ZH
RU
ES

Solid content

Solid content, Total:105 items.

In the international standard classification, Solid content involves: Adhesives, Electromechanical components for electronic and telecommunications equipment, Milk and milk products, Plastics, Water quality, Wastes, Paints and varnishes, Raw materials for rubber and plastics, Equipment for petroleum and natural gas industries.


German Institute for Standardization, Solid content

  • DIN EN 827:2006-03 Adhesives - Determination of conventional solids content and constant mass solids content; German version EN 827:2005
  • DIN EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content; English version of DIN EN 827:2006-03
  • DIN EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001
  • DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
  • DIN EN 14346:2007 Characterization of waste - Calculation of dry matter by determination of dry residue or water content; English version of DIN EN 14346:2007-03
  • DIN EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003
  • DIN EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001

Professional Standard - Chemical Industry, Solid content

  • HG/T 4266-2011 Determination of solid content of textile dyeing and finishing auxiliaries

BE-NBN, Solid content

  • NBN EN 827-1995 Adhesives - Determination of conventional solids content and constant mass solids content

British Standards Institution (BSI), Solid content

  • BS EN 827:2005 Adhesives - Determination of conventional solids content and constant mass solids content
  • BS EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content
  • BS EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)

European Committee for Standardization (CEN), Solid content

  • EN 827:2005 Adhesives - Determination of conventional solids content and constant mass solids content
  • EN 827:1994 Adhesives - Determination of Conventional Solids Content and Constant Mass Solids Content
  • prEN 827-1992 Adhesives; determination of conventional solids content and constant mass solids content
  • EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)

Danish Standards Foundation, Solid content

  • DS/EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content

Lithuanian Standards Office , Solid content

  • LST EN 827-2006 Adhesives - Determination of conventional solids content and constant mass solids content

AENOR, Solid content

  • UNE-EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content
  • UNE 34824:1983 DETERMINATION OF THE TOTAL SOLID CONTENT OF MILK.

未注明发布机构, Solid content

  • BS EN 827:2005(2007) Adhesives — Determination of conventional solids content and constant mass solids content

(U.S.) Ford Automotive Standards, Solid content

  • FORD ESB-M33J100-A-1990 ENAMEL, ACRYLIC, HIGH SOLIDS, LOW VOC, EXTERIOR
  • FORD ESF-M7J40-A-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS, 2 PARTS, ELECTRICAL INSULATING
  • FORD WSA-M9G20-B-2006 WAX, WATER EMULSION, HIGHER SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M7C79-A-2004 CAVITY WAX, SOLVENT BASED, 65% SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M7C95-A-2004 SUPERFICIAL WAX, SOLVENT BASED, 35% SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M50J107-A-1980 ENAMEL, ACRYLIC BAKING- INTERMEDIATE SOLIDS - NON-AQUEOUS DISPERSION (NAD), EXTERIOR BODY QUALITY
  • FORD WSS-M7C93-A-2004 CAVITY WAX, WATER BASED, MEDIUM SOLID, 50% SOLID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M6J160-A1-1991 PRIMER SURFACER, COLOURED, PU-MODIFIED POLYESTER, MEDIUM SOLID, 165 C BAKING TEMPERATURE
  • FORD ESB-M32J106-A-1996 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, INTERMEDIATE HIGH SOLIDS, EXTERIOR LOW AND MEDIUM GLOSS
  • FORD ESB-M32J126-A-1991 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, HIGH SOLIDS, EXTERIOR, LOW AND MEDIUM GLOSS
  • FORD ESB-M36J1-A1-1996 ENAMEL, THERMOSETTING, ACRYLIC BASECOAT, HIGH SOLIDS, WET ON WET PROCESS EXTERIOR
  • FORD ESF-M7J40-A2-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS 2 PARTS, ELECTRICAL INSULATING Shown on ESF-M7J40-A
  • FORD ESF-M7J40-A3-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS 2 PARTS, ELECTRICAL INSULATING Shown on ESF-M7J40-A
  • FORD SK-M98J9552-B-2005 MEDIUM SOLID BAKING ENAMEL, EXTERIOR QUALITY, READY TO SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99J392-A-2007 HARDENER, TWO PACK, 40% SOLIDS MIN, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M33J10-A4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
  • FORD WSS-M33J10-B1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
  • FORD WSS-M33J7-B4-2006 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET BASECOAT, WET ON WET PROCESS WITH WSS-M33J7-B5 CLEARCOAT, ETCH & SCRATCH RESISTANT, EXTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M7C53-A4-2004 RUST PREVENTIVE COMPOUND - SPRAYABLE WAX TYPE - HEAT RESISTANT - HIGH SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M7C53-A
  • FORD ESB-M33J100-A2-1990 ENAMEL, ACRYLIC, HIGH SOLIDS, LOW VOC, EXTERIOR, REDUCED VISCOSITY Shown on ESB-M33J100-A
  • FORD ESK-M6J151-A2-2008 PRIMER SURFACER, PU- MODIFIED, MEDIUM SOLID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M33J10-B2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
  • FORD WSS-M33J10-A1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-A2/WSS M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M36J1-A3-1989 ENAMEL, CATALKYZED 2- COMPONENT CLEARCOAT - HIGH SOLIDS, WET-ON-WET LOW BAKE REPAIR PROCESS, EXTERIOR
  • FORD WSS-M99B191-A2-2009 LUBRICANT, WATER BASED, FLUOROCHEMICAL/RESIN EMULSION, HIGHER SOLIDS, PROCESS AID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M36J1-A4-1996 ENAMEL, THERMOSET 2 COMPONENT URETHANE CLEARCOAT, 10 K.H.N. TUKON, HIGH SOLIDS, WET- ON-WET PROCESS, EXTERIOR Shown on ESB-M36J1-A1
  • FORD ESB-M99J330-A-2006 CATALYST, ACID (SOLUTION) - HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99J332-A-2006 CATALYST, ACID (SOLUTION) - HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99J339-A-2006 CATALYST, ACID (SOLUTION) , HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M33J10-B3-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
  • FORD WSS-M33J10-B4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
  • FORD WSS-M33J10-B5-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M33J10-A1
  • FORD ESB-M36J1-A2-1996 ENAMEL, THERMOSET 2 COMPONENT URETHANE CLEARCOAT, 5 K.H.N. TUKON, HIGH SOLIDS, WET- ON-WET PROCESS, EXTERIOR Shown on ESB-M36J1-A1
  • FORD ESB-M99J351-A-2006 CATALYST, ACID(SOLUTION),HIGH SOLIDS, LOW VOC THERMOSET BASECOAT/CLEARCOAT ENAMEL, LOW BAKE REPAIR PROCESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M6J120-D-2008 PRIMER SURFACER, LOW BAKE EPOXY - HIGH SOLIDS - TAUPE - EXEMPT SOLVENT (10% REACTIVE) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M33J10-A2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)

Association Francaise de Normalisation, Solid content

  • NF T76-101*NF EN 827:2006 Adhesives - Determination of conventional solids content and constant mass solids content.
  • NF T76-101:1995 Adhesives. Determination of conventional solids content and constant mass solids content.
  • NF V04-392-2*NF EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2 : determination of non-fat solids contents (reference method)
  • NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
  • NF V04-392-3*NF EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat-solids and fat contents - Part 3 : calculation of fat content.
  • V04-370:1994 Fermented milk. Determination of total solids content.

AR-IRAM, Solid content

GM North America, Solid content

  • GM 9984198-2009 Topcoat System - High Solids Basecoat, 1K Etch Resistant Clearcoat for Outsourced Parts (Revision B)
  • GM 9984470-1989 Clearcoat - Low Solids, Rigid Replaced by GM9984037
  • GM 9984121-2014 Primer Surfacer - High Solids, Low Bake (Issue 6)
  • GM 9984068-2014 Primer Surfacer - High Solids, High Bake (Issue 10)

CZ-CSN, Solid content

  • CSN 46 3204-1986 Fresh citrus fruits. Testing methods for juice content, solids content, acidity and stage of maturity

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Solid content

United States Navy, Solid content

IPC - Association Connecting Electronics Industries, Solid content

HU-MSZT, Solid content

ZA-SANS, Solid content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid content

NL-NEN, Solid content

International Organization for Standardization (ISO), Solid content

  • ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
  • ISO 3727-3:2003|IDF 80-3:2003 Butter — Determination of moisture, non-fat solids and fat contents — Part 3: Calculation of fat content
  • ISO 3727-3:2003 Butter - Determination of moisture, not-fat solids and fat contents - Part 3: Calculation of fat content
  • ISO 124:2011 Latex, rubber - Determination of total solids content

RO-ASRO, Solid content

Korean Agency for Technology and Standards (KATS), Solid content

  • KS M ISO 124:2014 Latex, rubber — Determination of total solids content
  • KS M ISO 124:2020 Latex, rubber — Determination of total solids content
  • KS H ISO 3727-3:2006 Butter－Determination of moisture, non-fat solids and fat contents－Part 3：Calculation of fat content

Professional Standard - Petroleum, Solid content

KR-KS, Solid content

国家能源局, Solid content

  • SY/T 5382-2009 Drilling fluid solid phase content measuring instrument

PT-IPQ, Solid content

CU-NC, Solid content

  • NC 84-10-1986 Mineral Waters. Determination of the Content of Dissolved Total Solid Substances

ANSI - American National Standards Institute, Solid content

  • N15.22-1987 Nuclear Materials - Plutonium-Bearing Solids - Calibration Techniques for Calorimetric Assay (INMM)

(U.S.) Parachute Industry Association, Solid content

Professional Standard - Agriculture, Solid content

  Mercury content, sulfur content, Carbon content, carbon content, nitrogen content, Medium solid content, Glue content, Chlorine content, Fluorine content, Quantity solid, iodine content, Phosphorus content, Tin content, Solid content, Aluminum content, Nickel content, Adhesive solid content, Adhesive, solid content, Resin solid content, liquid solid.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved