ZH
RU
ES

About Test Granularity

About Test Granularity, Total:364 items.

In the international standard classification, About Test Granularity involves: Pesticides and other agrochemicals, Ceramics, Air quality, Particle size analysis. Sieving, Fuels, Road vehicle systems, Road engineering, Construction materials, Leather technology, Linear and angular measurements, Analytical chemistry, Metalliferous minerals, Power stations in general, Animal feeding stuffs, Clothes, Environmental protection, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Domestic, commercial and industrial heating appliances, Mining and quarrying, Products of the chemical industry, Medical equipment, Rubber, Valves, Test conditions and procedures in general, Products of the textile industry, Special purpose vehicles, Testing of metals, Gas and steam turbines. Steam engines, Tyres, Wood, sawlogs and sawn timber, Physics. Chemistry, Refractories, Wood-based panels, Structures of buildings, Ventilators. Fans. Air-conditioners, Powder metallurgy, Water quality, Surface treatment and coating, Pharmaceutics, Wastes, Welding, brazing and soldering, Lubricants, industrial oils and related products, Installations in buildings, Protection against dangerous goods, Protective equipment, Lubrication systems, Paints and varnishes.

AENOR, About Test Granularity

UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN 12457-4:2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
UNE-EN 12457-2:2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
UNE-EN 405:2002+A1:2010 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-EN 13443-2:2005+A1:2008 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 μm to less than 80 μm - Requirements for performance, safety and testing

SE-SIS, About Test Granularity

SIS SS 13 21 14-1978 Concrete testing — Aggregate — Grain density

German Institute for Standardization, About Test Granularity

DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN ISO 13982-2:2005-03 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
DIN EN ISO 17892-3:2016-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN CEN/TS 17189:2018-08*DIN SPEC 78003:2018-08 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry; German version CEN/TS 17189:2018
DIN EN ISO 14644-2:2016-05 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015); German version EN ISO 14644-2:2015
DIN EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
DIN EN ISO 10808:2011-04 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010); German version EN ISO 10808:2010
DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DIN EN 12457-1:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN 18124:1997 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer
DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
DIN EN 1827:2009-11 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999+A1:2009
DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN EN ISO 29463-3:2019-05 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011); German version EN ISO 29463-3:2018
DIN EN 405:2009-08 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001+A1:2009
DIN EN ISO 29463-5:2022-10 High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements (ISO 29463-5:2022); German version EN ISO 29463-5:2022
DIN 18124:2011 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer, gas pycnometer
DIN EN 12341:2023-10 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2023
DIN 58621:2011-10 Respiratory protective devices - Reactorfilters for protection against radioactive Methyliodide and radioactive particles - Requirements, testing, marking
DIN EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011); German and English version prEN ISO 29463-3:2018
DIN EN ISO 29463-3:2019 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011)
DIN EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2013
DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 1097-6 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005, Corrigendum to DIN EN 1097-6:2005-12
DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 13443-2:2007-10 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing; German version EN 13443-2:2005+A1:2007
DIN EN 1097-7 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008, Corrigendum to DIN EN 1097-7:2008-06
DIN EN ISO 17892-3:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015

IT-UNI, About Test Granularity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, About Test Granularity

GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm

American Society for Testing and Materials (ASTM), About Test Granularity

ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM C544-92(1998)e1 Standard Test Method for Hydration of Magnesite or Periclase Grain
ASTM C544-03(2017) Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM C544-18 Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
ASTM F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F1394-92(1999) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F1394-92(2020) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D5955-96 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5955-02(2017)e1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM F22-65(1998) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F2299/F2299M-03(2017) Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM E389-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM B822-97 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM E276-98 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM B822-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-20 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM D6814-02(2008) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D6814-02(2013) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM B822-10 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B797-20 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM B761-98 Standard Test Method for Particle Size Distribution of Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D8353-20 Standard Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate
ASTM B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

Japanese Industrial Standards Committee (JISC), About Test Granularity

JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS B 9920-2:2019 Cleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration

PL-PKN, About Test Granularity

PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
PN Z04002 Arkusz 04-1974 Air purity protection Tests of dust physical properties Determination of static surface and statical surface dimension and pores dimension of dust particles
PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid
PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry

Military Standard of the People's Republic of China-General Armament Department, About Test Granularity

GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method
GJB 380.5-1987 Aircraft hydraulic system contamination test using microscope counting method to determine oil solid particle contamination degree
GJB 380.5A-2015 Aviation working fluid contamination test Part 5: Determination of solid particle contamination by microscopic counting method
GJB 380.8A-2015 Aviation working fluid contamination test Part 8: Determination of solid particle contamination by microscopic contrast method

British Standards Institution (BSI), About Test Granularity

BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 14644-12:2018 Cleanrooms and associated controlled environments - Specifications for monitoring air cleanliness by nanoscale particle concentration
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS EN 1097-6:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
BS EN ISO 14644-2:2015 Tracked Changes. Cleanrooms and associated controlled environments. Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
16/30348371 DC BS ISO 14644-12. Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness by nanoscale particle concentration
BS EN 1097-7:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
BS EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air. Testing flat sheet filter media
BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS EN 1193:1998 Timber structures - Structural timber and glued laminated timber - Determination of shear strength and mechanical properties perpendicular to the grain
20/30392580 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
20/30424361 DC BS EN 1097-7. Tests for mechanical and physical properties of aggregates - Part 7. Determination of the particle density of filler. Pyknometer method
BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler — Pyknometer method
BS EN ISO 10722:2019 Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (laboratory test method)
16/30342154 DC BS ISO 29463-1. High Efficiency Filters and Filter Media for Removing Particles from Air. Part 1. Classification, performance, testing and marking
BS EN ISO 29463-4:2018 High-efficiency filters and filter media for removing particles in air. Test method for determining leakage of filter elements. Scan method
BS 7403-4:1998 Full-flow lubricating oil filters for internal combustion engines. Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
18/30338840 DC BS EN ISO 10722. Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (Laboratory test method)
BS EN 17199-1:2019 Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Requirements and choice of test methods
BS EN ISO 11125-5:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure
BS EN ISO 11125-5:2018 Tracked Changes. Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, About Test Granularity

GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
GJB 380.5A-2004 Contamination test method of operating liquid for aviation Part 5:Determination of solid particle contamination level by counting method using a microscope
GJB 380.8A-2004 Contamination test method of operating fluid for aviation Part 8:Determination of solid particle contamination level by compare method using a microscope

Professional Standard - Aviation, About Test Granularity

HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
HB 5931.5-1986 Determination of solid particle pollution degree of working fluid by microscopic counting method for pollution test of aircraft hydraulic system

International Organization for Standardization (ISO), About Test Granularity

ISO/CD 19996 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
ISO/DIS 19996:2011 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
ISO 105-Z05:1996 Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 14644-12:2018 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
ISO 13061-5:2020 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO/CD 29463-1:2023 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
ISO/DIS 29463-1:2023 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
ISO 11127-2:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution
ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution
ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution

The American Road & Transportation Builders Association, About Test Granularity

AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

Standard Association of Australia （SAA）, About Test Granularity

AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS ISO 14644.2:2017 Cleanrooms and associated controlled environments, Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
AS 1774.2:2001(R2013)
AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials

Indonesia Standards, About Test Granularity

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI 03-1753-1990 Coarse aggregates for concrete, Determination of fine grain smaller than 70 mikron
SNI 03-1754-1990 Fine aggregates for mix and concrete, Determination of fine grain smaller than 50 mikron
SNI 13-6341-2000 Determination of curve related to liberation degree with particle sizes of milling product minerals
SNI 7117.13-2009

Association of German Mechanical Engineers, About Test Granularity

VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 4203 Blatt 3-2010 Testing of automated measuring systems - Test procedures for point-related ambient air measuring systems for gaseous and particulate air pollutants
VDI 4206 Blatt 2-2015 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4206 Blatt 2-2011 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4202 Blatt 1-2010 Performance criteria for performance tests of automated ambient air measuring systems - Point-related measurement methods for gaseous and particulate air pollutants

AASHTO - American Association of State Highway and Transportation Officials, About Test Granularity

T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures (Twentieth Edition; ASTM D2489-67(1980))

CZ-CSN, About Test Granularity

CSN 79 3822-1961 Testing of leathers. Strength of leather grain at double bending
CSN 79 3832-1994 Testing of leathers. Distension and strength of leathers grain. The balí burst test
CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)

NO-SN, About Test Granularity

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

Korean Agency for Technology and Standards (KATS), About Test Granularity

KS M ISO 3379-2016(2021) Leather－Determination of distension and strength of grain－Ball burst test
KS I ISO 14644-12:2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS I ISO 14644-2-2017(2022) Cleanrooms and associated controlled environments — Part 2:Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density
KS B ISO 29463-1:2021 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
KS C IEC 60332-1-3-2014(2019) Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/

European Committee for Standardization (CEN), About Test Granularity

PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
PD CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN ISO 11125-2:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 2: Determination of Particle Size Distribution
EN ISO 11127-2:1997 Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives - Part 2: Determination of Perticle Size Distribution ISO 11127-2: 1993

Danish Standards Foundation, About Test Granularity

DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DS/EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DS/CEN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method (ISO/TS 17892-3:2004)
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
DS/EN 12457-4:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
DS/EN 405+A1:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
DS/EN 13443-2+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

Association Francaise de Normalisation, About Test Granularity

NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF P94-512-3*NF EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3 : determination of particle density
NF EN ISO 17892-3:2015 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 3 : détermination de la masse volumique des particules solides
NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
NF X44-101-2*NF EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2 : monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
NF EN 13205-6:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 6 : essais de manipulation et de transport
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF P94-057:1992 Soils investingation and testing. Granulometric analysis. Hydrometer method.
NF EN ISO 14644-2:2016 Salles propres et environnements maîtrisés apparentés - Partie 2 : surveillance du maintien des performances de la salle propre pour la propreté particulaire de l'air
NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF EN ISO 10801:2011 Nanotechnologies - Génération de nanoparticules de métal pour essais de toxicité par inhalation en utilisant la méthode de condensation/évaporation
NF EN 13205-2:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 2 : essai de performances en laboratoire par détermination par l'...
NF P18-650-7*NF EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.
NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
NF X44-014-3*NF EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air - Part 3 : testing flat sheet filter media
NF EN ISO 29462:2022 Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité en fonction de la taille des particules et de la résistance à l'écoulement de l'air
NF A88-200-1*NF EN ISO 15011-1:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1 : determination of fume emission rate during arc welding and collection of fume for analysis.
NF EN ISO 11125-5:2018 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 5 : détermination du pourcentage de particules défectu...
NF EN ISO 14644-14:2016 Salles propres et environnements maîtrisés apparentés - Partie 14 : évaluation de l'aptitude à l'emploi des équipments par la détermination de la concentration de particules en suspension dans l'air
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF EN ISO 11125-6:2018 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 6 : détermination des particules étrangères

CEN - European Committee for Standardization, About Test Granularity

EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution

Professional Standard - Electricity, About Test Granularity

DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants

Lithuanian Standards Office , About Test Granularity

LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
LST EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010)
LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
LST EN 12457-4-2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
LST EN 12457-2-2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
LST EN 405-2002+A1-2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
LST EN 13443-2+A1-2007 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

国家市场监督管理总局、中国国家标准化管理委员会, About Test Granularity

GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density

NZ-SNZ, About Test Granularity

AS/NZS 2341.22:1996 Methods of Testing Bitumen and Related Roadmaking Products Method 22: Determination of Particle Charge
NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils

RU-GOST R, About Test Granularity

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST R 59667-2021 Atmospheric air quality. Methods for determining the fractional composition of dust by optical method. Calculation of suspended particle concentrations PM2.5, PM10 in atmospheric air based on fractional composition

Group Standards of the People's Republic of China, About Test Granularity

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/SPMA T/SPMA002-2023 Testing method for the soothing function of cosmetics in vitro mast cell based assay of degranulation Inhibition and histamine release

ES-UNE, About Test Granularity

UNE-EN ISO 17892-3:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015)
UNE-EN ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) (Endorsed by AENOR in February of 2011.)
UNE-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 29463-3:2019 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011)
UNE-EN ISO 29463-5:2022 High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements (ISO 29463-5:2022)
UNE-EN 12457-4:2003 ERRATUM:2006 Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).
UNE-EN ISO 29463-4:2019 High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-Scan method (ISO 29463-4:2011)
UNE-EN ISO 11125-5:2019 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)

PH-BPS, About Test Granularity

PNS ISO 14644-12:2021 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density

VN-TCVN, About Test Granularity

TCVN 6530-12-2007 Refractories.Method of test.Part 12: Determination of bulk density of granular materials

KR-KS, About Test Granularity

KS I ISO 14644-12-2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS B ISO 29463-1-2021 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking

YU-JUS, About Test Granularity

JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
JUS B.G8.156-1987 Methods of physical testing of iron ores. Determination of bu/k density for ores ofmaximum particle size larger than 40 mm

Professional Standard - Automobile, About Test Granularity

QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
QC/T 29105.4-1992 Test method for solid pollution degree of hydraulic oil in hydraulic system of special purpose vehicles Microscopic particle counting method

Professional Standard - Machinery, About Test Granularity

JB/T 9591.3-2015 Gas turbine.Cleanliness verifing for oil system.Measuring particulate contaminant in oil by microscopic counting method
JB/T 9591.3-1999 Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method

未注明发布机构, About Test Granularity

BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method

US-FCR, About Test Granularity

FCR COE CRD-C 171-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINING PERCENTAGE OF CRUSHED PARTICLES IN AGGREGATE
FCR COE CRD-C 653-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE-DENSITY RELATION OF SOILS

American National Standards Institute （ANSI), About Test Granularity

ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), About Test Granularity

ASHRAE 52.1-1992 Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter
ASHRAE 52.1 INT 1-2007 Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter

Underwriters Laboratories (UL), About Test Granularity

UL 2904-2019 UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers (First Edition)