ZH
RU
ES
Diffraction Analysis Spectral Analysis
Diffraction Analysis Spectral Analysis, Total:500 items.
In the international standard classification, Diffraction Analysis Spectral Analysis involves: Particle size analysis. Sieving, Power stations in general, Non-ferrous metals, Analytical chemistry, Radiation protection, Ceramics, Testing of metals, Occupational safety. Industrial hygiene, Ferrous metals, Paints and varnishes, Metalliferous minerals, Iron and steel products, Optics and optical measurements, Electronic components in general, Refractories, Construction materials, Non-destructive testing, Ferroalloys, Products of the chemical industry, Vocabularies, Jewellery, Fibre optic communications, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Standardization. General rules, Paint ingredients, Surface treatment and coating, Air quality, Information sciences. Publishing, Education, Protection against fire, Optical equipment, Inorganic chemicals, Nuclear energy engineering.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Diffraction Analysis Spectral Analysis
- GB/T 19077.1-2003 Particle size analysis--Laser diffraction method
- GB/T 19077-2016 Particle size analysis.Laser diffraction methods
- GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
- GB/T 19077.1-2008 Particle size analysis.Laser diffraction methods.Part 1:General principles
- GB/T 19501-2013 Microbeam analysis.General guide for electron backscatter diffraction analysis
- GB 16355-1996 Radiation protection standards for X-ray diffraction and fluorescence analysis equipment
- GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
- GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
- GB/T 9259-1988 Terminology of emission spectochemical analysis
- GB/T 21782.13-2009 Coating powders.Part 13:Particle size analysis by laser diffraction
- GB/T 30703-2014 Microbeam analysis.Guidelines for orientation measurement using electron backscatter diffraction
- GB/T 18907-2013 Microbeam analysis.Analytical electron microscopy.Selected-area electron diffraction analysis using a transmission electron microscope
- GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
- GB/T 19501-2004 General guide for electron backscatter diffraction analysis
- GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
- GB/T 14203-1993 General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
- GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
- GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
- GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
- GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys
- GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys
- GB/T 14203-2016 General rules for spark discharge atomic emission spectrometry
- GB/T 5123-1985 Nickel--Method of spectral analysis
- GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
- GB/T 16597-1996 Analytical methods of metallurgical products. General rule for X-ray fluorescence spectrometric methods
- GB/T 19502-2004 Surface chemical analysis-Glow discharge optical emission spectrometry(GD-OSE)-Introduction to use
- GB/T 18907-2002 Method of selected area electron diffraction for transmission electron microscopes
- GB/T 5225-1985 Metal materials--Quantitative phase analysis--"value K" method of x-ray diffraction
- GB/Z 42520-2023 Guidelines for X-ray fluorescence spectrometric laboratory practice for the analysis of iron ores
- GB/T 30904-2014 Inorganic chemicals for industrial use.Crystal form analysis.X-ray diffraction method
- GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
- GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
- GB/T 4470-1998 Analytical spectroscopic methods-Flame emission,atomic absorption and atomic fluorescence-Vocabulary
KR-KS, Diffraction Analysis Spectral Analysis
Korean Agency for Technology and Standards (KATS), Diffraction Analysis Spectral Analysis
- KS A ISO 13320:2022 Particle size analysis — Laser diffraction methods
- KS A ISO 13320-2014(2019) Particle size analysis — Laser diffraction methods
- KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
- KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
- KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
- KS M 0043-2009 General rules for X-ray diffractometric analysis
- KS A ISO 13320:2014 Particle size analysis — Laser diffraction methods
- KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
- KS A ISO 13320-1-2004(2009) Particle size analysis Laser diffraction methods - Part 1 General principles
- KS D 2558-1995 Method for emission spectrographic analysis of tantalum
- KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
- KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
- KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
- KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
- KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
- KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
- KS M 0043-2009(2019) General rules for X-ray diffractometric analysis
- KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
- KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
- KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
- KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
- KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
- KS M ISO 8130-13:2008 Coating powders－Part 13：Particle size analysis by laser diffraction
- KS D 1681-1993 Method for emission spectrochemical analysis of aluminium ingot
- KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
- KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
- KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
- KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
- KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
- KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
- KS M ISO 8130-13:2019 Coating Powders — Part 13: Particle size analysis by laser diffraction
- KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
- KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
- KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS A ISO 13320-1:2004 Particle size analysis Laser diffraction methods - Part 1 General principles
- KS A ISO 13320-1:2014 Particle size analysis Laser diffraction methods - Part 1 General principles
- KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
- KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
- KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
- KS M 0032-2009(2019) General rules for ICP emission spectrochemical analysis
- KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
- KS D 1685-1993 Methods for emission spectrochemical analysis of zinc metal
- KS D 1658-1993 Emission-spectroscopic analysis for carbon steel and low alloy steel
- KS D 1658-2003(2016) Emission-spectroscopic analysis for carbon steel and low alloy steel
- KS D 1687-2007 Emission-spectroscopic analysis for pig iron and cast iron
- KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
- KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
- KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
- KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
- KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
- KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
- KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
- KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
- KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
- KS M 0028-2009(2019) General rules for light emission spectrochemical analysis
- KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
- KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
- KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
- KS D 1852-2015 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
- KS D 1852-2020 Methods for optical emission spectrochemical analysis of aluminium and aluminium alloys
- KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
- KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
- KS D 1929-2009 Methods for emission spectrochemical analysis of die casting zinc alloy
- KS D 1929-1993 Methods for Emission Spectrochemical Analysis of Die Casting Zinc Alloy
- KS D 1899-1993 Methods for emission spectrochemical analysis of electrolytic cathode copper
- KS D 1680-1993 General rules for photographic emission spectrochemical analysis of metal materials
- KS D 1652-2022 Iron and steel — Method for spark discharge atomic emission spectrometric analysis
- KS D 1652-2007(2017) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
- KS D ISO 3815-1-2006(2016) Zinc and zinc alloys－Part 1：Analysis of solid samples by optical emission spectrometry
- KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
- KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
- KS E 3075-2017 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
- KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
- KS E 3075-2022 Method for X-ray fluorescence spectrometric analysis of limestone and dolomite
- KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
- KS D ISO 3815-2002(2006) Zinc and zinc alloys－Spectrographic analysis
- KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS D ISO 3815-1:2021 Zinc and zinc alloys — Part 1: Analysis of solid samples by optical emission spectrometry
- KS M ISO 6955-2016(2021) Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
- KS M ISO 6955:2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
- KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
Japanese Industrial Standards Committee (JISC), Diffraction Analysis Spectral Analysis
- JIS Z 8825:2013 Particle size analysis.Laser diffraction methods
- JIS Z 8825:2022 Particle size analysis -- Laser diffraction methods
- JIS H 1691:1968 Method for spectrochemical analysis of tantalum
- JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
- JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
- JIS Z 8825-1:2001 Particle size analysis -- Laser diffraction methods -- Part 1: General principles
- JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
- JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
- JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
- JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
- JIS G 1202:1975 General rules on emission-spectroscopic analysis for iron and steel
- JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
- JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
- JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
- JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
- JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
- JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
- JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
- JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
- JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- JIS K 0131:1996 General rules for X-ray diffractometric analysis
- JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
- JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
- JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
- JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
- JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
- JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)
- JIS G 1251:1976 Emission-spectroscopic analysis for pig iron and cast iron
- JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
- JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
- JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
- JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
- JIS G 1253:2002 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
- JIS C 6192:2008 Calibration of optical spectrum analyzers
- JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- JIS H 1305:1976 Method for photoelectric emission spectrochemical analysis of aluminium and aluminium alloy
- JIS K 0181:2021 Surface chemical analysis -- Total reflection X-ray fluorescence analysis of water
- JIS R 2216:1995 Method for X-ray fluorescence spectrometric analysis of refractory bricks and refractory mortars
- JIS Z 2611:1977 General rules for photoelectric emission spectrochemical analysis of metal materials
- JIS G 1252:1975 Emission-spectroscopic analysis for carbon steel and low alloy steel
- JIS K 0152:2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Repeatability and constancy of intensity scale
- JIS H 1699:1999 Methods for ICP emission spectrometric analysis of tantalum
- JIS H 1699:2006 Methods for ICP emission spectrometric analysis of tantalum
- JIS H 1292:2018 Copper alloys -- Methods for X-ray fluorescence spectrometric analysis
Danish Standards Foundation, Diffraction Analysis Spectral Analysis
- DS/ISO 13320:2009 Particle size analysis - Laser diffraction methods
- DS/EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
- DS/EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction
- DS/EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
- DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
- DS/EN 62129:2006 Calibration of optical spectrum analyzers
- DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
- DS/EN 15079:2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
- DS/ENV 12908:1998 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
British Standards Institution (BSI), Diffraction Analysis Spectral Analysis
- BS ISO 13320:2020 Particle size analysis. Laser diffraction methods
- BS ISO 13320:2010 Particle size analysis. Laser diffraction methods
- BS ISO 13320:2009 Particle size analysis - Laser diffraction methods
- 19/30333249 DC BS ISO 13320. Particle size analysis. Laser diffraction methods
- BS ISO 13320-1:2000 Particle size analysis - Laser diffraction methods - General principles
- BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
- BS EN ISO 8130-13:2010 Coating powders. Particle size analysis by laser diffraction
- BS EN ISO 8130-13:2001 Coating powders. Particle size analysis by laser diffraction
- BS EN 12019:1998 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
- BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
- BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
- BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
- PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
- BS EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
- BS PD ISO/TS 18507:2015 Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
- BS ISO 10810:2019 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
- BS ISO 11505:2012 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
- BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- BS EN ISO 8130-13:2019 Tracked Changes. Coating powders. Particle size analysis by laser diffraction
- BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- 22/30444828 DC BS EN 14242. Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
- BS ISO 16258-2:2015 Workplace air. Analysis of respirable crystalline silica by X-ray diffraction. Method by indirect analysis
- BS ISO 25498:2018 Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
- BS EN 62129:2006 Calibration of optical spectrum analyzers
- PD ISO/TS 25138:2019 Tracked Changes. Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
- BS ISO 20289:2018 Surface chemical analysis. Total reflection X-ray fluorescence analysis of water
- BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
- BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
- BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
- BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
- BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
- BS ISO 24417:2022 Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
- BS DD ENV 12908:1998 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
- BS EN ISO 3815-1:2005 Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry
- PD ISO/TS 15338:2020 Surface chemical analysis. Glow discharge mass spectrometry. Operating procedures
German Institute for Standardization, Diffraction Analysis Spectral Analysis
- DIN ISO 13320:2022-12 Particle size analysis - Laser diffraction methods (ISO 13320:2020)
- DIN ISO 13320:2022 Particle size analysis - Laser diffraction methods (ISO 13320:2020)
- DIN EN ISO 8130-13:2019-08 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019); German version EN ISO 8130-13:2019
- DIN EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004
- DIN EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005
- DIN ISO 13067:2015 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2011)
- DIN EN 14242:2023-04 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis; German version EN 14242:2023
- DIN EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
- DIN EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
- DIN EN 15079:2015-07 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES); German version EN 15079:2015
- DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
- DIN ISO 11505:2018-02 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry (ISO 11505:2012)
- DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
- DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
- DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
- DIN 51008-2:1990 Optical emission spectral analysis (OES); flame and plasma systems
- DIN ISO 16962:2018 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry (ISO 16962:2017)
- DIN ISO 24173:2013 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction (ISO 24713:2009)
- DIN EN 15305 Berichtigung 1:2009-04 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
- DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
- DIN EN 15305:2009-01 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
- DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
International Organization for Standardization (ISO), Diffraction Analysis Spectral Analysis
- ISO 13320:2020 Particle size analysis — Laser diffraction methods
- ISO 13320:2009 Particle size analysis - Laser diffraction methods
- ISO 13320-1:1999 Particle size analysis - Laser diffraction methods - Part 1: General principles
- ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
- ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
- ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
- ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
- ISO 8130-13:2019 Coating powders — Part 13: Particle size analysis by laser diffraction
- ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
- ISO 25498:2018 Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
- ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
- ISO/CD 25498:2023 Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope
- ISO/TS 25138:2019 Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- ISO/TS 18507:2015 Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
- ISO/CD 23699 Microbeam Analysis — Electron Backscattered Electron Diffraction — Vocabulary
- ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
- ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
- ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- ISO 16962:2017 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
- ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
- ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- ISO 20289:2018 Surface chemical analysis - Total reflection X-ray fluorescence analysis of water
- ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
- ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- ISO 24417:2022 Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
- ISO 3815:1976 Zinc and zinc alloys; Spectrographic analysis
- ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
PT-IPQ, Diffraction Analysis Spectral Analysis
Professional Standard - Electricity, Diffraction Analysis Spectral Analysis
- DL/T 1151.22-2012 Analytical methods of scale and corrosion products in power plants.Part 22: standard test methods of X-ray fluorescence spectrometry and X-ray diffraction
RO-ASRO, Diffraction Analysis Spectral Analysis
American National Standards Institute （ANSI), Diffraction Analysis Spectral Analysis
- ANSI/HPS N43.2-2021 Radiation Safety for X-ray Diffraction and Fluorescence Analysis Equipment
- ANSI N43.2-2001 Radiation Safety for X-ray Diffraction and Fluorescence Analysis Equipment
Standard Association of Australia （SAA）, Diffraction Analysis Spectral Analysis
- AS 4863.1:2000 Particle size analysis - Laser diffraction methods - General Principles
- AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser
- AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
- AS 4392.1:1996 Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Titaniferous mineral sands
Guangdong Provincial Standard of the People's Republic of China, Diffraction Analysis Spectral Analysis
- DB44/T 1078-2012 Laser Diffraction Method for Particle Size Analysis of Ceramic Raw Materials
- DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry
European Committee for Standardization (CEN), Diffraction Analysis Spectral Analysis
- EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
- PREN 14726-2003 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
- EN ISO 8130-13:2010 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
- CEN EN 14726-2005 Aluminium and
aluminium alloys —
Chemical analysis —
Guideline for spark
optical emission
spectrometric analysis
- EN 12019:1997 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
- EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
- CEN EN 62129-2006 Calibration of optical spectrum analyzers
- CEN EN 62129-2006_ Calibration of optical
spectrum analyzers
- CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
- PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
- DD ENV 12908-1997 Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation
CEN - European Committee for Standardization, Diffraction Analysis Spectral Analysis
- EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
- EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction
Association Francaise de Normalisation, Diffraction Analysis Spectral Analysis
- NF T30-499-13*NF EN ISO 8130-13:2019 Coating powders - Part 13 : particle size analysis by laser diffraction
- NF A07-510X2:1975 ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.
- NF A06-590:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.
- NF EN ISO 8130-13:2019 Poudres pour revêtement - Partie 13 : analyse granulométrique par diffraction laser
- NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
- NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
- NF A06-840:1998 Zinc and zinc alloys. Optical emission spectrometric analysis.
- NF A07-500:1979 Analysis of aluminium and its alloys by emission spectrometry.
- NF T30-499-13:2011 Coating powders - Part 13 : particle size analysis by laser diffraction.
- NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
- NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
- NF X21-011*NF ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
- NF C93-845:2006 Calibration of optical spectrum analyzers.
- NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
- NF A06-012*NF EN 14242:2005 Aluminium and aluminium alloys - Chemical analysis - Inductive coupled plasma-optical emission spectrometric method
- NF A07-520:1971 Analysis of aluminium silicon and aluminium-silicon-copper alloys by emission spectrography.
- NF A07-830:1973 Zinc for galvanizing purposes. Technical specification for emission spectral analysis.
- NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
- NF EN 15079:2015 Cuivre et alliages de cuivre - Analyse par spectrométrie d'émission optique à étincelles (SEO-E)
- NF ISO 24173:2009 Analyse par microfaisceaux - Lignes directrices pour la mesure d'orientation par diffraction d'électrons rétrodiffusés
- NF A08-700*NF EN 15079:2015 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
- NF ISO 14707:2006 Analyse chimique des surfaces - Spectrométrie d'émission optique à décharge luminescente - Introduction à son emploi
- NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
- A08-652:1994 Chemical analysis of titanium and titanium alloys. Rules to be followed for plasma emission spectrometrie analysis.
- NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
- NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
- NF T25-111-6:1991 Carbon fibres- Texture and structure- Part 6: Analysis of the selected area diffraction
- NF A11-103:1977 Chemical analysis of ferroniobium. Determination of niobium by X ray fluorescence spectrometry.
- NF EN 15305:2009 Essais non-destructifs - Méthode d'essai pour l'analyse des contraintes résiduelles par diffraction des rayons X
ES-UNE, Diffraction Analysis Spectral Analysis
- UNE-EN ISO 8130-13:2020 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
- UNE-EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis (Endorsed by Asociación Española de Normalización in April of 2023.)
- UNE-EN 15079:2015 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
RU-GOST R, Diffraction Analysis Spectral Analysis
Professional Standard - Non-ferrous Metal, Diffraction Analysis Spectral Analysis
- YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
- YS/T 559-2009 Methods for emission spectrum analysis of tungsten
- YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
- YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
- YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
- YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
- YS/T 361-2006 Determination of trace impurities in purity platinum by atomic emission spectrometric
- YS/T 362-2006 Determination of trace impurities in purity palladium by atomic emission spectrometric
- YS/T 363-2006 Determination of trace impurities in purity rhodium by atomic emission spectrometric
- YS/T 364-2006 Determination of trace impurities in purity iridium by atomic emission spectrometric
- YS/T 361-1994 Emission Spectral Analysis of Impurity Elements in Pure Platinum
- YS/T 362-1994 Emission spectrum analysis of impurity elements in pure palladium
- YS/T 363-1994 Emission spectrum analysis of impurity elements in pure rhodium
- YS/T 364-1994 Emission Spectral Analysis of Impurity Elements in Pure Iridium
- YS/T 1036-2015 Test method of optical emission spectrometric analysis of magnesium rare earth alloys
- YS/T 365-2006 Determination of trace impurities in high purity palladium by atomic emission spectrometric
- YS/T 365-1994 Emission Spectrum Analysis of Impurity Elements in High Purity Platinum
- YS/T 82-2006 Basis platinum as spectral analysis
- YS/T 83-2006 Basis palladium as spectral analysis
- YS/T 84-2006 Basis iridum as spectral analysis
- YS/T 85-2006 Basis rhodium as spectral analysis
- YS/T 82-1994 Platinum substrates for spectroscopic analysis
- YS/T 83-1994 Palladium Matrix for Spectroscopic Analysis
- YS/T 84-1994 Iridium matrix for spectroscopic analysis
- YS/T 85-1994 Rhodium Matrix for Spectroscopic Analysis
Occupational Health Standard of the People's Republic of China, Diffraction Analysis Spectral Analysis
- GBZ 115-2002 Radiological standards for X-ray Diffraction and fluorescence analysis equipment
AENOR, Diffraction Analysis Spectral Analysis
- UNE-EN 14726:2006 Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis
- UNE-EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
American Society for Testing and Materials (ASTM), Diffraction Analysis Spectral Analysis
- ASTM E1621-21 Standard Guide for X-Ray Emission Spectrometric Analysis
- ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
- ASTM E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis
- ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
- ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
- ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
- ASTM D5381-93(2003) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
- ASTM D5381-93(1998) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
- ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
- ASTM E572-94(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
- ASTM E572-02a(2006)e1 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
- ASTM E572-02a(2006) Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
- ASTM E572-02a Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
- ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E572-94(2000)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
- ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E1097-03 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
- ASTM E322-96e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
- ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
BE-NBN, Diffraction Analysis Spectral Analysis
工业和信息化部, Diffraction Analysis Spectral Analysis
- YS/T 1178-2017 Aluminum slag phase analysis X-ray diffraction method
- YS/T 1344.3-2020 Chemical analysis method of tin-doped indium oxide powder Part 3: Phase analysis X-ray diffraction analysis method
- YB/T 172-2020 Quantitative phase analysis of silica bricks by X-ray diffraction method
- YS/T 84-2020 Iridium matrix for spectroscopic analysis
- YS/T 82-2020 Platinum matrix for spectroscopic analysis
- YS/T 83-2020 Palladium matrix for spectroscopic analysis
- YS/T 85-2020 Rhodium matrix for spectroscopic analysis
Professional Standard - Ferrous Metallurgy, Diffraction Analysis Spectral Analysis
- YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
- YB/T 172-2000 Phase quantitative analysis of silica bricks.X-ray diffraction method
- YB/T 5320-2006 X-ray Diffraction K Value Method for Quantitative Phase Analysis of Metallic Materials
Lithuanian Standards Office , Diffraction Analysis Spectral Analysis
- LST EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
- LST EN 14242-2005 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
- LST EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
- LST EN 15079-2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
- LST L ENV 12908-2000 Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation
Taiwan Provincial Standard of the People's Republic of China, Diffraction Analysis Spectral Analysis
U.S. Air Force, Diffraction Analysis Spectral Analysis
国家市场监督管理总局、中国国家标准化管理委员会, Diffraction Analysis Spectral Analysis
- GB/T 41076-2021 Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel
- GB/T 36923-2018 Identification of pearl powder―X-ray diffraction analysis
- GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
- GB/T 16597-2019 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods
- GB/T 40407-2021 X-ray powder diffraction analysis method for determining the phases in portland cement clinker
- GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
Professional Standard - Electron, Diffraction Analysis Spectral Analysis
- SJ/Z 3206.10-1989 General rules for analysis of properties of emision spectrum
- SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum
- SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum
- SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
- SJ/Z 3206.8-1989 Geneeral rules for preparation of standard sample for spectrum analysis
- SJ/Z 3206.12-1989 General rules for emission spectrum analysis for vacuum materials
- SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials
- SJ 2656-1986 Mothod of tungsten spectral analysis
- SJ 2657-1986 Mothod of molybdeuum spectral analysis
- SJ/Z 3206.2-1989 Laser source and its performance requirements for determination of emision spectrum
- SJ/Z 3206.6-1989 Shapes and dimensions of graphite electrode for emision spectrum
Professional Standard - Commodity Inspection, Diffraction Analysis Spectral Analysis
- SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
- SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
- SN/T 2083-2008 Method for analysis of brass.Spark discharge atomic emission spectrometric
- SN/T 2079-2008 Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Diffraction Analysis Spectral Analysis
- GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry
- GB/T 34172-2017 Microbeam analysis—Electron backscatter diffraction—Phase analysis method of metal and alloy
- GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
BR-ABNT, Diffraction Analysis Spectral Analysis
ZA-SANS, Diffraction Analysis Spectral Analysis
未注明发布机构, Diffraction Analysis Spectral Analysis
- BS EN 14242:2023 Aluminium and aluminium alloys — Chemical analysis — Inductively coupled plasma optical emission spectrometric analysis
AT-ON, Diffraction Analysis Spectral Analysis
- ONORM M 6603-2-1997 Water analysis - Determination of potassium and sodium by flame emission spectrometry
International Electrotechnical Commission (IEC), Diffraction Analysis Spectral Analysis
IN-BIS, Diffraction Analysis Spectral Analysis
National Metrological Verification Regulations of the People's Republic of China, Diffraction Analysis Spectral Analysis
Professional Standard - Education, Diffraction Analysis Spectral Analysis
工业和信息化部/国家能源局, Diffraction Analysis Spectral Analysis
- JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers
PL-PKN, Diffraction Analysis Spectral Analysis
- PN C97086-1987 Coal derivatives Determination of anthracene by gas chromatography
National Metrological Technical Specifications of the People's Republic of China, Diffraction Analysis Spectral Analysis
- JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry
(U.S.) Ford Automotive Standards, Diffraction Analysis Spectral Analysis
CZ-CSN, Diffraction Analysis Spectral Analysis
- CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
- CSN 42 1211-1986 The sampling of technical iron for spectrometric and chemical analysis
- CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample