ZH
RU
ES

Detection capabilities and methods

Detection capabilities and methods, Total:500 items.

In the international standard classification, Detection capabilities and methods involves: Quality, Metrology and measurement in general, Mechanical testing, Optics and optical measurements, Thermodynamics and temperature measurements, Measurement of fluid flow, Elements of buildings, Measurement of force, weight and pressure, Environmental protection, Welding, brazing and soldering, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Earth-moving machinery, Energy and heat transfer engineering in general, Road vehicles in general, Linear and angular measurements, Electric road vehicles, Installations in buildings, Agricultural machines, implements and equipment, Transport, Farming and forestry, Vocabularies, Galvanic cells and batteries, Rotating machinery, Hydraulic construction, Medical sciences and health care facilities in general, Wastes, Technical product documentation, Standardization. General rules, Applications of information technology, Non-destructive testing, Chipless working equipment, Company organization and management, Glass, Road vehicle systems, Equipment for entertainment, Geology. Meteorology. Hydrology, Fuels, Animal feeding stuffs, Fishing and fish breeding, Biology. Botany. Zoology, Motor cycles and mopeds, Refrigerating technology, Construction industry, Clothes, Fluid power systems, Hydraulic energy engineering, Ceramics, Graphical symbols, Diagnostic, maintenance and test equipment, Semiconducting materials, Testing of metals, Packaging and distribution of goods in general, Bottles. Pots. Jars, Miscellaneous domestic and commercial equipment, Occupational safety. Industrial hygiene, Measurement of volume, mass, density, viscosity, Products of the textile industry, Plastics, Road engineering, Radiocommunications, Equipment for petroleum and natural gas industries, Burners. Boilers, Products of the chemical industry, Electronic tubes, Acoustics and acoustic measurements, Cutting tools, Woodworking equipment, Optoelectronics. Laser equipment, Sterilization and disinfection, Extraction and processing of petroleum and natural gas, Software development and system documentation, Photography, Cinematography, Lubricants, industrial oils and related products, Electromagnetic compatibility (EMC), Rubber and plastics products, Technical drawings, Radiation measurements, Protection against excessive pressure, Electrical engineering in general, Components for electrical equipment, Alarm and warning systems, Resistors, Analytical chemistry, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Leisure. Tourism, Mining equipment, Telecommunication systems, Vibrations, shock and vibration measurements, Special measuring equipment for use in telecommunications, Electronic components in general, Industrial automation systems, Structures of buildings, Sewing machines and other equipment for the clothing industry, Metalliferous minerals, Coals, Solar energy engineering, Paints and varnishes, Construction materials, Refractories, Milk and milk products, Audio, video and audiovisual engineering, Information sciences. Publishing, Semi-manufactures of timber, Telecommunication terminal equipment, Laboratory medicine, Fluid storage devices, Railway rolling stock, Construction technology, Machine tools, Rubber, Materials for the reinforcement of composites, Sugar. Sugar products. Starch, Lamps and related equipment, Furniture, Wood, sawlogs and sawn timber, Kitchen equipment, Protective equipment, Barrels. Drums. Canisters, Optical equipment, Wood-based panels, Mining and quarrying, Sports equipment and facilities, Aids for disabled or handicapped persons, Telecommunications in general.

RU-GOST R, Detection capabilities and methods

GOST ISO 11843-4-2005 Statistical methods. Capability of detection. Methodology for comparing the minimum detectable value with a given value
GOST 13782-1968 General-purpose spring dynamometers. Methods and means of verification
GOST R ISO 11843-2-2007 Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case
GOST 8.376-1980 State system for ensuring the uniformity of measurements. Universal instruments for measuring cvolvents. Methods and means of verification
GOST 8.287-1978 State system for ensuring the uniformity of measurements. Standard portable dynamometers of the 3-rd grade. Methods and means of calibration
GOST R ISO 11843-1-2007 Statistical methods. Capability of detection. Part 1. Terms and definitions
GOST 13818-1968 Lether thickness area measuring machine. Methods and means for verification
GOST R ISO 11843-7-2014 Statistical methods. Capability of detection. Part 7. Methods of an estimation taking into account background noise
GOST 24160-2014 Peat. Methods for the determination of water retention capacity and water absorption capacity
GOST R 53985-2010 Animal feeding stuffs. Method for the detection and enumeration of coliforms. Most probable number technique
GOST R ISO 11843-5-2012 Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases
GOST R 51151-1998 Garage equipment. Safety requirements and methods of inspection
GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
GOST 13904-2005 Glass containers. Methods of testing the resistance to internal hydrostatic pressure
GOST 13904-1993 Glass containers. Test methods for determining the resistance to internal pressure
GOST 13904-1985 Glass containers. Test methods for resistance by internal pressure
GOST 8.479-1982 State system for ensuring the uniformity of measurements. Piston pressure gauges. Methods and means of verification
GOST 8.136-1974 State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means
GOST ISO 11843-3-2005 Statistical methods. Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used
GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
GOST 8.154-1975 State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification
GOST 25502-1982 Objective lenses. Method for determining the photographic resolving power
GOST 8.237-2003 State system for ensuring the uniformity of measurements. Single-value electrical resistance measures. Verification procedure
GOST 8.493-1983 State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification
GOST 8.478-1982 State system for ensuring the uniformity of measurements. D. c. measuring potentiometers. Methods and means of verification
GOST 8.482-1983 State system for ensuring the uniformity of measurements. Glass butyrometers. Methods and means of verification
GOST 8.114-1974 State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification
GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
GOST 8.363-1979 State system for ensuring the uniformity of measurements. Measuring coil antennas. Verification methods and means
GOST 8.452-1982 State system for ensuring the uniformity of measurements. Radioisotope X-ray devices. Methods and means for verification
GOST 8.237-1977 State system for ensuring the uniformity of measurements. Measuring resistance coil. Methods and means of verification
GOST 24683-1981 Electrotechnical products. Methods of controlling resistance to attack by special media
GOST 21342.3-1987 Variable resistors. Test methods for resistance law
GOST R 55808-2013 Nondestructive testing. Ultrasonic transducers. Test methods
GOST 8.331-1999 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration
GOST 14768-1969 Working devices SSI. Methods for determination of capacity
GOST R ISO 11843-6-2015 Statistical methods. Capability of detection. Part 6. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
GOST 8.206-1976 State system for ensuring the uniformity of measurements. The measuring pulse generators. Methods and means for verification
GOST 8.211-1984 State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification
GOST 8.314-1978 State system for ensuring the uniformity of measurements. Low-frequency generators. Methods and means of verification
GOST R 54052-2010 Sonfectionery. Methods for determination of fineness degree of chocolate, chocolate products, chocolate half-finished products, cacao and glaze
GOST 33082-2014 Timber structures. Methods of determining the bearing capacity of the joints
GOST 22567.15-1995 Synthetic detergents. Method for determination of synthetic detergents capacity
GOST 18066-1972 Laminated glued wood. Method of determining bending ability
GOST 12288-1966 Mining rocks. Methods for the determination of mechanical properties by punching
GOST R ISO 7176-10-1996 Electric wheelchairs. Method of determination of obstacles climbing ability

British Standards Institution (BSI), Detection capabilities and methods

BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-7:2012 Capability of detection. Methodology based on stochastic properties of instrumental noise
BS ISO 11843-7:2018 Tracked Changes. Capability of detection. Methodology based on stochastic properties of instrumental noise
BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance. Capability of measurement processes
BS ISO 9186-2:2009 Graphical symbols. Test methods. Method for testing perceptual quality
BS ISO 9186-2:2008 Graphical symbols - Test methods - Method for testing perceptual quality
BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
BS ISO 22514-2:2013 Statistical methods in process management. Capability and performance. Process capability and performance of time-dependent process models
BS ISO 22514-2:2017 Statistical methods in process management. Capability and performance. Process capability and performance of time-dependent process models
BS 7603:1992 Method for determination of stresses in glass-to-glass sealings
BS EN ISO 17695:2005 Footwear. Test methods for uppers. Deformability
BS ISO 11843-3:2003 Capability of detection - Methodology for determination of the critical value for the response variable when no calibration data are used
BS ISO 11843-6:2019 Tracked Changes. Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

Group Standards of the People's Republic of China, Detection capabilities and methods

T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
T/GDCKCJH 051-2021 Performance requirements and test method for bar code verifier
T/GDCKCJH 078-2023 Performance requirements and test methods for heating plate
T/GDCKCJH 077-2023 Performance requirements and test methods for soldering furnaces
T/GDCKCJH 046-2021 Performance requirements and test method for helium mass spectrometer leak detector
T/GDCKCJH 049-2021 Performance requirements and test methods for ultraviolet energy meter
T/GDCKCJH 048-2021 Performance requirements and test methods for ultraviolet analyzer
T/CAB 0072-2020 Smart factory of printing—The method of control and test methods of crease stiffness and opening force in carton
T/GDCKCJH 043-2021 Performance requirements and test methods of mercury diffusion hydrogen tester
T/SCMES 2-2019 Physical and chemical testing personnel training and ability evaluation
T/CANSI 41-2021 Requirements and methods for performance testing of Marine optical fiber link
T/GDCKCJH 042-2021 Performance requirements and test methods of tapestry brick drawing instrument
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/GDCKCJH 050-2021 Performance requirements and test method for carbon dioxide incubator
T/GDCKCJH 067-2022 Performance requirements and testing methods for constant temperature oscillation incubator
T/FSYY 0050-2021 Retired traction battery echelon use — Test methods of residual capacity
T/CASEI T102-2015 Rapid Test Method for Braking Capability of Traction Lift
T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
T/CIAPS 0018-2022 Composition Detection Method and Toxicity Classification of Traction Battery Thermal Runaway Leakage
T/CEEIA 586-2022 Wind energy generation systems - integrated inspection, test and evaluation method of operation and grid connection performance
T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
T/ZSA 53-2018 Contents and methods of field test capability assessment for automated vehicle
T/CMAX 116-01-2020 Contents and methods of road test capability assessment for autonomous vehicles
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CAS 651-2022 Guidelines for hiring, competency development and assessment supervision of Inspection and testinglaboratory personnel
T/GDCKCJH 053-2021 Temperature performance requirements and test method for tunnel furnace of reflow soldering & wave soldering
T/SGGG 0001.2-2021 Energy-saving safety glass for exterior windows for home improvement Part 2: Performance requirements and testing methods
T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
T/CESA 1108-2020 Technical requirements and testing and evaluation methods for intelligent human body temperature detection and identification system
T/CECS 1197-2022 Selection and result application standards for proficiency verification of construction and building materials inspection and testing institutions
T/AHPCA 048-2023 Test method for anti-wrinkle and firming efficacy of cosmetics (test for anti-non-enzymatic glycosylation ability)
T/IAWBS 008-2019 Experimental method for residual stress in SiC wafers
T/ZSA 38-2020 Experimental method for residual stress in SiC wafers
T/CSAA 2-2020 Test method for residual stress analysis on thin wall parts
T/GDJD 006-2020 Performance classification and testing method ofintelligent clothes airing machine
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/GDID 1024-2020 Method for measurement of energy efficiency of traction driven elevator
T/CASME 325-2023 Testing method for performance of moist heat sterilizer
T/CSTM 00214-2020 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with convex surface
T/CSTM 00701-2023 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with concave surface
T/ZSA 94-2021 Contents and methods of road test capability assessment for service purpose electrical automated vehicle
T/CMAX 21001-2020 Content and method of road test capability evaluation of service-type electric self-driving wheeled vehicles
T/CTES 1017-2019 Textile Fabric Tactile Testing and Evaluation Method Three-Point Beam Method
T/GSEA 002-2023 Testing method for power quality of electrochemical energy storage-photovoltaic system
T/CADBM 45-2021 Testing method for decontamination performance of coating materials Environmental test chamber method
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
T/CECS 1092-2022 On-the-spot testing and evaluation standards for water-spraying masonry wall impermeability performance
T/TAF 086-2021 Technical requirements and test methods for security capabilities of smart television
T/ZJEI 002-2023 Industrial Internet - Automotive manufacturing - Communication requirements and test methods for 5G-based data acquisition
T/CMES 35010-2022 Detection method of laser directed energy deposition equipment
T/GDBX 039-2021 Energy efficiency testing and evaluation methods for approved elevators
T/CAS 614-2022 Test and evaluation methods of smoke collecting capacity for range hood
T/SHSIC 0101-2023

Association Francaise de Normalisation, Detection capabilities and methods

NF X06-048-4*NF ISO 11843-4:2004 Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value.
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF ISO 11843-5:2008 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire
NF E48-673:1989 Hydraulic fluid power. Filter elements. Methods for checking the compatibility of materials with fluids.
NF EN 60705:2015 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF EN 60705/A2:2018 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF EN ISO 17695:2005 Chaussures - Méthodes d'essai des tiges - Déformabilités
NF C26-250/A1:1983 Méthodes d'essai des matières isolantes - Aptitude au poinçonnage.
NF EN IEC 61591/A11:2020 Extracteurs de fumées de cuisine - Méthodes de mesure de l'aptitude à la fonction
NF EN IEC 61591:2023 Extracteurs de fumée de cuisine - Méthodes de mesure de l'aptitude à la fonction
NF ISO 22514-8:2014 Méthodes statistiques dans la gestion de processus - Aptitude et performance - Partie 8 : aptitude machine d'un procédé de production multimodal
NF EN 61121/A11:2019 Sèche-linge à tambour à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF EN 61121:2014 Sèche-linge à tambour à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF X06-075-7:2013 Statistical methods in process management - Capability and performance - Part 7: capability of measurement processes
NF H35-203*NF EN 13973:2003 Rigid plastics containers - Method for determination of drainability
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
NF X06-075-7*NF ISO 22514-7:2021 Statistical methods in process management - Capability and performance - Part 7 : capability of measurement processes

Danish Standards Foundation, Detection capabilities and methods

DS/ISO 11843-4:2004 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
DS/ISO 22514-7:2021 Statistical methods in process management – Capability and performance – Part 7: Capability of measurement processes
DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/ISO 22514-3:2020 Statistical methods in process management – Capability and performance – Part 3: Machine performance studies for measured data on discrete parts
DS/EN 13973:2002 Rigid plastics containers - Method for determination of drainability
DS/ISO 11843-6:2013 Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
DS/ISO 22514-7:2012 Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes

HU-MSZT, Detection capabilities and methods

Korean Agency for Technology and Standards (KATS), Detection capabilities and methods

KS Q ISO 11843-4-2009(2019) Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
KS Q ISO 11843-4:2009 Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
KS B ISO 16001:2012 Earth-moving machinery－Hazard detection systems and visual aids－Performance requirements and tests
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS B 8201-2004 Test method of thermal performance for solar storage tanks
KS B 8200-2006 Test method of thermal performance for solar collectors
KS B 8201-1999 Test method of thermal performance for solar storage tanks
KS R 4100-2017 Electric mopeds and Motorcycles — Methods measuring the performance of regenerative braking system
KS K 0801-2022 Measuring method for stretching ability of socks
KS Q ISO 11843-7:2013 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS Q ISO 11843-7:2019 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS A 1640-1995 Testing method of the characteristics and functions of automatic guided vehicles
KS B ISO 4815-2003(2008) Household sewing machines－Determination of sewing capacity
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS M 2172-2011(2016) Testing method for cooling ability of heat treating oils
KS Q ISO 11843-3-2009(2019) Capability of detection－Part 3：Methodology for determination of the critical value for the response variable when no calibration data are used
KS Q ISO 22514-7-2016(2021) Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
KS Q ISO 22514-7:2022 Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
KS Q ISO 22514-7:2016 Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes

SE-SIS, Detection capabilities and methods

SIS SS 01 42 14-1979 Statistical interpretation of data — Power of tests relating to means and variances
SIS SS-ISO 7842:1992 Automatic steam traps — Determination of discharge capacity — Test methods

German Institute for Standardization, Detection capabilities and methods

DIN ISO 11843-4:2006 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English)
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN EN ISO 17695:2005-12 Footwear - Test methods for uppers - Deformability (ISO 17695:2004); German version EN ISO 17695:2005
DIN EN 13184:2001 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
DIN 53902:2016 Testing of surface active agents - Determination of foaming power - Modified Ross-Miles-method

International Organization for Standardization (ISO), Detection capabilities and methods

ISO 11843-4:2003 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
ISO 22514-7:2021/DAmd 1 Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes — Amendment 1
ISO/CD 11843-7 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-6:2019 Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO 22514-7:2012 Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-7:2018 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-2:2000/cor 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case; Technical Corrigendum 1
ISO/DTR 22514-9 Statistical methods in process management — Capability and performance — Part 9: Process capability statistics for characteristics defined by geometrical specifications
ISO 22514-7:2021 Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes

ZA-SANS, Detection capabilities and methods

SANS 11843-4:2009 Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value
SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

Japanese Industrial Standards Committee (JISC), Detection capabilities and methods

JIS Z 8462-4:2006 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS B 8619:1999 Thermostatic refrigerant expansion valves -- Methods of testing for performance
JIS K 2519:1995 Lubricating oil -- Testing methods for load carrying capacity
JIS K 2519:2017 Lubricating oils -- Testing methods for load carrying capacity
JIS Z 2332:1993 Test method for leaks using the pressure change measurement
JIS Z 2332:2012 Leak testing method using pressure change
JIS Z 8462-5:2011 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
JIS B 7174:1962 Method for determining resolving power of photographic lenses
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments

Professional Standard - Speciality, Detection capabilities and methods

ZB Q14002.4-1988 Quality testing method of concrete components of farm buildings Mechanical performance testing method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection capabilities and methods

GB/T 9158-2015 Test methods of mechanics performance for windows and doors in building
GB/T 26773-2011 Intelligent transport systems.Lane departure warning systems.Performance requirements and test procedures
GB/T 36405-2018 Test method for stress in flat glass
GB/T 20608-2006 Intelligent transportation system-Adaptive cruise control systems-Performance requirements and test product
GB/T 36668.5-2020 Condition monitoring and fault diagnostics of amusement device—Part 5: Stress detection and monitoring methods
GB/T 7704-2008 Non-destructive testing.Practice for residual stress measurement by X-ray
GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
GB/T 17661-1999 Detection method of drying equipments performance of sawn timber
GB/T 11153-1989 Parameters testing method of laser power meter in low range
GB/T 11153-2012 Test methods of laser power meter in loveer-range
GB/T 32073-2015 Non-destructive testing.Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave
GB/T 15910-1995 Monitoring and testing method for energy saving of heat transmission and distribution system
GB/T 21662-2008 Quick testing method and evaluation for plastic shopping bags
GB/T 9158-1988 Mechanica test methods for windows
GB/T 31960.11-2016 Technical specification of power energy efficiency monitoring system.Part 11:Test specification of power energy efficiency information collection and exchange terminal
GB/T 26489-2011 Methods for measuring super amphiphilicity of nanomaterials
GB/T 26490-2011 Methods for measuring super hydrophobicity of nanomaterials
GB/T 22632-2008 Door leaves.Determination of the resistance to hard body impact
GB/T 26966-2011 Mine hoists.Test method for energy efficiency in hoist
GB/T 33260.5-2018 Capability of detection.Part 5:Methodology in the linear and nonlinear calibration cases
GB/T 15168-1994 Vibration and shock isolators measuring method for its characteristics
GB/T 12683-1990 Method for determining the tensile properties of photographic film and film base
GB/T 12683-2009 Method for determining the tensile properties of photographic film and film base
GB/T 28993-2012 Standard test methods for mechanical properties of structural lumber
GB/T 13331-1991 Test method for lifting capacity of hydraulic excavator
GB/T 31934-2015(英文版) "Measuring and calculation method for heat storage capacity of high radiative coating"
GB/T 4516-2013 Household sewing machine.Determination of sewing capacity
GB/T 4516-1995 Household sewing machines--Determination of sewing capacity
GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/T 26140-2023 Neutron Diffraction Method for Nondestructive Testing Residual Stress Measurement
GB/T 26140-2010 Non-destructive testing.Standards test method for determining residual stresses by neutron diffraction
GB/T 22388-2008 Determination of melamine in raw milk and dairy products
GB/T 21510-2008 Antimicrobial property detection methods for nano-inorganic materials
GB/T 18566-2001 Inspection and evaluation method of energy utilization for commercial vehicle
GB/T 15226-1994 Test method of air permeability performance for building curtain walls
GB/T 15227-1994 Test method of deformation under wind pressure for building curtain walls
GB/T 15228-1994 Test method of water penetration performance for building curtain walls
GB/T 32831-2016 Evaluation and test methods for beam quality of high energy laser
GB/T 15913-1995 Monitoring and testing method for energy saving of fan unit and distribution tube system
GB/T 14218-1993 Electronic lighting control equipment--Performance,Parameters and measurement methods
GB/T 15489.4-1995 Colour filter glass test methods Colour temperature conversion ability

国家市场监督管理总局、中国国家标准化管理委员会, Detection capabilities and methods

GB/T 33260.4-2018 Capability of detection—Part 4: Methodology for comparing the minimum detectable value with a given value
GB/T 37471-2019 Intelligent transportation systems—Lane change decision aid systems—Performance requirements and test procedures
GB/T 37436-2019 Intelligent transportation systems—Extended-range backing aid systems—Performance requirements and test procedures
GB/T 38952-2020 Non-destructive testing—Testing method for measuring residual stress using bulk wave
GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
GB/T 37365-2019 Die casting unit—Performance testing method
GB/T 36986-2018 Dynamic testing methods of brake performance for automobiles
GB/T 40268-2021 Determination of performance on immunomagnetic material
GB/T 39788-2021 System and software engineering—Performance testing method
GB/T 23899-2020 Test and calculation methods of energy consumption for forestry enterprises
GB/T 33260.2-2018 Capability of detection—Part 2: Methodology in the linear calibration case
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 8484-2020 Test method for thermal insulating performance for building exterior doors and windows
GB/T 36230-2018 CNC Straight-side link-drive press—Performance requirements and test methods
GB/T 39283-2020 Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques
GB/T 25217.7-2019 Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress
GB/T 40681.4-2021 Statistical methods in monitoring process capability and performance—Part 4: Process capability estimates and performance measures
GB/T 39282-2020 Non-destructive testing—Testing method for pulse-echo testing using electromagnetic acoustic transducer (EMAT) techniques
GB/T 39751-2021 Energy detection method for equipment manufacturing system—Guideline
GB/T 14218-2018 Electronic lighting control equipment performance parameters and measurement methods

Jilin Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB22/T 397.10-2017 Functional evaluation procedures and testing methods of health care products Part 10: Functional testing methods for aiding physical fatigue relief
DB22/T 397-2014 Functional evaluation procedures and testing methods for health care products
DB22/T 397.8-2017 Functional Evaluation Procedures and Test Methods of Health Products Part 8: Test Methods for Auxiliary Improvement of Microcirculation Function

Guangdong Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB44/T 1210-2013 Detection and Evaluation Method of Energy Consumption in Thermal Power Plants
DB44/T 1665-2015 Method for detecting energy consumption of die casting machine
DB44/T 1209-2013 Energy Efficiency Detection and Evaluation Method for Fan Units
DB44/T 1227-2013 Detection and Evaluation Method of Energy Consumption in Hotel and Tourism Industry
DB44/T 1211-2013 Energy Efficiency Detection and Evaluation Method of Water Pump Unit
DB44/T 1651-2015 Detection and Identification Methods of Banana Bacterial Soft Rot
DB44/T 1853-2016 Method for determination of seaming strength of zipper and bag materials

Professional Standard - Traffic, Detection capabilities and methods

JT/T 885-2014 Safety detecting requirements and methods for commercial semi-trailer
JT/T 340-2009 Measuring and calculating methods for energy balance of marine engine powder plant

Jiangsu Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB32/T 2141-2012 Detection method of oxygenation capacity of microporous aeration and oxygenation equipment
DB32/T 4475-2023 Methods for detection and identification of American shad germplasm

工业和信息化部, Detection capabilities and methods

QB/T 5569-2021 Paper industry energy detection and evaluation method bleaching system
QB/T 5568-2021 Energy detection and evaluation method for papermaking industry cooking system
QB/T 5570-2021 Paper industry energy detection and evaluation method wastewater treatment system
JB/T 13463-2018 Preparation and inspection methods of oblique incidence test blocks for non-destructive testing and ultrasonic testing
JB/T 13247-2018 Low pressure casting machine energy consumption detection method
YD/T 2408-2021 Mobile intelligent terminal security capability testing method
YD/T 3474-2019 Mobile Internet application security hardening capability assessment requirements and testing methods
YD/T 2745-2014 Mobile terminal equipment capability management function testing method
YS/T 3039-2021 Method for determination of mechanical properties of gold mine filling materials
YB/T 4786-2019 Detection and evaluation method of low-grade waste heat in iron and steel enterprises
YD/T 3486-2019 Disaster backup and recovery professional service capability requirements and evaluation methods
QB/T 5623-2021 Energy efficiency monitoring and evaluation methods for panel furniture enterprises

BR-ABNT, Detection capabilities and methods

Professional Standard - Agriculture, Detection capabilities and methods

NY/T 2052-2011 Detection and identification for Acanthoscelides obtectus(Say)
NY/T 2418-2013 Detection and identification of Callosobruchus maculatus (Fabricius)
NY/T 2051-2011 Detection and identification for Bactrocera dorsalis(Hendel)
NY/T 2053-2011 Detection and identification for Bactrocera tsuneonis(Miyake)
NY/T 2286-2012 Detection and identification for Clavibacter michiganensis subsp. michiganensis (Smith) Davis et al.
NY/T 2050-2011 Detection and identification of Peronosclerospora spp.
NY/T 2114-2012 Detection and identification of Phytophthora sojae Kaufmann & Gerdemann
NY/T 2289-2012 Detection and identification of Tilletia controversa Kühn
304药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4003 Determination of glass internal stress
NY/T 2287-2012 Detection and identification for Xanthomonas oryzae pv.oryzicola(Fang et al.)Swings et al.
NY/T 2288-2012 Detection and identification of Cucumber green mottle mosaic virus
306药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4005 Determination of tensile properties
农业农村部公告第283号 Standards for detection methods of monensin residues (trial)

Professional Standard - Petroleum, Detection capabilities and methods

SY/T 6326-1997 The method of measuring and evaluating of the loading capacity on rig derricks
SY/T 5623-1997 Prediction and detection methods of formation pore pressure
SY/T 6326-2008 The method of measurement and evaluation for the loading capacity on derricks and substructure of the drilling rig and working rig
SY/T 5807-2012 Technology method for hydraulic piston pump trip operation and test
SY 5807-2012 Lifting operation and test method of hydraulic piston pump
SY/T 5281-2000 Bottle test method for the demulsification performance of crude oil demulsifiers

Indonesia Standards, Detection capabilities and methods

SNI 03-3432-1994 Code for design flood and over topping capacity determination of dams
SNI 07-4077-1996 Method of tension and impact test for welded metal deposit
SNI 19-6739-2002 Examination methods for type capacity and transmissivitas estimation on tested wells
SNI 08-0365-1989 Test method for breaking strength and elongation of sacks fabrics
SNI 06-0432-1989 Tensile strength and elongation test method of polypropylene
SNI 15-1572-1989 Detergen resistance of glaze, Test method
SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
SNI 05-3316-1994 Mechanical press machines, Test code for performance and accuracy
SNI 0276-2009
SNI 03-6760-2002 Test method for reinforced concrete floor loading at multistoried buildings by water load
SNI 09-1255-1989 Brake lining and brake shoe, Adhesives and bonds test method

未注明发布机构, Detection capabilities and methods

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case

未注明发布机构, Detection capabilities and methods

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Detection capabilities and methods

ASHRAE 207-2021 Laboratory Method of Test of Fault Detection and Diagnosis for Air Economizers

AENOR, Detection capabilities and methods

UNE-EN 14705:2006 Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers

JP-NDIS, Detection capabilities and methods

NDIS 3413-2014 Methods of vision acuity and color vision test for non-destructive testing personnel

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection capabilities and methods

GB/T 33210-2016 Non-destructive testing—Test method for determining residual stresses by electromagnetic technology
GB/T 34222-2017 Determination of the activity of ribonuclease
GB/T 7704-2017 Non-destructive testing—Practice for residual stress measurement by X-ray
GB/T 34801-2017 Determination of the activity of desoxyribonuclease
GB/T 34800-2017 Detection method of activity and impurity of proteinase K
GB/T 34824-2017 The test method of wind load resistance performance for screens of windows and doors
GB/T 35382-2017 Test methods for energy consumption of blow moulding machines for plastics
GB/T 33580-2017 Testing and measuring methods of energy consumption for rubber and plastics extruder

Professional Standard - Machinery, Detection capabilities and methods

JB/T 6580.2-1999 Open press Performance requirement and test method
JB/T 12562-2015 Low pressure die-casting machine.Testing methods of technology capability
JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
JB/T 12607-2016 Inspection methods for performance parameters of superhard tools material
JB/T 12613-2016 Inspection methods for performance parameters of ceramic tools material
JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
JB/T 6580.2-2014 Open front mechanical power press.Part 2: Performance requirement and testing methods
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 12615-2016 Residual stress testing methods for cemented carbide cutting tool
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 10059-1999 Modeling method for testing machines and non-destructive testing instruments
JB/T 7667-1995 In-service pressure vessels acoustic emission inspection and assessment method
JB/T 12612-2016 Inspection methods for cutting tool coating material performance

Professional Standard - Ocean, Detection capabilities and methods

HY/T 269-2018 Testing method of ocean pressure measuring instrument

Professional Standard - Commodity Inspection, Detection capabilities and methods

SN/T 2990-2011 Quality control and quality evaluation. Index evaluation method of process and ability in testing laboratory

GOSTR, Detection capabilities and methods

GOST R ISO 11843-7-2020 Statistical methods. Capability of detection. Part 7. Methods of an estimation taking into account background noise
GOST 13904-2019 Glass packing. Methods of testing the resistance to internal hydrostatic pressure

YU-JUS, Detection capabilities and methods

JUS B.C8.042-1981 Building Ume. Methods of physical and mechinical testing

国家市场监督管理总局, Detection capabilities and methods

RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions
RB/T 033-2020 Guidelines for Validation and Validation of Microbiological Test Methods
RB/T 032-2020 Gene Amplification Test Method Validation and Validation Guide

Chongqing Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB50/T 04-2016 Energy-saving monitoring method of thermal pipeline

Professional Standard - Light Industry, Detection capabilities and methods

QB/T 2127-2022 Detection and Calculation Method of Thermal Performance Index of Color Baked Kundao Kiln for Daily-use Ceramics

CU-NC, Detection capabilities and methods

NC 31-13-1987 Rubber. Determination of Abrasion Resistance. Testing Method
NC 29-14-1987 Pesticides. Suspensibility Testing Methods

Professional Standard - Aviation, Detection capabilities and methods

HB 7476-2016 Qualification and Certification of Mechanics Testers for Aeronautical Metals

CZ-CSN, Detection capabilities and methods

CSN 05 1180-1990 Welded joints. The me-thods of visual inspec-tion and measurements

International Telecommunication Union (ITU), Detection capabilities and methods

ITU-T Q.1236 FRENCH-1999 Intelligent Network Capability Set 3 - Management Information Model Requirements and Methodology

Professional Standard-Safe Production, Detection capabilities and methods

AQ 5215-2013 Safety performance testing method for spray booth
AQ/T 5215-2013 Testing method for safety performance of spray booth
AQ 5214-2013 Safety performance test method of drying oven
AQ/T 5214-2013 Testing method for safety performance of drying equipment

Professional Standard - Water Conservancy, Detection capabilities and methods

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

Standard Association of Australia （SAA）, Detection capabilities and methods

AS 2891.13.1:1995 Methods of sampling and testing asphalt - Determination of the resilient modulus of asphalt - Indirect tensile method
AS/NZS 2512.6:1998 Methods of testing protective helmets Method 6: Measurement of horizontal peripheral vision clearance
AS/NZS 2891.3.3:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Pressure filter method

Professional Standard - Post and Telecommunication, Detection capabilities and methods

YD/T 2408-2013 Test methods for security capability of smart mobile terminal
YD/T 2252-2011 Evaluation criteria of service capability for network and information security risk assessment
YD/T 4390-2023

Gansu Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB62/T 4160-2020 On-line detection method for comprehensive performance of in-use vacuum adiabatic cryogenic pressure vessel
DB62/T 2248-2022 Energy Efficiency Test and Evaluation Method for Industrial Heat Exchangers

KR-KS, Detection capabilities and methods

KS Q ISO 11843-7-2019 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 22514-7-2016 Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes

Society of Automotive Engineers (SAE), Detection capabilities and methods

SAE ARP6156-2022 WAM High Speed Load Capacity Test Method

SAE - SAE International, Detection capabilities and methods

SAE ARP6156-2017 WAM High Speed Load Capacity Test Method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Detection capabilities and methods

ASHRAE CH-99-18-1999 Symposium on Fault Detection and Diagnostic (FDD) Methods and Evaluation Techniques

农业农村部, Detection capabilities and methods

NY/T 2288-2021 Quarantine detection and identification methods of cucumber green mottled mosaic virus

NL-NEN, Detection capabilities and methods

NEN 881-1970 Requirements and test methods for red lead pigments
NEN 878-1969 Requirements and test methods for pigments. White lead
NEN 879-1969 Requirements and test methods for pigments. Lithopone
NEN 6691-1988 Sludge - Determination of dewaterability by the MFT-method

中国民用航空局, Detection capabilities and methods

MH/T 1067-2018 Helicopter spraying quality indicators and detection methods

American National Standards Institute （ANSI), Detection capabilities and methods

ANSI/ASHRAE 105 Addendum b-2012 Standard Methods of Measuring and Expressing Building Energy Performance
ANSI/ASHRAE 105 Addendum a-2011 Standard Methods of Measuring and Expressing Building Energy Performance
ANSI/ASTM F1964:2021 Standard Test Method for Performance of Pressure Fryers
ANSI/ASTM F2126:2006 TEST METHOD FOR TREESTAND STATIC LOAD CAPACITY

Professional Standard - Electricity, Detection capabilities and methods

DL/T 1715-2017 Ultrasonic testing method and quality classification of butt joints of aluminum and aluminum alloy power equipment

Professional Standard - Construction Industry, Detection capabilities and methods

JG/T 440-2014 Test method for shading performance of windows and doors
JG/T 192-2006 Test method for repeated opening and closing performance of windows and doors

国家质量监督检验检疫总局, Detection capabilities and methods

SN/T 3253.3-2016 Testing methods for performance of sanitary ceramics Part 3: Testing method for maximum flushing function
SN/T 3340-2012 Test method for nickel release from clothing accessories in contact with skin

Tianjin Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB12/T 051.20-2003 Energy Saving Monitoring Method for Drying Kiln and Baking Furnace
DB12/T 603-2015 Test method for flammability of infant clothing

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Detection capabilities and methods

IPC TM-650 2.4-1998 Mechanical Test Methods Revision R

PL-PKN, Detection capabilities and methods

PN E04410-24-1986 Electroinsulating varnishes Test methods Testing of mechanical properties
PN E04063-13-1987 On-load tap-changers Test methods Check of function

Professional Standard - Navy, Detection capabilities and methods

HJB 449.15-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 15:Fuel and motive force cabin electric function examination

Taiwan Provincial Standard of the People's Republic of China, Detection capabilities and methods

CNS 13306-2-4-2007 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)

Professional Standard - Electron, Detection capabilities and methods

SJ 20135-1992 Vibration monitoring and mechanical fault diagnosis for electronic equipments
SJ/Z 1172-1977 Methods for determination of throwing power of electroplating solution
SJ 20408-1994 Methods of measurement for electric performance of UHF digital radio relay equipment

Anhui Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB34/T 3358-2019 Technical specifications and testing methods for shot blasting of automobile forgings

Jiangxi Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB36/ 789-2014 Ultrasonic guided wave testing method for steel pressure pipelines
DB36/T 789-2023 Ultrasonic guided wave detection method for steel pressure pipelines

Military Standard of the People's Republic of China-General Armament Department, Detection capabilities and methods

GJB 2044-1994 Acoustic emission detection method for titanium alloy pressure vessels
GJB 2044A-2021 Acoustic emission detection method for titanium alloy pressure vessels
GJB 573.3-1988 Fuze environment and performance test methods vacuum-steam-pressure test

European Committee for Standardization (CEN), Detection capabilities and methods

EN 86:1980 Methods of testing windows; Water tightness test under static pressure
EN 993-11:2007 Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
EN 13973:2002 Rigid plastics containers - Method for determination of drainability

American Society for Testing and Materials (ASTM), Detection capabilities and methods

ASTM D7060-12 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D7349/D7349M-15 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
ASTM D429-14e1 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ASTM F1342-91(1996)e2 Standard Test Method for Protective Clothing Material Resistance to Puncture
ASTM F2126-06(2018) Standard Test Method for Treestand Static Load Capacity
ASTM D7060-04 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

中国国家认证认可监督管理委员会, Detection capabilities and methods

RB/T 219-2017 Requirements for Inspection and Testing Institutions’ Qualification Authentication Capability Evaluation and Forensic Appraisal Institutions

Beijing Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB11/T 173-2003 Measyrement and calculation methods of electricity balance for power transformer

国家能源局, Detection capabilities and methods

SY/T 6302-2019 Test method for fracturing proppant conductivity
SY/T 6326-2019 Testing and assessment methods and classification specifications for the bearing capacity of oil drilling rigs and workover rig derricks

Canadian General Standards Board （CGSB), Detection capabilities and methods

CGSB 2.11-94 46.1-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Determination of Surface Tension

Professional Standard - Railway, Detection capabilities and methods

TB/T 2732-1996 Calculation method for contact and bending load capacity of traction gears for internal combustion and electric locomotives

交通运输部, Detection capabilities and methods

JT/T 1265-2019 Tension testing method of prestressed precision-rolled threaded steel bars for bridges
JT/T 1341-2020 Energy consumption detection and calculation method of cutter suction dredger

Professional Standard - Press and Publication, Detection capabilities and methods

CY/T 68-2009 Quality requirements and test methods for optical optical disc lable printing
CY/T 165-2017 Quality requirements and testing methods for digital textbooks for primary and secondary schools

Professional Standard - Forestry, Detection capabilities and methods

LY/T 1926-2010 Antimicrobial wood(bamboo)-based flooring.Test method for antimicrobial function and antimicrobial effect
LY/T 2369-2014 Testing methods for physical and mechanical properties of desert shrub

国家药监局, Detection capabilities and methods

YY/T 1789.3-2022 In vitro diagnostic testing system performance evaluation methods Part 3: Detection limit and quantitation limit

Hebei Provincial Standard of the People's Republic of China, Detection capabilities and methods

DB13/T 1701-2013 Test method for coating adhesion of rail passenger car body

Professional Standard - Textile, Detection capabilities and methods

FZ/T 70015-2022 Measuring method and evaluation of pressure in knitted tights

CN-STDBOOK, Detection capabilities and methods

图书 3-9833 Understanding and Implementation of GB/T 27025-2019 "General Requirements for the Capability of Testing and Calibration Laboratories"

RO-ASRO, Detection capabilities and methods

STAS 6926/12-1970 Motor vehicles. Testing methods DETERMINATION OF BRAKING EFFICIENCY

Professional Standard - Non-ferrous Metal, Detection capabilities and methods

YS/T 120-1992 Energy Balance Test and Calculation Method of Aluminum Electrolyzer

中国有色金属工业总公司, Detection capabilities and methods

YS 120-1992 Aluminum electrolytic cell energy balance testing and calculation method

Lithuanian Standards Office , Detection capabilities and methods

LST EN 13973-2003 Rigid plastics containers - Method for determination of drainability

IN-BIS, Detection capabilities and methods

IS 13988-1994 Automotive vehicles - starting gradeability - method of measurement