ZH

RU

ES

The principle of density meter method to determine the density of oil products

The principle of density meter method to determine the density of oil products, Total:496 items.

In the international standard classification, The principle of density meter method to determine the density of oil products involves: Petroleum products in general, Petroleum, petroleum products and natural gas handling equipment, Crude petroleum, Fuels, Analytical chemistry, Equipment for petroleum and natural gas industries, Natural gas, Road engineering, Measurement of volume, mass, density, viscosity, Organic chemicals, Raw materials for rubber and plastics, Lubricants, industrial oils and related products, Powder metallurgy, Waxes, bituminous materials and other petroleum products, Construction materials, Refractories, Non-ferrous metals, Products of the chemical industry, Paints and varnishes, Fruits. Vegetables, Milk and milk products, Materials for the reinforcement of composites, Metalliferous minerals, Products of the textile industry, Headgear. Clothing accessories. Fastening of clothing, Cereals, pulses and derived products, Sugar. Sugar products. Starch, Plastics, Shipbuilding and marine structures in general, Textile fibres, Metrology and measurement in general, Beverages, Soil quality. Pedology, Protection against dangerous goods, Non-destructive testing, Rubber, Paper and board, Vocabularies, Test conditions and procedures in general, Quality, Photography, Ferroalloys, Testing of metals, Optics and optical measurements, Glass.


Association Francaise de Normalisation, The principle of density meter method to determine the density of oil products

  • NF T60-101*NF EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.
  • NF EN ISO 12185:1996 Pétroles bruts et produits pétroliers - Détermination de la masse volumique - Méthode du tube en U oscillant.
  • NF EN ISO 3675:1998 Pétrole brut et produits pétroliers liquides - Détermination en laboratoire de la masse volumique - Méthode à l'aréomètre.
  • NF M41-008*NF EN ISO 3993:1995 Liquefield petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method.
  • NF T60-172*NF EN ISO 12185:1996 Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method.
  • NF EN ISO 3993:1995 Gaz de pétrole liquéfiés et hydrocarbures légers - Détermination de la masse volumique ou de la densité relative - Méthode de l'aréomètre sous pression.
  • NF M08-016:2005 Petroleum and liquid petroleum products - Determination of density for metrological purposes - Oscillation frequency method.
  • NF M08-016:2014 Petroleum and liquid petroleum products - Determination of density for metrological purposes - Oscillation frequency method
  • NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
  • NF T60-180:1996 Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods.
  • NF T60-180*NF EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
  • NF EN ISO 3838:2004 Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
  • NF M08-016:1992 Petroleum and liquid petroleum products. Determination of density for metrological purposes. Oscillation frequence method.
  • NF ISO 279:1999 Huiles essentielles - Détermination de la densité relative à 20 degrés Celsius - Méthode de référence.
  • NF T25-008*NF ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
  • NF T51-063:1971 Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics.
  • NF T45-011:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of the refraction constituent. Density.
  • NF EN 993-2/A1:2004 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 2 : détermination de la masse volumique absolue
  • NF EN 993-2:1995 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 2 : détermination de la masse volumique absolue.
  • NF EN ISO 2811-1:2023 Peintures et vernis - Détermination de la masse volumique - Partie 1 : Méthode pycnométrique
  • NF B40-301/A1*NF EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : determination of true density
  • NF G07-150:1984 Textiles. Tests for fabrics. Method for the determination of the surface density.
  • NF T30-028:1989 Paints and varnishes. Determination of the density of varnishes. Areometer method.
  • NF T20-050:1985 Chemical products for industrial use. Determination of density of liquids. Aerometric method.
  • NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF G07-317*NF EN ISO 2060:1995 Textiles. Yarn from packages. Determination of linear density (mass per unit length) by the skein method.
  • NF M07-163*NF EN 16896:2018 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
  • NF EN 16896:2018 Produits pétroliers et produits connexes - Détermination de la viscosité cinématique - Méthode avec le viscosimètre Stabinger
  • NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
  • NF EN 993-17:1999 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 17 : détermination de la masse volumique apparente des matériaux en grains par la méthode au mercure sous vide.
  • NF P94-061-1:1996 Sols : reconnaissance et essais - Détermination de la masse volumique d'un matériau en place - Partie 1 : méthode au gammadensimètre à pointe (à transmission directe).
  • NF T20-053:1985 Produits chimiques à usage industriel - Détermination de la masse volumique des solides en poudre et des liquides - Méthode pycnométrique
  • NF EN ISO 2811-2:2011 Peintures et vernis - Détermination de la masse volumique - Partie 2 : méthode par immersion d'un corps (plongeur)
  • NF EN 23923-2:1993 Poudres métalliques - Détermination de la masse volumique apparente - Partie 2 : méthode du volumètre de scott.
  • NF EN 993-1:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 1 : détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN 993-5:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 5 : détermination de la résistance à l'écrasement
  • NF ISO 6999:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination de la masse volumique - Méthode pycnométrique.
  • NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum

RU-GOST R, The principle of density meter method to determine the density of oil products

  • GOST R 51069-1997 Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
  • GOST 33364-2015 Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer
  • GOST 3900-1985 Petroleum and petroleum products. Methods for determination of density
  • GOST R ISO 3675-2007 Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density
  • GOST R 57037-2016 Petroleum products. Determination of density, relative density and API gravity of liquids by digital density meter
  • GOST ISO 3675-2014 Crude petroleum and liquid petroleum products. Laboratory method for determination of density by hydrometer
  • GOST ISO 3993-2013 Liquefied petroleum gases and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method
  • GOST 18898-1989 Powder products. Methods for determination of density, oil content and porosity
  • GOST 31992.1-2012 Paint materials. Method for determination of density. Part 1. Pyknometer method
  • GOST 33276-2015 Juice products. Methods for determination of relative density
  • GOST R 51462-1999 Dried milk products. Method for determination of bulk density
  • GOST 27700-1988 Alumina. Absolute density determination pycnometer method
  • GOST 16218.6-1993 Smallwares. Method for determination of lineary density of threads
  • GOST 16218.6-1982 Small wares. Method for determination of the thickness (linear density)
  • GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method
  • GOST 5902-1980 Confectionery. Determination methods of pounding degree and density of porous products
  • GOST 24468-1980 Refractory products. Method for determination of apparent density and total porosity of thermal-insulation products
  • GOST 8.195-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring spectral density of radiance, spectral density of radiant intensity, spectral density of irradiance, radiant intensity and irradiance in the wavel
  • GOST R 51619-2000 The alcohol production and raw material for it producing. Method for determination of relative density
  • GOST 25714-1983 Non-destructive control. Acoustic sound method of open porosity, apparent density, density and compression strength testing of refractory articles
  • PNST 131-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
  • GOST R EN 1602-2008 Thermal insulating products for building applications. Method for determination of the apparent density
  • GOST EN 1602-2011 Thermal insulating products in building applications. Method for determination of the apparent density
  • GOST 23627-1989 Haberdashery woven, twisted, knitted, metric and piece articles. Norms of colour fastness and methods of its determination
  • GOST 28656-1990 Liquefied hydrocarbon gases. Calculation method for density and saturated vapours pressure
  • GOST 1929-1987 Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter
  • GOST 14618.10-1978 Essential oils, aromatics and their intermediates. Methods for determination of density and refractive index
  • GOST 18276.4-1988 Machine-made textile floor coverings and carpet products. Method for determination of surface density of bonding
  • GOST 6943.7-1979 Glass textile products. Methods for determination of linear dimensions, surface and linear density
  • GOST 29030-1991 Fruit and vegetable products. Pycnometric method for determination of relative density and soluble solids content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The principle of density meter method to determine the density of oil products

  • GB/T 1884-2000 Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method
  • GB/T 2540-1981 Petroleum products--Determination of density by pycnometer
  • GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
  • GB/T 2013-2010 Standard test method for density of liquid petrochemical products
  • GB/T 15243-1994 Viscous oil products of coal carbonization--Determination of density
  • GB/T 13377-2010 Crude petroleum and liquid or solid petroleum products.Determination of density or relative density.Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
  • GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products--Determination of density or relative density--Capillary stoppered pyknometer and graduated bicapillary pyknometer method
  • GB/T 13216.5-1991 Test methods for glycerines--Determination of density at 20℃
  • GB/T 3171.2-1982 Determination of apparent density of aluminum powder--Volume meter method
  • GB/T 4743-2009 Textiles-Yarn from packages-Determination of linear density (mass per unit length) by the skein method
  • GB/T 13531.4-2013 General methods on determination of cosmetics.Determination of relative density
  • GB/T 21862.5-2008 Paints and varnishes.Determinatio of the density.Part 5:Areometer method
  • GB/T 26310.1-2010 Carbonaceous materials used in the production of aluminium.Calcined coke.Part 1:Determination of the density in xylene.Pyknometric method
  • GB/T 6683.3-2023 Precision of measurement methods and results for petroleum and related products - Part 3: Monitoring and verification of published precision data for test methods
  • GB/T 5060-1985 Metallic powders--Determination of apparent density--Part 2: Scott volumeter method
  • GB/T 1479.2-2011 Metallic powders—Determination of apparent density—Part 2:Scott volumeter method
  • GB/T 20432.12-2008 Photography.Photographic-grade chemicals.Test methods.Part 12:Determination of density
  • GB/T 26930.3-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 3: Determination of density.Pyknometric method

Korean Agency for Technology and Standards (KATS), The principle of density meter method to determine the density of oil products

  • KS M 2002-2011 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
  • KS M 2002-1986 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
  • KS M ISO 3675-2017(2022) Crude and liquid petroleum products - Laboratory determination of density - Hydrometer method
  • KS M ISO 12185:2003 Crude petroleum and petroleum products-Determination of density-Oscillating U-tube method
  • KS M ISO 12185-2003(2018) Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
  • KS M ISO 3675:2017 Crude and liquid petroleum products - Laboratory determination of density - Hydrometer method
  • KS M ISO 3993-2003(2018)
  • KS M ISO 3838:2011 Crude petroleum and liquid or solid petroleum products-Determination of density or relative density-Capillary-stopped pyknometer and graduated bicapillary pyknometer methods
  • KS M ISO 3838-2011(2021) Crude petroleum and liquid or solid petroleum products —Determination of density or relative density — Capillary stopped pyknometer and graduated bicapillary pyknometer methods
  • KS M ISO 3838-2011(2016) Crude petroleum and liquid or solid petroleum products —Determination of density or relative density — Capillary stopped pyknometer and graduated bicapillary pyknometer methods
  • KS M ISO 3993:2003 Liquefied petroleum products gas and light hydrocarbons-Determination of density or relative density-Pressure hydrometer method
  • KS H ISO 279-2014(2019) Essential oils — Determination of relative density at 20 degrees C — Reference method
  • KS H ISO 279:2011 Essential oils-Determination of relative density at 20 ℃-Reference method
  • KS H ISO 279:2014 Essential oils — Determination of relative density at 20 degrees C — Reference method
  • KS M ISO 4259:2009 Petroleum products-Determination and application of precision data in relation to methods of test
  • KS K ISO 23733:2009 Textiles-Chenille yarns-Test method for the determination of linear density
  • KS K ISO 23733:2014 Textiles — Chenille yarns — Test method for the determination of linear density
  • KS F 2347-2018 Standard test method for insite density of soil by the rubber-balloon method
  • KS K ISO 23733:2021 Textiles — Chenille yarns — Test method for the determination of linear density
  • KS K ISO 2060:2012 Textiles-Yarn from packages-Determination of linear density (mass per unit length) by the skein method
  • KS M ISO 23581:2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
  • KS M ISO 901:2003 Aluminium oxide primarily used for the production of aluminium-Determination of absolute density-Pyknometer method
  • KS M ISO 10349-12-2002(2017) Photography-Photographic-grade chemicals-Test methods-Part 12:Determination of density
  • KS K ISO 2060:2019 Textiles — Yarn from packages — Determination of linear density(mass per unit length) by the skein method
  • KS M ISO 10349-12-2002(2022) Photography-Photographic-grade chemicals-Test methods-Part 12:Determination of density
  • KS D ISO 3923-2:2001 Method for determination of apparent density of metal powers-Scott volumeter method
  • KS D ISO 3923-2:2013 Method for determination of apparent density of metal powers-Scott volumeter method

European Committee for Standardization (CEN), The principle of density meter method to determine the density of oil products

  • EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
  • EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
  • prEN ISO 12185 Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022)
  • EN ISO 3993:1995 Liquefied Petroleum Gas and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method; (ISO 3993 : 1984)
  • EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
  • prEN 993-1-1993 Methods of test for dense shaped refractory products; part 1: determination of bulk density, apparent porosity and true porosity
  • EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
  • prEN 237-1985 Liquid petroleum products; determination of low lead concentrations; atomic absorption spectrometric methode
  • EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
  • EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • EN 993-6:1995 Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperatur
  • EN 993-10:1997 Methods of Test for Dense Shaped Refractory Products - Part 10: Determination of Permanent Change in Dimensions on Heating
  • EN ISO 2060:1995 Textiles - Yarn from Packages - Determination of Linear Density (Mass per Unit Length) by the Skein Method (ISO 2060 : 1994)

German Institute for Standardization, The principle of density meter method to determine the density of oil products

  • DIN EN ISO 3675:1999 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998
  • DIN EN ISO 12185:2022-11 Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022); German and English version prEN ISO 12185:2022 / Note: Date of issue 2022-10-07*Inten...
  • DIN EN ISO 12185:1997 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996
  • DIN EN ISO 3675:1999-11 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998
  • DIN EN ISO 12185:1997-11 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996 / Note: To be replaced by DIN EN ISO 12185 (2022-11).
  • DIN EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
  • DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
  • DIN EN ISO 3993:1995-11 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995
  • DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
  • DIN EN ISO 3838:2004-09 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
  • DIN 52102:2006 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calcualtion of the ratio of density
  • DIN 52102:2013 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
  • DIN EN ISO 3838/A1:2023-07 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023); German and English version EN ...
  • DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
  • DIN EN ISO 2811-3:2011-06 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011); German version EN ISO 2811-3:2011
  • DIN EN ISO 2811-4:2011-06 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011); German version EN ISO 2811-4:2011
  • DIN EN ISO 2811-3:2023-04 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO/DIS 2811-3:2023); German and English version prEN ISO 2811-3:2023 / Note: Date of issue 2023-02-24*Intended as replacement for DIN EN ISO 2811-3 (2011-06).
  • DIN EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
  • DIN EN ISO 2811-1:2023-04 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023); German version EN ISO 2811-1:2023
  • DIN EN ISO 18335:2023 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023
  • DIN EN 16896:2017-02 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter; German version EN 16896:2016 / Note: To be replaced by DIN EN ISO 23581 (2019-03).
  • DIN EN ISO 3993:1995 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995
  • DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN EN ISO 2811-1:2023 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023)
  • DIN ISO 5725-1:1997-11 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
  • DIN EN 993-2/A1:2004-01 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
  • DIN EN ISO 16282:2008-08 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007); German version EN ISO 16282:2008
  • DIN 52102:2012 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calcualtion of the ratio of density
  • DIN EN ISO 2060:1995-04 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994); German version EN ISO 2060:1995

International Organization for Standardization (ISO), The principle of density meter method to determine the density of oil products

  • ISO 3675:1993 Crude pertroleum and liquid petroleum products; laboratory determination of density or relative density; hydrometer method
  • ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
  • ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
  • ISO 3675:1998/AWI Amd 1 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
  • ISO/DIS 12185 Crude petroleum, petroleum products and related products — Determination of density — Oscillating U-tube method
  • ISO/FDIS 12185:2023 Crude petroleum, petroleum products and related products — Determination of density — Oscillating U-tube method
  • ISO/DIS 18335 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
  • ISO 12185:1996/cor 1:2001 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method; Technical Corrigendum 1
  • ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons; Determination of density or relative density; Pressure hydrometer method
  • ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
  • ISO 3838:1983 Crude petroleum and liquid or solid petroleum products; Determination of density or relative density; Capillary-stoppered pyknometer and graduated bicapillary pycnometer methods
  • ISO/FDIS 18335:2023 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
  • ISO 1687:1976 Sodium and potassium silicates for industrial use; Determination of density at 20 degrees C of products in solution; Method using density hydrometer and method using pyknometer
  • ISO 3838:2004/DAmd 1 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
  • ISO 3838:2004/PRF Amd 1:2023 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
  • ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
  • ISO 279:1981 Essential oils — Determination of relative density at 20 degrees C (Reference method)
  • ISO 1973:1976 Textiles; Determination of linear density of fibres; Gravimetric method
  • ISO 23733:2007 Textiles - Chenille yarns - Test method for the determination of linear density
  • ISO 2060:1972 Textiles; Yarn from packages; Determination of linear density (mass per unit length); Skein method
  • ISO 534:1980 Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board)
  • ISO 2060:1994 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
  • ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
  • ISO/FDIS 5725-1 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
  • ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
  • ISO/DIS 23581 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
  • ISO 23581:2020 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
  • ISO/TR 19686-2:2018 Petroleum products — Equivalency of test method determining the same property — Part 2: Density of petroleum products

国家质量监督检验检疫总局, The principle of density meter method to determine the density of oil products

  • SN/T 4432-2016 Determination of Density, Relative Density and API Gravity of Crude Oil and Liquid Petroleum Products Thermohydrometer Method
  • SN/T 2383-2017 Liquid chemical products.Determination of density and relative density.Digital density meter method
  • SN/T 4431-2016 Determination of API gravity of crude oil and petroleum products Hydrometer method

American Society for Testing and Materials (ASTM), The principle of density meter method to determine the density of oil products

  • ASTM D1298-99 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-99e2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D129-64(1978) Standard Test Method for Sulfur In Petroleum Products (General Bomb Method)
  • ASTM D129-95 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
  • ASTM D1298-99(2005) Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-12a Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-12 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D12-88(1998) Hydrometer method to determine the density, relative density and API fuel specific gravity of crude oil and liquid petroleum products
  • ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1298-85(1990)e1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D6822-02 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12a Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D7777-12 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D7777-13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • ASTM D7777-13(2018)e1 Standard test method for measuring liquid petroleum density, relative density, or API fuel specific gravity using a portable density meter/hydrometer
  • ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
  • ASTM D7042-16 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
  • ASTM D1657-12e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1657-02 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1657-12 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1657-12(2017) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1122-16 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM D1122-16(2017)e1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • ASTM D1475-13 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
  • ASTM D1475-98(2008) Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
  • ASTM D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
  • ASTM D5931-13(2017) Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D8045-17(2023) Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
  • ASTM D7042-16e2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-12a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7042-14 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer 40;and the Calculation of Kinematic Viscosity41;
  • ASTM D7042-12e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • ASTM D5931-13 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ASTM D4292-92(1997) Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D4292-17 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D7042-04 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D1475-98 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
  • ASTM D1475-98(2012) Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
  • ASTM D1475-13(2020) Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
  • ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  • ASTM D2950/D2950M-11 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
  • ASTM D4292-10 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
  • ASTM D2950/D2950M-14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
  • ASTM D4292-92(2007) Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D4292-92(2002)e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D1481-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D1481-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  • ASTM D2638-06 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D2638-10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM C559-90(2005) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
  • ASTM F3013-13 Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
  • ASTM D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
  • ASTM D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
  • ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
  • ASTM B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesrsquo; Principle
  • ASTM B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • ASTM D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • ASTM D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

PL-PKN, The principle of density meter method to determine the density of oil products

  • PN C04004-1990 Crude petrolcum and petroleum products Determination of density
  • PN C04404-02-1986 Pigments for paints General methcds of test Determination of density
  • PN C04404-03-1986 Pigments for paints General testing methods Determination of bulk density
  • PN C04052-1965 Petroleum produc?s Spectrophofomeiric determination of aroma?ic hydrocarbons in gasoline
  • PN C04504-1992 Chemical analysis. Determination of density of liquid chemical products and solids in powder

Taiwan Provincial Standard of the People's Republic of China, The principle of density meter method to determine the density of oil products

  • CNS 14474-2000 Method of test for density and relative density of liquids by digital density meter
  • CNS 7405-1981 Method of Test for Density of Paint, Varnish, Lacquer and Related Products

Professional Standard - Energy, The principle of density meter method to determine the density of oil products

  • NB/SH/T 0874-2013 Crude peroleum and liquid petroleum products.Laboratory determination of density.Weighing digital liquid density meter method
  • NB/SH/T 0870-2020 Determination of dynamic viscosity and density of petroleum products and calculation of kinematic viscosity Stabinger viscometer method
  • NB/SH/T 0870-2013 Standard test method for dynamic viscosity and density of liquids by Stabinger viscometer (and the calculation of kinematic viscosity)

Japanese Industrial Standards Committee (JISC), The principle of density meter method to determine the density of oil products

  • JIS K 2249-2:2011 Crude petroleum and petroleum products -- Determination of density -- Part 2: Hydrometer method
  • JIS K 2249-4:2011 Crude petroleum and petroleum products -- Determination of density -- Part 4: Petroleum measurement tables
  • JIS K 2249:1995 Crude petroleum and petroleum products -- Determination of density and petroleum measurement tables based on a reference temperature (15 centigrade degrees)
  • JIS K 2249-1:2011 Crude petroleum and petroleum products -- Determination of density -- Part 1: Oscillating U-tube method
  • JIS K 2249-3:2011 Crude petroleum and petroleum products -- Determination of density -- Part 3: Capillary pyknometer method
  • JIS K 0061:1992 Test methods for density and relative density of chemical products
  • JIS K 2283:2000 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS K 2283:1993 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS R 9301-2-1:1999 Alumina powder -- Part 2: Determination of physical properties -- 1: Absolute density by pyknometer method

Danish Standards Foundation, The principle of density meter method to determine the density of oil products

  • DS/EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
  • DS/EN ISO 12185:1997 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
  • DS/EN ISO 3993:1996 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
  • DS/EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
  • DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • DS/ISO 5725-1/Cor.1:2000 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
  • DS/ISO 3923-2:1994 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method
  • DS/EN ISO 2060:1997 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
  • DS/EN 23923-2:1994 Metallic powders. Determination of apparent density. Part 2: Scott volumeter method
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum

Professional Standard - Petrochemical Industry, The principle of density meter method to determine the density of oil products

  • SH/T 0221-1992 Liquefied Petroleum Gas Density or Relative Density Determination (Pressure Densitometer Method)
  • SH/T 0604-2000 Crude petroleum and petroleum products.Determination of density.Oscillating U-tube Method
  • SH/T 1143-1992 Determination of density or relative density of pyrolysis carbon dioxide for industrial use (pressure float method)

British Standards Institution (BSI), The principle of density meter method to determine the density of oil products

  • BS EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method
  • BS EN ISO 3993:1996 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
  • 22/30461108 DC BS EN ISO 12185. Crude petroleum, petroleum products and related products. Determination of density. Laboratory density meter with an oscillating U tube sensor
  • BS EN ISO 12185:1996 Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
  • BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
  • BS 5711-4:1979 Methods of sampling and test for glycerol - Determination of density and relative density
  • 23/30463813 DC BS EN ISO 18335. Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
  • PD ISO/TR 19686-2:2018 Petroleum products. Equivalency of test method determining the same property. Density of petroleum products
  • BS ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
  • BS ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
  • BS ISO 279:2001 Essential oils - Determination of relative density at 20 °C - Reference method
  • BS EN 993-1:1995 Methods of test for dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
  • BS EN ISO 3838:2004 Methods of test for petroleum and its products. BS 2000-189/190. Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
  • BS EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • BS EN ISO 1973:2021 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
  • BS EN ISO 2811-1:2023 Tracked Changes. Paints and varnishes. Determination of density. Pycnometer method
  • BS EN ISO 2060:1995 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
  • BS 734-2:1959 Measurement of the density of milk using a hydrometer - Methods
  • BS EN 23923-2:1993 Metallic powders. Determination of apparent density. Scott volumeter method
  • BS ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
  • BS EN 993-5:2018 Methods of test for dense shaped refractory products - Determination of cold crushing strength
  • BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
  • BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
  • 23/30463872 DC BS EN ISO 2811-3. Paints and varnishes. Determination of density - Part 3. Oscillation method
  • BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
  • BS EN 993-5:2000 Methods of test for dense shaped refractory products - Determination of cold crushing strength
  • 22/30447823 DC BS EN ISO 2811-1. Paints and varnishes. Determination of density. Part 1. Pycnometer method
  • BS EN 993-12:1997 Methods of test for dense shaped refractory products. Determination of pyrometric cone equivalent (refractoriness)
  • BS ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results - General principles and definitions
  • BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • BS EN 993-6:2018 Methods of test for (dense) shaped refractory products - Determination of modulus of rupture at ambient temperature

PT-IPQ, The principle of density meter method to determine the density of oil products

Group Standards of the People's Republic of China, The principle of density meter method to determine the density of oil products

  • T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method

Professional Standard - Commodity Inspection, The principle of density meter method to determine the density of oil products

  • SN/T 2383-2009 Liquid chemical products.Determination of density and relative density.Digital density meter method
  • SN/T 3518-2013 Determination for kinematic viscosity of petroleum products.Stabinger viscometer
  • SN/T 0735.6-1997 Essential oils, perfumery isolates and synthetics for export.Determination of relative density
  • SN/T 2888-2011 Determination of antimony in high-density polyethylene, a food contact material for export, by atomic fluorescence spectrometry

KR-KS, The principle of density meter method to determine the density of oil products

  • KS M ISO 12185-2003(2023) Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
  • KS M ISO 3675-2017 Crude and liquid petroleum products - Laboratory determination of density - Hydrometer method
  • KS F 2347-2018(2023) Standard test method for insite density of soil by the rubber-balloon method
  • KS K ISO 23733-2014 Textiles — Chenille yarns — Test method for the determination of linear density
  • KS K ISO 23733-2021 Textiles — Chenille yarns — Test method for the determination of linear density
  • KS M ISO 23581-2022 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
  • KS K ISO 2060-2019 Textiles — Yarn from packages — Determination of linear density(mass per unit length) by the skein method

BE-NBN, The principle of density meter method to determine the density of oil products

  • NBN-ISO 3993:1991 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
  • NBN T 03-232-1980 Sodium and potassium silicates for industrial use - Determination of density at 20°C of products in solution - Method using density hydrometer and method using pyknometer

Hebei Provincial Standard of the People's Republic of China, The principle of density meter method to determine the density of oil products

  • DB13/T 1231-2010 Density Determination Method for Chemical Products Intelligent Liquid Density Meter Method

TR-TSE, The principle of density meter method to determine the density of oil products

  • TS 1013-1971 DENSITY, SPECIFIC GRAVITY AND API GRAVITY OF CRUDE PETROLEUM AND PETROLEUM PRODUCTS BY HYDROMETER METHOD

Lithuanian Standards Office , The principle of density meter method to determine the density of oil products

  • LST EN ISO 3675:1999 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
  • LST EN ISO 12185:1999 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
  • LST EN ISO 3993:2001 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984)
  • LST EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
  • LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN ISO 2060:2000 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994)

AENOR, The principle of density meter method to determine the density of oil products

  • UNE-EN ISO 3675:1999 CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS. LABORATORY DETERMINATION OF DENSITY. HYDROMETER METHOD. (ISO 3675:1998).
  • UNE-EN ISO 12185:1999 CRUDE PETROLEUM AND PETROLEUM PRODUCTS. DETERMINATION OF DENSITY. OSCILLATING U-TUBE METHOD (ISO 12185:1996)
  • UNE 84065:1988 COSMETIC RAW MATERIALS. DETERMINATION OF APPARENT DENSITY OF POWDERS
  • UNE-EN ISO 3993:1996 LIQUEFIED PETROLEUM GAS AND LIGHT HYDROCARBONS. DETERMINATION OF DENSITY OR RELATIVE DENSITY. PRESSURE HYDROMETER METHOD. (ISO 3993:1984).
  • UNE-EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
  • UNE 84156:2000 Essential oils. Determination of relative density at 20aC. Reference method.
  • UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
  • UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
  • UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
  • UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
  • UNE-EN ISO 2060:1996 TEXTILES. YARN FROM PACKAGES. DETERMINATION OF LINEAR DENSITY (MASS PER UNIT LENGHT) BY THE SKEIN METHOD. (ISO 2060:1994).
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM

API - American Petroleum Institute, The principle of density meter method to determine the density of oil products

  • API MPMS 9.3-2002 Manual of Petroleum Measurement Standards Chapter 9—Density Determination Section 3—Standard Test Method for Density@ Relative Density@ and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (Second Edition)
  • API MPMS 9.3-1994 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products
  • API MPMS 9.1-2002 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Second Edi
  • API MPMS 9.1-1981 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Hydrometer Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products (ASTM D1298)(R 1992)
  • API MPMS 9.3-2012 Manual of Petroleum Measurement Standards Chapter 9.3 Standard Test Method for Density@ Relative Density@ and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (Third Edition)
  • API STD 2547-1972 Standard Method Of Test for Density@ Specific Gravity or API Gravity Of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • API STD 2547-1970 Standard Method Of Test for Density@ Specific Gravity or API Gravity Of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • API MPMS 9.1-2012 Manual of Petroleum Measurement Standards Chapter 9.1 - Standard Test Method for Density@ Relative Density@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Third Edition)
  • API MPMS 9.2-1982 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 2 - Pressure Hydrometer Test Method for Density or Relative Density (First Edition)
  • API MPMS 9.2-2003 Manual of Petroleum Measurement Standards Chapter 9—Density Determination Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer (Second Edition)
  • API MPMS 9.2-2012 Manual of Petroleum Measurement Standards Chapter 9.2 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer- Measurement Coordination (Third Edition)

AASHTO - American Association of State Highway and Transportation Officials, The principle of density meter method to determine the density of oil products

  • T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • T227-1993 Standard Specification for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Nineteenth Edition; ASTM D1298-85(1990))
  • TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge

NL-NEN, The principle of density meter method to determine the density of oil products

  • NEN 907-1971 Petroleum products. Determination of density by pycnometer
  • NEN 3195-1965 ten behoeve van het meten van tank- en scheepsladingen Petroleum products. Determination of the density at 15 °C for bulk measurements of petro- leum products
  • NEN 958-1971 Determination of density at 20 °C of milk with a density hydrometer (lactometer)
  • NEN 2585-1983 Refractory products - Determination of true density of shaped and unshaped products and raw materials

ES-UNE, The principle of density meter method to determine the density of oil products

  • UNE-EN ISO 3675:1999 ERRATUM:2011 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method. (ISO 3675:1998).
  • UNE-EN ISO 3993:1996 ERRATUM:2011 Liquefied petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method. (ISO 3993:1984).
  • UNE-EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
  • UNE-EN ISO 16282:2008 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) (Endorsed by AENOR in June of 2008.)
  • UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 993-5:2018 Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength (Endorsed by Asociación Española de Normalización in January of 2019.)

Standard Association of Australia (SAA), The principle of density meter method to determine the density of oil products

  • AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
  • AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
  • AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
  • AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
  • AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
  • AS 2341.7:1993 Methods of testing bitumen and related roadmaking products - Determination of density using a density bottle
  • AS 2341.7:1993(R2013)
  • AS/NZS 2891.14.2:2013
  • AS 2341.6:1992 Methods of testing bitumen and related roadmaking products - Determination of density using a hydrometer
  • AS/NZS 2891.14.1.1:2013
  • AS/NZS 2891.14.1.2:2013
  • AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode

CZ-CSN, The principle of density meter method to determine the density of oil products

NZ-SNZ, The principle of density meter method to determine the density of oil products

  • NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
  • NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density

VN-TCVN, The principle of density meter method to determine the density of oil products

  • TCVN 3893-1984 Petroleum and petroleum products.Method for the determination of specific density by areometer
  • TCVN 1753-1986 Woven fabrics.Method for determination of density
  • TCVN 6910-1-2001 Accuracy (trueness and precision) of measurement methods and results.Part 1: General principles and definitions

RO-ASRO, The principle of density meter method to determine the density of oil products

  • STAS 35-1981 CRUDE, OIL LIQUID SEMI-SOLID AND SOLID PETROLEUM PRODUCTS Detcrmination or density
  • SR ISO 3838:1996 Crude petroleum and liquid or solid petroleum products. Determination of density. Capillary - stoppered pyknometer and graduated bicapillary pyknometer methods
  • STAS 10566-1976 RESINS FOR VARNISHES AND PAINTS Determination of density Pyknometer method
  • SR 7184-3-2001 Soil - Determination of density. Pycnometer method using organic solvent

TH-TISI, The principle of density meter method to determine the density of oil products

  • TIS 1182 Pt.3-1994 STANDARD TEST METHODS FOR PETROLEUM AND PETROLEUM PRODUCTS.PART 3 DETERMINATION OF DENSITY,RELATIVE DENSITY OR API GRAVITY-HYDROMETER METHOD
  • TIS 1182.3-1994 Standard test methods for petroleum and petroleum products.part 3: determination of density, relative density or api gravity.hydrometer method
  • TIS 121.6-2009 Standard test methods for textiles.part 6: determination of linear density of yarn

IN-BIS, The principle of density meter method to determine the density of oil products

未注明发布机构, The principle of density meter method to determine the density of oil products

  • BS EN ISO 3993:1996(1999) Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
  • BS EN ISO 3675:1998(2001)*BS 2000-160:1998 Methods of test for petroleum and its products — BS 2000 - 160 : Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
  • DIN EN ISO 4259-1:2020 Petroleum products – Precision of measurement methods and results – Part 1: Determination of precision data of test methods
  • BS ISO 279:1998(2001) Essential oils — Determination of relative density at 20 ºC — Reference method
  • BS EN 993-2:1995(2004) Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density

SE-SIS, The principle of density meter method to determine the density of oil products

  • SIS SS-ISO 3838:1987 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary- stoppered pyknometer and graduated bicapillary pyknometer methods

CU-NC, The principle of density meter method to determine the density of oil products

  • NC 33-28-1984 Oil and Oil Derivatives. Determination of Density. Testing Methods

Professional Standard - Agriculture, The principle of density meter method to determine the density of oil products

  • GB/T 8032-1987 Method for Determination of Density of Coking Benzene Products

国家市场监督管理总局、中国国家标准化管理委员会, The principle of density meter method to determine the density of oil products

  • GB/T 6683.1-2021 Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test

YU-JUS, The principle of density meter method to determine the density of oil products

  • JUS ISO 279:1992 Essential oils. Determination of relative density at 20 degree C (Reference method)
  • JUS H.P5.012-1991 Pesticides.Determination of density. Hydrometer and pyknometer method
  • JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials
  • JUS C.A2.037-1987 Phisical tests ofmetafs. Determination ofapparentdensity ofmetallic povvders. Scott volumeter method
  • JUS B.D8.312-1983 Refractories. Methods of fisical testing. Determination of the bulk deniity, apparent porosity and true porosity of dense shaped refractory products

Professional Standard - Petroleum, The principle of density meter method to determine the density of oil products

  • SY/T 7547-2014 Determination of crude oil yield value by rotational viscometer

Military Standard of the People's Republic of China-General Armament Department, The principle of density meter method to determine the density of oil products

  • GJB 9131-2017 Determination of dynamic viscosity and density of liquids and calculation of kinematic viscosity Stabinger viscometer method

American National Standards Institute (ANSI), The principle of density meter method to determine the density of oil products

  • ANSI/ASTM D5931:1998 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • ANSI/ASTM E1585:1993 Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products using Spectrometric Measurements

GOSTR, The principle of density meter method to determine the density of oil products

  • GOST 24468-2020 Refractory products. Method for determination of apparent density and total porosity of thermal-insulation products
  • GOST 32081-2013 The alcohol production and raw material for it producing. Method for determination of relative density
  • GOST 8.599-2010 State system for ensuring the uniformity of measurements. Density of light petroleum products. The tables for recalculation of density to 15 °С and 20 °С and to conditions of volume's measurement
  • GOST 28656-2019 Liquefied hydrocarbon gases. Calculation method for determination of saturated vapour density and pressure

SG-SPRING SG, The principle of density meter method to determine the density of oil products

  • SS 11 Pt.5-1986 Methods Of Sampling And Test For Oils And Fats Part 5 : Determination Of Relative Density At t/20℃ In Air And Apparent Density (g/ml) In Air Of Fats

Indonesia Standards, The principle of density meter method to determine the density of oil products

  • SNI ISO 2060:2010 Textile - Yarn from packages - Determination of linier density (mass per unit length) by the skein method

AR-IRAM, The principle of density meter method to determine the density of oil products

CEN - European Committee for Standardization, The principle of density meter method to determine the density of oil products

  • EN 993-1:2018 Methods of Test for Dense Shaped Refractory Products - Part 1: Determination of Bulk Density@ Apparent Porosity and True Porosity
  • EN 993-6:2018 Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature

BELST, The principle of density meter method to determine the density of oil products

  • STB 1933-2009 Wine production and wine raw material. Method for determination of relative density

ZA-SANS, The principle of density meter method to determine the density of oil products

  • SANS 2060:1994 Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The principle of density meter method to determine the density of oil products

  • GB/T 35463-2017 Test method for bulk density of wood-plastic composites and products

ES-AENOR, The principle of density meter method to determine the density of oil products

  • UNE 53-636-1991 Rubber and latex. Determination of copper content. Photometric method

BG-BDS, The principle of density meter method to determine the density of oil products

  • BGC EN 23923-2-2001 Metallic powder - Determination of apparent density - Part 2: Scott volumeter method

Professional Standard - Non-ferrous Metal, The principle of density meter method to determine the density of oil products

  • YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
  • YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
  • YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method
  • YS/T 587.10-2006 Calcined coke for prebaked blocks. Testing methods. Part 10: Determination of bulk density (tapped)

工业和信息化部, The principle of density meter method to determine the density of oil products

  • YS/T 587.10-2016 Testing methods for calcined petroleum coke for carbon anodes - Part 10: Determination of tap density




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved