ZH
RU
ES

Autoclave Specifications and Dimensions

Autoclave Specifications and Dimensions, Total:220 items.

In the international standard classification, Autoclave Specifications and Dimensions involves: Chipless working equipment, Internal combustion engines for road vehicles, Fasteners, Tyres, Aerospace engines and propulsion systems, Fluid power systems, Switchgear and controlgear, Aerospace fluid systems and components, Pipeline components and pipelines, Iron and steel products, Bottles. Pots. Jars, Cans. Tins. Tubes, Vacuum technology, Sports equipment and facilities, Fluid storage devices, Road vehicle systems, Machine tool systems, Products of non-ferrous metals, Bearings, Linear and angular measurements, Agricultural machines, implements and equipment, Microbiology, Cinematography, Photography, Pumps, Glass, Plastics, Rubber and plastics products, Construction materials, Seals, glands, Transformers. Reactors, Protection of and in buildings, Mechanical structures for electronic equipment, Components for electrical equipment, Electrical accessories, Accident and disaster control, Components for aerospace construction, Railway rolling stock.

Association Francaise de Normalisation, Autoclave Specifications and Dimensions

NF P18-590:1993 Aggregates - Dimensional stability test in a alkali medium - Accelerated Autoclave mortar test
NF E29-728:1971 Vacuum technology - Flat flanges for ultra-high vacuum - Dimensions.
NF E11-106*NF EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics
NF E49-085:2004 Pneumatic fluid power - Five-port directional control valves - Mounting dimensions of subplates
NF E48-550:2010 Fluid power systems - O-rings - Part 2 : housing dimensions for general applications.
NF P78-211-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5 : dimensions and edge finishing.
NF R17-108/A1:2020 Véhicules routiers - Berce interface pour bras hydraulique - Dimensions fonctionnelles et spécifications générales - Amendement 1
NF P83-005*NF EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
NF E48-435*NF ISO 7790:2013 Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 - Clamping dimensions
NF E22-313*NF ISO 3228:2013 Rolling bearings - Cast and pressed housings for insert bearings - Boundary dimensions and tolerances
NF E48-040:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications.
NF E49-035:2010 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes.
NF H96-203:2015 Machines for compacting waste materials or recyclable fractions - Static compactors - Interface between the compaction unit and the container - Functional dimensions and particular specifications
NF A50-630-8:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8 : porthole tubes, tolerances on dimensions and form.

AT-ON, Autoclave Specifications and Dimensions

ONORM M 2065-1982 Hydraulics ; Technical specifications for dimensioning of hydraulic equipment

RU-GOST R, Autoclave Specifications and Dimensions

GOST 16342-1970 250 and 500 kg force rolling heads. Construction and dimensions
GOST 5927-1970 Hexagon nuts (high precision). Construction and dimensions
GOST 26650-1985 Single rod hydraulic cylinders for nominal pressure 16 MPa. Mounting dimensions
GOST 5931-1970 Hexagon domed nuts (high precision). Construction and dimensions
GOST 16341-1970 Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 713-1988 Screw presses. Parameters and dimensions, norms of accuracy
GOST 16339-1970 Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
GOST 16340-1970 Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 17387-1972 Guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 9753-1988 Hydraulic gap presses. Parameters and dimensions. Norms of accuracy
GOST 17385-1972 Guide pins of plastic moulds and die casting dies. Construction and dimensions
GOST 2524-1970 Hexagon nuts with reduced width across flats (high precision). Constructions and dimensions
GOST 17131-1971 Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 1000 to 1200 mm, width 700; 800 mm, height 450; 500 mm. Construction and dimensions
GOST 13165-1967 Compression springs for machine retaining devices. Design and dimensions
GOST 14676-1983 Sheet stamping dies. Guide ball assemblies for dies. Design and dimensions
GOST 17386-1972 Step-shaped guide pins of plastics moulds and die casting dies. Construction and dimensions
GOST 17389-1972 Step-shaped guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 16718-1971 Flanged shanks for dies sheet pressing. Construction and dimensions
GOST 16719-1971 Floating shanks for dies of sheet pressing. Construction and dimensions
GOST 15015-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length 2000; 2200 mm, width from 1200 to 1800 mm, height from 500; 600 mm. Construction and dimensions
GOST 17128-1971 Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 400 to 500 mm, width from 300 to 500 mm, height from 100 to 250 mm. Construction and dimensions
GOST 15004-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length from 900 to 1200 mm, width 700; 800 mm, height from 150 to 400 mm. Construction and dimensions
GOST 15010-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length from 1600 to 2000 mm, width 1000; 1200 mm, height from 200 to 400 mm. Construction and dimensions
GOST 17129-1971 Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 600 to 900 mm, width from 500 to 700 mm, height from 125 to 400 mm. Construction and dimensions
GOST 13071-1967 Carrage holders for nipping laminated wide cutters. Design and dimensions
GOST 13621-1990 Extruded rectangular equishelf H-beam section shapes of aluminium and magnesium alloys. Dimensions
GOST 13622-1991 Extruded rectangular equishelf T-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13219.15-1981 Hign cups with grooves for fat, diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
GOST 13219.16-1981 High cups with grooves for, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
GOST 14979-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length from 600 to 900 mm, width from 500 to 700 mm, height from 125 to 400 mm. Construction and dimensions
GOST 14993-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length from 2400 to 3000 mm, width from 1600 to 2000 mm, height from 300 to 400 mm. Construction and dimensions
GOST 15002-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length from 600 to 900 mm, width from 500 to 700 mm, height from 125 to 400 mm. Construction and dimensions
GOST 14817-1969 Stamped go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions
GOST R 50191-1992 Hydraulic fluid power. Quick-action couplings. Mounting dimensions and technical requirements
GOST 11413-1975 Blacksmith's hand and hammer tools. Flat flatters. Design and dimensions
GOST 13738-1991 Extruded rectangular unequishelf angle-section shapes of aluminium and magnesium alloys. Dimensions
GOST 14982-1969 Rectangular steel all-cast mouldling boxes having inside dimensions: length 1000; 1200 mm, width 800 mm, height 450; 500 mm. Construction and dimensions
GOST 14991-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length 2000; 2200 mm, width from 1200 to 1800 mm, height from 300 to 400 mm. Construction and dimensions
GOST 14994-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length from 2400 to 3000 mm, width from 1600 to 2000 mm, height 500; 600 mm. Construction and dimensions
GOST 15005-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length 1000; 1200 mm, width 800 mm, height 450; 500 mm. Construction and dimensions
GOST 15014-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length 2000; 2200 mm, width from 1200 to 1800 mm, height from 300 to 400 mm. Construction and dimensions
GOST 15017-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length from 2400 to 3000 mm, width from 1600 to 2000 mm, height 500; 600 mm. Construction and dimensions
GOST 13219.3-1981 High vague end cups for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
GOST 13219.4-1981 High vague end cups for diameters from 110 till 400 mm of pillow blocks. Constuction and dimensions
GOST 15007-1969 Circular iron all-cast moulding boxes having inside diameter 800; 1000 mm, height 500 mm. Construction and dimensions
GOST 14977-1969 Combined rectangular steel all-cast moulding boxes having inside dimensions: length 500 mm, width 400 mm, height 150; 200 mm. Construction and dimensions
GOST 14988-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length from 1600 to 2000 mm, width 1000; 1200 mm, height 450; 500 mm. Construction and dimensions
GOST 15000-1969 Combined rectangular iron all-cast moulding boxes having inside dimensions: length 500 mm, width 400 mm, height 150; 200 mm. Construction and dimensions
GOST 13624-1990 Extruded rectangular flanged channel-section shapes of aluminium and magnesium alloys. Dimensions
GOST 17391-1972 Supports for guide pins and guide bushings of plastics moulds die casting dies. Construction and dimensions
GOST 16717-1971 Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions
GOST 14980-1969 Circular steel all-cast moulding boxes having inside diameter 600 mm, height from 125 to 300 mm. Construction and dimensions
GOST 14989-1969 Circular steel all-cast moulding boxes having inside diameter 1200 mm, height from 200 to 400 mm. Construction and dimensions
GOST 15012-1969 Circular iron all-cast moulding boxes having inside diameter 1200 mm, height from 200 to 400 mm. Construction and dimensions
GOST 14986-1969 Rectangular steel all-cast moulding boxes having inside dimensions: length 1200; 1400 mm, width 900; 1000 mm, height 450; 500 mm. Construction and dimensions
GOST 15009-1969 Rectangular iron all-cast moulding boxes having inside dimensions: length 1200; 1400 mm, width 900; 1000 mm, height 450; 500 mm. Construction and dimensions
GOST 14820-1969 Stamped go plain plug gauges of not full-form with diameter over 100 to 160 mm. Design and dimensions
GOST 15862-1981 Plate blanks round of die sets for sheet stamping dies for dividing operations. Construction and dimensions
GOST 18070-1972 Clamping bushings with a shoulder for tools with a cylindrical tail. Design and dimensions
GOST 18076-1972 Arbors for changeable cutter arbors and clamping bushings for turret automatics. Design and dimensions
GOST 14984-1969 Circular steel all-cast moulding boxes having inside diameter 800; 1000 mm, height 500 mm. Construction and dimensions
GOST 14821-1969 Stamped no-go plain plug gauges of not full-form with diameter over 75 to 160 mm. Design and dimensions
GOST 13219.9-1981 High cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
GOST 13219.10-1981 High cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
GOST 18073-1972 Arbors for tangential cutters and clamping bushings for turret automatics. Design and dimensions
GOST 18075-1972 Arbors for the skew fixing of cutters and clamping bushing for turret lathes. Design and dimensions
GOST 12819-1980 Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 14996-1969 Rectangular iron all-cast moulding boxes with simplified wall profile having inside dimensions: length from 400 to 500 mm, width from 300 to 400 mm, height from 75 to 200 mm. Construction and dimensions
GOST 12820-1980 Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1to 25 kgf/sq sm). Design and dimensions
GOST 12817-1980 Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 14677-1983 Sheet stamping dies. Plates-blanks for dies with four guide assemblies. Design and dimensions
GOST 12821-1980 Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/sq sm). Design and dimensions
GOST 20159-1974 Pattern plates with changeable wooden inserts for moulding box having inside dimensions 100x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 14997-1969 Circular iron all-cast moulding boxes with simplified wall profile having inside diameter 400; 500 mm, height from 75 to 200 mm. Construction and dimensions
GOST R 54432-2011 Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 51544-2000 Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control

Korean Agency for Technology and Standards (KATS), Autoclave Specifications and Dimensions

KS R ISO 13296:2010 Diesel engines-High-pressure fuel injection pipe assemblies-General requirements and dimensions
KS R ISO 13296:2015 Diesel engines－High-pressure fuel injection pipe assemblies－General requirements and dimensions
KS B ISO 7790:2006 Hydraulic fluid power－Four－port modular stack valves and four－port directional control valves, sizes 02, 03 and 05－Clamping dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Autoclave Specifications and Dimensions

GB/T 2978-2014 Size designation, dimensions,inflation pressure and load capacity for passenger car tyres
GB/T 2978-2008 Size designation,dimensions,inflation pressure and load capacity for passenger car tyres
GB/T 2979-2008 Agricultural Tire Specifications, Dimensions, Air Pressures and Loads
GB/T 16622-2009 Size esignation, dimensions and load capacity for pressed-on solid tyres
GB/T 16622-2022 Size designation, dimensions and load capacity for pressed-on solid tyres
GB/T 2980-2001 Designation,dimensions,Inflation pressure and load for earth-mover tyres
GB/T 2977-2008 Size designation, dimensions, inflation pressure and load capacity for truck tyres
GB/T 2977-2016 Truck tire specification, size, air pressure and load
GB/T 2980-2009 Size designation,dimensions,inflation pressure and load capacity for earth-mover tyres
GB/T 2982-2014 Designation,dimensions,inflation pressure and load capacity of pneumatic tyres for industrial vehicles
GB/T 2982-2001 Designation,dimensions,inflation pressure and load capacity of pneumatic tyres for industrial vehicles

Society of Automotive Engineers (SAE), Autoclave Specifications and Dimensions

SAE AS1875-1992 Boss, Low Pressure (500 psi) Standard Dimensions for
SAE J744-2013 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J2704-2010 Tire Normal Force/Deflection and Gross Footprint Dimension Test
SAE J2337-2-2002 Connections for Fluid Power and High Pressure Use Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 2: Stud End Requirements, Dimensions, Design, and Test Methods
SAE J2337-2-2012 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Rings Sealing Part 2: Stud End Requirements, Dimensions, Design and Test Methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Autoclave Specifications and Dimensions

GB/T 2979-2017 Size designation, dimensions, inflation pressure and load capacity for agricultural tyres

International Organization for Standardization (ISO), Autoclave Specifications and Dimensions

ISO 13296:2012 Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions
ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
ISO 7790:2013 Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 - Clamping dimensions
ISO 6362-3:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 3: Extruded rectangular bars - Tolerances on shape and dimensions
ISO 14541:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
ISO 3228:2013 Rolling bearings - Cast and pressed housings for insert bearings - Boundary dimensions and tolerances
ISO 6722-3:1993 Road vehicles; unscreened low-tension cables; part 3: conductor sizes and dimensions for thick-wall insulated cables
ISO 6722-4:1993 Road vehicles; unscreened low-tension cables; part 4: conductor sizes and dimensions for thin-wall insulated cables
ISO 6362-4:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 4: Profiles - Tolerances on shape and dimensions
ISO 14540:2013 Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
ISO 3245:2015 Rolling bearings - Needle roller bearings with drawn cup and without inner ring - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 7790:1986 Hydraulic fluid power; Four-port modular stack valves and four-port directional control valves, sizes 03 and 05; Clamping dimensions
ISO 6362-5:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 5: Round, square and hexagonal bars - Tolerances on shape and dimensions

British Standards Institution (BSI), Autoclave Specifications and Dimensions

BS ISO 13296:2012 Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft
BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies. Dimensions and requirements
BS EN 10108:2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
BS ISO 9057:1995 Glass containers - 28mm tamper-evident finish for pressurized liquids - Dimensions
BS EN 13461:2009 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
BS ISO 3669:2017 Vacuum technology. Bakeable flanges. Dimensions of knife-edge flanges
BS DD ISO/TS 3669-2:2008 Vacuum technology - Bakable flanges - Dimensions of knife-edge flanges
BS 5276-4:1977 Pressure vessel details (dimensions) - Standardized pressure vessels
BS 5276-1:1984 Pressure vessel details (dimensions) - Specification for davits for branch covers of steel vessels
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
BS EN ISO 2858:1993 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN ISO 2858:2010 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN 61021-1:1997 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment. Specification for dimensions
BS 4742-6:1988 Hydraulic equipment for agricultural machinery - Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
BS ISO 6099:2009 Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
BS ISO 8140:2009 Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
BS ISO 6547:2002 Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
BS ISO 3228:2013 Rolling bearings. Cast and pressed housings for insert bearings. Boundary dimensions and tolerances
BS 6600-1:1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using YEI-1 laminations
BS ISO 7790:1998 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions
BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
BS EN 61021-1:1990 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions
BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
BS ISO 5597:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS EN 2585:2001 Aerospace series - Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner - Elevated load at ambient temperature - Dimensions and loads
BS EN 4535-2:2009 Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2:Dimensions and loads - Inch series
BS EN 14535-1:2005+A1:2011 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
BS ISO 13726:2008 Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions
BS ISO 3245:2023 Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
21/30424574 DC BS ISO 3245 AMD1. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values

German Institute for Standardization, Autoclave Specifications and Dimensions

DIN 24482:1992 Horizontal cold chamber die-casting-machines; sizes, main dimensions
DIN 20066:2018-03 Hydraulic fluid power - Hose assemblies - Dimensions, requirements
DIN 20066:2012 Hydraulic fluid power - Hose assemblies - Dimensions, requirements
DIN 20066:2017 Hydraulic fluid power - Hose assemblies - Dimensions, requirements
DIN ISO 15552 Berichtigung 1:2010 Pneumatik fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions (ISO 15552:2004), Corrigendum to DIN ISO 15552:2005-12
PAS 1065-2007 Spirally wounded pipes made from Polyethylene(PE 100) tangentially extruded Dimensions,technical requirements and tests
DIN 16941:2012 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN 18195-7:2009 Water-proofing of buildings - Part 7: Water-proofing against pressing water from the inside, dimensioning and execution
DIN EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis (IEC 60297-3-105:2008); German version EN 60297-3-105:2009
DIN ISO 4395:2011 Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009 + Cor. 1:2010)
DIN 16940:2009 Plastics - Extruded hoses of plasticized polyvinylchloride (PVC-P) - Permissable deviations for dimensions for which tolerances are not indicated
DIN 43620-4:1981 Low-voltage high-rupturing-capacity fuses with blade contacts 500 and 660 V a.c. and 440 d.c.; replacement handle for the sizes 00 up to 3; dimensions of the engaging part
DIN ISO 3601-2:2010 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
DIN EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature; German version EN 15818:2011
DIN 618:2022-10 Rolling bearings - Needle roller bearings with drawn cup and cage - Boundary dimensions, geometrical product specification (GPS) and tolerance values
DIN EN ISO 2858:2011 End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions (ISO 2858:1975); German version EN ISO 2858:2010
DIN EN 10243-2 Corrigendum 1:2005 Steel die forgings Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines Corrigendum 1 to English version of DIN EN 10243-2:2000-06

ZA-SANS, Autoclave Specifications and Dimensions

SANS 62271-301:2010 High-voltage switchgear and controlgear Part 301: Dimensional standardisation of high-voltage terminals

国家市场监督管理总局、中国国家标准化管理委员会, Autoclave Specifications and Dimensions

GB/T 2980-2018 Size designation，dimensions,inflation pressure and load capacity for earth-mover tyres
GB/T 39831-2021 Hydraulic fluid power—Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10—Clamping dimensions

IN-BIS, Autoclave Specifications and Dimensions

American Society for Testing and Materials (ASTM), Autoclave Specifications and Dimensions

ASTM F473-09 Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
ASTM F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.

American National Standards Institute （ANSI), Autoclave Specifications and Dimensions

ANSI/ASTM F2969:2012 SPECIFICATION FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS) IPS DIMENSIONED PRESSURE PIPE
ANSI/ASAE S418.1-2010 Dimensions for Cylindrical Hydraulic Couplers for Lawn and Garden Tractors
ANSI/SLAS 2-2004 Microplates - Height Dimensions, (formerly recognized as ANSI/SBS 2-2004)
ANSI IT7.212-1989 Audiovisual Systems - Overhead Projectors - Transparencies and Transparency frames (Dimensions)

SAE - SAE International, Autoclave Specifications and Dimensions

SAE J744-1995 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-1988 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-1983 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-2021 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-2016 Hydraulic Pump and Motor Mounting and Drive Dimensions

未注明发布机构, Autoclave Specifications and Dimensions

SAE J744-201610 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-198310 Hydraulic Pump and Motor Mounting and Drive Dimensions
BS EN ISO 13225:2012(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment ; Height gauges — Design and metrological characteristics

IT-UNI, Autoclave Specifications and Dimensions

Japanese Industrial Standards Committee (JISC), Autoclave Specifications and Dimensions

JIS D 2502-1:2009 Automotive parts -- Pressure caps and filler necks for radiators -- Part 1: Dimensions
JIS B 1536-2:2019 Rolling bearings -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values of needle roller bearings -- Part 2: Drawn cup without inner ring

European Committee for Standardization (CEN), Autoclave Specifications and Dimensions

EN ISO 2858:2010 End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions
EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
CEN EN 755-3-2008_ Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 3: Round bars, tolerances on dimensions and form

CY-CYS, Autoclave Specifications and Dimensions

CYS 104 Pt.1-1985 SPECIFICATION FOR HIGH DENSITY POLYETHYLENE (HDPE) PIPES FOR AGRICULTURAL APPLICATIONS Part 1: Dimensions and Pressure Ratings

CENELEC - European Committee for Electrotechnical Standardization, Autoclave Specifications and Dimensions

EN 50043:1985 Low-voltage switchgear and controlgear for industrial use Size numbers and gauges for flat connections

BE-NBN, Autoclave Specifications and Dimensions

CU-NC, Autoclave Specifications and Dimensions

NC 09-04-28-1985 Unified Elements System of olds, Dies, Stampers and achining Devices. Machiningevice. Striate-Head Fixed upport. Main Dimensions nd Design Specifications
NC 09-04-13-1985 Unified Elements System of Molds, Dies, Stampers and Devices. Lever. Main Dirnensions and Design Specifications
NC 09-04-14-1985 Unified Elements System of Molds, Dies, Stampers and Devices. Ring. Main Dimensions and Design Specifications
NC 09-04-27-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Spherical-Head Fixed Support. Main Dimensions and Design Specifications
NC 09-04-29-1985 Unified Elements System of Molds, Dies, Stampers and Machining Machining Devices. Machining Devices. Bearing Washer. Main Dimensions and Design scpecifications
NC 09-04-24-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Spherical Washer Main Dimensions. Design Specifications
NC 09-04-22-1985 Unified Elements System of Molds, Dies, Stampers and_ Machining Devices. Machining, Device. Eccentric for LeVer br Axis. Main Dimensions. Design Specifications
NC 09-04-25-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Conical Washer. Main Dimensions. Design Specifications
NC 09-04-21-1985 Unified Elements System of Molds, Dies, Stampers and Machining Devices. Machining Device. Threaded Cap. Main Dimensions and Design Specifications
NC 09-04-35-1987 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Adjustable Support with Milled Head. Design Specifications
NC 09-04-26-1985 Unified Elements System of Molds Dies, Stampers and Machining Devices. Machining Device Fixed Support with Flat Head Main Dimensions and Design Specifications

Danish Standards Foundation, Autoclave Specifications and Dimensions

DS/EN 50043:1994 Low voltage switchgear and controlgear for industrial use - Size numbers and gauges for flat connections
DS/ISO 7790:1989 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 03 and 05. Clamping dimensions

PK-PSQCA, Autoclave Specifications and Dimensions

PS 1636-1984 SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC) FITT-INGS WITH PLAIN SOCKETS FOR PIPES UNDER PRESS-URE-DIMENSIONS OF SOCKETS-METRIC SERIES.

AENOR, Autoclave Specifications and Dimensions

UNE 26115-3:1996 ROAD VEHICLES. UNSCREENED LOW-TENSION CABLES. PART 3: CONDUCTOR SIZES AND DIMENSIONS FOR THICK-WALL INSULATED CABLES.
UNE 26115-4:1996 ROAD VEHICLES. UNSCREENED LOW-TENSION CABLES. PART 4: CONDUCTOR SIZES AND DIMENSIONS FOR THIN-WALL INSULATED CABLES.