ZH
RU
ES

Absolute Fluorescence Quantitative Analysis

Absolute Fluorescence Quantitative Analysis, Total:309 items.

In the international standard classification, Absolute Fluorescence Quantitative Analysis involves: Optoelectronics. Laser equipment, Lamps and related equipment, Testing of metals, Optics and optical measurements, Analytical chemistry, Medical equipment, General methods of tests and analysis for food products, Non-ferrous metals, Microbiology, Ferroalloys, Laboratory medicine, Manufacturing processes in the rubber and plastics industries, Metalliferous minerals, Corrosion of metals, Inorganic chemicals, Ferrous metals, Ceramics, Cereals, pulses and derived products, Products of the chemical industry, Air quality, Petroleum products in general, Non-metalliferous minerals, Products of the textile industry, Farming and forestry, Protection against fire, Insulating fluids, Geology. Meteorology. Hydrology, Water quality, Wastes, Vocabularies, Food products in general, Products of non-ferrous metals, Textile fibres, Coals, Refractories, Insulating materials, Lubricants, industrial oils and related products, Electrical wires and cables, Fibre optic communications, Fuels, Electrical accessories.

国家能源局, Absolute Fluorescence Quantitative Analysis

SY/T 7309-2016 Reservoir Quantitative Fluorescence Analysis Method

Japanese Industrial Standards Committee (JISC), Absolute Fluorescence Quantitative Analysis

JIS R 1697:2015 Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

Standard Association of Australia （SAA）, Absolute Fluorescence Quantitative Analysis

AS/NZS 4782.3(Int):2006 Double-capped fluorescent lamps - Performance specifications - Procedure for quantitative analysis of mercury present in fluorescent lamps
AS/NZS 4782.3:2006 Double-capped fluorescent lamps— Performance specifications Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps
AS/NZS 4782.3:2014 Double-capped fluorescent lamps — Performance specifications, Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

Korean Agency for Technology and Standards (KATS), Absolute Fluorescence Quantitative Analysis

KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS M 1068-2005 Qualitative/quantitative screening by XRF spectrometry
KS D 2597-1996(2016) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS J 4207-2011 Spectrophotometric and fluorometric analysis methods for GMO quantification
KS M ISO 14597:2003 Petroleum products－Determination of vanadium and nickel content－Wavelength-dispersive X-ray fluorescence spectrometry
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
KS E ISO 10086-1:2007 Coal－Methods for evaluating flocculants for use in coal preparation－Part 1：Basic parameters
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS L ISO 10058-1:2012 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method)-Part 1:Apparatus, reagents, dissolution and determination of gravimetric silica
KS L ISO 21587-1:2012 Chemical analysis of aluminosilicate refractory products(alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents, dissolution and determination of gravimetric silica
KS L ISO 20565-1:2012 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)-Part 1:Apparatus, reagents, dissolution and determination of gravimetric silica
KS L ISO 21587-1-2012(2022) Chemical analysis of aluminosilicate refractory products(alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents, dissolution and determination of gravimetric silica
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h

Group Standards of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

T/CSTM 00197-2021 Graphene quantum dots — Determination of relative fluorescence quantum efficiency for the blue emission — Molecular fluorescence spectroscopy
T/NAIA 0128-2022 Rapid Determination of Aluminum Hydroxide Determination of Element Content by X-ray Fluorescence Spectroscopic Analysis (Tablet)
T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method

HU-MSZT, Absolute Fluorescence Quantitative Analysis

MSZ 20992/5-1970

Shaanxi Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

DB61/T 1520-2021 Specification for performance evaluation of real-time fluorescence quantitative PCR analyzer

Professional Standard - Non-ferrous Metal, Absolute Fluorescence Quantitative Analysis

YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
YS/T 248.2-2007 Methods for chemical analysis of crude lead.Determination of tin content.Phenylfuorone photometric method and potassium iodate titrimetric method
YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
YS/T 703-2014 Method for chemical analysis of Limstone.Determination of element contents.X-ray fluorescence spectrometric method
YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 581.10-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 10:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 273.11-2006 Chemical analysis methods and physical properties of cryolite. Part 11:Determination of sulphur content by X-ray fluorescence spectrometric method
YS/T 581.16-2008 Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 575.23-2009 Method for chemical analysis of aluminum ores.Part 23:Determination of element contents X-ray fluorescence spectrometric method
YS/T 226.1-2009 Methods for chemical analysis of selenium.Part 1:Determination of bismuth content.Hydride generation-atomic fluorescence spectrometry
YS/T 226.2-2009 Methods for chemical analysis of selenium.Part 2:Determination of antimony content-Hydride generation-atomic fluorescence spectrometry
YS/T 74.1-2010 Methods for chemical analysis of cadmium- Part 1: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.2-2010 Methods for chemical analysis of cadmium- Part 2: Determination of antimony content- Hydride generation-atomic fluorescence spectrometry
YS/T 227.1-2010 Methods for chemical analysis of tellurium-Part 1: Determination of bismuth content-Hydride generation-atomic fluorescence spectrometry
YS/T 227.10-2010 Methods for chemical analysis of tellurium-Part 10: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.9-2010 Mehtods for chemical analysis of cadmium- Part 9:Determination of tin content- Hydride generation-atomic fluorescence spectrometry
YS/T 461.6-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 6:The determination of mercury content.Atomic fluorescence spectrometry
YS/T 276.1-2011 Methods for chemical analysis of indium.Part 1:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
YS/T 1605.5-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 5: Determination of antimony content— Atomic fluorescence spectrometry
YS/T 1605.4-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 4: Determination of tin content— Atomic fluorescence spectrometry
YS/T 746.15-2010 Methods for chemical analysis of lead-free tin-based solders- Part 15: Determination of Germanium content- Salicylfluorone-sim polyethylene glycol phenyl ether spectrophotometry
YS/T 581.18-2012 Chemical analysis methods and physical properties of Aluminum Fluoride.Part 18:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 273.15-2012 Chemical analysis methods and physical properties of cryolite.Part 15:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 520.9-2006 Gallium Chemical Analysis Method Phenylfluorone-Polyethylene Glycol Octyl Phenyl Ether Spectrophotometric Determination of Germanium
YS/T 1075.8-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 8:Determination of molybdenum and aluminium contents.X-ray fluorescence method
YS/T 556.6-2009 Methods for chemical analysis of antimony concentrates.Part 6:Determination of selenium content.Hydride generation-atomic fluorescence spectrometric method
YS/T 281.15-2011 Methods for chemical analysis of cobalt.Part 15:Determination of arsenic,antimony and bismuth content.Hydride generation-atomic fluorescence spectrometry
YS/T 276.2-2011 Methods for chemical analysis of indium.Part 2:Determination of tin content.Phenylfluorone-cetyltrimethyl ammonium bromide spectrophotometry
YS/T 745.8-2010 Methods for chemical analysis of copper anode slime- Part 8: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry method
YS/T 806-2012 Chemical analysis method for rare earth in aluminium and aluminium alloys.Determination of La,Ce,Pr,Nd,Sm contents X-ray fluorescence spectrometric method
YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method
YS/T 472.3-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of mercury content-Hydride generation-atomic fluorescence spectrometry
YS/T 472.5-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of arsenic content-Hydride generation-atomic fluorescence spectrometry
YS/T 520.6-2006 Gallium Chemical Analysis Method Salicylfluorone-Cetyltrimethylammonium Bromide Spectrophotometric Determination of Tin
YS/T 226.6-2009 Methods for chemical analysis of selenium.Part 6:Determination of sulfur content.Diphenylcarbazide spectrophotometry
YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
YS/T 520.6-2007 Chemical analysis of gallium.Part 6: Determination of tin content.The salicylfluorone cetyltrimethylammonium bromide spectrophotometric method
YS/T 520.9-2007 Chemical analysis of gallium.Part 9:Determination of germanium content.The phenylfluorone-polyethylene glycol octyl phenyl ether extraction spectrophotometric method
YS/T 820.19-2012 Methods for chemical analysis of laterite nickel ores.Part 19:Determination of aluminum,chromium,iron,magnesium,manganese,nickel and silicon contents.Energy-dispersive X-ray fluorescence spectrometry
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
YS/T 63.16-2019 Test method for carbonaceous materials used in the production of aluminium——Part 16: Determination of element contents——Wavelength dispersive X-ray fluorescence spectrometric method
YS/T 1115.14-2016 Methods for chemical analysis of copper ores and tailings.Part 14:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric and potassium bromate titrimetric method
YS/T 521.3-2009 Methods for chemical analysis of blister copper.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric method.Potassium bromate titration
YS/T 990.8-2014 Methods for chemical analysis of copper matte.Part 8:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry、silver diethyldithiocarbamate spectrophotometry and potassium bromate titrimetry
YS/T 276.8-2011 Methods for chemical analysis of indium.Part 8:Determination of bismuth content.Method 1:Hydride generation-atomic fluorescence spectrometry.Method 2:Flame atomic absorption spectrometry

American Society for Testing and Materials (ASTM), Absolute Fluorescence Quantitative Analysis

ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
ASTM D5839-96 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2023) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D7751-11 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D4927-05 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-96 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-01 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-02 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-15 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&x2014;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Absolute Fluorescence Quantitative Analysis

GB/T 7731.7-1987 Methods for chemical analysis of ferrotungsten--The phenylfluorone photometric method for the determination of tin content
GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
GB/T 6987.10-2001 Aluminium and aluminium alloys--Determination of tin content--Phenyl fluorone spectrophotometric method
GB/T 17416.2-1998 Method for chemical analysis of Zirconium ores.Determination of Zirconium and Hafnium contents.X-ray fluorescence spectrometric method
GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 8156.10-1987 Aluminium fluoride for industrial use--Determination of sulphur content--X-ray fluorescence spectrometric method
GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
GB/T 15917.3-1995 Dysprosium and dysprosium oxide--Determination of tantalum content--Para-chloride phenylfluorone--cetyl trimethyl ammonium bromide--ethanol spectrophotometric method
GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
GB/T 23364.2-2009 Methods for chemical analysis of high purity indium oxide.Part 2:Determination of tin content.Phenylfluorone spectrophotometry
GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23364.3-2009 Methods for chemical analysis of high purity indium oxide.Part 3:Determination of antimony content.Atomic fluorescenece spectrometry
GB/T 23362.2-2009 Methods for chemical analysis of high purity indium hydroxide.Part 2:Determination of tin content.Phenylfluorone spectrophotometry
GB/T 8971-1988 Analysis of Benzo(α)Dyrene in Airborne particulates matters by acctylated paper chromatography fluorescence spectrophotometric method
GB/T 14506.28-1993 Silicate rocks. Determination of contents of major and minor elements. X-ray fluorescence spectrometric method
GB/T 11066.9-2009 Methods for chemical analysis of gold.Determination for arsenic and tin contents.Hydride generation-atomic fluorescence spectrometry
GB/T 18116.3-2000 Yttrium-europium oxide-Determination of europium oxide content-Fluorescent spectrophotometric method
GB/T 23362.1-2009 Methods for chemical analysis of high purity indium hydroxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23362.3-2009 Methods for chemical analysis of high purity indium hydroxide.Part 3:Determination of antimony content.Atomic fluorescene spectrometry
GB/T 14849.5-2010 Chemical analysis of slion metal.Part 5: Determination of elements content.Analysis using an X-ray fluorescence method
GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
GB/T 36433-2018 Textiles.DNA quantitative analysis of cashmere and wool mixture.Fluorescence PCR method
GB/T 4325.3-1984 Methods for chemical analysis of molybdenum--The polyethylene glycol octyl phenyl ether-phenyl fluorine photometric method for the determination of tin content
GB/T 4324.3-1984 Methods for chemical analysis of tungsten--The polyethylene glycol octyl phenyl ether-phenylfluorone photometric method for the determination of tin content
GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
GB/T 4375.9-1984 Methods for chemical analysis of gallium--The phenylfluorone-polyethylene glycol octyl phenyl ether photometric method for the determination of germanium content
GB/T 14849.5-2014 Methods for chemical analysis of silicon metal.Part 5:Determination of impurity contents.X-ray fluorescence method
GB/T 20899.12-2016 Methods for chemical analysis of gold ores.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
GB/T 7739.12-2016 Methods for chemical analysis of gold concerntrates.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
GB/T 23273.3-2009 Methods for chemical analysis of cobalt oxatate.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
GB/T 3884.10-2012 Methods for chemical analysis of copper concentrates.Part 10:Determination of Antimony content.Hydride generation atomic fluorescence spectrometry method
GB/T 8151.10-2012 Methods for chemical analysis of zinc concentrates.Part 10:Determination of tin content.Hydride generation-atomic fluorescence spectrometry
GB/T 8151.11-2012 Methods for chemical analysis of zinc concentrates.Part 11:Determination of antimony content.Hydride generation-atomic fluorescence spectrometry
GB/T 6609.30-2009 Chemical analysis methods and determination of physical performance of alumina.Part 30:X-ray fluorescence spectrometric method for the determination content of trace elements
GB/T 6150.3-1985 Methods for chemical analysis of tungsten concentrates--The salicylfluorone-tetradecyl pyridine chloride photometric method for the determination of tin content
GB/T 4375.6-1984 Methods for chemical analysis of gallium--The salicylfluorone cetyl trimethyl ammonium bromide photometric method for the determination of tin content
GB/T 13293.2-1991 Higher purity copper cathode.Determination of bismuth content.Hydride generation-atomic fluorescence spectrometric method
GB/T 8151.13-2012 Methods for chemical analysis of zinc concentrates.Part 13:Determination of germanium content.Hydride generation-atomic fluorescence spectrometry and the phenyl fluorone spectrophptometric method
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 8151.7-2012 Methods for chemical analysis of zinc concentrates.Part 7:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry and the potassium bromate titrimetric method
GB/T 8152.11-2023 Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content by atomic fluorescence spectrometry and direct method of solid injection
GB/T 12690.29-2000 Rare earth metals and their oxide Determination of cerium oxide content-Fluorescent spectrophotometric method
GB/T 14353.8-1993 Methods for chemical analysis of copper ores lead ores and zinc ores. Determination of bismuth content. Hydride generationatomic fluorescence spectrometric method
GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 223.50-1994 Methods for chemical analysis of iron, steel and alloy. The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.30-1994 Methods for chemical analysis of iron,steel and alloy. The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 3884.9-2012 Methods for chemical analysis of copper concentrates.Part 9:Determination of arsenic and bismuth contents.Hydride generation-atomic fluorescence spectrometry method The potassium bromate titration method and The silver diethyl dithiocarbamate photometric
GB/T 6609.18-1986 Methods for the chemical analysis of aluminium oxide--The N,N-dimethyl-P-phenylenediamine photometric method for the determination of sulfate content
GB 223.30-1984 Methods for chemical analysis of iron,steel and alloy--The arsenazo 3 photometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 18882.2-2002 Chemical analysis methods for mixed rare earth oxide of ion-absorpted type RE ore-Determination of fifteen REO relative content--X-ray fluorescence spectrometric method
GB/T 6609.18-2004 Chemical analysis methods and determination of physical performance of alumina Determination of sulfate content-N,N-dimethyI-P-phenylenediamine spectrophotometric method
GB/T 12690.5-1990 Praseodymium oxide--Determination of lanthanum oxide, cerium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--X ray fluorescence spectrometric method
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

Professional Standard - Medicine, Absolute Fluorescence Quantitative Analysis

YY/T 1304.2-2015 Detection system of time-resolved fluoroimmunoassay.Part 2:Quantitative reagent (kit) for time-resolved fluoroimmunoassay

American National Standards Institute （ANSI), Absolute Fluorescence Quantitative Analysis

ANSI/ASTM D6247:1998 Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry

Professional Standard - Aviation, Absolute Fluorescence Quantitative Analysis

HB 5218.20-1995 Aluminum Alloy Chemical Analysis Method: Phenylfluorone Photometric Determination of Tin Content
HB/Z 5218.20-2004 Methods for chemical analysis of aluminium alloys-Part 20:Determination of tin content by phenyl fluorone spectrophotometric mehtod

工业和信息化部, Absolute Fluorescence Quantitative Analysis

YS/T 1033-2015 Determination of element content of dry anti-seepage materials by X-ray fluorescence spectrometry
YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
YS/T 806-2020 Chemical analysis methods for aluminum and aluminum alloys Determination of elemental content X-ray fluorescence spectrometry
YS/T 575.23-2021 Methods of chemical analysis of bauxite ores Part 23: Determination of elemental content X-ray fluorescence spectrometry
YS/T 581.15-2012 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of elemental content by X-ray fluorescence spectrometry (tablet pressing) method
YS/T 1288.3-2018 Methods for chemical analysis of high-purity zinc Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry
YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 445.3-2019 Methods for chemical analysis of silver concentrates Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry and potassium bromate titration
YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration
YS/T 1340-2019 Methods for chemical analysis of lead and lead alloys Determination of tin, antimony, arsenic, bismuth, copper, cadmium, calcium and silver contents Wavelength dispersive X-ray fluorescence spectrometry

Association Francaise de Normalisation, Absolute Fluorescence Quantitative Analysis

NF A06-358:1985 Chemical analysis of steel and cast iron. Determination of cerium content. Fluorimetric and amperometric method.
NF M07-095*NF EN ISO 14597:1999 Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry.
NF A24-003:1985 Chemical analysis of zinc ores concentrates. Accurate determination of zinc samples by X-ray fluorescence spectrometry on sample solution containing an internal standard.
NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif
NF ISO 22309:2012 Analyse par microfaisceaux - Analyse élémentaire quantitative par spectrométrie à sélection d'énergie (EDS) des éléments ayant un numéro atomique de 11 (Na) ou plus
NF B40-670-1*NF EN ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1 : apparatus, reagents, dissolution and gravimetric silica
NF B49-435-1*NF EN ISO 20565-1:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1 : apparatus, reagents, dissolution and determination of gravimetric silica
NF B49-329-1*NF EN ISO 10058-1:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1 : apparatus, reagents, dissolution and determination of gravimetric silica
NF EN 50414:2006 Méthodes d'analyse du plomb dans le PVC prélevé de l'enveloppe isolante et des gaines des câbles électriques et à fibres optiques - Méthode A : détermination de la teneur totale en plomb par spectrométrie atomique d'absorption dans la flamm...
NF EN ISO 10058-1:2009 Analyse chimique des produits de magnésie et de dolomie (méthode alternative à la méthode par fluorescense de rayons X) - Partie 1 : appareillage, réactifs, mise en solution et détermination de la teneur en silice par gravimétrie

海关总署, Absolute Fluorescence Quantitative Analysis

HS/T 52-2016 X-ray fluorescence quantitative analysis method for magnesium oxide series mineral products

Professional Standard - Geology, Absolute Fluorescence Quantitative Analysis

DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry
DZ/T 0064.11-2021 Analytical methods for groundwater quality - Part 11: Determination of arsenic content by hydride generation - atomic fluorescence spectrometry
DZ/T 0064.38-2021 Analytical methods for groundwater quality - Part 38: Determination of the amount of selenium by hydride generation - atomic fluorescence spectrometry
DZ/T 0279.14-2016 Methods of Analysis of Regional Geochemical Samples Part 14: Selenium Determination of Hydride Generation - Atomic Fluorescence Spectrometry
DZ/T 0279.17-2016 Methods of Analysis of Regional Geochemical Samples - Part 17: Determination of Mercury Vapor Generation - Cold Atomic Fluorescence Spectroscopy
DZ/T 0279.15-2016 Methods of Analysis of Regional Geochemical Samples Part 15: Determination of Germanium Quantity and Hydride Generation - Atomic Fluorescence Spectrometry
DZ/T 0253.2-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 2:Determination of selenium content.Fluorescent spectrophotometry
DZ/T 0279.10-2016 Methods of Analysis of Regional Geochemical Samples - Part 10: Determination of Chlorine and Bromine Quantification Powder Compression - X-ray Fluorescence Spectrometry
DZ/T 0279.13-2016 Methods of Analysis of Regional Geochemical Samples Part 13: Determination of Arsenic, Antimony, and Bismuth Determination of Hydride Generation—Atomic Fluorescence Spectrometry
DZ/T 0279.1-2016 Analytical methods of regional geochemical samples Part 1: Determination of 24 components such as aluminum oxide and other components by powder compression—X-ray fluorescence spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Absolute Fluorescence Quantitative Analysis

GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method
GB/T 13747.1-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 1：Determination of tin content—Potassium iodate titration and phenylfluorone-polyethylene glycoloctyl phenyl ether spectrophotometry

British Standards Institution (BSI), Absolute Fluorescence Quantitative Analysis

DD ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis
BS ISO 14706:2000 Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 14706:2014 Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 14706:2001 Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS EN ISO 14403-2:2012 Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA)
BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
BS PD CEN/TS 16621:2014 Food analysis. Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD)
BS EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Determination of oxygen content in aluminium nitride by XRF analysis
BS EN ISO 10058-1:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica
BS EN ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008)
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS EN ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Apparatus, reagents, dissolution and gravimetric silica
BS EN ISO 20565-1:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica
BS EN ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method).Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
19/30366984 DC BS ISO 21915-3. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 3. Blend quantification using spectral analysis method
BS EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

International Organization for Standardization (ISO), Absolute Fluorescence Quantitative Analysis

ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 21915-3:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 3: Blend quantification using spectral analysis method
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica
ISO/CD TS 20224-10:2004 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 10: Duck DNA detection method
ISO/DTS 20224-10:2023 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 10: Duck DNA detection method
ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 21915-2:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 2: Blend quantification using light microscopy method
ISO/CD TS 20224-11:2004 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 11: Pigeon DNA detection method
ISO/DTS 20224-11:2023 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 11: Pigeon DNA detection method
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

中华人民共和国环境保护部, Absolute Fluorescence Quantitative Analysis

GB 8971-1988 Air quality-Determination of benzo(a) pyrene in flying dust-Acetylated paper chromatography fluorescence spectrophotometric method

German Institute for Standardization, Absolute Fluorescence Quantitative Analysis

DIN 25703:1993 Determination of the uranium and plutonium content in nitric acid solutions by wavelength dispersive X-ray fluorescence analysis
DIN EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997); German version EN ISO 14597:1999
DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07
DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
DIN ISO 22309:2015-11 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
DIN 51769-12:2020-03 Petroleum products - Determination of low lead contents in gasolines - Part 12: Wavelength-dispersive-X-ray fluorescence analysis (XRF)
DIN 51418-2:2015-03 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN EN 50414:2007 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le
DIN EN ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica (ISO 21587-1:2007); English version of DIN EN ISO 21587-1:2007-12
DIN EN ISO 20565-1:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008); English version
DIN 51769-6:1990 Determination of total lead content of petrol with a lead content exceeding 25 mg/l by wavelenght-dispersive X-ray spectrometry (XRS)
DIN EN ISO 10058-1:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008); German version EN ISO 10058-1:2008

Jiangsu Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

DB32/T 4368-2022 Determination of Zearalenone in Feed by Time-Resolved Fluorescence Immunochromatographic Quantitative Method
DB32/T 4367-2022 Quantitative Time-Resolved Fluorescence Immunochromatographic Method for the Determination of Deoxynivalenol in Feed

Henan Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

DB41/T 1733-2018 Fluorescence Polarization Immunoassay for Rapid Determination of Fumonisin b1 Residue in Maize

Shandong Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

DB37/T 266-1999 X-ray fluorescence analysis method for the determination of the amount of waste slag added in building material products

Professional Standard - Commodity Inspection, Absolute Fluorescence Quantitative Analysis

SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum
SN/T 3318.2-2015 Chemical analysis of zirconium sand.Part 2:Determination of zirconium, iron and titanium contents.Wavelength dispersion X-ray fluorescence spectrometric method
SN/T 3321.3-2015 Analysis method of limestone and dolomite.Part 3:Determination of primary and secondary component content.Wavelength dispersive X-ray fluorescence spectrometric method
SN/T 2763.7-2014 Chemical analysis of nickel laterite ore.Part 7:determination of iron, nickel, silicon, aluminum, magnesium,calcium, titanium, manganese,copper and phosphorus content.Wavelength dispersive X-ray fluorescence spectrometry

BE-NBN, Absolute Fluorescence Quantitative Analysis

NBN P 33-001-1985 Zinc ores - Determination of zinc content

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Absolute Fluorescence Quantitative Analysis

GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method
GJB 5404.11-2005 Analysis methods for trace elements in super alloys Part 11: Determination of tin content byeryllium hydroxide coprecipitation phenyl fluorone spectrophotometric method
GJB 5404.4-2005 Analysis methods for trace elements in super alloys Part 4: Determination of cadium content by methyl isobutyl ketone extraction atomic fluorescence spectrometric method

Military Standard of the People's Republic of China-General Armament Department, Absolute Fluorescence Quantitative Analysis

GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry
GJB 8781.11-2015 Methods for trace element analysis of high-temperature alloys Part 11: Determination of tin content by beryllium hydroxide carrier precipitation-phenylfluorone spectrophotometric method
GJB 8781.4-2015 High temperature alloy trace element analysis method Part 4: Extraction and separation of methyl isobutyl ketone - Determination of cadmium content by atomic fluorescence spectrometry

Professional Standard - Ocean, Absolute Fluorescence Quantitative Analysis

HY/T 0347-2022 Determination of seawater trace ammonium—Flow analysis,solid phase extraction and o-phthaldialdehyde fluorescence detection

Professional Standard - Textile, Absolute Fluorescence Quantitative Analysis

FZ/T 01163-2022 Determination of total lead and total cadmium content in textiles and their accessories X-ray fluorescence spectrometry (XRF) analysis method

CU-NC, Absolute Fluorescence Quantitative Analysis

NC 80-73-1987 Fishing Industry. Fish and Fish By-Products. Fluorimetric Determination of Histamine Content Analysis Method

RU-GOST R, Absolute Fluorescence Quantitative Analysis

GOST 20461-1975 Gaseous helium. Method for determination of impurities volume fraction by emission spectral analysis
GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST R ISO 22309-2015 State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

European Committee for Standardization (CEN), Absolute Fluorescence Quantitative Analysis

EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
EN ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
EN ISO 15216-1:2017/A1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification - Amendment 1 (ISO 15216-1:2017/Amd 1:2021)
EN ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008)

Taiwan Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

CNS 12313-2005 Iron ores - Determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorous, sulfur and potassium - Wavelength dispersive X-ray fluorescence spectrometric method

KR-KS, Absolute Fluorescence Quantitative Analysis

KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

Professional Standard - Rare Earth, Absolute Fluorescence Quantitative Analysis

XB/T 620.1-2015 Chemical Analysis Methods of Waste Rare Earth Phosphor Powder Part 1: Determination of Total Rare Earth Oxides
XB/T 610.1-2007 Chemical analysis methods for samarium cobalt permanent magnet alloy powdep- Determination of samarium and cobalt- X-ray fluorescence sPedrometric method
XB/T 620.2-2015 Chemical Analysis Methods of Waste Rare Earth Phosphor Powder Part 2: Determination of Lead, Cadmium and Mercury Amounts by Inductively Coupled Plasma Emission Spectrometry

PL-PKN, Absolute Fluorescence Quantitative Analysis

PN H04239-1992 Chemical analysis of hardmetals. Determination of tantalum, niobium, cobalt, titanium and tungsten contents in solutions of samples by X-ray fluorescence spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Absolute Fluorescence Quantitative Analysis

GB/T 14352.21-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 21：Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
GB/T 14352.22-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 22：Determination of antimony content—Hydride generation atomic fluorescence spectrometry
GB/T 14506.33-2019 Methods for chemical analysis of silicate rocks—Part 33: Determination of arsenic, stibium, bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry
GB/T 6609.30-2022 Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 14353.19-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 19: Determination of tin content—Hydride generation atomic fluorescence spectrometry
GB/T 14353.21-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 21: Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
GB/T 3884.21-2018 Methods for chemical analysis of copper concentrates－Part 21:Determination of copper,sulfur,lead,zinc,iron, aluminium,calcium,magnesium,manganese content－Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 8151.22-2020 Methods for chemical analysis of zinc concentrates—Part 22: Determination of zinc, copper, lead,iron,aluminium ,calcium and magnesium contents—Wavelength dispersive X-ray fluorescence spectrometric method

Anhui Provincial Standard of the People's Republic of China, Absolute Fluorescence Quantitative Analysis

DB34/T 2127.2-2014 Methods of Analysis of Samples for Regional Geochemical Surveys Part 2: Determination of Multielement Content by X-ray Fluorescence Spectrometry
DB34/T 2127.7-2014 Analytical methods of regional geochemical survey samples Part 7: Determination of arsenic, antimony, bismuth and mercury by atomic fluorescence spectrometry

Professional Standard - Agriculture, Absolute Fluorescence Quantitative Analysis

LS/T 6143-2023 Inspection of grain and oils-Determination of aflatoxin B₁, in cereals-Time-resolved fluorescent immunochromatographic method

Professional Standard - Nuclear Industry, Absolute Fluorescence Quantitative Analysis

EJ/T 1212.3-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part3: Determination of gadolinia content by wavelength dispersive X-ray fluorescen spectrometry
EJ/T 1212.3-2018 Analytical methods for sintered gadolinia-uranium dioxide pellets - Part 3: Determination of digadolinium trioxide content by wavelength dispersive X-ray fluorescence spectrometry

European Committee for Electrotechnical Standardization（CENELEC）, Absolute Fluorescence Quantitative Analysis

EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

Danish Standards Foundation, Absolute Fluorescence Quantitative Analysis

DS/EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le
DS/ENV 725-4:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
DS/ISO/TS 21569-2:2021 Molecular biomarker analysis – Methods of analysis for the detection of genetically modified organisms and derived products – Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products

Lithuanian Standards Office , Absolute Fluorescence Quantitative Analysis

LST EN 50414-2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

AENOR, Absolute Fluorescence Quantitative Analysis

UNE-EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

ES-AENOR, Absolute Fluorescence Quantitative Analysis

UNE 80-211-1994 Test methods for cements. Chemical analysis. Determination of the chemical composition of limes and limestones by X-ray fluorescence
UNE 80-210-1994 Test methods for cements. Chemical analysis. Determination of the chemical composition of portland clinker and cements by X-ray fluorescence

AT-ON, Absolute Fluorescence Quantitative Analysis

ONORM ENV 725-4-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

IN-BIS, Absolute Fluorescence Quantitative Analysis

IS 12473 Pt.6-1988

Professional Standard - Machinery, Absolute Fluorescence Quantitative Analysis

JB/T 6237.1-2008 Test methods for chemical analysis of silver powder for electric contact material. Part 1: Determination of silver content

ZA-SANS, Absolute Fluorescence Quantitative Analysis

SANS 409:2006 Coal and coke - Analysis and testing - Determination of trace elements - Coal, coke and fly-ash - Determination of eleven trace elements - Flame atomic absorption spectrometric method