ZH
RU
ES

Execution standards and testing basis

Execution standards and testing basis, Total:116 items.

In the international standard classification, Execution standards and testing basis involves: Law. Administration, Applications of information technology, Industrial automation systems, Astronomy. Geodesy. Geography, Metrology and measurement in general, Pipeline components and pipelines, Interface and interconnection equipment, Languages used in information technology, Software development and system documentation, Shipbuilding and marine structures in general, Small craft, Explosion protection, Components and accessories for telecommunications equipment, Rubber and plastics products, Quality, Electromagnetic compatibility (EMC), Electricity. Magnetism. Electrical and magnetic measurements, Acoustics and acoustic measurements, Non-destructive testing, Radiocommunications, Motor cycles and mopeds, Rubber, Water quality.

AASHTO - American Association of State Highway and Transportation Officials, Execution standards and testing basis

PP 57-2006 Standard Practice for Establishing Requirements for and Performing Equipment Calibrations@ Standardizations@ and Checks

The American Road & Transportation Builders Association, Execution standards and testing basis

AASHTO PP 57-2006(R2009) Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Execution standards and testing basis

IEEE 500 P&V-1984 Standard Reliability Data for Pumps and Drivers@ Valve Actuators@ and Valves
IEEE 1451.5-2007 Standard for a Smart Transducer Interface for Sensors and Actuators - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE 1451.3-2003 Standard for a Smart Transducer Interface for Sensors and ActuatorsDigital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
IEEE N42.37-2006 American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Execution standards and testing basis

MSS SP-86-2014 Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators
MSS SP-86-2002 Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Execution standards and testing basis

SP-86-1987 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-1997 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-2002 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-2014 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings@ and Actuators
SP-86-2009 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings@ and Actuators (Includes Errata: July 6@ 2011)

German Institute for Standardization, Execution standards and testing basis

DIN 38402-62:2014-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance (A 62)
DIN EN 14772:2021-03 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560; German version EN 14772:2021
DIN 16568-3:2002 EDIFACT - Standardized message type - Part 3: Syntax and service report message (CONTRL) for implementation based on versions 1, 2 and 3 of the EDIFACT syntax
DIN 38402-62:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance (A 62)

British Standards Institution (BSI), Execution standards and testing basis

BIP 0008-2-2008 Evidential Weight and Legal Admissibility of Information Transferred Electronically - Code of Practice for the Implementation of BS 10008
BIP 0008-2-2014 Evidential Weight and Legal Admissibility of Information Transferred Electronically: Code of Practice for the Implementation of BS 10008
BS PD CEN/TR 15449:2006 Geographic information — Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructure
19/30385556 DC BS EN 14772. Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
BS ISO/IEC 13210:2000 Information technology - Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX standards
BS EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
BS EN 61326-2-5:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
BS ISO 13232-7:2005+A2:2023 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Standardized procedures for performing computer simulations of motorcycle impact tests

Institute of Electrical and Electronics Engineers (IEEE), Execution standards and testing basis

ANSI/IEEE Std 500-1984 IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves (Excerpted from ANSI/IEEE Std 500-1984)
IEEE 500PV-1984 IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves (Excerpted from ANSI/IEEE Std 500-1984)
IEEE Approved Std P1451.5/D10.8, Dec 2006 IEEE Approved Draft Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std 1451.5-2007 IEEE Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE 2003/COR-1999 Information technology - Requirements and guidelines for test methods specifications and test method implementations for measuring conformance to POSIXę standards; Correction
IEEE Approved Std P1451.0/D8.00, Jan 2007 Approved IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std P1451.0/D7.0, Oct 2006 Unapproved IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std P1451.5/D10.7 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std 1451.4-2004 IEEE Standard for A Smart Transducer Interface for Sensors and Actuators--Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std 1451.0-2007 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std P1451.0/D6.04 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std 1451.3-2003 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Digital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
IEEE Std 1451.7-2010 IEEE Standard for Smart Transducer Interface for Sensors and Actuators--Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
IEEE Unapproved Draft Std P1451.7/D1.01, Jan 2009 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
IEEE Std 1451.2-1997 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Transducer to Microprocessor Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE P1451.0/D6, May 2023 IEEE Draft Standard for a Smart Transducer Interface for Sensors, Actuators, Devices, and Systems - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Unapproved Draft Std P1451.7/D1.1, May 2009 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
IEEE Unapproved Draft Std P1451.7/D1.3, Jan 2010 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
IEEE/ISO/IEC 21451-4-2010 ISO/IEC/IEEE Standard for Information technology -- Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC/IEEE 21451-4:2010(E) ISO/IEC/IEEE Standard for Information technology -- Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC/IEEE P21451-7, April 2011 IEEE/ISO/IEC Draft Standard for Information Technology - Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
IEEE/ISO/IEC 21451-2-2010 ISO/IEC/IEEE International Standard for Information technology -- Smart transducer interface for sensors and actuators -- Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC/IEEE 21451-2:2010(E) ISO/IEC/IEEE International Standard for Information technology -- Smart transducer interface for sensors and actuators -- Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats

Japanese Industrial Standards Committee (JISC), Execution standards and testing basis

JIS B 3700-22:2000 Industrial automation systems and integration -- Product data representation and exchange -- Part 22: Implementation methods: Standard data access interface

US-CFR-file, Execution standards and testing basis

CFR 14-16.227-2013 Aeronautics and Space. Part16:Rules of practice for federally-assisted airport enforcement proceedings. Section16.227:Standard of proof.
CFR 12-4.14-2014 Banks and Banking. Part4:Organization and functions, availability and release of information,contracting outreach program,post-employment restrictions for senior examiners. SubpartB:Availability of information under the freedom of information act. Section

American Society for Testing and Materials (ASTM), Execution standards and testing basis

ASTM D7510-10(2016)e1 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
ASTM F1321-13 Standard Guide for Conducting a Stability Test lpar;Lightweight Survey and Inclining Experimentrpar; to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
ASTM D7782-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM D7783-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM F3052-14 Standard Guide for Conducting Small Boat Stability Test 40;Deadweight Survey and Air Inclining Experiment41; to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
ASTM E2520-15 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
ASTM E2520-21 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
ASTM F1321-14 Standard Guide for Conducting a Stability Test 40;Lightweight Survey and Inclining Experiment41; to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
ASTM D7310-07 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
ASTM D7310-11 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
ASTM E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
ASTM E1211/E1211M-17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM F1469-11 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
ASTM D7050-04(2019) Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties

Danish Standards Foundation, Execution standards and testing basis

DS/EN 14772:2005 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
DS/EN 14772:2021 Flanges and their joints – Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

Lithuanian Standards Office , Execution standards and testing basis

LST EN 14772-2005 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
LST EN 14772-2021 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

Association Francaise de Normalisation, Execution standards and testing basis

NF E29-904:2021 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
NF C93-587-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords.

AT-ON, Execution standards and testing basis

OENORM EN 14772-2021 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

IT-UNI, Execution standards and testing basis

UNI EN 14772-2021 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

PL-PKN, Execution standards and testing basis

PN-EN 14772-2021-06 E Flanges and their joints -- Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

ES-UNE, Execution standards and testing basis

UNE-EN 14772:2022 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
UNE 135903:2020 IN Urban road equipment. Road markings for pedestrian crossings and elevated pedestrian crossings. Guide for testing according to the UNE-EN 1436 standard and recommended minimum requirements.

AENOR, Execution standards and testing basis

UNE-EN 14772:2005 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

National Fire Protection Association (NFPA), Execution standards and testing basis

NFPA 1730-2016 Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations to the Public (Effective Date: 6/15/2015)

EU/EC - European Union/Commission Legislative Documents, Execution standards and testing basis

2001/C 202/06-2001 Commission communication in the framework of the implementation of Council Directive 89/106/EEC (Text with EEA relevance; Publication of titles and references of harmonised standards under the Directive)
2012/C 59/04-2012 Commission communication in the framework of the implementation of Directive 2001/95/EC of the European Parliament and of the Council on general product safety (Text with EEA relevance; Publication of titles and references of European standards under the
2013/C 254/03-2013 Commission communication in the framework of the implementation of Directive 2001/95/EC of the European Parliament and of the Council on general product safety (Text with EEA relevance; Publication of titles and references of European standards under the
2016/C 249/05 CORR-2016 Corrigendum to Commission communication in the framework of the implementation of Directive 98/79/EC of the European Parliament and of the Council on in vitro diagnostic medical devices (Publication of titles and references of harmonised standards under U
2016/C 173/03-2016 Commission communication in the framework of the implementation of Council Directive 93/42/ EEC concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under Union harmonisation legislation)
2012/C 262/02-2012 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under the directive)

Professional Standard - Agriculture, Execution standards and testing basis

农业农村部公告第327号 Ketoprofen Allowable Daily Intake and Maximum Residue Limit Standards (Trial) and Residue Detection Method Standards (Trial)

SE-SIS, Execution standards and testing basis

SIS SEN 85 02 00-1973 Dafa processing. Character sets and codes for information interchange and their implemen- tation on various data media. International recommendations' validity as Swedish standard

IX-EU/EC, Execution standards and testing basis

93/42/EEC-2009 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under the directive)
M 109-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON FIRE ALARM/DETECTION, FIXED FIREFIGHTING, FIRE AND SMOKE CONTROL AND EXPLOSION SUPPRESSION PRODUCTS
2008/C 304/06-2008 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC concerning medical devices
M 404-2007 STANDARDISATION MANDATE TO CEN, CENELEC AND ETSI FOR HARMONISED STANDARDS ACCORDING TO THE ELECTRO MAGNETIC COMPATIBILITY (EMC) DIRECTIVE 2004/108/EC
M 046-1994 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD REFRIGERATORS AND FREEZERS
2012/C 218/08-2012 Commission communication in the framework of the implementation of the Directive 2004/22/EC of the European Parliament and of the Council on measuring instruments (Text with EEA relevance; Publication of titles and references of harmonised standards under
M 379-2006 STANDARDISATION MANDATE GIVEN TO THE EUROPEAN COMMITTEE FOR STANDARDISATION (CEN) UNDER EC DIRECTIVE 98/37/EC RELATING TO MACHINERY WITH A VIEW TO REVISION OF STANDARD EN ISO 14122-4:2004 " Safety of machinery - Permanent means of access to machinery - Pa
2015/C 087/02-2015 Commission communication in the framework of the implementation of Directive 2009/48/ EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (Publication of titles and references of harmonised standards under Union harmonis
2015/C 014/03-2015 Commission communication in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety (Publication of titles and references of European standards under the di
2008/C 304/05-2008 Commission communication in the framework of the implementation of the Directive 98/79/EC of the European Parliament and of the Council on in vitro diagnostic medical devices
2012/C 123/02-2012 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under the directive)
2013/C 22/02-2013 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under the directive)

AWS - American Welding Society, Execution standards and testing basis

A9.2-1992 Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases
A9.1-1992 Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases

European Committee for Standardization (CEN), Execution standards and testing basis

CEN/CLC Guide 18:2010 Execution of Specific Agreements issued to CEN and CENELEC in accordance with the EC and EFTA Framework Partnership Agreements 2009 (FPA 2009) covering the tasks to be assigned to CEN and CENELEC relating to European standardization

Korean Agency for Technology and Standards (KATS), Execution standards and testing basis

KS B ISO 10303-27:2005 Industrial automation systems and integration-Product data representation and exchange-Part 27:Implementation methods:JavaTM programming language binding to the standard data access interface with Internet/Intranet extensions

ZA-SANS, Execution standards and testing basis

SANS 22971:2010 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

Aerospace, Security and Defence Industries Association of Europe (ASD), Execution standards and testing basis

ASD-STAN TR 4666-2016 Aerospace series Aircraft integrated air quality and pressure standards, criteria and determination methods (Edition 1)

American Welding Society (AWS), Execution standards and testing basis

WRC 257:1980 Analysis of the Ultrasonic Examinations of PVRC Weld Specimens 155, 202, and 203 by Standard and Two-Point Coincidence Methods

International Electrotechnical Commission (IEC), Execution standards and testing basis

IEC 61326-2-5:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 617

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Execution standards and testing basis

ITU-R SA.514-2-1994 Interference Criteria for Command and Data Transmission Systems Operating in the Earth Exploration-Satellite and Meteorological-Satellite Services

International Telecommunication Union (ITU), Execution standards and testing basis

ITU-R SA.514-3 FRENCH-1997 INTERFERENCE CRITERIA FOR COMMAND AND DATA TRANSMISSION SYSTEMS OPERATING IN THE EARTH EXPLORATION-SATELLITE AND METEOROLOGICAL-SATELLITE SERVICES
ITU-R SA.514-3 SPANISH-1997 INTERFERENCE CRITERIA FOR COMMAND AND DATA TRANSMISSION SYSTEMS OPERATING IN THE EARTH EXPLORATION-SATELLITE AND METEOROLOGICAL-SATELLITE SERVICES
ITU-R M.1739-2006 Protection criteria for wireless access systems including radio local area networks operating in the mobile service in accordance with Resolution 229 (WRC-03) in the bands 5 150-5 250 MHz 5 250-5 350 MHz and 5 470-5 725 MHz
ITU-R SA.514-1997 Interference criteria for command and data transmission systems operating in the Earth exploration-satellite and meteorological-satellite services

Underwriters Laboratories (UL), Execution standards and testing basis

UL 60691 CRD-2008 UL Standard for Safety Thermal-Links – Requirements and Application Guide - Section / Paragraph Reference: Section 7 Subject: Method to perform the Marking test (Edition 3: September 26@ 2003)

WRC - Welding Research Council, Execution standards and testing basis

BULLETIN 257-1980 ANALYSIS OF THE ULTRASONIC EXAMINATIONS OF PVRC WELD SPECIMENS 155@ 202@ AND 203 BY STANDARD AND TWO-POINT COINCIDENCE METHODS

RU-GOST R, Execution standards and testing basis

GOST 21397-1981 Non-destructive testing. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Specifications

ANSI - American National Standards Institute, Execution standards and testing basis

X3.16-1976 Character Structure and Character Parity Sense for Serial-by-Bit Data Communication in the American National Standard Code for Information Interchange