ZH
RU
ES

m/m/1/n

m/m/1/n, Total:207 items.

In the international standard classification, m/m/1/n involves: Hand-held tools, Aerospace electric equipment and systems, Road vehicle systems, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Rails and railway components, Machine tools, Cycles, Character sets and information coding, Aircraft and space vehicles in general, Structures of buildings, Internal combustion engines for road vehicles, Acoustics and acoustic measurements, Commercial vehicles, Passenger cars. Caravans and light trailers, Road vehicles in general, Footwear, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Electrical wires and cables, Products of the chemical industry, Fuels.

未注明发布机构, m/m/1/n

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, m/m/1/n

INFORME M.910-1 SPANISH-1986 SHARING BETWEEN THE MARITIME MOBILE SERVICE AND THE AERONAUTICAL RADIONAVIGATION SERVICE IN THE BAND 415-526.5 kHz
ITU-R M.491-1 SPANISH-1986 Translation between an Identity Number and Identities for Direct-Printing Telegraphy in the Maritime Mobile Service
ITU-R M.829-1 SPANISH-1994 Frequency Sharing in the 1660-1660.5 MHz Band between the Mobile-Satellite Service and the Radioastronomy Service
INFORME M.901-2 SPANISH-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS
INFORME M.358-5 SPANISH-1986 PROTECTION RATIOS AND MINIMUM FIELD STRENGTHS REQUIRED IN THE MOBILE SERVICES
INFORME 751 SPANISH-1978 METHODS FOR THE SUBJECTIVE ASSESSMENT OF SPEECH QUALITY IN THE MARITIME MOBILE-SATELLITE SERVICE
INFORME 259-7 SPANISH-1990 VHF IONOSPHERIC PROPAGATION
ITU-R P.1145 SPANISH-1995 Propagation Data for the Terrestrial Land Mobile Service in the VHF and UHF Bands
INFORME M.904-2 SPANISH-1990 AUTOMATIC DETERMINATION OF LOCATION AND GUIDANCE IN THE LAND MOBILE SERVICE
INFORME 509-5 SPANISH-1990 MODULATION AND CODING TECHNIQUE FOR MOBILE SATELLITE SERVICE
ITU-R P.528-2 SPANISH-1986 Propagation curves for aeronautical mobile and radionavigation services using the VHF@ UHF and SHF bands
INFORME 585-4 SPANISH-1990 INTRODUCTION OF DIRECT-PRINTING TELEGRAPH EQUIPMENT IN THE MARITIME MOBILE SERVICE
INFORME 743-1 SPANISH-1982 TRANSMISSION QUALITY ASSESSMENT OF DIGITAL CHANNELS IN MARITIME MOBILE SERVICES
INFORME BS.1203-1 SPANISH-1994 Digital Sound Broadcasting to Vehicular@ Portable and Fixed Receivers Using Terrestrial Transmitters in the UHF/VHF Bands
ITU-R SM.433-5 SPANISH-1992 METHODS FOR THE MEASUREMENT OF RADIO INTERFERENCE AND THE DETERMINATION OF TOLERABLE LEVELS OF INTERFERENCE
ITU-R M.625-3 SPANISH-1995 DIRECT-PRINTING TELEGRAPH EQUIPMENT EMPLOYING AUTOMATIC IDENTIFICATION IN THE MARITIME MOBILE SERVICE
INFORME M.1021 SPANISH-1986 EQUIPMENT CHARACTERISTICS FOR DIGITAL TRANSMISSION IN THE LAND MOBILE SERVICES
ITU-R BS.1194-2 SPANISH-1998 SYSTEMS FOR MULTIPLEXING FREQUENCY MODULATION (FM) SOUND BROADCASTING WITH A SUB-CARRIER DATA CHANNEL HAVING A RELATIVELY LARGE TRANSMISSION CAPACITY FOR STATIONARY AND MOBILE RECEPTION
INFORME 501-5 SPANISH-1990 DIGITAL SELECTIVE-CALLING SYSTEM FOR FUTURE OPERATIONAL REQUIREMENTS OF THE MARITIME MOBILE SERVICE
ITU-R P.616 SPANISH-1986 PROPAGATION DATA FOR TERRESTRIAL MARITIME MOBILE SERVICES OPERATING AT FREQUENCIES ABOVE 30 MHz
ITU-R SA.1345 SPANISH-1998 METHODS FOR PREDICTING RADIATION PATTERNS OF LARGE ANTENNAS USED FOR SPACE RESEARCH AND RADIO ASTRONOMY
ITU-R M.1468 SPANISH-2000 TECHNICAL CHARACTERISTICS AND SHARING SCENARIOS OF SATELLITE SYSTEMS OFFERING MULTIPLE SERVICES
INFORME 1173 SPANISH-1990 TECHNICAL AND OPERATIONAL CONSIDERATIONS FOR AERONAUTICAL MOBILE-SATELLITE COMMUNICATIONS
INFORME M.763-3 SPANISH-1990 Signal level variation due to multipath effects and blockage by ship's superstructure in maritime mobile-satellite service links
ITU-R PI.683 SPANISH-1990 SKY-WAVE FIELD STRENGTH PREDICTION METHOD FOR PROPAGATION TO AIRCRAFT AT ABOUT 500 kHz
ITU-R BS.1116-1 SPANISH-1997 METHODS FOR THE SUBJECTIVE ASSESSMENT OF SMALL IMPAIRMENTS IN AUDIO SYSTEMS INCLUDING MULTICHANNEL SOUND SYSTEMS

American Society of Mechanical Engineers (ASME), m/m/1/n

ASME SEC VIII D2 ART M-1-2002 Article M-1 General Requirements

Association Francaise de Normalisation, m/m/1/n

NF M82-344/A1:1981 MODIFICATIF 1 A NF M 82-344 D'AVRIL 1981.
NF S31-104-1*NF ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1 : M and N categories
NF T77-153:1987 Basic silicones for industrial use. Determinaion of silicon content (silicon content more than 1 per cent (m/m)). Gravimetric method.

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, m/m/1/n

ITU-T E.211 SPANISH-1993 SELECTION PROCEDURES FOR VHF/UHF MARITIME MOBILE SERVICES
ITU-T X.739 SPANISH-1993 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES
ITU-T J.74 SPANISH-1988 METHODS FOR MEASURING THE TRANSMISSION CHARACTERISTICS OF TRANSLATING EQUIPMENTS
ITU-T P.82 SPANISH-1988 METHOD FOR EVALUATION OF SERVICE FROM THE STANDPOINT OF SPEECH TRANSMISSION QUALITY
ITU-T F.126 SPANISH-1988 SELECTION PROCEDURES FOR THE INMARSAT MOBIILE-SATELLITE TELEX SERVICE
ITU-T Z.332 FRENCH-1988 METHODOLOGY FOR THE SPECIFICATION OF THE MAN-MACHINE INTERFACE - GENERAL WORKING PROCEDURE
ITU-T V.23 SPANISH-1988 600/1200-BAUD MODEM STANDARDIZED FOR USE IN THE GENERAL SWITCHED TELEPHONE NETWORK
ITU-T U.24 SPANISH-1988 REQUIREMENTS FOR TELEX AND GENTEX OPERATION TO BE MET BY SYNCHRONOUS MULTIPLEX EQUIPMENT DESCRIBED IN RECOMMENDATION R.44
ITU-T J.67 SPANISH-1994 TEST SIGNALS AND MEASUREMENT TECHNIQUES FOR TRANSMISSION CIRCUITS CARRYING MAC/PACKET SIGNALS OR HD-MAC SIGNALS

Defense Logistics Agency, m/m/1/n

DLA A-A-59515-1999 MITTEN INSERTS, AIRCREW, WOOL, HEAVY, TYPE N-3B [Superseded: DLA MIL-M-6270 C CANC NOTICE 2, DLA MIL-M-6270 C VALID NOTICE 1, DLA MIL-M-6270 C, DLA MIL-M-6270 B, DLA MIL-M-6270 A]
DLA MIL-STD-13231-1999 MARKING OF ELECTRONIC ITEMS [Superseded: DLA MIL-M-13231 C CANC NOTICE 1, DLA MIL-M-13231 C (1), DLA MIL-M-13231 C, DLA MIL-M-13231 B (1), DLA MIL-M-13231 B, DLA MIL-M-13231 A (3), DLA MIL-M-13231 A (2), DLA MIL-M-13231 A, DLA MIL-M-13231]
DLA MIL-DTL-24308/5 M (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS, NONMAGNETIC, CLASS M AND N, SOLDER TYPE
DLA A-A-59396-2000 MILLING MACHINE, COMBINATION HORIZONTAL AND VERTICAL, KNEE TYPE [Superseded: DLA MIL-M-80033 D CANC NOTICE 1, DLA MIL-M-80033 D, DLA MIL-M-80033 C, DLA MIL-M-80033 B, DLA MIL-M-80033 A, DLA MIL-M-80033 (1), DLA MIL-M-80033]
DLA A-A-59665-2001 MORPHOLINE, TECHNICAL [Superseded: DLA O-M-575 A CANC NOTICE 1, DLA O-M-575 A, DLA O-M-00575]
DLA A-A-59302 VALID NOTICE 1-2005 MAGNESIUM OXIDE, TECHNICAL [Superseded: DLA MIL-M-51103 B CANC NOTICE 2, DLA MIL-M-51103 B VALID NOTICE 1, DLA MIL-M-51103 B, DLA MIL-M-51103 A, DLA MIL-M-51103]
DLA A-A-59302-1998 MAGNESIUM OXIDE, TECHNICAL [Superseded: DLA MIL-M-51103 B CANC NOTICE 2, DLA MIL-M-51103 B VALID NOTICE 1, DLA MIL-M-51103 B, DLA MIL-M-51103 A, DLA MIL-M-51103]
DLA A-A-59224 VALID NOTICE 1-2004 METERS, FLUID QUANTITY VOLUMETRIC [Superseded: NAVY GG-M-2802 CANC NOTICE 1, NAVY GG-M-2802]
DLA A-A-59224-1998 METERS, FLUID QUANTITY VOLUMETRIC [Superseded: NAVY GG-M-2802 CANC NOTICE 1, NAVY GG-M-2802]

NATO - North Atlantic Treaty Organization, m/m/1/n

MACP-1 VOL I-2017 GUIDANCE FOR THE NEGOTIATION AND DRAFTING OF INTERNATIONAL CO-OPERATIVE ARMAMENTS ARRANGEMENTS (MEMORANDA OF UNDERSTANDING (MOUs) AND PROGRAMME MOUs) (ED B; Ver. 1)
AMEDP-1.5-2014 IDENTIFICATION OF MEDICAL MATERIEL FOR FIELD MEDICAL INSTALLATIONS (ED A@ Ver. 1)
STANAG 2586-2013 NATO GEOSPATIAL METADATA PROFILE (ED 1)
ARMP-9-2009 GUIDE TO THE MANAGEMENT OF SOFTWARE R&M (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional inf
AMEDP-3.2-2017 MEDICAL INFORMATION COLLECTION AND REPORTING (ED A@ Ver. 1)

TH-TISI, m/m/1/n

TIS 1466-2008 Braking for vehicles of categories m, n and o

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, m/m/1/n

GB/T 26797-2011 Weights of classes E、E、F、F、M、M、M、M and M

Aerospace Industries Association/ANSI Aerospace Standards, m/m/1/n

AIA/NAS NAS 645-1964 Fork, Turnbuckle Clip Locking Superseded - October 1964 (Rev. 4) [Use: DLA MS21252 REV P (1), DLA MS21252 REV P (1), DLA MS21252 REV P, DLA MS21252 REV P, DLA MS21252 REV N ADMIN NOTICE 1, DLA MS21252 REV N ADMIN NOTICE 1, DLA MS21252 REV N, DLA MS2
AIA/NAS NAS 48-1945 Leveling Points Cancelled - December 1945 (Rev. 1) [Use: AIR FORCE MIL-M-6756 CANC NOTICE 1, AIR FORCE MIL-M-6756 CANC NOTICE 1, AIR FORCE MIL-M-6756, AIR FORCE MIL-M-6756]
AIA/NAS NAS 649-1964 Barrel, Turnbuckle Clip Locking Superseded - October 1964 (Rev. 3) [Use: DLA MS21251 REV M (2), DLA MS21251 REV M (2), DLA MS21251 REV M (1), DLA MS21251 REV M (1), DLA MS21251 REV M, DLA MS21251 REV M, DLA MS21251 REV L, DLA MS21251 REV L, DLA MS2125

CH-SNV, m/m/1/n

SN ISO 3521:1984 Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage
SN 213 163-1979
SEV 3044-1964
SN 640 280-1985
SEV 138-1938
SNV 24776-1937
VSM 15355-1955

国家铁路局, m/m/1/n

TB/T 2344.1-2020 Rail Part 1: 43kg/m～75kg/m rail

U.S. Air Force, m/m/1/n

AIR FORCE MS21341 REV G-1982 METER, TIME TOTALIZING HERMETICALLY SEALED 28VDC [Use: NAVY MIL-M-7793 F (1), NAVY MIL-M-7793 F NOTICE 1, NAVY MIL-M-7793 F SUPP 1B, NAVY MIL-M-7793 F, NAVY MIL-M-7793 F SUPP 1A, NAVY MIL-M-7793 E (1), NAVY MIL-M-7793 E SUPP 1, NAVY MIL-M-7793 E

Indonesia Standards, m/m/1/n

CZ-CSN, m/m/1/n

CSN ON 11 1266-1967

HU-MSZT, m/m/1/n

AWS - American Welding Society, m/m/1/n

B2.1-1-233-2006 Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-
B2.1-1/8-231-2002 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1@Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8@Group 1)@1/8 through 1-1
B2.1-1/8-231-2015 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1@ Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8@ Group 1)@ 1/8 inch [3 mm] thro

U.S. Military Regulations and Norms, m/m/1/n

ARMY MIL-DTL-3943 E NOTICE 1-2001 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A
ARMY MIL-DTL-3943 E SUPP 1-1999 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A
ARMY MIL-DTL-3943 E-1999 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A
ARMY MIL-C-63106 A VALID NOTICE 2-2013 Countermeasure, Chaff: M-1
ARMY MIL-C-63106 A NOTICE 1-1996 COUNTERMEASURE, CHAFF: M-1
ARMY MIL-C-63106 A (3)-1993 COUNTERMEASURE, CHAFF: M-1
ARMY MIL-C-63106 A-1983 COUNTERMEASURE, CHAFF: M-1
ARMY MIL-F-12224 J-1989 FOOTWEAR COVERS, TOXICOLOGICAL AGENTS PROTECTIVE, M-1
ARMY MIL-A-44264-1986 ADAPTER KIT, M-1 CAP; FOR CANTEEN, WATER, INSULATED

German Institute for Standardization, m/m/1/n

DIN 8127:2007 Weights of classes E<(Index)1>, E<(Index)2>, F<(Index)1>, F<(Index)2>, M<(Index)1>, M<(Index)1-2>, M<(Index)2>, M<(Index)2-3>, and M<(Index)3> - Metrological and technical requirements (OIML R 111-1:2004)
DIN ISO 362-1:2009 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2007 + Cor. 1:2009)
DIN ISO 362-1:2017 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2015)

United States Navy, m/m/1/n

NAVY A-A-50566-1998 MONITORING DEVICES, EMISSION; STACK RELATED [Superseded: NAVY MIL-M-29190 A CANC NOTICE 2, NAVY MIL-M-29190 A VALID NOTICE 1, NAVY MIL-M-29190 A, NAVY MIL-M-29190 (1), NAVY MIL-M-29190]
NAVY MIL-STD-3001-1-2001 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) [Superseded: NAVY MIL-DTL-23618 H, NAVY MIL-M-23618 G, NAVY MIL-M-23618 F, NAVY MIL-M-23618 E, NAVY MIL-M-23618 D, NAVY MIL-M-23618

Professional Standard - Building Materials, m/m/1/n

JCJ 02-1990 N-M relevant design and calculation chart of steel tube-concrete building unit

Korean Agency for Technology and Standards (KATS), m/m/1/n

KS I ISO 362-1:2020 Measurement of noise emitted by accelerating road vehicles —Engineering method — Part 1: M and N categories

KR-KS, m/m/1/n

KS I ISO 362-1-2020 Measurement of noise emitted by accelerating road vehicles —Engineering method — Part 1: M and N categories

PL-PKN, m/m/1/n

PN T84111-03-1987 Crimping tools for electrical connections Crimping profiles type M and N

International Organization for Standardization (ISO), m/m/1/n

ISO 362-1:2007 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
ISO 362-1:2022 Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories
ISO 362-1:2007/cor 1:2009 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories; Technical Corrigendum 1

Danish Standards Foundation, m/m/1/n

DS/ISO 362-1/Corr. 1:2009 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
DS/ISO 362-1:2007 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories

SAE - SAE International, m/m/1/n

SAE AMS3795/1B-2016 Webbing@ Woven Nylon Fabric 6000 Pounds (26@700 N)@ 1.8 Ounces/Yards (56 g/m)
SAE AMS3795/2B-2016 Webbing@ Woven Nylon Fabric 9000 Pounds (40@050 N)@ 2.5 Ounces/Yards (77.5 g/m)
SAE AMS3853/3A-1993 CORD@ AROMATIC POLYAMIDE@ NONMELTING 550 Pounds (2445 N)@ 165 Foot/Pounds (110 m/kg)
SAE AMS3853/3B-1995 CORD@ AROMATIC POLYAMIDE@ NONMELTING 550 POUNDS (2445 N)@ 165 FOOT/POUNDS (110 M/KG)
SAE AMS3853/2A-1993 CORD@ AROMATIC POLYAMIDE@ NONMELTING 375 Pounds (1670 N)@ 230 Foot/Pounds (155 m/kg)
SAE AMS3853/1A-1993 CORD@ AROMATIC POLYAMIDE@ NONMELTING 100 Pounds (445 N)@ 780 Foot/Pounds (525 m/kg)
SAE AMS3853/1B-1995 CORD@ AROMATIC POLYAMIDE@ NONMELTING 100 POUNDS (445 N)@ 780 FOOT/POUNDS (525 M/KG)
SAE AMS3853/2B-1995 CORD@ AROMATIC POLYAMIDE@ NONMELTING 375 POUNDS (1670 N)@ 230 FOOT/POUNDS (155 M/KG)

Japanese Industrial Standards Committee (JISC), m/m/1/n

JIS D 1024-1:2016 Measurement of noise emitted by accelerating road vehicles -- Engineering method -- Part 1: M and N categories

RU-GOST R, m/m/1/n

GOST R 41.13-2007 Uniform provisions concerning the vehicles of categories M, N and O with regard to braking
GOST R 41.13-1999 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking

ZA-SANS, m/m/1/n

SANS 20013:2004 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
SANS 20013:2009 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
SANS 20104:1998 Uniform provisions concerning the approval of retro-reflective markings for vehicles of category M, N and O

GOSTR, m/m/1/n

GOST ISO 362-1-2017 Measurement of noise emitted by accelerating road vehicles. Engineering method. Part 1. Road vehicles of M and N categories

Professional Standard - Electron, m/m/1/n

SJ/T 11103-1996 Tables for life testing - Tables for (1+1/m)

电子工业部, m/m/1/n

SJ/T 10345.5-1993 Life test table r(1+1/m) numerical table

American Welding Society (AWS), m/m/1/n

AWS B2.1-1/8-231-2015 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8, Group 1), 1/8 inch [3 mm] thro

International Electrotechnical Commission (IEC), m/m/1/n

IEC 60502-1:2004/AMD1:2009 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV); Amendment

Professional Standard - Petrochemical Industry, m/m/1/n

SH/T 0729-2004 Test method for calculation of carbon distribution and strutural group analysis of petroleum oils by the n-d-M method

Society of Automotive Engineers (SAE), m/m/1/n

SAE AMS3853/1-1986 CORD, AROMATIC POLYAMIDE, NONMELTING 100 lb (445 N), 780 ft per lb (525 m/kg)
SAE AMS3853/3-1986 CORD, AROMATIC POLYAMIDE, NONMELTING 550 lb (2445 N), 165 ft per lb (110 m/kg)
SAE AMS3853/2-1986 CORD, AROMATIC POLYAMIDE, NONMELTING 375 lb (1670 N), 230 ft per lb (155 m/kg)

British Standards Institution (BSI), m/m/1/n

BS ISO 362-1:2022 Acoustics. Engineering method for measurement of noise emitted by accelerating road vehicles - M and N categories