ZH
RU
ES
Microscope Objective Lens Performance
Microscope Objective Lens Performance, Total:343 items.
In the international standard classification, Microscope Objective Lens Performance involves: Optical equipment, Screw threads, Fasteners, Optics and optical measurements, Geology. Meteorology. Hydrology, Animal feeding stuffs, Vocabularies, Optoelectronics. Laser equipment, Linear and angular measurements, Water quality, Products of the textile industry, Testing of metals, Hydraulic fluids, Protection against crime, Analytical chemistry, Insulating fluids, Surface treatment and coating, Paints and varnishes, Electrical equipment for working in special conditions, Microbiology, Aerospace fluid systems and components, Cinematography, Metrology and measurement in general, Raw materials for rubber and plastics, Ceramics, Coals, Medical sciences and health care facilities in general, Fluid power systems, Plastics, Electronic display devices, Paper and board, Iron and steel products, Textile fibres.
Japanese Industrial Standards Committee (JISC), Microscope Objective Lens Performance
British Standards Institution (BSI), Microscope Objective Lens Performance
- BS 7012-10.2:1997 Light microscopes - Minimum requirements for stereo microscopes - High performance microscopes
- BS ISO 19012-2:2010 Optics and photonics. Designation of microscope objectives. Chromatic correction
- BS ISO 19012-2:2013 Microscopes. Designation of microscope objectives. Chromatic correction
- BS ISO 8038:2013 Microscopes. Screw threads for objectives and related nosepieces
- BS ISO 19012-1:2013 Microscopes. Designation of microscope objectives. Flatness of field/Plan
- BS ISO 8578:2012 Microscopes. Marking of objectives and eyepieces
- 23/30444981 DC BS ISO 19012-4. Microscopes. Designation of microscope objectives - Part 4. Polarization characteristics
- BS 7012-15:1997 Light microscopes - Marking of objectives and eyepieces
- BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
- BS ISO 21073:2019 Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS ISO 11884-2:2007 Optics and photonics. Minimum requirements for stereomicroscopes. High performance microscopes
- BS 7012-4.1:1998 Light microscopes - Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in)
- 18/30339977 DC BS ISO 21073. Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS ISO 18221:2016 Microscopes. Microscopes with digital imaging displays. Information provided to the user regarding imaging performance
- BS ISO 19056-2:2019 Microscopes. Definition and measurement of illumination properties - Illumination properties related to the colour in bright field microscopy
- BS 7011 Sec.2.1:1989 Consumable accessories for light microscopes. Slides. Specification for dimensions and optical properties
- BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
- BS ISO 8255-1:2017 Tracked Changes. Microscopes. Cover glasses. Dimensional tolerances, thickness and optical properties
- BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
- 18/30339980 DC BS ISO 19056-2. Microscopes. Definition and measurement of illumination properties. Part 2. Illumination properties related to the colour in bright field microscopy
- BS EN 50353:2001 Insulating oil - Determination of fibre contamination by the counting method using a microscope
- BS ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- 21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
- BS ISO 8255-1:2011 Microscopes. Cover glasses. Dimensional tolerances, thickness and optical properties
- BS EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- BS EN ISO 1463:2021 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- BS EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Test methods for wavefront aberrations
- BS EN ISO 14880-1:2016 Optics and photonics. Microlens arrays. Vocabulary and general properties
- BS 7011-0:1989 Consumable accessories for light microscopes. General introduction
- 19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- BS DD CEN/TS 843-6:2004 Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Guidance for fractographic investigation
- BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS 7011-2.1:1989 Consumable accessories for light microscopes - Slides - Specification for dimensions and optical properties
- 20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- BS EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
- 20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique)
- PD ISO/TS 22292:2021 Nanotechnologies. 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- BS ISO 17751:2007 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends
- 21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- BS ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Microscope Objective Lens Performance
- GB/T 2609-2015 Microscopes.Objectives
- GB/T 2609-2006 Microscope.Objectives
- GB/T 2609-1996 Microscope--Objectives
- GB 2609-1981 Object lens for microscopes series
- GB/T 19864.2-2005 Stereomicroscopes.Part 2:High performance microscopes
- GB/T 19864.2-2013 Stereomicroscopes.Part 2 : High performance microscopes
- GB/T 22056-2008 Microscopes-Marking of objectives and eyepieces
- GB/T 2985-1999 Biological microscope
- GB/T 2985-2008 Biological microscope
- GB/T 42886-2023 Microscope digital imaging displays information about the imaging performance of the microscope to the user
- GB/T 22055.2-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 2:Screw thread type M25×0.75mm
- GB/T 22055.1-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 1:Screw thread type RMS(4/5in×1/36in)
- GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
- GB/T 17507-1998 General specification of thin biological standards for X-Ray-Ray EDS microanalysis in electron microscope
- GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
- GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
- GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
- GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
- GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
- GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
- GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
- GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
- GB/T 28044-2011 General guide of detection method for nanomaterial biological effect by transmission electron microscope (TEM)
- GB/T 2679.11-2008 Paper and board.Qualitative analysis of mineral filler and mineral coating.SEM/EDAX Method
- GB/T 2679.11-1993 Paper and board. Qualitative analysis of mineral filler and mineral coating. SEM/EDAX method
- GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
Korean Agency for Technology and Standards (KATS), Microscope Objective Lens Performance
- KS B 5615-1997 Biological microscope objectives
- KS B 5615-2016 Biological microscope objectives
- KS B 5615-2016(2021) Biological microscope objectives
- KS B 5616-2013 Biological microscope eyepieces
- KS B 5616-1981 Biological Microscope Eyepieces
- KS B 5616-2018 Biological microscope eyepieces
- KS B 5617-2013 Stage micrometer for biological microscope
- KS B 5617-1993 Stage micrometer for biological microscope
- KS B ISO 8578:2006 Optics and optical instruments-Microscopes-Marking of objectives and eyepieces
- KS B ISO 8578:2016 Optics and optical instruments－Microscopes－Marking of objectives and eyepieces
- KS B ISO 19012-1:2011 Optics and photonics-Designation of microscope objectives-Part 1:Flatness of field/Plan
- KS B ISO 19012-1:2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
- KS B 5611-2004 Biological microscopes for dry objectives
- KS B 5611-1987 Biological microscopes for dry objectives
- KS B 5605-1987 Biological Microscopes for Immersion Objectives
- KS B 5618-1993 Net stage micrometer for biological microscope
- KS B 5618-2013 Net stage micrometer for biological microscope
- KS B 5604-1989 Medium Size Biological Microscopes
- KS B 5612-2004 Small size biological microscopes
- KS B 5604-1989(2021) Medium Size Biological Microscopes
- KS B 5604-1978 Medium Size Biological Microscopes
- KS B 5611-2019 Biological microscopes for dry objectives
- KS B ISO 11884-2-2011(2016) Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
- KS B ISO 11884-2-2011(2021) Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
- KS B 5612-2019 Small size biological microscopes
- KS B ISO 8578-2016(2021) Optics and optical instruments－Microscopes－Marking of objectives and eyepieces
- KS B ISO 11884-2:2011 Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
- KS B 5604-1989(2016) Medium Size Biological Microscopes
- KS B 5605-2015(2020) Biological Microscopes for Immersion Objectives
- KS B 5618-2018 Net stage micrometer for biological microscope
- KS B 5617-2018 Stage micrometer for biological microscope
- KS B ISO 8038-1:2006 Optics and optical instruments－Microscopes－Screw threads for objectives and related nosepieces－Part 1：Screw thread type RMS(4/5 in×1/36 in)
- KS B ISO 8038-2:2006 Optics and optical instruments－Screw threads for microscope objectives and related nosepieces－Part 2：Screw thread type M25×0.75 mm
- KS B ISO 19012-1-2016(2021) Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
- KS B ISO 8038-2-2006(2016) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm
- KS B ISO 8038-2-2006(2021) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm
- KS D 8519-2009 Metallic and oxide coating-Measurement of coating thickness-Microscopical method
- KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
- KS E 4005-2007(2012) Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
- KS E 4005-1981 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
- KS B ISO 8038-1-2006(2021) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 1: Screw thread type RMS(4/5 in×1/36 in)
- KS B ISO 8038-1-2006(2016) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 1: Screw thread type RMS(4/5 in×1/36 in)
- KS E 4005-2007 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
- KS M ISO 3146:2012 Plastics-Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
- KS B ISO 14880-2:2013 Optics and photonics ― Microlens arrays ― Part 2: Test methods for wavefront aberrations
- KS B ISO 14880-2:2008 Optics and photonics-Microlens arrays-Part 2:Test methods for wavefront aberrations
- KS K ISO 17751:2009 Textiles－Quantitative analysis of animal fibres by microscopy－Cashmere, wool, speciality fibres and their blends
International Organization for Standardization (ISO), Microscope Objective Lens Performance
- ISO/DIS 19012-4 Microscopes — Designation of microscope objectives — Part 4: Polarization characteristics
- ISO 8038:2013 Microscopes.Screw threads for objectives and related nosepieces
- ISO 8578:2012 Microscopes - Marking of objectives and eyepieces
- ISO 19012-2:2013 Microscopes - Designation of microscope objectives - Part 2: Chromatic correction
- ISO 21073:2019 Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging
- ISO 19012-1:2011 Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 19012-1:2013 Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
- ISO 19012-3:2015 Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
- ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces
- ISO 8038:1985 Optics and optical instruments; Microscopes; Screw thread for objectives
- ISO 11884-2:2007 Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
- ISO/CD 18221:2023 Microscopes — Microscopes with digital imaging displays — Information provided to the user regarding imaging performance
- ISO 18221:2016 Microscopes - Microscopes with digital imaging displays - Information provided to the user regarding imaging performance
- ISO 8578:1997/Cor 1:2002 Optics and optical instruments - Microscopes - Marking of objectives and eyepieces; Technical Corrigendum 1
- ISO 19012-2:2009 Optics and photonics - Designation of microscope objectives - Part 2: Chromatic correction
- ISO 8038-2:2001 Optics and optical instruments - Screw threads for microscope objectives and related nosepieces - Part 2: Screw thread type M25 x 0,75 mm
- ISO 19056-3:2022 Microscopes — Definition and measurement of illumination properties — Part 3: Incident light fluorescence microscopy with incoherent light sources
- ISO 19056-2:2019 Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy
- ISO 19012-1:2007 Optics and photonics - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- ISO 14880-1:2001/Cor 1:2003 Microlens array - Part 1: Vocabulary; Technical Corrigendum 1
- ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- ISO 14880-1:2016 Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties
- ISO 1463:1973 Title missing - Legacy paper document
- ISO 1463:1982 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method
- ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- ISO 8037-1:1986 Optics and optical instruments; Microscopes; Slides; Part 1 : Dimensions, optical properties and marking
- ISO 8255-1:2011 Microscopes - Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties
- ISO 8255-1:2017 Microscopes - Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties
- ISO 8255-1:1986 Optics and optical instruments; Microscopes; Cover glasses; Part 1 : Dimensional tolerances, thickness and optical properties
- ISO 14880-1:2001/Cor 2:2005 Optics and photonics - Microlens arrays - Part 1: Vocabulary; Technical Corrigendum 2
- ISO 4407:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the counting method using a microscope
- ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
- ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
- ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
- ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 17751:2007 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends
- ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
- ISO/TS 22292:2021 Nanotechnologies — 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
American National Standards Institute （ANSI), Microscope Objective Lens Performance
American Society of Mechanical Engineers (ASME), Microscope Objective Lens Performance
Professional Standard - Machinery, Microscope Objective Lens Performance
- JB/T 7398.3-1994 Microscope Objective Thread
- JB/T 7398.7-1994 Microscope - Revolving nosepiece
- JB/T 7398.1-1994 Symbols for Microscope Objectives and Eyepieces
- JB/T 7398.13-1994 Specimens slides for microscopes and biological microscopes
- JB/T 5479-1999 Fluorescence microscope
- JB/T 7811-1995 Technical delivery conditions for popular biological microscopes
- JB/T 9426.6-2011 Lenses for motion picture camera.Part 6:Method for determining various functions of lenses for motion picture camera
- JB/T 8230.7-1999 Microscopes.Dimensions and positions of holes for stage clips and attachable mechanical stage on microscope stage
- JB/T 9409-2010 Method for determining various functions of motiaon-picture projection lenses
机械工业部, Microscope Objective Lens Performance
国家市场监督管理总局、中国国家标准化管理委员会, Microscope Objective Lens Performance
- GB/T 22056-2018 Microscopes—Marking of objectives and eyepieces
- GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
RU-GOST R, Microscope Objective Lens Performance
- GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions
- GOST 11200-1975 Objectives and body-tubes of the microscopes. Attaching dimensions
- GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
- GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
- GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
- GOST 8.003-2010 State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure
- GOST R 8.636-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
- GOST 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification
- GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
American Society for Testing and Materials (ASTM), Microscope Objective Lens Performance
- ASTM E210-63(2005) Standard Specification for Microscope Objective Thread
- ASTM E210-63(2010) Standard Specification for Microscope Objective Thread
- ASTM E2382-04 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D1245-84(2003) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM E2228-10 Standard Guide for Microscopic Examination of Textile Fibers
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D1245-84(1999) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-84(2007) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-17 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-08 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-11 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D3849-13 Standard Test Method for Carbon Blackmdash;Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM D3849-14 Standard Test Method for Carbon Blackmdash;Morphological Characterization of Carbon Black Using Electron Microscopy
- ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
- ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
- ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
- ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
- ASTM D5596-94 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM D5596-03 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM D5596-03(2009) Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
Association Francaise de Normalisation, Microscope Objective Lens Performance
- NF S10-500*NF ISO 21073:2020 Microscopes - Confocal microscopes - Optical data of fluorescence confocal microscopes for biological imaging
- NF ISO 21073:2020 Microscopes - Microscopes confocaux - Données optiques des microscopes confocaux à fluorescence pour l'imagerie biologique
- NF S10-132-1:2005 Microlens array - Part 1 : vocabulary.
- NF T30-123:1974 Paints. Determination of dry film thickness. Microscope methods.
- NF S10-132-1:2016 Optics and photonics - Microlens arrays - Part 1 : vocabulary and general properties
- NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
- NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- NF A91-110:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.
- NF T90-379*NF EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
- NF S10-132-2*NF EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations
- NF EN 15204:2006 Qualité de l'eau - Norme guide pour le dénombrement du phytoplancton par microscopie inversée (méthode Utermöhl)
- NF B41-206-6*NF EN 843-6:2009 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6 : guidance for fractographic investigation
- NF T70-360:2007 Energetic materials for defence - Physico-chemical analyses and properties - Measurement of the penetration depth of plasticizers and/or deterrents - Method by microscopy
- NF G07-142:2009 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends.
- NF S10-132-4*NF EN ISO 14880-4:2006 Optics and phonotics - Microlens arrays - Part 4 : test methods for geometrical properties.
Military Standards (MIL-STD), Microscope Objective Lens Performance
Group Standards of the People's Republic of China, Microscope Objective Lens Performance
National Metrological Technical Specifications of the People's Republic of China, Microscope Objective Lens Performance
Guangdong Provincial Standard of the People's Republic of China, Microscope Objective Lens Performance
KR-KS, Microscope Objective Lens Performance
- KS B ISO 8578-2016 Optics and optical instruments－Microscopes－Marking of objectives and eyepieces
- KS B ISO 19012-1-2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
- KS B ISO 8038-2-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 2: Screw thread type M25 × 0.75 mm
- KS B ISO 8038-1-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS(4/5 in × 1/36 in)
HU-MSZT, Microscope Objective Lens Performance
Professional Standard - Water Conservancy, Microscope Objective Lens Performance
CZ-CSN, Microscope Objective Lens Performance
- CSN 72 1084-1974 Methodics of pyrogenic microscopy of anorganic substances
- CSN 75 7711-1987 Water Quality Microscopical biological qualitative and quantitative analysis
- CSN 75 7712-1998 Water quality - Biological analysis - Determination of bioseston
Professional Standard - Commodity Inspection, Microscope Objective Lens Performance
- SN/T 0297-1993 Rules for inspection of biologicalmicroscop for export
- SN/T 3129.2-2013 Rules for the inspection of optical instruments for import and export.Part 2:Biological microscopes
- SN/T 2731-2010 Identification of asbestos in nonmetal minerals.X-radial diffraction instrument-microscope observation method
国家进出口商品检验局, Microscope Objective Lens Performance
- SN 0297-1993 "Export Biological Microscope Inspection Regulations"
农业农村部, Microscope Objective Lens Performance
- NY/T 3002-2016 Microscopy method for detection of animal-derived components in feed
PT-IPQ, Microscope Objective Lens Performance
- NP 452-1986 Microbiologie alimentaire. Laits. Examen microscopique du sédlment
Shanxi Provincial Standard of the People's Republic of China, Microscope Objective Lens Performance
- DB14/T 1965-2019 Technical Regulations for Microscopic Determination of Density of Woven Fabrics
IN-BIS, Microscope Objective Lens Performance
SE-SIS, Microscope Objective Lens Performance
- SIS 11 11 11-1974 Methods for assessing the slag inclusion content in steel. Microscopic methods
- SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections
RO-ASRO, Microscope Objective Lens Performance
- STAS 5949-1980 DRTRRMINATION OF NON-METALIC STEELS Microscopie method
- STAS 1456/2-1974 Steels for rolling bearings DETERMINATION OF BANDED CARBIDES Microscopical method
- STAS 7856-1967
- STAS SR ISO 8037-1:1995 Optics and optical instruments Microscopes - Slides Part 1: Dimensions, optical properties and marking
- STAS SR ISO 8255-1:1995 Optics and optical instruments Microscopes — Cover glasses Part 1: Dimensional tolerances, thickness and optical properties
- SR ISO 4407:1991 Hydraulic fluid power -Fluid contamination - Determinatidn of particulate contamination by the counting method using a microscope
Taiwan Provincial Standard of the People's Republic of China, Microscope Objective Lens Performance
- CNS 2910-2008 Microscopic testing method for non-metallic inclusions in steel
- CNS 2910-1986 Microscopic Testing Method for the Non-Metallic Inclusions in Steel
Danish Standards Foundation, Microscope Objective Lens Performance
- DS/ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- DS/ISO 1463:1983 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- DS/EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
- DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
Professional Standard - Construction Industry, Microscope Objective Lens Performance
- JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
Professional Standard - Public Safety Standards, Microscope Objective Lens Performance
- GA/T 1659-2019 Forensic Science Cashmere Fiber Inspection Biomicroscopy
- GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
- GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
- GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
- GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1936-2021 Forensic Science Chemical Fiber Evidence Cross Section Shape Examination Microscopy
- GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
- GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Microscope Objective Lens Performance
- GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
- GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
Professional Standard - Judicatory, Microscope Objective Lens Performance
German Institute for Standardization, Microscope Objective Lens Performance
- DIN ISO 8038-2:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M 25 x 0,75 mm (ISO 8038-2:2001);English version of DIN ISO 8038-2:2006
- DIN ISO 8038-1:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5 in x 1/36 in) (ISO 8038-1:1997);English version of DIN ISO 8038-1:2006
- DIN EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
- DIN 58959-4:1997 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes
- DIN ISO 8037-1:2003 Optics and optical instruments - Microscopes; Slides - Part 1: Dimensions, optical properties and marking (ISO 8037-1:1986)
- DIN 58943-32:1995 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods
- DIN EN 15204:2006-12 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique); German version EN 15204:2006
- DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
- DIN EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006); English version of DIN EN ISO 14880-2:2007-03
Professional Standard - Environmental Protection, Microscope Objective Lens Performance
- HJ 1215-2021 Determination of water quality phytoplankton filter membrane-microscopic counting method
- HJ 1216-2021 Determination of water quality phytoplankton 0.1 ml counting frame-microscopic counting method
AENOR, Microscope Objective Lens Performance
- UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.
- UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- UNE-EN 15204:2007 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
European Committee for Standardization (CEN), Microscope Objective Lens Performance
- EN ISO 14880-1:2019 Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
- EN ISO 14880-1:2005 Optics and photonics - Microlens array - Part 1: Vocabulary
- EN ISO 1463:1994 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method (ISO 1463 : 1982)
- EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- EN ISO 3146:1997 Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers ISO 3146: 1985
- EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
- EN ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
- EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm?hl technique)
ZA-SANS, Microscope Objective Lens Performance
- SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
YU-JUS, Microscope Objective Lens Performance
- JUS C.A6.031-1990 Metal11c and oxid coatlngs. tteasurement of coatlng thickness. Hicroscopical method
PL-PKN, Microscope Objective Lens Performance
- PN C05551-1987 Water and waste water Determination of the phytoplankton ?uantity by using the inverted microscope
ES-UNE, Microscope Objective Lens Performance
- UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
NZ-SNZ, Microscope Objective Lens Performance
Society of Automotive Engineers (SAE), Microscope Objective Lens Performance
- SAE AS598-2012 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
未注明发布机构, Microscope Objective Lens Performance
- SAE AS598A-2081 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
SAE - SAE International, Microscope Objective Lens Performance
- SAE AS598A-2018 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
GOSTR, Microscope Objective Lens Performance
- GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Microscope Objective Lens Performance
- GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
- GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
Military Standard of the People's Republic of China-General Armament Department, Microscope Objective Lens Performance
- GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
- GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
Lithuanian Standards Office , Microscope Objective Lens Performance
- LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- LST EN 15204-2007 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
AT-ON, Microscope Objective Lens Performance
- OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
CH-SNV, Microscope Objective Lens Performance
- SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
Standard Association of Australia （SAA）, Microscope Objective Lens Performance
- AS 1766.3.10:1994 Food microbiology Method 3.10:Examination for specific products - Liquid milks - Direct microscopic count
Professional Standard - Agriculture, Microscope Objective Lens Performance
NO-SN, Microscope Objective Lens Performance
- NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections
ESDU - Engineering Sciences Data Unit, Microscope Objective Lens Performance
- SPB-M2-1-2007 Interfacial and rheological properties of asphaltenes studied by atomic force microscopy.
International Electrotechnical Commission (IEC), Microscope Objective Lens Performance
- IEC 63145-20-10:2019 Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties