ZH
RU
ES

Countersink classification

Countersink classification, Total:162 items.

In the international standard classification, Countersink classification involves: Fasteners for aerospace construction, Cutting tools, Fasteners, Commercial vehicles, Earth-moving machinery, Agricultural machines, implements and equipment, Medical equipment, Machine tool systems, Manufacturing forming processes, Vocabularies, Hand-held tools, Chipless working equipment, Protective equipment, Characteristics and design of machines, apparatus, equipment.

SE-SIS, Countersink classification

SIS SS-EN 2752-1989 Aerospace series — Nuts, anchor, self locking fixed, two lug, reducedseries, with counterbore — Classification: 1100 MPa/235 degree C
SIS SMS 1743-1974 Circular areas, counterbores and countersinks. ISO inch threaded screws and nuts
SIS SMS 2173-1974 Circular areas, counterbores and countersinks. ISO metric threaded screws and nuts. Tapping screws
SIS SS 2173-1988 Diameters of spot facings, counterbores and countersinks - MScrews and nuts with ISO metric screw threads and tapping screws

IN-BIS, Countersink classification

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Countersink classification

PREN 3843-1993 Aerospace Series Nuts@ Bi-Hexagonal@ Self-Locking@ with Counterbore@ in Heat Resisting Steel@ Passivated Classification: 1 100 MPa (at Ambient Temperature)/650 Degrees C (Edition P 1)
PREN 3843-1999 Aerospace Series Nuts@ Bihexagonal@ Self-Locking@ with Counterbore@ in Heat Resisting Steel@ Passivated Classification: 1 100 MPa (at Ambient Temperature)/650 Degrees C (Edition P 2)
PREN 3714-2010 Aerospace series Nuts@ anchor@ self-locking@ floating@ two lug@ with counterbore@ in heat resisting steel@ silver plated Classification : 1 100 MPa (at ambient temperature) / 425 °C (Edition P2)
PREN 3754-2009 Aerospace series Nuts@ anchor@ self-locking@ fixed@ 60 degrees corner@ with counterbore@ in heat resisting steel@ MoS2 lubricated Classification : 1 100 MPa (at ambient temperature) / 315 degree C (Edition P 1)
PREN 3712-1989 Aerospace Series Nuts@ Anchor@ Self-Locking@ One Lug@ Fixed@ Reduced Series@ with Counterbore@ in Steel@ Cadmium Plated@ MoS2 Lubricated Classification : 1100 MPa (at Ambient Temperature)/235 Degrees C (Edition 1)
PREN 3712-1991 Aerospace Series Nuts@ Anchor@ Self-Locking@ One Lug@ Fixed@ Reduced Series@ with Counterbore@ in Steel@ Cadmium Plated@ MoS2 Lubricated Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C (Issue P 1)
PREN 3751-1996 Aerospace Series Nuts@ Anchor@ Self-Locking@ Fixed@ Closed Corner@ Reduced Series@ with Counterbore@ in Heat Resisting Steel@ MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/315 Degrees C (Edition P 2)
PREN 3753-1993 Aerospace Series Nuts@ Anchor@ Self-Locking@ Fixed@ 60 Degree Corner@ with Counterbore@ in Alloy Steel@ Cadmium Plated@ MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature)/235 Degrees C (Edition P 1; Corrigendum)
PREN 2881-1998 Aerospace Series Nuts@ Anchor@ Self-Locking@ Fuel Resistant@ Sealing@ Floating@ Two Lug@ With Counterbore@ in Corrosion Resisting Steel@ Passivated@ MoS2 Lubricated Classification: 900 MPa (At Ambient Temperature) / 120 Degrees C (Edition P 1)
PREN 2879-1998 Aerospace Series Nuts@ Anchor@ Self-Locking@ Fuel Resistant@ Sealing@ Floating@ Two Lug@ With Counterbore@ in Corrosion Resisting Steel@ Passivated@ MoS2 Lubricated Classification: 900 MPa (At Ambient Temperature) / 235 Degrees C (Edition P 1)

Association Francaise de Normalisation, Countersink classification

NF L24-556*NF EN 3843:2011 Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature)/650 oC
NF L24-154:2010 Aerospace series - Screws 100 o countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-154*NF EN 4162:2016 Aerospace series - Screws 100o countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF EN 3712:2008 Série aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série réduite, avec chambrage, en acier cadmié, lubrifié MoS2 - Classification : 1100 MPa (à température ambiante)/235oC
NF EN 4269:2023 Série aérospatiale - Écrous à river, à freinage interne, flottants, double patte, série réduite, avec chambrage, en acier, cadmiés, lubrifiés au MoS2 - Classification: 1 100 MPa (à température ambiante)/235 oC
NF EN 2880+AC:2019 Série aérospatiale - Écrous à river, à freinage interne, étanches au carburant, flottants, double patte, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante) / 120 oC
NF L24-486*NF EN 3753:2010 Aerospace series - Nuts, anchor, self-locking, fixed, 60 o corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF EN 4126:2010 Série aérospatiale - Écrous à river, à freinage interne, flottants, double patte, série reduite, avec chambrage très profond, en acier résistant à chaud, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante)/315 oC
NF E66-243:2010 Fraises coniques 2 tailles à entraînement par clavette
NF ISO 4206:2017 Outils à lamer, à queue cylindrique et pilote fixe
NF E66-023*NF ISO 4205:2017 Countersinks, 90o, with parallel shanks and solid pilots
NF ISO 9269:1989 Implants chirurgicaux - Plaques métalliques pour os - Chambrages et alésages pour vis à embase conique.
NF E66-025*NF ISO 4204:2017 Countersinks, 90o, with Morse taper shanks and detachable pilots
NF L20-028*NF EN 3782:2008 Aerospace series - Holes for 100o countersunk head screws - Design standard
NF E66-250*NF ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
NF EN 2414:2019 Série aérospatiale - Rondelles, chanfreinées, avec chambrage, en acier allié, cadmiées

European Committee for Standardization (CEN), Countersink classification

EN 3843:2010 Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 650 °C
EN 3768:2012 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
EN 3539:2010 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration accordance with ISO 7721 (ISO 15065:2005)
EN 3782:2008 Aerospace series - Holes for 100?countersunk head screws - Design standard

British Standards Institution (BSI), Countersink classification

BS EN 3843:2010 Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650°C
BS 4185-13:1985 Machine tool components - Specification for dimensions of counterbored holes
BS EN 3768:2012 Aerospace series. Nuts. anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2lubricated. Classification: 1100 MPa (at ambient temperature)/315 °C
BS EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS EN 3782:2008 Aerospace series - Holes for 100 ° countersunk head screws - Design standard
BS 2A 260-2A 265:2010 Aerospace series. Specification for pan and 100° countersunk slotted head screws with ISO metric screw threads

RO-ASRO, Countersink classification

STAS 5782-1973 COUNTERSINKS FORCOEA TER-SUNKHEAD SCREWS
STAS 4141-1974 TAPER SHANK GOUNTERBORES Dimensions
STAS 11574-1983 COUNTERSINKS FOR FASTENERS
STAS R 9176-1972 COUNTERSINKS Geometrical parameters of cutting edge
STAS 8155/2-1978 Countersinks REMOVABLE GUIDE PIN Dimensions
STAS 5606-1980 Precision screws TIIRRADFD PUT, WITII HEXAGON SOCKHT AND COU.AR Sizes
STAS 1257-1980 Steel rivets HALF-COUNTERSUNTK SMALL RIVET Dimensions
STAS 1474-1986 FLAT COUNTERSUNK AND NIB BOLT C making class
STAS 1477-1980 Black bolts FLAT COUNTERSUNK SQUARE NECK BOLT Dimensions
STAS 8155/1-1978 COUNTERSINK WITH TAPER SHANK AND REMOVABLE GUIDE PIX Dimensions
STAS 8155/3-1985 COUNTERSINK WITH DETACH ABLE TENON AND PIN DRIVE Dimensions
STAS 1367/1-1978 PARALLEL SHANK COUNTERSINKS FOR ANGLES 60°, 90° AND 120°

PL-PKN, Countersink classification

PN M59750-1975 Countersinks
PN M82068-1987 Counterbores for countersunk head screws

Korean Agency for Technology and Standards (KATS), Countersink classification

KS B 3501-2002 Countersinks
KS B 3503-2012(2022) Machine screw counterbores and countersinks
KS P ISO 9714-1:2017 Orthopaedic drilling instruments－Part 1：Drill bits, taps and countersink cutters
KS B ISO 273-2010(2020) Diameter of clearance holes and counterbores for bolts and screws

CZ-CSN, Countersink classification

CSN 22 1608-1976 Countersinks and counterbores. Pilots for counterbores
CSN 02 1022-1988 Countersink for slotted countersunk head screws
CSN 22 1655-1976 Countersinks and counterbores. Counterbore tools
CSN 02 1023-1988 Shoulder countersink for slotted counter-sunk hcad screws
CSN 02 1024-1973 Countorboriug for cheese head serews
CSN 22 1601-1985 Countersinks and counterbores. Technical specifications
CSN 22 1605-1989 Countersinks. Countersinking bits with parallel shanks and solid pilot
CSN 22 1604-1976 Countersinks and counterbores. Counterbores with parallel shank and solid pilot
CSN 22 1607-1989 Countersinks.Ccountersinking bits with morse taper shanks and solid pilot
CSN 22 1627-1978 Countersinks and counterbores. Parallel shank countersinks for 60, 90 and 120 degrees angles. Basic dimensions
CSN 22 1628-1978 Countersinks and counterbores. Morse taper shank countersinks for 60, 90 and 120 degrees angles. Basic dimensions

CH-SNV, Countersink classification

German Institute for Standardization, Countersink classification

DIN 334:2007-12 Countersinks 60°
DIN 1863:1962-01 Countersinks for Countersunk Head Rivets
DIN 2173:2008-03 Countersinks and counterbores, tools with pilot and shank - Technical specifications
DIN 6446:2022 Wood bits - Rose bits (countersinks)
DIN 6446:2022-01 Wood bits - Rose bits (countersinks)
DIN 347:1962-03 Countersinks with 120° Point Angle
DIN 1868:1975-08 Detachable Pilots for Counterbores and Countersinks
DIN 34823:2005 Raised countersunk head screws with 12 point socket
DIN 1866:2007-12 Countersinks 90°, with parallel shank solid pilot
DIN EN 3843:2011 Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 3843:2010
DIN 2173:2007 Countersinks and counterbores, tools with pilot and shank - Technical specifications
DIN 8589-2:2003 Manufacturing processes chip removal - Part 2: Drilling, countersinking and counterboring, reaming; Classification, subdivision, terms and definitions
DIN EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
DIN EN ISO 15065:2005-05 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
DIN 74:2003 Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721
DIN 8375:2006-11 Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
DIN 1867:2007-12 Countersinks 90°, with Morse taper shank and detachable pilot
DIN EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard; German and English version EN 3782:2008
DIN 4000-81:2009 Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges
DIN EN ISO 14581:2014 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013); German version EN ISO 14581:2013

U.S. Air Force, Countersink classification

AIR FORCE A-A-58076-1996 CUTTER, COUNTERSINKS
AIR FORCE A-A-58075 VALID NOTICE 1-2012 Holder: Countersink, Adjustable Micrometer Stop

AT-ON, Countersink classification

ONORM M 1807 Teil.1-1982 Countersinks for countersunk head screws
ONORM M 1807 Teil.3-1975 Counterbores for hexagon bolts and nuts
ONORM M 1807 Teil.2-1982 Counterbores for hexagon socket head screws and slotted cheese head screws

United States Navy, Countersink classification

NAVY AN425 REV 2-1943 RIVET - 78 DEG. COUNTERSUNK HEAD
NAVY AN367 REV 2 VALID NOTICE 1-1989 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY AN367 REV 2-1949 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY MIL-G-85613 VALID NOTICE 1-1991 GROMMET, HARD SEAT, SWAGED, COUNTERSINK; GENERAL SPECIFICATION FOR
NAVY MIL-G-85613-1983 GROMMET, HARD SEAT, SWAGED, COUNTERSINK; GENERAL SPECIFICATION FOR

RU-GOST R, Countersink classification

GOST 14953-1980 Taper countersinks. Specifications
GOST 18750-1980 Countersunk stops with a twist spring hole. Design and dimensions

SAE - SAE International, Countersink classification

SAE AS3565A-2016 WASHER@ FLAT@ COUNTERSUNK UNS S66286
SAE AS3228A-1996 Rivet - Tubular@ Countersunk@ AS 7228
SAE AS125851 THRU AS125875C-2014 PLUG - PIPE@ CADMIUM PLATED@ STEEL UNS G87400@ COUNTERSUNK HEX
SAE AS3230B-2015 RIVET - TUBULAR@ COUNTERSUNK@ CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N06600)

Defense Logistics Agency, Countersink classification

DLA MS27129 REV D-2012 WASHER, FINISHING - COUNTERSUNK

Society of Automotive Engineers (SAE), Countersink classification

SAE AS3230A-2012 RIVET - TUBULAR, COUNTERSUNK, AS7232
SAE AS3228B-2019 RIVET - TUBULAR, COUNTERSUNK, AS7228
SAE J740-2006 Countersunk Square Holes for Cutting Edges and End Bits
SAE AS3228A-2012 RIVET – TUBULAR, COUNTERSUNK, AS7228
SAE AS3230-2011 RIVET - TUBULAR, COUNTERSUNK, AMS 7232
SAE AS3228-2011 RIVET -TUBULAR, COUNTERSUNK, AMS 7228
SAE AS125851-1959 PLUG - PIPE, STEEL, COUNTERSUNK HEX
SAE AS125851A-2006 PLUG - PIPE, STEEL, COUNTERSUNK HEX
SAE AS125851B-2007 PLUG - PIPE, CADMIUM PLATED, STEEL UNS G87400, COUNTERSUNK HEX
SAE AS3230A-1996 Rivet - Tubular, Countersunk, AS 7232 FSC 5320
SAE J740-2011 Countersunk Square Holes for Cutting Edges and End Bits
SAE J1580-2011 Metric Countersunk Holes for Cutting Edges and End Bits
SAE AS9768-2019 WASHER, FLAT, COUNTERSUNK CORROSION AND HEAT RESISTANT STEEL (UNS S66286)
SAE AS9482-2007 WASHER, FLAT - STEEL AMS 6437 OR AMS 6485, DIFFUSED NICKEL-CADMIUM PLATED, COUNTERSUNK
SAE AS9482A-2011 Washer, Flat Steel AMS 6437 or AMS 6485, Diffused Nickel-Cadium Plated, Countersunk
SAE AS9482B-2012 Washer, Flat Steel AMS 6437 or AMS 6485, Diffused Nickel-Cadium Plated, Countersunk

(U.S.) Ford Automotive Standards, Countersink classification

FORD W-GD3-1999 CENTER/COUNTERSINK GAUGE-BARREL TYPE

Japanese Industrial Standards Committee (JISC), Countersink classification

JIS B 4236:1998 Milling cutters -- Counterbores for hexagon socket head bolts
JIS B 4236 AMD 1:2009 Milling cutters -- Counterbores for hexagon socket head bolts (Amendment 1)
JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and screws

Aerospace Industries Association/ANSI Aerospace Standards, Countersink classification

AIA/NAS NAS500-2011 SPACER, NUT, PLATE, COUNTERSUNK Rev 9
AIA/NAS NAS 1794-2003 Nut - Self-Locking, Counterbore Replaceable Element Rev 2; FSC 5310
AIA/NAS NAS500-2014 SPACER, NUT, PLATE, COUNTERSUNK (Rev 10)
AIA/NAS NASM24661-1999 Rivet, Blind-Countersunk Head, Drive Type
AIA/NAS NASM35791-1999 Handle, Bail-Chest, Surface Mounting Countersunk Holes
AIA/NAS NASM24662-2002 Rivet, Blind - Universal Head, Drive Type Rev 1
AIA/NAS NASM20426-2009 RIVET, SOLID, COUNTERSUNK 100? PRECISION HEAD, ALUMINUM AND TITANIUM COLUMBIUM ALLOY Rev 2
AIA/NAS NASM63540/1-2000 Stud, Self-Locking, Flush Head, Ribbed Clinch Type
AIA/NAS NASM63540/3-2000 Stud, Self-Clinching, Flush Head, Hex Clinch Type

AIA/NAS - Aerospace Industries Association of America Inc., Countersink classification

NAS500-1992 Nut Spacer@ Plate - Countersunk (Rev 8)
NAS500-1973 Nut Spacer@ Plate - Countersunk (Rev 7)
NAS500-1951 Shim Anchor Nut - Countersunk (Rev 1)

KR-KS, Countersink classification

KS P ISO 9714-1-2017 Orthopaedic drilling instruments－Part 1：Drill bits, taps and countersink cutters
KS P ISO 9714-1-2017(2022) Orthopaedic drilling instruments－Part 1：Drill bits, taps and countersink cutters

VN-TCVN, Countersink classification

TCVN 3059-1988 Carbide tipped counter bores.Technical requirements

Danish Standards Foundation, Countersink classification

DS/EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

Aerospace Industries Association, Countersink classification

AIA NAS 500-1992 Nut Spacer, Plate - Countersunk (Rev. 8)

Lithuanian Standards Office , Countersink classification

LST EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)

未注明发布机构, Countersink classification

BS EN ISO 15065:2005(2008) Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

AENOR, Countersink classification

UNE-EN ISO 15065:2008 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)

NO-SN, Countersink classification

NS 2673-1984 Aluminium/steel bolted joints - Countersunk and collar chloroprene rubber ferrules
NS 5341-1977 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
NS 5340-1977 Morse taper shank countersinks for angles 60, 90 and 120 degrees inclusive

European Association of Aerospace Industries, Countersink classification

AECMA PREN 2998-1986 Aerospace Series Washers Countersunk Heat Resisting Steel Issue P 1

Aerospace, Security and Defence Industries Association of Europe (ASD), Countersink classification

ASD-STAN PREN 6094-2007 Aerospace series Washer, spring, countersunk (Edition P 2)

IT-UNI, Countersink classification

UNI 1722-1724-1941

CEN - European Committee for Standardization, Countersink classification

EN 2414:2019 Aerospace series - Washers@ chamfered@ with counterbore@ in alloy steel@ cadmium plated

YU-JUS, Countersink classification

JUS K.R1.122-1994 Core drilling equipment - Core barrel - Type Z - Head