxi Provincial Standard of the People's Republic of China, Range

• DB36/T 1039-2018 Water Conservancy Construction Engineering Quality Supervision Regulations

国家煤矿安全监察局, Range

• MT/T 5015-1996 Quality Inspection Regulations for Anchor Shotcrete Support Projects

IT-UNI, Range

• UNI EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements

Others:   Range, Standard range, range standard, Calibration range, Standard range, Accuracy range, range meter, Instrument range, high range, Plug gauge range, range dose, UV range, Range Range, Meter range, range, Lao range, Large range, Measuring range, Calibration range, range number.