ZH
RU
ES
large electron microscope
large electron microscope, Total:328 items.
In the international standard classification, large electron microscope involves: Optical equipment, Optics and optical measurements, Optoelectronics. Laser equipment, Analytical chemistry, Metrology and measurement in general, Vocabularies, Air quality, Welding, brazing and soldering, Education, Electronic component assemblies, Electronic components in general, Testing of metals, Linear and angular measurements, Protection against crime, Thermodynamics and temperature measurements, Technical drawings, Surface treatment and coating, Electronic display devices, Materials for the reinforcement of composites, Construction materials, Raw materials for rubber and plastics, Physics. Chemistry, Integrated circuits. Microelectronics, Iron and steel products, Semiconductor devices, Ceramics, Paints and varnishes, Medical sciences and health care facilities in general, Paper and board, Paint ingredients, Textile fibres.
American Society for Testing and Materials (ASTM), large electron microscope
- ASTM E766-98(2003) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-98 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E1951-02(2007) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E1951-14 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E2090-00 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
- ASTM E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
- ASTM E986-97 Standard Practice for Scanning Electron Microscope Beam Size Characterization
- ASTM E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization
- ASTM E3143-18a Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM E3143-18 Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM E3143-18b Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
- ASTM C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
- ASTM C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
- ASTM D3849-13 Standard Test Method for Carbon Blackmdash;Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM D3849-14 Standard Test Method for Carbon Blackmdash;Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM E986-04 Standard Practice for Scanning Electron Microscope Beam Size Characterization
- ASTM D3849-95a(2000) Standard Test Method for Carbon Black - Primary Aggregate Dimensions from Electron Microscope Image Analysis
- ASTM D3849-07 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM E986-04(2010) Standard Practice for Scanning Electron Microscope Beam Size Characterization
- ASTM D3849-22 Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM E3143-18b(2023) Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM D7201-06(2020) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D3849-02 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM D3849-04 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D7201-06(2011) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM D3849-14a Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D6281-15 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
- ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
- ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
- ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
- ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
- ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
- ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
- ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
- ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
- ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
- ASTM D5756-02(2008) Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
- ASTM D5755-03 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
- ASTM D5755-09 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
- ASTM D5755-09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
- ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
- ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
- ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
- ASTM D6056-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
- ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
- ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
- ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
- ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
- ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
- ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
- ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
- ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
- ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
Professional Standard - Machinery, large electron microscope
Korean Agency for Technology and Standards (KATS), large electron microscope
International Organization for Standardization (ISO), large electron microscope
- ISO 16700:2004 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
- ISO 16700:2016 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
- ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
- ISO/CD 25498:2023 Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope
- ISO 15932:2013 Microbeam analysis.Analytical electron microscopy.Vocabulary
- ISO/CD 19214:2023 Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
- ISO 23729:2022 Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
- ISO 22493:2008 Microbeam analysis - Scanning electron microscopy - Vocabulary
- ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
- ISO 25498:2018 Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
- ISO 19214:2017 Microbeam analysis - Analytical electron microscopy - Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
- ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
- ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
- ISO 9220:1988 Metallic coatings; measurement of coating thickness; scanning electron microscope method
- ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
- ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
- ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
- ISO 10312:1995 Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method
- ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
- ISO 21363:2020 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
- ISO 13794:2019 Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method
- ISO 10312:2019 Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method
- ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
- ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
- ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
- ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- ISO/TS 22292:2021 Nanotechnologies — 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
- ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
- ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
- ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Association Francaise de Normalisation, large electron microscope
- NF X21-005:2006 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification.
- NF ISO 15932:2014 Analyse par microfaisceaux - Microscopie électronique analytique - Vocabulaire
- XP X21-015*XP ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
- XP ISO/TS 24597:2011 Analyse par microfaisceaux - Microscopie électronique à balayage - Méthodes d'évaluation de la netteté d'image
- NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
- NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
- FD T16-209:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
- NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
- NF T25-111-4:1991 Carbon fibres- Texture and structure- Part 4: Fractography by scaning electron microscope
- NF ISO 13794:2020 Air ambiant - Dosage des fibres d'amiante - Méthode par microscopie électronique à transmission par transfert indirect
- NF ISO 10312:2020 Air ambiant - Dosage des fibres d'amiante - Méthode par microscopie électronique à transmission par transfert direct
- NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
- NF EN ISO 19749:2023 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à balayage
- NF EN ISO 21363:2022 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à transmission
- NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
- NF EN 60749-35:2006 Dispositifs à semiconducteurs - Méthodes d'essai climatiques et mécaniques - Partie 35 : microscopie acoustique pour composants électroniques à boîtier plastique
- NF ISO 16000-27:2014 Air intérieur - Partie 27 : détermination de la poussière fibreuse déposée sur les surfaces par MEB (microscopie électronique à balayage) (méthode directe)
- FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
British Standards Institution (BSI), large electron microscope
- BS ISO 16700:2004 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
- BS ISO 25498:2018 Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
- 18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
- BS ISO 16700:2016 Tracked Changes. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
- BS ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
- BS ISO 21466:2019 Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
- BS EN ISO 9220:1989 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- 18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
- BS ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
- PD ISO/TS 10797:2012 Nanotechnologies. Characterization of single-wall carbon nanotubes using transmission electron microscopy
- BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
- 21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- 20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- 21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- 15/30292710 DC BS ISO 19214. Guidelines for growth direction determination of wirelike crystals by transmission electron microscopy
- BS ISO 10312:2019 Ambient air. Determination of asbestos fibres. Direct transfer transmission electron microscopy method
- BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- BS ISO 13794:2019 Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
- BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
- BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
- BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
- PD ISO/TS 22292:2021 Nanotechnologies. 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- BS CECC 00013:1985 Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
- BS PD ISO/TS 22292:2021 Nanotechnologies. 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- 18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- 18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
- 18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
- 19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
- BS EN ISO 17751-2:2023 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Scanning electron microscopy method
- BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- BS EN ISO 17751-2:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Scanning Electron Microscopy method
- 12/30228339 DC BS ISO 16000-27. Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Shanghai Provincial Standard of the People's Republic of China, large electron microscope
- DB31/T 297-2003 Calibration method of magnification of scanning electron microscope
- DB31/T 315-2004 Calibration method of magnification of transmission electron microscope
Professional Standard - Education, large electron microscope
- JY/T 010-1996 General principles of analytical scanning electron microscopy
- JY/T 011-1996 General Principles of Transmission Electron Microscopy
- JY/T 0581-2020 General Rules for Analysis Methods of Transmission Electron Microscopy
- JY/T 0584-2020 General Rules for Analytical Methods of Scanning Electron Microscopy
Japanese Industrial Standards Committee (JISC), large electron microscope
- JIS K 0132:1997 General rules for scanning electron microscopy
- JIS K 0149-1:2008 Microbeam analysis -- Scanning electron microscopy -- Guidelines for calibrating image magnification
- JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
- JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
- JIS K 3850-3:2000 Measuring method for airborne fibrous particles -- Part 3: Indirect-transfer transmission electron microscopy method
- JIS K 3850-2:2000 Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
- JIS R 1633:1998 Sample preparation method of fine ceramics and fine ceramic powders for scanning electron microscope observation
KR-KS, large electron microscope
- KS D ISO 22493-2022 Microbeam analysis —Scanning electron microscopy — Vocabulary
- KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
- KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
- KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
National Metrological Technical Specifications of the People's Republic of China, large electron microscope
- JJF 1916-2021 Calibration Specification for Scanning Electronic Microscopes (SEM)
Group Standards of the People's Republic of China, large electron microscope
National Metrological Verification Regulations of the People's Republic of China, large electron microscope
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, large electron microscope
- GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
- GB/T 34331-2017 Test method of Cucumber green mottle mosaic virus by transmission electron microscopy
- GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
- GB/T 34831-2017 Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High angle annular dark field imaging method
- GB/T 33839-2017 Methods of transmission electron microscope for biological specimen containing carbon nanomaterials involving biological effect
- GB/T 34002-2017 Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, large electron microscope
- GB 7667-1996 The dose of X-rays leakage from electron microscope
- GB 7667-2003 The dose of X-rays leakage from electron microscope
- GB/T 18907-2002 Method of selected area electron diffraction for transmission electron microscopes
- GB/T 18907-2013 Microbeam analysis.Analytical electron microscopy.Selected-area electron diffraction analysis using a transmission electron microscope
- GB/T 21637-2008 Method of morphological identification of coronavirus by using transmission electron microscopy
- GB/T 18295-2001 Analysis method of sandstone sample of petroleum and gas reservoir by scanning electron microscope
- GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
- GB/T 28044-2011 General guide of detection method for nanomaterial biological effect by transmission electron microscope (TEM)
- GB/T 17507-1998 General specification of thin biological standards for X-Ray-Ray EDS microanalysis in electron microscope
- GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
- GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
- GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
- GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
- GB/Z 21738-2008 Fundamental structures of one dimensional nano-materials.High resolution
transmission electron microscopy characterization
- GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
- GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
- GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
- GB/T 2679.11-2008 Paper and board.Qualitative analysis of mineral filler and mineral coating.SEM/EDAX Method
- GB/T 2679.11-1993 Paper and board. Qualitative analysis of mineral filler and mineral coating. SEM/EDAX method
Association of German Mechanical Engineers, large electron microscope
- DVS 2803-1974 Electron-beam welding in microscopy (survey)
- VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
- VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
国家市场监督管理总局、中国国家标准化管理委员会, large electron microscope
- GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
- GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
Institute of Interconnecting and Packaging Electronic Circuits (IPC), large electron microscope
RU-GOST R, large electron microscope
- GOST 21006-1975 Electron microscopes. Terms, definitions and letter symbols
- GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
- GOST R 8.636-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
- GOST 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification
- GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
- GOST ISO 16000-27-2017 Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
- GOST R 8.697-2010 State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope
Professional Standard - Petroleum, large electron microscope
- SY/T 5162-2014 Analytical method of rock sample by scanning electron microscope
- SY/T 5162-1997 Analytical method of rock sample by scanning electron microscope
- SY 5162-2014 Scanning Electron Microscopy Analysis Method for Rock Samples
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, large electron microscope
International Electrotechnical Commission (IEC), large electron microscope
国家能源局, large electron microscope
- SY/T 5162-2021 Scanning electron microscopy analysis method of rock samples
German Institute for Standardization, large electron microscope
- DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
- DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
- DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
- DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
- DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
- DIN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994
- DIN EN 60749-35:2007-03 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006); German version EN 60749-35:2006
- DIN ISO 16000-27:2014-11 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)
工业和信息化部, large electron microscope
- YB/T 4676-2018 Analysis of Precipitated Phases in Steel by Transmission Electron Microscopy
Jiangsu Provincial Standard of the People's Republic of China, large electron microscope
- DB32/T 3459-2018 Scanning Electron Microscopy for Measuring the Micro-area Coverage of Graphene Films
Professional Standard - Judicatory, large electron microscope
SE-SIS, large electron microscope
- SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method
- SIS SS CECC 00013-1985 Basic specification: Scanning electron microscope inspection of semiconductor dice
European Committee for Standardization (CEN), large electron microscope
- EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
- EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
- EN ISO 9220:1994 Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988)
- EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
- prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
- prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
Danish Standards Foundation, large electron microscope
- DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- DS/ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
- DS/ISO/TS 22292:2021 Nanotechnologies – 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- DS/EN 60749-35:2007 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components
- DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ES-UNE, large electron microscope
- UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
- UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
- UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
- UNE-EN 60749-35:2006 Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006) (Endorsed by AENOR in January of 2007.)
Professional Standard - Public Safety Standards, large electron microscope
- GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
- GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
- GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
- GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1520-2018 Forensic science black powder, pyrotechnic powder element composition inspection scanning electron microscope/X-ray energy spectrometry
- GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy
IT-UNI, large electron microscope
- UNI 7604-1976 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microfractography examination.
- UNI 7329-1974 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microstructure examination.
PH-BPS, large electron microscope
- PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
AENOR, large electron microscope
- UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).
- UNE 77236:1999 AMBIENT AIR. DETERMINATION OF ASBESTOS FIBRES. DIRECT-TRANSFER TRANSMISSION ELECTRON MICROSCOPY METHOD.
Lithuanian Standards Office , large electron microscope
- LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
AT-ON, large electron microscope
- OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
- OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, large electron microscope
- GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
- GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
Military Standard of the People's Republic of China-General Armament Department, large electron microscope
- GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
- GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
Defense Logistics Agency, large electron microscope
未注明发布机构, large electron microscope
- BS CECC 13:1985(1999) Harmonized system of quality assessment for electronic components : Basic specification : Scanning electron microscope inspection of semiconductor dice
- DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy
BE-NBN, large electron microscope
- NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)
IPC - Association Connecting Electronics Industries, large electron microscope
- IPC/JEDEC J-STD-035 CD-1999 Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components (Incorporates Amendment 1: January 2007)
American National Standards Institute （ANSI), large electron microscope
- ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
- ANSI/ASTM D6056:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
- ASTM D6281-23 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) (Standard + Redline PDF Bundle)
Professional Standard - Commodity Inspection, large electron microscope
- SN/T 2649.1-2010 Determination of asbestos in cosmetics for import and export.Part 1:X-ray diffraction and scan electron microscopy method
GOSTR, large electron microscope
- PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry
- PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry