ZH
RU
ES

What about the molecular mass

What about the molecular mass, Total:499 items.

In the international standard classification, What about the molecular mass involves: Farming and forestry, Laboratory medicine, Agricultural machines, implements and equipment, Pharmaceutics, Raw materials for rubber and plastics, Analytical chemistry, Radiation measurements, Products of the chemical industry, Plastics, Microprocessor systems, Tobacco, tobacco products and related equipment, Crude petroleum, Animal feeding stuffs, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Hydraulic energy engineering, Non-ferrous metals, Equipment for entertainment, Petroleum products in general, Spices and condiments. Food additives, Electronic display devices, Telecommunication terminal equipment, Electronic components in general, Printed circuits and boards, Cereals, pulses and derived products, Medical sciences and health care facilities in general, Energy and heat transfer engineering in general, Nuclear energy engineering, Optics and optical measurements, Fuels, Water quality, Resistors, Applications of information technology, Air quality, Testing of metals, Powder metallurgy, Electronic component assemblies, Edible oils and fats. Oilseeds, Particle size analysis. Sieving, Fruits. Vegetables, Capacitors, Astronomy. Geodesy. Geography, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Quality, Piezoelectric and dielectric devices, Soil quality. Pedology, Fertilizers, Fibre optic communications, Equipment for petroleum and natural gas industries, Optoelectronics. Laser equipment, Physics. Chemistry, Semiconductor devices, Audio, video and audiovisual engineering, Electronic tubes, Character sets and information coding, Pulps, Paper and board, Services, Welding, brazing and soldering, Rotating machinery, Thermodynamics and temperature measurements, Information technology (IT) in general, Sugar. Sugar products. Starch, Wastes, Metalliferous minerals, IT terminal and other peripheral equipment, Components for electrical equipment, Transformers. Reactors.


US-CFR-file, What about the molecular mass

  • CFR 50-23.71-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.71:How can I trade internationally in sturgeon caviar?
  • CFR 11-111.37-2014 Federal elections. Part111:Compliance procedure (52 U.S.C. 30109, 30107(a)). SubpartB:Administrative fines. Section111.37:What will the Commission do once it receives the respondent's written response and the reviewing officer's recommendation?
  • CFR 2-180.430-2014 Grants and agreements. Part180:Omb guidelines to agencies on governmentwide debarment and suspension (nonprocurement). SubpartD:Responsibilities of federal agency officials regarding transactions. Section180.430:How do I check to see if a person is exclud

Chongqing Provincial Standard of the People's Republic of China, What about the molecular mass

国家药监局, What about the molecular mass

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What about the molecular mass

  • GB 7908-1999 Classification of forest tree seed quality
  • GB/T 26422-2010 Classification of Azadirachta indica seed quality
  • GB 6141-2008 Quality grading of legume seeds
  • GB/T 26615-2011 Quality grading of the princes-feather(Amaranthus hypochondriacus L.) seeds
  • GB/T 26614-2011 Quality grading of the Chinese ephedra(Ephedra L.) seeds
  • GB 6142-2008 Quality grading of the grass seeds
  • GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
  • GB 6143-1985 Qualities grading of main cultivated artemisia sphaerocephala and kochia prostrata seeds
  • GB 6141-1985 Qualities grading of main cultivated legume seeds
  • GB/T 24869-2010 Quality grading and testing for main sandy forage seed
  • GB 6142-1985 Qualities grading of main cultivated grasses seeds
  • GB/T 31526-2015 Evaluation and classification of service quality for electronic commerce platform
  • GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
  • GB/T 27403-2008 Criterion on quality control of laboratories.Molecular biological testing of food
  • GB/T 22181.23-2012 Plasma display panels.Part 2-3:Measuring methods for module quality
  • GB/T 17139-1997 Soil quality--Determination of nickel--Flame atomic absorption spectrophotometry
  • GB/T 17136-1997 Soil quality--Determination of total mercury--Cold atomic absorption spectrophotometry
  • GB/T 17137-1997 Soil quality--Determination of total chromium--Flame atomic absorption spectrophotometry
  • GB/T 17138-1997 Soil quality--Determination of copper, zinc--Flame atomic absorption spectrophotometry
  • GB/T 22085.1-2008 Electron and laser beam welded joints-Guidance on quality levels for imperfections-Part 1:Steel
  • GB/T 17141-1997 Soil quality--Determination of lead, cadmium--Graphite furnace atomic absorption spectrophotometry
  • GB/T 15249.5-1994 Crude Gold-Determination of mercury content-Cold atomic absorption spectrometric method
  • GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry

HU-MSZT, What about the molecular mass

Professional Standard - Agriculture, What about the molecular mass

  • GB 7908-1989 Forest tree seed quality classification
  • JB/T 51220.1-1994 Compound and specific gravity seed cleaning machine product quality classification and other quality indicators
  • NY/T 372-2010 Technical specifications of quality evaluation for gravity seed separator
  • NY/T 365-2017 Seed indent cylinder separators.Technical specification of quality evaluation
  • JB/T 51220.2-1994 Test method for product quality classification of compound and specific gravity seed cleaners

Inner Mongolia Provincial Standard of the People's Republic of China, What about the molecular mass

Qinghai Provincial Standard of the People's Republic of China, What about the molecular mass

Shandong Provincial Standard of the People's Republic of China, What about the molecular mass

Hunan Provincial Standard of the People's Republic of China, What about the molecular mass

Shanxi Provincial Standard of the People's Republic of China, What about the molecular mass

Liaoning Provincial Standard of the People's Republic of China, What about the molecular mass

British Standards Institution (BSI), What about the molecular mass

  • BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
  • BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
  • BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
  • BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
  • BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)
  • BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter
  • BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN 160200-2:1998 Harmonized system of quality assessment for electronic components - Sectional specification - Microwave modular electronic units of assessed quality - Index of test methods
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN 147100:1995 Harmonized system of quality assessment for electronic components - Sectional specification: relay sockets of assessed quality
  • PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
  • BS ISO 19463:2018 Microbeam analysis. Electron probe microanalyser (EPMA). Guidelines for performing quality assurance procedures
  • BS PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
  • BS EN 170100:2001 Harmonized system of quality assessment for electronic components - Sectional specification: Waveguide type dielectric resonators
  • 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
  • BS EN 188200:1996 Harmonized system of quality assessment for electronic components - Sectional specification - Optical fibres A1 category graded index multimode
  • BS EN 111100:1984 Harmonized system of quality assessment for electronic components: sectional specification: display storage tubes
  • BS EN 175200:1997 Harmonized system of quality assessment for electronic components - Sectional specification: circular connectors
  • BS EN 111100:1992 Harmonized system of quality assessment for electronic components: sectional specification: display storage tubes
  • BS ISO 14595:2023 Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
  • BS QC 720100:1991 Harmonized system of quality assessment for electronic components. Semiconductor devices. Sectional specification for optoelectronic devices
  • BS QC 300600:1991 Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification for fixed capacitors of ceramic dielectric, class 1
  • BS QC 300700:1992 Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification for fixed capacitors of ceramic dielectric, class 2
  • 22/30442107 DC Printed Electronics - Part 507-1. Quality assessment. Printed electrode and rivet connection to wire terminal
  • BS 3762-3.7:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content
  • BS CECC 41200:1979 Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
  • BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval

Group Standards of the People's Republic of China, What about the molecular mass

  • T/AGIA 001-2021 Standard for seed quality grading of American ginseng
  • T/SAIA 002-2021 Standard for seed quality grading of Bupleurum chinense
  • T/GDGAA 0004-2022 Terahertz quantum fingerprint detection and analysis system for quality control of traditional chinese medicine
  • T/GGI 039-2018 Chishui Dendrobium nobile Part III: Seed and Seedling Quality
  • T/WZZC 026.5-2021 Quality Requirements for Wuzhong Morning Tea Products Part 5: Sanzi
  • T/ZZQJ 009-2023 Standard complex for firstborn green peppers Part 4: Classification of quality grades
  • T/CNFIA 005.10-2019 Food quality grades for nuts and seeds Part 10: Raw and dried melon seeds
  • T/CNFIA 005.7-2019 Food quality class for nuts and seeds Part 7: Raw and dried hazelnuts
  • T/CAS ES370112008-2022 Rules for quality grading and evaluating of industrial products—Electronic downhole pressure gauge
  • T/ZJBX 10-2021 Determination of the proportion of protein hydrolysates with relative molecular weight less than 1000u in protein feed
  • T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
  • T/ZGM 023-2022 Assessment requirements for quality grading and forerunner Nuclear grade ion exchange resins
  • T/CNMIA 0039-2023 Private Laboratory of Molecular Pathology Performance Capability Evaluation
  • T/GDBJ 0002.4-2023 Specification of grading for confinement health care institutions Part4: quality requirement
  • T/CRRA 0308-2023 Quality grading evaluation and acceptance for dismantled plastics of waste electrical and electronic equipment

Professional Standard - Electron, What about the molecular mass

  • SJ/T 9525-1993 Quality grade standard for electronic organ
  • SJ/T 9528-1993 Electronic calculator--Quality grading standard
  • SJ/T 9561.1-1993 KN1 toggle lever switch--Quality grading standard
  • SJ/T 9561.5-1993 KN6 toggle lever switch--Quality grading standard
  • SJ/T 9561.2-1993 KW5 sensitive switch--Quality grading standard
  • SJ/T 9561.3-1993 KN3 toggle lever switch--Quality grading standard
  • SJ/T 9561.4-1993 KN4 toggle lever switch--Quality grading standard
  • SJ/T 9526-1993 Household electronic games--Quality grading standard
  • SJ/T 9501-1991 Quality grading standard for electronic products--Preparation guide
  • SJ/T 9527-1993 Digital micro-computer--Quality grading standard
  • SJ/T 9549-1993 Fixed resistors for use in electronic equipment--Quality grading standard
  • SJ/T 9509-1993 Granding stander of quility for electronic tuners used in TV broadcasting receivers
  • SJ/T 11696.1-2017 Electronics and information product realization.Quality management.Part 1: Design and development
  • SJ/T 9567-1995 Quality grading standard for Chinese and Western electronic typewriters for office affairs processing
  • SJ/T 9530-1993 CRT display for digital computers--Quality grading standard

Xinjiang Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB65/T 3010-2009 Quality grading of the princes.feather(Amaranthus hypochondriacus L.)seeds
  • DB65/T 3009-2009 Quality grading of the Chinese ephedra(EphedraL.)seeds
  • DB65/T 2604-2006 Seed qualieg grade scale of Galega orientalis Lam.cv Xinyin No.1
  • DB65/T 3715-2015 Technical regulations for quality classification and inspection of Cistanche deserticola seeds
  • DB65/T 4536.8-2022 E-government Extranet Construction Specifications Part 8: Network Quality Specifications
  • DB65/T 4303.6-2020 Apricot Mechanized Processing Equipment Part 6: Operation Quality of Apricot Kernel Separator

Guangxi Provincial Standard of the People's Republic of China, What about the molecular mass

Hebei Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB13/T 614-2005 Seedling quality grading Pinus sylvestris
  • DB13/T 1320.7-2010 Quality Standards for Chinese Medicinal Materials Seeds Part 7: Shegan
  • DB13/T 1083.2-2009 Quality Standards for Seeds of Chinese Medicinal Materials Part 2: Scutellaria baicalensis
  • DB13/T 1083.1-2009 Quality Standards for Seeds of Chinese Medicinal Materials Part 1: Polygala
  • DB13/T 1083.3-2009 Quality Standards for Seeds of Chinese Medicinal Materials Part 3: Zhimu
  • DB13/T 1320.4-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 4: Schizonepeta
  • DB13/T 1320.1-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 1: Perilla
  • DB13/T 1320.9-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 9: Angelica dahurica
  • DB13/T 1320.3-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 3: Campanulaceae
  • DB13/T 1320.10-2010 Quality Standards for Chinese Medicinal Materials Seeds Part 10: Fangfeng
  • DB13/T 1320.2-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 2: Isatis indigo
  • DB13/T 1320.5-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 5: Qumai
  • DB13/T 1320.6-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 6: Astragalus
  • DB13/T 1320.8-2010 Quality Standards for Seeds of Chinese Medicinal Materials Part 8: Achyranthes bidentata
  • DB13/T 2776.3-2018 Vegetable Seedling Quality in Intensive Production Part 3: Eggplant

International Organization for Standardization (ISO), What about the molecular mass

  • ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
  • ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
  • ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
  • ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
  • ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
  • ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
  • ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
  • ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
  • ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • ISO 2871-1:1988 Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter
  • ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • ISO 2871-2:1990 Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)
  • ISO 665:1977 Oilseeds — Determination of moisture and volatile matter content
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO/PRF 14595 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)
  • ISO 14595:2023 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)
  • ISO 11543:2000 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry

Korean Agency for Technology and Standards (KATS), What about the molecular mass

  • KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
  • KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
  • KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
  • KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS C IEC 61988-2-3-2007(2022) Plasma display panels－Part 2－3：Measuring methods－Quality
  • KS C IEC 61988-2-3-2007(2017) Plasma display panels－Part 2－3：Measuring methods－Quality
  • KS M ISO 2871:2007 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS C IEC 62899-402-1:2020 Printed electronics — Part 402-1: Printability —Measurement of qualities — Pattern width
  • KS D ISO 17560-2003(2018)
  • KS D ISO 7627-6-2012(2022) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 6：Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 7627-6-2012(2017) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 6：Determination of chromium in contents from 0.01 to 2 % (mass fraction)
  • KS D ISO 14237-2003(2018)
  • KS D ISO 7627-4-2012(2017) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-4-2012(2022) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-2-2012(2017) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
  • KS D ISO 7627-3-2012(2017) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-3-2012(2022) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
  • KS C IEC 61988-2-3:2007 Plasma display panels－Part 2－3：Measuring methods－Quality
  • KS D ISO 7627-2-2012(2022) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
  • KS X 7002-1-2012(2017) Information technology－e-Learning Quality Assurance Guideline－Content－Part 1：General
  • KS D ISO 7627-5-2012(2017) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 5：Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 % (mass fracti
  • KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
  • KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS M ISO 2871-2:2007 Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS D ISO 7627-5-2012(2022) Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 5：Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 % (mass fracti
  • KS D ISO 7627-2:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
  • KS D ISO 7627-3:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
  • KS D ISO 7627-4:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
  • KS C IEC 61190-1-1-2006(2021) Attachment materials for electronic assembly－Part 1－1：Requirements for soldering fluxes for high-quality interconnections in electronics assembly
  • KS X 7002-1-2012 Information technology－e-Learning Quality Assurance Guideline－Content－Part 1：General
  • KS X 7003-1-2010 Information technology-e-Learning Quality Assurance Guideline-Service-Part 1:General
  • KS X 7003-1-2010(2020) Information technology－e-Learning Quality Assurance Guideline－Service－Part 1：General
  • KS X 7002-1-2012(2022) Information technology－e-Learning Quality Assurance Guideline－Content－Part 1：General

Professional Standard - Machinery, What about the molecular mass

  • JB/T 50047-1999 Measuring tools, measuring instruments, product quality grading, electronic plug gauges
  • JB/T 50048-1999 Rotor sand mixer product quality classification
  • JB/T 54283-1999 Measuring tools Measuring instruments Product quality grading Electronic digital calipers
  • JB/T 54879-1999 Product quality classification of tapered pin reamer
  • JB/T 54289-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display height calipers
  • JB/T 54288-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display depth calipers
  • JB/T 56178-1999 Stator Coil Middle Stretching Machine Product Quality Grading
  • JB/T 53397-1999 Quality classification of precision roller chains and bush chains
  • JB/T 50079-1999 Air plasma arc cutting machine product quality classification
  • JB/T 53251-1999 Product quality classification of rotor type heavy oil pump for oil field
  • JB/T 53538-1999 Product quality classification of double rotor impact crusher
  • JB/T 53496-2000 50MW~600MW Generator Rotor Forging Product Quality Grading
  • JB/T 53537-1999 Product quality classification of single rotor impact crusher
  • JB/T 53485-2000 Quality grading of rotor forgings for generators below 50MW
  • JB/T 50197-2000 6MW~600MW Steam Turbine Rotor and Main Shaft Forging Product Quality Grading
  • JB/T 50132-1999 Quality classification of finished products of stator coils for medium-sized high-voltage motors
  • JB/T 50032-1999 Product quality classification of plate-fin oil cooler cores for internal combustion engines

Ningxia Provincial Standard of the People's Republic of China, What about the molecular mass

Sichuan Provincial Standard of the People's Republic of China, What about the molecular mass

农业农村部, What about the molecular mass

  • NY/T 3252.2-2018 Industrial Hemp Seeds Part 2: Seed Quality
  • NY/T 366-2020 Technical specifications for quality evaluation of seed graders
  • NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)

未注明发布机构, What about the molecular mass

  • BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
  • BS EN 147100:1995(2000) Harmonized system of quality assessment for electronic components Sectional specification : Relay sockets of assessed quality
  • BS EN 160200-1:1998 Harmonized system ofquality assessment for electronic components Sectional specification : Microwave modular electronic units of assessed quality — Part 1 : Capability approval procedure
  • BS EN 116500:1996(2000) Harmonized system ofquality assessment for electronic components Sectional specification : Electromechanical all - or - nothing TELECOM relays of assessed quality
  • BS EN 188100:1995(1999) Harmonized system ofquality assessment for electronic components Sectional specification : Single - mode (SM) optical fibre
  • BS EN 130800:2001(2003) Harmonized system of quality assessment for electronic components assessment for electronic components — Sectional specification : Tantalum surface mounting capacitors
  • BS EN 140200:1997(2002) Harmonized system of quality assessment for electronic components — Sectional specification : Fixed power resistors

German Institute for Standardization, What about the molecular mass

  • DIN 6809-1:2010 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
  • DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
  • DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
  • DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
  • DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • DIN 6809-1:2010-03 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
  • DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
  • DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
  • DIN 6809-9:2021 Clinical Dosimetry - Part 9: Quality of photon radiation in the patient or phantom
  • DIN 6809-9:2021-11 Clinical Dosimetry - Part 9: Quality of photon radiation in the patient or phantom
  • DIN EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011); German version EN ISO 10927:2011
  • DIN EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012); German version EN ISO 16014-5:2012
  • DIN EN 61988-2-4:2012-04 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts (IEC 61988-2-4:2011); German version EN 61988-2-4:2011
  • DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
  • DIN IEC/TS 62607-3-2:2014 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
  • DIN EN 17124:2022-12 Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles; German version EN 17124:2022 / Note: This standard is part of t...
  • DIN 45910-18:1982 Harmonized system of quality assessment for electronic components; sectional specification; fixed ceramic dielectric; capacitors of barrier layer type (dielectric class 3)
  • DIN EN 61988-2-3:2010-05 Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation (IEC 61988-2-3:2009); German version EN 61988-2-3:2009
  • DIN IEC/TS 62607-3-2:2018 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
  • DIN 45910-24:1982 Harmonized system of quality assessment for electronic components; sectional specification; fixed mica dielectric d.c. capacitors
  • DIN 45910-15:1983 Harmonized system of quality assessment for electronic components; sectional specification: tantalum chip capacitors
  • DIN EN 62197-1:2007 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification (IEC 62197-1:2006); German version EN 62197-1:2006
  • DIN EN 62197-1:2007-02 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification (IEC 62197-1:2006); German version EN 62197-1:2006 / Note: DIN EN 61076-1 (2002-07) remains valid alongside this standard until 2009-05-01.
  • DIN 45922-112:1979 Harmonized system of quality assessment for electronic components; blank detail specification: preset potentiometers (assessment level M)
  • DIN 45922-121:1979 Harmonized system of quality assessment for electronic components; blank detail specification: power potentiometers (assessment level S)
  • DIN EN 61190-1-2:2014-11 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (IEC 61190-1-2:2014); German version EN 61190-1-2:2014 / Note: DIN EN 61190-1-2 (2007-11) remains valid al...
  • DIN 45922-12:1979 Harmonized system of quality assessment for electronic components; sectional specification: power potentiometers
  • DIN 45910-172:1991 Harmonized system of quality assessment for electronic components; detail specification: fixed capacitors of ceramic dielectric, class 2; assessment level P
  • DIN EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
  • DIN EN 61190-1-2:2007 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (IEC 61190-1-2:2007); German version EN 61190-1-2:2007
  • DIN EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006); English version of DIN EN ISO 17852:2008-04
  • DIN 45970-13:1983 Harmonized system of quality assessment for electronic components; sectional specification: magnetic oxide cores for power application

Association Francaise de Normalisation, What about the molecular mass

  • NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
  • NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
  • CWA 15533:2006 A model for the classification of quality approaches in eLearning
  • NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • NF X31-201:1982
  • NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF EN 26777:1993 Qualité de l'eau - Dosage des nitrites - Méthode par spectrométrie d'absorption moléculaire
  • NF M60-404:1998 Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality. Gravimetric method.
  • NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
  • NF T73-320-2*NF EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
  • NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
  • NF C83-110:1981 Harmonized system of quality assessment for electronic components. Sectional specification. Aluminium electrolytic capacitors.
  • NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
  • NF C83-112:1981 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. SECTIONAL SPECIFICATION. TANTALUM CAPACITORS.
  • NF T90-007:2001 Water quality - Determination of soluble silicates - Molecular absorption spectrometric method.
  • NF C93-548-2-3*NF EN 61988-2-3:2010 Plasma display panels - Part 2-3 : measuring methods - Image quality : defects and degradation
  • NF C93-548-2-4*NF EN 61988-2-4:2012 Plasma display panels - Part 2-4 : measuring methods - Visual quality : image artifacts
  • NF EN 61988-2-4:2012 Panneaux d'affichage à plasma - Partie 2-4 : méthodes de mesure - Qualité visuelle : artéfacts d'image
  • NF C83-150:1981 Harmonized system of quality assessment for electronic components. Sectional specification. Polyester film dielectric capacitors.
  • NF EN 61988-2-3:2010 Panneaux d'affichage à plasma - Partie 2-3 : méthodes de mesure - Qualité d'image : défauts et dégradation
  • NF ISO 14237:2010 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Dosage des atomes de bore dans le silicium à l'aide de matériaux dopés uniformément
  • NF C83-113:1981 Harmonized system of quality assessment for electronci components. Sectional specification. Tantalum chip capacitors.
  • NF EN 62197-1:2006 Connecteurs pour équipements électroniques - Exigences d'assurance de la qualité - Partie 1 : spécification générique
  • NF C83-132:1981 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors with ceramic dielectric, class 2.
  • NF C83-120:1983 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed mica dielectric. D.C. capacitors.
  • NF C93-406-1-2*NF EN 62197-1:2006 Connectors for electronic equipment - Quality assessment requirements - Part 1 : generic specification
  • NF EN 13615:2002 Méthodes pour l'analyse des lingots d'étain - Détermination des teneurs en impuretés dans l'étain de qualité 99,90 % et 99,85 % par spectrométrie atomique

Hubei Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB42/T 1179-2016 Quality Grading of Peaches Peaches Seeds in Chinese Medicinal Materials
  • DB42/ 123-2002 Quality grading of main cultivated forage seeds

Yunnan Provincial Standard of the People's Republic of China, What about the molecular mass

Gansu Provincial Standard of the People's Republic of China, What about the molecular mass

Danish Standards Foundation, What about the molecular mass

  • DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • DS/EN 61988-2-4:2011 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts
  • DS/EN 61988-2-3:2010 Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation
  • DS/EN 62197-1:2006 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

American Society for Testing and Materials (ASTM), What about the molecular mass

  • ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM F1593-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1593-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1593-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1710-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM D2502-14(2019) Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM D2502-14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM E928-01 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
  • ASTM E928-96 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
  • ASTM E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry

TH-TISI, What about the molecular mass

  • TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
  • TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
  • TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
  • TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method
  • TIS 1762.1-1999 Surface active agents.detergents.determination of cationic-active matter content.part 1: high-molecular-mass cationic-active matter
  • TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)

Professional Standard - Water Conservancy, What about the molecular mass

BELST, What about the molecular mass

  • STB 1918-2008 Sugar. Enzymatic method for determination of mass fraction of raffinose

Guangdong Provincial Standard of the People's Republic of China, What about the molecular mass

ES-UNE, What about the molecular mass

  • UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • UNE-EN 61988-2-4:2011 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts (Endorsed by AENOR in January of 2012.)
  • UNE-EN 61988-2-3:2009 Plasma display panels -- Part 2-3: Measuring methods - Image quality: defects and degradation (Endorsed by AENOR in March of 2010.)
  • UNE-EN 62197-1:2006 Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification (Endorsed by AENOR in May of 2008.)
  • UNE-EN 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (Endorsed by AENOR in July of 2014.)
  • UNE-EN 61190-1-1:2002 Attachment materials for electronic assembly -- Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (Endorsed by AENOR in November of 2002.)

RU-GOST R, What about the molecular mass

  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
  • GOST R 54353-2011 Food common salt. Determination of sulphate-ion mass fraction by gravimetric method
  • GOST 25645.138-1986 Natural radiation belts of earth. Model of spatial and energy distribution of proton flux
  • GOST 33769-2016 Food common salt. Mercurymetric method of chlor-ion mass fraction determination
  • GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method
  • GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method

Japanese Industrial Standards Committee (JISC), What about the molecular mass

  • JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
  • JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
  • JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
  • JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
  • JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
  • JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
  • JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers

Henan Provincial Standard of the People's Republic of China, What about the molecular mass

European Committee for Standardization (CEN), What about the molecular mass

  • EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • EN ISO 2871-1:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High - Molecular-Mass Cationic-Active Matter (ISO 2871-1:1988)
  • EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
  • EN ISO 2871-2:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) (ISO 2871-2:1990)
  • EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
  • EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
  • EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method

International Telecommunication Union (ITU), What about the molecular mass

  • ITU-T Y.3806-2021 Quantum key distribution networks - Requirements for quality of service assurance

API - American Petroleum Institute, What about the molecular mass

  • API SYNTHESIS-46-1946 THE SYNTHESIS AND PROPERTIES OF HYDROCARBONS OF HIGH MOLECULAR WEIGHT-IV
  • API 951-1967 PROPERTIES OF HYDROCARBONS OF HIGH MOLECULAR WEIGHT SYNTHESIZED BY RESEARCH PROJECT 42 OF THE AMERICAN PETROLEUM INSTITUTE

Heilongjiang Provincial Standard of the People's Republic of China, What about the molecular mass

国家市场监督管理总局、中国国家标准化管理委员会, What about the molecular mass

  • GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • GB/T 40442-2021 Paper, board and pulps—Determination of weight factor in fibre furnish analysis

Lithuanian Standards Office , What about the molecular mass

  • LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
  • LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • LST EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

AENOR, What about the molecular mass

  • UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
  • UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • UNE-EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

Professional Standard - Post and Telecommunication, What about the molecular mass

  • YD/T 678-1994 Quality grading criteria of electronic teleprinters

International Electrotechnical Commission (IEC), What about the molecular mass

  • IEC 62899-402-1:2017 Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width
  • IEC TR 62899-402-4:2021 Printed electronics - Part 402-4: Printability - Measurement of qualities - Classification and measurement methods for morphology
  • IEC 62899-402-2:2020 Printed electronics - Part 402-2: Printability - Measurement of qualities - Edge waviness
  • IEC 61988-2-3:2009 Plasma display panels - Part 2-3: Measuring methods - Image quality: Defects and degradation
  • IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
  • IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • IEC 62197-1:2006 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification
  • QC 001002-4 AMD 1-2004 IEC Quality assessment system for Electronic Components (IECQ) - Rules of procedure - Part 4: Avionics assessment program requirements

Professional Standard - Hygiene , What about the molecular mass

  • WS 340-2011 Quality standards for excimer laser corneal refractive surgery

Professional Standard - Energy, What about the molecular mass

  • NB/T 11251-2023 Cultivation and quality classification of Litsea cubeba seedlings for energy use

CZ-CSN, What about the molecular mass

  • CSN 75 7400-1998 Water quality - Determination of silver by atomic absorption spectrometric methods
  • CSN ISO 665:1994 Oilseeds.Determination of moisture and volatile matter content.

Indonesia Standards, What about the molecular mass

  • SNI 19-7119.8-2005 Ambient atmospheres - Part 8: Test methods of oxidant content by neutral buffer potassium iodide using spectrophotometers
  • SNI 06-2513-1991 Water, Test methods for chromium content by carbon stove atomic absorption spectrophotometer apparatus
  • SNI 06-2515-1991 Water, Test method for copper content by atomic absorption spectrophotometer in an extraction manuver
  • SNI 06-2472-1991 Test methods for cobalt content in water by carbon stoves atomic absorption spectrophotometer apparatus
  • SNI 06-2516-1991 Water, Test method for copper content by carbon stove atomic absorption spectrophotometer apparatus

SE-SIS, What about the molecular mass

  • SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers

KR-KS, What about the molecular mass

  • KS C IEC 62899-402-1-2020 Printed electronics — Part 402-1: Printability —Measurement of qualities — Pattern width
  • KS D ISO 14595-2018(2023) Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials(CRMs)
  • KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
  • KS I ISO 14154-2016 Soil quality－Determination of some selected chlorophenols－ Gas-chromatographic method with electron-capture detection

工业和信息化部, What about the molecular mass

  • YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
  • YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
  • YS/T 870-2020 Chemical Analysis Methods for Pure Aluminum Determination of Trace Impurity Element Contents Inductively Coupled Plasma Mass Spectrometry

National Metrological Technical Specifications of the People's Republic of China, What about the molecular mass

  • JJF 1029-1991 The Technical Norm for Development of Certified Reference Materied Used in Quantitative Analysis of Electron Microprobe

Beijing Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB11/T 323.1-2005 Quality standard of medicinal materials seed Part 1：American ginseng

NO-SN, What about the molecular mass

  • NS 2802-1999 Fruits - Plums - Quality, grading, packaging and marking (Corrigendum AC:2000 incorporated)

Shaanxi Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB/6100 B61 022-1988 Seed quality grading standard of main afforestation tree species in Shaanxi Province
  • DB61/T 1158.6-2018 Phellinus Standard Complex Part 6: Quality Requirements for Dried Fruiting Bodies

US-CLSI, What about the molecular mass

  • CLSI MM20-A-2012 Quality Management for Molecular Genetic Testing; Approved Guideline

ZA-SANS, What about the molecular mass

  • SANS 1838-1:2007 Electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities Part 1: Non-automatic mass measuring equipment for static mass measurement
  • SANS 6777:1984 Water quality - Determination of nitrite - Molecular absorption spectrometric method
  • SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water

Zhejiang Provincial Standard of the People's Republic of China, What about the molecular mass

  • DB33/ 395.3-2003 Pollution-free Portunus trituberculatus Part 3: Product Quality Standards

国家认证认可监督管理委员会, What about the molecular mass

  • RB/T 129-2022 Implementation Guidelines for Inter-Department Quality Assessment Project in Clinical Molecular Pathology

YU-JUS, What about the molecular mass

  • JUS C.A1.546-1990 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determi- natlon of chromium In ctmtents from 0,01 to 2 % (m/m)

VN-TCVN, What about the molecular mass

  • TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry
  • TCVN 4801-1989 Oilseed residues.Determination of moisture and volatile matter content

Military Standard of the People's Republic of China-General Armament Department, What about the molecular mass

  • GJB 3781-1999 Requirements for classifying and coding of quality and reliability data for electronic system
  • GJB 8699.5-2015 Aerial bomb test methods Part 5: General detection of mass and center of mass position electronic detection method

IECQ - IEC: Quality Assessment System for Electronic Components, What about the molecular mass

  • PQC 27-1984 Switches for Use in Electronic Equipment: Sectional Specification: Sensitive Switches of Assessed Quality
  • PQC 28-1984 Switches for Use in Electronic Components: Sectional Specification: Rotary Switches of Assessed Quality

NL-NEN, What about the molecular mass

  • NEN-ISO 7627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
  • NEN-ISO 7627-4:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
  • NEN-ISO 7627-5:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)

European Committee for Electrotechnical Standardization（CENELEC）, What about the molecular mass

  • EN 61988-2-4:2011 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts
  • EN 61988-2-3:2009 Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation

Professional Standard - Non-ferrous Metal, What about the molecular mass

  • YS/T 244.9-2008 Chemical analysis methods of high purity aluminum.Part 9: Determination of trace impurities in high purity aluminumby inductively coupled mass spectrometry

IEC - International Electrotechnical Commission, What about the molecular mass

  • TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, What about the molecular mass

  • GJB 5496.5-2005 Test method of aerial bomb Part 5:General inspection-Electronic test method-Mass mass center location

IN-BIS, What about the molecular mass

GOSTR, What about the molecular mass

  • GOST R IEC 61190-1-1-2020 Materials for electronic modules. Part 1-1. Requirements for soldering fluxes for high-quality interconnections in electronics assembly

CENELEC - European Committee for Electrotechnical Standardization, What about the molecular mass

  • EN 61190-1-2:2002 Attachment Materials for Electronic Assembly Part 1-2: Requirements for Solder Pastes for High-Quality Interconnections in Electronic Assembly

Professional Standard - Geology, What about the molecular mass

  • DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry

ES-AENOR, What about the molecular mass

  • UNE 36-371 Pt.4-1986
  • UNE 55-807-1991 Surface active agents. Technical alkane sulfonates. Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content

RO-ASRO, What about the molecular mass

  • STAS 6908/3-1990 Gaseous hydroc arbcrs. Hydrogen sulph. Buffers. Shapes and dimensions

Standard Association of Australia （SAA）, What about the molecular mass

  • AS ISO 22048:2006 Surface chemical analysis - Information format for static secondary-ion mass spectrometry

  Molecular mass of pyrene, Molecular mass, Molecular mass, Molecular mass of indium, mass spec molecular mass, Determination of molecular mass, molecular quality control, how to calculate molecular mass, Molecular mass content, mass molecular mass, Molecular mass, Molecular mass 42, Phenol Molecular Mass, mass molecule, Bismuth Molecular Mass, Molecular mass of sulfuric acid, What about the molecular mass, Bismuth Molecular Mass, Molecular mass fraction, ion molecular mass.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved