ZH
RU
ES

Ammonia and aldehydes

Ammonia and aldehydes, Total:259 items.

In the international standard classification, Ammonia and aldehydes involves: Adhesives, Analytical chemistry, Plastics, Rubber and plastics products, Fertilizers, Organic chemicals, Water quality, Medical sciences and health care facilities in general, General methods of tests and analysis for food products, Beverages, Structures of buildings, Vocabularies, Test conditions and procedures in general, Products of the chemical industry, Wood, sawlogs and sawn timber, Furniture, Products of the textile industry, Protection against dangerous goods, Food products in general, Meat, meat products and other animal produce, Energy and heat transfer engineering in general, Footwear, Environmental protection, Paint ingredients, Paints and varnishes, Air quality, Materials and articles in contact with foodstuffs, Paper and board, Textile fibres, Bearings, Wood-based panels, Leather technology, Milk and milk products, Birth control. Mechanical contraceptives.

European Committee for Standardization (CEN), Ammonia and aldehydes

EN 1243:1998 Adhesives - Determination of Free Formaldehyde in Amino and Amidoformaldehyde Condensates
EN 1243:2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
EN ISO 11402:1998 Plastics - Condensation Resins - Determination of Free Formaldehyde ISO 11402:1993
EN ISO 120:1998 Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method
EN ISO 172:1998 Plastics - Phenol-Formaldehyde Mouldings - Detection of Free Ammonia ISO 172:1978
EN ISO 11402:2005/AC:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
EN 301:2023 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 301:2017 Adhesives@ phenolic and aminoplastic@ for load-bearing timber structures - Classification and performance requirements
EN 301:1992 Adhesives phenolic and aminoplastic, for load bearing timber structures; classification and performance requirements
EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)

Danish Standards Foundation, Ammonia and aldehydes

DS/EN 1243:2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
DS/EN ISO 172:1999 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia
DS/EN ISO 11402/AC:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content
DS/EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content
DS/EN ISO 120:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method
DS/EN 15416-4:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives
DS/EN 1541:2001 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract

Lithuanian Standards Office , Ammonia and aldehydes

LST EN 1243-2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
LST EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
LST EN ISO 11402:2005/AC:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
LST EN ISO 172:2000 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978)
LST EN 301-2006 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
LST EN ISO 120:2000 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977)
LST EN 15416-4-2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives
LST EN 1541-2003 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract

AENOR, Ammonia and aldehydes

UNE-EN 1243:2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
UNE-EN ISO 11402:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
UNE-EN ISO 172:1999 PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETECTION OF FREE AMMONIA (ISO 172:1978)
UNE-EN 301:2014 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
UNE-EN ISO 120:1999 PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETERMINATION OF FREE AMMONIA AND AMMONIUM COMPOUNDS. COLORIMETRIC COMPARISON METHOD (ISO 120:1977).
UNE-EN 1541:2002 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract

Association Francaise de Normalisation, Ammonia and aldehydes

NF EN 1243:2011 Adhésifs - Détermination du formaldéhyde libre dans les condensats de formaldéhyde amino et amido
NF EN ISO 11402:2005 Résines phénoliques, aminiques et de condensation - Dosage du formaldéhyde libre
NF T51-405*NF EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content.
NF T76-006*NF EN 1243:2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates.
NF T51-008*NF EN ISO 172:1998 Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.
NF EN ISO 120:1998 Plastiques - Pièces moulées à base de phénoplastes - Dosage de l'ammoniac libre et des composes ammoniacaux. Méthode par comparaison colorimétrique.
NF EN ISO 172:1998 Plastiques - Pièces moulées à base de phénoplastes - Recherche de la présence d'ammoniac libre.
NF T51-009*NF EN ISO 120:1998 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method.
NF EN 301:2023 Adhésifs de nature phénolique et aminoplaste, pour structures portantes en bois - Classification et exigences de performance
NF EN 1541:2001 Papiers et cartons destinés à entrer en contact avec les denrées alimentaires - Détermination du formaldéhyde dans un extrait aqueux

British Standards Institution (BSI), Ammonia and aldehydes

BS EN 1243:2011 Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates
BS EN ISO 172:1980 Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia
BS EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia
BS EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content
BS 2690-102:1979 Methods of testing water used in industry - Hydrazine: spectrophotometric method (4-dimethylaminobenzaldehyde)
BS 1203:2001 Hot-setting phenolic and aminoplastic wood adhesives - Classification and test method
BS EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
BS EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
BS EN ISO 120:1978 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method
BS EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method
BS ISO 14849:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method
BS EN 301:2006 Adhesives, phenolic and aminoplastic, for loading bearing timber structures - Classification and performance requirements
21/30444357 DC BS EN 301. Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
BS EN 301:2023 Tracked Changes. Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet
BS EN 1541:2001 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract
BS 5711-10:1979 Methods of sampling and test for glycerol - Determination of arsenic content: silver diethyldithiocarbamate method

Japanese Industrial Standards Committee (JISC), Ammonia and aldehydes

JIS K 8496:1994 para-Dimethylaminobenzaldehyde
JIS K 8496:2019 p-Dimethylaminobenzaldehyde (Reagent)
JIS K 7230:1995 Determination of free ammonia in phenol-formaldehyde moldings
JIS K 7230:2007 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds (Indophenol method)

KR-KS, Ammonia and aldehydes

KS M 8555-2005(2023) p－Dimethylaminobenzaldehyde
KS M ISO 172-2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
KS M ISO 9020-2002 Binders for paints and varnishes－Determination of free－formaldehydecontent of amino resins－Sodium sulfite titrimetric method

SE-SIS, Ammonia and aldehydes

SIS 16 41 04-1966 Phenolic mouldings. Detection of free ammonia
SIS 16 41 03-1963 Phenolic mouldings. Determination of free ammonia and ammonium compounds
SIS SS 16 42 31-1979 Melamine phenolic moulding compounds (MPF)

Korean Agency for Technology and Standards (KATS), Ammonia and aldehydes

KS M 3711-2018 Determination of free ammonia in phenol-formaldehyde molding
KS M 8555-2005(2018)
KS M ISO 11402-2006(2017) Phenolic amino and condensation resins－Determination of free－formaldehyde content
KS M ISO 11402-2006(2022) Phenolic amino and condensation resins－Determination of free－formaldehyde content
KS M 8554-2005 p－Dimethylaminobenzylidene rhodanine
KS M ISO 172:2002 Plastics-Phenol-formaldehyde mouldings-Determination of free ammonia
KS M ISO 11402:2006 Phenolic amino and condensation resins－Determination of free－formaldehyde content
KS M 3711-2008 Determination of free ammonia in phenol-formaldehyde molding
KS M ISO 172-2002(2017) Plastics－Phenol-formaldehyde mouldings－Determination of free ammonia
KS M ISO 172:2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
KS M ISO 9020:2002 Binders for paints and varnishes－Determination of free－formaldehydecontent of amino resins－Sodium sulfite titrimetric method
KS M ISO 9020:2005 Binders for paints and varnishes－Determination of free－formaldehydecontent of amino resins－Sodium sulfite titrimetric method
KS I 3547-2012 Performance test methods for evaluating the reduction of VOCs(volatile organic compounds) and aldehyde concentrations by building material－Liquid phase building material
KS M ISO 14527-1:2008 Plastics-Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF- and UF/MF-PMCs)-Part 1:Designation system and basis for specifications
KS I 3546-2012 Reduction performance test of VOCs (volatile organic compound) and aldehyde by contamination reduction building material - the solid phase building material
KS M 1998-2009 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products

German Institute for Standardization, Ammonia and aldehydes

DIN EN 1243:2011 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates; German version EN 1243:2011
DIN EN 1243:2011-07 Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates; German version EN 1243:2011
DIN EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005
DIN EN ISO 11402 Berichtigung 1:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006
DIN EN ISO 11402:2005-09 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005
DIN EN ISO 11402 Berichtigung 1:2006-11 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006
DIN EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998
DIN EN ISO 172:1998-10 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998
DIN EN ISO 120:1998-10 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998
DIN EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998
DIN EN 301:2023-05 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2023
DIN EN 301:2023 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
DIN ISO 8975:1992-01 Plastics; phenolic resins; determination of pH; identical with ISO 8975:1989
DIN EN 1541:2001-07 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract; German version EN 1541:2001
DIN EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2013
DIN EN 301:2018 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2017
DIN 53749:1970 Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State
DIN ISO 9944:1992-06 Plastics; phenolic resins; determination of electrical conductivity of resin extracts; identical with ISO 9944:1990

HU-MSZT, Ammonia and aldehydes

MSZ 3796-1981

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ammonia and aldehydes

GB/T 5473-1985 Phenol-formaldehyde mouldings--Detection of free ammonia
GB/T 5473-2016 Plastics.Phenol formaldehyde mouldings.Detection of free ammonia
GB/T 3600-2000 Fertilizers-Determination of ammoniacal nitrogen content-Formaldehyde method
GB/T 32461-2015 Determination of formaldehyde in amino resins and phenolic resins and of migration of formaldehyde in their moldings.High performance liquid chromatography
GB/T 15507-1995 Water quality--Determination of hydrazine--p-Dime-tylaminobenzaldehyde spectrophotometric method
GB/T 12143.2-1989 Determination method for amino nitrogen content in fruit and vegetable juice beverages--Formol number
GB 12143.2-12143.3-89 Determination method for amino nitrogen content in fruit and vegetable juice beverages-Formol number Determination method for L-ascorbic acid in fruit and vegetable juice beverages-Ethyl ether extract
GB/T 5474-1985 Phenol-formaldehyde mouldings--Determination of free ammonia and ammonium compounds--Colorimetric comparison method
GB/T 14375-1993 Water quality. Determination of monomethyl hydrazine. p-Dimethylaminobenzaldegyde spectrophotometric method
GB/T 5474-2016 Plastics.Phenol formaldehyde mouldings.Determination of free ammonia and ammonium compounds.Colorimetric comparison method
GB/T 27593-2011 Textile dyeing and finishing auxiliaries.Determination of free formaldehyde content of amino resin agent
GB/T 9695.23-2008 Meat and meat products.Determination of hydroxyproline content
GB/T 9695.23-1990 Meat and meat products--Method for determination of L (-)-hydroxyprolin content
GB/T 51109 Specifications for installation and quality acceptance of spandex equipment engineering
GB/T 51109-2015 Specifications for installation and quality acceptance of spandex equipment engineering
GB/T 21126-2007 Determination of sodium formaldehyde sulfoxylate in grain products

TR-TSE, Ammonia and aldehydes

TS 462-1979 PLASTICS — PMEHOL — FORMALDENYDE MOULDING DETECTION OF FREE AMHONIA
TS 339-1966 PLASTICS DETERMINATION OF FREE AMMONIA AND AMMONIUM COMPOUNDS ?N PHENOL - FORMALDEHYDE MOULDINGS

ES-AENOR, Ammonia and aldehydes

International Organization for Standardization (ISO), Ammonia and aldehydes

ISO 11402:2004 Phenolic, amino and condensation resins - Determination of free-formaldehyde content
ISO 14849:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method
ISO 120:1977 Plastics; Phenol-formaldehyde mouldings; Determination of free ammonia and ammonium compounds; Colorimetric comparison method
ISO 9988-1:1991 Plastics; polyoxymethylene (POM) moulding and extrusion materials; part 1: designation
ISO 17226-2:2018 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis

未注明发布机构, Ammonia and aldehydes

BS EN ISO 11402:2005(2006) Phenolic, amino and condensation resins — Determination of free - formaldehyde content
BS 2690-102:1979(1999) Methods of testing Water used in industry — Part 102 : Hydrazine : spectrophotometric method (4 - dimethylaminobenzaldehyde)
BS 1204:1993 Specification for Type MR phenolic and aminoplastic synthetic resin adhesives for wood
BS EN ISO 9020:1998(1999)*BS 6782-7:1996 Binders for paints and varnishes — Determination of free - formaldehyde content ofamino resins — Sodium sulfite titrimetric method

RU-GOST R, Ammonia and aldehydes

GOST 30181.6-1994 Mineral fertilizers. Method for determination of mass fraction of nitrogen in ammonium salts (in ammonium form, using the formaldehyde method)
GOST 9359-1980 Urea-formaldehyde and melamine-formaldehyide moulding materials (aminoplasts). Specifications
GOST R 57999-2017 Adhesives for load-bearing timber structures. Phenolic and aminoplastic. Classification and performance requirements
GOST 29327-1992 Plastics. Liquid phenolic resins. Determination of water mixibility
GOST R 51122-1997 Fruit and vegetable juices. Potentiometrical method for determination of the formol number
GOST R 51762-2001 Vodka and ethanol from food raw material. Gas-chromatographic method for determination of carbonic acids and furfural content
GOST R 51124-1997 Fruit and vegetable juices. Protometrical method for determination of proline
GOST 28774-1990 Plain bearings. Wrapped bushes with anti-friction layer based on polyacetal-KX. Types, dimensions and tolerances
GOST R 53867-2010 Wood-based panels and plywood. Determination of formaldehyde release by the gas analysis method

CZ-CSN, Ammonia and aldehydes

CSN 64 0236-1963 Detection of free Amonia in phenol ormaldehyde mouldings Qualitative method)
CSN ON 65 0210-1964

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ammonia and aldehydes

GB/T 34532-2017 Coking wastewater—Determination of ammonia nitrogen content—Formaldehyde method

YU-JUS, Ammonia and aldehydes

JUS G.S1.710-1984 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia

Professional Standard - Commodity Inspection, Ammonia and aldehydes

SN/T 2784-2011 Detection method of free ammonia in imported phenolic plastics

RO-ASRO, Ammonia and aldehydes

STAS 5799-1986 PLASTICS Detection and determination of free ammonia of phenol-formaldehyde mouldings

中华人民共和国国家卫生和计划生育委员会, Ammonia and aldehydes

WS/T 352-2011 Reference method for determination of catalytic activity concentration of alanine aminotransferase (without pyridoxal phosphate)

PT-IPQ, Ammonia and aldehydes

NP EN 1243-2000 Adhesives Determination of free formaldehyde in amino and amidoformaldehyde condensates

Professional Standard - Hygiene , Ammonia and aldehydes

WS/T 353-2011 Reference procedure for the measurement of catalytic activity concentration of aspartate aminotransferase (No pyridoxal-5'-phosphoric acid)

Group Standards of the People's Republic of China, Ammonia and aldehydes

T/GDBK 006-2023 Detection method of γ-aminobutyric acid-glyoxal-formaldehyde adduct in baked food——High performance liquid chromatography/mass spectrometry
T/GDES 10004-2017 Technical requirements for ammonia solid storage and delivery system
T/CCTA 40201-2022 Cotton and nylon filament spandex covered yarn interwoven elastic natural color cloth
T/YBL 003-2018 Preparation and quantitative calculation of acetaldehyde detection sample in polyethylene terephthalate (PET) bottles

AR-IRAM, Ammonia and aldehydes

IRAM 13 309-1962

TH-TISI, Ammonia and aldehydes

TIS 360-1980 Standard for synthetic resin adhesives (phenolic and aminoplastic)for wood

IN-BIS, Ammonia and aldehydes

IS 848-1974

Professional Standard - Environmental Protection, Ammonia and aldehydes

HJ 674-2013 Water quality.Determination of hydrazine and monomethyl hydrazine by p-Dimethylaminobenzaldehyde spectrophotometric method

Guangdong Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB44/T 1855-2016 Material Identification Method of Urea Formaldehyde Resin in Amino Molded Products Infrared Spectroscopy

ES-UNE, Ammonia and aldehydes

UNE-EN 301:2018 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements

(U.S.) Ford Automotive Standards, Ammonia and aldehydes

FORD S-M98B4500-A-2003 AMMONIA ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD S-M98B4500-A-2009 AMMONIA ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M3D78-A-2006 PHENOLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M3D25-A-2004 PHENOLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M3D136-A2-2006 PHENOLIC COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D287-A-2004 POLYURETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G377-A1-2003 ADHESION PROMOTER, POLYURETHANE ***TO BE USED WITH FORD WSS=M99P1111-A***
FORD ESA-M2D213-A-2009 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D347-A-2009 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99G154-B-2012 INSULATOR, MOLDED PHENOLIC RESIN, FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D362-A-2006 POLYURETHANE FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D226-A-2007 POLYURETHANE FOAM, OPEN CELL *** TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G343-A-2009 GLASS PRIMER, POLYURETHANE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D226-A-2009 POLYURETHANE FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D460-A-2013 POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M3L78-A-2003 LAMINATE - PHENOLIC, PAPER AND GLASS***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M3D117-B-2004 PHENOLIC MOLDING COMPOUND - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D357-A-2009 ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D344-A-2004 POLYURETHANE ELASTOMER, INJECTION MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D75-A-2005 POLYURETHANE FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2D456-A-2004 POLYURETHANE (PUR) FOAM, CAST ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D417-A-2003 POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D75-A-2009 POLYURETHANE FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D344-A-2009 POLYURETHANE ELASTOMER, INJECTION MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M3D16-A-2005 PHENOLIC MOLDING COMPOUND, CELLULOSE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M3D64-A-2004 PHENOLIC MOLDING COMPOUND - GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M3L39-A-2005 LAMINATE, PHENOLIC - PAPER BASE - ECONOMY GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D213-A-2004 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D264-A-2004 POLYURETHANE (PUR) FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D57-A-2005 POLYURETHANE (PUR) FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D347-A-2005 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99D45-A-2006 POLYURETHANE FILM, WATER BARRIER***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D224-A-2006 POLYURETHANE FOAM, OPEN CELL - RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M2D346-A-2006 POLYURETHANE FOAM, SOUND DEADENING - DIE CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D406-A-2004 POLYURETHANE (PUR) FOAM, ACOUSTIC GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M6J151-A-2008 PRIMER SURFACER, PU- MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D57-A-2009 POLYURETHANE (PUR) FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D264-A-2009 POLYURETHANE (PUR) FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D224-B1-2009 POLYURETHANE FOAM, OPEN CELL, RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D500-A1-2009 POLYURETHANE FOAM, CLOSED CELL, STANDARD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D396-A-2010 POLYURETHANE (PUR) FOAM, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D357-A-1978 ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER - CHEMICALLY COUPLED
FORD ESP-M3D119-A-2004 PHENOLIC IMPREGNATED FELT MAT - CROSS LAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D681-A-2005 ACETAL (POM) HOMOPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D618-A2-2011 ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M4D618-A-2011 ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D983-A-2006 SPRAY ALIPHATIC POLYURETHANE SKIN *** TO BE USED WITH FORD WSS-M99P1111-A ***
FORD WSS-M2D502-A-2004 POLYURETHANE (PUR) FOAM, MICROCELLULAR, SHOCK AND VIBRATION ISOLATING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D514-A-2010 POLYURETHANE (PUR) FOAM, OPEN CELL, RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D187-A-2009 THERMOPLASTIC POLYURETHANE (TPUR) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D200-B-2009 POLYURETHANE (PUR) FOAM, FLEXIBLE, RESTRICTED FLOW ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D484-A-2009 POLYURETHANE (PUR) FOAM, MOLDED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M4D390-A-2009 POLYURETHANE FOAM, SOUND DEADENING - HEAT FORMED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D200-B-2010 POLYURETHANE (PUR) FOAM, FLEXIBLE, RESTRICTED FLOW ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D304-A-2013 POLYURETHANE FOAM, ACOUSTICAL, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D243-A2-2014 POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2G361-A-2015 ADHESIVE, MOISTURE CURE URETHANE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M11P19-A-2007 ADHESION REQUIREMENTS, POLYURETHANE FOAM TO POLYPROPYLENE - PRESSURE SENSITIVE FILM *** TO BE USED WITH FORD WSS-M9P1111-A***
FORD ESF-M3L44-A-2005 LAMINATE, PHENOLIC - PAPER BASE - CROSS PLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M97D2-A-2006 PHENOLIC (PF), 40 % GLASS FIBER REINFORCED SHEET **TO BE USED WITH FORD WSS-M99P111-A**
FORD ESB-M4D169-A2-2009 ACETAL RESIN, 15% PTFE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D169-A-2009 ACETAL RESIN, TFE FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D464-A2-2010 ACETAL HOMOPOLYMER, MODIFIED - HIGH IMPACT GRADE - PIGMENTED ***TO BE USED WITH FORD WSS-M99P1111-A***

ZA-SANS, Ammonia and aldehydes

SANS 1349:2006 Phenolic, aminoplastic and one-part polyurethane resin adhesives for the laminating and finger-jointing of timber, and for furniture and joinery

BE-NBN, Ammonia and aldehydes

NBN-EN 301-1994

CEN - European Committee for Standardization, Ammonia and aldehydes

EN 301:2006 Adhesives@ phenolic and aminoplastic@ for load-bearing timber structures - Classification and performance requirements

Hebei Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB13/T 2689-2018 General technical requirements for thermoplastic polyurethane elastomer toughened polyoxymethylene copolymer engineering plastics

Professional Standard - Textile, Ammonia and aldehydes

FZ/T 12054-2017 Natural color yarn blended with carded cotton and cupro ammonia fiber
FZ/T 14042-2018 Cotton and viscose fiber spandex core-spun yarn interwoven elastic printing and dyeing fabric
FZ/T 14051-2021 Cotton and nylon filament spandex covered yarn interwoven elastic printing and dyeing fabric
FZ/T 14049-2020 Lyocell fiber yarn and polyester spandex covered silk thread interwoven printing and dyeing fabric

Beijing Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB11/ 1014-2013 Safety technical specifications for the use and storage of liquid ammonia
DB11/T 1014-2013 Safety technical specifications for the use and storage of liquid ammonia
DB11/T 1014-2021 Safety technical specifications for the use and storage of liquid ammonia

Henan Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB41/ 866-2013 Safety technical specifications for the use and storage of liquid ammonia

Professional Standard - Chemical Industry, Ammonia and aldehydes

HG/T 5886～5889-2021 1-Acetamido-7-naphthol, benzophenone, terephthalaldehyde and 3,4-dichlorophenylthiourea (2021)

GOSTR, Ammonia and aldehydes

GOST 29327-2017 Plastics. Liquid phenolic resins. Determination of water miscibility

Professional Standard - Agriculture, Ammonia and aldehydes

GB 9695.23-1990 Determination of L(-)-Hydroxyproline Content in Meat and Meat Products
NY/T 1332-2007 Milk and Dairy Products Determination of 5-hydroxymethylfurfural by HPLC

GM Daewoo, Ammonia and aldehydes

GMKOREA EDS-M-6707-2012 Polyurethane Foam Laminated with Woven or Knitted Fabric ?? ?? ??? ??? ????? ? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW15058 [Replaced: GMKOREA EDS-M-6

Jinlin Provincial Food Standard of the People's Republic of China, Ammonia and aldehydes

DBS22/ 008-2012 Determination of L-Hydroxyproline in Milk and Dairy Products

Indonesia Standards, Ammonia and aldehydes

SNI 7079-2009

Jilin Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB22/T 3069-2019 Management Requirements for Pollutant Discharge Permit Application and Issuance Furfural Industry

Shandong Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB37/T 1914-2011 Safety technical specification for liquid ammonia storage and loading and unloading operations

Tianjin Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB12/T 761-2018 Periodic inspection and assessment of in-use ammonia-related pressure pipelines

Military Standard of the People's Republic of China-General Armament Department, Ammonia and aldehydes

GJB 533.18-1988 Detection methods for 45 components of submarine cabin air Determination of acrolein content Tryptophan absorbance method

Taiwan Provincial Standard of the People's Republic of China, Ammonia and aldehydes

CNS 15062-2007 Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber

Fujian Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB35/T 1670-2017 98% formic acid method for quantitative analysis of cotton and spandex blends

Natural Gas Processor's Association (NGPA), Ammonia and aldehydes

GPA RR-34-1978 Sour Water Equilibria: Ammonia Volatility down to ppm Levels Effect of Electrolytes on Ammonia Volatility pH vs. Composition
GPA TP-29-2003 Hydrocarbon/Water and Hydrocarbon/Aqueous Amines Mutual Solubilities

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Ammonia and aldehydes

ASHRAE 3924-1995 Gaseous Ammonia Dispersion: Comparison of Experimental Data with Two Predictive Models

Canadian General Standards Board （CGSB), Ammonia and aldehydes

CGSB 2.11-94 6.4-CAN/CGSB-1994 Methodes D'Echantillonnage Et D'Essai Des Savons Et Detergents Dosage De L'Ammoniac Libre

Liaoning Provincial Standard of the People's Republic of China, Ammonia and aldehydes

DB21/T 1943-2012 Quotas and calculation methods for ammonia consumption and energy consumption per unit product of urea

GM Europe, Ammonia and aldehydes

GME TM 601700-1994 Polyurethanschaum mit Untergewirke kaschiert Polyurethane Foam Laminated with Knitted Fabric Backing English/German

国家药监局, Ammonia and aldehydes

YY/T 1850-2023 Technical requirements and test methods for male condoms polyurethane condoms

Professional Standard - Aerospace, Ammonia and aldehydes

QJ 1992.25-1990/XG 1-1996 Adhesive preparation and bonding process specification X98-11 Acetal drying glue bonding process
QJ 1992.25-1990 Adhesive preparation and bonding process specification X98-11 Acetal drying glue bonding process