ZH
RU
ES
Testing of military batteries
Testing of military batteries, Total:142 items.
In the international standard classification, Testing of military batteries involves: Measurement of fluid flow, Electric road vehicles, Galvanic cells and batteries, Railway rolling stock, Ground service and maintenance equipment, Road vehicle systems, Vocabularies, Rectifiers. Convertors. Stabilized power supply, Power transmission and distribution networks, Burners. Boilers, Wind turbine systems and other alternative sources of energy, Fuel cells, Motor cycles and mopeds, Construction materials, Solar energy engineering, Aerospace electric equipment and systems, Aerospace fluid systems and components, Energy and heat transfer engineering in general, Power stations in general, Microbiology, Environmental protection, Powder metallurgy, Testing of metals, Ceramics, Aids for disabled or handicapped persons, Components and accessories for telecommunications equipment, Protection against fire.
Military Standard of the People's Republic of China-General Armament Department, Testing of military batteries
- GJB 3992-2000 Inspection and acceptance rules for military lead-acid batteries
- GJB 9213-2017 Electrical performance inspection method for military VHF/UHF frequency band monitoring equipment
- GJB 9135-2017 General specification for automatic detection system of military AC and DC power supply characteristics
NATO - North Atlantic Treaty Organization, Testing of military batteries
- STANAG 4530-2005 STANDARDIZATION QUALIFICATION REQUIREMENTS AND RELATED INSPECTION METHODS FOR BATTERIES IN MILITARY APPLICATIONS (ED 1)
TR-TSE, Testing of military batteries
- TS 2924-1978 LEAD-ACIDS-BATTERY FOR MILITARY AIRCRAFT, VEHICLE AND STATIONARY UNIT
Sichuan Provincial Standard of the People's Republic of China, Testing of military batteries
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Testing of military batteries
- GB/T 34015-2017 Recycling of traction battery used in electric vehicle—Test of residual capacity
Group Standards of the People's Republic of China, Testing of military batteries
- T/CBHA 001-2022 Examing & assessment specification for EV batterries
- T/CAQI 329-2023 Electric vehicle traction battery testing service specification
- T/GDBIA 01-2023 Regulations of electric bicycle battery rapid testing
- T/CES 172-2022 Test specification for battery management system of electrochemical energy storage station
- T/CPSS 1001-2023 Technical specification of bidirectional AC-DC power module for lithium-based battery test
- T/FSYY 0050-2021 Retired traction battery echelon use — Test methods of residual capacity
- T/CES 203-2023 Inspection regulations for lithium iron phosphate battery energy storage liquid cooling system
- T/CEC 461-2021 Operating procedures for performance testing of lithium-ion batteries used in electrochemical energy storage power stations
- T/SEIA 001-2020 General technical requirements and test method of electric bicycles-cell or battery
- T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
- T/CEC 131.11-2020 Secondary utilization of lead-acid batteries Part 11: Technical specifications for plate failure detection - potential difference method
- T/CAB 0246-2023 General technical specification for hydrogen quality detection for proton exchange membrane fuel cell of mobile laboratory
Hebei Provincial Standard of the People's Republic of China, Testing of military batteries
- DB13/T 5049-2019 Specifications for safety inspection and inspection of explosion-proof battery electric locomotives in use in coal mines
Anhui Provincial Standard of the People's Republic of China, Testing of military batteries
- DB34/T 2649-2016 Specifications for safety inspection and inspection of explosion-proof battery electric locomotives in use in coal mines
Korean Agency for Technology and Standards (KATS), Testing of military batteries
- KS C IEC TR 62060:2020 Secondary cells and batteries — Monitoring of lead-acid stationary batteries — User guide
- KS C 8546-2008(2013) Safety tests for lithium secondary cells and batteries for portable applications
- KS C IEC TS 61430:2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
- KS C 8546-2008 Safety tests for lithium secondary cells and batteries for portable applications
- KS C 8532-1995(2020) Measuring procedure of residual capacity for lead acid battery in photovoltaic system
- KS L 1640-2021 Test methods for polarization of ceramic-based electrochemical cell by current interrupt technique
- KS C 8532-1995 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
- KS C 8527-2005(2010) Solar simulators used in measuringcrystalline solar cells and modules
KR-KS, Testing of military batteries
- KS C IEC TR 62060-2020 Secondary cells and batteries — Monitoring of lead-acid stationary batteries — User guide
- KS C IEC TS 61430-2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
United States Navy, Testing of military batteries
RU-GOST R, Testing of military batteries
- GOST R IEC 61430-2004 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
- GOST R IEC 61959-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries
- GOST R IEC 60335-2-29-1998 Safety of household and similar electrical appliances. Particular requirements for battery chargers and test methods
- GOST 27570.28-1991 Safety of household and similar electrical appliances. Particular requirements for battery chargers and test methods
国家能源局, Testing of military batteries
- NB/T 33024-2016 Testing specifications for power lithium-ion batteries for electric vehicles
British Standards Institution (BSI), Testing of military batteries
- PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
- BS EN ISO 20380:2017 Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods
- BS EN IEC 62282-4-102:2023 Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
- BS EN 61427-2:2015 Secondary cells and batteries for renewable energy storage. General requirements and methods of test. On-grid applications
- BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
- BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- BS EN IEC 62282-4-600:2022 Fuel cell technologies - Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid systems performance test methods for excavators
- BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
- 16/30332738 DC BS EN ISO 20380. Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods
- BS EN IEC 62660-1:2019 Secondary lithium-ion cells for the propulsion of electric road vehicles. Performance testing
- BS ISO 7176-25:2022 Wheelchairs. Lead-acid batteries and chargers for powered wheelchairs. Requirements and test methods
- BS EN IEC 62660-2:2019 Secondary lithium-ion cells for the propulsion of electric road vehicles. Reliability and abuse testing
- BS EN IEC 61243-1:2021 Live working — Voltage detectors Part 1 : Capacitive type to be used for voltages exceeding 1 kV AC
ZA-SANS, Testing of military batteries
- SANS 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
International Electrotechnical Commission (IEC), Testing of military batteries
- IEC TR 62060:2001 Secondary cells and batteries - Monitoring of lead acid stationary batteries - User guide
- IEC 105/429/CD:2012 IEC 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
- IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for exc
HU-MSZT, Testing of military batteries
Hunan Provincial Standard of the People's Republic of China, Testing of military batteries
- DB43/T 2552-2023 Technical specification for polarization resistance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2550-2023 Technical specifications for ohmic internal resistance detection of lithium-ion battery boxes for power energy storage
- DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage
Society of Automotive Engineers (SAE), Testing of military batteries
- SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications
- SAE ARP4150-1996 Procedure for Inspection of Inservice Airborne Accumulators for Corrosion and Damage
- SAE AIR4150-1993 Inspection of Inservice Airborne Accumulators for Corrosion and Damage
RO-ASRO, Testing of military batteries
U.S. Military Regulations and Norms, Testing of military batteries
Japanese Industrial Standards Committee (JISC), Testing of military batteries
- JIS C 8920:2005 Measuring method of equivalent cell temperature for crystalline solar cells by the open-circuit voltage
- JIS K 0350-50-10:2006 Testing method for detection and enumeration of Legionella in industrial water and wastewater
- JIS C 8972:1997 Testing procedure of long discharge rate lead-acid batteries for photovoltaic systems
- JIS C 8971:1993 Measuring procedure of residual capacity for lead acid battery in photovoltaic system
- JIS C 8824:2008 Testing methods for environment of small polymer electrolyte fuel cell power systems
German Institute for Standardization, Testing of military batteries
- DIN 14679:2007 Firefighting purposes - Chargers for float charge of starter batteries and auxiliary batteries for special uses - Requirements and testing
- DIN 14679:2008 Firefighting purposes - Chargers for float charge of starter batteries and auxiliary batteries for special uses - Requirements and testing
- DIN EN ISO 20380:2018-03 Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017); German version EN ISO 20380:2017
- DIN EN ISO 20380:2018 Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)
- DIN 50957:1978 Testing of electrolytes used for electro-deposited metallic coatings; test involving electro-deposition of a coating in the Hull cell, general principles
- DIN 50957-2:2019-06 Testing of electrolytes used for electro-deposited metallic coatings - Test involving electro-deposition - Part 2: Special test cells
- DIN 72553:1994-04 Battery jumper cable for road vehicles with combustion engines; dimensions, requirements, test
BE-NBN, Testing of military batteries
JP-JEM, Testing of military batteries
- JEM 1431-2008 Testing programs for stationary lead-acic batteries for nuclear power power plants
Professional Standard - Electricity, Testing of military batteries
- DL/T 1397.1-2014 General specification for DC power system test equipments of electric power system.Part 1: Battery voltage inspection apparatus
Association Francaise de Normalisation, Testing of military batteries
- NF EN ISO 20380:2017 Piscines publiques - Systèmes de vision par ordinateur pour la détection de noyades en piscines - Exigences de sécurité et méthodes d'essai
- NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
Institute of Electrical and Electronics Engineers (IEEE), Testing of military batteries
- IEEE 1491-2005 IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
- IEEE 1491/COR-2005 Selection and use of battery monitoring equipment in stationary applications
- IEEE 1491-2012 Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
AR-IRAM, Testing of military batteries
GOSTR, Testing of military batteries
- PNST 497-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 2. Safety requirements and test methods
- GOST R IEC 63115-1-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 1. Labeling and designation requirements. Performance test methods
- GOST R IEC 61427-2-2016 Secondary cells and batteries for renewable energy storage. General requirements and methods of test. Part 2. On-grid applications
- GOST R IEC 61982-4-2020 Secondary batteries (except lithium) for the propulsion of electric road vehicles. Part 4. Nickel-metal hydride cells and modules. Safety test methods at operation
American National Standards Institute （ANSI), Testing of military batteries
- ANSI/ASTM E1036/E 1036M:1996 Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (Metric)
- ANSI/ASTM D7148:2013 Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
- ANSI/SCTE 48-3-2011 Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
ES-UNE, Testing of military batteries
- UNE-EN ISO 20380:2018 Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)
- UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...
- UNE-EN IEC 61243-1:2022 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC
Professional Standard - Light Industry, Testing of military batteries
- QB/T 2303.10-2008 Paste coated paper separator for batteries.Part 10:Determination of pH
- QB/T 2303.5-2008 Paste coated paper separator for batteries.Part 5:Determination of paste weight
- QB/T 2303.6-2008 Paste coated paper separator for batteries.Part 6:Determination moisture content
- QB/T 2303.7-2008 Paste coated paper separator for batteries.Part 7:Determination of iron content
- QB/T 2303.8-2008 Paste coated paper separator for batteries.Part 8:Determination of copper content
- QB/T 2303.9-2008 Paste coated paper separator for batteries.Part 9：Determination of mercury content
- QB/T 2303.11-2008 Paste coated paper separator for batteries.Part 11:Determination of electrolyte absorbency
- QB/T 2303.2-2008 Paste coated paper separator for batteries.Part 2:Determination of base paper thickness
- QB/T 2303.3-2008 Paste coated paper separator for batteries.Part 3：Determination of base paper grammage
- QB/T 2303.12-2008 Paste coated paper separator for batteries.Part 12:Determination of infiltration speed
- QB/T 2303.13-2008 Paste coated paper separator for batteries.Part 13:Determination of tensile strength
- QB/T 2303.4-2008 Paste coated paper separator for batteries.Part 4：Determination of paste coated paper separator thickness
European Committee for Electrotechnical Standardization（CENELEC）, Testing of military batteries
- EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
工业和信息化部, Testing of military batteries
- SJ/T 10171-2016 General test method for basic properties of alkaline battery separators
- SJ/T 11632-2016 Testing method for microcrack defects in silicon wafers for solar cells
Lithuanian Standards Office , Testing of military batteries
- LST EN 61427-2005 Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test (IEC 61427:2005)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Testing of military batteries
- GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
NEMA - National Electrical Manufacturers Association, Testing of military batteries
- NEMA IB 2-1974 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
- NEMA IB 2-1987 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
- NEMA IB 3-1983 CYCLE LIFE TESTING OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
Professional Standard - Electron, Testing of military batteries
- SJ 20370-1993 General specification for military electronic test equipment.Basic requirements for design and construction
AT-ON, Testing of military batteries
- ONORM V 5116-1985 Battery jumper cable for road vehicles and units with combustion engines; dimensions, requirements, tests
PL-PKN, Testing of military batteries
- PN-EN IEC 62282-8-101-2020-11 E Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (IEC 62282-8-101:2020)
Standard Association of Australia （SAA）, Testing of military batteries
- AS 7240.6:2006 Fire detection and alarm systems - Carbon monoxide fire detectors using electro-chemical cells
Danish Standards Foundation, Testing of military batteries
- DS/EN 61982-1:2007 Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters
CENELEC - European Committee for Electrotechnical Standardization, Testing of military batteries
- EN 61982-1:2006 Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters