ZH
RU
ES
Mercury injection test
Mercury injection test, Total:499 items.
In the international standard classification, Mercury injection test involves: Products of the chemical industry, Dentistry, Non-ferrous metals, Analytical chemistry, Inorganic chemicals, Fuels, Water quality, Organic chemicals, Crude petroleum, Plastics, Testing of metals, Installations in buildings, Semiconducting materials, Electrical and electronic testing, Fluid storage devices, Coals, Non-destructive testing, Fluid power systems, Earthworks. Excavations. Foundation construction. Underground works, Mechanical testing, Pumps, Transformers. Reactors, Aerospace fluid systems and components, Compressors and pneumatic machines, Paints and varnishes, Wastes, Environmental testing, Electrical accessories, Electromechanical components for electronic and telecommunications equipment, Kitchen equipment, Domestic, commercial and industrial heating appliances, Burners. Boilers, Elements of buildings, Freight distribution of goods, Electric road vehicles, Electronic tubes, Electrical engineering in general, Equipment for the chemical industry, Rubber and plastics products, Paper and board, Semi-manufactures of timber, Adhesives, Hand-held tools, Products of the textile industry, Power transmission and distribution networks, Woodworking equipment, Chipless working equipment, Measurement of force, weight and pressure, Wood, sawlogs and sawn timber, Construction materials, Packaging materials and accessories, Pipeline components and pipelines, Valves, Industrial automation systems, Refrigerating technology, Air quality, Welding, brazing and soldering, Road engineering, Construction equipment, Shipbuilding and marine structures in general, Soil quality. Pedology, Leather technology, Refractories, Protection against fire, Powder metallurgy, Surface treatment and coating, Diagnostic, maintenance and test equipment, Gears, Road vehicle systems, Iron and steel products, Structures of buildings, Tyres, Special purpose vehicles, Ceramics, Protection against dangerous goods, Fasteners, Hydraulic fluids, Corrosion of metals, Insulation, Protective equipment, Electricity. Magnetism. Electrical and magnetic measurements.
国家市场监督管理总局、中国国家标准化管理委员会, Mercury injection test
- GB/T 37355-2019 Test method of mercury removal rate for activated carbon mercury removal catalyst
- GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
- GB/T 23711.6-2019 Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
- GB/T 19934.1-2021 Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method
- GB/T 9251-2022 Methods for hydrostatic test of gas cylinders
- GB/T 37399-2019 Test methods for high voltage shore connection system
HU-MSZT, Mercury injection test
Taiwan Provincial Standard of the People's Republic of China, Mercury injection test
YU-JUS, Mercury injection test
Korean Agency for Technology and Standards (KATS), Mercury injection test
American Society for Testing and Materials (ASTM), Mercury injection test
- ASTM B154-16(2022) Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM B154-16 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM E506-17 Standard Test Method for Mercury in Liquid Chlorine
- ASTM E506-98 Standard Test Method for Mercury in Liquid Chlorine
- ASTM E506-98(2003) Standard Test Method for Mercury in Liquid Chlorine
- ASTM E506-17a Standard Test Method for Mercury in Liquid Chlorine
- ASTM B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM B154-12e1 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM D3223-12 Standard Test Method for Total Mercury in Water
- ASTM E506-08 Standard Test Method for Mercury in Liquid Chlorine
- ASTM D4284-07 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
- ASTM D4284-03 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
- ASTM B154-01 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
- ASTM B154-12 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM D7623-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- ASTM E538-98(2003)e1 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM E538-98 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM B154-95 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
- ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM F1392-00 Standard Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe
- ASTM D3684-01 Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
- ASTM D3684-94(2000) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
- ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM D3684-01(2006) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
- ASTM E538-17 Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM E538-17a Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM E538-98(2008) Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM D6722-11 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
- ASTM D6722-19 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
- ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM D5954-22 Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
- ASTM D5954-22a Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
- ASTM D5954-98(2014)e1 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
- ASTM E1003-05 Standard Test Method for Hydrostatic Leak Testing
- ASTM C601-85(2000) Standard Test Method for Pressure Test on Glass Pipe
- ASTM C601-85(1995)e1 Standard Test Method for Pressure Test on Glass Pipe
- ASTM C601-85(2015) Standard Test Method for Pressure Test on Glass Pipe
- ASTM D5954-98(2006) Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
- ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM D6722-01(2006) Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
- ASTM D6722-01 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
- ASTM D5954-98 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
- ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM C601-85(2010) Standard Test Method for Pressure Test on Glass Pipe
- ASTM C601-85(2005) Standard Test Method for Pressure Test on Glass Pipe
- ASTM A256-46(1982) Method of Compression Testing of Cast Iron
- ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
- ASTM D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- ASTM D7623-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- ASTM E2010-99 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
- ASTM F1052-14 Standard Test Method for Pressure Testing Vapor Protective Suits
PL-PKN, Mercury injection test
- PN C87070-06-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of mercury
- PN C87070-03-1992 Fertilizers Test of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of arsenie
- PN C87070-04-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of cadmium
- PN C87070-05-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers Determination of lead
- PN-EN 437-2021-09 E Test gases -- Test pressures -- Appliance categories
- PN C87070-01-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers General and scope of the standard
- PN H04320-1957 Static compression testing of metals
- PN E04063-08-1987 On-load tap changers Test methods Short-circuit current test
- PN E04063-09-1987 On-load tap changers Test methods Breaking capacity test
- PN E04070-11-1986 Power transformers Test methods Test of temperature rise
Professional Standard - Medicine, Mercury injection test
International Organization for Standardization (ISO), Mercury injection test
- ISO/TS 17576:2004 Dentistry - Corrosion tests for amalgam
- ISO/TS 17988:2020 Dentistry — Corrosion test methods for dental amalgam
- ISO/TS 17988:2014 Dentistry - Corrosion test methods for dental amalgam
- ISO 196:1978 Wrought copper and copper alloys; Detection of residual stress; Mercury(I) nitrate test
- ISO 10100:1990 Hydraulic fluid power; cylinders; acceptance test
- ISO 6469-3:2018 Electrically propelled road vehicles - Safety specifications - Part 3: Electrical safety
- ISO 6469-3:2018/Amd 1:2020 Electrically propelled road vehicles — Safety specifications — Part 3: Electrical safety — Amendment 1: Withstand voltage test for electric power sources
- ISO/R 202:1961 Flattening test on steel tubes
- ISO 10100:2001/Amd 1:2012 Hydraulic fluid power — Cylinders — Acceptance tests — Amendment 1
- ISO 1217:1975 Displacement compressors — Acceptance tests
- ISO 10100:2001 Hydraulic fluid power - Cylinders - Acceptance tests
- ISO 1217:2009 Displacement compressors - Acceptance tests
- ISO 1217:1986 Displacement compressors; Acceptance tests
- ISO 1217:1996 Displacement compressors - Acceptance tests
- ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
- ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
- ISO 10771-1:2015 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
- ISO 1843-4:1977 Higher alcohols for industrial use; Methods of test; Part IV : Determination of bromine number; Titrimetric method in the presence of mercury(II) chloride
- ISO 4506:1979 Hardmetals; Compression test
- ISO 3132:1975 Wood; Testing in compression perpendicular to grain
- ISO 917:1989 Testing of refrigerant compressors
- ISO 4506:2018 Hardmetals - Compression test
RU-GOST R, Mercury injection test
- GOST 33359-2015 Residual fuel oils. Test for straight-run. Determination of distillation curve at pressure of 0,133 kPa (1 mm Hg)
- GOST 4651-1982 Plastics. Compression test method
- GOST 8695-1975 Tubing. Flattening testing method
- GOST 25.503-1997 Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
- GOST 25.503-1980 Strength calculation and testing. Methods of mechanical testing of metals. Methods of compression tests
- GOST 3845-1975 Metallic tubes. Hydraulic pressure testing method
- GOST 2933-1983 Low-voltage electrical apparatus. Methods of tests
- GOST 28520-1990 Packages filled transport. Low pressure test
- GOST 32047-2012 Masonry. Method of compressive test
- GOST 4651-2014 Plastics. Compression test method
- GOST 18464-1996 Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods
- GOST 18464-1987 Hydraulic cylinders. Acceptance rules and methods of testing
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mercury injection test
Professional Standard - Military and Civilian Products, Mercury injection test
- WJ 1970-1990 Copper and copper alloy internal stress test mercury salt method
British Standards Institution (BSI), Mercury injection test
- PD ISO/TS 17988:2020 Dentistry. Corrosion test methods for dental amalgam
- BS PD ISO/TS 17988:2014 Dentistry. Corrosion test methods for dental amalgam
- BS EN ISO 196:1995 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
- BS EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Test equipment
- BS EN 61180:2016 High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements, test equipment
- BS EN 437:2003 Test gases - Test pressures - Appliance categories
- BS EN 437:2003+A1:2009 Tests gases - Test pressures - Appliance categories
- BS EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4a - Voltage proof
- BS EN ISO 12048:2001 Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
- BS 6075-10:1981 Methods of sampling and test for sodium hydroxide for industrial use - Determination of mercury content (photometric method)
- BS EN 60695-10-2:2004 Fire hazard testing - Abnormal heat - Ball pressure test
- BS EN 60695-10-2:2003 Fire hazard testing - Abnormal heat - Ball pressure test
- BS EN ISO 22282-4:2012 Geotechnical investigation and testing. Geohydraulic testing. Pumping tests
- BS ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
- BS ISO 1217:1997 Displacement compressors - Acceptance tests
- BS ISO 1217:2010 Displacement compressors. Acceptance tests
- BS ISO 1217:2009 Displacement compressors - Acceptance tests
- BS EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4c - Voltage proof of pre-insulated crimp barrels
- BS ISO 18740:2016 Turbocompressors. Performance test code. Simplified acceptance test
- BS EN ISO 22476-4:2012 Geotechnical investigation and testing. Field testing. Ménard pressuremeter test
- BS EN 13184:2001(2007) Non-destructive testing - Leak testing - Pressure change method
- BS EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
- BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
- BS EN 60060-1:2011 High-voltage test techniques. General definitions and test requirements
- BS EN 60695-10-2:2014 Fire hazard testing. Abnormal heat. Ball pressure test method
- BS EN 60060-1:2010 High-voltage test techniques. General definitions and test requirements
- HB 10210-2002 High Voltage Engineering and Testing
- BS EN 14430:2004 Vitreous and porcelain enamels - High voltage test
- BS EN ISO 2746:2015 Vitreous and porcelain enamels. High voltage test
- BS EN ISO 4506:2018 Hardmetals. Compression test
- BS EN 60068-2-39:1999 Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test
- BS EN 12390-4:2000 Testing hardened concrete - Compressive strength - Specification for testing machines
- BS EN 12390-4:2019 Testing hardened concrete - Compressive strength - Specification for testing machines
- BS EN 60060-3:2006 High voltage test techniques - Definitions and requirements for on-site tests
KR-KS, Mercury injection test
National Metrological Verification Regulations of the People's Republic of China, Mercury injection test
- JJG 386-1985 Verification Regulation of Standard Fluorescent High Pressure Mercury Vapour Lamps for Totel Lumious Flux
- JJG(粤) 043-2017 Carton compression testing machine
- JJG(粤)043-2017 Carton compression testing machine
Association Francaise de Normalisation, Mercury injection test
Hebei Provincial Standard of the People's Republic of China, Mercury injection test
- DB13/T 81.12-1991 Qualitative test method for mercury compounds in fireworks and firecrackers
Danish Standards Foundation, Mercury injection test
未注明发布机构, Mercury injection test
IT-UNI, Mercury injection test
Lithuanian Standards Office , Mercury injection test
- LST EN 14897+A1-2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
AENOR, Mercury injection test
- UNE-EN 14897:2007+A1:2009 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- UNE-EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
- UNE 103400:1993 SIMPLE COMPRESSION RUPTURE TEST IN SOIL TEST SPECIMENS.
SE-SIS, Mercury injection test
AT-ON, Mercury injection test
- ONORM M 5873-1-2001 Plants for the disinfection of water using ultraviolet radiation - Requirements and testing - Low pressure mercury lamp plants
- ONORM ISO 10100:1992 Hydraulic fluid power - Cyhnders - Acceptance test
Standard Association of Australia （SAA）, Mercury injection test
- AS 4362.2:1996(R2015)
- AS 60068.2.41:2003 Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests
- AS 60068.2.39:2003 Environmental testing - Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
- AS 2001.4.21:2006 Method of test for textiles - Colourfastness tests - Determination of colourfastness to light using an artificial light source (mercury vapour, tungsten filament, internally phosphor-coated lamp)
- AS 60068.2.67:2003 Environmental testing - Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components
- AS 2582.10:2003 Complete, filled transport packages - Methods of test - Compression and stacking tests using a compression tester
- AS 1931.1:1996 High-voltage test techniques - General definitions and test requirements
- AS 2136:1977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test
- AS 1038.10.5.1:2003 Coal and coke - Analysis and testing - Coal, coke and fly-ash - Trace elements - Determination of mercury content - Tube combustion method
- AS 2582.7:2003 Complete, filled transport packages - Methods of test - Low pressure test
- AS 60060.3:2008 High-voltage test techniques - Definitions and requirements for on-site testing
CH-SNV, Mercury injection test
European Committee for Standardization (CEN), Mercury injection test
- EN ISO 196:1995 Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury(I) Nirate Test (ISO 196 : 1978)
- EN 10275:1999 Metallic materials - Tube ring hydraulic pressure test
- HD 323.2.13 S1-1987 Basic environmental testing procedures; part 2: tests; test M: low air pressure
- EN 14430:2004 Vitreous and porcelain enamels - High voltage test
- EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
Japanese Industrial Standards Committee (JISC), Mercury injection test
- JIS Z 2342:2022 Methods for acoustic emission testing of pressure vessels during pressure tests
- JIS Z 2342:1991 Methods for acoustic emission testing of pressure vessels during pressure test
- JIS C 0029:1989 Basic environmental testing procedures Part 2: Tests, Test M: Low air pressure
- JIS B 6548:1991 Hot presses -- Test and inspection methods
- JIS B 8341:2008 Displacement compressors -- Acceptance tests
- JIS C 60068-2-41:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests
- JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS C 0031:1995 Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests
- JIS C 5402-4-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-1: Voltage stress tests -- Test 4a: Voltage proof
- JIS B 8283:1993 Pressure and leak tests for pressure vessels
- JIS C 60068-2-13:1989 Basic environmental testing procedures Part 2: Tests, Test M: Low air pressure
- JIS P 8126:1994 Method of test for ring crush of paperboard
- JIS Z 2111:1977 Method of compression test for wood
- JIS A 1217:1993 Test method for one-dimensional consolidation properties of soils
- JIS B 8377-1:2002 Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders
- JIS B 8651:2002 Test methods for electro-hydraulic proportional pressure relief valves
- JIS A 1136:2022 Method of test for compressive strength of spun concrete
Professional Standard - Water Conservancy, Mercury injection test
Professional Standard - Machinery, Mercury injection test
- JB/T 9641-1999 Testing transformers
- JB/T 11582-2013 Compression-shearing testing machines
- JB/T 5523-1991 Hydraulic spring pressure testing machine
- JB/T 7070.3-2002 Test guide for voltage regulator Part 3:Test guide for magnetic control voltage regulator
- JB/T7070.3-2002 Guidelines for Testing of Voltage Regulators Part 3: Guidelines for Testing of Magnetic Voltage Regulators
- JB/T 7083-1993 Impulse voltage testing instruments for low voltage apparatus
- JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
- JB/T 7796-2005 Tension and compression spring testing machines
- JB/T 6871-1993 Reliability test method of hydraulic universal testing machine
- JB/T 7070.2-2002 Test guide for regulator Part 2:Test guide for induction voltage regulators and automatic induction voltage regulators
- JB/T 7070.1-2002 Test guide for regulator Part 1:Test guide for variable regulators and automatic variable regulators
- JB/T 7069-2004 Test guide for pressure relief devices for transformers
- JB/T 7069-1993 Guidelines for testing pressure relief valves for transformers
Society of Automotive Engineers (SAE), Mercury injection test
- SAE AMS2606E-1991 Pressure Testing, 70 psi
- SAE AMS2605D-1991 Pressure Testing, 55 psi
- SAE AMS2602D-1991 Pressure Testing, 25 psi
- SAE AMS2607D-1991 Pressure Testing, 100 psi
- SAE AMS2615F-2006 Pressure Testing, Hydraulic Pressure as Specified [Replaced: SAE AMS 2616E, SAE AMS 2616D, SAE AMS 2620E, SAE AMS 2620D, SAE AMS 2625E, SAE AMS 2625D] [Superseded: SAE MAM 2615B, SAE MAM 2615A, SAE MAM 2616C, SAE MAM 2616B]
- SAE J643-2000 Hydrodynamic Drive Test Code
- SAE J643-2011 Hydrodynamic Drive Test Code
- SAE J1333-2015 Hydraulic Cylinder Rod Corrosion Test
Professional Standard - Chemical Industry, Mercury injection test
- HGB 4028-1960 static compression test
- HGB 4025-1960 multiple compression test
- HG/T 2186-2012 Test method of water pressure for tyres
- HG/T 2186-1991 Tire hydrostatic test method
- HG/T 4089～4093-2022 Plastic lining equipment hydrostatic test method, electric spark test method, temperature resistance test method, thermal expansion and contraction test method and lining negative pressure test method (2022)
工业和信息化部, Mercury injection test
European Committee for Electrotechnical Standardization（CENELEC）, Mercury injection test
- EN 60068-2-13:1999 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure
- HD 323.2.13-1987 Basic Environmental Testing Procedures Part 2: Tests Test M: Low air Pressure
German Institute for Standardization, Mercury injection test
- DIN EN 60068-2-13:2000 Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999
- DIN 50106:2023-02 Testing of metallic materials - Compression test at room temperature
- DIN 53463:1974 Testing of Laminates; Splitting Test on Laminated Sheets
- DIN EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994
- DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
- DIN EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000
- DIN EN 60068-2-40:2000 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999
- DIN EN 60068-2-41:2000 Environmental testing - Part 2: Tests; test Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41:1976 + A1:1983); German version EN 60068-2-41:1999
- DIN EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003
- DIN EN 10275:1999 Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
- DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
- DIN 50106:1978 Testing of Metallic Materials; Compression Test
- DIN 19304:2021 Testing of corrugated board - Creasings
- DIN ISO 4506:1991 Hardmetals; compression test; identical with ISO 4506:1979
- DIN EN 14430:2004 Vitreous and porcelain enamels - High voltage test; German version EN 14430:2004
- DIN 51302-2:2000-12 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
- DIN ISO/TS 17892-9:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/TS 17892-9:2004); German version CEN ISO/TS 17892-9:2004
RO-ASRO, Mercury injection test
BE-NBN, Mercury injection test
(U.S.) Ford Automotive Standards, Mercury injection test
CZ-CSN, Mercury injection test
AR-IRAM, Mercury injection test
TR-TSE, Mercury injection test
Professional Standard - Non-ferrous Metal, Mercury injection test
International Truck and Engine Corporation (ITEC), Mercury injection test
GM Daewoo, Mercury injection test
Compressed Gas Association (U.S.), Mercury injection test
- CGA C-1-2016 Methods for pressure testing compressed gas cylinders
- CGA C-1-2009 Methods for pressure testing compressed gas cylinders
VN-TCVN, Mercury injection test
International Electrotechnical Commission (IEC), Mercury injection test
- IEC 60068-2-13:1983 Environmental testing. Part 2: Tests. Test M: Low air pressure
- IEC 60068-2-13:2021 Environmental testing - Part 2-13: Tests - Test M: Low air pressure
- IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
- IEC 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests; Test 4a: Voltage proof
DE-GPVA, Mercury injection test
Professional Standard - Electron, Mercury injection test
- SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
ZA-SANS, Mercury injection test
- SANS:5558 Flattening and doubling-over and double-bend tests on copper tube
Professional Standard - Electricity, Mercury injection test
- DL/T 377-2010 The acceptance tests of high voltage direct current equipment
- DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
- DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
- DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mercury injection test
American National Standards Institute （ANSI), Mercury injection test
Group Standards of the People's Republic of China, Mercury injection test
Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Mercury injection test
National Metrological Technical Specifications of the People's Republic of China, Mercury injection test
Professional Standard - Light Industry, Mercury injection test
工业和信息化部/国家能源局, Mercury injection test
Canadian General Standards Board （CGSB), Mercury injection test
Association of German Mechanical Engineers, Mercury injection test
IN-BIS, Mercury injection test
Professional Standard - Aerospace, Mercury injection test
- QJ 1323.5-1987 Electromagnetic relay test method low pressure test
- QJ 1323.19-1987 Electromagnetic relay test method Dielectric withstand voltage test
机械电子工业部, Mercury injection test
Military Standard of the People's Republic of China-General Armament Department, Mercury injection test
- GJB 17.2-1984 Test methods for aviation wires and cables Voltage test
- GJB 771.104-1991 Gunpowder performance test methods Compressive strength test
- GJB 150.21-1987 Environmental test methods for military equipment Wind pressure test
- GJB 983.3-1990 Military rubber film test methods air tightness test and pressure test
- GJB 982.2-1990 Aviation brake tire test method burst pressure test
National Association of Pipe Fabricators (NAPF), Mercury injection test
NL-NEN, Mercury injection test
ES-AENOR, Mercury injection test
CEN - European Committee for Standardization, Mercury injection test
Professional Standard-Ships, Mercury injection test
Instrument Society of America (ISA), Mercury injection test
American Society of Mechanical Engineers (ASME), Mercury injection test
GM North America, Mercury injection test
SAE - SAE International, Mercury injection test
NO-SN, Mercury injection test
API - American Petroleum Institute, Mercury injection test
GB-REG, Mercury injection test
ISA - International Society of Automation, Mercury injection test
BELST, Mercury injection test
WRC - Welding Research Council, Mercury injection test
Professional Standard - Geology, Mercury injection test
Professional Standard - Railway, Mercury injection test
化学工业部, Mercury injection test
American Welding Society (AWS), Mercury injection test
SK-STN, Mercury injection test
- STN 63 5205-1985 Testing of rubber and plastic hoses. Testing by dynamic overpressure test
Professional Standard - Petrochemical Industry, Mercury injection test
- NB/SH/T 0846-2010 Test method for evaluating performance of hydraulic oil in high pressure piston type pump
交通运输部, Mercury injection test
- JT/T 443-2021 Hydraulic steering gear thrust hydraulic cylinder test method
Professional Standard - Building Materials, Mercury injection test
- JC/T 262-1993 Performance test method for cast stone products. Compression strength test
Professional Standard - Traffic, Mercury injection test
- JT/T 4190-1982 Technical requirements for water pressure test and steam test of marine boilers