ZH
RU
ES

Standard coating weight

Standard coating weight, Total:330 items.

In the international standard classification, Standard coating weight involves: Surface treatment and coating, Iron and steel products, Aerospace electric equipment and systems, Electrical wires and cables, Linear and angular measurements, Paints and varnishes, Analytical chemistry, Fasteners, Paint ingredients, Air quality, Testing of metals, Non-ferrous metals, Plastics, Measurement of volume, mass, density, viscosity, Conducting materials, Hydraulic fluids, General methods of tests and analysis for food products, Optics and optical measurements, Acoustics and acoustic measurements, Metalliferous minerals, Rubber and plastics products, Wastes, Small craft, Microbiology, Products of the chemical industry, Materials for aerospace construction, Tyres.

The American Road & Transportation Builders Association, Standard coating weight

AASHTO T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 65M/T 65-1997 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings HM-22; Part IIA; ASTM Designation A 90/A 90M-95a R(2001)
AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
AASHTO T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles HM-22; Part IIB; ASTM Designation A 428/A 428M-95 R(2001)

American Society for Testing and Materials (ASTM), Standard coating weight

ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM A630-03(2014) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A428/A428M-10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM B137-95(2000) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B137-95(2021) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM A428/A428M-10(2019) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A428/A428M-21 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A309-94a(1999) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01(2007) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM D3708-88(1993)e1 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
ASTM A309-01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A385/A385M-11 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385/A385M-15 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A879/A879M-12 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A879/A879M-12(2017) Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM E1659-05 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM F2217/F2217M-13(2018) Standard Practice for Coating/Adhesive Weight Determination
ASTM B636-84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A385/A385M-09 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A917-05 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A917-06a Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A917-06 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination
ASTM F2217-02 Standard Practice for Coating/Adhesive Weight Determination
ASTM A385-05 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A428/A428M-95 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM B636/B636M-15 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM F2217/F2217M-13 Standard Practice for Coating/Adhesive Weight Determination
ASTM F2217-02(2012) Standard Practice for Coating/Adhesive Weight Determination
ASTM A385-00 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385-01 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385-08 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385/A385M-22 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM B504-90(2023) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
ASTM B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
ASTM A918-06 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A90/A90M-11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A428/A428M-10(2014) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A918-06(2011) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM D4370-01(2012) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
ASTM B568-98(2014) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
ASTM B568-98(2009) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
ASTM B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B764-04(2021) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B764-94 Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B764-94(2003) Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
ASTM A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM B556-90(2012) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
ASTM B556-90(2013) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
ASTM B555-86(2023) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B764-04(2014) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit 40;STEP Test41;
ASTM A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A754/A754M-96(2004) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A90/A90M-09 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A754/A754M-18 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM B533-85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM B567-98(2009a) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
ASTM B555-86(2018) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM B567-98(2014) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
ASTM D2369-04 Standard Test Method for Volatile Content of Coatings
ASTM D2369-01e1 Standard Test Method for Volatile Content of Coatings
ASTM D2369-98 Standard Test Method for Volatile Content of Coatings
ASTM D2369-01 Standard Test Method for Volatile Content of Coatings
ASTM D2369-03 Standard Test Method for Volatile Content of Coatings
ASTM D2369-87 Standard Test Method for Volatile Content of Coatings
ASTM D2369-90 Standard Test Method for Volatile Content of Coatings
ASTM D2369-92 Standard Test Method for Volatile Content of Coatings
ASTM D2369-95 Standard Test Method for Volatile Content of Coatings
ASTM D2369-07 Standard Test Method for Volatile Content of Coatings
ASTM D2369-10(2015)e1 Standard Test Method for Volatile Content of Coatings
ASTM D4370-01 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM D4370-84(1994) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM D4370-01(2006) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM F326-23 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
ASTM B567-98(2021) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
ASTM B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM B555-86(1997) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
ASTM B555-86(2002) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
ASTM B555-86(2012) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM B555-86(2013) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM A754/A754M-11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A754/A754M-11(2016) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM F1940-07a(2019) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM B636/B636M-15(2021) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B680-80(2014) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
ASTM B680-80(2009) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
ASTM B530-09(2014) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
ASTM D7232-06(2022) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D1469-93 Standard Test Method for Total Rosin Acids Content of Coating Vehicles
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B499-09(2014) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM E53-02 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E53-98 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM E53-07 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B499-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
ASTM F2024-00 Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM B49-15 Standard Specification for Copper Rod for Electrical Purposes
ASTM B49-08 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM A90/A90M-07 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D7232-06(2012) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM E2824-18 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
ASTM D4898-90(2010) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM E1805-07 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E2824-18a Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM B866-95(2018) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM E1792-03 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM E1568-03(2008)e1 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E2824-11 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
ASTM E53-07(2013) Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM F1165-15 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM C694-90a(1995) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM E1568-03 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM C694-90a(2011)e1 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM F2544-06e1 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM F2544-06 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM E1568-93(1998) Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-96 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E1805-02 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E1568-21 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM A879/A879M-04 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM A879/A879M-22 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM E247-01(2005) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E247-01 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E247-96 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM C582-95 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM C582-09(2016) Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM E1568-13 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-13 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM E1371-90(1999) Standard Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys
ASTM E2824-23 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
ASTM C694-90a(2006) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM E247-01(2015)e1 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM C1207-10(2018) Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM F3052-14 Standard Guide for Conducting Small Boat Stability Test 40;Deadweight Survey and Air Inclining Experiment41; to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
ASTM D5465-16 Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
ASTM D3375-95a(2001) Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
ASTM D3375-95a Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
ASTM D3375-95a(2007) Standard Test Method for Column Capacity of Particulate Mixed Bed Ion
Exchange Materials
ASTM D3375-16 Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
ASTM B530-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
ASTM B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
ASTM B530-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
ASTM E1731-95(2001) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E1731-11(2018) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM F1502-05(2010) Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
ASTM F2853-10 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
ASTM D6093-97(2016) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

AASHTO - American Association of State Highway and Transportation Officials, Standard coating weight

T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2003 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 65-1983 Standard Method of Test for Weight of Coating on Zinc-Coated (Galvanized) Iron or Steel Articles (ASTM A90-81)
T 213-1991 Standard Specification for Weight of Coating on Aluminum-Coated Iron or Steel Articles (Eighteenth Edition; ASTM A 428-89)
T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles (Twentieth Edition; ASTM A428/A428M-95)
T 65M/T 65-1995 Standard Specification for Mass of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings (Eighteenth Edition; ASTM A90/A90M-93)
T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2011 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-1997 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings (Twentieth Edition; ASTM A90/A90M-95a)
T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2000 Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate
T19/T19M-1993 Standard Specification for Unit Weight and Voids in Aggregate (Eighteenth Edition; ASTM C29/C29M-91a)

Society of Automotive Engineers (SAE), Standard coating weight

SAE AS22759/86B-2007 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLTS
SAE AS22759/88B-2007 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLTS
SAE AS22759/83B-2006 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600-VOLT FSC 6145
SAE AS22759/84B-2006 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600-VOLT FSC 6145
SAE AS81044/5_A1-2009 Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Normal Weight, 600-Volt, 150°C
SAE AS81044/6_A1-2008 Wire, Electric, Crosslinked Polyalkene Insulated, Tin-Coated Copper, Normal Weight, 600-Volt, 150°C
SAE AS81044/6-2004 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, NORMAL WEIGHT, 600-VOLT, 150°C
SAE AS81044/6A-2022 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, NORMAL WEIGHT, 600 VOLT, 150 °C
SAE AS81044/5A-2016 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, NORMAL WEIGHT, 600-VOLT, 150°C
SAE AS81044/5-2007 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, NORMAL WEIGHT, 600-VOLT, 150°C
SAE AS81044/5B-2021 WIRE, ELECTRIC, CROSSLINKED POLYLALKENE INSULATED, SILVER-COATED COPPER, NORMAL WEIGHT, 600-VOLT, 150 °C
SAE AS22759/90B-2006 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 260 °C, 600 VOLTS FSC 6145
SAE AS22759/43-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt
SAE AS22759/34-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED COPPER, 150°C, 600 VOLT
SAE AS81044/7_A1-2008 Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Normal Weight, 600-Volt, 150°C
SAE AS22759/184-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Nickel-coated Copper Conductor, 260°C, 600 Volts
SAE AS22759/86A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, Copper Conductor, 200°C, 600 Volts
SAE AS22759/87A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/88A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Tin Coated, Copper Conductor, 150°C, 600 Volts
SAE AS22759/41-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED COPPER, 200°C, 600 VOLT
SAE AS22759/43-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED COPPER, 200°C, 600 VOLT
SAE AS22759/88A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150°C, 600 VOLTS
SAE AS22759/87A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS
SAE AS22759/86A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLTS
SAE AS22759/34-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED COPPER, 150°C, 600 VOLT
SAE AS22759/43A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, COPPER, 200 °C, 600 VOLT, ROHS
SAE AS22759/34A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED, COPPER, 150 °C, 600 VOLT, ROHS
SAE AS22759/41A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, COPPER, 200 °C, 600 VOLT, ROHS
SAE AS81044/7-2007 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, NORMAL WEIGHT, 600-VOLT, 150°C
SAE AS22759/83E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLT, ROHS
SAE AS22759/84E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
SAE AS22759/86E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLT, ROHS
SAE AS22759/87E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
SAE AS81044/7A-2021 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, NORMAL WEIGHT, 600-VOLT, 150 °C
SAE AS22759/88D-2017 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
SAE AS22759/88E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
SAE AS22759/85E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, TIN COATED COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
SAE AS22759/42-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/35-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/183B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 °C, VOLTS ROHS
SAE AS22759/42-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/35-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/95A-2021 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/184B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 °C, 600 VOLTS ROHS
SAE AS22759/95-2016 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/188B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 °C, 600 VOLTS ROHS
SAE AS22759/186B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 °C, 600 VOLTS ROHS
SAE AS22759/187C-2020 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 °C, 600 VOLTS ROHS
SAE AS22759/35A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/96B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
SAE AS22759/42A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/95B-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/186A-2015 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVERCOATED COPPER CONDUCTOR, 200 Degree C, 600 VOLTS
SAE AS22759/57A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/56A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/96A-2021 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
SAE AS22759/89A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 200°C, 600 VOLTS
SAE AS22759/189-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Silver-coated High Strength or Ultra High Strength Copper Alloy, 200 °C, 600 Volts
SAE AS22759/90A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 260°C, 600 VOLTS
SAE AS22759/195-2016 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS, ROHS
SAE AS22759/89B_A1-2009 Wire, Electric, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, High Strength or Ultra High Strength Copper, Alloy, 600-Volt, 200 °C
SAE AS22759/50A-2020 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED COPPER 200 °C, 600 VOLT, ROHS
SAE AS22759/195A-2021 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS, ROHS
SAE AS22759/50B-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED COPPER 200 °C, 600 VOLT, ROHS

SAE - SAE International, Standard coating weight

SAE AS22759/86C-2015 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLTS
SAE AS22759/88C-2015 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLTS
SAE AS22759/83C-2015 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600-VOLT FSC 6145
SAE AS81044/6-A1-2008 "Wire@ Electric@ Crosslinked Polyalkene Insulated@ Tin-Coated Copper@ Normal Weight@ 600-Volt@ 150°C,"
SAE AS22759/41A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, COPPER, 200 °C, 600 VOLT, ROHS
SAE AS22759/43A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, COPPER, 200 °C, 600 VOLT, ROHS
SAE AS22759/34A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED, COPPER, 150 °C, 600 VOLT, ROHS
SAE AS81044/7-A1-2008 "Wire@ Electric@ Crosslinked Polyalkene Insulated@ Silver-Coated High Strength Copper Alloy@ Normal Weight@ 600-Volt@ 150°C,"
SAE AS22759/85C-2015 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED@ NORMAL WEIGHT@ TIN COATED COPPER CONDUCTOR@ 150 °C@ 600 VOLT@ ROHS
SAE AS22759/85B-2006 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED@ NORMAL WEIGHT@ TIN COATED COPPER CONDUCTOR@ 150 °C@ 600 VOLT@ ROHS
SAE AS22759/85D-2017 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED@ NORMAL WEIGHT@ TIN COATED COPPER CONDUCTOR@ 150 °C@ 600 VOLT@ ROHS
SAE AS22759/86D-2017 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED@ NORMAL WEIGHT@ SILVER COATED@ COPPER CONDUCTOR@ 200 °C@ 600 VOLT@ ROHS
SAE AS22759/54A-2015 WIRE@ ELECTRICAL@ FLUOROPOLYMER-INSULATED@ CROSSLINKED MODIFIED ETFE@ LOW FLUORIDE@ NORMAL WEIGHT@ SILVER-COATED COPPER@ 200 °C@ 600 VOLT@ ROHS
SAE AS22759/42A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/35A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/188B-2017 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 °C, 600 VOLTS ROHS
SAE AS22759/85-2000 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Normal Weight@ Tin Coated Copper Conductor@ 150 Degrees Celsius@ 600-Volt
SAE AS22759/88-2000 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Normal Weight@ Tin Coated@ Copper Conductor@ 150 Degrees Celsius@ 600 Volts
SAE AS22759/54B-2018 WIRE@ ELECTRICAL@ FLUOROPOLYMER-INSULATED@ CROSSLINKED MODIFIED ETFE@ LOW FLUORIDE@ NORMAL WEIGHT@ SILVER-COATED COPPER@ 200 °C@ 600 VOLT@ ROHS
SAE AS22759/56-2016 WIRE@ ELECTRICAL@ FLUOROPOLYMER-INSULATED@ CROSS-LINKED MODIFIED ETFE@ NORMAL WEIGHT@ SILVER COATED@ EXTRA HIGH STRENGTH COPPER ALLOY@ 200 °C@ 600 VOLT@ ROHS
SAE AS22759/57-2016 WIRE@ ELECTRICAL@ FLUOROPOLYMER-INSULATED@ CROSS-LINKED MODIFIED ETFE@ NORMAL WEIGHT@ NICKEL COATED@ EXTRA HIGH STRENGTH COPPER ALLOY@ 200 °C@ 600 VOLT@ ROHS
SAE AS22759/96-2016 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/ POLYMIDE INSULATED@ NORMAL WEIGHT@ NICKEL COATED@ EXTRA HIGH STRENGTH COPPER ALLOY@ 260 °C@ 600 VOLT@ ROHS
SAE AS22759/50A-2015 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED COPPER 200 °C, 600 VOLT, ROHS
SAE AS22759/185-2010 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED@ SMOOTH SURFACE@ NORMAL WEIGHT@ TINCOATED COPPER CONDUCTOR@ 150 Degree C@ 600 VOLTS
SAE AS22759/185A-2014 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED@ SMOOTH SURFACE@ NORMAL WEIGHT@ TINCOATED COPPER CONDUCTOR@ 150 Degree C@ 600 VOLTS

未注明发布机构, Standard coating weight

SAE AS22759/83D-2017 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600-VOLT FSC 6145
SAE AS22759/87C-2014 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/87D-2018 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/183B-2017 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 °C, VOLTS ROHS
SAE AS22759/184B-2017 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 °C, 600 VOLTS ROHS
SAE AS22759/186B-2017 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 °C, 600 VOLTS ROHS
SAE AS22759/185B-2017 WIRE@ ELECTRICAL@ POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED@ SMOOTH SURFACE@ NORMAL WEIGHT@ TINCOATED COPPER CONDUCTOR@ 150 Degree C@ 600 VOLTS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard coating weight

GB 8771-1988 Hygienic standard for lead content of pencil coating

UY-UNIT, Standard coating weight

(U.S.) Ford Automotive Standards, Standard coating weight

FORD ESA-M1A191-D-2002 STEEL, TERNE COATED, 8.0% TIN MINIMUM ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESA-M1A191-C)
FORD WSS-M2P189-A10-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
FORD WSS-M2P189-A17-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG?E? CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***

National Health Commission of the People's Republic of China, Standard coating weight

GB 5009.74-2014 National Food Safety Standards Tests for Limits of Heavy Metals in Food Additives

VE-FONDONORMA, Standard coating weight

Defense Logistics Agency, Standard coating weight

DLA MIL-W-81381/12 C VALID NOTICE 4-2013 Wire, Electric, Fluorocarbon/Polyimide Insulated, Medium Weight, Nickel Coated Copper Conductor, 600 Volts, Nominal 8.4 or 15.4 Mil Wall
DLA MIL-W-81381/14 D VALID NOTICE 4-2013 Wire, Electric, Fluorocarbon/Polyimide Insulated, Medium Weight, Nickel Coated High Strength Copper Alloy Conductor, 600 Volts, Nominal 8.4 Mil Wall
DLA DSCC-DWG-04041 REV B-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREE C, 600 VOLT
DLA DSCC-DWG-04042 REV B-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREE C, 600 VOLT
DLA DSCC-DWG-04040 REV B-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREE C, 600 VOLT
DLA DSCC-DWG-04041 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREE C, 600 VOLT
DLA DSCC-DWG-04042 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREES C, 600 VOLT