ZH
RU
ES

How to calibrate the measuring instrument

How to calibrate the measuring instrument, Total:101 items.

In the international standard classification, How to calibrate the measuring instrument involves: Linear and angular measurements, Metrology and measurement in general, Vocabularies, Analytical chemistry, Radiation protection, Optical equipment, Radiation measurements, Optics and optical measurements, Road engineering, Cereals, pulses and derived products, Non-destructive testing, Inks. Printing inks, Tobacco, tobacco products and related equipment, Aircraft and space vehicles in general, Petroleum products in general, Lubricants, industrial oils and related products, Resistors.

机械工业部, How to calibrate the measuring instrument

JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

German Institute for Standardization, How to calibrate the measuring instrument

DIN EN ISO 10360-4:2003 Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode (ISO 10360-4:2000 + Cor. 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-4
DIN 2241:2018-07 Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN ISO/TS 23165:2008 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
DIN EN ISO 10360-1:2003 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002
DIN EN ISO 14253-5:2016-12 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN 2241:2018 Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN 2241:2006 Geometrical product specifications (GPS) - Screw setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN EN ISO 7971-2:2019-06 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019); German version EN ISO 7971-2:2019
DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN EN ISO 14253-5:2016 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)
DIN EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010

TR-TSE, How to calibrate the measuring instrument

TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

International Organization for Standardization (ISO), How to calibrate the measuring instrument

ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
ISO/TS 15530-1:2013 Geometrical product specifications (GPS).Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO 7503-3:2016 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 3: Apparatus calibration
ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO/TR 14253-6:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

Danish Standards Foundation, How to calibrate the measuring instrument

DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DS/EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments

SE-SIS, How to calibrate the measuring instrument

SIS SEN 06 03 51-1968 Marking of terminals on fixed electrical measuring instruments

British Standards Institution (BSI), How to calibrate the measuring instrument

BS DD ISO/TS 23165:2007 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Uncertainty in verification testing of indicating measuring instruments
BS ISO 7503-3:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination. Apparatus calibration
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Method of traceability for measuring instruments through reference to the international standard instrument
BS EN ISO 7971-2:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
BS 5381-2:1998 Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus

Korean Agency for Technology and Standards (KATS), How to calibrate the measuring instrument

KS B ISO 15530-3:2005 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2014 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2015 Geometrical Product Specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards
KS B ISO 10360-4:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 4:CMMs used in scanning measuring mode
KS B ISO 10360-4:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode
KS B ISO 10360-3:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 3:CMMs with the axis of a rotary table as the fourth axis
KS B ISO 10360-3:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis
KS B ISO 10360-8-2017(2022) Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring systems(CMS) — Part 8: CMMs with optical distance sensors
KS C 5115-71-2001 Fixed resistors for use in electronic equipment-Part 7:Blank detail specification:Fixed resistor networks in whichnot all resistors are individually measurable Assesment level E
KS C 5115-61-2001 Fixed resistors for use in electronic equipment-Part 6:Blank detail specification:Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation Assessment level E

American Society for Testing and Materials (ASTM), How to calibrate the measuring instrument

ASTM E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
ASTM E1791-96(2021) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
ASTM E1791-96(2014) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
ASTM E2214-16 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2214-19 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E1154-89(1997) Standard Specification for Piston or Plunger Operated Volumetric Apparatus
ASTM E2214-08 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2214-18 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2214-17 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2214-20 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E1710-97 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1710-05 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
ASTM D6531-00(2019) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM D6399-10 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
ASTM D5291-02(2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D8406-22 Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement

European Committee for Standardization (CEN), How to calibrate the measuring instrument

CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

ES-UNE, How to calibrate the measuring instrument

UNE-EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)

PL-PKN, How to calibrate the measuring instrument

PN-EN ISO 14253-5-2016-01 P Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)

国家市场监督管理总局、中国国家标准化管理委员会, How to calibrate the measuring instrument

GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
GB/T 18779.6-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to calibrate the measuring instrument

GB/T 42646-2023 Layout and measurement method of spaceborne laser altimeter site calibration detector

Association Francaise de Normalisation, How to calibrate the measuring instrument

NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
NF EN ISO 10360-10:2021 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnels (SMT) - Partie 10 : laser de poursuite
NF EN ISO 25178-701:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 701 : étalonnage et étalons de mesure pour les instruments à contact (à palpeur)
NF E05-031-701*NF EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments.
FD E10-201-6*FD ISO/TR 14253-6:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces
NF V03-719-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2 : method of traceability for measuring instruments through reference to the international standard instrument.
NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact
NF EN ISO 25178-604:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : caractéristiques nominales des instruments sans contact (à interférométrie par balayage à cohérence)
NF EN ISO 7971-2:2019 Céréales - Détermination de la masse volumique, dite masse à l'hectolitre - Partie 2 : méthode de raccordement des instruments de mesure à l'étalon international

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How to calibrate the measuring instrument

IEEE N42.23-1996 American National Standard Measurement and Associated Instrument Quality Assurance for Radioassay Laboratories

CEN - European Committee for Standardization, How to calibrate the measuring instrument

EN ISO 7971-2:2019 Cereals - Determination of bulk density@ called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to calibrate the measuring instrument

GB/T 33523.701-2017 Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) instruments

Lithuanian Standards Office , How to calibrate the measuring instrument

LST EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
LST EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)

AENOR, How to calibrate the measuring instrument

UNE-EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
UNE-EN ISO 7971-2:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)

AT-ON, How to calibrate the measuring instrument

ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity

RU-GOST R, How to calibrate the measuring instrument

GOST 8.201-1976 State system for ensuring the uniformity of measurements. The state special standard and all-union verification schedule for means measuring instruments of maximum-energy flux of stopping radiation at photon energy from 0,8 to 8,0 pJ (5 to 50 MeV)