ZH
RU
ES
Air Curtain Gas Intensity
Air Curtain Gas Intensity, Total:498 items.
In the international standard classification, Air Curtain Gas Intensity involves: Construction materials, Natural gas, Tyres, Road vehicle systems, Products of the textile industry, Rubber, Fuels, Air quality, Geology. Meteorology. Hydrology, Electrical engineering in general, Burners. Boilers, Iron and steel products, Electromechanical components for electronic and telecommunications equipment, Non-destructive testing, Electricity. Magnetism. Electrical and magnetic measurements, Protection against fire, Elements of buildings, Insulating materials, Components for electrical equipment, Sacks. Bags, Farming and forestry, Aircraft and space vehicles in general, Furniture, Springs, Chipless working equipment, Protection of and in buildings, Equipment for petroleum and natural gas industries, Electronic tubes, Environmental testing, Electrical accessories, Test conditions and procedures in general, Electric traction equipment, Cellular materials, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Aerospace electric equipment and systems, Optoelectronics. Laser equipment, Insulation, Products of non-ferrous metals, Welding, brazing and soldering, Semiconductor devices, Vocabularies, Installations in buildings, Continuous handling equipment, Domestic, commercial and industrial heating appliances, Earthworks. Excavations. Foundation construction. Underground works, Civil engineering in general, Fluid storage devices, Small craft, Glass, Bottles. Pots. Jars, Lamps and related equipment, Adhesives, Construction industry, Components and accessories for telecommunications equipment, Ceramics, Products of the chemical industry, Protection against electric shock, Rubber and plastics products, Explosion protection, Electrical equipment for working in special conditions, Acoustics and acoustic measurements, Occupational safety. Industrial hygiene, On-board equipment and instruments, Nuclear energy engineering, Plastics, Refrigerating technology, Surface treatment and coating, Protection against dangerous goods, Linear and angular measurements, Quality, Optical equipment, Medical equipment, Thermodynamics and temperature measurements, Pipeline components and pipelines, Aerospace engines and propulsion systems, Gas and steam turbines. Steam engines, Insulating fluids, Road engineering, Aerospace fluid systems and components, Packaging materials and accessories, Electrical wires and cables.
Group Standards of the People's Republic of China, Air Curtain Gas Intensity
- T/ZZB 2868-2022 Air curtain type smoke isolation gas stove
- T/CBMF 118.1-2021 Methods for odour assessment of building materials Part 1: odour intensity and odor dissipating time
- T/STIC 110076-2022 High-strength air-filled bags for unitized implement filling
- T/ZZB 1037-2019 High strength copper-magnesium alloy stranded conductors for electric railway
- T/ZZB 0450-2018 High strength brass alloy rod, wire and thick-wall tube for tire valve
- T/CECS 916-2021 Technical specification for testing the compressive strength of autoclaved aerated concrete by penetration method
- T/CAQI 262-2022 Technical guidelines for air cleanliness control of gas turbines
CZ-CSN, Air Curtain Gas Intensity
German Institute for Standardization, Air Curtain Gas Intensity
- DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
- DIN EN 1351:1997-02 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
- DIN EN 679:2005-09 Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
- DIN IEC 60370:1994 Test procedure for thermal endurance of insulating varnishes - Electric strength method (IEC 60370:1971); German version HD 570 S1:1990
- DIN EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
- DIN EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; German version EN 13125:2001
- DIN EN 15706:2009-08 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts; German version EN 15706:2009
- DIN 50011-13:1991 Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature
- DIN EN ISO 9809-1:2020 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1100 MPa (ISO 9809-1:2019)
- DIN 30683-2:1984-12 Gas appliances; forced air gasburners with ventilation in bakeries
- DIN ISO 8756:1996 Air quality - Handling of temperature, pressure and humidity data (ISO 8756:1994)
- DIN EN ISO 9809-2:2020 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1100 MPa (ISO 9809-2:2019)
- DIN EN 16976:2023-06 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German and English version prEN 16976:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN CEN/TS 16976 (2016-11).
- DIN CEN/TS 16976:2016-11*DIN SPEC 33974:2016-11 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German version CEN/TS 16976:2016
- DIN EN ISO 18276:2017-07 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017); German version EN ISO 18276:2017
- DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
- DIN EN 60749-22:2003 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength (IEC 60749-22:200 + Corr. 1:2003); German version EN 60749-22:2003
- DIN EN 1507:2006 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; English version of DIN EN 1507:2006-07
- DIN EN 60749-22:2003-12 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength (IEC 60749-22:200 + Corr. 1:2003); German version EN 60749-22:2003 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standard unti...
- DIN EN 1353:1997 Determination of moisture content of autoclaved aerated concrete; German version EN 1353:1996
- DIN EN ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2005); English version of DIN EN ISO 18276:2006-09
- DIN 50012-2:1986 Climates and their technical application; methods of measuring humidity; psychrometers
- DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
- DIN EN ISO 8973:2000 Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999
- DIN EN ISO 8973:2020-07 Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997 + Amd 1:2020); German version EN ISO 8973:1999 + A1:2020
- DIN EN 60749-19:2011-01 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength (IEC 60749-19:2003 + A1:2010); German version EN 60749-19:2003 + A1:2010 / Note: DIN EN 60749-19 (2003-10) remains valid alongside this standard until 2013-09-01.
- DIN EN ISO 18276:2023-07 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO/DIS 18276:2023); German and English version prEN ISO 18276:2023 / Note: Date of issue 2023-05-26*Intend...
ES-AENOR, Air Curtain Gas Intensity
International Organization for Standardization (ISO), Air Curtain Gas Intensity
- ISO/CD TS 18222:2023 Natural gas — Olfactory method for the evaluation of odour intensity
- ISO/DTS 18222:2004 Natural gas — Olfactory method for the evaluation of odour intensity
- ISO/TS 18222:2023 Natural gas — Olfactory method for the evaluation of odour intensity
- ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
- ISO 22967:2010 Forced draught gas burners
- ISO 5925-1:2007/Amd 1:2015 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests; Amendment 1
- ISO 5221:1984 Air distribution and air diffusion; Rules to methods of measuring air flow rate in an air handling duct
- ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification
- ISO 18276:2005 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification
- ISO/DIS 18276 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
American Society for Testing and Materials (ASTM), Air Curtain Gas Intensity
- ASTM D2692/D2692M-10 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM D6273-98 Standard Test Methods for Natural Gas Odor Intensity
- ASTM D6273-98(2003) Standard Test Methods for Natural Gas Odor Intensity
- ASTM D6273-08 Standard Test Methods for Natural Gas Odor Intensity
- ASTM D6273-14 Standard Test Methods for Natural Gas Odor Intensity
- ASTM D6273-20 Standard Test Method for Natural Gas Odor Intensity
- ASTM D2692-98 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM D2692/D2692M-15 Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM D2692-04 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM D2692-07 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM D2692/D2692M-10(2014) Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
- ASTM E544-18 Standard Practice for Referencing Suprathreshold Odor Intensity
- ASTM D5822-03(2007) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-03 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-13(2019) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-13 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-02 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
- ASTM A871/A871M-03(2007) Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM D952-10 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM A871/A871M-12 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM D952-15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM A871/A871M-14 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM D7571-20 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
- ASTM A871/A871M-01 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM A871/A871M-00a Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM D7571-21 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
- ASTM D7571-18 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
- ASTM A871/A871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM A871/A871M-20 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM D4974-01 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM D4974/D4974M-22 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM D4974-04(2016) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM E1593-94(1999) Standard Practice for Assessing the Efficacy of Air Freshener Products in Reducing Sensorily Perceived Indoor Air Malodor Intensity
European Committee for Standardization (CEN), Air Curtain Gas Intensity
- EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
- EN 679:1993 Determination of the Compressive Strength of Autoclaved Aerated Concrete
- prEN 679-1992 Determination of the compressive strength of autoclaved aerated concrete
- EN 1507:2006 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
- EN ISO 7623:2015 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2015)
- prEN 676-1992 Forced draught burners for gaseous fuels
- EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
- PD CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
- EN ISO 8973:1999 Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997)
- EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gasshielded and non-gas-shielded metal arc welding of high strength steels - Classification
- prEN 778-1992 Requirements for domestic gas-fired forced convection air heaters for space heating
国家市场监督管理总局、中国国家标准化管理委员会, Air Curtain Gas Intensity
- GB/T 38795-2020 Performance requirements of side airbag and curtain airbag module
- GB/T 40916-2021 High strength polyurethane foam for storage and transport of liquefied gas
- GB/T 20914.3-2019 Stamping dies—Gas springs—Part 3: Gas spring with increased spring force and compact built height
- GB/T 20914.4-2019 Stamping dies—Gas springs—Part 4: Gas spring with increased spring force and same built height
- GB/T 4937.22-2018 Semiconductor devices—Mechanical and climatic test methods—Part 22: Bond strength
- GB/T 4937.19-2018 Semiconductor devices—Mechanical and climatic test methods—Part 19: Die shear strength
VN-TCVN, Air Curtain Gas Intensity
- TCVN 7647-2010 Rubber, vulcanized.Determination of adhesion to wire cord
- TCVN 6752-2000 Air quality.Handling of temperature, pressure and humidity data
Korean Agency for Technology and Standards (KATS), Air Curtain Gas Intensity
- KS K 0410-2022 Test method for breaking strength and elongation of cords
- KS M ISO 4647-2014(2019) Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
- KS C IEC 60370:2002 Test procedure for thermal endurance of insulating varnishes－ Electric strength method
- KS W 0623-2002(2012) AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
- KS W 0623-1987 AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
- KS W 0623-1982 AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
- KS F 2903-2008 Test methods for air erosion of sprayed fire resistive material applied to structural members
- KS B ISO 22967-2012(2017) Forced draught gas burners
- KS B ISO 22967-2012(2022) Forced draught gas burners
- KS M ISO 10123:2004 Adhesives&##1051365;Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
- KS M ISO 10123:2015 Adhesives
- KS W 0623-2002 Airplane strength and rigidity, flutter, divergence,and other aeroelastic instabilities
- KS C IEC 60243-1:2018 Electrical strength of insulating materials — Test methods — Part 1: Tests at power frequencies
- KS B ISO 18276:2006 Welding consumables-Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels-Classification
- KS B ISO 18276:2016 Welding consumables－Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels－Classification
- KS I ISO 5221:2007 Air distribution and air diffusion-Rules to methods of measuring air flow rate in an air handling duct
- KS C IEC 60749-22:2004 Semiconductor devices-Mechanical and climatic test methods-Part 22:Bond strength
- KS C IEC 60749-22:2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength
- KS B ISO 22967:2012 Forced draught gas burners
- KS F 2459-2002 Testing methods for density, water content,absorption and compressive strength of cellular concrete
- KS B ISO 18276:2019 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
- KS P 6124-2006 Oxygen analyzers for medical use
- KS B ISO 9809-1:2022 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MP
- KS M ISO 8973:2003 Liquefied petroleum gases－Calculation method for density and vapour pressure
- KS C IEC 60749-19:2020 Semiconductor devices — Mechanical and climatic test methods — Part 19: Die shear strength
British Standards Institution (BSI), Air Curtain Gas Intensity
- BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- BS ISO 22967:2010 Forced draught gas burners
- BS 903-C4:1983 Physical testing of rubber. Determination of electric strength
- BS 7831:1995 Test procedure for thermal endurance of insulating varnishes - Electric strength method
- BS EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
- BS EN 2591-709:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Tensile strength of couplers
- BS EN 60749-22:2003 Semiconductor devices - Mechanical and climatic test methods - Bond strength
- BS EN 60749-19:2003 Semiconductor devices - Mechanical and climatic test methods - Die shear strength
- BS EN 60749-19:2003+A1:2010 Semiconductor devices. Mechanical and climatic test methods. Die shear strength
- BS EN 60243-1:2013 Electric strength of insulating materials. Test methods. Tests at power frequencies
- BS EN 50289-1-3:2001 Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength
- BS EN ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification
- BS EN 2591-417:2001 Elements of electrical and optical connection - Test methods - Tensile strength (crimped connection)
- BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
- BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
- BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
- BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
- BS EN 2591-420:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
- BS EN 1507:2006 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
- BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
- 23/30464870 DC BS EN 16976. Ambient air. Determination of the particle number concentration of atmospheric aerosol
- BS EN 60243-2:2014 Electric strength of insulating materials. Test methods. Additional requirements for tests using direct voltage
- BS EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Quenched and tempered steel cylinders with tensile strength less than 1100 MPa
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Air Curtain Gas Intensity
- GB/T 16586-2014 Rubber, vulcanized.Determination of adhesion to wire cord
- GB/T 16586-1996 Rubber,vulcanized--Determination of adhesion to wire cord
- GB/T 2942-1991 Rubber,vulcanized--Determination of static adhesion to textile cord ch-pull test
- GB/T 9506.11-1988 Test method for weld strength of getter support
- GB/T 2942-2009 Rubber,vulcanized.Determination of static adhension to textile cord.H-pull test
- GB/T 27749-2011 Test procedure for thermal endurance of insulating varnishes.Electric strength method
- GB/T 5099.1-2017(英文版) "Seamless steel gas cylinders—Part 1:Quenched and tempered steel
cylinders with tensile strength less than 1 100 MPa"
- GB/T 3789.17-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of electrical intensity
- GB/T 1408.1-1999 Methods of test for electric strength of solid insulating materials Tests at power frequencies
- GB/T 1408.1-2006 Electrical strength of insulating materials-Test methods-Part 1:Tests at power frequencies
- GB/T 1408.1-2016 Insulating materials.Test methods for electric strength.Part 1:Test at power frequencies
- GB/T 21859-2008 Method of test for ignition temperature of gases and vapours
- GB/T 7661-1987 Bubble classes for optical elements
- GB/T 7661-2009 Bubble classes of optical elements
RU-GOST R, Air Curtain Gas Intensity
- GOST 14863-1969 Rubber. Method for determination of rubber to cord adhesion
- GOST ISO 5603-2013 Rubber vulcanized. Determination of adhesion to wire cord
- GOST 22387.5-2014 Gas for domestic and public use. Methods for determination of odor intensity
- GOST 22387.5-1977 Gas for domestic and public utilities. Methods for determination of odour intensity
- GOST 20690-1975 Electrical equipment for a.c. voltage 750 kV. Requirements for electric strength of insulation
- GOST 22091.15-1986 X-ray devices. The method of electric strenght test
- GOST 1516.3-1996 Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
- GOST 1516.2-1987 Electrical equipment and installations for a. c. voltages 3 kV and higher. General methods of dielectric tests
- GOST EN 15706-2012 Hardware for furniture. Strength and durability of slide fittings for sliding doors and roll fronts
- GOST 21011.4-1977 High-voltage kenotrons. Test methods of electric strength
- GOST R 52857.4-2007 Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
- GOST 16918-1971 Curtain fabric and net fabric. Method of definition tensile strength and breaking extension
- GOST 25763-1983 Gas-discharge sources of high-intensity optical radiation for laser pumping. Basic dimensions
- GOST 1516.1-1976 Electrical equipment for a.c. voltages from 3 to 500 kV. Requirements to electrical strength of insulation
- GOST 17443-1980 Rubber. Method for determination fatique life bond of rubber to cord under repeated extention-compression
- GOST 16803-1978 Discharge pulsed sources of high-intensity optical radiation. Terms and definitions
- GOST 29007-1991 Rubber. Method for defermination of adhesion elements in the chamber of pneumatic tyres
- GOST 21195-1984 Spectral high-intensity gas-discharge sources of optical radiation. General specifications
- GOST 25822-1983 Vessels and apparatuses. Air cooled heat exchangers. Norms and methods of strength calculation
- GOST 22466.1-1988 Gaseous discharge sources of high-intensity optical radiation. Method for measiring luminous parameters
- GOST 21106.3-1976 Oscillator tubes with anode dissipation above 25 W. Method of electric strength test
- GOST 12.1.038-1982 Occupational safety standards system. Electric safety. Maximum permissible levels of pick-up voltages and currents
- GOST 24606.1-1981 Switches, hardware and electric connectors. Methods for control of insulation dielectric strength
- GOST 22466.4-1982 Gaseons discharge continuous sources of high-intensity optical radiation. Methods for measuring electrical parameters
- GOST 25926-1990 Radionuclide ionising radiation sealed sources. Purability classes and test methods. Norms of degrees of rigidity under climatic and mechanical influences
- GOST 21106.4-1976 Modulator flash tubes with anode dissipation above 25 W. Method of electric strength test
- GOST 23449-1979 Onconfines discharge impulsive sources of high-intensity optical radiation. Construction and basic dimensions
- GOST R 50555-1993 Industrial purity. Classes of gases purity
GM Europe, Air Curtain Gas Intensity
HU-MSZT, Air Curtain Gas Intensity
IPC - Association Connecting Electronics Industries, Air Curtain Gas Intensity
Association of German Mechanical Engineers, Air Curtain Gas Intensity
- VDI 3882 Blatt 1-1992 Olfactometry; determination of odour intensity
- VDI 3940 Blatt 3-2010 Measurement of odour impact by field inspection - Determination of odour intensity and hedonic odour tone
- VDI 3003 Blatt 3-2013 Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force and low height
- VDI 3940 Blatt 5-2013 Measurement of odour impact by field inspection - Determination of odour intensity and hedonic odour tone - Instructions and examples of use
- VDI 3786 Blatt 4-2013 Environmental meteorology - Meteorological measurements - Air humidity
- VDI 3786 Blatt 6-1983 Meteorological measurements of air pollution; turbidity of ground-level atmosphere standard visibility
- VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers
- VDI 3786 Blatt 4-1985 Meteorological measurements concerning questions of air pollution; air humidity
- VDI 3940 Blatt 3 Berichtigung 1-2011 Measurement of odour impact by field inspection - Determination of odour intensity and hedonic odour tone - Corrigendum concerning guideline VDI 3940 Part 3:2010-01
- VDI 3003 Blatt 4-2013 Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force
Xinjiang Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
NL-NEN, Air Curtain Gas Intensity
- NEN 3660-1988 Window frames - Air permeability, rigidity and strength Methods of test
- NEN-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete
- NEN 1876-1993 Air coolers. Determination of the performance of frosted air coolers with forced air circulation
- NEN 2795-1985 Air quality - Ambient air and indoor air Determination of the concentration of methanal (formaldehyde) - Pararosanilin photometric method
AT-ON, Air Curtain Gas Intensity
SE-SIS, Air Curtain Gas Intensity
IN-BIS, Air Curtain Gas Intensity
Jilin Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
American National Standards Institute （ANSI), Air Curtain Gas Intensity
National Sanitation Foundation (NSF), Air Curtain Gas Intensity
- NSF 37-2020 Air Curtains for Entranceways in Food and Food Service Establishments
- NSF 37-2007 Air Curtains for Entranceways in Food and Food Service Establishments Printed 04/18/07
- NSF 37-2002 Air Curtains for Entranceways in Food and Food Service Establishments Printed 3/22/02
Danish Standards Foundation, Air Curtain Gas Intensity
- DS 433.3:1989 Aerated lightweight concrete components. Compressive strength
- DS 433.4:1989 Aerated light weight concrete components. Bending strength
- DS 1122.1:1983 Ventilating sheet ducts. Strength and air tightness. Testing
- DS 1122.2:1983 Ventilating sheet ducts. Strength and air tightness. Requirements
- DS/EN 679:1994 Determination of the compressive strength of autoclaved aerated concrete
- DS/EN 1351:1998 Determination of flexural strength of autoclaved aerated concrete
- DS/EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
- DS/EN 15706:2009 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts
- DS/EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
- DS/EN ISO 18276:2006 Welding consumables – Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification
- DS/EN ISO 9809-2:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
- DS/ISO 131:1992 Acoustics. Expression of physical and subjective magnitudes of sound or noise in air
- DS/EN 60243-1:1998 Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies
- DS/EN 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
- DS/EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
- DS/EN 60749-22+Corr.1:2004 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strenght
- DS/EN 2591-709:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
- DS/EN 13725/AC:2006 Air quality – Determination of odour concentration by dynamic olfactometry
- DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
- DS/EN 60749-19/A1:2010 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength
- DS/EN 60749-19:2003 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Air Curtain Gas Intensity
- GB/T 36026-2018 High-strength corrosion-resistant alloy bars for oil and gas engineering
- GB/T 35226-2017 Specifications for surface meteorological observation—Air temperature and humidity
- GB/T 35223-2017 Specifications for surface meteorological observation—Meteorological visibility
Association Francaise de Normalisation, Air Curtain Gas Intensity
- NF X41-044:1985 Rubans adhésifs à usage électrique - Rigidité diélectrique - Essai de courte durée.
- NF P19-104:1994 Determination of the compressive strength of autoclaved aerated concrete.
- NF C26-213:1989 Mechanical endurance functional tests for electrical insulation systems
- NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
- NF P19-104*NF EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
- NF EN 1351:1997 Détermination de la résistance à la traction par flexion du béton cellulaire autoclavé
- FD E29-760:2014 Gaz cylinders - Fatigue srength testing under repeated pressurizing for liquefied or dissolved compressed gases
- NF EN ISO 13938-2:2019 Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 2 : méthode pneumatique pour la détermination de la résistance et de la déformation à l'éclatement
- NF H35-078:1977 Bottling industry. Glass bottles. Containers for carbonated beverages. Strength requirements.
- NF A49-901-1*NF EN ISO 9809-1:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1 : quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
- NF A49-901-2*NF EN ISO 9809-2:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2 : quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
- NF H35-078:2007 Bottling industry - Glass bottles - Containers for carbonated beverages - Mechanical strength requirements.
- XP X43-075*XP CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
- XP CEN/TS 16976:2016 Air ambiant - Détermination de la concentration en nombre de particules de l'aérosol atmosphérique
- NF E63-131-4:2014 Tools for pressing - Gas Springs - Part 4 : gas springs with increased spring force and same build height
- NF E63-131-3:2014 Tools for pressing - Gas springs - Part 3 : gas spring with increased spring force and compact build height
- NF E63-131-4*NF ISO 11901-4:2021 Tools for pressing - Gas springs - Part 4 : gas springs with increased spring force and same built height
- NF E63-131-3*NF ISO 11901-3:2021 Tools for pressing - Gas springs - Part 3 : gas spring with increased spring force and compact built height
- NF A81-352*NF EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification
- NF X15-119:1999 Mesure de l'humidité de l'air - Générateurs d'air humide à solutions salines pour l'étalonnage des hygromètres.
- NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
- NF C96-022-22*NF EN 60749-22:2003 Semiconductor devices - Mechanical and climatic test methods - Part 22 : bond strength.
- NF C26-226*NF EN 60243-1:2013 Electrical strength of insulating materials - Test methods - Part 1 : tests at power frequencies
- XP T47-766:2013 End of life tyres (ELT) - Characterization of granulates from granulation processes - Evaluation of the odour intensity
- NF A81-352:2006 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification.
- NF E51-716*NF EN 1507:2006 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage.
- NF EN ISO 16834:2012 Produits consommables pour le soudage - Fils-électrodes, fils, baguettes et dépôts pour le soudage à l'arc sous flux gazeux des aciers à haute résistance - Classification
- NF S66-260:2005 Determination of the auto ignition temperature of gases and vapours.
- NF X15-110:1994 Mesure de l'humidité de l'air - Paramètres hygrométriques
- NF X43-101:1986 Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.
- NF L54-002-165*NF EN 2591-709:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709 : electrical elements - Tensile strength of couplers.
- NF C96-022-19*NF EN 60749-19:2003 Semiconductor devices - Mechanical and climatic test methods - Part 19 : die shear strength
- NF H00-044:1990 Packaging. Sheet materials. Determination of water vapour transmission rate through a sheet by a probe with surface strength.
- FD ISO/TR 19478-1:2015 Paramètres de fumage ISO et santé canada intense - Partie 1 : résultats d'une étude internationale de fumage sur machine
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Air Curtain Gas Intensity
AENOR, Air Curtain Gas Intensity
- UNE-EN 679:2006 Determination of the compressive strength of autoclaved aerated concrete
- UNE-EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- UNE 21570:1993 TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING VARNISHES. ELECTRIC STRENGTH METHOD.
- UNE-EN 15706:2009 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts
- UNE-EN 60749-22:2004 Semiconductor devices - Mechanical and climatic test methods -- Part 22: Bond strength
- UNE-EN 13725:2004 Air quality - Determination of odour concentration by dynamic olfactometry
- UNE-EN 60749-19:2003/A1:2011 Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength
- UNE-EN 60749-19:2003 Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength
- UNE-EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
NO-SN, Air Curtain Gas Intensity
- NS-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete
Lithuanian Standards Office , Air Curtain Gas Intensity
- LST EN 1351-2000 Determination of flexural strength of autoclaved aerated concrete
- LST EN 679-2005 Determination of the compressive strength of autoclaved aerated concrete
- LST EN 15706-2009 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts
- LST EN 14522-2005 Determination of the auto ignition temperature of gases and vapours
- LST EN 2591-709-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
- LST EN 13725-2004 Air quality - Determination of odour concentration by dynamic olfactometry
- LST EN 13725-2004/AC-2006 Air quality - Determination of odour concentration by dynamic olfactometry
- LST EN ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2005)
Military Standard of the People's Republic of China-General Armament Department, Air Curtain Gas Intensity
- GJB 1172.15-1991 Military equipment climate extreme aerial precipitation intensity
- GJB 1172.5-1991 Military equipment climate extreme ground precipitation intensity
- GJB 540.8-1988 Airborne Missile Strength and Stiffness Specification Aeroelastic Instabilities
- GJB 67.7-1985 Military Aircraft Strength and Stiffness Specification Aeroelastic Instabilities
- GJB 5435.8-2005 Specification for unmanned aerial vehicles strength and rigidity Part 8: Aeroelastic instabilities
- GJB 67.7A-2008 Military airplane structural strength specigcation.Part 7: Aeroelasticity
- GJB 360.21-1987 Test methods for electronic and electrical components Terminal strength test
- GJB 816-1990 Determination of brittleness temperature of weather balloons
- GJB 720.5-1989 Military Helicopter Strength and Stiffness Specification Vibration, Mechanical and Aeroelastic Instabilities
- GJB 1172.13-1991 Military equipment climate extremes air humidity
- GJB 1172.17-1991 Military EquipmentClimate ExtremesAerial Air Density
- GJB 1172.10-1991 Military equipment climate extremes ground air density
- GJB 1172.3-1991 Military equipment climate extremes ground air humidity
International Electrotechnical Commission (IEC), Air Curtain Gas Intensity
- IEC 60370:1971 Test procedure for thermal endurance of insulating varnishes - Electric strength method
- IEC 60749-22:2002/COR1:2003 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength
- IEC 60749-22:2002 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength
- IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
- IEC 60243-1:1998 Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies
- IEC 60749-19:2010 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength test
- IEC 112/88/DTS:2007 IEC/TS 61251, Ed. 2.0: Electrical insulating materials and systems - A.C. voltage endurance evaluation - Introduction
- IEC 60749-19:2003+AMD1:2010 CSV Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength
PL-PKN, Air Curtain Gas Intensity
- PN E04410-20-1986 Electroinsulating varnishes Test methods Testing of electric strength
- PN E04404-1986 Solid insulation materials Methods of test for electric strength at power frequencies
- PN E04453-1954 Magnetic sheets used in electrical engineering -- Determination of relativity of induction from magnetic field intensity by absolute method using ring test specimen
- PN E04070-04-1986 Power transformers Test methods Test of tightness and strength of tank
- PN Z04037-10-1987 Air purity protection Tests for chlorine Determination of chlorine content in the ambient air (imision) by spectrophotometric method with methyl orange
- PN Z04037 Arkusz 02-1973 Air purity protection Test for chlorine etermination of chlorine in work tation by nephelometric method
- PN C04756-1985 Gas fuels Determination of dewpoint temperatur? for natural gas
Henan Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
- DB41/T 1976-2020 Evaluation Method of Meteorological Intensity in Regional Rainstorm Process
Professional Standard - Petroleum, Air Curtain Gas Intensity
- SY/T 6477-2017 Evaluation Method for Residual Strength of Oil and Gas Pipelines Containing Defects
- SY/T 5276-2000 Determination of flexural strength, compressive strength and gas permeability of chemical sand control artificial core
- SY/T 6477-2014 Evaluation methods of remaining strength for oil & gas transmission pipeline with flaws
PT-IPQ, Air Curtain Gas Intensity
Illuminating Engineering Society of North America, Air Curtain Gas Intensity
- IESNA LM-51-2000 Approved Method for the Electrical and Photometric Measurements of High Intensity Discharge Lamps
- IESNA LM-31-1995 Photometric Testing of Roadway Luminaires Using Incandescent Filament and High Intensity Discharge Lamps
未注明发布机构, Air Curtain Gas Intensity
- DIN EN 1464:1995 Adhesives – Determination of the formwork resistance of high-strength adhesives LUN roller shutter test
- GJB 720.5A-2012 Strength Specifications for Military Helicopters Part 5: Vibration, Aeromechanical and Aeroelastic Stability
- SAE AS8009C-2016 (R) Pressure Altimeter Systems
- BS 692:1990(2007) Specification for Meteorological thermometers
Canadian Standards Association (CSA), Air Curtain Gas Intensity
- CSA 2.35B-2007-2007 Gas-Fired High-Intensity Infrared Heaters Addenda to the First Edition
- CSA 2.35A-2002-2002 Gas-Fired High-Intensity Infrared Heaters Addenda to First Edition
- CSA C863-04-2004 Energy efficiency of high-intensity discharge (HID) and low-pressure sodium (LPS) lamp ballasts
- CSA 2.35-2001-2001 Gas-Fired High-Intensity Infrared Heaters First Edition [Superseded: CSA 2.16-M81-CAN/CSA]
- CSA/AM CSA/ANSI Z83.20-2001 Gas-Fired Low-Intensity Infrared Heaters First Edition; Addenda A:April 2003; Addenda B: 2004; CSA 2.34-2001
YU-JUS, Air Curtain Gas Intensity
- JUS N.S5.006-1982 Dielectric strength tests ofmedical electrical eguipment and accessories
Taiwan Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
- CNS 3628-1990 Basic Environmental Testing Procedures Part 2 : Tests, Test U : Robustness of Terminations and Integral Mounting Devices
- CNS 1374-1961 Argon, High Purity
- CNS 13814-1997 Wire-Reinforced Rubber Hoses for Gaseous Fuels
- CNS 8967-2001 MAG welding solid wires for mild steel and high strength steel
RO-ASRO, Air Curtain Gas Intensity
Canadian Standards Association/American National Standards , Air Curtain Gas Intensity
CENELEC - European Committee for Electrotechnical Standardization, Air Curtain Gas Intensity
- PREN 50359-1-1-2000 Advanced Technical Ceramics - Part 1-1: Electrical Properties - Methods of Test for Short Term Electric Strength
- EN 60243-1:1998 Electrical Strength of Insulating Materials - Test Methods Part 1: Tests at Power Frequencies
VE-FONDONORMA, Air Curtain Gas Intensity
GOSTR, Air Curtain Gas Intensity
- GOST 34484-2018 Stationary steam turbine. Norms of calculation for strength of cylinder and valve casings
Professional Standard - Agriculture, Air Curtain Gas Intensity
- GB 1408-1989 Test method for power frequency electric strength of solid insulating materials
中国气象局, Air Curtain Gas Intensity
- QX/T 416-2018 Severe convective weather level
- QX/T 599-2021 Meteorological data elements altitude and pressure
- QX/T 519-2019 Technological methods for tropical cyclone intensity determination by geostationary meteorological satellites
- QX/T 600-2021 Meteorological data element temperature
Standard Association of Australia （SAA）, Air Curtain Gas Intensity
- AS/NZS ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high-strength steels - Classification (ISO 18276:2005, MOD)
- AS/NZS ISO 18276:2022 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
- AS 2568:1991 Medical gases - Purity of compressed medical breathing air
GM North America, Air Curtain Gas Intensity
- GM GM2901M-2000 Spring Materials - Oil Tempered High Tensile Steel Wire, Valve Spring Quality
AWS - American Welding Society, Air Curtain Gas Intensity
- A5.26-1978 SPECIFICATION FOR CONSUMABLES USED FOR ELECTROGAS WELDING OF CARBON AND HIGH STRENGTH LOW ALLOY STEELS
ECIA - Electronic Components Industry Association, Air Curtain Gas Intensity
- EIA-364-79-1998 TP-79 INSERT BOND STRENGTH TEST PROCEDURE FOR ELECTRICAL CONNECTORS
- EIA-364-98-1997 TP-98 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors
国家能源局, Air Curtain Gas Intensity
- SY/T 7456-2019 Reliability evaluation method of structure and strength of oil and gas well casing strings
Japanese Industrial Standards Committee (JISC), Air Curtain Gas Intensity
Compressed Gas Association (U.S.), Air Curtain Gas Intensity
- CGA P-6-2012 Standard density data, atmospheric gases and hydrogen
BE-NBN, Air Curtain Gas Intensity
Electronic Components, Assemblies and Materials Association, Air Curtain Gas Intensity
- ECA EIA-364-98-1997 TP-98 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors
- ECA 364-98-1997 TP-98 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors
ESDU - Engineering Sciences Data Unit, Air Curtain Gas Intensity
Hebei Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
- DB1310/T 297-2023 Test method for compressive strength of autoclaved aerated concrete
- DB13/T 5359-2021 Automatic weather station sensor replacement specification air pressure, air temperature and humidity, wind direction and speed, ground temperature
SAE - SAE International, Air Curtain Gas Intensity
- SAE AIR6284-2015 Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants
- SAE AS22759/82-2000 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Light Weight@ Nickel Coated@ High Strength or Ultra High Strength Copper Alloy@ 260 Degrees Celsius@ 600 Volts
- SAE AS428-1996 Exhaust Gas Temperature Instruments
- SAE AS22759/82A-2004 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Light Weight@ Nickel Coated@ High Strength or Ultra High Strength Copper Alloy@ 260°C@ 600 Volts
- SAE ARP210A-2014 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
- SAE AS81044/13-2000 Wire@ Electric@ Crosslinked Polyalkene Insulated@ Silver-Coated High Strength Copper Alloy@ Light Weight@ 600-Volt@ 150 Degrees C
- SAE AS22759/90A-2004 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Normal Weight@ Nickel Coated@ High Strength or Ultra High Strength Copper Alloy@ 260°C@ 600 Volts
- SAE AS22759/190-2010 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED@ SMOOTH SURFACE@ NORMAL WEIGHT@ NICKELCOATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY@ 260 DEGREE C@ 600 VOLTS
Society of Automotive Engineers (SAE), Air Curtain Gas Intensity
- SAE ARD50102-2002 Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants
- SAE AS428-1966 Exhaust Gas Temperature Instruments
- SAE AS428-2008 Exhaust Gas Temperature Instruments
- SAE ARP210-2011 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
- SAE AS210-2018 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
- SAE AMS2449-2004(R2010) Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels
- SAE AMS2448-2004 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen/Fuel Process
- SAE AS8009B-2005 (R) Pressure Altimeter Systems
- SAE AS8009A-1991 Pressure Altimeter Systems
- SAE ARP1179C-1997 Aircraft Gas Turbine Engine Exhaust Smoke Measurement
- SAE AS38390-1999 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 160 Degrees F, Covered Pneumatic
National Aeronautics and Space Administration (NASA), Air Curtain Gas Intensity
- NASA NACA-RM-E50H23-1950 Correlation of forced-convection heat-transfer data for air flowing in smooth platinum tube with long-approach entrance at high surface and inlet-air temperatures
Professional Standard - Aviation, Air Curtain Gas Intensity
U.S. Environmental Protection Agency (U.S. EPA), Air Curtain Gas Intensity
GB-REG, Air Curtain Gas Intensity
US-FCR, Air Curtain Gas Intensity
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Air Curtain Gas Intensity
Professional Standard-Ships, Air Curtain Gas Intensity
- CB/T 3700-1995 Reinforced synthetic rubber or reinforced plastics inflatable boats
Professional Standard - Building Materials, Air Curtain Gas Intensity
- JC/T 2285-2014 Test method for isostatic compression strength (microspheres-gas compression) for hollow glass microspheres
- JC/T 854-2008 Glassfiber reinforced cement duct for ventilation
FI-SFS, Air Curtain Gas Intensity
Professional Standard - Light Industry, Air Curtain Gas Intensity
- QB/T 4353-2012 Methods of measuring high trigger pulse voltage for high-intensity discharge lamp
National Metrological Verification Regulations of the People's Republic of China, Air Curtain Gas Intensity
European Committee for Electrotechnical Standardization（CENELEC）, Air Curtain Gas Intensity
- EN 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IECQ - IEC: Quality Assessment System for Electronic Components, Air Curtain Gas Intensity
- PQC 119 ISSUE 1-1993 Electronic Tubes Part 14: Sectional Specification for High-Intensity Gas-Discharge Sources of Optical Radiation
KR-KS, Air Curtain Gas Intensity
- KS C IEC 60243-1-2018 Electrical strength of insulating materials — Test methods — Part 1: Tests at power frequencies
- KS C IEC 60749-22-2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength
- KS B ISO 18276-2019 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
- KS B ISO 9809-1-2022 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MP
- KS C IEC 60749-19-2020 Semiconductor devices — Mechanical and climatic test methods — Part 19: Die shear strength
ES-UNE, Air Curtain Gas Intensity
- UNE-EN 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies (Endorsed by AENOR in October of 2013.)
- UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
- UNE-EN 2591-709:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers. (Endorsed by AENOR in April of 2002.)
U.S. Military Regulations and Norms, Air Curtain Gas Intensity
U.S. Air Force, Air Curtain Gas Intensity
Defense Logistics Agency, Air Curtain Gas Intensity
- DLA DSCC-DWG-04036 REV B-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04035 REV A-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04035 REV B-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04036 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT
- DLA DSCC-DWG-04043 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04044 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLT
- DLA DSCC-DWG-04043 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200癈, 600 VOLT
Heilongjiang Provincial Standard of the People's Republic of China, Air Curtain Gas Intensity
US-COE, Air Curtain Gas Intensity
Indonesia Standards, Air Curtain Gas Intensity
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Air Curtain Gas Intensity
- ASHRAE 33-2000 Method of Testing Forced Circulation Air Cooling and Air Heating Coils
Professional Standard - Automobile, Air Curtain Gas Intensity
- QC/T 748-2006 The bench test methods of valve-valve holder intensify abrasion for automotive engines
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Air Curtain Gas Intensity
International Federation of Trucks and Engines, Air Curtain Gas Intensity
IT-UNI, Air Curtain Gas Intensity
Institute of Electrical and Electronics Engineers (IEEE), Air Curtain Gas Intensity
- IEEE Std C136.15-1997 Roadway Lighting Equipment - High-intensity-discharge and low-pressure sodium lamps in luminaires - Field identification
Professional Standard - Meteorology, Air Curtain Gas Intensity
- QX/T 50-2007 Specincations for surface meteorological observation.Part 6: Measurement of air temperature and humidity