ZH
RU
ES

Equipment working environment Working temperature and humidity

Equipment working environment Working temperature and humidity, Total:73 items.

In the international standard classification, Equipment working environment Working temperature and humidity involves: On-board equipment and instruments, Thermodynamics and temperature measurements, Aircraft and space vehicles in general, Electrical and electronic testing, Environmental testing, Ergonomics, Industrial automation systems, Occupational safety. Industrial hygiene, Protection of and in buildings, Installations in buildings, Construction materials, Insulating fluids, Medical equipment, Insulating materials, Heat recovery. Thermal insulation, Iron and steel products, Electrical equipment for working in special conditions, Telecommunication systems, Fluid storage devices, Aerospace electric equipment and systems.

International Organization for Standardization (ISO), Equipment working environment Working temperature and humidity

ISO 9662:1994 Aircraft equipment; environmental and operating conditions for airborne equipment; humidity, temperature and pressure tests
ISO 18096:2013 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation

Japanese Industrial Standards Committee (JISC), Equipment working environment Working temperature and humidity

JIS W 0814:2002 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests

Indonesia Standards, Equipment working environment Working temperature and humidity

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters

YU-JUS, Equipment working environment Working temperature and humidity

JUS L.N4.201-1984 Operating conditions for industrial-process measurement and control equipment. Temperature, humidity and barometric pressure

Military Standard of the People's Republic of China-General Armament Department, Equipment working environment Working temperature and humidity

GJB 282.1-1987 Armored Vehicle Environmental Conditions Operating Ambient Temperature
GJB 898-1990 General medical requirements for work cabin (room) temperature environment
GJB 898A-2004 General medical requirements and evaluation of temperature environment of work cabin (room)

未注明发布机构, Equipment working environment Working temperature and humidity

GJB 282.4-1995 Environmental conditions for armored vehicles Operating and storage ambient humidity

Korean Agency for Technology and Standards (KATS), Equipment working environment Working temperature and humidity

KS W ISO 9662:2018 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS W ISO 9662:2002 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS A ISO 7243-2005(2021) Hot environments－Estimation of the heat stress on working man, based on the WBGT－index(wet bulb globe temperature)

KR-KS, Equipment working environment Working temperature and humidity

KS W ISO 9662-2018 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests

British Standards Institution (BSI), Equipment working environment Working temperature and humidity

BS G 259:1996 Aircraft equipment. Environmental and operating conditions for airborne equipment. Humidity, temperature and pressure tests
BS EN 14706:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
BS EN 14706:2006 Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature
BS IEC 61624:1998 Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
BS EN 14707:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
BS EN 14707:2005+A1:2007 Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation
BS EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industria
BS 5422:2001 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C
BS ISO 18096:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Equipment working environment Working temperature and humidity

ASHRAE 4167-1998 The Effects of Temperature@ Light@ and Sound on Perceived Work Environment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Equipment working environment Working temperature and humidity

GB/T 5170.18-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5170.18-1987 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments
GB/T 5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Temperature testing equipments
GB/T 5170.19-1989 Inspection methods for basic parameters of environmen-tal testing equipments for electric and electronic products--Combined temperature/vibration (sinusoidal)testing equipments
GB/T 5170.19-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Combined temperature/vibration(sinusoidal)testing equipments

Danish Standards Foundation, Equipment working environment Working temperature and humidity

DS/ISO 7243:1994 Ergonomics - Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
DS 2323:1986 Ergonomics. hot environments. Estimation of the heat stress on working, man based on the WBGT-index (wet bulb globe temperature)

Professional Standard - Electron, Equipment working environment Working temperature and humidity

SJ/Z 9107.1-1987 Operating conditions for industrial-process measurement and control equipment Part 1: Temperature, humidity and atmospheric pressure

European Committee for Electrotechnical Standardization（CENELEC）, Equipment working environment Working temperature and humidity

HD 413.1-1980 Operating Conditions for Industrial - Process Measurement and Control Equipment Part 1: Temperature Humidity and Barometric Pressure

ATIS - Alliance for Telecommunications Industry Solutions, Equipment working environment Working temperature and humidity

0600010.01-2014 Temperature@ Humidity@ and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments
0600010.01-2008 Temperature@ Humidity@ and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments (Pre-Pub)

Lithuanian Standards Office , Equipment working environment Working temperature and humidity

LST EN 27243-2001 Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989)

German Institute for Standardization, Equipment working environment Working temperature and humidity

DIN EN 27243:1993 Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989); German version EN 27243:1993

Association Francaise de Normalisation, Equipment working environment Working temperature and humidity

NF X35-201:1994 Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).
NF P52-306-1:1993 DTU 65.20 - Thermal insulation of circuits, appliances and accessories - Working temperature greater than ambient temperature - Part 1 : technical specifications.
NF P75-449:2006 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature.
NF P75-449*NF EN 14706:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
NF P52-306-2:1993 DTU 65-20. Thermal insulation of circuits, appliances and accessories. Working temperature greater than ambient temperature. Part 2 : particular specifications.
NF C74-387:1987 Electromedical equipment. Temperature monitoring equipment. Particular requirements for safety and operating.
NF C20-011:1980 Guide for design,supply,utilisation of industrial equipments which are submit to severe environmental contraints where heat and moisture are the most important

CZ-CSN, Equipment working environment Working temperature and humidity

CSN ISO 7243:1993 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
CSN 42 0283-1979 Regulations for treatment of carbon and alloy formed steels used for pressure equipment working at lower temperatures

European Committee for Standardization (CEN), Equipment working environment Working temperature and humidity

HD 413.1 S1-1981 Operating conditions for industrial-process measurement and control equipment; part 1: temperature, humidity and barometric pressure
EN 14706:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
EN 14707:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation
EN 2267-011:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard

BE-NBN, Equipment working environment Working temperature and humidity

NBN X 10-003-1986 Warme Umgebung - Bestimmung der Warme EngigkeitThermal environments - Determination of thermal stress

VN-TCVN, Equipment working environment Working temperature and humidity

TCVN 7112-2002 Ergonomics.Hot environments.Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)

AT-ON, Equipment working environment Working temperature and humidity

ONORM EN 27243-1994 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989)

CEN - European Committee for Standardization, Equipment working environment Working temperature and humidity

EN 14706:2005 Thermal insulation products for building equipment and industrial installations Determination of maximum service temperature

Group Standards of the People's Republic of China, Equipment working environment Working temperature and humidity

T/CEC 424-2020 On-site treatment procedures for sulfur hexafluoride inflatable equipment with excessive humidity

American Society for Testing and Materials (ASTM), Equipment working environment Working temperature and humidity

ASTM C1146-96 Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C1146-09(2018) Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C667-01 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-92(1996)e1 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-17(2022) Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-09(2014) Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

Defense Logistics Agency, Equipment working environment Working temperature and humidity

DLA QPL-83733-9 NOTICE 1-2008 Connectors, Electrical, Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature
DLA MIL-C-83527/8 VALID NOTICE 3-2011 Connector, Receptacle, Electrical, Rectangular, Rack to Panel, Environment Resisting, 150 Deg. C Continuous Operating Temperature, Multiple Inserts
DLA QPL-83733-2013 Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification for
DLA QPL-83733-QPD-2012 Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification for
DLA MIL-DTL-83733 E SUPP 1-2013 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200癈 TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR

Society of Automotive Engineers (SAE), Equipment working environment Working temperature and humidity

SAE AS6224/1-2020 REPAIR SLEEVE, PRIMARY WIRE INSULATION DAMAGE, ELECTRIC, PERMANENT, ENVIRONMENT RESISTANT, 150 °C MAXIMUM OPERATING TEMPERATURE
SAE AS6224/2-2019 REPAIR SLEEVE, LARGE WIRE/CABLE INSULATION DAMAGE, ELECTRIC, PERMANENT, ENVIRONMENT RESISTANT, 260 °C MAXIMUM OPERATING TEMPERATURE, TYPE II

SAE - SAE International, Equipment working environment Working temperature and humidity

SAE AS6224/1-2015 REPAIR SLEEVE@ PRIMARY WIRE INSULATION DAMAGE@ ELECTRIC@ PERMANENT@ ENVIRONMENT RESISTANT@ 150 °C MAXIMUM OPERATING TEMPERATURE

Professional Standard - Machinery, Equipment working environment Working temperature and humidity

JB/T 11625-2013 Electrical apparatus for use in the presence of combustible dust.Dust explosion-proof operating post by enclosures and surface temperature limitation-specification for apparatus

NATO - North Atlantic Treaty Organization, Equipment working environment Working temperature and humidity

STANAG 2415-1990 Procedures for Operation of Mechanical Ground Equipment to Minimize Diesel Fuel Problems at Low Ambient Temperature (ED 1 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.na

RU-GOST R, Equipment working environment Working temperature and humidity

GOST 33229-2015 Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C