ZH
RU
ES

Main development

Main development, Total:407 items.

In the international standard classification, Main development involves: Machine tools, Mining and quarrying, Mining equipment, Applications of information technology, Vocabularies, Shipbuilding and marine structures in general, Spices and condiments. Food additives, Products of the chemical industry, Aircraft and space vehicles in general, Manufacturing forming processes, Energy and heat transfer engineering in general, Medical sciences and health care facilities in general, Fluid power systems, Road vehicle systems, Geology. Meteorology. Hydrology, Pharmaceutics, Fasteners for aerospace construction, Petroleum, petroleum products and natural gas handling equipment, Farming and forestry, Nuclear energy engineering, Pesticides and other agrochemicals, Fertilizers, Document imaging applications, Wood, sawlogs and sawn timber, Burners. Boilers, Lubricants, industrial oils and related products, Pumps, Linear and angular measurements, Medical equipment, Cutting tools, Rubber and plastics products, Software development and system documentation, Pulps, Water quality, Industrial automation systems, Radiocommunications, Raw materials for rubber and plastics, Technical product documentation, Labour. Employment, Character sets and information coding, Railway rolling stock, Electronic components in general, Inorganic chemicals, Equipment for the chemical industry, Springs, Quality, Packaging materials and accessories, Chipless working equipment, Telecontrol. Telemetering, Welding, brazing and soldering, Company organization and management, Metrology and measurement in general, Galvanic cells and batteries, Sports equipment and facilities, Coals, Analytical chemistry, Power transmission and distribution networks, Installations in buildings, Paper and board.

RU-GOST R, Main development

GOST 9505-1973 Grinding and lapping (honing) vertical machine. Main dimensions
GOST R 51510-1999 Geological research drill rods. Types and main dimensions
GOST 13.1.506-1978 Reprography. Micrography. Cases for microforms. Basic dimensions and technical requirements
GOST 9330-1976 Principal joints of details of wood and wooden materials. Types and dimensions
GOST R 56606-2015 Control technical condition and functioning of medical devices. The main provisions
GOST 13.1.507-1980 Reprography. Micrography. Envelopes for microfiches. Basic dimensions and technical requirements
GOST 13.1.505-1976 Reprography. Micrography. Boxes for microfilm in roll. Main sizes and technical require ments
GOST R 51664-2000 Systems and equipment of radio communication channel automatic control. Main parameters
GOST 10649-1973 Samplers and installations for peat sample preparation. Types and main parameters
GOST 3.1109-1982 Unified system for technological documentation. Terms and definitions of main concepts
GOST R 50643-1994 Brake anti-lock device connection. Main dimensions. Technical requirements and test. Arrangement of the connection on the vehicles
GOST 9931-1985 The cilindrical shells of the steel welded vessels and apparatus. Types, main characteristics and dimensions
GOST 13766-1986 Cylindrical helical compression (tension) springs of I class and of 1 category made of round steel. Main parameters of coils
GOST 13768-1986 Cylindrical helical compression (tension) springs of I class 3 category made of round steel. Main parameters of coils
GOST 13769-1986 Cylindrical helical compression springs of I class and of 4 category made of round steel. Main parameters of coils
GOST 13770-1986 Cylindrical helical compression (tension) springs of II class and of 1 category made of round steel. Main parameters of coils
GOST 13771-1986 Cylindrical helical compression (tension) springs of II class and of 2 category made of round steel. Main parameters of coils
GOST 13773-1986 Cylindrical helical compression springs of II class and of 4 category made of round steel. Main parameters of coils
GOST 13774-1986 Cylindrical helical compression springs of III class and of 1 category made of round steel. Main parameters of coils
GOST 13776-1986 Cylindrical helical compression springs of III class and of 3 category made of round steel. Main parameters of coils
GOST 13.1.111-1989 Reprography. Micrography. Microfishes for scientific reports. General requirements and standards
GOST 13.1.104-1993 Reprography. Micrography. Roll microfilms. Basic dimensions and accommodation of microimages
GOST R 51742-2001 Broadcasting transmitters, fixed AM modulated, ranges of low frequency, mean frequency and high frequency. Main parameters, technical requirements and methods of measurement
GOST R 51725.12-2014 Catalogization of products for federal state needs. The registration order for researchers, manufacturers and suppliers of products for federal state needs

HU-MSZT, Main development

International Telecommunication Union (ITU), Main development

ITU-T I.251. 4 (REV 1)-1992 Calling Line Identification Restriction (Study Group I) 8 pp
ITU-T I.251.4 (REV 1) FRENCH-1992 Calling Line Identification Restriction (Study Group I) 8 pp
ITU-T I.251.4 (REV 1) SPANISH-1992 Calling Line Identification Restriction (Study Group I) 8 pp
ITU-T G.8272-2012 Timing characteristics of primary reference time clocks Study Group 15
ITU-T F.746-2012 Requirements of multimedia optimization control components (Study Group 16)
ITU-T X.1163-2015 Security requirements and mechanisms of peerto- peer-based telecommunication networks (Study Group 17)
ITU-R S.1715-2005 Guidelines developed in response to the studies requested in Resolution 140 (WRC-03)
ITU-T P.810 FRENCH-1996 MODULATED NOISE REFERENCE UNIT (MNRU)
ITU-T P.810 SPANISH-1996 MODULATED NOISE REFERENCE UNIT (MNRU)
ITU-R S.1715 FRENCH-2005 Guidelines developed in response to the studies requested in Resolution 140 (WRC-03)
ITU-T X.1192-2011 Functional requirements and mechanisms for the secure transcoding of IPTV (Study Group 17)
ITU-R F.762-2-1995 Main Characteristics of Remote Control and Monitoring Systems for HF Receiving and Transmitting Stations
ITU-T P.835 CORR 1-2011 Subjective test methodology for evaluating speech communication systems that include noise suppression algorithm Corrigendum 1 (Study Group 12)
ITU-T Q.3610-2009 Signalling requirements and protocol profiles for customized ring-back tone service (Study Group 11)
ITU-T SERIES Q SUPP 17-1999 Technical Report TRQ.2200: Call Control Signalling Requirements - Party Call Control Series Q: Switching and Signalling Study Group 11; 56 pp
ITU-T SERIES Q SUPP 19-1999 Technical Report TRQ.2300: Bearer Control Signalling Requirements - Root-Party Bearer Control Series Q: Switching and Signaling Study Group 11
ITU-T SERIES Q SUPP 20-1999 Technical Report TRQ.2310: Bearer Control Signalling Requirements - Leaf-Party Bearer Control Services Q: Switching and Signalling Study Group 11; 68 pp
ITU-T Q.4002.3-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing – Part 3: User side; Test suite structure and test purposes (Study Group 11)
ITU-T Q.4002.2-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing – Part 2: Network side; Test suite structure and test purposes (Study Group 11)
ITU-T SERIES Q SUPP 12-1999 Technical Report TRQ.2100: Coordinated Call Control and Bearer Control Signalling Requirements - Root-Party Coordinated Call and Bearer Control Study Group 11
ITU-T SERIES Q SUPP 21-1999 Technical Report TRQ.2320: Bearer Control Signalling Requirements - Third-Party Bearer Control Services Q: Switching and Signalling Study Group 11; 48 pp
ITU-T Q.4002.1-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing – Part 1: Network side and user side; Protocol implementation conformance statement (Study Group 11)
ITU-T K.42 FRENCH-1998 Preparation of emission and immunity requirements for telecommunication equipment General principles Study Group 5; 12 pp
ITU-T K.42 SPANISH-1998 Preparation of emission and immunity requirements for telecommunication equipment General principles Study Group 5; 12 pp
ITU-T P.835 AMD 1-2007 Subjective test methodology for evaluating speech communication systems that include noise suppression algorithm Amendment 1: New Appendix III – Additional provisions for nonstationary noise suppressors (Study Group 12)
ITU-T Q.3611-2009 Signalling requirements and protocol profiles for NGN customized ringing tone service Study Group 11

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Main development

ITU-T Y.3324-2018 Requirements and architectural framework for autonomic management and control of IMT-2020 networks (Study Group 13)
ITU-T Y.2239-2016 Requirements for information control networks and related applications (Study Group 13)
ITU-T P.81-1993 Modulated Noise Reference Unit (MNRU) - Telephone Transmission Quality Subjective Opinion Tests (Study Group XII; 8 pp; Cancelled)
SERIES Q SUPP 8-1999 Technical Report TRQ.2400: Transport Control Signalling Requirements - Signalling Requirements for AAL Type 2 Link Control Capability Set 1 (Study Group 11; 21 pp)
ITU-T Y.2320-2015 Requirements for virtualization of control network entities in next generation network evolution (Study Group 13)
ITU-T Y.1345 AMD 1-2014 Management aspects of the Ethernet Transport (ET) capable network element Amendment 1: Updates to the requirements for on-demand and proactive measurements (Study Group 15)
ITU-T G.8051 AMD 1-2014 Management aspects of the Ethernet Transport (ET) capable network element Amendment 1: Updates to the requirements for on-demand and proactive measurements (Study Group 15)
SERIES Q SUPP 12-1999 Technical Report TRQ.2100: Coordinated Call Control and Bearer Control Signalling Requirements - Root-Party Coordinated Call and Bearer Control (Study Group 11)
SERIES Q SUPP 19-1999 Technical Report TRQ.2300: Bearer Control Signalling Requirements - Root-Party Bearer Control Series Q: Switching and Signaling (Study Group 11)
SERIES Q SUPP 33-2000 Technical Report TRQ.2401: Transport Control Signalling Requirements - Signalling Requirements for AAL Type 2 Link Control Capability Set 2 Series Q: Switching and Signalling (Study Group 11)
SERIES Q SUPP 42-2003 Technical Report TRQ.2402: Transport control signalling requirements – Signalling requirements for AAL type 2 link control Capability Set 3 SERIES Q: SWITCHING AND SIGNALLING (Study Group 11)
SERIES Q SUPP 17-1999 Technical Report TRQ.2200: Call Control Signalling Requirements - Party Call Control Series Q: Switching and Signalling (Study Group 11; 56 pp)
SERIES Q SUPP 20-1999 Technical Report TRQ.2310: Bearer Control Signalling Requirements - Leaf-Party Bearer Control Services Q: Switching and Signalling (Study Group 11; 68 pp)

RO-ASRO, Main development

STAS 11222-1986 HRAKE TUBS Main dimensions
STAS 12852-1990 Tonguing bars by pulling. Main dimensions
STAS 11798-1980 Moulding and core-making equipment CORE MAKING MACHINES Main parameters
STAS 11793-1980 Equipment for moulding sand preparation JAW AND ROTOR CLOD GRINDING MACHINE Main parameters
STAS 11734-1980 DRAWING HYDRAULIC PRESSE Main parameters
STAS 10231-1989 Retrigeratinge quipment AIR-CONDITIONING DEVICES Main parameters
STAS 11790-1980 Moulding sand preparation equipment AIR BLOWERS Mains parameters
STAS 10067-1984 Refrigerating equipment SHELL-TYPE COOLING TOWERS Main parameters
STAS 9960-1991 Refrigerating equipment recipients for refrigerating agents and oi. Main parameters
STAS 12793-1989 CHOCKS WITH AXIAL REGULATION FOR SIDE AND FACE MILLING CUTTEBS Main dimensions
STAS 10070-1989 Relrgerating equippment NIR COOTING CONDENSING UNITS Main parameters
STAS 10243-1989 Refrigerating equipment WATER COLLING CONDENSING UNITS Main parameters
STAS 11792-1980 Equipment for moulding sand preparation SELF-HARDENING MIXTURE MACHINES Main parameters
STAS 11796-1980 Moulding and coremaking equipment MOULDING MACHINES Main parameters
STAS SR ISO 2927:1995 Aluminium oxide primarily used for the production of aluminium - Sampling
STAS 11797-1980 Moulding and core-making equipment MOULDING LINES Main parameters
STAS 8743-1978 Motor vehicles and trailers PNEUMATIC BRAKE CYLINDRES Principal parameters
STAS 10512-1988 Hydraulic fluid power EIGHT-PORT DIRECTIONAL MULTIPLE CONTROL VALVES NP 315 bar Main dimensions
STAS 11185-1986 WOODDEN WEFT PIRNS FOR SHUTTLES FOR AUTOMATIC LOOMSTypes and main dimensions
STAS 11635/2-1987 Equipment for useful mineral substances preparation HYDRAULIC CLASSIFIERS Main parameters
STAS 11635/3-1987 Equipment for useful mineral substances preparation PNEUMATIC CLASSIFIERS Main parameters
STAS SR ISO 802:1994 Aluminium oxide primarily used for the production of aluminium -Preparation and storage of test sarnples
STAS 9617/6-1980 Pneumatic drives DIRECTIONAL CONTROL VALVES WITH MANUAL DETENT CONTROL Types and main dimensions
STAS 9617/7-1980 Pneumatic drives DIRECTIONAL CONTROL VALVES WITH PNEUMATIC OR ELECTRICAL CONTROL Types and main dimensions
STAS 10725/3-1980 Hydraulic drives DIRECTIONAL CONTROL VALVES FOR DRIVES Types and main dimensions
STAS 9617/2-1980 Pneumatic drives PILOT DIRECTIONAL CONTROL VALVES WITH MANUAL OR MECHANICAL CONTROL Types and main dimensions
STAS 9617/4-1980 Pneumatic drives DIRECTIONAL CONTROL VALVES WITH CONTROL BY PEDAL, WITHOUT DETENT Types and main dimensions
STAS 10068-1975 Refrigerating equipment ICE-BLOCKS GENERATORS, WITH DIRECT REFRIGERATION Main parameters
STAS 10725/1-1987 Hydraulic drives directional control valves for pressure gauges Types and main dimensions
STAS 10725/2-1980 Hydrostatic drives DIRECTIONAL CONTROL VALVES FOR CLOSING-OPENING Types and main dimensions
STAS 11919-1987 General use working gears WORKING GEARS FOR CONTROL INDUSTRIAL DEVICES Main parameters
STAS 7750-1989 Machine building packings SEATINGS FOR PACKINGS WITH TRANSLATION SLEEVES Main dimensions
STAS 11918-1987 General use working gears WORKING GEARS FOR'HRN OI-'F-ON INDUSTRIAL DEVICES Main parameters
STAS 11917-1986 General use working gears WORKING GEARS FOR'HRN OI-'F-ON INDUSTRIAL DEVICES Main parameters
STAS 10230-1990 Refrigerating equipment. Refrigera tors for liquids, with piston compressors main parameters
STAS 10768/2-1987 Hydraulic drives FLOW CONTROL VALVES FOR STATIONARY EQUIPMENTS pn 200 bar Main dimensions
STAS 11635/1-1988 Equipment for useful mineral substances preparation MECHANICAL CLASSIFIERS WITH SPIRAL SHAFTS Main parameters
STAS 9617/8-1980 Pneumatic 'drives PILOTED DIRECTIONAL CONTROL VALVES WITH MANUAL ,PEDAL OR MECHANICAL CONTROL Types and main dimensions
STAS 11799-1980 MOULDING AND CORE MAKING EQUIPMENT MOULD TURNING AND PATTERN DRAWING MACHINES Main parameters
STAS 12502/2-1986 Pneumatic fluid power FIVE-PORT DIRECTIONAL CONTROL VALVES pn 10 bar Types and main dimensions
STAS 9617/1-1980 Pneumatic drives SOLENOID CONTROLLED PILOT DIRECTIONAL CONTROL VALVES, WITHOUT DETENT Types and main dimensions
STAS 12357-1985 Machine-tools with programmed numerical control CYLINDRICAL SHANKS FOR TOOLS HOLDER M:iin dimensions
STAS 9617/3-1980 Pneumatic drives DIRECTIONAL CONTROL VALVES WITH MANUAL AND MECHANICAL CONTROL WITHOUT DETENT Types and main dimensions
STAS 11690/1-1984 Hydrostatic drives PUMPS ANS ENGINES WITH UNCONTROLLABLE AXIAL PISTONSTypes and main dimensions
STAS 12569-1987 HOLDERS WITH MORSE TAPERED HOLE AND CYLINDRICAL SHANK WITH AXIAL GO VERM IN G Main dimensions
STAS 12724/2-1989 Tools with indexable inserts for turning, copying and for turning bars HOLDERS FOR TURNING AND COPYING Shapes and main dimensions
STAS SR ISO 804:1995 Aluminium oxide primarily used for the production of aluminium -Preparation of solution for anatysis - Method by alkaline fusion
STAS SR ISO 2073:1995 Aluminium oxide primarily used for the production of aluminium -Preparation of solution for analysis - Method by hydrochloric acid attack under pressure
STAS 10342-1990 Refrigerating equipment. Air vaporizer coolers and air cooled condensers by forced convection. Main parameters
STAS 12724/3-1989 Indexable insert tools for turning, copying and boring bars BORING BAR HOLDERS Shapes and main dimension

Professional Standard - Traffic, Main development

JT/T 412-2000 Godes of main controlling point of national highway

交通运输部, Main development

JT/T 412-2022 National highway main control point codes

CU-NC, Main development

NC 53-184-1988 Construction Designs. Main Channels. Procedure for the Excution of Geological Engineering Researc Stages
NC 15-48-1986 Cool Technique. Refrigerating Chambers. Main Parameters and Dinensions
NC 15-32-1985 Cool Technique. Circular Straight Conduits. Parameters and Main Dimensions
NC 15-41-1985 Cool Technique. Roof Diffuser Outlets. Main Dimensions and Types
NC 11-02-1988 Mechanical Industry. Metric and Morse Tapers for Tools Main Dimensions
NC 15-36-1985 Cool Technique. Circular Flanges for Ducts, Parameters and Main Dimensions
NC 06-08-1985 Fixing Machine Elements. Roundhead Screws in Inches Parameters and Main Dimensions
NC 97-94-1987 Packaging. Welde-Steel Horizontal Cylindric Vessel Main Pararneters and Dimensions
NC 18-45-1985 Passenger and Goods Transport. Hand Brake System for Passenger Wagons. Parameters and Main Dimensions
NC 09-04-12-1985 Unified Elements System of Molds. Dies, Stampers and Devices. Travelling Lever Main Dimensions
NC 54-21-1984 Construction Materials and Products. Precast Concrete Elementa, Lifting Devices Types, Parameters and Main Dimensions
NC 06-09-1985 Fixing Machine Elementa. Cylindrical Head, Snap Point Screws in Inches. Parameters and Main Dimensions

Military Standard of the People's Republic of China-General Armament Department, Main development

GJB 4116-2000 Satellite development program report preparation requirements
GJB 5967-2007 Requirement for support equipment planning and development
GJB 8000-2013 Requirements of capability level for military software development
GJB 3885A-2006 Requirements for quality surveillance of Development processof equipments
GJB 2115A-2013 Management requirements of military software developable project
GJB 8113-2013 General requirements of systems engineering for weapon and equipment development
GJB 3885-1999 Quality supervision requirements for weapons and equipment development process
GJB 3918-1999 Model development military representative system work requirements
GJB 3886A-2006 Requirements for using project development expenses of contractors supervised by the military representatives
GJB 3888-1999 Requirements for military representatives to participate in contract management of weapons and equipment development
GJB 624.17-2010 Training requirements of flight test research for military aircraft.Part 17:Flight control
GJB 624.15-1988 Military aircraft scientific research flight test training requires aircraft environment control system
GJB 9615.4-2019 Technical requirements for manned spacecraft rendezvous and docking Part 4: Autonomous control
GJB 624.15A-2010 Training requirement of flight test research for military aircraft.Part 15:Aircraft environment control
GJB 624.12-1988 Military aircraft research flight test training requires electrical instrumentation and automatic flight control systems

Professional Standard - Aquaculture, Main development

SC/T 4003-2000 Making of main fishing gear.Hanging of netting
SC/T 4004-2000 Making of main fishing gear.Nets-cutting counting of nets
SC/T 4005-2000 Making of main fishing gear.Joining and mounting of netting
SC/T 8130-2009 Manufacture technology requirements of fishing vessel main engine outboard cooler

CZ-CSN, Main development

CSN 30 4370-1959
CSN ON 52 5955-1963
CSN 22 1463-1981 Taper reamers with parallel shank for metric tapers. Basic dimensions
CSN 65 0306-1986 Buffer solutions for pH measurement. rimary and secondary standards. reparation and certifieation methods.
CSN 30 3558-1987 Road vehicles. Ho?e couplings for two hosed pneumatic braking systems. Principal dimensions, technical requirements and tcsting methods

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Main development

GJB 5852-2006 Risk analysis requirements for materiel development

Professional Standard - Aerospace, Main development

QJ 1438-1988 General Design Requirements for Satellite Development
QJ 1167.3-1998 Research and experiment document management system Format and filling requirements of research and experiment documents
QJ 1167.3A-2011 Research trial document management system Format and filling requirements of research trial document
QJ 3256-2005 Process Safety Requirements for Development of High Burning Rate Hydroxybutylene Propellant
QJ 2936-1997 Basic requirements for review of unqualified products in the development process of aerospace products
QJ 2434-1993 Projects and Requirements for Large-Scale Ground Tests in the Development Stage of Strategic Missile Warheads
QJ 1835.4-1990 The work content and requirements of the research and demonstration stage of the management method of the formulation and revision of aerospace industry standards

Taiwan Provincial Standard of the People's Republic of China, Main development

CNS 6754-1996 Glossary of Terms Relating to Parts of Surface-finishing Machines
CNS 6757-1996 Glossary of Terms Relating to Parts of Gear Finishing Machines

Professional Standard-Ships, Main development

CB/T 3793-1997 Main and partial cable books edit requirement
CB/T 3793-2013 Requirements for drafting main & partial cable and pallet sheets
CB/T 3922-2002 Manufacturing specification for main pressure parts of marine auxiliary boilers
CB 1373.1-2004 Specification of development and manufacture for naval diesel engine Part1:Aproving criterion of part
CB 1373.2-2004 Specification of development and manufacture for naval diesel engine Part2:Conformity guaranty of part

未注明发布机构, Main development

GJB 7636-2012 Main maintenance recommendations for military helicopters
GJB/Z 175.1-2015 Military Material Management Requirements Part 1: Development
GJB 8892.8-2017 General Requirements for Weapons and Equipment Demonstration Part 8: General Requirements for Development
GJB 8892.7-2017 General Requirements for Weapons and Equipment Demonstration Part 7: Development Project

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Main development

GB/T 17730-1999 The rules of coding for main controlling point of arterial highway
GB/T 8618-2001 The sampling methods of the main products in the salt industry
GB/T 35022-2018 Additive manufacturing.Main characteristics and corresponding test methods.Parts and powder materials

国家市场监督管理总局、中国国家标准化管理委员会, Main development

GB/T 8618-2021 Sampling methods of the main products in salt making industry
GB/T 39956.1-2021 Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main characteristics to include in the supplier's literature

IX-EU/EC, Main development

MEDDEV 2.7.2-2008 GUIDELINES ON MEDICAL DEVICES GUIDE FOR COMPETENT AUTHORITIES IN MAKING AN ASSESSMENT OF CLINICAL INVESTIGATION NOTIFICATION

Professional Standard - Aviation, Main development

HB 8456-2014 Technical reviews in development phase of civil airplane
HB 8430-2014 Requirements for standardization review of civil airplane
HB 8464-2014 Requirements for preparation and management of civil airplane standardization documents
HB 20038-2011 General requirements for multi-site collaborative project management of airplane development
HB/Z 354-2002 Principles,procedures and requirements for aero-engines material research and development
HB 8458-2014 Preparation for statement of work for civil airplane development program
HB 5618.2-1988 Basic product drawing management system (life-saving specialty) Complete set of product drawings and main technical documents

German Institute for Standardization, Main development

DIN 15432:1989 Power transmission engineering; brake discs; main dimensions
DIN 15431:1980 Power transmission engineering; brake drums, main dimensions
DIN EN 734:1995 Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system; German version EN 734:1995
DIN IEC 62241:2006 Nuclear power plants - Main control room - Alarm functions and presentation (IEC 62241:2004)
DIN 43718:1987 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
DIN 43861-1:1979-02 Ripple control system, receiver to be mounted in lighting columns; main dimensions
DIN 43718:1987-05 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
DIN 8967:1968 Baking sheets, baking ovens, refrigerators and freezers for bakeries; main dimensions
DIN EN ISO 17296-3:2016-12 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German version EN ISO 17296-3:2016 / Note: To be replaced by DIN EN ISO/ASTM 52927 (2022-03).
DIN 43861-1:1979 Ripple control system, receiver to be mounted in lighting columns; main dimensions
DIN EN 62241:2015 Nuclear power plants - Main control room - Alarm functions and presentation (IEC 62241:2004); German version EN 62241:2015
DIN EN 13726-6:2003 Non-active medical devices - Test methods for primary wound dressings - Part 6: Odour control; German version EN 13726-6:2003

Group Standards of the People's Republic of China, Main development

T/ZSA 7-2020 Additive manufacturing—Main characteristics and corresponding test methods
T/CGCPU 017-2021 Quality control requirements for clinical research of CAR-T cell products
T/PAZYC 0008-2021 The limit standard of chemical fertilizer quota system for main Chinese herbal medicines
T/ZSA 95-2021 Requirements for quality control on chimeric antigen receptor T cell products clinical research
T/CMEPCA 007-2023 Technical standards for main equipment of intelligent manufacturing enterprises——cutter
T/CMTBA 1009.2-2021 Quality evaluation standard for vertical machining centers —Part2：Control and evaluation of manufacturing processes and key parts

Professional Standard - Agriculture, Main development

SC/T 4004-1986 Cutting and calculation of main fishing gear making mesh

Professional Standard - Nuclear Industry, Main development

EJ/T 828-1994 Quality Control Requirements for Nuclear Industry Product Development

Society of Automotive Engineers (SAE), Main development

SAE J1694-2012 Remanufactured Hydraulic Master Cylinder for Motor Vehicle brakes Performance Requirements
SAE J1154-2012 Hydraulic Master Cylinders for Motor Vehicle brakes Performance requirements
SAE ARP4102/5SECT1-2008 PRIMARY FLIGHT CONTROLS BY ELECTRICAL SIGNALING SECTION I
SAE J1154-1991 Hydraulic Master Cylinders for Motor Vehicle Brakes - Performance Requirements, Standard June 1991
SAE J1694-1994 Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes - Performance Requirements, Recommended Practice June 1994
SAE TS117-4-2004 TS117 Manufacturing and Inspection Requirements for Rivet, Blind, Self- Plugging, Flush Break, Mechanically Locked Spindle Aluminium Alloy (2014 Material)

Professional Standard - Ocean, Main development

HY/T 0317-2021 Technical requirements for development of tidal current energy converter

British Standards Institution (BSI), Main development

BS EN 13726-6:2003 Test methods for primary wound dressings - Odour control
BS SP 18 and 19:1949 Specification for washers for aircraft purposes (primarily for use with timber)
BS IEC 62241:2004 Nuclear power plants - Main control room - Alarm functions and presentation
BS ISO 17296-3:2014 Additive manufacturing. General principles. Main characteristics and corresponding test methods
BS ISO 23028:2019 Aluminium oxide primarily used for the production of aluminium. Preparation and storage of test samples
BS EN ISO 17296-3:2016 Additive manufacturing. General principles. Main characteristics and corresponding test methods
BS EN ISO 15378:2015 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
BS EN ISO 15378:2011 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
BS ISO 10094-1:2010 Pneumatic fluid power. Electro-pneumatic pressure control valves. Main characteristics to include in the supplier's literature
BS ISO 10041-1:2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Main characteristics to include in the supplier's literature
BS ISO 12315:2010 Aluminium oxide primarily used for production of aluminium - Method for calculating the Al2O3 content of smelter-grade alumina

PL-PKN, Main development

PN S76034-1971 Electrical au?omo?ive equipement Suppressor resis?ance Main dimensions
PN M73094-1964 Hydraulic drive and con?rol equipment Seal rings. Main dimensions
PN T92702-1983 Stacje radiolokacyjne kontroli obszaru powietrznego do kierowania ruchem lotniczym.Typy.Podstawowe parametry i wymagania techniczne
PN T92705-1983 Stacje radiolokacyjne kontroli obszaru powietrznego Metody pomiarow podstawowych parametrow
PN T92710-1986 Radar systems for air traffic control Types, principal parameters, technical requirements, metods of test
PN G32000-1992 Minings hydraulic drives and controls Staple — look couplings Basic parameters and dimensions
PN T92703-1990 Air traffic data simulators for training of air traffic controllers Types Principal parameters General re?uirements
PN M34140-14-1986 Installations for the water treatment Installations for preparation of white wash from hydrated lim? and burnt pulverised lim? Requirements and tests

Professional Standard - Petroleum, Main development

SY/T 6472-2010 Method of stipulation of principal energy consumption norm for production of oil field
SY 6472-2010 Compilation Method of Main Energy Consumption Quota for Oilfield Production
SY 6683-2007 Technical Requirements for the Compilation of the Main Case for Polymer Flooding Development
SY/T 6472-2000 Method of stipulation of principal energy consumption norm for production of oil field

Standard Association of Australia （SAA）, Main development

AS 1357.2:2005 Valves primarily for use in heated water systems - Control valves
AS 1357.2:2005(R2015)/Amdt 2:2009
AS 1357.2:2005(R2015)/Amdt 1:2006
AS 1357.2:2005(R2015)

Zhejiang Provincial Standard of the People's Republic of China, Main development

DB3311/T 48-2015 Technical Regulations on Ecological Control of Chestnut Main Diseases and Insects
DB3311/T 47-2015 Technical Regulations on Ecological Control of Main Pests of Moso Bamboo
DB3301/T 1117-2022 Application limit standard of chemical fertilizer quota system for major crops

Fujian Provincial Standard of the People's Republic of China, Main development

DB35/T 1103-2011 Technical Regulations on Ecological Control of Main Pests in Vegetable Fields

National Metrological Technical Specifications of the People's Republic of China, Main development

JJF 1342-2012 General Requirements for Reference Material Producers
JJF 1342-2022 General Requirements for the Competence of Reference Material Producers
JJF 1344-2012 General Technical Requirements for Producing Gas Reference Materials

ETSI - European Telecommunications Standards Institute, Main development

TR 102 838-2009 Reconfigurable Radio Systems (RRS); Summary of feasibility studies and potential standardization topics (V1.1.1)

API - American Petroleum Institute, Main development

API TR 409-1995 Primary Skin Irritation Study In Rabbits of: API 91-01 and PS-6 Unleaded Test Gasolines (CAIS Abstract No. 42-2014)
API SPEC 2SF-2013 Manufacture of Structural Steel Forgings for Primary Offshore Applications (First Edition)
API 4203-1972 A Study of Mandatory Engline Maintenance for Reducing Vehicle Exhaust Emissions volume I. Executive Summary
API SPEC 2SC-2009 Manufacture of Structural Steel Castings for Primary Offshore Applications (First Edition; Effective March 1@ 2010)

AT-ON, Main development

ONORM V 2000-1979 Controllers for traffic lights: Classification and main dimensions
ONORM L 5201-1990 Agricultural trailers and machinery; main dimensions of wheel brakes
ONORM M 7307 Teil.2-1981 Evaluation of stress analyses on boilers or pressure vessels; stress limits for primarily noncyclic loadings

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Main development

ASHRAE HI-02-20-2-2002 Developing Owner's Project Requirements During Pre-Design

BELST, Main development

STB 1659-2009 Сlock of synchronization system. Main parameters and methods of control
STB 1661-2006 Broadcasting transmitters, fixed AM modulated, ranges of low frequency, mean frequency and high frequency. Main parameters, technical requirements and methods of measurement

Professional Standard - Railway, Main development

TB/T 3026.3-2002 Digital Conference Phone Chairman Control Panel Technical Requirements
TB/T 1962-1987 Basic dimensions and main performance of electrical control connectors
TB/T 1478-1983 Standard series and main technical conditions of railway long-distance communication cables
TB/T 3052-2002 Standard and main technical conditions of train wireless dispatching communication system
TB/T 3052-2002/XG1-2006 Standard and main technical conditions of train wireless dispatching communication system
TB/T 2500-1994 Standard series and main technical conditions of railway section telephone equipment (wired)
TB/T 1726-1986 Standard series and main technical conditions of wireless communication equipment in railway stations
TB/T 1777-2000 Standard series and main technical conditions of passenger transport broadcasting equipment in railway stations
TB/T 2293-1991 150, 450MHz railway train wireless repeater, leaky coaxial cable standard series and main technical conditions
TB/T 1591-1985 Regulations on layout, type and steering direction of main control devices for diesel locomotives and diesel trains

Professional Standard - Chemical Industry, Main development

HG/T 3109-1988 Type and main parameters of steel mechanical stirring vessel

American Petroleum Institute (API), Main development

API Spec 2SC-2009(2020) Manufacture of Structural Steel Castings for Primary Offshore Applications
API Spec 2SF-2013(2020) Manufacture of Structural Steel Forgings for Primary Offshore Applications

Professional Standard - Navy, Main development

HJB 222-2000 Requirement of life cycle cost for naval ship development
HJB 66-1991 Specifications and data of contract requirements for naval aircrafts and helicopters

BE-NBN, Main development

NBN E 03-003-1984

Underwriters Laboratories (UL), Main development

UL 372-1994 Primary safety controls for gas- and oil-fired appliances
UL 1004-7 BULLETIN-2010 SUMMARY OF TOPICS The following changes in requirements to the Standard for Electronically Protected Motors, UL 1004-7, are being proposed: 1. Motor Control Correlation Table
UL 1963 BULLETIN-2010 SUMMARY OF TOPICS The following changes in requirements to the Standard for Refrigerant Recovery/Recycling Equipment, UL 1963, are being proposed for preliminary review and comment

Korean Agency for Technology and Standards (KATS), Main development

KS C IEC 61771:2012 Nuclear power plants－Main control-room－Verification and validation of design
KS M ISO 802:2013 Aluminium oxide primarily used for the production of aluminium－Preparation and storage of test samples
KS B ISO 12085:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Motif parameters
KS B ISO 12085:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters
KS M ISO 802-2003(2008) Aluminium oxide primarily used for the production of aluminium－Preparation and storage of test samples
KS M ISO 3566:2003 Sodium fluoride primarily used for the production of aluminium－Determination of chlorides content－Turbidimetric method
KS M ISO 3429:2007 Sodium fluoride primarily used for the production of aluminium－Determination of iron content－1,10－phenanthroline photometric method
KS M ISO 804-2003(2018)
KS M ISO 3429:2017 Sodium fluoride primarily used for the production of aluminiumDetermination of iron content-1,10-Phenanthroline photometric method
KS M ISO 3431:2003 Sodium fluoride primarily used for the production of aluminium－Determination of soluble sulphates content－Turbidimetric method
KS D ISO 17296-3:2018 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

SAE - SAE International, Main development

SAE J1154-1977 Hydraulic Master Cylinders for Motor Vehicle Brakes-Performance Requirements

Yunnan Provincial Standard of the People's Republic of China, Main development

DB5306/T 62-2020 Zhaotong kiwifruit main diseases and insect pests control technical regulations
DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry
DB53/T 497-2013 Guidelines for the establishment and verification of near-infrared calibration models for the main chemical constituents of tobacco and tobacco products

机械工业部, Main development

JB/T 6693-1993 Manufacturing process of main pressure components of water tube industrial boilers

Indonesia Standards, Main development

SNI 04-6266-2000 Nuclear power plants - Main control room - Verification and validation of design

Association Francaise de Normalisation, Main development

NF E44-125*NF EN 734:1995 Side chanel pumps pn 40. Nominal duty point, main dimensions, designation system.
NF T45-018:2001 Raw material for the rubber industry - Chemical products - Dispersions or principal mixtures.
NF T20-421:1976 Sodium hydroxyde for industrial use. Sampling. Test sample. Preparation of the main solution for carrying out certain determinations.
NF T20-371:1977 Potassium hydroxide for industrial use. Sampling. Test sample. Preparation of the main solution for carrying out certain determinations.
NF E67-002-3*NF EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3 : main characteristics and corresponding test methods
NF EN ISO 17296-3:2016 Fabrication additive - Principes généraux - Partie 3 : principales caractéristiques et méthodes d'essai correspondantes
NF E67-002-3:2015 Additive manufacturing - General principles - Part 3 : main characteristics and corresponding test methods
NF C26-208:1985 Principal aspects of functional evaluation of electrical insulation systems Ageing mechanisms and diagnostic procedures
NF S97-122-6*NF EN 13726-6:2003 Non-active medical devices - Test methods for primary wound dressings - Part 6 : odour control.
NF E49-087-1*NF ISO 10041-1:2010 Pneumatic fluid power - Electro-pneumatic continuous flow control valves - Part 1 : main characteristics to include in the supplier's literature
NF EN 13726-6:2003 Dispositifs médicaux non-actifs - Méthodes d'essai pour les pansements primaires en contact avec la plaie - Partie 6 : contrôle de l'odeur
NF E49-088-1:2010 Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1 : main characteristics to include in the supplier's literature.
NF C74-020/A1*NF EN 60601-1-10/A1:2015 Medical electrical equipment - Part 1-10 : general requirements for basic safety and essential performance - Collateral standard : requirements for the development of physiologic closed-loop controllers
NF C97-205-1*NF EN 61947-1:2004 Electronic projection - Measurement and documentation of key performance criteria - Part 1 : fixed resolution projectors
FD CEN/TR 16567:2013 Mécanismes d'obligations en matière d'efficacité énergétique en Europe - Vue d'ensemble et analyse des principales caractéristiques et possibilités d'harmonisation

Professional Standard - Coal, Main development

MT/T 636-1996 General rules for programming optimization of main ventilators in mines

Aerospace Industries Association/ANSI Aerospace Standards, Main development

AIA/NAS NAS 458-1953 Vendor Parts; Contractor Requirements for Drawings, Data Lists, and Specification of, Specification for (Rev. 2)

European Telecommunications Standards Institute (ETSI), Main development

ETSI GR ENI 017 V 2.1.1-2021 Experiential Networked Intelligence (ENI) - Overview of Prominent Control Loop Architectures
ETSI TR 133 937-2010 Universal Mobile Telecommunications System (UMTS); LTE; Study of mechanisms for Protection against Unsolicited Communication for IMS (PUCI) V9.2.0; 3GPP TR 33.937 version 9.2.0 Release 9

PT-IPQ, Main development

NP 1157-1976

TR-TSE, Main development

TS 741-1969 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM PREPARATION AND STORAGE OF TEST SAMPLES
TS 775-1969 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM PREPARATION OF SAMPLE SOLUTION FOR ANALYSIS
TS 3614-1981 SODYUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF SOLUBLE SULPHATES CONTENT — TURBITIMETRIC METHOD
TS 2071-1975 POTASSIUM HYDROXIDE FOR INDUSTRIAL USE - SAMPLING - TEST SAMPLE - PREPARATION OF THE MAIN SOLUTION FOR CARRYING OUT CERTAIN DETERMINATIONS

Professional Standard - Automobile, Main development

QC/T 311-2008 Performance requirements and bench test methods of automobile brake master cylinder

International Organization for Standardization (ISO), Main development

ISO 802:1976 Aluminium oxide primarily used for the production of aluminium; Preparation and storage of test samples
ISO 23028:2019 Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples
ISO 804:1976 Aluminium oxide primarily used for the production of aluminium; Preparation of solution for analysis; Method by alkaline fusion
ISO 5967:1981 Taps and thread cutting; Nomenclature of the main types and terminology Trilingual edition
ISO 17296-3:2014 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods
ISO 15378:2006 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
ISO 3592:1978 Numerical control of machines; NC processor output; Logical structure (and major words)
ISO 3195:1975 Sodium hydroxide for industrial use; Sampling; Test Sample; Preparation of the main solution for carrying out certain determinations
ISO 12315:2010 Aluminium oxide primarily used for production of aluminium - Method for calculating the Al2O3 content of smelter-grade alumina
ISO 10094-1:2010 Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1: Main characteristics to include in the supplier's literature
ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium; Preparation of solution for analysis; Method by hydrochloric acid attack under pressure
ISO 10041-1:2010 Pneumatic fluid power - Electro-pneumatic continuous flow control valves - Part 1: Main characteristics to include in the supplier's literature

Hunan Provincial Standard of the People's Republic of China, Main development

DB43/T 745-2013 Energy consumption quota and calculation method of main products in pulp and paper industry

工业和信息化部, Main development

QC/T 311-2018 (2) Performance requirements and bench test methods for automotive hydraulic brake master cylinders
QC/T 311-2018 Performance requirements and bench test methods for automotive hydraulic brake master cylinders

Hubei Provincial Standard of the People's Republic of China, Main development

DB42/T 349.13-2018 Water intake (use) quotas for major industries in Wuhan City Part 13: Manufacturing of glass and glass products
DB42/T 349.8-2015 Water intake (use) quotas for major industries in Wuhan City Part 8: Beverage Manufacturing
DB42/T 349.9-2017 Water intake (use) quotas for major industries in Wuhan Part 9: Food manufacturing
DB42/T 349.12-2018 Water intake (use) quotas for major industries in Wuhan Part 12: Passenger car manufacturing
DB42/T 349.10-2017 Water intake (use) quotas for major industries in Wuhan City Part 10: Manufacturing of electronic appliances

YU-JUS, Main development

JUS H.G8.409-1991 Reaqents. Sodium hvdroxi?e. Preparation of the main solutions for carrving out certain determinations
JUS H.G8.508-1991 Reagents. Potassium hydroxide. Preparation of the main solutions for carrying out certain determinations
JUS H.B8.609-1979 Aluminium oxide primariy used for theproduction ofaluminium. Preparation ofsokition for analysis - Method by hydrochbric acid attack under pressure

GOSTR, Main development

GOST R 58926-2020 The system of ensuring the uniformity of measurements at the enterprises of the aviation industry. Main provisions

Shanghai Provincial Standard of the People's Republic of China, Main development

DB31/T 1266-2020 Technical requirements and test methods for autonomous emergency braking systems of passenger cars
DB31/T 478.24-2017 Water quotas for main industrial products and their calculation methods - Part 24: Soybean products
DB31/T 478.7-2010 Water quotas and calculation methods for major industrial products Part 7: Petroleum refining
DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)

国家能源局, Main development

NB/T 10098-2018 Requirements for the preparation of feasibility study reports for geothermal energy direct utilization projects

ES-AENOR, Main development

Inner Mongolia Provincial Standard of the People's Republic of China, Main development

DB15/T 412-2005 The Precautionary and Controling Programme Of the Dairy Cattle Main Nutritive Metabolic Disease on the Dairy Farm

European Committee for Standardization (CEN), Main development

EN ISO 12085:1997 Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters ISO 12085: 1996
EN ISO 15378:2011 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
EN ISO 12085:1997/AC:2008 Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
prEN ISO/ASTM 52927 Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM DIS 52927:2022)

IT-UNI, Main development

UNI 11822-2021 Non-regulated professions- Forensics Expert- Knowledge, skills, autonomy and responsibility requirements
UNI 11477-2021 Non-regulated professions - Extra-judicial counsellor - Knowledge, skill, autonomy and repsonsibility requirements
UNI 11483-2021 Non-regulated professions - Communication Manager - Knowledge, skill, autonomy and responsibility requirements
UNI 11814-2021 Non-regulated professions - Innovation management professionals - Knowledge, skill, autonomy and responsibility requirements
ANCC M.13.A.1-1973

IAEA - International Atomic Energy Agency, Main development

SSG-37-2015 Instrumentation and Control Systems and Software Important to Safety for Research Reactors

Professional Standard - Public Safety Standards, Main development

GA/T 1138-2014 Information security technology.Security technical requirements for access control products of host resources

海关总署, Main development

HS/T 70-2022 Customs statistical commodity catalog and rules for compiling the catalog of major import and export commodities

American National Standards Institute （ANSI), Main development

ANSI/IEEE 1483:2000 Standard for the Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control

Anhui Provincial Standard of the People's Republic of China, Main development

DB34/T 2552-2015 Technical requirements and test methods for automobile vacuum booster with brake master cylinder assembly

Professional Standard - Electron, Main development

SJ 1.1-1987 Major procedures and requirements for working out of annual plans relating to technical standards in electronic industry
SJ 1.3-1987 Development of responsibilities for lead units responsible for technical standards preparation in electronic industry

KR-KS, Main development

KS D ISO 17296-3-2018(2023) Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
KS C IEC 60601-1-10-2017 Medical electrical equipment－Part 1-10：General requirements for basic safety and essential performance－Collateral Standard：Requirements for the development of physiologic closed-loop controllers
KS D ISO 17296-3-2018 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

CEN - European Committee for Standardization, Main development

EN ISO 15378:2007 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000@ with reference to Good Manufacturing Practice (GMP)
EN ISO 15378:2017 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015@ with reference to good manufacturing practice (GMP)

IEC - International Electrotechnical Commission, Main development

IEC TR 61955:1998 Primary Batteries - Summary of Research and Actions Limiting Risks to Reversed Installation of Primary Batteries (Edition 1.0)

VN-TCVN, Main development

TCVN 2020-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 1 category made of round steel.Main parameters of coils
TCVN 2021-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 2 category made of round steel.Main parameters of coils
TCVN 2022-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 3 category made of round steel.Main parameters of coils
TCVN 2023-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 4 category made of round steel.Main parameters of coils
TCVN 2024-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 1 category made of round steel.Main parameters of coils
TCVN 2025-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 2 category made of round steel.Main parameters of coils

(U.S.) Ford Automotive Standards, Main development

FORD WG950-2006 MATERIAL AND PERFORMANCE REQUIREMENTS OF ALUMINUM AND STEEL BODIED OPEN AND CLOSED END BLIND RIVETS

Association of German Mechanical Engineers, Main development

DVS 0705 Beiblatt 1-2001

International Electrotechnical Commission (IEC), Main development

IEC TR3 61955:1998 Primary batteries - Summary of research and actions limiting risks to reserved installation of primary batteries

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Main development

IPC 2511B-2002 Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer MXL Schema Methodology

Danish Standards Foundation, Main development

DS/EN 60601-1-10:2021 Medical electrical equipment – Part 1-10: General requirements for basic safety and essential performance – Collateral Standard: Requirements for the development of physiologic closed-loop controllers

American Society for Testing and Materials (ASTM), Main development

ASTM F2970-17 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
ASTM F2970-20 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
ASTM D6946-03 Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
ASTM F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts

AENOR, Main development

UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
UNE 21347-3:1977 ELECTRICAL INSULATING MATERIALS. MATERIALS MADE BASICALLY OF AGGLOMERATED MICA OR MICA PAPER. SPECIFICATIONS FOR MOULDABLE MATERIALS.
UNE 21347-4:1978 ELECTRICAL INSULATING MATERIALS. MATERIALS MADE BASICALLY OF AGGLOMERATED MICA OR MICA PAPER. SPECIFICATIONS FOR FLEXIBLE MATERIALS.

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Main development

REPORT BT.2129-2008 User requirements for a Flat Panel Display (FPD) as a Master monitor in an HDTV programme production environment
ITU-R F.762-1992 Main Characteristics of Remote Control and Monitoring Systems for HF Receiving and Transmitting Stations - Section 3Ad - Operational Questions

SE-SIS, Main development

SIS SS-IEC 965:1991 Nuclear instrumentation — Supplementary control points for reactor shutdown without access to the main control room

ZA-SANS, Main development

NRS 009-2-1-1998 Electricity sales systems Part 2: Functional and performance requirements Section 1: System master stations

BG-BDS, Main development

BGC EN 644-2000 Paper-Untrimmed sizes-Primary range and supplementary range designation and tolerances,expression of direction of manufacture