ZH

RU

ES

Infrared Determination Method of Film

Infrared Determination Method of Film, Total:500 items.

In the international standard classification, Infrared Determination Method of Film involves: Water quality, Optics and optical measurements, Organic chemicals, Rubber and plastics products, Ferrous metals, Domestic, commercial and industrial heating appliances, Testing of metals, Rotating machinery, Vocabularies, Rubber, Animal feeding stuffs, Edible oils and fats. Oilseeds, Paper and board, Ferroalloys, Products of the chemical industry, Semiconducting materials, Thermodynamics and temperature measurements, Fuels, Burners. Boilers, Non-ferrous metals, Medical equipment, Wastes, Soil quality. Pedology, Food products in general, Optoelectronics. Laser equipment, General methods of tests and analysis for food products, Analytical chemistry, Air quality, Construction industry, Inorganic chemicals, Lubricants, industrial oils and related products, Metalliferous minerals, Power stations in general, Iron and steel products, Protection of and in buildings, Open systems interconnection (OSI), Non-destructive testing, Plastics, Geology. Meteorology. Hydrology, Powder metallurgy, Coatings and related processes used in aerospace industry, Paints and varnishes, Construction materials, Bridge construction, Protection against fire, Cereals, pulses and derived products, Non-metalliferous minerals, Fertilizers, Materials for the reinforcement of composites, Paint ingredients, Insulating fluids, Farming and forestry, Biology. Botany. Zoology, Surface treatment and coating, Environmental protection, Nuclear energy engineering, Test conditions and procedures in general, Coals, Tobacco, tobacco products and related equipment, Beverages, Energy and heat transfer engineering in general, Wind turbine systems and other alternative sources of energy, Sugar. Sugar products. Starch.


American Society for Testing and Materials (ASTM), Infrared Determination Method of Film

  • ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D7575-10 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D7575-11(2017) Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D4053-98(2003) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D4053-98 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM F1188-00 Standard Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM F1249-06(2011) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D4214-23 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
  • ASTM D3456-86(2002) Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
  • ASTM D4214-07 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
  • ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
  • ASTM F1249-90(1995) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-01 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-88(1997) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1447-05 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM D7573-18 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • ASTM D7573-18a Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • ASTM D7573-09(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • ASTM D7573-18ae1 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
  • ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
  • ASTM C1408-98(2004) Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
  • ASTM C1408-98 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
  • ASTM C1408-09 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
  • ASTM C1408-16 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
  • ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
  • ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers

国家市场监督管理总局、中国国家标准化管理委员会, Infrared Determination Method of Film

  • GB/T 40293-2021 Test method for refractive index of infrared optical chalcogenide films
  • GB/T 4333.10-2019 Ferrosilicon—Determination of carbon content—Infrared absorption method
  • GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method
  • GB/T 24583.7-2019 Vanadium-nitrogen—Determination of oxygen content—Infrared absorption method
  • GB/T 24583.6-2019 Vanadium-nitrogen—Determination of sulfur content—Infrared absorption method
  • GB/T 24583.4-2019 Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
  • GB/T 14949.11-2021 Manganese ores—Determination of carbon content—Gravimetric method and infrared absorption method
  • GB/T 1557-2018 Test method for determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 36691-2018 Methyl vinyl silicone rubber—Determination of vinyl content—Near infrared spectroscopy

Professional Standard - Chemical Industry, Infrared Determination Method of Film

  • HG/T 5077-2016 Optical functional films.Measuring method of the near infrared spectral transmittance
  • HG/T 4915-2016 White reflective films.Determination of reflectance

Association Francaise de Normalisation, Infrared Determination Method of Film

  • NF EN ISO 15106-2:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 2 : méthode utilisant un détecteur infrarouge
  • NF T54-142-2*NF EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2 : infrared detection sensor method
  • XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
  • XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
  • NF X43-311*NF EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method : non-dispersive infrared method.
  • NF A06-558*NF EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method).
  • NF T60-262*NF EN ISO 13884:2005 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry.
  • XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • NF X31-016*NF EN ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • NF L16-010*NF EN 4592:2007 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance.
  • NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
  • NF EN ISO 21258:2010 Émissions de sources fixes - Détermination de la concentration massique de protoxyde d'azote (N2O) - Méthode de référence : méthode infrarouge non dispersive
  • NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
  • NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
  • NF EN 13187:1999 Performance thermique des bâtiments - Détection qualitative des irrégularités thermiques sur les enveloppes de bâtiments - Méthode infrarouge.
  • NF EN IEC 63180:2020 Méthodes de mesure et qualification de la plage de détection des détecteurs - Détecteurs infrarouges passifs pour la détection de mouvements de forte et de faible amplitude
  • NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
  • NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
  • NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
  • NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.

Professional Standard - Aerospace, Infrared Determination Method of Film

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared Determination Method of Film

  • GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting.Infrared detection sensor method
  • GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
  • GB/T 8705.3-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
  • GB/T 5687.8-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of sulfur content
  • GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
  • GB/T 5059.9-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of sulfur content
  • GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
  • GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
  • GB/T 4701.10-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content
  • GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
  • GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
  • GB/T 7731.12-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content
  • GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
  • GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
  • GB/T 4701.8-2009 Ferrotitanium-Determination of carbon content-The infrared absorption method
  • GB/T 3653.7-2020 Ferroboron—Determination of sulfur content—Infrared absorption method
  • GB/T 5059.7-2014 Ferromolybdenum.The determination of carbon content.Infrared absorption method
  • GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
  • GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
  • GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
  • GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
  • GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
  • GB/T 7287.1-1987 Detecting method for size, shape and exterior of infrared heater
  • GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
  • GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
  • GB/T 5686.7-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content
  • GB/T 4699.6-1988 Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content
  • GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
  • GB/T 24583.4-2009 Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
  • GB/T 24583.6-2009 Vanadium-Nitrogen alloy.Determination of sulfur content.The infrared absorption method
  • GB/T 24583.7-2009 Vanadium-Nitrogen alloy.Determination of oxygen content.The infrared absorption method
  • GB/T 14849.6-2014 Methods for chemical analysis of silicon metal.Part 6:Determination of carbon.Infrared absorption method
  • GB/T 8647.8-2006 The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8647.9-2006 The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 25274-2010 Films for liquid crystal display(LCD).Determination of ultraviolet absorbance
  • GB/T 4324.27-2012 Methods for chemical analysis of tungsten.Part 27:Determination of carbon content.High frequency combustion -infrared absorption method
  • GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
  • GB/T 26051-2010 Hardmetals.Determination of sulfur and carbon contents in cobalt metal powders.Infrared detection method
  • GB/T 8704.3-1997 Methods for chemical analysis of ferrovanadium. The infrared absorption method and the combustion neutralization titration method for the determination of sulfur content
  • GB/T 8704.1-1997 Methods for chemical analysis of ferrovandium. The infrared absorption method and the gasometric method for the determination of carbon content
  • GB/T 1557-1989 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 1557-2006 The method of determining interstitial oxygen content in silicon by infrared absorption
  • GB/T 4701.10-2008 Ferrotitanium. Determination of sulfur content. Infrared absorption method and combustion-neutralization titration method
  • GB/T 7731.12-2008 Ferrotungsten. Determination of sulfur content. Infrared absorption method and combustion titration method
  • GB/T 8704.3-2009 Ferrovanadium.Determination of sulfur content.The infrared absorption method and the combustion-neutralization titration method
  • GB/T 1819.10-2004 Methods for chemical analysis of tin concentrates Determination of sulphur content-The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
  • GB/T 26416.5-2010 Chemical analysis methods of dysprosium ferroalloy.Part 5: Determination of oxygen content.Impulse-infrared conductance absorption method
  • GB/T 20975.26-2013 Methods for chemical analysis of aluminium and aluminium alloys.Part 26:Determination of carbon content.Infrared absorption method
  • GB/T 20975.26-2013(英文版) Methods for chemical analysis of aluminium and aluminium alloys—Part 26:Determination of carbon content—Infrared absorption method
  • GB 8150.3-1987 Methods for chemical analysis of xanthates--The infrared drying method for determination of moisture and volatile matter content
  • GB/T 8647.9-1988 Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8647.10-1988 Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 8570.6-1988 Liquefied anhydrous ammonia--Determination of oil content--Gravimetric and infra-red methods
  • GB/T 5059.9-2008 Ferromolybdenum.Determination of sulfur content.The infrared absorption method and the combustion-iodate volumetric method
  • GB/T 8704.1-2009 Ferrovanadium-Determination of carbon content-The infrared absorption method and the gasometric method
  • GB/T 16488-1996 Water quality--Determination of petroleum oil, animal and vegetable oils--Infrared photometric method
  • GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods
  • GB/T 4325.25-2013 Methods for chemical analysis of molybdenum.Part 25:Determination of hydrogen content.Inert gas fusion infrared absorption method/thermal conductivity method
  • GB/T 25149-2010 Test method for the quality of carbon steel passivation film in chemical cleaning of industrial equipment red dot method
  • GB/T 4702.16-2008 Chromium metal. Determination of sulfur content. Infrared absorption method and combustion-neutralization titration method
  • GB/T 20123-2006 Steel and iron - Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
  • GB/T 7730.8-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of sulfur content
  • GB/T 7730.5-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of carbon content
  • GB/T 14847-1993 Test method for thickness of lightly doped silicon eqitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 14847-2010 Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
  • GB/T 13193-1991 Water quality--Determination of TOC by nondispersive infrared absorption method
  • GB 13193-1991 Determination of total organic carbon (TOC) in water by non-dispersive infrared absorption method
  • GB/T 4700.7-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method and the combustion-potassium iodate titration method for the determination of sulfur content
  • GB/T 4325.21-2013 Methods for chemical analysis of molybdenum.Part 21:Determination of carbon content and sulfur content.High frequency combustion-infrared absorption method
  • GB/T 3260.9-2013 Methods for chemical analysis of tin.Part 9:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
  • GB/T 26416.7-2023 Chemical Analysis Methods of Rare Earth Ferroalloys Part 7: Determination of Carbon and Sulfur Content by High Frequency-Infrared Absorption Method
  • GB/T 26416.5-2022 Chemical analysis method for rare earth ferroalloy—Part 5: Determination of oxygen content—Impulse-infrared absorption method
  • GB/T 12967.4-2014 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
  • GB/T 42275-2022 Hardmetals—Determination of total carbon content—High frequency combustion infrared absorption or thermal conductivity method
  • GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
  • GB/T 6730.61-2005 Iron ores-Determination of carbon and sulfur content-High frequency combustion with infrared absorption method
  • GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
  • GB/T 23356-2009 Cigarettes.Determination of carbon monoxide in the vapour phase of cigarette smoke.NDIR method
  • GB/T 4324.25-2012 Methods for chemical analysis of tungsten.Part 25:Determination of oxygen content.Pulse heating inert gas fusion -infrared absorption method
  • GB/T 18932.8-2002 Method for the determination of erythromycin residues in honey--Cylinder plate method
  • GB/T 4324.23-2012 Methods for chemical analysis of tungsten.Part 23:Determination of sulfur content.The combustion-conductometric titration and high frequency combustion-infrared absorption method
  • GB/T 4325.23-2013 Methods for chemical analysis of molybdenum.Part 23:Determination of oxygen and nitrogen contents.Inert gas fusion-infrared absorption and thermal conductivity method

Professional Standard - Electron, Infrared Determination Method of Film

  • SJ/T 31128-1994 Requirements of readiness and methods of inspection and assessment for near infrared thick-film sintering furnaces
  • SJ 2758-1987 Method of measurement by infrared interference for thickness of homoepitaxial layers
  • SJ/T 10625-1995 Determination method for interstitial atomic oxygen content of germanium by infrared abaorption
  • SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
  • SJ 3247-1989 Methods of measurement for extended-layer thickness of same-type Gallium arsenide by infra-red interference
  • SJ 2658.8-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for normal radiance
  • SJ 2658.7-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for radiant flux
  • SJ 2658.10-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for modulated wideband
  • SJ 2658.6-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power
  • SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
  • SJ 2658.11-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for pulse response characteristics
  • SJ 3249.3-1989 Methods of measurement for chromium concentration in semi-insulation Gallium arsenide by infra-red absorption
  • SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
  • SJ 2658.13-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power temperature coefficient

工业和信息化部, Infrared Determination Method of Film

  • SJ/T 31128-2016 Integrity requirements and inspection and evaluation methods for near-infrared thick film sintering furnaces
  • YS/T 1166-2016 Determination method of infrared transmittance of high-purity germanium tetrachloride
  • YS/T 1230.4-2018 Methods for chemical analysis of copper anodes Part 4: Determination of oxygen content by pulsed infrared method
  • YB/T 4566.7-2016 Determination of vanadium iron sulfur content by infrared absorption method
  • YB/T 4566.8-2016 Determination of carbon content of vanadium iron nitride by infrared absorption method
  • YB/T 4566.9-2016 Determination of vanadium nitride iron oxygen content by infrared absorption method
  • YB/T 4582.10-2017 Determination of carbon content in silicon ferronitride by infrared absorption method
  • YB/T 4726.6-2021 Determination of sulfur content in iron-containing dust and mud by infrared absorption method
  • YB/T 4726.8-2021 Determination of carbon content in iron dust mud by infrared absorption method
  • YB/T 4582.4-2017 Determination of sulfur content in silicon iron nitride by infrared absorption method
  • YB/T 6059-2022 Method for determination of suspension stability of high-temperature infrared radiation coating suspensions
  • YS/T 1550.4-2022 Methods for chemical analysis of beryllium alloys Part 4: Determination of carbon content by infrared absorption method
  • YS/T 540.3-2018 Methods for chemical analysis of vanadium Part 3: Determination of carbon content High frequency combustion infrared absorption method
  • YS/T 540.7-2018 Methods for chemical analysis of vanadium Part 7: Determination of oxygen content Inert gas fusion infrared absorption method
  • HG/T 5674-2020 Method for determination of ultraviolet absorber content in triacetyl cellulose (TAC) films with optical functional films
  • YS/T 1550.5-2022 Methods for chemical analysis of beryllium alloys Part 5: Determination of oxygen content Inert gas fusion infrared absorption method
  • YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method
  • YS/T 1562.4-2022 Methods for chemical analysis of tungsten-copper alloys Part 4: Determination of carbon content High-frequency combustion infrared absorption method
  • YS/T 1525-2022 Chemical analysis methods for nickel-platinum alloys, determination of oxygen and nitrogen content, pulse-infrared absorption method and thermal conductivity detection method

国家林业和草原局, Infrared Determination Method of Film

  • LY/T 3203-2020 Method for determination of far-infrared emissivity of bamboo charcoal

Standard Association of Australia (SAA), Infrared Determination Method of Film

  • AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
  • AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
  • AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
  • AS 2864.1:2003 Methods for the analysis of rutile - Determination of titanium content - Titrimetric method
  • AS/NZS 1301.560:2016 Methods of test for pulp and paper, Method 560: Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
  • AS 2836.4:1998 Methods of testing surgical dressings and surgical dressing materials - Method for the determination of size
  • AS 1289.2.1.5:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method)

British Standards Institution (BSI), Infrared Determination Method of Film

  • BS EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Infrared detection sensor method
  • BS ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
  • BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
  • BS DD 220:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • BS EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
  • DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
  • BS EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
  • BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
  • BS EN ISO 17184:2014 Soil quality. Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • BS EN 15948:2012 Cereals. Determination of moisture and protein. Method using Near-Infrared- Spectroscopy in whole kernels
  • BS EN 15948:2015 Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
  • BS ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
  • PD ISO/TR 9686:2017 Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
  • 19/30387215 DC BS EN ISO 7526. Ferronickels. Determination of sulfur content. Infra-red absorption method after combustion in an induction furnace [Routine method]
  • 16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • 18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
  • BS EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method - Non-dispersive infrared method

Japanese Industrial Standards Committee (JISC), Infrared Determination Method of Film

  • JIS R 1803:2005 Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region
  • JIS A 1423:1983 Simplified test method for emissivity by infrared radio meter
  • JIS A 1423:2017 Simplified test method for normal emissivity by infrared radiation thermometer
  • JIS G 1211-3:2018 Iron and steel -- Determination of carbon -- Part 3: Infrared absorption method after combustion
  • JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion

Professional Standard - Electricity, Infrared Determination Method of Film

  • DL/T 1524-2016 Guide for infrared detection and evaluation of generators
  • DL/T 1607-2016 Measurement of sulfur hexafluoride decomposition using infrared spectroscopy method

Anhui Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB34/T 3561-2019 Near-infrared method for rapid determination of conventional indicators of brewing raw materials
  • DB34/T 3054-2017 Rapid Determination Method of Main Aroma Components in Luzhou-flavor Base Liquor by Near Infrared Method
  • DB34/T 2561-2015 Near-infrared method for rapid determination of routine indicators of solid-state fermented grains

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared Determination Method of Film

  • GJB 5384.20-2005 Test methods of performance for pyrotechnic composition Part 20: Determination of infrared screening time Infrared thermal imaging sets method
  • GJB 5384.18-2005 Test methods of performance for pyrotechnic composition Part 18: Determination of IR extinction coefficient
  • GJB 5384.13-2005 Test methods of performance for pyrotechnic composition Part 13: Effective IR radiant efficiency Bandpass method

Military Standard of the People's Republic of China-General Armament Department, Infrared Determination Method of Film

  • GJB 8684.20-2015 Pyrotechnic performance test methods Part 20: Determination of infrared shielding time Infrared thermal imaging camera method
  • GJB 5214.19-2003 Special bomb effect test method Part 19: Bandpass method for measuring infrared radiation intensity of infrared jamming bombs
  • GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
  • GJB 9723-2020 On-board radiation calibration method for spaceborne Earth observation infrared cameras
  • GJB 8684.18-2015 Pyrotechnic powder performance test methods Part 18: Determination of infrared extinction coefficient

German Institute for Standardization, Infrared Determination Method of Film

  • DIN EN ISO 15106-2:2005-05 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN ISO 15106-2:2005
  • DIN EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN ISO 15106-2:2005
  • DIN EN 15948:2020-12 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
  • DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
  • DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
  • DIN 53380-4:2006-11 Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings
  • DIN EN ISO 15350:2010-08 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000); German version EN ISO 15350:2010
  • DIN EN 4592:2007 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance; German and English version EN 4592:2006
  • DIN 51453:2004-10 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
  • DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN EN 13187:1999-05 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998 / Note: To be replaced by DIN EN ISO 6781-1 (2021-05).
  • DIN 51639-4:2020-11 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
  • DIN 51433:1992 Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method
  • DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
  • DIN CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020

VN-TCVN, Infrared Determination Method of Film

  • TCVN 7875-2008 water.Determination of oil and grease.Partition-infrared method
  • TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
  • TCVN 7369-2004 Soils quality.Determination of mineral oil content.Method by infrared spectrometry and gas chromatographic method

Hunan Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB43/T 1065-2015 Determination of amino acid in feed by near infrared method
  • DB43/T 2263-2021 Determination of organic carbon and sulfur by tube-type resistance furnace infrared method

Sichuan Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB5115/T 80-2022 Determination of rice fatty acid value by near infrared method
  • DB51/T 1922-2014 Determination of Toluene Content in Gasoline by Infrared Spectroscopy
  • DB51/T 1919-2014 Determination of N-Methylaniline in Gasoline by Infrared Spectrometry
  • DB51/T 1925-2014 Determination of Dimethyl Carbonate in Gasoline by Infrared Spectroscopy
  • DB51/T 1694-2013 Determination of Methanol and Oxygen Content in Gasoline by Infrared Spectroscopy

Korean Agency for Technology and Standards (KATS), Infrared Determination Method of Film

  • KS M ISO 15106-2:2008 Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method
  • KS M ISO 15106-2-2008(2018) Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method
  • KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS D ISO 17053-2006(2016) Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS E ISO 4689-3:2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS X 6916-2006 Conformity Assessment in Infrared DSRCStandard for ITS applications
  • KS I ISO 4224:2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method
  • KS M ISO 12965-2007(2017) Butadiene rubber-Determination of microstructure by infra-red spectrometry
  • KS D ISO 17053:2006 Steel and iron-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 17053:2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS I ISO 21258:2022 Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide(N2O) — Reference method: Non-dispersive infrared method
  • KS M ISO 7106:2002 Liquefied anhydrous ammonia for industrial use-Determination of oil content-Gravimetric and infra-red spectrometric methods
  • KS M ISO 7106:2017 Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods
  • KS E ISO 9686-2011(2016) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS E ISO 9686-2011(2021) Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS I ISO 4224:2006 Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS E ISO 9686:2011 Direct reduced iron-Determination of carbon and/or sulfur-High-frequency combustion method with infrared measurement
  • KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
  • KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 4935:2002 Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS I ISO 4224-2006(2016) Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS D ISO 4935-2002(2022) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace
  • KS D ISO 22963-2010(2020) Titanium and titanium alloys-Determination of oxygen-Infrared method after fusion under inert gas
  • KS D ISO 4935-2002(2017) Steel and iron-Determination of total sulphur content-Infrared absorption method after combustion in an induction furnace

International Organization for Standardization (ISO), Infrared Determination Method of Film

  • ISO 15106-2:2003 Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
  • ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
  • ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
  • ISO 17184:2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • ISO/DIS 24476 Steel – Determination of oxygen – Infrared absorption method after fusion under inert gas (Routine method)
  • ISO 4224:2000 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
  • ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO/TR 9686:2017 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
  • ISO 9686:2006 Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
  • ISO 7106:1985 Liquefied anhydrous ammonia for industrial use; Determination of oil content; Gravimetric and infra-red spectrometric methods
  • ISO 6781:1983 Thermal insulation; Qualitative detection of thermal irregularities in building envelopes; Infrared method
  • ISO/PRF 13093:1972 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace
  • ISO 13093:2023 Titanium and titanium alloys — Determination of carbon — Infrared absorption method after combustion in an induction furnace

Danish Standards Foundation, Infrared Determination Method of Film

  • DS/EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
  • DS/R 209:1980 Determination of oil and grease in water. Infrared spectrophotometric method
  • DS/EN 4592:2006 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance
  • DS/EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
  • DS/R 209:2006 Determination of oil and grease in water - Extraction with tetrachloroethylene and measurement by infrared spectrophotometry
  • DS/EN 15058:2006 Stationary source emissions – Determination of the mass concentration of carbon monoxide (CO) – Reference method: Non-dispersive infrared spectrometry
  • DS/EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • DS/EN 15948:2020 Cereals – Determination of moisture and protein – Method using Near-Infrared Spectroscopy in whole kernels
  • DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace
  • DS/EN ISO 13884:2005 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry
  • DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
  • DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace

Professional Standard - Forestry, Infrared Determination Method of Film

  • LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
  • LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Professional Standard - Light Industry, Infrared Determination Method of Film

  • QB/T 2812-2006 Paper-online determination of weight and moisture (The near infrared method)

Professional Standard - Ferrous Metallurgy, Infrared Determination Method of Film

  • YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
  • YB/T 5341-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Sulfur Content
  • YB/T 5339-2015 Ferrophosphorus.Determination of carbon content.The infrared absorption method
  • YB/T 5341-2015 Ferrophosphorus.Determination of sulfur content.The infrared absorption method
  • YB/T 4311-2012 Molybdenum oxide.Determination of sulfur content.The infrared absorption method
  • YB/T 4312-2012 Molybdenum oxide.Determination of carbon content.The infrared absorption method
  • YB/T 191.7-2001 Methods for chemical analysis of chromium ores----The infrared absorption method for the determination of sulfur content
  • YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
  • YB/T 109.7-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the derermination of sulfur content
  • YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
  • YB/T 109.6-2012 Silicon barium alloy.Determination of carbon content.The infrared absorption method
  • YB/T 109.7-2012 Silicon barium alloy.Determination of sulfur content.The infrared absorption method
  • YB/T 5333-2009 Determination of sulfur content in vanadium pentoxide by infrared absorption method
  • YB/T 5317-2006 Calcium silicon alloy chemical analysis method infrared absorption method and combustion potassium iodate titration method for determination of sulfur content
  • YB/T 178.6-2000 Methods for chemical analysis silicon-aluminium alloy and silicon-barium-aluminium alloy.The infrared absorption method for the determination of carbon content

Henan Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB41/T 1050-2015 Ferrosilicon Chemical Analysis Method Infrared Absorption Method for Determination of Sulfur Content
  • DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

European Committee for Standardization (CEN), Infrared Determination Method of Film

  • prEN 238-1985 Liquid petroleum products; determination of the benzene content; infrared spectrometric method
  • CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
  • EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)
  • EN 4592:2006 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance
  • EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry

Professional Standard - Agriculture, Infrared Determination Method of Film

  • 303药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4002 Determination of packaging materials by infrared spectroscopy
  • GB 8570.6-1988 Determination of the content of liquid anhydrous ammonia oil by gravimetric and infrared spectroscopic methods

Yunnan Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB53/T 749-2016 Determination of Moisture in Industrial Silica Fume by Infrared Heating Method

Professional Standard - Non-ferrous Metal, Infrared Determination Method of Film

  • YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
  • YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
  • YS/T 281.20-2011 Methods for chemical analysis of cobalt.Part 20:Determination of oxide content.Impulse infrared absorption
  • YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
  • YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
  • YS/T 281.14-1994 Cobalt - Determination of sulphur content - Infra-red absorption method after high frequency induction furnace combustion
  • YS/T 281.15-1994 Cobalt - Determination of carbon content - Infra-red absorption method after high frequency induction furnace combustion
  • YS/T 271.3-1994 Chemical Analysis Method of Xanthate Determination of Moisture and Volatile Content by Infrared Drying Method
  • YS/T 1035-2015 Determination of carbon content in aluminum electrolyte.IR absorption spectrometry method
  • YS/T 575.24-2009 Method for chemical analysis of aluminum ores.Part 24:Determination of carbon content and sulfur content.Infrared absorption method
  • YS/T 710.3-2009 Method for chemical analysis of cobalt oxide.Part 3:Determination of sulphur content.High frequency combustion-infrared absorption method
  • YS/T 1028.4-2015 Methods for chemical analysis of lithium iron phosphate.Part 4:Determination of carbon content.High frequency combustion with infrared absorption method
  • YS/T 861.4-2013 Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
  • YS/T 281.13-2011 Methods for chemical analysis of cobalt.Part 13:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
  • YS/T 281.14-2011 Methods for chemical analysis of cobalt.Part 14:Determination of carbon content.Infra-red absorption method after high frequency induction furnace combustion

Group Standards of the People's Republic of China, Infrared Determination Method of Film

  • T/GDSBME 006-2023
  • T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method
  • T/CECS 10149-2021 Determination of Concrete Admixture Quality Consistency Infrared Spectroscopy
  • T/IAWBS 007-2018 Test method for thickness of 4H silicon carbide homo-epitaxial layers by infrared reflectance
  • T/CIQA 66-2023 Rapid determination of water content in ores-Far infrared drying method
  • T/CMES 08006-2020 Determination of Sulfur Content in Carburizers High Frequency Combustion Infrared Absorption Method
  • T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
  • T/NAIA 0152-2022 Determination of alcohol content and total extracts in wine by near-infrared-density method
  • T/CSTE 0007-2020 Determination of Trace Carbon Monoxide in Hydrogen Fuel - The Method of Mid-infrared Laser Spectroscopy for PEMFC

Hebei Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB13/T 2589-2017 Infrared Spectrophotometric Method for Determination of Industrial Fume Concentration
  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method
  • DB13/T 5029-2019 Determination of Methanol Content in Alcohol-Based Fuels - Gas Chromatography - Infrared Spectroscopy

RU-GOST R, Infrared Determination Method of Film

  • GOST R 54039-2010 Soil quality. Quick method for the determination of oil products by NIR spectroscopy
  • GOST R 54039-2010(2019) Soil quality. Quick method for the determination of oil products by NIR spectroscopy
  • GOST 31871-2012 Motor and aviation gasolines. Determination of benzene by method of infrared spectroscopy
  • GOST 17554-1972 Ion-exchange membranes. Method for determination of water
  • GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
  • GOST 32465-2013 Solid mineral fuel. Determination of sulfur by IR spectrometry

Professional Standard - Environmental Protection, Infrared Determination Method of Film

  • HJ 1051-2019 Soil Petroleum Determination Infrared Spectrophotometry
  • HJ 695-2014 Soil.Determination of organic carbon.Combustion oxidation nondispersive infrared absorption method
  • HJ 965-2018 Non-dispersive infrared method for automatic determination of carbon monoxide in ambient air
  • HJ 692-2014 Stationary source emission.Determination of nitrogen oxides.Non-dispersive infrared absorption method
  • HJ/T 44-1999 Stationary source emission.Determination of carbon monoxide.Non-dispersive infrared absorption method
  • HJ 870-2017 Stationary source emission - Determination of carbon dioxide - Non-dispersive infrared absorption method
  • HJ 629-2011 Stationary source emission.dtermination of sulphur dioxide.Non-dispersive infrared absorption method
  • HJ 1077-2019 Infrared Spectrophotometric Method for Determination of Oil Fume and Oil Mist in Exhaust Gases from Stationary Pollution Sources

Association of German Mechanical Engineers, Infrared Determination Method of Film

  • VDI 3866 Blatt 2-2001 Determination of asbestos in technical products - Infrared spectroscopy method
  • VDI 3793 Blatt 1-1990 On-site determination of vegetational injuries; method of aerial photography with color infrared film

IT-UNI, Infrared Determination Method of Film

  • UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • UNI EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

Lithuanian Standards Office , Infrared Determination Method of Film

  • LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
  • LST EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)
  • LST EN 4592-2007 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance
  • LST EN 15058-2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry
  • LST EN 15948-2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • LST EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
  • LST ISO 4224:2001 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method
  • LST EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)

KR-KS, Infrared Determination Method of Film

  • KS M ISO 7106-2017 Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and infra-red spectrometric methods
  • KS I ISO 4224-2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method
  • KS D ISO 17053-2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
  • KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
  • KS E ISO 4689-3-2017 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
  • KS I ISO 21258-2022 Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide(N2O) — Reference method: Non-dispersive infrared method
  • KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace

未注明发布机构, Infrared Determination Method of Film

  • DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
  • BS EN ISO 13884:2005(2006) Animal and vegetable fats and oils — Determination of isolated trans isomers by infrared spectrometry
  • BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace

ES-UNE, Infrared Determination Method of Film

  • UNE-EN 4592:2006 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance (Endorsed by AENOR in January of 2007.)
  • UNE-EN 15948:2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
  • UNE-EN 62798:2014 Industrial electroheating equipment - Test methods for infrared emitters (Endorsed by AENOR in November of 2014.)
  • UNE-EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations (Endorsed by AENOR in October of 2013.)
  • UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)

AENOR, Infrared Determination Method of Film

  • UNE-EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)
  • UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
  • UNE 77252:2003 Ambient air. Determination of carbon monoxide. Non-dispersive infrared spectrometry method.
  • UNE-EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)

Professional Standard - Tobacco, Infrared Determination Method of Film

  • YC/T 30-1996 Cigarettes--Determination of carbon monoxide in the gas phase of smoke--NDIR method

NO-SN, Infrared Determination Method of Film

  • NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method

Zhejiang Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB33/T 989-2015 Determination of SBS Content in Modified Asphalt by Infrared Spectroscopy

Professional Standard - Rare Earth, Infrared Determination Method of Film

  • XB/T 601.4-2008 Chemical analysis methods of lanthanum boride.Determination of carbon content.High frequency induced combustion infrared ray absorbs method
  • XB/T 614.3-2011 Chemical analysis method of gadolinium-magnesium alloy.Part 3:Determination of carbon content.High frequency-infrared absorption method
  • XB/T 617.6-2014 Chemical analysis methods of neodymium iron boron alloy.Part 6:Determination of carbon content.High frequency-infrared absorption method
  • XB/T 610.3-2015 Chemical analysis methods for samarium-cobalt permanent magnet alloy.Part 3: Determination of oxygen content.Impulse-infrared absorption method
  • XB/T 610.3-2007 Chemical analysis methods for samarium cobalt permanent magnet alloy powder- Determination of oxygen content- Impulse-infrared absorption method
  • XB/T 601.9-1993 Lanthanum hexaboride chemical analysis method Determination of carbon content by high frequency induction combustion infrared absorption method

American National Standards Institute (ANSI), Infrared Determination Method of Film

  • ANSI/ASTM D6645:2001 Test Methods for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

Professional Standard - Urban Construction, Infrared Determination Method of Film

  • CJ 26.29-1991 Municipal sewage water quality inspection method standard Determination of total organic carbon non-dispersive infrared method
  • CJ/T 79-1999 Municipal sewage.Determination of total organic carbon.Nondispersive infrared method

中华人民共和国环境保护部, Infrared Determination Method of Film

  • GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

Professional Standard - Petrochemical Industry, Infrared Determination Method of Film

  • SH/T 1727-2004 Butadiene rubber--Determination of microstructure by infra-red spectrometry
  • SH/T 1727-2017 Determination of Microstructure of Butadiene Rubber by Infrared Spectroscopy

Professional Standard - Ocean, Infrared Determination Method of Film

  • HY/T 150-2013 Determination of organic carbon in sea water by nondispersive infrared absorption spectrometry
  • HY/T 196-2015 Determination of dissolved inorganic carbon in sea water using non-dispersive infrared absorption

Professional Standard - Commodity Inspection, Infrared Determination Method of Film

  • SN/T 3601-2013 Determination of total sulfur in graphite.Infrared absorption spectrometry
  • SN/T 3298-2012 Determination of propylene units in ethylene-propylene copolymer for import and export.Infrared spectroscopy method
  • SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method
  • SN/T 4363-2015 Determination of Sulfur Content in Copper Concentrates High Frequency Combustion Infrared Absorption Method
  • SN/T 4366-2015 Determination of Sulfur Content in Gold Ore High Frequency Combustion Infrared Absorption Method
  • SN/T 0481.8-2010 Methods for inspection of bauxite for export.Part 8:Determination of sulfur content.High frequency combustion-infrared absorption method

Xinjiang Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB65/T 4372-2021 Determination of Petroleum in Solid Waste Infrared Spectrophotometry

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Infrared Determination Method of Film

  • IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C

CZ-CSN, Infrared Determination Method of Film

  • CSN 58 8785-1994 Methods of test for fats and oils Determination of content of isolated trans-unsaturated compounds by infrared spectroscopy

Professional Standard - Meteorology, Infrared Determination Method of Film

  • QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

YU-JUS, Infrared Determination Method of Film

  • JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method

Shandong Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB37/T 2651-2015 Determination of Methylal Content in Motor Gasoline by Infrared Spectroscopy

农业农村部, Infrared Determination Method of Film

  • NY/T 3298-2018 Determination of crude protein in vegetable oils by near-infrared spectroscopy
  • NY/T 3297-2018 Determination of total phenols and tocopherols in rapeseed by near-infrared spectroscopy
  • NY/T 3299-2018 Determination of oleic acid and linoleic acid in vegetable oils by near-infrared spectroscopy

AT-ON, Infrared Determination Method of Film

  • ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)
  • OENORM EN 15948-2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
  • ONORM C 1158-1997 Testing of lubricants and related products - Determination of the rapid biodegradability - Infrared spectrometric method

BE-NBN, Infrared Determination Method of Film

  • NBN T 03-095-1988 Liquefied anhydrous ammoniafor industrial use - Détermination of oil content - Gravimetrie and infra-red spectrometric methods

CH-SNV, Infrared Determination Method of Film

  • SN EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

CEN - European Committee for Standardization, Infrared Determination Method of Film

  • PREN 15948-2018 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels

US-ACEI, Infrared Determination Method of Film

  • IPC TM-650 2.3.39-1997 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision B(Test Methods Manual)

Professional Standard - Aviation, Infrared Determination Method of Film

  • HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy
  • HB 5297.22-2001 Titanium Alloy Chemical Analysis Method High Frequency Induction Heating-Infrared Absorption Method Determination of Carbon Content

PL-PKN, Infrared Determination Method of Film

  • PN-EN 15948-2021-03 E Cereals -- Determination of moisture and protein -- Method using Near-Infrared Spectroscopy in whole kernels
  • PN C04194-1992 Petroleum products Determination of the benzene content in gasoline by infrared spectrophotometric method

Tianjin Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB12/T 955-2020 Determination of Nitrogen and Phosphorus in Dairy Farm Dung Water by Near Infrared Diffuse Reflectance Spectrometry

海关总署, Infrared Determination Method of Film

  • SN/T 5347.1-2021 Determination of carbon and sulfur content in chromium ore by high frequency infrared absorption method
  • SN/T 5250-2020 Determination of sulfur content in mineral products by high-frequency combustion infrared absorption method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared Determination Method of Film

  • GB/T 35535-2017 Detection of genetically modified components in soybean and canola—Membrane-based gene-chip method
  • GB/T 13747.24-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 24:Determination of carbon content—Infrared absorption method after high frequency combustion

Guangdong Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB44/T 1855-2016 Material Identification Method of Urea Formaldehyde Resin in Amino Molded Products Infrared Spectroscopy

RO-ASRO, Infrared Determination Method of Film

  • STAS SR ISO 6781:1995 Thermal insulation - Qualitative detection of thermal irregularities in building envelopes - Infrared method

Professional Standard - Customs, Infrared Determination Method of Film

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Jilin Provincial Standard of the People's Republic of China, Infrared Determination Method of Film

  • DB22/T 1812-2013 Non-destructive and rapid determination of ginseng polysaccharides in ginseng by near-infrared spectroscopy

国家能源局, Infrared Determination Method of Film

  • NB/T 10766-2021 Determination of moisture content of lignocellulosic biomass raw materials using near-infrared method
  • NB/T 10765-2021 Determination of calorific value of lignocellulosic biomass raw materials using near-infrared method
  • NB/T 10764-2021 Determination of ash content of lignocellulosic biomass raw materials using near-infrared method
  • NB/SH/T 0802-2019 Determination of 2,6-di-tert-butyl-p-cresol in insulating oil by infrared spectroscopy

GOSTR, Infrared Determination Method of Film

  • GOST 34567-2019 Meat and meat products. Method for determination of moisture, fat, protein, sodium chloride and ash using near infrared spectroscopy

中国石油化工总公司, Infrared Determination Method of Film

  • SH/T 0070-1991 Determination of oxidation value and nitration value in used internal combustion engine oil (infrared spectroscopy)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved